void InitializeDirectX()
{
UINT createDeviceFlags = 0;
#if defined(DEBUG) || defined(_DEBUG)
createDeviceFlags |= D3D11_CREATE_DEVICE_DEBUG;
#endif
D3D_FEATURE_LEVEL featureLevels[] = {
D3D_FEATURE_LEVEL_11_0,
D3D_FEATURE_LEVEL_10_1,
D3D_FEATURE_LEVEL_10_0
};
ID3D11Device* direct3DDevice = nullptr;
ID3D11DeviceContext* direct3DDeviceContext = nullptr;
ThrowIfFailed(D3D11CreateDevice(NULL, D3D_DRIVER_TYPE_HARDWARE, NULL, createDeviceFlags, featureLevels, ARRAYSIZE(featureLevels), D3D11_SDK_VERSION, &direct3DDevice, &mFeatureLevel, &direct3DDeviceContext), "D3D11CreateDevice() failed");
ThrowIfFailed(direct3DDevice->QueryInterface(__uuidof(ID3D11Device1), reinterpret_cast<void**>(&mDirect3DDevice)), "ID3D11Device::QueryInterface() failed");
ThrowIfFailed(direct3DDeviceContext->QueryInterface(__uuidof(ID3D11DeviceContext1), reinterpret_cast<void**>(&mDirect3DDeviceContext)), "ID3D11Device::QueryInterface() failed");
ReleaseObject(direct3DDevice);
ReleaseObject(direct3DDeviceContext);
UINT multiSamplingCount = 4;
UINT multiSamplingQualityLevels;
mDirect3DDevice->CheckMultisampleQualityLevels(DXGI_FORMAT_R8G8B8A8_UNORM, multiSamplingCount, &multiSamplingQualityLevels);
if (multiSamplingQualityLevels == 0)
{
throw GameException("Unsupported multi-sampling quality");
}
DXGI_SWAP_CHAIN_DESC1 swapChainDesc;
ZeroMemory(&swapChainDesc, sizeof(swapChainDesc));
swapChainDesc.Width = mScreenWidth;
swapChainDesc.Height = mScreenHeight;
swapChainDesc.Format = DXGI_FORMAT_R8G8B8A8_UNORM;
swapChainDesc.SampleDesc.Count = multiSamplingCount;
swapChainDesc.SampleDesc.Quality = multiSamplingQualityLevels - 1;
swapChainDesc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT;
swapChainDesc.BufferCount = 1;
swapChainDesc.SwapEffect = DXGI_SWAP_EFFECT_DISCARD;
IDXGIDevice* dxgiDevice = nullptr;
ThrowIfFailed(mDirect3DDevice->QueryInterface(__uuidof(IDXGIDevice), reinterpret_cast<void**>(&dxgiDevice)), "ID3D11Device::QueryInterface() failed");
IDXGIAdapter *dxgiAdapter = nullptr;
HRESULT hr;
if (FAILED(hr = dxgiDevice->GetParent(__uuidof(IDXGIAdapter), reinterpret_cast<void**>(&dxgiAdapter))))
{
ReleaseObject(dxgiDevice);
throw GameException("IDXGIDevice::GetParent() failed retrieving adapter.", hr);
}
IDXGIFactory2* dxgiFactory = nullptr;
if (FAILED(hr = dxgiAdapter->GetParent(__uuidof(IDXGIFactory2), reinterpret_cast<void**>(&dxgiFactory))))
{
ReleaseObject(dxgiDevice);
ReleaseObject(dxgiAdapter);
throw GameException("IDXGIAdapter::GetParent() failed retrieving factory.", hr);
}
DXGI_SWAP_CHAIN_FULLSCREEN_DESC fullScreenDesc;
ZeroMemory(&fullScreenDesc, sizeof(fullScreenDesc));
fullScreenDesc.RefreshRate.Numerator = 60;
fullScreenDesc.RefreshRate.Denominator = 1;
fullScreenDesc.Windowed = true;
if (FAILED(hr = dxgiFactory->CreateSwapChainForHwnd(dxgiDevice, mWindowHandle, &swapChainDesc, &fullScreenDesc, nullptr, &mSwapChain)))
{
ReleaseObject(dxgiDevice);
ReleaseObject(dxgiAdapter);
ReleaseObject(dxgiFactory);
throw GameException("IDXGIDevice::CreateSwapChainForHwnd() failed.", hr);
}
ReleaseObject(dxgiDevice);
ReleaseObject(dxgiAdapter);
ReleaseObject(dxgiFactory);
ID3D11Texture2D* backBuffer;
ThrowIfFailed(mSwapChain->GetBuffer(0, __uuidof(ID3D11Texture2D), reinterpret_cast<void**>(&backBuffer)), "IDXGISwapChain::GetBuffer() failed.");
if (FAILED(hr = mDirect3DDevice->CreateRenderTargetView(backBuffer, nullptr, &mRenderTargetView)))
{
ReleaseObject(backBuffer);
throw GameException("IDXGIDevice::CreateRenderTargetView() failed.", hr);
}
ReleaseObject(backBuffer);
D3D11_TEXTURE2D_DESC depthStencilDesc;
ZeroMemory(&depthStencilDesc, sizeof(depthStencilDesc));
depthStencilDesc.Width = mScreenWidth;
depthStencilDesc.Height = mScreenHeight;
depthStencilDesc.MipLevels = 1;
depthStencilDesc.ArraySize = 1;
depthStencilDesc.Format = DXGI_FORMAT_D24_UNORM_S8_UINT;
depthStencilDesc.BindFlags = D3D11_BIND_DEPTH_STENCIL;
depthStencilDesc.Usage = D3D11_USAGE_DEFAULT;
depthStencilDesc.SampleDesc.Count = multiSamplingCount;
depthStencilDesc.SampleDesc.Quality = multiSamplingQualityLevels - 1;
ThrowIfFailed(mDirect3DDevice->CreateTexture2D(&depthStencilDesc, nullptr, &mDepthStencilBuffer), "IDXGIDevice::CreateTexture2D() failed.");
ThrowIfFailed(mDirect3DDevice->CreateDepthStencilView(mDepthStencilBuffer, nullptr, &mDepthStencilView), "IDXGIDevice::CreateDepthStencilView() failed.");
D3D11_VIEWPORT viewport;
viewport.TopLeftX = 0.0f;
viewport.TopLeftY = 0.0f;
viewport.Width = static_cast<float>(mScreenWidth);
viewport.Height = static_cast<float>(mScreenHeight);
viewport.MinDepth = 0.0f;
viewport.MaxDepth = 1.0f;
mDirect3DDeviceContext->OMSetRenderTargets(1, &mRenderTargetView, mDepthStencilView);
mDirect3DDeviceContext->RSSetViewports(1, &viewport);
}
int ContextD3D11::CreateWindowSizeDependentResources(uint32_t width, uint32_t height) {
ID3D11RenderTargetView* nullViews[] = {nullptr};
device_context_->OMSetRenderTargets(ARRAYSIZE(nullViews), nullViews, nullptr);
SafeRelease(&render_target_view_);
SafeRelease(&depth_stencil_view_);
device_context_->Flush();
//RECT rc;
//GetClientRect( window_handle_, &rc );
width_ = width;//rc.right - rc.left;
height_ = height;//rc.bottom - rc.top;
if(swap_chain_ != nullptr)
{
swap_chain_->ResizeBuffers(2, static_cast<UINT>(width_),static_cast<UINT>(height_), DXGI_FORMAT_B8G8R8A8_UNORM, 0);
}
else
{
// Otherwise, create a new one using the same adapter as the existing Direct3D device.
DXGI_SWAP_CHAIN_DESC1 swapChainDesc = {0};
swapChainDesc.Width = static_cast<UINT>(width_); // Match the size of the window.
swapChainDesc.Height = static_cast<UINT>(height_);
swapChainDesc.Format = DXGI_FORMAT_B8G8R8A8_UNORM; // This is the most common swap chain format.
swapChainDesc.Stereo = false;
swapChainDesc.SampleDesc.Count = 1; // Don't use multi-sampling.
swapChainDesc.SampleDesc.Quality = 0;
swapChainDesc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT;
swapChainDesc.BufferCount = 2; // Use double-buffering to minimize latency.
swapChainDesc.Scaling = DXGI_SCALING_NONE;
swapChainDesc.SwapEffect = DXGI_SWAP_EFFECT_FLIP_SEQUENTIAL; // All Windows Store apps must use this SwapEffect.
swapChainDesc.Flags = DXGI_SWAP_CHAIN_FLAG_ALLOW_MODE_SWITCH;
IDXGIDevice1* dxgiDevice;
device_->QueryInterface(__uuidof(dxgiDevice),(void**)&dxgiDevice);
//IDXGIAdapter* dxgiAdapter;
//dxgiDevice->GetAdapter(&dxgiAdapter);
IDXGIFactory2* dxgiFactory;
adaptor_->GetParent(__uuidof(IDXGIFactory2), (void**)&dxgiFactory );
DXGI_SWAP_CHAIN_FULLSCREEN_DESC fullscreen_desc;
memset(&fullscreen_desc,0,sizeof(fullscreen_desc));
fullscreen_desc.Windowed = true;
dxgiFactory->CreateSwapChainForHwnd(device_,window_handle_, &swapChainDesc, &fullscreen_desc,nullptr, &swap_chain_);
dxgiDevice->SetMaximumFrameLatency(1);
SafeRelease(&dxgiFactory);
//SafeRelease(&dxgiAdapter);
SafeRelease(&dxgiDevice);
}
ID3D11Texture2D* backBuffer;
swap_chain_->GetBuffer(0,__uuidof(ID3D11Texture2D),(void**)&backBuffer);
device_->CreateRenderTargetView(backBuffer,nullptr,&render_target_view_);
SafeRelease(&backBuffer);
// Create a depth stencil view.
CD3D11_TEXTURE2D_DESC depthStencilTextureDesc(
DXGI_FORMAT_D24_UNORM_S8_UINT,
static_cast<UINT>(width_),
static_cast<UINT>(height_),
1,
0,
D3D11_BIND_DEPTH_STENCIL
);
ID3D11Texture2D* depth_stencil_tex;
device_->CreateTexture2D(&depthStencilTextureDesc,nullptr,&depth_stencil_tex);
CD3D11_DEPTH_STENCIL_VIEW_DESC depthStencilViewDesc(D3D11_DSV_DIMENSION_TEXTURE2D);
device_->CreateDepthStencilView(depth_stencil_tex,&depthStencilViewDesc,&depth_stencil_view_);
SafeRelease(&depth_stencil_tex);
SafeRelease(&default_depth_state);
D3D11_DEPTH_STENCIL_DESC depthStencilDesc;
// Initialize the description of the stencil state.
ZeroMemory(&depthStencilDesc, sizeof(depthStencilDesc));
depthStencilDesc.DepthEnable = true;
depthStencilDesc.DepthWriteMask = D3D11_DEPTH_WRITE_MASK_ALL;
depthStencilDesc.DepthFunc = D3D11_COMPARISON_LESS;
depthStencilDesc.StencilEnable = true;
depthStencilDesc.StencilReadMask = D3D11_DEFAULT_STENCIL_READ_MASK;
depthStencilDesc.StencilWriteMask = 0xFF;
// Stencil operations if pixel is front-facing.
depthStencilDesc.FrontFace.StencilFailOp = D3D11_STENCIL_OP_KEEP;
depthStencilDesc.FrontFace.StencilDepthFailOp = D3D11_STENCIL_OP_INCR;
depthStencilDesc.FrontFace.StencilPassOp = D3D11_STENCIL_OP_KEEP;
depthStencilDesc.FrontFace.StencilFunc = D3D11_COMPARISON_ALWAYS;
// Stencil operations if pixel is back-facing.
depthStencilDesc.BackFace.StencilFailOp = D3D11_STENCIL_OP_KEEP;
depthStencilDesc.BackFace.StencilDepthFailOp = D3D11_STENCIL_OP_DECR;
depthStencilDesc.BackFace.StencilPassOp = D3D11_STENCIL_OP_KEEP;
depthStencilDesc.BackFace.StencilFunc = D3D11_COMPARISON_ALWAYS;
device_->CreateDepthStencilState(&depthStencilDesc, &default_depth_state);
SetDepthState(null,0);
// Set the rendering viewport to target the entire window.
CD3D11_VIEWPORT viewport(0.0f,0.0f,width_,height_);
device_context_->RSSetViewports(1, &viewport);
device_context_->OMSetRenderTargets( 1, &render_target_view_, depth_stencil_view_ );
return S_OK;
}