C++ (Cpp) required_memory_bank::set_entry 예제들

예제 #1

파일: gimix.cpp 프로젝트: Fulg/mame

void gimix_state::machine_start()
{
	UINT8* ROM = m_rom->base();
	m_rombank1->configure_entries(0,4,ROM,0x800);
	m_rombank2->configure_entries(0,4,ROM,0x800);
	m_fixedrombank->configure_entries(0,4,ROM+0x700,0x800);
	m_rombank1->set_entry(0);  // RAM banks are undefined on startup
	m_rombank2->set_entry(1);
	m_fixedrombank->set_entry(0);
	// install any extra RAM
	if(m_ram->size() > 65536)
	{
		m_bank1->space(AS_PROGRAM).install_readwrite_bank(0x10000,m_ram->size()-1,"upper_ram");
		m_bank2->space(AS_PROGRAM).install_readwrite_bank(0x10000,m_ram->size()-1,"upper_ram");
		m_bank3->space(AS_PROGRAM).install_readwrite_bank(0x10000,m_ram->size()-1,"upper_ram");
		m_bank4->space(AS_PROGRAM).install_readwrite_bank(0x10000,m_ram->size()-1,"upper_ram");
		m_bank5->space(AS_PROGRAM).install_readwrite_bank(0x10000,m_ram->size()-1,"upper_ram");
		m_bank6->space(AS_PROGRAM).install_readwrite_bank(0x10000,m_ram->size()-1,"upper_ram");
		m_bank7->space(AS_PROGRAM).install_readwrite_bank(0x10000,m_ram->size()-1,"upper_ram");
		m_bank8->space(AS_PROGRAM).install_readwrite_bank(0x10000,m_ram->size()-1,"upper_ram");
		m_bank9->space(AS_PROGRAM).install_readwrite_bank(0x10000,m_ram->size()-1,"upper_ram");
		m_bank10->space(AS_PROGRAM).install_readwrite_bank(0x10000,m_ram->size()-1,"upper_ram");
		m_bank11->space(AS_PROGRAM).install_readwrite_bank(0x10000,m_ram->size()-1,"upper_ram");
		m_bank12->space(AS_PROGRAM).install_readwrite_bank(0x10000,m_ram->size()-1,"upper_ram");
		m_bank13->space(AS_PROGRAM).install_readwrite_bank(0x10000,m_ram->size()-1,"upper_ram");
		m_bank14->space(AS_PROGRAM).install_readwrite_bank(0x10000,m_ram->size()-1,"upper_ram");
		m_bank15->space(AS_PROGRAM).install_readwrite_bank(0x10000,m_ram->size()-1,"upper_ram");
		m_bank16->space(AS_PROGRAM).install_readwrite_bank(0x10000,m_ram->size()-1,"upper_ram");
	}
	m_floppy0->get_device()->set_rpm(300);
	m_floppy1->get_device()->set_rpm(300);
}

예제 #2

파일: tutor.cpp 프로젝트: MASHinfo/mame

void tutor_state::machine_start()
{
	std::string region_tag;
	m_cart_rom = memregion(region_tag.assign(m_cart->tag()).append(GENERIC_ROM_REGION_TAG).c_str());

	m_tape_interrupt_timer = machine().scheduler().timer_alloc(timer_expired_delegate(FUNC(tutor_state::tape_interrupt_handler),this));

	m_bank1->configure_entry(0, memregion("maincpu")->base() + 0x4000);
	m_bank1->set_entry(0);
	m_bank2->configure_entry(0, memregion("maincpu")->base() + 0x8000);
	m_bank2->set_entry(0);

	if (m_cart_rom)
	{
		if (m_cart_rom->bytes() > 0x4000)
		{
			m_bank1_switching = 1;
			m_bank1->configure_entry(1, m_cart_rom->base());
			m_bank1->set_entry(1);
			m_bank2->configure_entry(1, m_cart_rom->base() + 0x4000);
			m_bank2->set_entry(1);
		}
		else
		{
			m_bank2->configure_entry(1, m_cart_rom->base());
			m_bank2->set_entry(1);
		}
	}
}

예제 #3

파일: prestige.c 프로젝트: dinkc64/mame

void prestige_state::machine_start()
{
	std::string region_tag;
	m_cart_rom = memregion(region_tag.assign(m_cart->tag()).append(GENERIC_ROM_REGION_TAG).c_str());

	UINT8 *rom = memregion("maincpu")->base();
	UINT8 *cart = m_cart_rom->base();
	UINT8 *ram = m_ram->pointer();
	memset(ram, 0x00, m_ram->size());

	m_bank1->configure_entries(0, 64, rom,  0x4000);
	m_bank1->configure_entries(64,32, cart, 0x4000);
	m_bank2->configure_entries(0, 64, rom,  0x4000);
	m_bank2->configure_entries(64,32, cart, 0x4000);
	m_bank3->configure_entries(0, 64, rom,  0x4000);
	m_bank3->configure_entries(64,32, cart, 0x4000);
	m_bank4->configure_entries(0, 4,  ram,  0x2000);
	m_bank5->configure_entries(0, 4,  ram,  0x2000);

	m_bank1->set_entry(0);
	m_bank2->set_entry(0);
	m_bank3->set_entry(0);
	m_bank4->set_entry(0);
	m_bank5->set_entry(0);

	//pointer to the videoram
	m_vram = ram;
}

예제 #4

파일: bigbord2.cpp 프로젝트: MASHinfo/mame

void bigbord2_state::machine_reset()
{
	u8 i;
	for (i = 0; i < 8; i++)
		m_cc[i] = 1;
	m_cc[2] = 0;
	m_bankr->set_entry(0);
	m_bankv->set_entry(0);
	m_banka->set_entry(0);
}

예제 #5

파일: pc2000.cpp 프로젝트: motoschifo/mame

void pc2000_state::machine_reset()
{
    //set the initial bank
    m_bank0->set_entry(0);
    m_bank1->set_entry(0);
    m_bank2->set_entry(0);
}

예제 #6

파일: pitagjr.cpp 프로젝트: Robbbert/store1

INPUT_PORTS_END

void pitagjr_state::machine_start()
{
	m_rombank->configure_entries(0, 0x20, memregion("maincpu")->base(), 0x2000);
	m_rombank->set_entry(1);
}

예제 #7

파일: sigmab52.cpp 프로젝트: RJRetro/mame

void sigmab52_state::machine_reset()
{
	m_bank1->set_entry(1);
	m_coin_start_cycles = 0;
	m_hopper_start_cycles = 0;
	m_audiocpu_cmd_irq = CLEAR_LINE;
}

예제 #8

파일: cultures.cpp 프로젝트: ursine/mame

void cultures_state::machine_reset()
{
	m_okibank->set_entry(0);
	m_vrambank->set_bank(1);
	m_irq_enable = 0;
	m_bg1_bank = 0;
	m_bg2_bank = 0;
}

예제 #9

파일: skimaxx.cpp 프로젝트: rfka01/mame

void skimaxx_state::device_post_load()
{
	// double buffering
	u8 const bank_bg_buffer = (*m_fpga_ctrl & 0x40) ? 1 : 0;

	m_bg_buffer_back  = m_bg_buffer.get() + 0x400 * 0x100 * sizeof(u16) / sizeof(u32) * bank_bg_buffer;
	m_bg_buffer_front = m_bg_buffer.get() + 0x400 * 0x100 * sizeof(u16) / sizeof(u32) * (1 - bank_bg_buffer);

	m_bgrambank->set_entry(bank_bg_buffer);
}

예제 #10

파일: cultures.cpp 프로젝트: ursine/mame

void cultures_state::machine_start()
{
	m_prgbank->configure_entries(0, 16, memregion("maincpu")->base(), 0x4000);
	m_okibank->configure_entries(0, 0x200000 / 0x20000, memregion("oki")->base(), 0x20000);
	m_okibank->set_entry(0);

	save_item(NAME(m_irq_enable));
	save_item(NAME(m_bg1_bank));
	save_item(NAME(m_bg2_bank));
}

예제 #11

파일: stratos.cpp 프로젝트: SailorSat/cabmame

void stratos_state::machine_reset()
{
	control = 0x00;
	led_latch_control = 0x00;
	individual_leds = 0x00000;
	latch_AH_red = 0;
	latch_AH_green = 0;
	latch_18_red = 0;
	latch_18_green = 0;
	bank_8000 ->set_entry(0);
	bank_4000 ->set_entry(0);
	nvram_bank->set_entry(0);
}

예제 #12

파일: gimix.cpp 프로젝트: Fulg/mame

void gimix_state::machine_reset()
{
	m_term_data = 0;
	m_rombank1->set_entry(0);  // RAM banks are undefined on startup
	m_rombank2->set_entry(1);
	m_fixedrombank->set_entry(0);
	m_dma_status = 0x00;
	m_dma_ctrl = 0x00;
	m_task = 0x00;
	m_selected_drive = 0;
	m_floppy0_ready = false;
	m_floppy1_ready = false;
	membank("lower_ram")->set_base(m_ram->pointer());
	if(m_ram->size() > 65536)
		membank("upper_ram")->set_base(m_ram->pointer()+0x10000);

	// initialise FDC clock based on DIP Switch S2-9 (5.25"/8" drive select)
	if(m_dma_dip->read() & 0x00000100)
		m_fdc->set_unscaled_clock(XTAL_8MHz / 4); // 8 inch (2MHz)
	else
		m_fdc->set_unscaled_clock(XTAL_8MHz / 8); // 5.25 inch (1MHz)
}

예제 #13

파일: mephistp.cpp 프로젝트: k2-git/mame

INPUT_PORTS_END

void mephisto_pinball_state::machine_start()
{
	m_soundbank->configure_entries(0, 16, memregion("sound1")->base(), 0x8000);
	m_soundbank->set_entry(0);

	m_ay8910_data = 0;
	m_ay8910_bdir = 1;
	m_ay8910_bc1 = 1;
	save_item(NAME(m_ay8910_data));
	save_item(NAME(m_ay8910_bdir));
	save_item(NAME(m_ay8910_bc1));
}

예제 #14

파일: prestige.cpp 프로젝트: qwijibo/mame

void prestige_state::machine_start()
{
	std::string region_tag;
	m_cart_rom = memregion(region_tag.assign(m_cart->tag()).append(GENERIC_ROM_REGION_TAG).c_str());

	uint8_t *rom = memregion("maincpu")->base();
	uint8_t *cart = nullptr;
	if (m_cart_rom != nullptr)
	{
		cart = m_cart_rom->base();
	}
	else
	{
		cart = rom + 0x40000;   // internal ROM also includes extra contents that are activated by a cartridge that works as a jumper
	}
	uint8_t *ram = m_ram->pointer();
	memset(ram, 0x00, m_ram->size());

	m_bank1->configure_entries(0, 64, rom,  0x4000);
	m_bank1->configure_entries(64,32, cart, 0x4000);
	m_bank2->configure_entries(0, 64, rom,  0x4000);
	m_bank2->configure_entries(64,32, cart, 0x4000);
	m_bank3->configure_entries(0, 64, rom,  0x4000);
	m_bank3->configure_entries(64,32, cart, 0x4000);
	m_bank4->configure_entries(0, 4,  ram,  0x2000);
	m_bank5->configure_entries(0, 4,  ram,  0x2000);

	m_bank1->set_entry(0);
	m_bank2->set_entry(0);
	m_bank3->set_entry(0);
	m_bank4->set_entry(0);
	m_bank5->set_entry(0);

	//pointer to the videoram
	m_vram = ram;
}

예제 #15

파일: iq151.cpp 프로젝트: SailorSat/cabmame

void iq151_state::machine_reset()
{
	m_boot_bank->set_entry(0);

	m_vblank_irq_state = 0;
}

예제 #16

void sigmab52_state::machine_reset()
{
	m_bank1->set_entry(1);
	m_coin_start_cycles = 0;
	m_hopper_start_cycles = 0;
}

예제 #17

파일: cms.cpp 프로젝트: SailorSat/cabmame

void cms_state::machine_reset()
{
	m_bank1->set_entry(0);
}

예제 #18

파일: acvirus.cpp 프로젝트: fesh0r/mame-full

void acvirus_state::machine_start()
{
	m_rombank->configure_entries(0, 15, memregion("maincpu")->base(), 0x8000);
	m_rombank->set_entry(3);
}

예제 #19

파일: candela.cpp 프로젝트: fesh0r/mame-full

void can09_state::machine_reset()
{
	LOG("%s()\n", FUNCNAME);
	m_bank1->set_entry(0);
}

예제 #20

파일: taitowlf.c 프로젝트: Archlogic/libretro-mame

void taitowlf_state::machine_reset()
{
	// disable RAM access (reads go to BIOS ROM)
	m_bank1->set_entry(0);
}

예제 #21

파일: magtouch.cpp 프로젝트: MASHinfo/mame

void magtouch_state::machine_start()
{
	m_rombank->configure_entries(0, 0x80, memregion("game_prg")->base(), 0x8000 );
	m_rombank->set_entry(0);
	subdevice<nvram_device>("nvram")->set_base(memshare("nvram")->ptr(), 0x2000);
}