// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void DataContainerReader::dataCheck()
{
// Sync the file proxy and cached proxy if the time stamps are different
QFileInfo fi(getInputFile());
if (getInputFile() == getLastFileRead() && getLastRead() < fi.lastModified())
{
syncProxies();
}
QString ss;
if (getInputFile().isEmpty() == true)
{
ss = QObject::tr("The input file must be set");
setErrorCondition(-387);
notifyErrorMessage(getHumanLabel(), ss, getErrorCondition());
}
else if (fi.exists() == false)
{
ss = QObject::tr("The input file does not exist");
setErrorCondition(-388);
notifyErrorMessage(getHumanLabel(), ss, getErrorCondition());
}
if(getErrorCondition())
{
// something has gone wrong and errors were logged alread so just return
return;
}
DataContainerArray::Pointer dca = getDataContainerArray();
// Create a new DataContainerArray to read the file data into
DataContainerArray::Pointer tempDCA = DataContainerArray::New();
// Read either the structure or all the data depending on the preflight status
readData(getInPreflight(), m_InputFileDataContainerArrayProxy, tempDCA);
QList<DataContainer::Pointer>& tempContainers = tempDCA->getDataContainers();
QListIterator<DataContainer::Pointer> iter(tempContainers);
while (iter.hasNext())
{
DataContainer::Pointer container = iter.next();
if (getOverwriteExistingDataContainers() == true )
{
if (dca->doesDataContainerExist(container->getName()) == true)
{
dca->removeDataContainer(container->getName());
}
dca->addDataContainer(container);
}
else
{
if (dca->doesDataContainerExist(container->getName()) == true)
{
ss = QObject::tr("The input file has a DataContainer with a name (%1) that already exists in the current DataContainerArray structure").arg(container->getName());
setErrorCondition(-390);
notifyErrorMessage(getHumanLabel(), ss, getErrorCondition());
}
else
{
dca->addDataContainer(container);
}
}
}
QMap<QString, IDataContainerBundle::Pointer> bundles = tempDCA->getDataContainerBundles();
dca->setDataContainerBundles(bundles);
}
// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void PhaseTypeSelectionWidget::populateComboBoxes()
{
// std::cout << "void PhaseTypeSelectionWidget::populateComboBoxesWithSelection()" << std::endl;
// Now get the DataContainerArray from the Filter instance
// We are going to use this to get all the current DataContainers
DataContainerArray::Pointer dca = getFilter()->getDataContainerArray();
if(NULL == dca.get()) { return; }
// Grab what is currently selected
QString curDcName = dataContainerCombo->currentText();
QString curAmName = attributeMatrixCombo->currentText();
// Check to see if we have any DataContainers to actually populate drop downs with.
if(dca->getDataContainers().size() == 0)
{
dataContainerCombo->clear();
attributeMatrixCombo->clear();
return;
}
// Cache the DataContainerArray Structure for our use during all the selections
m_DcaProxy = DataContainerArrayProxy(dca.get());
// Populate the DataContainerArray Combo Box with all the DataContainers
QList<DataContainerProxy> dcList = m_DcaProxy.dataContainers.values();
QListIterator<DataContainerProxy> iter(dcList);
dataContainerCombo->clear();
while(iter.hasNext() )
{
DataContainerProxy dc = iter.next();
dataContainerCombo->addItem(dc.name);
}
// Get what is in the filter
PhaseTypeSelectionFilterParameter* p = dynamic_cast<PhaseTypeSelectionFilterParameter*>(getFilterParameter());
QVariant qvSelectedPath = getFilter()->property(p->getAttributeMatrixPathProperty().toLatin1().constData());
DataArrayPath selectedPath = qvSelectedPath.value<DataArrayPath>();
QString filtDcName = selectedPath.getDataContainerName();
QString filtAmName = selectedPath.getAttributeMatrixName();
QString dcName;
QString amName;
// If EVERYTHING is empty, then try the default value
if(filtDcName.isEmpty() && filtAmName.isEmpty()
&& curDcName.isEmpty() && curAmName.isEmpty() )
{
DataArrayPath daPath = getFilterParameter()->getDefaultValue().value<DataArrayPath>();
dcName = daPath.getDataContainerName();
amName = daPath.getAttributeMatrixName();
}
else
{
// Now to figure out which one of these to use. If this is the first time through then what we picked up from the
// gui will be empty strings because nothing is there. If there is something in the filter then we should use that.
// If there is something in both of them and they are NOT equal then we have a problem. Use the flag m_DidCausePreflight
// to determine if the change from the GUI should over ride the filter or vice versa. there is a potential that in future
// versions that something else is driving DREAM3D and pushing the changes to the filter and we need to reflect those
// changes in the GUI, like a testing script?
dcName = checkStringValues(curDcName, filtDcName);
if( !dca->doesDataContainerExist(dcName) ) { dcName = ""; }
amName = checkStringValues(curAmName, filtAmName);
if( !dca->doesAttributeMatrixExist(DataArrayPath(dcName, amName, "") ) ) { amName = ""; }
}
bool didBlock = false;
if (!dataContainerCombo->signalsBlocked()) { didBlock = true; }
dataContainerCombo->blockSignals(true);
int dcIndex = dataContainerCombo->findText(dcName);
dataContainerCombo->setCurrentIndex(dcIndex);
populateAttributeMatrixList();
if(didBlock) { dataContainerCombo->blockSignals(false); didBlock = false; }
if(!attributeMatrixCombo->signalsBlocked()) { didBlock = true; }
attributeMatrixCombo->blockSignals(true);
if (dcIndex < 0)
{
attributeMatrixCombo->setCurrentIndex(-1);
}
else
{
int amIndex = attributeMatrixCombo->findText(amName);
attributeMatrixCombo->setCurrentIndex(amIndex);
}
if(didBlock) { attributeMatrixCombo->blockSignals(false); didBlock = false; }
}
// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void DataArraySelectionWidget::populateComboBoxes()
{
//qDebug() << "-----------------------------------------------";
//qDebug() << getFilter()->getHumanLabel() << " " << getFilterParameter()->getHumanLabel() << " DataArraySelectionWidget::populateComboBoxes()";
// Now get the DataContainerArray from the Filter instance
// We are going to use this to get all the current DataContainers
DataContainerArray::Pointer dca = getFilter()->getDataContainerArray();
if(NULL == dca.get()) { return; }
//qDebug() << getFilter()->getHumanLabel() << " " << getFilterParameter()->getHumanLabel();
// Grab what is currently selected
QString curDcName = dataContainerCombo->currentText();
QString curAmName = attributeMatrixCombo->currentText();
QString curDaName = attributeArrayCombo->currentText();
//qDebug() << "Current ComboBox Value: " << curDcName << "::" << curAmName << "::" << curDaName;
// Check to see if we have any DataContainers to actually populate drop downs with.
if(dca->getDataContainers().size() == 0)
{
dataContainerCombo->clear();
attributeMatrixCombo->clear();
attributeArrayCombo->clear();
return;
}
// Cache the DataContainerArray Structure for our use during all the selections
m_DcaProxy = DataContainerArrayProxy(dca.get());
// Populate the DataContainerArray Combo Box with all the DataContainers
QList<DataContainerProxy> dcList = m_DcaProxy.dataContainers.values();
QListIterator<DataContainerProxy> iter(dcList);
dataContainerCombo->clear();
while(iter.hasNext() )
{
DataContainerProxy dc = iter.next();
dataContainerCombo->addItem(dc.name);
// if(dataContainerCombo->findText(dc.name) == -1 )
// {
// int index = dataContainerCombo->currentIndex();
// dataContainerCombo->addItem(dc.name);
// dataContainerCombo->setCurrentIndex(index);
// }
}
// Get what is in the filter
DataArrayPath selectedPath = getFilter()->property(PROPERTY_NAME_AS_CHAR).value<DataArrayPath>();
// Split the path up to make sure we have a valid path separated by the "|" character
QString filtDcName = selectedPath.getDataContainerName();
QString filtAmName = selectedPath.getAttributeMatrixName();
QString filtDaName = selectedPath.getDataArrayName();
QString dcName;
QString amName;
QString daName;
// If EVERYTHING is empty, then try the default value
if(filtDcName.isEmpty() && filtAmName.isEmpty() && filtDaName.isEmpty()
&& curDcName.isEmpty() && curAmName.isEmpty() && curDaName.isEmpty() )
{
DataArrayPath daPath = getFilterParameter()->getDefaultValue().value<DataArrayPath>();
dcName = daPath.getDataContainerName();
amName = daPath.getAttributeMatrixName();
daName = daPath.getDataArrayName();
}
else
{
// Now to figure out which one of these to use. If this is the first time through then what we picked up from the
// gui will be empty strings because nothing is there. If there is something in the filter then we should use that.
// If there is something in both of them and they are NOT equal then we have a problem. Use the flag m_DidCausePreflight
// to determine if the change from the GUI should over ride the filter or vice versa. there is a potential that in future
// versions that something else is driving DREAM3D and pushing the changes to the filter and we need to reflect those
// changes in the GUI, like a testing script?
dcName = checkStringValues(curDcName, filtDcName);
if( !dca->doesDataContainerExist(dcName) ) { dcName = ""; }
amName = checkStringValues(curAmName, filtAmName);
if ( !dca->doesAttributeMatrixExist(DataArrayPath(dcName, amName, "") ) ) { amName = ""; }
daName = checkStringValues(curDaName, filtDaName);
if ( !dca->doesAttributeArrayExist(DataArrayPath(dcName, amName, daName) )) { daName = ""; }
}
bool didBlock = false;
if (!dataContainerCombo->signalsBlocked()) { didBlock = true; }
dataContainerCombo->blockSignals(true);
int dcIndex = dataContainerCombo->findText(dcName);
dataContainerCombo->setCurrentIndex(dcIndex);
populateAttributeMatrixList();
if(didBlock) { dataContainerCombo->blockSignals(false); didBlock = false; }
if(!attributeMatrixCombo->signalsBlocked()) { didBlock = true; }
attributeMatrixCombo->blockSignals(true);
int amIndex = -1;
if (dcIndex < 0)
{
attributeMatrixCombo->setCurrentIndex(-1);
attributeArrayCombo->setCurrentIndex(-1);
}
else
{
amIndex = attributeMatrixCombo->findText(amName);
attributeMatrixCombo->setCurrentIndex(amIndex);
populateAttributeArrayList();
}
if(didBlock) { attributeMatrixCombo->blockSignals(false); didBlock = false; }
if(!attributeArrayCombo->signalsBlocked()) { didBlock = true; }
attributeArrayCombo->blockSignals(true);
if (amIndex < 0)
{
attributeArrayCombo->setCurrentIndex(-1);
}
else
{
int daIndex = attributeArrayCombo->findText(daName);
// The DataArray Name was empty, lets instantiate the filter and get the default value and try that
if (daIndex < 0)
{
QVariant var = getFilterParameter()->getDefaultValue();
DataArrayPath path = var.value<DataArrayPath>();
daName = path.getDataArrayName(); // Pick up the DataArray Name from a Default instantiation of the filter
daIndex = attributeArrayCombo->findText(daName);
}
attributeArrayCombo->setCurrentIndex(daIndex); // we set the selection but we are NOT triggering anything so we should
}
if(didBlock) { attributeArrayCombo->blockSignals(false); didBlock = false; }// not be triggering an infinte recursion of preflights
}
// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void AttributeMatrixCreationWidget::populateComboBoxes()
{
// std::cout << "void AttributeMatrixCreationWidget::populateComboBoxesWithSelection()" << std::endl;
// Now get the DataContainerArray from the Filter instance
// We are going to use this to get all the current DataContainers
DataContainerArray::Pointer dca = getFilter()->getDataContainerArray();
if (NULL == dca.get()) { return; }
// Check to see if we have any DataContainers to actually populate drop downs with.
if (dca->getDataContainers().size() == 0)
{
return;
}
// Cache the DataContainerArray Structure for our use during all the selections
m_DcaProxy = DataContainerArrayProxy(dca.get());
// Populate the DataContainer ComboBox
FilterPararameterWidgetUtils::PopulateDataContainerComboBox<AttributeMatrixCreationFilterParameter>(getFilter(), getFilterParameter(), dataContainerCombo, m_DcaProxy);
// Grab what is currently selected
QString curDcName = dataContainerCombo->currentText();
QString curAmName = attributeMatrixName->text();
// Get what is in the filter
DataArrayPath selectedPath = getFilter()->property(PROPERTY_NAME_AS_CHAR).value<DataArrayPath>();
// Split the path up to make sure we have a valid path separated by the "|" character
QString filtDcName = selectedPath.getDataContainerName();
QString filtAmName = selectedPath.getAttributeMatrixName();
// Now to figure out which one of these to use. If this is the first time through then what we picked up from the
// gui will be empty strings because nothing is there. If there is something in the filter then we should use that.
// If there is something in both of them and they are NOT equal then we have a problem. Use the flag m_DidCausePreflight
// to determine if the change from the GUI should over ride the filter or vice versa. there is a potential that in future
// versions that something else is driving SIMPLView and pushing the changes to the filter and we need to reflect those
// changes in the GUI, like a testing script?
QString dcName = checkStringValues(curDcName, filtDcName);
if (!dca->doesDataContainerExist(dcName)) { dcName = ""; }
bool didBlock = false;
if (!dataContainerCombo->signalsBlocked()) { didBlock = true; }
dataContainerCombo->blockSignals(true);
int dcIndex = dataContainerCombo->findText(dcName);
dataContainerCombo->setCurrentIndex(dcIndex);
if (didBlock) { dataContainerCombo->blockSignals(false); didBlock = false; }
if (!attributeMatrixName->signalsBlocked()) { didBlock = true; }
attributeMatrixName->blockSignals(true);
QString amName = checkStringValues(curAmName, filtAmName);
attributeMatrixName->setText(amName);
if (didBlock) { attributeMatrixName->blockSignals(false); didBlock = false; }
}
// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void DataContainerSelectionWidget::populateComboBoxes()
{
// std::cout << "void DataContainerSelectionWidget::populateComboBoxesWithSelection()" << std::endl;
// Now get the DataContainerArray from the Filter instance
// We are going to use this to get all the current DataContainers
DataContainerArray::Pointer dca = getFilter()->getDataContainerArray();
if(NULL == dca.get()) { return; }
// Check to see if we have any DataContainers to actually populate drop downs with.
if(dca->getDataContainers().size() == 0)
{
return;
}
// Cache the DataContainerArray Structure for our use during all the selections
m_DcaProxy = DataContainerArrayProxy(dca.get());
// Populate the DataContainerArray Combo Box with all the DataContainers
QList<DataContainerProxy> dcList = m_DcaProxy.dataContainers.values();
QListIterator<DataContainerProxy> iter(dcList);
dataContainerCombo->clear();
while(iter.hasNext() )
{
DataContainerProxy dc = iter.next();
dataContainerCombo->addItem(dc.name);
// if(dataContainerCombo->findText(dc.name) == -1 )
// {
// int index = dataContainerCombo->currentIndex();
// dataContainerCombo->addItem(dc.name);
// dataContainerCombo->setCurrentIndex(index);
// }
}
//remove items in the combo that are NOT in the Data Container Array
// int count = dataContainerCombo->count();
// for(int i = count - 1; i >= 0; i--)
// {
// QString str0 = dataContainerCombo->itemText(i);
// iter.toFront();
// bool boo = false;
// while(iter.hasNext() )
// {
// DataContainerProxy dc = iter.next();
// if(dc.name.compare(str0) == 0)
// {
// boo = true; // found in the list
// }
// }
// if(boo == false)
// {
// dataContainerCombo->removeItem(i);
// }
// }
// Grab what is currently selected
QString curDcName = dataContainerCombo->currentText();
// Get what is in the filter
QString filtDcName;
QString filtAmName;
QVariant qvSelectedPath = getFilter()->property(PROPERTY_NAME_AS_CHAR);
if( QString("QString").compare(qvSelectedPath.typeName()) == 0 )
{
filtDcName = qvSelectedPath.toString();
}
else if( QString("DataArrayPath").compare(qvSelectedPath.typeName()) == 0 )
{
DataArrayPath selectedPath = qvSelectedPath.value<DataArrayPath>();
filtDcName = selectedPath.getDataContainerName();
filtAmName = selectedPath.getAttributeMatrixName();
}
// Now to figure out which one of these to use. If this is the first time through then what we picked up from the
// gui will be empty strings because nothing is there. If there is something in the filter then we should use that.
// If there is something in both of them and they are NOT equal then we have a problem. Use the flag m_DidCausePreflight
// to determine if the change from the GUI should over ride the filter or vice versa. there is a potential that in future
// versions that something else is driving DREAM3D and pushing the changes to the filter and we need to reflect those
// changes in the GUI, like a testing script?
QString dcName = checkStringValues(curDcName, filtDcName);
if( !dca->doesDataContainerExist(dcName) ) { dcName = ""; }
bool didBlock = false;
if (!dataContainerCombo->signalsBlocked()) { didBlock = true; }
dataContainerCombo->blockSignals(true);
int dcIndex = dataContainerCombo->findText(dcName);
if(dcIndex < 0 && dcName.isEmpty() == false)
{
dataContainerCombo->addItem(dcName);
}
else
{
dataContainerCombo->setCurrentIndex(dcIndex);
}
if(didBlock) { dataContainerCombo->blockSignals(false); didBlock = false; }
}