void SDRDevicesDialog::refreshDeviceProperties() {
SDRDeviceInfo *selDev = getSelectedDevice(devTree->GetSelection());
if (selDev && selDev->isAvailable()) {
dev = selDev;
selId = devTree->GetSelection();
DeviceConfig *devConfig = wxGetApp().getConfig()->getDevice(dev->getName());
m_propertyGrid->Clear();
SoapySDR::Device *soapyDev = dev->getSoapyDevice();
SoapySDR::ArgInfoList args = soapyDev->getSettingInfo();
//A) General settings: name, offset, sample rate, agc, antennas (if > 1)
m_propertyGrid->Append(new wxPropertyCategory("General Settings"));
devSettings.clear();
//A-1) Name
devSettings["name"] = m_propertyGrid->Append( new wxStringProperty("Name", wxPG_LABEL, devConfig->getDeviceName()) );
//A-2) Offset
devSettings["offset"] = m_propertyGrid->Append( new wxIntProperty("Offset (KHz)", wxPG_LABEL, devConfig->getOffset() / 1000) );
//A-3) Antennas, is there are more than 1 RX antenna, else do not expose the setting.
//get the saved setting
const std::string& currentSetAntenna = devConfig->getAntennaName();
//compare to the list of existing antennas
SoapySDR::ArgInfo antennasArg;
std::vector<std::string> antennaOpts = selDev->getAntennaNames(SOAPY_SDR_RX, 0);
//only do something if there is more than 1 antenna
if (antennaOpts.size() > 1) {
//by default, choose the first of the list.
std::string antennaToSelect = antennaOpts.front();
auto found_i = std::find(antennaOpts.begin(), antennaOpts.end(), currentSetAntenna);
if (found_i != antennaOpts.end()) {
antennaToSelect = currentSetAntenna;
}
else {
//erroneous antenna name, re-write device config with the first choice of teh list.
devConfig->setAntennaName(antennaToSelect);
}
//build device settings
for (std::string antenna : antennaOpts) {
antennasArg.options.push_back(antenna);
antennasArg.optionNames.push_back(antenna);
}
antennasArg.type = SoapySDR::ArgInfo::STRING;
antennasArg.units = "";
antennasArg.name = "Antenna";
antennasArg.key = "antenna";
antennasArg.value = antennaToSelect;
devSettings["antenna"] = addArgInfoProperty(m_propertyGrid, antennasArg);
deviceArgs["antenna"] = antennasArg;
} //end if more than 1 antenna
else {
devConfig->setAntennaName("");
}
//A-4) Sample_rate:
long currentSampleRate = wxGetApp().getSampleRate();
long deviceSampleRate = devConfig->getSampleRate();
if (!deviceSampleRate) {
deviceSampleRate = selDev->getSampleRateNear(SOAPY_SDR_RX, 0, currentSampleRate);
}
SoapySDR::ArgInfo sampleRateArg;
std::vector<long> rateOpts = selDev->getSampleRates(SOAPY_SDR_RX, 0);
for (long rate : rateOpts) {
sampleRateArg.options.push_back(std::to_string(rate));
sampleRateArg.optionNames.push_back(frequencyToStr(rate));
}
sampleRateArg.type = SoapySDR::ArgInfo::STRING;
sampleRateArg.units = "Hz";
sampleRateArg.name = "Sample Rate";
sampleRateArg.key = "sample_rate";
sampleRateArg.value = std::to_string(deviceSampleRate);
devSettings["sample_rate"] = addArgInfoProperty(m_propertyGrid, sampleRateArg);
deviceArgs["sample_rate"] = sampleRateArg;
//B) Runtime Settings:
runtimeArgs.clear();
runtimeProps.clear();
streamProps.clear();
if (args.size()) {
m_propertyGrid->Append(new wxPropertyCategory("Run-time Settings"));
for (SoapySDR::ArgInfoList::const_iterator args_i = args.begin(); args_i != args.end(); args_i++) {
SoapySDR::ArgInfo arg = (*args_i);
//We-reread the Device configuration, else we use the user settings.
if (dev) {
//Apply saved settings
DeviceConfig *devConfig = wxGetApp().getConfig()->getDevice(dev->getDeviceId());
arg.value = devConfig->getSetting(arg.key, soapyDev->readSetting(arg.key)); //use SoapyDevice data as fallback.
}
else {
//re-read the SoapyDevice
arg.value = soapyDev->readSetting(arg.key);
}
runtimeProps[arg.key] = addArgInfoProperty(m_propertyGrid, arg);
runtimeArgs[arg.key] = arg;
}
}
if (dev) {
args = dev->getSoapyDevice()->getStreamArgsInfo(SOAPY_SDR_RX, 0);
DeviceConfig *devConfig = wxGetApp().getConfig()->getDevice(dev->getDeviceId());
ConfigSettings devStreamOpts = devConfig->getStreamOpts();
if (devStreamOpts.size()) {
for (int j = 0, jMax = args.size(); j < jMax; j++) {
if (devStreamOpts.find(args[j].key) != devStreamOpts.end()) {
args[j].value = devStreamOpts[args[j].key];
}
}
}
if (args.size()) {
m_propertyGrid->Append(new wxPropertyCategory("Stream Settings"));
for (SoapySDR::ArgInfo arg : args) {
streamProps[arg.key] = addArgInfoProperty(m_propertyGrid, arg);
}
}
}
if (selDev->isManual()) {
m_addRemoteButton->SetLabel("Remove");
removeId = selId;
} else {
m_addRemoteButton->SetLabel("Add");
removeId = nullptr;
}
} else if (selDev && !selDev->isAvailable() && selDev->isManual()) {
m_propertyGrid->Clear();
devSettings.clear();
runtimeArgs.clear();
runtimeProps.clear();
streamProps.clear();
removeId = devTree->GetSelection();
dev = nullptr;
selId = nullptr;
editId = nullptr;
m_addRemoteButton->SetLabel("Remove");
} else if (!selDev) {
m_addRemoteButton->SetLabel("Add");
removeId = nullptr;
}
}
void SDRDevicesDialog::OnSelectionChanged( wxTreeEvent& event ) {
SDRDeviceInfo *selDev = getSelectedDevice(devTree->GetSelection());
if (selDev && selDev->isAvailable()) {
dev = selDev;
selId = devTree->GetSelection();
DeviceConfig *devConfig = wxGetApp().getConfig()->getDevice(dev->getName());
m_propertyGrid->Clear();
SoapySDR::ArgInfoList args = dev->getSettingsArgInfo();
SoapySDR::ArgInfoList::const_iterator args_i;
m_propertyGrid->Append(new wxPropertyCategory("General Settings"));
devSettings.erase(devSettings.begin(),devSettings.end());
devSettings["name"] = m_propertyGrid->Append( new wxStringProperty("Name", wxPG_LABEL, devConfig->getDeviceName()) );
devSettings["offset"] = m_propertyGrid->Append( new wxIntProperty("Offset (Hz)", wxPG_LABEL, devConfig->getOffset()) );
props.erase(props.begin(), props.end());
if (args.size()) {
m_propertyGrid->Append(new wxPropertyCategory("Run-time Settings"));
for (args_i = args.begin(); args_i != args.end(); args_i++) {
SoapySDR::ArgInfo arg = (*args_i);
props.push_back(addArgInfoProperty(m_propertyGrid, arg));
}
}
if (dev->getRxChannel()) {
args = dev->getRxChannel()->getStreamArgsInfo();
DeviceConfig *devConfig = wxGetApp().getConfig()->getDevice(dev->getDeviceId());
ConfigSettings devStreamOpts = devConfig->getStreamOpts();
if (devStreamOpts.size()) {
for (int j = 0, jMax = args.size(); j < jMax; j++) {
if (devStreamOpts.find(args[j].key) != devStreamOpts.end()) {
args[j].value = devStreamOpts[args[j].key];
}
}
}
if (args.size()) {
m_propertyGrid->Append(new wxPropertyCategory("Stream Settings"));
for (args_i = args.begin(); args_i != args.end(); args_i++) {
SoapySDR::ArgInfo arg = (*args_i);
props.push_back(addArgInfoProperty(m_propertyGrid, arg));
}
}
}
if (selDev->isManual()) {
m_addRemoteButton->SetLabel("Remove");
removeId = selId;
} else {
m_addRemoteButton->SetLabel("Add");
removeId = nullptr;
}
} else if (selDev && !selDev->isAvailable() && selDev->isManual()) {
m_propertyGrid->Clear();
devSettings.erase(devSettings.begin(),devSettings.end());
props.erase(props.begin(), props.end());
removeId = devTree->GetSelection();
dev = nullptr;
selId = nullptr;
editId = nullptr;
m_addRemoteButton->SetLabel("Remove");
} else if (!selDev) {
m_addRemoteButton->SetLabel("Add");
removeId = nullptr;
}
event.Skip();
}
std::vector<SDRDeviceInfo *> *SDREnumerator::enumerate_devices(std::string remoteAddr, bool noInit) {
if (SDREnumerator::devs[remoteAddr].size()) {
return &SDREnumerator::devs[remoteAddr];
}
if (noInit) {
return NULL;
}
if (!soapy_initialized) {
std::cout << "SoapySDR init.." << std::endl;
std::cout << "\tAPI Version: v" << SoapySDR::getAPIVersion() << std::endl;
std::cout << "\tABI Version: v" << SoapySDR::getABIVersion() << std::endl;
std::cout << "\tInstall root: " << SoapySDR::getRootPath() << std::endl;
std::cout << "\tLoading modules... " << std::endl;
std::string userModPath = wxGetApp().getModulePath();
if (userModPath != "") {
wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, "Loading SoapySDR modules from " + userModPath + "..");
std::vector<std::string> localMods = SoapySDR::listModules(userModPath);
for (std::vector<std::string>::iterator mods_i = localMods.begin(); mods_i != localMods.end(); mods_i++) {
wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, "Initializing user specified SoapySDR module " + (*mods_i) + "..");
std::cout << "Initializing user specified SoapySDR module " << (*mods_i) << ".." << std::endl;
SoapySDR::loadModule(*mods_i);
}
} else {
#ifdef BUNDLE_SOAPY_MODS
bool localModPref = wxGetApp().getUseLocalMod();
if (localModPref) {
wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, "Loading SoapySDR modules..");
std::cout << "Checking local system SoapySDR modules.." << std::flush;
SoapySDR::loadModules();
}
wxFileName exePath = wxFileName(wxStandardPaths::Get().GetExecutablePath());
std::vector<std::string> localMods = SoapySDR::listModules(exePath.GetPath().ToStdString() + "/modules/");
for (std::vector<std::string>::iterator mods_i = localMods.begin(); mods_i != localMods.end(); mods_i++) {
wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, "Initializing bundled SoapySDR module " + (*mods_i) + "..");
std::cout << "Loading bundled SoapySDR module " << (*mods_i) << ".." << std::endl;
SoapySDR::loadModule(*mods_i);
}
if (!localModPref) {
wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, "Loading SoapySDR modules..");
std::cout << "Checking system SoapySDR modules.." << std::flush;
SoapySDR::loadModules();
}
#else
wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, "Loading SoapySDR modules..");
SoapySDR::loadModules();
#endif
}
if (SDREnumerator::factories.size()) {
SDREnumerator::factories.erase(SDREnumerator::factories.begin(), SDREnumerator::factories.end());
}
std::cout << "\tAvailable factories...";
SoapySDR::FindFunctions factories = SoapySDR::Registry::listFindFunctions();
for (SoapySDR::FindFunctions::const_iterator it = factories.begin(); it != factories.end(); ++it) {
if (it != factories.begin()) {
std::cout << ", ";
}
std::cout << it->first;
if (it->first == "remote") {
has_remote = true;
}
SDREnumerator::factories.push_back(it->first);
}
if (factories.empty()) {
std::cout << "No factories found!" << std::endl;
}
if ((factories.size() == 1) && factories.find("null") != factories.end()) {
std::cout << "Just 'null' factory found." << std::endl;
wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_FAILED, std::string("No modules available."));
}
std::cout << std::endl;
soapy_initialized = true;
}
modules = SoapySDR::listModules();
std::vector<SoapySDR::Kwargs> results;
SoapySDR::Kwargs enumArgs;
bool isRemote = false;
if (remoteAddr.length()) {
std::cout << "Enumerating remote address: " << remoteAddr << std::endl;
enumArgs["driver"] = "remote";
enumArgs["remote"] = remoteAddr;
isRemote = true;
results = SoapySDR::Device::enumerate(enumArgs);
} else {
results = SoapySDR::Device::enumerate();
}
int manualsIdx = results.size();
std::vector<std::string> manualParams;
std::vector<bool> manualResult;
if (manuals.size()) {
for (std::vector<SDRManualDef>::const_iterator m_i = manuals.begin(); m_i != manuals.end(); m_i++) {
std::vector<SoapySDR::Kwargs> manual_result;
std::string strDevArgs = "driver="+m_i->factory+","+m_i->params;
manualParams.push_back(m_i->params);
wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, std::string("Enumerating manual device '") + strDevArgs + "'..");
manual_result = SoapySDR::Device::enumerate(strDevArgs);
if (manual_result.size()) {
for (std::vector<SoapySDR::Kwargs>::const_iterator i = manual_result.begin(); i != manual_result.end(); i++) {
results.push_back(*i);
manualResult.push_back(true);
}
} else {
SoapySDR::Kwargs failedEnum;
failedEnum = argsStrToKwargs(strDevArgs);
failedEnum["label"] = "Not Found ("+m_i->factory+")";
results.push_back(failedEnum);
manualResult.push_back(false);
}
}
}
if (isRemote) {
wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, std::string("Opening remote server ") + remoteAddr + "..");
}
for (size_t i = 0; i < results.size(); i++) {
SDRDeviceInfo *dev = new SDRDeviceInfo();
SoapySDR::Kwargs deviceArgs = results[i];
for (SoapySDR::Kwargs::const_iterator it = deviceArgs.begin(); it != deviceArgs.end(); ++it) {
std::cout << " " << it->first << " = " << it->second << std::endl;
if (it->first == "driver") {
dev->setDriver(it->second);
} else if (it->first == "label" || it->first == "device") {
dev->setName(it->second);
}
}
if (deviceArgs.count("remote")) {
isRemote = true;
} else {
isRemote = false;
}
dev->setRemote(isRemote);
dev->setManual(i>=manualsIdx);
if (i>=manualsIdx) {
dev->setManualParams(manualParams[i-manualsIdx]);
}
std::cout << "Make device " << i << std::endl;
if (i<manualsIdx || manualResult[i-manualsIdx]) try {
SoapySDR::Device *device = SoapySDR::Device::make(deviceArgs);
SoapySDR::Kwargs info = device->getHardwareInfo();
for (SoapySDR::Kwargs::const_iterator it = info.begin(); it != info.end(); ++it) {
std::cout << " " << it->first << "=" << it->second << std::endl;
if (it->first == "hardware") {
dev->setHardware(it->second);
}
}
if (isRemote) {
wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, "Querying remote " + remoteAddr + " device #" + std::to_string(i) + ": " + dev-> getName());
} else {
wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, std::string("Querying device #") + std::to_string(i) + ": " + dev->getName());
}
SoapySDR::ArgInfoList settingsInfo = device->getSettingInfo();
DeviceConfig *cfg = wxGetApp().getConfig()->getDevice(dev->getDeviceId());
ConfigSettings devSettings = cfg->getSettings();
if (devSettings.size()) {
for (ConfigSettings::const_iterator set_i = devSettings.begin(); set_i != devSettings.end(); set_i++) {
deviceArgs[set_i->first] = set_i->second;
}
for (int j = 0; j < settingsInfo.size(); j++) {
if (deviceArgs.find(settingsInfo[j].key) != deviceArgs.end()) {
settingsInfo[j].value = deviceArgs[settingsInfo[j].key];
}
}
}
dev->setDeviceArgs(deviceArgs);
dev->setSettingsInfo(settingsInfo);
int numChan = device->getNumChannels(SOAPY_SDR_RX);
for (int i = 0; i < numChan; i++) {
SDRDeviceChannel *chan = new SDRDeviceChannel();
SoapySDR::RangeList rfRange = device->getFrequencyRange(SOAPY_SDR_RX, i);
double rfMin = rfRange[0].minimum();
double rfMax = rfRange[rfRange.size()-1].maximum();
chan->setChannel(i);
chan->setFullDuplex(device->getFullDuplex(SOAPY_SDR_RX, i));
chan->setRx(true);
chan->setTx(false);
chan->getRFRange().setLow(rfMin);
chan->getRFRange().setHigh(rfMax);
std::vector<std::string> freqs = device->listFrequencies(SOAPY_SDR_RX,i);
if (std::find(freqs.begin(), freqs.end(), "CORR") != freqs.end()) {
chan->setCORR(true);
} else {
chan->setCORR(false);
}
if (device->hasDCOffsetMode(SOAPY_SDR_RX, i)) {
chan->setHardwareDC(true);
} else {
chan->setHardwareDC(false);
}
std::vector<double> rates = device->listSampleRates(SOAPY_SDR_RX, i);
for (std::vector<double>::iterator i = rates.begin(); i != rates.end(); i++) {
chan->getSampleRates().push_back((long)(*i));
}
ConfigSettings devStreamOpts = cfg->getStreamOpts();
if (devStreamOpts.size()) {
dev->setStreamArgs(devStreamOpts);
}
SoapySDR::ArgInfoList optArgs = device->getStreamArgsInfo(SOAPY_SDR_RX, i);
if (devStreamOpts.size()) {
for (int j = 0, jMax = optArgs.size(); j < jMax; j++) {
if (devStreamOpts.find(optArgs[j].key) != devStreamOpts.end()) {
optArgs[j].value = devStreamOpts[optArgs[j].key];
}
}
}
chan->setStreamArgsInfo(optArgs);
std::vector<std::string> gainNames = device->listGains(SOAPY_SDR_RX, i);
for (std::vector<std::string>::iterator gname = gainNames.begin(); gname!= gainNames.end(); gname++) {
chan->addGain((*gname),device->getGainRange(SOAPY_SDR_RX, i, (*gname)));
}
dev->addChannel(chan);
}
SoapySDR::Device::unmake(device);
dev->setAvailable(true);
} catch (const std::exception &ex) {
std::cerr << "Error making device: " << ex.what() << std::endl;
wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, std::string("Error querying device #") + std::to_string(i));
dev->setAvailable(false);
} else {
dev->setAvailable(false);
}
std::cout << std::endl;
SDREnumerator::devs[remoteAddr].push_back(dev);
}
if (SDREnumerator::devs[remoteAddr].empty()) {
wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, std::string("No devices found!"));
}
std::cout << std::endl;
return &SDREnumerator::devs[remoteAddr];
}
void SDRDevicesDialog::refreshDeviceProperties() {
SDRDeviceInfo *selDev = getSelectedDevice(devTree->GetSelection());
if (selDev && selDev->isAvailable()) {
dev = selDev;
selId = devTree->GetSelection();
DeviceConfig *devConfig = wxGetApp().getConfig()->getDevice(dev->getName());
m_propertyGrid->Clear();
SoapySDR::Device *soapyDev = dev->getSoapyDevice();
SoapySDR::ArgInfoList args = soapyDev->getSettingInfo();
SoapySDR::ArgInfoList::const_iterator args_i;
m_propertyGrid->Append(new wxPropertyCategory("General Settings"));
devSettings.erase(devSettings.begin(),devSettings.end());
devSettings["name"] = m_propertyGrid->Append( new wxStringProperty("Name", wxPG_LABEL, devConfig->getDeviceName()) );
devSettings["offset"] = m_propertyGrid->Append( new wxIntProperty("Offset (Hz)", wxPG_LABEL, devConfig->getOffset()) );
runtimeArgs.erase(runtimeArgs.begin(), runtimeArgs.end());
runtimeProps.erase(runtimeProps.begin(), runtimeProps.end());
streamProps.erase(streamProps.begin(), streamProps.end());
if (args.size()) {
m_propertyGrid->Append(new wxPropertyCategory("Run-time Settings"));
for (args_i = args.begin(); args_i != args.end(); args_i++) {
SoapySDR::ArgInfo arg = (*args_i);
arg.value = soapyDev->readSetting(arg.key);
runtimeProps[arg.key] = addArgInfoProperty(m_propertyGrid, arg);
runtimeArgs[arg.key] = arg;
}
}
if (dev) {
args = dev->getSoapyDevice()->getStreamArgsInfo(SOAPY_SDR_RX, 0);
DeviceConfig *devConfig = wxGetApp().getConfig()->getDevice(dev->getDeviceId());
ConfigSettings devStreamOpts = devConfig->getStreamOpts();
if (devStreamOpts.size()) {
for (int j = 0, jMax = args.size(); j < jMax; j++) {
if (devStreamOpts.find(args[j].key) != devStreamOpts.end()) {
args[j].value = devStreamOpts[args[j].key];
}
}
}
if (args.size()) {
m_propertyGrid->Append(new wxPropertyCategory("Stream Settings"));
for (args_i = args.begin(); args_i != args.end(); args_i++) {
SoapySDR::ArgInfo arg = (*args_i);
streamProps[arg.key] = addArgInfoProperty(m_propertyGrid, arg);
}
}
}
if (selDev->isManual()) {
m_addRemoteButton->SetLabel("Remove");
removeId = selId;
} else {
m_addRemoteButton->SetLabel("Add");
removeId = nullptr;
}
} else if (selDev && !selDev->isAvailable() && selDev->isManual()) {
m_propertyGrid->Clear();
devSettings.erase(devSettings.begin(),devSettings.end());
runtimeArgs.erase(runtimeArgs.begin(), runtimeArgs.end());
runtimeProps.erase(runtimeProps.begin(), runtimeProps.end());
streamProps.erase(streamProps.begin(), streamProps.end());
removeId = devTree->GetSelection();
dev = nullptr;
selId = nullptr;
editId = nullptr;
m_addRemoteButton->SetLabel("Remove");
} else if (!selDev) {
m_addRemoteButton->SetLabel("Add");
removeId = nullptr;
}
}