Exemplos de PM8XXX_VS300 em C++ (Cpp)

Exemplo n.º 1

Arquivo: board-8960-regulator.c Projeto: Astrali/kernel_msm8625q_f1

msm_pm8921_regulator_pdata[] __devinitdata = {
	/*
	 *		ID   name always_on pd min_uV   max_uV   en_t supply
	 *	system_uA reg_ID
	 */
	PM8XXX_NLDO1200(L26, "8921_l26", 0, 1, 375000, 1050000, 200, "8921_s7",
		0, 1),
	PM8XXX_NLDO1200(L27, "8921_l27", 0, 1, 375000, 1050000, 200, "8921_s7",
		0, 2),
	PM8XXX_NLDO1200(L28, "8921_l28", 0, 1, 375000, 1050000, 200, "8921_s7",
		0, 3),
	PM8XXX_LDO(L29,      "8921_l29", 0, 1, 2050000, 2100000, 200, "8921_s8",
		0, 4),

	/*	     ID        name      always_on pd en_t supply    reg_ID */
	PM8XXX_VS300(USB_OTG,  "8921_usb_otg",  0, 1, 0,   "ext_5v", 5),
	PM8XXX_VS300(HDMI_MVS, "8921_hdmi_mvs", 0, 1, 0,   "ext_5v", 6),
};

static struct rpm_regulator_init_data
msm_rpm_regulator_init_data[] __devinitdata = {
	/*	ID a_on pd ss min_uV   max_uV  supply sys_uA  freq  fm  ss_fm */
	RPM_SMPS(S1, 1, 1, 0, 1225000, 1225000, NULL, 100000, 3p20, NONE, NONE),
	RPM_SMPS(S2, 0, 1, 0, 1300000, 1300000, NULL,      0, 1p60, NONE, NONE),
	RPM_SMPS(S3, 0, 1, 1,  500000, 1150000, NULL, 100000, 4p80, NONE, NONE),
	RPM_SMPS(S4, 1, 1, 0, 1800000, 1800000, NULL, 100000, 1p60, AUTO, AUTO),
	RPM_SMPS(S7, 0, 1, 0, 1150000, 1150000, NULL, 100000, 3p20, NONE, NONE),
	RPM_SMPS(S8, 1, 1, 1, 2050000, 2050000, NULL, 100000, 1p60, NONE, NONE),

	/*	ID     a_on pd ss min_uV   max_uV  supply  sys_uA init_ip */
	RPM_LDO(L1,	 1, 1, 0, 1050000, 1050000, "8921_s4", 0, 10000),

Exemplo n.º 2

Arquivo: board-sony_yuga-regulator.c Projeto: XperiaZProject/Sony_Kernel

	PM8XXX_LDO(L33,      "8917_l33", 0, 1, 2800000, 2800000, 200, NULL,
		0, 5),
	PM8XXX_LDO(L34,      "8917_l34", 0, 1, 1800000, 1800000, 200, NULL,
		0, 6),
	PM8XXX_LDO(L35,      "8917_l35", 0, 1, 3000000, 3000000, 200, NULL,
		0, 7),
	PM8XXX_LDO(L36,      "8917_l36", 0, 1, 1800000, 1800000, 200, NULL,
		0, 8),

	/*
	 *           ID     name   always_on  min_uV   max_uV en_t supply reg_ID
	 */
	PM8XXX_BOOST(BOOST, "8917_boost", 0,  5000000, 5000000, 500, NULL, 9),

	/*	     ID        name      always_on pd en_t supply    reg_ID */
	PM8XXX_VS300(USB_OTG,  "8921_usb_otg",  0, 1, 0,   "8917_boost", 10),
};
static struct rpm_regulator_init_data
apq8064_rpm_regulator_init_data[] __devinitdata = {
	/*	ID a_on pd ss min_uV   max_uV  supply sys_uA  freq  fm  ss_fm */
	RPM_SMPS(S1, 1, 1, 0, 1225000, 1225000, NULL, 100000, 3p20, NONE, NONE),
	RPM_SMPS(S2, 0, 1, 0, 1300000, 1300000, NULL,      0, 1p60, NONE, NONE),
	RPM_SMPS(S3, 0, 1, 1,  500000, 1150000, NULL, 100000, 4p80, NONE, NONE),
	RPM_SMPS(S4, 1, 1, 0, 1800000, 1800000, NULL, 100000, 1p60, NONE, NONE),
	RPM_SMPS(S7, 0, 0, 0, 1300000, 1300000, NULL, 100000, 3p20, NONE, NONE),

	/*	ID a_on pd ss min_uV   max_uV   supply    sys_uA init_ip */
	RPM_LDO(L1,  1, 1, 0, 1100000, 1100000, "8921_s4",     0, 1000),
	RPM_LDO(L2,  0, 1, 0, 1200000, 1200000, "8921_s4",     0,     0),
	RPM_LDO(L3,  0, 1, 0, 3075000, 3300000, NULL,          0,     0),
	RPM_LDO(L4,  1, 1, 0, 1800000, 1800000, NULL,          0, 10000),

Exemplo n.º 3

Arquivo: board-sony_odin-regulator.c Projeto: AOKP/kernel_sony_apq8064

	SAW_VREG_INIT(8821_S0, "8821_s0",       850000, 1300000);
struct regulator_init_data msm8064_saw_regulator_pdata_8821_s1 =
	SAW_VREG_INIT(8821_S1, "8821_s1",       850000, 1300000);

/* PM8921 regulator constraints */
struct pm8xxx_regulator_platform_data
msm8064_pm8921_regulator_pdata[] __devinitdata = {
	/*
	 *		ID   name always_on pd min_uV   max_uV   en_t supply
	 *	system_uA reg_ID
	 */
	PM8XXX_NLDO1200(L26, "8921_l26", 0, 1, 375000, 1050000, 200, "8921_s7",
		0, 1),

	/*           ID        name     always_on pd       en_t supply reg_ID */
	PM8XXX_VS300(USB_OTG,  "8921_usb_otg",  0, 0,         0, NULL, 2),
	PM8XXX_VS300(HDMI_MVS, "8921_hdmi_mvs", 0, 0,         0, NULL, 3),

	PM8XXX_LDO(L29,      "8921_l29", 0, 1, 1800000, 1800000, 200, NULL,
		0, 4),
};

/* PM8917 regulator constraints */
struct pm8xxx_regulator_platform_data
msm8064_pm8917_regulator_pdata[] __devinitdata = {
	/*
	 *		ID   name always_on pd min_uV   max_uV   en_t supply
	 *	system_uA reg_ID
	 */
	PM8XXX_NLDO1200(L26, "8921_l26", 0, 1, 375000, 1050000, 200, "8921_s7",
		0, 1),

Exemplo n.º 4

	SAW_VREG_INIT(8821_S0, "8821_s0",       850000, 1200000);
struct regulator_init_data msm8064_saw_regulator_pdata_8821_s1 =
	SAW_VREG_INIT(8821_S1, "8821_s1",       850000, 1200000);

/* PM8921 regulator constraints */
struct pm8xxx_regulator_platform_data
msm8064_pm8921_regulator_pdata[] __devinitdata = {
	/*
	 *		ID   name always_on pd min_uV   max_uV   en_t supply
	 *	system_uA reg_ID
	 */
	PM8XXX_NLDO1200(L26, "8921_l26", 0, 1, 375000, 1050000, 200, "8921_s7",
		0, 1),
#ifdef CONFIG_USB_OTG
	/*           ID        name     always_on pd       en_t supply reg_ID */
	PM8XXX_VS300(USB_OTG,  "8921_usb_otg",  0, 1,         0, "ext_5v", 2),
//	PM8XXX_VS300(USB_OTG,  "8921_usb_otg",  0, 0,         0, "ext_5v", 2),
//	PM8XXX_VS300(HDMI_MVS, "8921_hdmi_mvs", 0, 1,         0, "ext_5v", 3),
#endif /* CONFIG_USB_OTG */
};

static struct rpm_regulator_init_data
apq8064_rpm_regulator_init_data[] __devinitdata = {
	/*	ID a_on pd ss min_uV   max_uV  supply sys_uA  freq  fm  ss_fm */
	RPM_SMPS(S1, 1, 1, 0, 1225000, 1225000, NULL, 100000, 3p20, NONE, NONE),
	RPM_SMPS(S2, 0, 1, 0, 1300000, 1300000, NULL,      0, 1p60, NONE, NONE),
	RPM_SMPS(S3, 0, 1, 1,  500000, 1150000, NULL, 100000, 4p80, NONE, NONE),
	RPM_SMPS(S4, 1, 1, 0, 1800000, 1800000, NULL, 100000, 1p60, AUTO, AUTO),
	RPM_SMPS(S7, 0, 0, 0, 1300000, 1300000, NULL, 100000, 3p20, NONE, NONE),
#if defined(CONFIG_MACH_LGE) && defined(CONFIG_IMX091)
	RPM_SMPS(S8, 0, 1, 0, 1800000, 1800000, NULL, 100000, 1p60, NONE, NONE),

Exemplo n.º 5

Arquivo: board-8064-regulator.c Projeto: BlownFuze/Koding

	PM8XXX_LDO(L22, "8921_l22", 0, 1, 2600000, 2600000, 200, NULL, 0, 23),
	PM8XXX_LDO(L23, "8921_l23", 0, 1, 1800000, 1800000, 200, NULL, 0, 24),
	PM8XXX_NLDO1200(L24, "8921_l24", 1, 1, 1150000, 1150000, 200, "8921_s1",
		10000, 25),
	PM8XXX_NLDO1200(L25, "8921_l25", 1, 1, 1225000, 1225000, 200, "8921_s1",
		0, 26),
	PM8XXX_NLDO1200(L26, "8921_l26", 0, 1, 1050000, 1050000, 200, "8921_s7",
		0, 27),
	PM8XXX_NLDO1200(L27, "8921_l27", 0, 1, 1000000, 1000000, 200, "8921_s7",
		0, 28),
	PM8XXX_NLDO1200(L28, "8921_l28", 0, 1, 1050000, 1050000, 200, "8921_s7",
		0, 29),

	/*        ID       name  always_on pd              en_t supply reg_ID */
	PM8XXX_VS(LVS1,	   "8921_lvs1", 0, 1,                 0, "8921_s4", 30),
	PM8XXX_VS300(LVS2, "8921_lvs2", 0, 1,                 0, "8921_s1", 31),
	PM8XXX_VS(LVS3,    "8921_lvs3", 0, 1,                 0, "8921_s4", 32),
	PM8XXX_VS(LVS4,    "8921_lvs4", 0, 1,                 0, "8921_s4", 33),
	PM8XXX_VS(LVS5,    "8921_lvs5", 0, 1,                 0, "8921_s4", 34),
	PM8XXX_VS(LVS6,    "8921_lvs6", 0, 1,                 0, "8921_s4", 35),
	PM8XXX_VS(LVS7,    "8921_lvs7", 1, 1,                 0, "8921_s4", 36),

	PM8XXX_VS300(USB_OTG,  "8921_usb_otg",  0, 1,         0, NULL, 37),
	PM8XXX_VS300(HDMI_MVS, "8921_hdmi_mvs", 0, 1,         0, NULL, 38),

	/*         ID   name  always_on   min_uV   max_uV  en_t supply reg_ID */
	PM8XXX_NCP(NCP,	"8921_ncp", 0,    1800000, 1800000, 200, "8921_l6", 39),
};

int msm8064_pm8921_regulator_pdata_len __devinitdata =
	ARRAY_SIZE(msm8064_pm8921_regulator_pdata);

Exemplo n.º 6

Arquivo: board-blue_tsubasa-regulator.c Projeto: FrozenCow/android_kernel_sony_msm8960

msm_pm8921_regulator_pdata[] __devinitdata = {
	/*
	 *		ID   name always_on pd min_uV   max_uV   en_t supply
	 *	system_uA reg_ID
	 */
	PM8XXX_NLDO1200(L26, "8921_l26", 0, 1, 375000, 1050000, 200, "8921_s7",
		0, 1),
	PM8XXX_NLDO1200(L27, "8921_l27", 0, 1, 375000, 1050000, 200, "8921_s7",
		0, 2),
	PM8XXX_NLDO1200(L28, "8921_l28", 0, 1, 375000, 1050000, 200, "8921_s7",
		0, 3),
	PM8XXX_LDO(L29,      "8921_l29", 0, 1, 1800000, 1800000, 200, "8921_s8",
		0, 4),

	/*	     ID        name      always_on pd en_t supply    reg_ID */
	PM8XXX_VS300(USB_OTG,  "8921_usb_otg",  0, 1, 0,   NULL, 5),
	PM8XXX_VS300(HDMI_MVS, "8921_hdmi_mvs", 0, 1, 0,   NULL, 6),
};

static struct rpm_regulator_init_data
msm_rpm_regulator_init_data[] __devinitdata = {
	/*	ID a_on pd ss min_uV   max_uV  supply sys_uA  freq  fm  ss_fm */
	RPM_SMPS(S1, 1, 1, 0, 1225000, 1225000, NULL, 100000, 3p20, NONE, NONE),
	RPM_SMPS(S2, 0, 1, 0, 1300000, 1300000, NULL,      0, 1p60, NONE, NONE),
	RPM_SMPS(S3, 0, 1, 1,  500000, 1150000, NULL, 100000, 4p80, NONE, NONE),
	RPM_SMPS(S4, 1, 1, 0, 1800000, 1800000, NULL, 100000, 1p60, NONE, NONE),
	RPM_SMPS(S7, 0, 1, 0, 1150000, 1150000, NULL, 100000, 3p20, NONE, NONE),
	RPM_SMPS(S8, 1, 1, 1, 2050000, 2050000, NULL, 100000, 1p60, NONE, NONE),

	/*	ID     a_on pd ss min_uV   max_uV  supply  sys_uA init_ip */
	RPM_LDO(L1,	 1, 1, 0, 1050000, 1050000, "8921_s4", 0, 10000),