PaError TestOnce( int buffersize, PaDeviceIndex device )
{
PaStreamParameters outputParameters;
PaStream *stream;
PaError err;
paTestData data;
int i;
int totalSamps;
/* initialise sinusoidal wavetable */
for( i=0; i<TABLE_SIZE; i++ )
{
data.sine[i] = (short) (32767.0 * sin( ((double)i/(double)TABLE_SIZE) * M_PI * 2. ));
}
data.left_phase = data.right_phase = 0;
data.sampsToGo = totalSamps = NUM_SECONDS * SAMPLE_RATE; /* Play for a few seconds. */
err = Pa_Initialize();
if( err != paNoError ) goto error;
if( device == -1 )
outputParameters.device = Pa_GetDefaultOutputDevice(); /* default output device */
else
outputParameters.device = device ;
if (outputParameters.device == paNoDevice) {
fprintf(stderr,"Error: No default output device.\n");
goto error;
}
outputParameters.channelCount = 2; /* stereo output */
outputParameters.sampleFormat = paInt16; /* 32 bit floating point output */
outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo = NULL;
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
buffersize, /* frames per buffer */
(paClipOff | paDitherOff),
patest1Callback,
&data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("Waiting for sound to finish.\n");
Pa_Sleep(1000*NUM_SECONDS);
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
return paNoError;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
fprintf( stderr, "Host Error message: %s\n", Pa_GetLastHostErrorInfo()->errorText );
return err;
}
static void logPortAudioError(const char *msg, PaError error)
{
if (error == paUnanticipatedHostError) {
const PaHostErrorInfo *info = Pa_GetLastHostErrorInfo();
qCritical("%s: unanticipated host error: %s (%ld)",
msg, info->errorText, info->errorCode);
} else {
qCritical("%s: %s", msg, Pa_GetErrorText(error));
}
}
static bool check_pa_ret(struct mp_log *log, int ret)
{
if (ret < 0) {
mp_err(log, "%s\n", Pa_GetErrorText(ret));
if (ret == paUnanticipatedHostError) {
const PaHostErrorInfo* hosterr = Pa_GetLastHostErrorInfo();
mp_err(log, "Host error: %s\n", hosterr->errorText);
}
return false;
}
return true;
}
static bool check_pa_ret(int ret)
{
if (ret < 0) {
mp_msg(MSGT_AO, MSGL_ERR, "[ao/portaudio] %s\n",
Pa_GetErrorText(ret));
if (ret == paUnanticipatedHostError) {
const PaHostErrorInfo* hosterr = Pa_GetLastHostErrorInfo();
mp_msg(MSGT_AO, MSGL_ERR, "[ao/portaudio] Host error: %s\n",
hosterr->errorText);
}
return false;
}
return true;
}
// Throw an exception on error.
jint jpa_CheckError( JNIEnv *env, PaError err )
{
if( err == -1 )
{
return jpa_ThrowErrorNoCode( env, "-1, possibly no available default device" );
}
else if( err < 0 )
{
if( err == paUnanticipatedHostError )
{
const PaHostErrorInfo *hostErrorInfo = Pa_GetLastHostErrorInfo();
return jpa_ThrowError( env, err, hostErrorInfo->errorText );
}
else
{
return jpa_ThrowError( env, err, Pa_GetErrorText( err ) );
}
}
else
{
return err;
}
}
int main(int argc, char* argv[])
{
PaStream *stream;
PaError err;
patest1data data;
int i;
PaStreamParameters inputParameters, outputParameters;
const PaHostErrorInfo* herr;
printf("patest1.c\n"); fflush(stdout);
printf("Ring modulate input for 20 seconds.\n"); fflush(stdout);
/* initialise sinusoidal wavetable */
for( i=0; i<100; i++ )
data.sine[i] = sin( ((double)i/100.) * M_PI * 2. );
data.phase = 0;
data.sampsToGo = SAMPLE_RATE * 20; /* 20 seconds. */
/* initialise portaudio subsytem */
err = Pa_Initialize();
inputParameters.device = Pa_GetDefaultInputDevice(); /* default input device */
if (inputParameters.device == paNoDevice) {
fprintf(stderr,"Error: No input default device.\n");
goto done;
}
inputParameters.channelCount = 2; /* stereo input */
inputParameters.sampleFormat = paFloat32; /* 32 bit floating point input */
inputParameters.suggestedLatency = Pa_GetDeviceInfo( inputParameters.device )->defaultLowInputLatency;
inputParameters.hostApiSpecificStreamInfo = NULL;
outputParameters.device = Pa_GetDefaultOutputDevice(); /* default output device */
if (outputParameters.device == paNoDevice) {
fprintf(stderr,"Error: No default output device.\n");
goto done;
}
outputParameters.channelCount = 2; /* stereo output */
outputParameters.sampleFormat = paFloat32; /* 32 bit floating point output */
outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo = NULL;
err = Pa_OpenStream(
&stream,
&inputParameters,
&outputParameters,
(double)SAMPLE_RATE, /* Samplerate in Hertz. */
512, /* Small buffers */
paClipOff, /* We won't output out of range samples so don't bother clipping them. */
patest1Callback,
&data );
if( err != paNoError ) goto done;
err = Pa_StartStream( stream );
if( err != paNoError ) goto done;
printf( "Press any key to end.\n" ); fflush(stdout);
getc( stdin ); /* wait for input before exiting */
err = Pa_AbortStream( stream );
if( err != paNoError ) goto done;
printf( "Waiting for stream to complete...\n" );
/* sleep until playback has finished */
while( ( err = Pa_IsStreamActive( stream ) ) == 1 ) Pa_Sleep(1000);
if( err < 0 ) goto done;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto done;
done:
Pa_Terminate();
if( err != paNoError )
{
fprintf( stderr, "An error occured while using portaudio\n" );
if( err == paUnanticipatedHostError )
{
fprintf( stderr, " unanticipated host error.\n");
herr = Pa_GetLastHostErrorInfo();
if (herr)
{
fprintf( stderr, " Error number: %ld\n", herr->errorCode );
if (herr->errorText)
fprintf( stderr, " Error text: %s\n", herr->errorText );
}
else
fprintf( stderr, " Pa_GetLastHostErrorInfo() failed!\n" );
}
else
{
fprintf( stderr, " Error number: %d\n", err );
fprintf( stderr, " Error text: %s\n", Pa_GetErrorText( err ) );
}
err = 1; /* Always return 0 or 1, but no other return codes. */
}
printf( "bye\n" );
return err;
}
static int PAOpenStream( audio_output_t *p_aout )
{
aout_sys_t *p_sys = p_aout->sys;
const PaHostErrorInfo* paLastHostErrorInfo = Pa_GetLastHostErrorInfo();
PaStreamParameters paStreamParameters;
vlc_value_t val;
int i_channels, i_err;
uint32_t i_channel_mask;
if( var_Get( p_aout, "audio-device", &val ) < 0 )
{
return VLC_EGENERIC;
}
if( val.i_int == AOUT_VAR_5_1 )
{
p_aout->format.i_physical_channels
= AOUT_CHAN_LEFT | AOUT_CHAN_RIGHT | AOUT_CHAN_CENTER
| AOUT_CHAN_REARLEFT | AOUT_CHAN_REARRIGHT
| AOUT_CHAN_LFE;
}
else if( val.i_int == AOUT_VAR_3F2R )
{
p_aout->format.i_physical_channels
= AOUT_CHAN_LEFT | AOUT_CHAN_RIGHT | AOUT_CHAN_CENTER
| AOUT_CHAN_REARLEFT | AOUT_CHAN_REARRIGHT;
}
else if( val.i_int == AOUT_VAR_2F2R )
{
p_aout->format.i_physical_channels
= AOUT_CHAN_LEFT | AOUT_CHAN_RIGHT
| AOUT_CHAN_REARLEFT | AOUT_CHAN_REARRIGHT;
}
else if( val.i_int == AOUT_VAR_MONO )
{
p_aout->format.i_physical_channels = AOUT_CHAN_CENTER;
}
else
{
p_aout->format.i_physical_channels
= AOUT_CHAN_LEFT | AOUT_CHAN_RIGHT;
}
i_channels = aout_FormatNbChannels( &p_aout->format );
msg_Dbg( p_aout, "nb_channels requested = %d", i_channels );
i_channel_mask = p_aout->format.i_physical_channels;
/* Calculate the frame size in bytes */
p_sys->i_sample_size = 4 * i_channels;
aout_FormatPrepare( &p_aout->format );
aout_PacketInit( p_aout, &p_sys->packet, FRAME_SIZE );
aout_VolumeSoftInit( p_aout );
/* Check for channel reordering */
p_aout->sys->i_channel_mask = i_channel_mask;
p_aout->sys->i_bits_per_sample = 32; /* forced to paFloat32 */
p_aout->sys->i_channels = i_channels;
p_aout->sys->b_chan_reorder =
aout_CheckChannelReorder( NULL, pi_channels_out,
i_channel_mask, i_channels,
p_aout->sys->pi_chan_table );
if( p_aout->sys->b_chan_reorder )
{
msg_Dbg( p_aout, "channel reordering needed" );
}
paStreamParameters.device = p_sys->i_device_id;
paStreamParameters.channelCount = i_channels;
paStreamParameters.sampleFormat = paFloat32;
paStreamParameters.suggestedLatency =
p_sys->deviceInfo->defaultLowOutputLatency;
paStreamParameters.hostApiSpecificStreamInfo = NULL;
i_err = Pa_OpenStream( &p_sys->p_stream, NULL /* no input */,
&paStreamParameters, (double)p_aout->format.i_rate,
FRAME_SIZE, paClipOff, paCallback, p_sys );
if( i_err != paNoError )
{
msg_Err( p_aout, "Pa_OpenStream returns %d : %s", i_err,
Pa_GetErrorText( i_err ) );
if( i_err == paUnanticipatedHostError )
{
msg_Err( p_aout, "type %d code %ld : %s",
paLastHostErrorInfo->hostApiType,
paLastHostErrorInfo->errorCode,
paLastHostErrorInfo->errorText );
}
p_sys->p_stream = 0;
aout_PacketDestroy( p_aout );
return VLC_EGENERIC;
}
i_err = Pa_StartStream( p_sys->p_stream );
if( i_err != paNoError )
{
msg_Err( p_aout, "Pa_StartStream() failed" );
Pa_CloseStream( p_sys->p_stream );
aout_PacketDestroy( p_aout );
return VLC_EGENERIC;
}
return VLC_SUCCESS;
}
void* AudioThread::Entry()
{
GlobalConfig* config = GlobalConfig::getInstance();
config->Log( "AudioThread::Entry();" );
m_Done = false;
m_PaStreamIsActive = false;
int cnt=0;
while( not m_Done )
{
// Check Audio-Device-State every 100 ms
switch( m_AudioState )
{
case STATE_CLOSED:
{
config->Log( "Audiothread-STATE: CLOSED" );
// closed ?!? Then try to configure it...
Configure();
break;
}
case STATE_OPEN:
{
config->Log( "Audiothread-STATE: OPEN" );
// Open, but not running? Then start it by all means...
int err=Pa_StartStream( m_PaStream );
int cnt=0;
while( err != paNoError && cnt<5 )
{
err = Pa_StartStream( m_PaStream );
cnt++;
}
if( err == paNoError )
{
m_PaStreamIsActive = true;
config->Log( "Audiothread-STATE: OPEN and Portaudio-Stream successfully started." );
config->Log( " Portaudio-Error-Code: %i ", err );
config->Log( " Portaudio-Error-Text: %s ", Pa_GetErrorText( err ) );
m_AudioState = STATE_RUNNING;
}
else
{
m_AudioState = STATE_ERROR;
config->Log( "Audiothread-STATE: OPEN and Portaudio-Stream *NOT* successfully started." );
config->Log( " Portaudio-Error-Code: %i ", err );
config->Log( " Portaudio-Error-Text: %s ", Pa_GetErrorText( err ) );
}
// change audio-state to running...
break;
}
case STATE_ERROR:
{
// close all active streams ...
if( m_PaStreamIsActive )
{
Pa_CloseStream( m_PaStream );
m_PaStreamIsActive = false;
}
// send an event, so the user can notice that there is something
// going wrong badly...
//wxWindow* statusWindow = Config->getStatusWindow();
//wxCommandEvent event(wxEVT_COMMAND_MIXER_ERROR);
//statusWindow->AddPendingEvent( event );
// now wait here(!) until the user changes the configuration
// again
while( m_AudioState == STATE_ERROR )
{
config->Log( "Audiothread-STATE: *** ERROR ***" );
// Check for reconfiguration-request...
m_ReconfigureLock.Lock();
if( m_ReconfigureFlag )
{
// reset flag
m_ReconfigureFlag = false;
// change AudioState
m_AudioState = STATE_CLOSED;
}
m_ReconfigureLock.Unlock();
Sleep( 1000 ); // wait a second
}
break;
}
case STATE_RUNNING:
default:
{
// do nothing but wait for reconfigure-flag... and check that
// all audio-streams are up and running...
cnt = (cnt+1)%80;
if( cnt==0 )
{
double cpuLoad = Pa_GetStreamCpuLoad( m_PaStream );
config->Log( "Audiothread-STATE: RUNNING (%f)",
floor(cpuLoad*1000.0+0.5)/10.0 );
}
// Check for reconfiguration-request...
m_ReconfigureLock.Lock();
if( m_ReconfigureFlag )
{
// close all active streams and change state...
if( m_PaStreamIsActive )
{
Pa_CloseStream( m_PaStream );
m_PaStreamIsActive = false;
}
// reset flag
m_ReconfigureFlag = false;
// change AudioState
m_AudioState = STATE_CLOSED;
}
m_ReconfigureLock.Unlock();
// Check that everything is OK with the streams...
if( m_PaStreamIsActive )
{
if( Pa_IsStreamActive( m_PaStream ) != 1 )
{
// flag error
m_AudioState = STATE_ERROR;
// try to get some information on the
// error...
const PaHostErrorInfo* errorInfo = Pa_GetLastHostErrorInfo();
config->Log( "PaGetLastErrorInfo: %i %i %s", (int)errorInfo->hostApiType, errorInfo->errorCode, errorInfo->errorText );
}
}
}
}
Sleep( 100 ); // wait for 100 ms
}
// close all active streams ...
if( m_PaStreamIsActive )
{
Pa_StopStream( m_PaStream );
Pa_CloseStream( m_PaStream );
m_PaStreamIsActive = false;
}
// all finished here...
return( 0 );
}
void AudioThread::Configure()
{
GlobalConfig* config = GlobalConfig::getInstance();
config->Log( "AudioThread::Configure();" );
// Try to configure Audio-Hardware
bool everythingIsOk = true;
bool outputIsOpen = false;
// ------------------------------------------------------------------------
// ------------------------------------------------------------------------
// test desired output-device for allowed sample-rates
// ------------------------------------------------------------------------
// ------------------------------------------------------------------------
int PortaudioDeviceIndexOut = config->getOutputDevice_PA();
int PortaudioDeviceIndexIn = config->getInputDevice_PA ();
m_SampleRate = config->getSampleRate();
config->Log( "Input-Device = %i", PortaudioDeviceIndexIn );
config->Log( "Output-Device = %i", PortaudioDeviceIndexOut );
config->Log( "Sample-Rate = %f", m_SampleRate );
// if we got a valid result, then open the output-device
if( m_SampleRate > 0 and everythingIsOk )
{
// all parameters in m_PaParameters are set, now, so we just need to
// setup the callback-address and decide how many frames per buffer
// we want to have...
memset( &m_PaParametersIn, 0, sizeof( m_PaParametersIn ) );
memset( &m_PaParametersOut, 0, sizeof( m_PaParametersOut ) );
double inputLatency = Pa_GetDeviceInfo( PortaudioDeviceIndexOut )
->defaultLowInputLatency;
double outputLatency = inputLatency;
config->Log( "Latency-In : %f seconds", inputLatency*m_SampleRate );
config->Log( "Latency-Out : %f seconds", outputLatency*m_SampleRate );
m_FramesPerBuffer = inputLatency*m_SampleRate/10.0;
m_PaParametersOut.device = PortaudioDeviceIndexOut;
m_PaParametersOut.channelCount = 2;
m_PaParametersOut.suggestedLatency = outputLatency*3;
m_PaParametersOut.sampleFormat = paFloat32;
m_PaParametersOut.hostApiSpecificStreamInfo = NULL;
m_PaParametersIn.device = PortaudioDeviceIndexIn;
m_PaParametersIn.channelCount = 2;
m_PaParametersIn.suggestedLatency = inputLatency*3;
m_PaParametersIn.sampleFormat = paFloat32;
m_PaParametersIn.hostApiSpecificStreamInfo = NULL;
int err = Pa_OpenStream( &m_PaStream,
&m_PaParametersIn,
&m_PaParametersOut,
m_SampleRate,
paFramesPerBufferUnspecified,//m_FramesPerBuffer,
paNeverDropInput,//paNoFlag,
&(this->PaCallback),
(void *)this );
if( err != paNoError )
{
config->Log( "*** Portaudio-Error, when opening Device:" );
config->Log( "*** %s", Pa_GetErrorText(err) );
everythingIsOk = false;
}
else
{
outputIsOpen = true;
}
}
else
{
config->Log( "*** Samplerate-Test failed on Device." );
everythingIsOk = false;
}
if( everythingIsOk )
{
// Yessss.... we're open, now... ;-)
wxMutexLocker lock( m_ThreadMutex );
m_AudioState = STATE_OPEN;
delete m_SDRAudio;
m_SDRAudio = new SDRAudio( m_SampleRate );
}
else
{
// oops... something went bad... so, we close all already opened audio-
// devices (if any)...
if( outputIsOpen )
{
Pa_CloseStream( &m_PaStream );
}
m_AudioState = STATE_ERROR;
// try to get some information on the
// error...
const PaHostErrorInfo* errorInfo = Pa_GetLastHostErrorInfo();
config->Log( "PaGetLastErrorInfo: %i %i %s",
(int)errorInfo->hostApiType,
errorInfo->errorCode,
errorInfo->errorText );
}
}
JNIEXPORT jobject JNICALL Java_com_github_rjeschke_jpa_JPA_getLastHostErrorInfo(JNIEnv *env, jclass clazz)
{
const PaHostErrorInfo *inf = Pa_GetLastHostErrorInfo();
return inf ? toHostErrorInfo(env, inf) : 0;
}