Exemplos de ODM_InitAllTimers em C++ (Cpp)

Exemplo n.º 1

Arquivo: rtl8812a_dm.c Projeto: saiarcot895/rtl8811AU_rtl8821A-linux

void rtl8812_init_dm_priv(IN PADAPTER Adapter)
{
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	PDM_ODM_T 		podmpriv = &pHalData->odmpriv;
	memset(pdmpriv, 0, sizeof(struct dm_priv));
	//_rtw_spinlock_init(&(pHalData->odm_stainfo_lock));
	Init_ODM_ComInfo_8812(Adapter);
#ifdef CONFIG_SW_ANTENNA_DIVERSITY
	//_init_timer(&(pdmpriv->SwAntennaSwitchTimer),  Adapter->pnetdev , odm_SW_AntennaSwitchCallback, Adapter);	
	ODM_InitAllTimers(podmpriv );	
#endif
	ODM_InitDebugSetting(podmpriv);

	pHalData->RegRFPathS1 = 0;
	pHalData->TxPwrInPercentage = TX_PWR_PERCENTAGE_3;

#ifdef CONFIG_BT_COEXIST
	/* firmware size issue, btcoex fw doesn't support IQK offload */
	if (pHalData->EEPROMBluetoothCoexist == _FALSE)
#endif
	{
		pHalData->RegIQKFWOffload = 1;
		rtw_sctx_init(&pHalData->iqk_sctx, 0);
	}
}

Exemplo n.º 2

Arquivo: rtl8723b_dm.c Projeto: NextThingCo/RTL8723BS

void rtl8723b_init_dm_priv(IN PADAPTER Adapter)
{
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	PDM_ODM_T 		podmpriv = &pHalData->odmpriv;
	Init_ODM_ComInfo_8723b(Adapter);
	ODM_InitAllTimers(podmpriv );
}

Exemplo n.º 3

Arquivo: rtl8188e_dm.c Projeto: AOSC-Dev/aosc-os-armel-sunxi-boot

void rtl8188e_init_dm_priv(IN PADAPTER Adapter)
{
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	PDM_ODM_T 		podmpriv = &pHalData->odmpriv;

	//_rtw_spinlock_init(&(pHalData->odm_stainfo_lock));
	Init_ODM_ComInfo_88E(Adapter);
	ODM_InitAllTimers(podmpriv );	
	PHYDM_InitDebugSetting(podmpriv);	
}

Exemplo n.º 4

Arquivo: rtl8723a_dm.c Projeto: jasonleeee/Firefly_OC

void rtl8723a_init_dm_priv(IN PADAPTER Adapter)
{
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	PDM_ODM_T 		podmpriv = &pHalData->odmpriv;
	_rtw_memset(pdmpriv, 0, sizeof(struct dm_priv));
	Init_ODM_ComInfo_8723a(Adapter);
#ifdef CONFIG_SW_ANTENNA_DIVERSITY	
	//_init_timer(&(pdmpriv->SwAntennaSwitchTimer),  Adapter->pnetdev , odm_SW_AntennaSwitchCallback, Adapter);	
	ODM_InitAllTimers(podmpriv );	
#endif
}

Exemplo n.º 5

Arquivo: rtl8192e_dm.c Projeto: 1fans/rtl8192eu-linux-driver

void rtl8192e_init_dm_priv(IN PADAPTER Adapter)
{
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	PDM_ODM_T 		podmpriv = &pHalData->odmpriv;
	_rtw_memset(pdmpriv, 0, sizeof(struct dm_priv));
	//_rtw_spinlock_init(&(pHalData->odm_stainfo_lock));
	Init_ODM_ComInfo_8192e(Adapter);
	//_init_timer(&(pdmpriv->SwAntennaSwitchTimer),  Adapter->pnetdev , odm_SW_AntennaSwitchCallback, Adapter);	
	ODM_InitAllTimers(podmpriv );	
	ODM_InitDebugSetting(podmpriv);

	pHalData->RegRFPathS1 = 0;
}

Exemplo n.º 6

Arquivo: rtl8812a_dm.c Projeto: Alex-van-der-Peet/rtl8812AU_8821AU_linux

void rtl8812_init_dm_priv(IN PADAPTER Adapter)
{
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	PDM_ODM_T 		podmpriv = &pHalData->odmpriv;
	_rtw_memset(pdmpriv, 0, sizeof(struct dm_priv));
	//_rtw_spinlock_init(&(pHalData->odm_stainfo_lock));
	Init_ODM_ComInfo_8812(Adapter);
#ifdef CONFIG_SW_ANTENNA_DIVERSITY
	//_init_timer(&(pdmpriv->SwAntennaSwitchTimer),  Adapter->pnetdev , odm_SW_AntennaSwitchCallback, Adapter);	
	ODM_InitAllTimers(podmpriv );	
#endif
	ODM_InitDebugSetting(podmpriv);

	Adapter->registrypriv.RegEnableTxPowerLimit = 0;
	Adapter->registrypriv.RegPowerBase = 14;
	Adapter->registrypriv.RegTxPwrLimit = 0xFFFFFFFF;
	Adapter->registrypriv.TxBBSwing_2G = 0xFF;
	Adapter->registrypriv.TxBBSwing_5G = 0xFF;
	Adapter->registrypriv.bEn_RFE = 0;
	Adapter->registrypriv.RFE_Type = 64;
	pHalData->RegRFPathS1 = 0;
	pHalData->TxPwrInPercentage = TX_PWR_PERCENTAGE_3;
}