yaos is for Internet of Things(IoT) devices, specifically for a single-core processor without MMU virtualization. It is designed for energy efficiency and hardware independent development.
Refer to /Documentation
directory for more information such as compiling, porting, APIs, etc.
Any feedback is welcome to kwon@toanyone.net. And let me know if any of you are interested in porting to new MCU so that I can give you a hand.
git clone git://github.com/onkwon/yaos
Get one from here if you don't have one installed yet. Or you can compile it from source code putting more effort, which is not recommended but still worth trying.
make clean
make stm32f1 (or stm32f4)
make
make burn
Tested on STM32F103 and STM32F407
make clean
make rpi (or rpi2)
make
That's it. Copy yaos.bin
file into SD card as name of kernel.img
, where bootcode.bin
and start.elf
files exist. Insert SD card in your RPI, turn it on, and enjoy!
You can get the GPU firmware and bootloaders here.
You will see shell prompt >
after some system log if uart rs232 cable connected.
Character LCD is also opened by default. You can change default pin assignment in /mach/rpi/include/pinmap.h
. Pinout:
-----
+3V3 ----|1 2|--\
|3 4|---- +5V0
|5 6|---- GND
DB7 ----|7 8|---- TXD0
|9 10|---- RXD0
DB6 ----|11 12|
DB5 ----|13 14|
DB4 ----|15 16|
|17 18|
E ----|19 20|
RW ----|21 22|
RS ----|23 24|
|25 26| ---- IR
-----
Two types of task are handled: normal and real time tasks. Simplified fair scheduler for normal tasks while FIFO scheduler for real time tasks. Each task is given a priority which can be dynamically changed with set_task_pri()
. For real time tasks a higher priority task always preempts lower priority tasks while the same priority tasks take place in turn under round-robin scheduling. Scheduler can be stopped to reduce even the scheduling overhead in case of a time critical task. On the other hand nomal tasks get chance to run by simplified fair scheduler, that picks the minimum value of vruntime up for the next task to run.
Tasks are always in one of five states: running, stopped, waiting, sleeping, or zombie. And a task can be created both statically and dynamically at run-time.
System resource is accessed by the system call interface entering privileged mode as a user task runs in user(unpriviliged) mode.
The concept of virtual file system(VFS) is implemented. The embedded flash rom in SoC can be mounted as the root file system(embedfs) while a ramfs is mounted as a devfs for a device node.
Page is unit of memory management but alternative memory manager can be used in such a system of memory shortage.
Buddy allocator and first-fit allocator are implemented.
Softirqs will preempt any work except the response to a real interrupt as they run at a high priority. In fact softirq is just a kernel task running with interrupts enabled and can sleep but has the highest priority amongst running tasks.
Synchronization primitives such as semaphore, spinlock, etc.