예제 #1
0
OptIndex::OptIndex(const CheMPS2::Hamiltonian &ham)
{
    SymmInfo.setGroup(ham.getNGroup());
    this->L = ham.L;
    this->Nirreps = ham.SymmInfo.getNumberOfIrreps();

    NORB.resize(Nirreps);
    NORBcumulative.resize(Nirreps+1);

    int sum_check = 0;
    NORBcumulative[0] = 0;
    for (int irrep=0; irrep<Nirreps; irrep++)
    {
        NORB[irrep] = ham.irrep2num_orb[irrep];

        sum_check += NORB[irrep];

        NORBcumulative[irrep+1] = NORBcumulative[irrep] + NORB[irrep];
    }

    if (sum_check != L)
        std::cerr << "OptIndex::OptIndex : Sum over all orbitals is not L." << std::endl;

    irrep_each_orbital.resize(NORBcumulative[Nirreps]);

    for (int irrep=0; irrep<Nirreps; irrep++)
        for (int cnt=0; cnt<NORB[irrep]; cnt++)
            irrep_each_orbital[ NORBcumulative[irrep] + cnt ] = irrep;
}
예제 #2
0
파일: test4.cpp 프로젝트: ankit76/CheMPS2
int main(void){

   #ifdef CHEMPS2_MPI_COMPILATION
   CheMPS2::MPIchemps2::mpi_init();
   #endif

   CheMPS2::Initialize::Init();
   
   //The Hamiltonian: 1D Hubbard model
   const int L = 10;
   const int Group = 0;
   const double U = 2.0;
   const double T = -1.0;
   int * irreps = new int[L];
   for (int cnt=0; cnt<L; cnt++){ irreps[cnt] = 0; }
   //The Hamiltonian initializes all its matrix elements to 0.0
   CheMPS2::Hamiltonian * Ham = new CheMPS2::Hamiltonian(L, Group, irreps);
   delete [] irreps;
   for (int cnt=0; cnt<L; cnt++){ Ham->setVmat(cnt,cnt,cnt,cnt,U); }
   for (int cnt=0; cnt<L-1; cnt++){ Ham->setTmat(cnt,cnt+1,T); }
   
   //The targeted state
   const int TwoS = 5;
   const int N = 9;
   const int Irrep = 0;
   CheMPS2::Problem * Prob = new CheMPS2::Problem(Ham, TwoS, N, Irrep);
   
   //The convergence scheme
   CheMPS2::ConvergenceScheme * OptScheme = new CheMPS2::ConvergenceScheme(2);
   //OptScheme->setInstruction(instruction, DSU(2), Econvergence, maxSweeps, noisePrefactor);
   OptScheme->setInstruction(0,   30, 1e-10,  3, 0.1);
   OptScheme->setInstruction(1, 1000, 1e-10, 10, 0.0);
   
   //Run ground state calculation
   CheMPS2::DMRG * theDMRG = new CheMPS2::DMRG(Prob, OptScheme);
   const double EnergyDMRG = theDMRG->Solve();
   theDMRG->calc2DMandCorrelations();
   #ifdef CHEMPS2_MPI_COMPILATION
   if ( CheMPS2::MPIchemps2::mpi_rank() == MPI_CHEMPS2_MASTER )
   #endif
   {
      theDMRG->getCorrelations()->Print();
   }
   
   //Clean up DMRG
   if (CheMPS2::DMRG_storeMpsOnDisk){ theDMRG->deleteStoredMPS(); }
   if (CheMPS2::DMRG_storeRenormOptrOnDisk){ theDMRG->deleteStoredOperators(); }
   delete theDMRG;
   delete OptScheme;
   delete Prob;
   
   //Calculate FCI reference energy
   double EnergyFCI = 0.0;
   #ifdef CHEMPS2_MPI_COMPILATION
   if ( CheMPS2::MPIchemps2::mpi_rank() == MPI_CHEMPS2_MASTER )
   #endif
   {
      const int Nel_up   = ( N + TwoS ) / 2;
      const int Nel_down = ( N - TwoS ) / 2;
      const double maxMemWorkMB = 10.0;
      const int FCIverbose = 1;
      CheMPS2::FCI * theFCI = new CheMPS2::FCI(Ham, Nel_up, Nel_down, Irrep, maxMemWorkMB, FCIverbose);
      EnergyFCI = theFCI->GSDavidson(NULL);
      delete theFCI;
   }
   #ifdef CHEMPS2_MPI_COMPILATION
   CheMPS2::MPIchemps2::broadcast_array_double( &EnergyFCI, 1, MPI_CHEMPS2_MASTER );
   #endif
   
   //Clean up the Hamiltonian
   delete Ham;
   
   //Check succes
   const bool success = ( fabs( EnergyDMRG - EnergyFCI ) < 1e-8 ) ? true : false;
   
   #ifdef CHEMPS2_MPI_COMPILATION
   CheMPS2::MPIchemps2::mpi_finalize();
   #endif
   
   cout << "================> Did test 4 succeed : ";
   if (success){
      cout << "yes" << endl;
      return 0; //Success
   }
   cout << "no" << endl;
   return 7; //Fail

}
예제 #3
0
파일: test10.cpp 프로젝트: ankit76/CheMPS2
int main(void){

   #ifdef CHEMPS2_MPI_COMPILATION
   CheMPS2::MPIchemps2::mpi_init();
   #endif

   CheMPS2::Initialize::Init();
   
   //Square 2D Hubbard model with PBC
   const int L_linear = 3;                    // Linear size
   const int L_square = L_linear * L_linear;  // Number of orbitals
   const int group = 0;                       // C1 symmetry
   const double U =  5.0;                     // On-site repulsion
   const double T = -1.0;                     // Hopping term
   
   const int N = 9;                           // Number of electrons
   const int TwoS = 1;                        // Two times the spin
   const int Irrep = 0;                       // Irrep = A (C1 symmetry)
   
   //Create the Hamiltonian (eightfold permutation symmetry is OK for site basis)
   int * irreps = new int[L_square];
   for (int cnt=0; cnt<L_square; cnt++){ irreps[cnt] = 0; }
   //The Hamiltonian initializes all its matrix elements to 0.0
   CheMPS2::Hamiltonian * Ham = new CheMPS2::Hamiltonian(L_square, group, irreps);
   delete [] irreps;
   
   //Fill with the site-basis matrix elements
   for (int cnt=0; cnt<L_square; cnt++){ Ham->setVmat(cnt,cnt,cnt,cnt,U); }
   for (int ix=0; ix<L_linear; ix++){
      for (int iy=0; iy<L_linear; iy++){
          const int idx1 = ix + L_linear * iy;                        // This site
          const int idx2 = (( ix + 1 ) % L_linear) + L_linear * iy;   // Right neighbour (PBC)
          const int idx3 = ix + L_linear * ((( iy + 1 ) % L_linear)); //Upper neighbour (PBC)
          Ham->setTmat(idx1,idx2,T);
          Ham->setTmat(idx1,idx3,T);
      }
   }
   
   //The problem object
   CheMPS2::Problem * Prob = new CheMPS2::Problem(Ham, TwoS, N, Irrep);
   
   //The convergence scheme
   CheMPS2::ConvergenceScheme * OptScheme = new CheMPS2::ConvergenceScheme(2);
   //OptScheme->setInstruction(instruction, DSU(2), Econvergence, maxSweeps, noisePrefactor);
   OptScheme->setInstruction(0,  500, 1e-10,  3, 0.05);
   OptScheme->setInstruction(1, 1000, 1e-10, 10, 0.0 );
   
   //Run ground state calculation
   CheMPS2::DMRG * theDMRG = new CheMPS2::DMRG(Prob, OptScheme);
   const double EnergySite = theDMRG->Solve();
   theDMRG->calc2DMandCorrelations();
   
   //Clean up DMRG
   if (CheMPS2::DMRG_storeMpsOnDisk){ theDMRG->deleteStoredMPS(); }
   if (CheMPS2::DMRG_storeRenormOptrOnDisk){ theDMRG->deleteStoredOperators(); }
   delete theDMRG;
   
   //Hack: overwrite the matrix elements in momentum space (4-fold symmetry!!!) directly in the Problem object
   theDMRG = new CheMPS2::DMRG(Prob, OptScheme); // Prob->construct_mxelem() is called now
   for (int orb1=0; orb1<L_square; orb1++){
      const int k1x = orb1 % L_linear;
      const int k1y = orb1 / L_linear;
      const double Telem1 = 2*T*( cos((2*M_PI*k1x)/L_linear)
                                + cos((2*M_PI*k1y)/L_linear) );
      for (int orb2=0; orb2<L_square; orb2++){
         const int k2x = orb2 % L_linear;
         const int k2y = orb2 / L_linear;
         const double Telem2 = 2*T*( cos((2*M_PI*k2x)/L_linear)
                                   + cos((2*M_PI*k2y)/L_linear) );
         for (int orb3=0; orb3<L_square; orb3++){
            const int k3x = orb3 % L_linear;
            const int k3y = orb3 / L_linear;
            for (int orb4=0; orb4<L_square; orb4++){
               const int k4x = orb4 % L_linear;
               const int k4y = orb4 / L_linear;
               const bool kx_conservation = (((k1x+k2x) % L_linear) == ((k3x+k4x) % L_linear))?true:false;
               const bool ky_conservation = (((k1y+k2y) % L_linear) == ((k3y+k4y) % L_linear))?true:false;
               double temp = 0.0;
               if ( kx_conservation && ky_conservation ){ temp += U/L_square; }
               if (( orb1 == orb3 ) && ( orb2 == orb4 )){ temp += (Telem1+Telem2)/(N-1); }
               Prob->setMxElement(orb1,orb2,orb3,orb4,temp);
            }
         }
      }
   }
   theDMRG->PreSolve(); // New matrix elements require reconstruction of complementary renormalized operators
   const double EnergyMomentum = theDMRG->Solve();
   theDMRG->calc2DMandCorrelations();
   
   //Clean up
   if (CheMPS2::DMRG_storeMpsOnDisk){ theDMRG->deleteStoredMPS(); }
   if (CheMPS2::DMRG_storeRenormOptrOnDisk){ theDMRG->deleteStoredOperators(); }
   delete theDMRG;
   delete OptScheme;
   delete Prob;
   delete Ham;
   
   //Check succes
   const bool success = ( fabs( EnergySite - EnergyMomentum ) < 1e-8 ) ? true : false;
   
   #ifdef CHEMPS2_MPI_COMPILATION
   CheMPS2::MPIchemps2::mpi_finalize();
   #endif
   
   cout << "================> Did test 10 succeed : ";
   if (success){
      cout << "yes" << endl;
      return 0; //Success
   }
   cout << "no" << endl;
   return 7; //Fail

}
예제 #4
0
파일: test7.cpp 프로젝트: ankit76/CheMPS2
int main(void){

   double RMS  = 1.0;
   double RMS2 = 1.0;

   #ifdef CHEMPS2_MPI_COMPILATION
   CheMPS2::MPIchemps2::mpi_init();
   if ( CheMPS2::MPIchemps2::mpi_rank() == MPI_CHEMPS2_MASTER )
   #endif
   {
   
      CheMPS2::Initialize::Init();
      
      //The path to the matrix elements
      string matrixelements = "/home/ankit/cheMPS_tzgnd/tests/matrixelements/O2.CCPVDZ.FCIDUMP";
      
      //The Hamiltonian
      const int psi4groupnumber = 7; // d2h -- see Irreps.h and O2.ccpvdz.out
      CheMPS2::Hamiltonian * Ham = new CheMPS2::Hamiltonian( matrixelements, psi4groupnumber );
      Ham->save();
      const int L = Ham->getL();
      const int GroupNumber = Ham->getNGroup();
      int * OrbitalIrreps = new int[ L ];
      for (int orb = 0; orb < L; orb++){ OrbitalIrreps[orb] = Ham->getOrbitalIrrep(orb); }
      
      //Use the other initializer
      CheMPS2::Hamiltonian * HamLoaded = new CheMPS2::Hamiltonian(L, GroupNumber, OrbitalIrreps);
      delete [] OrbitalIrreps;
      HamLoaded->read();
      
      //Test whether it's the same thing
      RMS = 0.0;
      double RMSabs = 0.0;
      double temp = 0.0;
      temp = Ham->getEconst();
      RMSabs += temp * temp;
      temp = Ham->getEconst() - HamLoaded->getEconst();
      RMS += temp * temp;
      for (int i1=0; i1<L; i1++){
         for (int i2=0; i2<L; i2++){
            temp = Ham->getTmat(i1,i2);
            RMSabs += temp * temp;
            temp = Ham->getTmat(i1,i2) - HamLoaded->getTmat(i1,i2);
            RMS += temp * temp;
            for (int i3=0; i3<L; i3++){
               for (int i4=0; i4<L; i4++){
                  temp = Ham->getVmat(i1,i2,i3,i4);
                  RMSabs += temp * temp;
                  temp = Ham->getVmat(i1,i2,i3,i4) - HamLoaded->getVmat(i1,i2,i3,i4);
                  RMS += temp * temp;
               }
            }
         }
      }
      RMS = sqrt(RMS);
      RMSabs = sqrt(RMSabs);
      cout << "The 2-norm of all Hamiltonian matrix elements is " << RMSabs << endl;
      cout << "The RMS difference between Ham and HamLoaded is " << RMS << endl;
      delete HamLoaded;
      
      //To load an HDF5 dump and immediately fill the Hamiltonian
      const bool fileh5 = true;
      CheMPS2::Hamiltonian * HamLoaded2 = new CheMPS2::Hamiltonian( fileh5 );
      
      //Test whether it's the same thing
      RMS2 = 0.0;
      temp = Ham->getEconst() - HamLoaded2->getEconst();
      RMS2 += temp * temp;
      for (int i1=0; i1<L; i1++){
         for (int i2=0; i2<L; i2++){
            temp = Ham->getTmat(i1,i2) - HamLoaded2->getTmat(i1,i2);
            RMS2 += temp * temp;
            for (int i3=0; i3<L; i3++){
               for (int i4=0; i4<L; i4++){
                  temp = Ham->getVmat(i1,i2,i3,i4) - HamLoaded2->getVmat(i1,i2,i3,i4);
                  RMS2 += temp * temp;
               }
            }
         }
      }
      RMS2 = sqrt(RMS2);
      cout << "The RMS difference between Ham and HamLoaded2 is " << RMS2 << endl;
      
      //Clean up
      delete Ham;
      delete HamLoaded2;
      stringstream temp1;
      temp1 << "rm " << CheMPS2::HAMILTONIAN_TmatStorageName;
      int info = system(temp1.str().c_str());
      stringstream temp2;
      temp2 << "rm " << CheMPS2::HAMILTONIAN_VmatStorageName;
      info = system(temp2.str().c_str());
      stringstream temp3;
      temp3 << "rm " << CheMPS2::HAMILTONIAN_ParentStorageName;
      info = system(temp3.str().c_str());
   
   }
   #ifdef CHEMPS2_MPI_COMPILATION
   CheMPS2::MPIchemps2::broadcast_array_double( &RMS,  1, MPI_CHEMPS2_MASTER );
   CheMPS2::MPIchemps2::broadcast_array_double( &RMS2, 1, MPI_CHEMPS2_MASTER );
   #endif
   
   //Check succes
   const bool success = (( RMS < 1e-10 ) && ( RMS2 < 1e-10 )) ? true : false;
   
   #ifdef CHEMPS2_MPI_COMPILATION
   CheMPS2::MPIchemps2::mpi_finalize();
   #endif
   
   cout << "================> Did test 7 succeed : ";
   if (success){
      cout << "yes" << endl;
      return 0; //Success
   }
   cout << "no" << endl;
   return 7; //Fail

}