/*
* Write the supplied data to the specified strip.
*
* NB: Image length must be setup before writing.
*/
tsize_t
TIFFWriteRawStrip(TIFF *tif, tstrip_t strip, tdata_t data, tsize_t cc)
{
static const char module[] = "TIFFWriteRawStrip";
TIFFDirectory *td = &tif->tif_dir;
if (!WRITECHECKSTRIPS(tif, module))
return ((tsize_t) -1);
/*
* Check strip array to make sure there's space.
* We don't support dynamically growing files that
* have data organized in separate bitplanes because
* it's too painful. In that case we require that
* the imagelength be set properly before the first
* write (so that the strips array will be fully
* allocated above).
*/
if (strip >= td->td_nstrips)
{
if (td->td_planarconfig == PLANARCONFIG_SEPARATE)
{
TIFFErrorExt(tif->tif_clientdata, tif->tif_name,
"Can not grow image by strips when using separate planes");
return ((tsize_t) -1);
}
/*
* Watch out for a growing image. The value of
* strips/image will initially be 1 (since it
* can't be deduced until the imagelength is known).
*/
if (strip >= td->td_stripsperimage)
td->td_stripsperimage =
TIFFhowmany(td->td_imagelength, td->td_rowsperstrip);
if (!TIFFGrowStrips(tif, 1, module))
return ((tsize_t) -1);
}
tif->tif_curstrip = strip;
tif->tif_row = (strip % td->td_stripsperimage) * td->td_rowsperstrip;
return (TIFFAppendToStrip(tif, strip, (tidata_t) data, cc) ?
cc : (tsize_t) -1);
}
int
TIFFWriteScanline(TIFF* tif, void* buf, uint32 row, uint16 sample)
{
static const char module[] = "TIFFWriteScanline";
register TIFFDirectory *td;
int status, imagegrew = 0;
uint32 strip;
if (!WRITECHECKSTRIPS(tif, module))
return (-1);
/*
* Handle delayed allocation of data buffer. This
* permits it to be sized more intelligently (using
* directory information).
*/
if (!BUFFERCHECK(tif))
return (-1);
tif->tif_flags |= TIFF_BUF4WRITE; /* not strictly sure this is right*/
td = &tif->tif_dir;
/*
* Extend image length if needed
* (but only for PlanarConfig=1).
*/
if (row >= td->td_imagelength) { /* extend image */
if (td->td_planarconfig == PLANARCONFIG_SEPARATE) {
TIFFErrorExt(tif->tif_clientdata, module,
"Can not change \"ImageLength\" when using separate planes");
return (-1);
}
td->td_imagelength = row+1;
imagegrew = 1;
}
/*
* Calculate strip and check for crossings.
*/
if (td->td_planarconfig == PLANARCONFIG_SEPARATE) {
if (sample >= td->td_samplesperpixel) {
TIFFErrorExt(tif->tif_clientdata, module,
"%lu: Sample out of range, max %lu",
(unsigned long) sample, (unsigned long) td->td_samplesperpixel);
return (-1);
}
strip = sample*td->td_stripsperimage + row/td->td_rowsperstrip;
} else
strip = row / td->td_rowsperstrip;
/*
* Check strip array to make sure there's space. We don't support
* dynamically growing files that have data organized in separate
* bitplanes because it's too painful. In that case we require that
* the imagelength be set properly before the first write (so that the
* strips array will be fully allocated above).
*/
if (strip >= td->td_nstrips && !TIFFGrowStrips(tif, 1, module))
return (-1);
if (strip != tif->tif_curstrip) {
/*
* Changing strips -- flush any data present.
*/
if (!TIFFFlushData(tif))
return (-1);
tif->tif_curstrip = strip;
/*
* Watch out for a growing image. The value of strips/image
* will initially be 1 (since it can't be deduced until the
* imagelength is known).
*/
if (strip >= td->td_stripsperimage && imagegrew)
td->td_stripsperimage =
TIFFhowmany_32(td->td_imagelength,td->td_rowsperstrip);
if (td->td_stripsperimage == 0) {
TIFFErrorExt(tif->tif_clientdata, module, "Zero strips per image");
return (-1);
}
tif->tif_row =
(strip % td->td_stripsperimage) * td->td_rowsperstrip;
if ((tif->tif_flags & TIFF_CODERSETUP) == 0) {
if (!(*tif->tif_setupencode)(tif))
return (-1);
tif->tif_flags |= TIFF_CODERSETUP;
}
tif->tif_rawcc = 0;
tif->tif_rawcp = tif->tif_rawdata;
if( td->td_stripbytecount[strip] > 0 )
{
/* if we are writing over existing tiles, zero length */
td->td_stripbytecount[strip] = 0;
/* this forces TIFFAppendToStrip() to do a seek */
tif->tif_curoff = 0;
}
if (!(*tif->tif_preencode)(tif, sample))
return (-1);
tif->tif_flags |= TIFF_POSTENCODE;
}
/*
* Ensure the write is either sequential or at the
* beginning of a strip (or that we can randomly
* access the data -- i.e. no encoding).
*/
if (row != tif->tif_row) {
if (row < tif->tif_row) {
/*
* Moving backwards within the same strip:
* backup to the start and then decode
* forward (below).
*/
tif->tif_row = (strip % td->td_stripsperimage) *
td->td_rowsperstrip;
tif->tif_rawcp = tif->tif_rawdata;
}
/*
* Seek forward to the desired row.
*/
if (!(*tif->tif_seek)(tif, row - tif->tif_row))
return (-1);
tif->tif_row = row;
}
/* swab if needed - note that source buffer will be altered */
tif->tif_postdecode( tif, (uint8*) buf, tif->tif_scanlinesize );
status = (*tif->tif_encoderow)(tif, (uint8*) buf,
tif->tif_scanlinesize, sample);
/* we are now poised at the beginning of the next row */
tif->tif_row = row + 1;
return (status);
}
/*
* Encode the supplied data and write it to the
* specified strip.
*
* NB: Image length must be setup before writing.
*/
tmsize_t
TIFFWriteEncodedStrip(TIFF* tif, uint32 strip, void* data, tmsize_t cc)
{
static const char module[] = "TIFFWriteEncodedStrip";
TIFFDirectory *td = &tif->tif_dir;
uint16 sample;
if (!WRITECHECKSTRIPS(tif, module))
return ((tmsize_t) -1);
/*
* Check strip array to make sure there's space.
* We don't support dynamically growing files that
* have data organized in separate bitplanes because
* it's too painful. In that case we require that
* the imagelength be set properly before the first
* write (so that the strips array will be fully
* allocated above).
*/
if (strip >= td->td_nstrips) {
if (td->td_planarconfig == PLANARCONFIG_SEPARATE) {
TIFFErrorExt(tif->tif_clientdata, module,
"Can not grow image by strips when using separate planes");
return ((tmsize_t) -1);
}
if (!TIFFGrowStrips(tif, 1, module))
return ((tmsize_t) -1);
td->td_stripsperimage =
TIFFhowmany_32(td->td_imagelength, td->td_rowsperstrip);
}
/*
* Handle delayed allocation of data buffer. This
* permits it to be sized according to the directory
* info.
*/
if (!BUFFERCHECK(tif))
return ((tmsize_t) -1);
tif->tif_flags |= TIFF_BUF4WRITE;
tif->tif_curstrip = strip;
if (td->td_stripsperimage == 0) {
TIFFErrorExt(tif->tif_clientdata, module, "Zero strips per image");
return ((tmsize_t) -1);
}
tif->tif_row = (strip % td->td_stripsperimage) * td->td_rowsperstrip;
if ((tif->tif_flags & TIFF_CODERSETUP) == 0) {
if (!(*tif->tif_setupencode)(tif))
return ((tmsize_t) -1);
tif->tif_flags |= TIFF_CODERSETUP;
}
if( td->td_stripbytecount[strip] > 0 )
{
/* Make sure that at the first attempt of rewriting the tile, we will have */
/* more bytes available in the output buffer than the previous byte count, */
/* so that TIFFAppendToStrip() will detect the overflow when it is called the first */
/* time if the new compressed tile is bigger than the older one. (GDAL #4771) */
if( tif->tif_rawdatasize <= (tmsize_t)td->td_stripbytecount[strip] )
{
if( !(TIFFWriteBufferSetup(tif, NULL,
(tmsize_t)TIFFroundup_64((uint64)(td->td_stripbytecount[strip] + 1), 1024))) )
return ((tmsize_t)(-1));
}
/* Force TIFFAppendToStrip() to consider placing data at end
of file. */
tif->tif_curoff = 0;
}
tif->tif_rawcc = 0;
tif->tif_rawcp = tif->tif_rawdata;
tif->tif_flags &= ~TIFF_POSTENCODE;
/* shortcut to avoid an extra memcpy() */
if( td->td_compression == COMPRESSION_NONE )
{
/* swab if needed - note that source buffer will be altered */
tif->tif_postdecode( tif, (uint8*) data, cc );
if (!isFillOrder(tif, td->td_fillorder) &&
(tif->tif_flags & TIFF_NOBITREV) == 0)
TIFFReverseBits((uint8*) data, cc);
if (cc > 0 &&
!TIFFAppendToStrip(tif, strip, (uint8*) data, cc))
return ((tmsize_t) -1);
return (cc);
}
sample = (uint16)(strip / td->td_stripsperimage);
if (!(*tif->tif_preencode)(tif, sample))
return ((tmsize_t) -1);
/* swab if needed - note that source buffer will be altered */
tif->tif_postdecode( tif, (uint8*) data, cc );
if (!(*tif->tif_encodestrip)(tif, (uint8*) data, cc, sample))
return ((tmsize_t) -1);
if (!(*tif->tif_postencode)(tif))
return ((tmsize_t) -1);
if (!isFillOrder(tif, td->td_fillorder) &&
(tif->tif_flags & TIFF_NOBITREV) == 0)
TIFFReverseBits(tif->tif_rawdata, tif->tif_rawcc);
if (tif->tif_rawcc > 0 &&
!TIFFAppendToStrip(tif, strip, tif->tif_rawdata, tif->tif_rawcc))
return ((tmsize_t) -1);
tif->tif_rawcc = 0;
tif->tif_rawcp = tif->tif_rawdata;
return (cc);
}
/*
* Encode the supplied data and write it to the
* specified strip.
*
* NB: Image length must be setup before writing.
*/
tsize_t
TIFFWriteEncodedStrip(TIFF* tif, tstrip_t strip, tdata_t data, tsize_t cc)
{
static const char module[] = "TIFFWriteEncodedStrip";
TIFFDirectory *td = &tif->tif_dir;
tsample_t sample;
if (!WRITECHECKSTRIPS(tif, module))
return ((tsize_t) -1);
/*
* Check strip array to make sure there's space.
* We don't support dynamically growing files that
* have data organized in separate bitplanes because
* it's too painful. In that case we require that
* the imagelength be set properly before the first
* write (so that the strips array will be fully
* allocated above).
*/
if (strip >= td->td_nstrips) {
if (td->td_planarconfig == PLANARCONFIG_SEPARATE) {
TIFFErrorExt(tif->tif_clientdata, tif->tif_name,
"Can not grow image by strips when using separate planes");
return ((tsize_t) -1);
}
if (!TIFFGrowStrips(tif, 1, module))
return ((tsize_t) -1);
td->td_stripsperimage =
TIFFhowmany(td->td_imagelength, td->td_rowsperstrip);
}
/*
* Handle delayed allocation of data buffer. This
* permits it to be sized according to the directory
* info.
*/
if (!BUFFERCHECK(tif))
return ((tsize_t) -1);
tif->tif_curstrip = strip;
tif->tif_row = (strip % td->td_stripsperimage) * td->td_rowsperstrip;
if ((tif->tif_flags & TIFF_CODERSETUP) == 0) {
if (!(*tif->tif_setupencode)(tif))
return ((tsize_t) -1);
tif->tif_flags |= TIFF_CODERSETUP;
}
tif->tif_rawcc = 0;
tif->tif_rawcp = tif->tif_rawdata;
if( td->td_stripbytecount[strip] > 0 )
{
/* Force TIFFAppendToStrip() to consider placing data at end
of file. */
tif->tif_curoff = 0;
}
tif->tif_flags &= ~TIFF_POSTENCODE;
sample = (tsample_t)(strip / td->td_stripsperimage);
if (!(*tif->tif_preencode)(tif, sample))
return ((tsize_t) -1);
/* swab if needed - note that source buffer will be altered */
tif->tif_postdecode( tif, (tidata_t) data, cc );
if (!(*tif->tif_encodestrip)(tif, (tidata_t) data, cc, sample))
return ((tsize_t) 0);
if (!(*tif->tif_postencode)(tif))
return ((tsize_t) -1);
if (!isFillOrder(tif, td->td_fillorder) &&
(tif->tif_flags & TIFF_NOBITREV) == 0)
TIFFReverseBits(tif->tif_rawdata, tif->tif_rawcc);
if (tif->tif_rawcc > 0 &&
!TIFFAppendToStrip(tif, strip, tif->tif_rawdata, tif->tif_rawcc))
return ((tsize_t) -1);
tif->tif_rawcc = 0;
tif->tif_rawcp = tif->tif_rawdata;
return (cc);
}
int
TIFFWriteScanline(TIFF* tif, tdata_t buf, uint32 row, tsample_t sample)
{
static const char module[] = "TIFFWriteScanline";
register TIFFDirectory *td;
int status, imagegrew = 0;
tstrip_t strip;
if (!WRITECHECKSTRIPS(tif, module))
return (-1);
/*
* Handle delayed allocation of data buffer. This
* permits it to be sized more intelligently (using
* directory information).
*/
if (!BUFFERCHECK(tif))
return (-1);
td = &tif->tif_dir;
/*
* Extend image length if needed
* (but only for PlanarConfig=1).
*/
if (row >= td->td_imagelength) { /* extend image */
if (td->td_planarconfig == PLANARCONFIG_SEPARATE) {
TIFFError(tif->tif_name,
"Can not change \"ImageLength\" when using separate planes");
return (-1);
}
td->td_imagelength = row+1;
imagegrew = 1;
}
/*
* Calculate strip and check for crossings.
*/
if (td->td_planarconfig == PLANARCONFIG_SEPARATE) {
if (sample >= td->td_samplesperpixel) {
TIFFError(tif->tif_name,
"%d: Sample out of range, max %d",
sample, td->td_samplesperpixel);
return (-1);
}
strip = sample*td->td_stripsperimage + row/td->td_rowsperstrip;
} else
strip = row / td->td_rowsperstrip;
if (strip != tif->tif_curstrip) {
/*
* Changing strips -- flush any data present.
*/
if (!TIFFFlushData(tif))
return (-1);
tif->tif_curstrip = strip;
/*
* Watch out for a growing image. The value of
* strips/image will initially be 1 (since it
* can't be deduced until the imagelength is known).
*/
if (strip >= td->td_stripsperimage && imagegrew)
td->td_stripsperimage =
TIFFhowmany(td->td_imagelength,td->td_rowsperstrip);
tif->tif_row =
(strip % td->td_stripsperimage) * td->td_rowsperstrip;
if ((tif->tif_flags & TIFF_CODERSETUP) == 0) {
if (!(*tif->tif_setupencode)(tif))
return (-1);
tif->tif_flags |= TIFF_CODERSETUP;
}
if (!(*tif->tif_preencode)(tif, sample))
return (-1);
tif->tif_flags |= TIFF_POSTENCODE;
}
/*
* Check strip array to make sure there's space.
* We don't support dynamically growing files that
* have data organized in separate bitplanes because
* it's too painful. In that case we require that
* the imagelength be set properly before the first
* write (so that the strips array will be fully
* allocated above).
*/
if (strip >= td->td_nstrips && !TIFFGrowStrips(tif, 1, module))
return (-1);
/*
* Ensure the write is either sequential or at the
* beginning of a strip (or that we can randomly
* access the data -- i.e. no encoding).
*/
if (row != tif->tif_row) {
if (row < tif->tif_row) {
/*
* Moving backwards within the same strip:
* backup to the start and then decode
* forward (below).
*/
tif->tif_row = (strip % td->td_stripsperimage) *
td->td_rowsperstrip;
tif->tif_rawcp = tif->tif_rawdata;
}
/*
* Seek forward to the desired row.
*/
if (!(*tif->tif_seek)(tif, row - tif->tif_row))
return (-1);
tif->tif_row = row;
}
status = (*tif->tif_encoderow)(tif, (tidata_t) buf,
tif->tif_scanlinesize, sample);
tif->tif_row++;
return (status);
}