static int igt_random_insert_remove(void *arg)
{
const u32 seqno_bias = 0x1000;
I915_RND_STATE(prng);
struct intel_engine_cs *engine = arg;
struct intel_wait *waiters;
const int count = 4096;
unsigned int *order;
unsigned long *bitmap;
int err = -ENOMEM;
int n;
mock_engine_reset(engine);
waiters = kvmalloc_array(count, sizeof(*waiters), GFP_KERNEL);
if (!waiters)
goto out_engines;
bitmap = kcalloc(DIV_ROUND_UP(count, BITS_PER_LONG), sizeof(*bitmap),
GFP_KERNEL);
if (!bitmap)
goto out_waiters;
order = i915_random_order(count, &prng);
if (!order)
goto out_bitmap;
for (n = 0; n < count; n++)
intel_wait_init_for_seqno(&waiters[n], seqno_bias + n);
err = check_rbtree(engine, bitmap, waiters, count);
if (err)
goto out_order;
/* Add and remove waiters into the rbtree in random order. At each
* step, we verify that the rbtree is correctly ordered.
*/
for (n = 0; n < count; n++) {
int i = order[n];
intel_engine_add_wait(engine, &waiters[i]);
__set_bit(i, bitmap);
err = check_rbtree(engine, bitmap, waiters, count);
if (err)
goto out_order;
}
i915_random_reorder(order, count, &prng);
for (n = 0; n < count; n++) {
int i = order[n];
intel_engine_remove_wait(engine, &waiters[i]);
__clear_bit(i, bitmap);
err = check_rbtree(engine, bitmap, waiters, count);
if (err)
goto out_order;
}
err = check_rbtree_empty(engine);
out_order:
kfree(order);
out_bitmap:
kfree(bitmap);
out_waiters:
kvfree(waiters);
out_engines:
mock_engine_flush(engine);
return err;
}
void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
{
unsigned int id, cpu = smp_processor_id();
unsigned long *map;
/* No lockless fast path .. yet */
spin_lock(&context_lock);
#ifndef DEBUG_STEAL_ONLY
pr_debug("[%d] activating context for mm @%p, active=%d, id=%d\n",
cpu, next, next->context.active, next->context.id);
#endif
#ifdef CONFIG_SMP
/* Mark us active and the previous one not anymore */
next->context.active++;
if (prev) {
#ifndef DEBUG_STEAL_ONLY
pr_debug(" old context %p active was: %d\n",
prev, prev->context.active);
#endif
WARN_ON(prev->context.active < 1);
prev->context.active--;
}
#endif /* CONFIG_SMP */
/* If we already have a valid assigned context, skip all that */
id = next->context.id;
if (likely(id != MMU_NO_CONTEXT))
goto ctxt_ok;
/* We really don't have a context, let's try to acquire one */
id = next_context;
if (id > last_context)
id = first_context;
map = context_map;
/* No more free contexts, let's try to steal one */
if (nr_free_contexts == 0) {
#ifdef CONFIG_SMP
if (num_online_cpus() > 1) {
id = steal_context_smp(id);
goto stolen;
}
#endif /* CONFIG_SMP */
id = steal_context_up(id);
goto stolen;
}
nr_free_contexts--;
/* We know there's at least one free context, try to find it */
while (__test_and_set_bit(id, map)) {
id = find_next_zero_bit(map, last_context+1, id);
if (id > last_context)
id = first_context;
}
stolen:
next_context = id + 1;
context_mm[id] = next;
next->context.id = id;
#ifndef DEBUG_STEAL_ONLY
pr_debug("[%d] picked up new id %d, nrf is now %d\n",
cpu, id, nr_free_contexts);
#endif
context_check_map();
ctxt_ok:
/* If that context got marked stale on this CPU, then flush the
* local TLB for it and unmark it before we use it
*/
if (test_bit(id, stale_map[cpu])) {
pr_debug("[%d] flushing stale context %d for mm @%p !\n",
cpu, id, next);
local_flush_tlb_mm(next);
/* XXX This clear should ultimately be part of local_flush_tlb_mm */
__clear_bit(id, stale_map[cpu]);
}
/* Flick the MMU and release lock */
set_context(id, next->pgd);
spin_unlock(&context_lock);
}
static int __devinit bfin_kpad_probe(struct platform_device *pdev)
{
struct bf54x_kpad *bf54x_kpad;
struct bfin_kpad_platform_data *pdata = pdev->dev.platform_data;
struct input_dev *input;
int i, error;
if (!pdata->rows || !pdata->cols || !pdata->keymap) {
printk(KERN_ERR DRV_NAME
": No rows, cols or keymap from pdata\n");
return -EINVAL;
}
if (!pdata->keymapsize ||
pdata->keymapsize > (pdata->rows * pdata->cols)) {
printk(KERN_ERR DRV_NAME ": Invalid keymapsize\n");
return -EINVAL;
}
bf54x_kpad = kzalloc(sizeof(struct bf54x_kpad), GFP_KERNEL);
if (!bf54x_kpad)
return -ENOMEM;
platform_set_drvdata(pdev, bf54x_kpad);
/* Allocate memory for keymap followed by private LUT */
bf54x_kpad->keycode = kmalloc(pdata->keymapsize *
sizeof(unsigned short) * 2, GFP_KERNEL);
if (!bf54x_kpad->keycode) {
error = -ENOMEM;
goto out;
}
if (!pdata->debounce_time || !pdata->debounce_time > MAX_MULT ||
!pdata->coldrive_time || !pdata->coldrive_time > MAX_MULT) {
printk(KERN_ERR DRV_NAME
": Invalid Debounce/Columdrive Time from pdata\n");
bfin_write_KPAD_MSEL(0xFF0); /* Default MSEL */
} else {
bfin_write_KPAD_MSEL(
((pdata->debounce_time / TIME_SCALE)
& DBON_SCALE) |
(((pdata->coldrive_time / TIME_SCALE) << 8)
& COLDRV_SCALE));
}
if (!pdata->keyup_test_interval)
bf54x_kpad->keyup_test_jiffies = msecs_to_jiffies(50);
else
bf54x_kpad->keyup_test_jiffies =
msecs_to_jiffies(pdata->keyup_test_interval);
if (peripheral_request_list((u16 *)&per_rows[MAX_RC - pdata->rows],
DRV_NAME)) {
printk(KERN_ERR DRV_NAME
": Requesting Peripherals failed\n");
error = -EFAULT;
goto out0;
}
if (peripheral_request_list((u16 *)&per_cols[MAX_RC - pdata->cols],
DRV_NAME)) {
printk(KERN_ERR DRV_NAME
": Requesting Peripherals failed\n");
error = -EFAULT;
goto out1;
}
bf54x_kpad->irq = platform_get_irq(pdev, 0);
if (bf54x_kpad->irq < 0) {
error = -ENODEV;
goto out2;
}
error = request_irq(bf54x_kpad->irq, bfin_kpad_isr,
IRQF_SAMPLE_RANDOM, DRV_NAME, pdev);
if (error) {
printk(KERN_ERR DRV_NAME
": unable to claim irq %d; error %d\n",
bf54x_kpad->irq, error);
goto out2;
}
input = input_allocate_device();
if (!input) {
error = -ENOMEM;
goto out3;
}
bf54x_kpad->input = input;
input->name = pdev->name;
input->phys = "bf54x-keys/input0";
input->dev.parent = &pdev->dev;
input_set_drvdata(input, bf54x_kpad);
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
input->keycodesize = sizeof(unsigned short);
input->keycodemax = pdata->keymapsize;
input->keycode = bf54x_kpad->keycode;
bfin_keycodecpy(bf54x_kpad->keycode, pdata->keymap, pdata->keymapsize);
/* setup input device */
__set_bit(EV_KEY, input->evbit);
if (pdata->repeat)
__set_bit(EV_REP, input->evbit);
for (i = 0; i < input->keycodemax; i++)
__set_bit(bf54x_kpad->keycode[i] & KEY_MAX, input->keybit);
__clear_bit(KEY_RESERVED, input->keybit);
error = input_register_device(input);
if (error) {
printk(KERN_ERR DRV_NAME
": Unable to register input device (%d)\n", error);
goto out4;
}
/* Init Keypad Key Up/Release test timer */
setup_timer(&bf54x_kpad->timer, bfin_kpad_timer, (unsigned long) pdev);
bfin_write_KPAD_PRESCALE(bfin_kpad_get_prescale(TIME_SCALE));
bfin_write_KPAD_CTL((((pdata->cols - 1) << 13) & KPAD_COLEN) |
(((pdata->rows - 1) << 10) & KPAD_ROWEN) |
(2 & KPAD_IRQMODE));
bfin_write_KPAD_CTL(bfin_read_KPAD_CTL() | KPAD_EN);
printk(KERN_ERR DRV_NAME
": Blackfin BF54x Keypad registered IRQ %d\n", bf54x_kpad->irq);
return 0;
out4:
input_free_device(input);
out3:
free_irq(bf54x_kpad->irq, pdev);
out2:
peripheral_free_list((u16 *)&per_cols[MAX_RC - pdata->cols]);
out1:
peripheral_free_list((u16 *)&per_rows[MAX_RC - pdata->rows]);
out0:
kfree(bf54x_kpad->keycode);
out:
kfree(bf54x_kpad);
platform_set_drvdata(pdev, NULL);
return error;
}
static inline void clear_page_attr(struct bitmap *bitmap, struct page *page,
enum bitmap_page_attr attr)
{
__clear_bit((page->index<<2) + attr, bitmap->filemap_attr);
}
static inline void clear_page_poison(struct page *page)
{
__clear_bit(PAGE_DEBUG_FLAG_POISON, &page->debug_flags);
}
static int __devinit adp5520_keys_probe(struct platform_device *pdev)
{
struct adp5520_keys_platform_data *pdata = pdev->dev.platform_data;
struct input_dev *input;
struct adp5520_keys *dev;
int ret, i;
unsigned char en_mask, ctl_mask = 0;
if (pdev->id != ID_ADP5520) {
dev_err(&pdev->dev, "only ADP5520 supports Keypad\n");
return -EINVAL;
}
if (pdata == NULL) {
dev_err(&pdev->dev, "missing platform data\n");
return -EINVAL;
}
if (!(pdata->rows_en_mask && pdata->cols_en_mask))
return -EINVAL;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
dev_err(&pdev->dev, "failed to alloc memory\n");
return -ENOMEM;
}
input = input_allocate_device();
if (!input) {
ret = -ENOMEM;
goto err;
}
dev->master = pdev->dev.parent;
dev->input = input;
input->name = pdev->name;
input->phys = "adp5520-keys/input0";
input->dev.parent = &pdev->dev;
input_set_drvdata(input, dev);
input->id.bustype = BUS_I2C;
input->id.vendor = 0x0001;
input->id.product = 0x5520;
input->id.version = 0x0001;
input->keycodesize = sizeof(dev->keycode[0]);
input->keycodemax = pdata->keymapsize;
input->keycode = dev->keycode;
memcpy(dev->keycode, pdata->keymap,
pdata->keymapsize * input->keycodesize);
/* setup input device */
__set_bit(EV_KEY, input->evbit);
if (pdata->repeat)
__set_bit(EV_REP, input->evbit);
for (i = 0; i < input->keycodemax; i++)
__set_bit(dev->keycode[i], input->keybit);
__clear_bit(KEY_RESERVED, input->keybit);
ret = input_register_device(input);
if (ret) {
dev_err(&pdev->dev, "unable to register input device\n");
goto err;
}
en_mask = pdata->rows_en_mask | pdata->cols_en_mask;
ret = adp5520_set_bits(dev->master, ADP5520_GPIO_CFG_1, en_mask);
if (en_mask & ADP5520_COL_C3)
ctl_mask |= ADP5520_C3_MODE;
if (en_mask & ADP5520_ROW_R3)
ctl_mask |= ADP5520_R3_MODE;
if (ctl_mask)
ret |= adp5520_set_bits(dev->master, ADP5520_LED_CONTROL,
ctl_mask);
ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_PULLUP,
pdata->rows_en_mask);
if (ret) {
dev_err(&pdev->dev, "failed to write\n");
ret = -EIO;
goto err1;
}
dev->notifier.notifier_call = adp5520_keys_notifier;
ret = adp5520_register_notifier(dev->master, &dev->notifier,
ADP5520_KP_IEN | ADP5520_KR_IEN);
if (ret) {
dev_err(&pdev->dev, "failed to register notifier\n");
goto err1;
}
platform_set_drvdata(pdev, dev);
return 0;
err1:
input_unregister_device(input);
input = NULL;
err:
input_free_device(input);
kfree(dev);
return ret;
}
static inline void gred_disable_rio_mode(struct gred_sched *table)
{
__clear_bit(GRED_RIO_MODE, &table->flags);
}
static int pm8058_kp_config_drv(int gpio_start, int num_gpios)
{
int rc;
struct pm8058_gpio kypd_drv = {
.direction = PM_GPIO_DIR_OUT,
.output_buffer = PM_GPIO_OUT_BUF_OPEN_DRAIN,
.output_value = 0,
.pull = PM_GPIO_PULL_NO,
.vin_sel = 2,
.out_strength = PM_GPIO_STRENGTH_LOW,
.function = PM_GPIO_FUNC_1,
.inv_int_pol = 1,
};
if (gpio_start < 0 || num_gpios < 0 || num_gpios > PM8058_GPIOS)
return -EINVAL;
while (num_gpios--) {
rc = pm8058_gpio_config(gpio_start++, &kypd_drv);
if (rc) {
pr_err("%s: FAIL pm8058_gpio_config(): rc=%d.\n",
__func__, rc);
return rc;
}
}
return 0;
}
static int pm8058_kp_config_sns(int gpio_start, int num_gpios)
{
int rc;
struct pm8058_gpio kypd_sns = {
.direction = PM_GPIO_DIR_IN,
.pull = PM_GPIO_PULL_UP_31P5,
.vin_sel = 2,
.out_strength = PM_GPIO_STRENGTH_NO,
.function = PM_GPIO_FUNC_NORMAL,
.inv_int_pol = 1,
};
if (gpio_start < 0 || num_gpios < 0 || num_gpios > PM8058_GPIOS)
return -EINVAL;
while (num_gpios--) {
rc = pm8058_gpio_config(gpio_start++, &kypd_sns);
if (rc) {
pr_err("%s: FAIL pm8058_gpio_config(): rc=%d.\n",
__func__, rc);
return rc;
}
}
return 0;
}
static int __devinit pmic8058_kp_probe(struct platform_device *pdev)
{
struct pmic8058_keypad_data *pdata = pdev->dev.platform_data;
struct pmic8058_kp *kp;
int rc, i;
unsigned short *keycodes;
u8 ctrl_val;
struct pm8058_chip *pm_chip;
pm_chip = platform_get_drvdata(pdev);
if (pm_chip == NULL) {
dev_err(&pdev->dev, "no parent data passed in\n");
return -EFAULT;
}
if (!pdata || !pdata->num_cols || !pdata->num_rows ||
pdata->num_cols > MATRIX_MAX_COLS ||
pdata->num_rows > MATRIX_MAX_ROWS ||
pdata->num_cols < MATRIX_MIN_COLS ||
pdata->num_rows < MATRIX_MIN_ROWS ||
!pdata->keymap) {
dev_err(&pdev->dev, "invalid platform data\n");
return -EINVAL;
}
if (pdata->rows_gpio_start < 0 || pdata->cols_gpio_start < 0) {
dev_err(&pdev->dev, "invalid gpio_start platform data\n");
return -EINVAL;
}
if (!pdata->scan_delay_ms || pdata->scan_delay_ms > MAX_SCAN_DELAY
|| pdata->scan_delay_ms < MIN_SCAN_DELAY ||
!is_power_of_2(pdata->scan_delay_ms)) {
dev_err(&pdev->dev, "invalid keypad scan time supplied\n");
return -EINVAL;
}
if (!pdata->row_hold_ns || pdata->row_hold_ns > MAX_ROW_HOLD_DELAY
|| pdata->row_hold_ns < MIN_ROW_HOLD_DELAY ||
((pdata->row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) {
dev_err(&pdev->dev, "invalid keypad row hold time supplied\n");
return -EINVAL;
}
if (pm8058_rev(pm_chip) == PM_8058_REV_1p0) {
if (!pdata->debounce_ms
|| !is_power_of_2(pdata->debounce_ms[0])
|| pdata->debounce_ms[0] > MAX_DEBOUNCE_A0_TIME
|| pdata->debounce_ms[0] < MIN_DEBOUNCE_A0_TIME) {
dev_err(&pdev->dev, "invalid debounce time supplied\n");
return -EINVAL;
}
} else {
if (!pdata->debounce_ms
|| ((pdata->debounce_ms[1] % 5) != 0)
|| pdata->debounce_ms[1] > MAX_DEBOUNCE_B0_TIME
|| pdata->debounce_ms[1] < MIN_DEBOUNCE_B0_TIME) {
dev_err(&pdev->dev, "invalid debounce time supplied\n");
return -EINVAL;
}
}
kp = kzalloc(sizeof(*kp), GFP_KERNEL);
if (!kp)
return -ENOMEM;
keycodes = kzalloc(MATRIX_MAX_SIZE * sizeof(keycodes), GFP_KERNEL);
if (!keycodes) {
rc = -ENOMEM;
goto err_alloc_mem;
}
platform_set_drvdata(pdev, kp);
kp->pdata = pdata;
kp->dev = &pdev->dev;
kp->keycodes = keycodes;
kp->pm_chip = pm_chip;
if (pm8058_rev(pm_chip) == PM_8058_REV_1p0)
kp->flags |= KEYF_FIX_LAST_ROW;
kp->input = input_allocate_device();
if (!kp->input) {
dev_err(&pdev->dev, "unable to allocate input device\n");
rc = -ENOMEM;
goto err_alloc_device;
}
kp->key_sense_irq = platform_get_irq(pdev, 0);
if (kp->key_sense_irq < 0) {
dev_err(&pdev->dev, "unable to get keypad sense irq\n");
rc = -ENXIO;
goto err_get_irq;
}
kp->key_stuck_irq = platform_get_irq(pdev, 1);
if (kp->key_stuck_irq < 0) {
dev_err(&pdev->dev, "unable to get keypad stuck irq\n");
rc = -ENXIO;
goto err_get_irq;
}
if (pdata->input_name)
kp->input->name = pdata->input_name;
else
kp->input->name = "PMIC8058 keypad";
if (pdata->input_phys_device)
kp->input->phys = pdata->input_phys_device;
else
kp->input->phys = "pmic8058_keypad/input0";
kp->input->dev.parent = &pdev->dev;
kp->input->id.bustype = BUS_HOST;
kp->input->id.version = 0x0001;
kp->input->id.product = 0x0001;
kp->input->id.vendor = 0x0001;
kp->input->evbit[0] = BIT_MASK(EV_KEY);
if (pdata->rep)
__set_bit(EV_REP, kp->input->evbit);
kp->input->keycode = keycodes;
kp->input->keycodemax = MATRIX_MAX_SIZE;
kp->input->keycodesize = sizeof(*keycodes);
for (i = 0; i < pdata->keymap_size; i++) {
unsigned int row = KEY_ROW(pdata->keymap[i]);
unsigned int col = KEY_COL(pdata->keymap[i]);
unsigned short keycode = KEY_VAL(pdata->keymap[i]);
keycodes[(row << 3) + col] = keycode;
__set_bit(keycode, kp->input->keybit);
}
__clear_bit(KEY_RESERVED, kp->input->keybit);
input_set_capability(kp->input, EV_MSC, MSC_SCAN);
input_set_drvdata(kp->input, kp);
rc = input_register_device(kp->input);
if (rc < 0) {
dev_err(&pdev->dev, "unable to register keypad input device\n");
goto err_get_irq;
}
memset(kp->keystate, 0xff, sizeof(kp->keystate));
memset(kp->stuckstate, 0xff, sizeof(kp->stuckstate));
rc = pmic8058_kpd_init(kp);
if (rc < 0) {
dev_err(&pdev->dev, "unable to initialize keypad controller\n");
goto err_kpd_init;
}
rc = pm8058_kp_config_sns(pdata->cols_gpio_start,
pdata->num_cols);
if (rc < 0) {
dev_err(&pdev->dev, "unable to configure keypad sense lines\n");
goto err_gpio_config;
}
rc = pm8058_kp_config_drv(pdata->rows_gpio_start,
pdata->num_rows);
if (rc < 0) {
dev_err(&pdev->dev, "unable to configure keypad drive lines\n");
goto err_gpio_config;
}
rc = request_irq(kp->key_sense_irq, pmic8058_kp_irq,
IRQF_TRIGGER_RISING, "pmic-keypad", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request keypad sense irq\n");
goto err_req_sense_irq;
}
rc = request_irq(kp->key_stuck_irq, pmic8058_kp_stuck_irq,
IRQF_TRIGGER_RISING, "pmic-keypad-stuck", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request keypad stuck irq\n");
goto err_req_stuck_irq;
}
rc = pmic8058_kp_read(kp, &ctrl_val, KEYP_CTRL, 1);
ctrl_val |= KEYP_CTRL_KEYP_EN;
rc = pmic8058_kp_write_u8(kp, ctrl_val, KEYP_CTRL);
__dump_kp_regs(kp, "probe");
device_init_wakeup(&pdev->dev, pdata->wakeup);
return 0;
err_req_stuck_irq:
free_irq(kp->key_sense_irq, NULL);
err_req_sense_irq:
err_gpio_config:
err_kpd_init:
input_unregister_device(kp->input);
kp->input = NULL;
err_get_irq:
input_free_device(kp->input);
err_alloc_device:
kfree(keycodes);
err_alloc_mem:
kfree(kp);
return rc;
}
static int __devexit pmic8058_kp_remove(struct platform_device *pdev)
{
struct pmic8058_kp *kp = platform_get_drvdata(pdev);
device_init_wakeup(&pdev->dev, 0);
free_irq(kp->key_stuck_irq, NULL);
free_irq(kp->key_sense_irq, NULL);
input_unregister_device(kp->input);
platform_set_drvdata(pdev, NULL);
kfree(kp->input->keycode);
kfree(kp);
return 0;
}
static struct platform_driver pmic8058_kp_driver = {
.probe = pmic8058_kp_probe,
.remove = __devexit_p(pmic8058_kp_remove),
.driver = {
.name = "pm8058-keypad",
.owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &pm8058_kp_pm_ops,
#endif
},
};
static int __init pmic8058_kp_init(void)
{
return platform_driver_register(&pmic8058_kp_driver);
}
module_init(pmic8058_kp_init);
static void __exit pmic8058_kp_exit(void)
{
platform_driver_unregister(&pmic8058_kp_driver);
}
static inline void dealloc_channel(struct firedtv *fdtv, int i)
{
__clear_bit(i, &fdtv->channel_active);
}
static int cap1106_i2c_probe(struct i2c_client *i2c_client,
const struct i2c_device_id *id)
{
struct device *dev = &i2c_client->dev;
struct cap1106_priv *priv;
struct device_node *node;
int i, error, irq, gain = 0;
unsigned int val, rev;
u32 gain32, keycodes[CAP1106_NUM_CHN];
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->regmap = devm_regmap_init_i2c(i2c_client, &cap1106_regmap_config);
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
error = regmap_read(priv->regmap, CAP1106_REG_PRODUCT_ID, &val);
if (error)
return error;
if (val != CAP1106_PRODUCT_ID) {
dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n",
val, CAP1106_PRODUCT_ID);
return -ENODEV;
}
error = regmap_read(priv->regmap, CAP1106_REG_MANUFACTURER_ID, &val);
if (error)
return error;
if (val != CAP1106_MANUFACTURER_ID) {
dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n",
val, CAP1106_MANUFACTURER_ID);
return -ENODEV;
}
error = regmap_read(priv->regmap, CAP1106_REG_REVISION, &rev);
if (error < 0)
return error;
dev_info(dev, "CAP1106 detected, revision 0x%02x\n", rev);
i2c_set_clientdata(i2c_client, priv);
node = dev->of_node;
if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
if (is_power_of_2(gain32) && gain32 <= 8)
gain = ilog2(gain32);
else
dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
}
BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes));
/* Provide some useful defaults */
for (i = 0; i < ARRAY_SIZE(keycodes); i++)
keycodes[i] = KEY_A + i;
of_property_read_u32_array(node, "linux,keycodes",
keycodes, ARRAY_SIZE(keycodes));
for (i = 0; i < ARRAY_SIZE(keycodes); i++)
priv->keycodes[i] = keycodes[i];
error = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL,
CAP1106_REG_MAIN_CONTROL_GAIN_MASK,
gain << CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT);
if (error)
return error;
/* Disable autorepeat. The Linux input system has its own handling. */
error = regmap_write(priv->regmap, CAP1106_REG_REPEAT_RATE, 0);
if (error)
return error;
priv->idev = devm_input_allocate_device(dev);
if (!priv->idev)
return -ENOMEM;
priv->idev->name = "CAP1106 capacitive touch sensor";
priv->idev->id.bustype = BUS_I2C;
priv->idev->evbit[0] = BIT_MASK(EV_KEY);
if (of_property_read_bool(node, "autorepeat"))
__set_bit(EV_REP, priv->idev->evbit);
for (i = 0; i < CAP1106_NUM_CHN; i++)
__set_bit(priv->keycodes[i], priv->idev->keybit);
__clear_bit(KEY_RESERVED, priv->idev->keybit);
priv->idev->keycode = priv->keycodes;
priv->idev->keycodesize = sizeof(priv->keycodes[0]);
priv->idev->keycodemax = ARRAY_SIZE(priv->keycodes);
priv->idev->id.vendor = CAP1106_MANUFACTURER_ID;
priv->idev->id.product = CAP1106_PRODUCT_ID;
priv->idev->id.version = rev;
priv->idev->open = cap1106_input_open;
priv->idev->close = cap1106_input_close;
input_set_drvdata(priv->idev, priv);
/*
* Put the device in deep sleep mode for now.
* ->open() will bring it back once the it is actually needed.
*/
cap1106_set_sleep(priv, true);
error = input_register_device(priv->idev);
if (error)
return error;
irq = irq_of_parse_and_map(node, 0);
if (!irq) {
dev_err(dev, "Unable to parse or map IRQ\n");
return -ENXIO;
}
error = devm_request_threaded_irq(dev, irq, NULL, cap1106_thread_func,
IRQF_ONESHOT, dev_name(dev), priv);
if (error)
return error;
return 0;
}
static int opencores_kbd_probe(struct platform_device *pdev)
{
struct input_dev *input;
struct opencores_kbd *opencores_kbd;
struct resource *res;
int irq, i, error;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "missing board memory resource\n");
return -EINVAL;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "missing board IRQ resource\n");
return -EINVAL;
}
opencores_kbd = kzalloc(sizeof(*opencores_kbd), GFP_KERNEL);
input = input_allocate_device();
if (!opencores_kbd || !input) {
dev_err(&pdev->dev, "failed to allocate device structures\n");
error = -ENOMEM;
goto err_free_mem;
}
opencores_kbd->addr_res = res;
res = request_mem_region(res->start, resource_size(res), pdev->name);
if (!res) {
dev_err(&pdev->dev, "failed to request I/O memory\n");
error = -EBUSY;
goto err_free_mem;
}
opencores_kbd->addr = ioremap(res->start, resource_size(res));
if (!opencores_kbd->addr) {
dev_err(&pdev->dev, "failed to remap I/O memory\n");
error = -ENXIO;
goto err_rel_mem;
}
opencores_kbd->input = input;
opencores_kbd->irq = irq;
input->name = pdev->name;
input->phys = "opencores-kbd/input0";
input->dev.parent = &pdev->dev;
input_set_drvdata(input, opencores_kbd);
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
input->keycode = opencores_kbd->keycodes;
input->keycodesize = sizeof(opencores_kbd->keycodes[0]);
input->keycodemax = ARRAY_SIZE(opencores_kbd->keycodes);
__set_bit(EV_KEY, input->evbit);
for (i = 0; i < ARRAY_SIZE(opencores_kbd->keycodes); i++) {
/*
* OpenCores controller happens to have scancodes match
* our KEY_* definitions.
*/
opencores_kbd->keycodes[i] = i;
__set_bit(opencores_kbd->keycodes[i], input->keybit);
}
__clear_bit(KEY_RESERVED, input->keybit);
error = request_irq(irq, &opencores_kbd_isr,
IRQF_TRIGGER_RISING, pdev->name, opencores_kbd);
if (error) {
dev_err(&pdev->dev, "unable to claim irq %d\n", irq);
goto err_unmap_mem;
}
error = input_register_device(input);
if (error) {
dev_err(&pdev->dev, "unable to register input device\n");
goto err_free_irq;
}
platform_set_drvdata(pdev, opencores_kbd);
return 0;
err_free_irq:
free_irq(irq, opencores_kbd);
err_unmap_mem:
iounmap(opencores_kbd->addr);
err_rel_mem:
release_mem_region(res->start, resource_size(res));
err_free_mem:
input_free_device(input);
kfree(opencores_kbd);
return error;
}
void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
{
unsigned int i, id, cpu = smp_processor_id();
unsigned long *map;
raw_spin_lock(&context_lock);
pr_hard("[%d] activating context for mm @%p, active=%d, id=%d",
cpu, next, next->context.active, next->context.id);
#ifdef CONFIG_SMP
next->context.active++;
if (prev) {
pr_hardcont(" (old=0x%p a=%d)", prev, prev->context.active);
WARN_ON(prev->context.active < 1);
prev->context.active--;
}
again:
#endif
id = next->context.id;
if (likely(id != MMU_NO_CONTEXT)) {
#ifdef DEBUG_MAP_CONSISTENCY
if (context_mm[id] != next)
pr_err("MMU: mm 0x%p has id %d but context_mm[%d] says 0x%p\n",
next, id, id, context_mm[id]);
#endif
goto ctxt_ok;
}
id = next_context;
if (id > last_context)
id = first_context;
map = context_map;
if (nr_free_contexts == 0) {
#ifdef CONFIG_SMP
if (num_online_cpus() > 1) {
id = steal_context_smp(id);
if (id == MMU_NO_CONTEXT)
goto again;
goto stolen;
}
#endif
id = steal_context_up(id);
goto stolen;
}
nr_free_contexts--;
while (__test_and_set_bit(id, map)) {
id = find_next_zero_bit(map, last_context+1, id);
if (id > last_context)
id = first_context;
}
stolen:
next_context = id + 1;
context_mm[id] = next;
next->context.id = id;
pr_hardcont(" | new id=%d,nrf=%d", id, nr_free_contexts);
context_check_map();
ctxt_ok:
if (test_bit(id, stale_map[cpu])) {
pr_hardcont(" | stale flush %d [%d..%d]",
id, cpu_first_thread_sibling(cpu),
cpu_last_thread_sibling(cpu));
local_flush_tlb_mm(next);
for (i = cpu_first_thread_sibling(cpu);
i <= cpu_last_thread_sibling(cpu); i++) {
__clear_bit(id, stale_map[i]);
}
}
pr_hardcont(" -> %d\n", id);
set_context(id, next->pgd);
raw_spin_unlock(&context_lock);
}
/*
* keypad controller should be initialized in the following sequence
* only, otherwise it might get into FSM stuck state.
*
* - Initialize keypad control parameters, like no. of rows, columns,
* timing values etc.,
* - configure rows and column gpios pull up/down.
* - set irq edge type.
* - enable the keypad controller.
*/
static int __devinit pmic8058_kp_probe(struct platform_device *pdev)
{
struct pmic8058_keypad_data *pdata = pdev->dev.platform_data;
struct pmic8058_kp *kp;
int rc, i;
unsigned short *keycodes;
u8 ctrl_val;
if (!pdata || !pdata->num_cols || !pdata->num_rows ||
pdata->num_cols > MATRIX_MAX_COLS ||
pdata->num_rows > MATRIX_MAX_ROWS ||
!pdata->keymap) {
dev_err(&pdev->dev, "invalid platform data\n");
return -EINVAL;
}
if (pdata->rows_gpio_start < 0 || pdata->cols_gpio_start < 0) {
dev_err(&pdev->dev, "invalid gpio_start platform data\n");
return -EINVAL;
}
if (!pdata->scan_delay_ms || pdata->scan_delay_ms > MAX_SCAN_DELAY
|| pdata->scan_delay_ms < MIN_SCAN_DELAY ||
!is_power_of_2(pdata->scan_delay_ms)) {
dev_err(&pdev->dev, "invalid keypad scan time supplied\n");
return -EINVAL;
}
rc = pm8058_read(PM8058_REV, &rev, 1);
pr_info("PMIC4 is at %X revision\n", rev);
if (rev == PMIC8058_REV_A0) {
if (!pdata->debounce_ms || !is_power_of_2(pdata->debounce_ms)
|| pdata->debounce_ms > MAX_DEBOUNCE_A0_TIME
|| pdata->debounce_ms < MIN_DEBOUNCE_A0_TIME) {
dev_err(&pdev->dev, "invalid debounce time supplied\n");
return -EINVAL;
}
} else {
if (!pdata->debounce_ms || ((pdata->debounce_ms % 5) != 0)
|| pdata->debounce_ms > MAX_DEBOUNCE_B0_TIME
|| pdata->debounce_ms < MIN_DEBOUNCE_B0_TIME) {
dev_err(&pdev->dev, "invalid debounce time supplied\n");
return -EINVAL;
}
}
kp = kzalloc(sizeof(*kp), GFP_KERNEL);
if (!kp)
return -ENOMEM;
keycodes = kzalloc(MATRIX_MAX_SIZE * sizeof(keycodes), GFP_KERNEL);
if (!keycodes) {
rc = -ENOMEM;
goto err_alloc_mem;
}
platform_set_drvdata(pdev, kp);
kp->pdata = pdata;
kp->dev = &pdev->dev;
kp->keycodes = keycodes;
/* REVISIT: actual revision with the fix */
if (rev <= PMIC8058_REV_B0)
kp->flags |= KEYF_FIX_LAST_ROW;
kp->input = input_allocate_device();
if (!kp->input) {
dev_err(&pdev->dev, "unable to allocate input device\n");
rc = -ENOMEM;
goto err_alloc_device;
}
kp->key_sense_irq = platform_get_irq(pdev, 0);
if (kp->key_sense_irq < 0) {
dev_err(&pdev->dev, "unable to get keypad sense irq\n");
rc = -ENXIO;
goto err_get_irq;
}
kp->key_stuck_irq = platform_get_irq(pdev, 1);
if (kp->key_stuck_irq < 0) {
dev_err(&pdev->dev, "unable to get keypad stuck irq\n");
rc = -ENXIO;
goto err_get_irq;
}
if (pdata->input_name)
kp->input->name = pdata->input_name;
else
kp->input->name = "PMIC8058 keypad";
if (pdata->input_phys_device)
kp->input->phys = pdata->input_phys_device;
else
kp->input->phys = "pmic8058_keypad/input0";
kp->input->dev.parent = &pdev->dev;
kp->input->id.bustype = BUS_HOST;
kp->input->id.version = 0x0001;
kp->input->id.product = 0x0001;
kp->input->id.vendor = 0x0001;
kp->input->evbit[0] = BIT_MASK(EV_KEY);
if (pdata->rep)
__set_bit(EV_REP, kp->input->evbit);
kp->input->keycode = keycodes;
kp->input->keycodemax = MATRIX_MAX_SIZE;
kp->input->keycodesize = sizeof(*keycodes);
/* build keycodes for faster scanning */
for (i = 0; i < pdata->keymap_size; i++) {
unsigned int row = KEY_ROW(pdata->keymap[i]);
unsigned int col = KEY_COL(pdata->keymap[i]);
unsigned short keycode = KEY_VAL(pdata->keymap[i]);
keycodes[(row << 3) + col] = keycode;
__set_bit(keycode, kp->input->keybit);
}
__clear_bit(KEY_RESERVED, kp->input->keybit);
input_set_capability(kp->input, EV_MSC, MSC_SCAN);
input_set_drvdata(kp->input, kp);
rc = input_register_device(kp->input);
if (rc < 0) {
dev_err(&pdev->dev, "unable to register keypad input device\n");
goto err_get_irq;
}
/* initialize keypad state */
memset(kp->keystate, 0xff, sizeof(kp->keystate));
rc = pmic8058_kpd_init(kp);
if (rc < 0) {
dev_err(&pdev->dev, "unable to initialize keypad controller\n");
goto err_kpd_init;
}
rc = pm8058_gpio_config_kypd_sns(pdata->cols_gpio_start,
pdata->num_cols);
if (rc < 0) {
dev_err(&pdev->dev, "unable to configure keypad sense lines\n");
goto err_gpio_config;
}
rc = pm8058_gpio_config_kypd_drv(pdata->rows_gpio_start,
pdata->num_rows);
if (rc < 0) {
dev_err(&pdev->dev, "unable to configure keypad drive lines\n");
goto err_gpio_config;
}
rc = request_irq(kp->key_sense_irq, pmic8058_kp_irq,
IRQF_TRIGGER_RISING, "pmic-keypad", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request keypad sense irq\n");
goto err_req_sense_irq;
}
rc = request_irq(kp->key_stuck_irq, pmic8058_kp_stuck_irq,
IRQF_TRIGGER_RISING, "pmic-keypad-stuck", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request keypad stuck irq\n");
goto err_req_stuck_irq;
}
rc = pmic8058_kp_read(kp, &ctrl_val, KEYP_CTRL, 1);
ctrl_val |= KEYP_CTRL_KEYP_EN;
rc = pmic8058_kp_write_u8(kp, ctrl_val, KEYP_CTRL);
__dump_kp_regs(kp, "probe");
device_init_wakeup(&pdev->dev, pdata->wakeup);
return 0;
err_req_stuck_irq:
free_irq(kp->key_sense_irq, NULL);
err_req_sense_irq:
err_gpio_config:
err_kpd_init:
input_unregister_device(kp->input);
kp->input = NULL;
err_get_irq:
input_free_device(kp->input);
err_alloc_device:
kfree(keycodes);
err_alloc_mem:
kfree(kp);
return rc;
}
static int igt_insert_complete(void *arg)
{
const u32 seqno_bias = 0x1000;
struct intel_engine_cs *engine = arg;
struct intel_wait *waiters;
const int count = 4096;
unsigned long *bitmap;
int err = -ENOMEM;
int n, m;
mock_engine_reset(engine);
waiters = kvmalloc_array(count, sizeof(*waiters), GFP_KERNEL);
if (!waiters)
goto out_engines;
bitmap = kcalloc(DIV_ROUND_UP(count, BITS_PER_LONG), sizeof(*bitmap),
GFP_KERNEL);
if (!bitmap)
goto out_waiters;
for (n = 0; n < count; n++) {
intel_wait_init_for_seqno(&waiters[n], n + seqno_bias);
intel_engine_add_wait(engine, &waiters[n]);
__set_bit(n, bitmap);
}
err = check_rbtree(engine, bitmap, waiters, count);
if (err)
goto out_bitmap;
/* On each step, we advance the seqno so that several waiters are then
* complete (we increase the seqno by increasingly larger values to
* retire more and more waiters at once). All retired waiters should
* be woken and removed from the rbtree, and so that we check.
*/
for (n = 0; n < count; n = m) {
int seqno = 2 * n;
GEM_BUG_ON(find_first_bit(bitmap, count) != n);
if (intel_wait_complete(&waiters[n])) {
pr_err("waiter[%d, seqno=%d] completed too early\n",
n, waiters[n].seqno);
err = -EINVAL;
goto out_bitmap;
}
/* complete the following waiters */
mock_seqno_advance(engine, seqno + seqno_bias);
for (m = n; m <= seqno; m++) {
if (m == count)
break;
GEM_BUG_ON(!test_bit(m, bitmap));
__clear_bit(m, bitmap);
}
intel_engine_remove_wait(engine, &waiters[n]);
RB_CLEAR_NODE(&waiters[n].node);
err = check_rbtree(engine, bitmap, waiters, count);
if (err) {
pr_err("rbtree corrupt after seqno advance to %d\n",
seqno + seqno_bias);
goto out_bitmap;
}
err = check_completion(engine, bitmap, waiters, count);
if (err) {
pr_err("completions after seqno advance to %d failed\n",
seqno + seqno_bias);
goto out_bitmap;
}
}
err = check_rbtree_empty(engine);
out_bitmap:
kfree(bitmap);
out_waiters:
kvfree(waiters);
out_engines:
mock_engine_flush(engine);
return err;
}
static void mlxsw_sp_acl_tcam_region_id_put(struct mlxsw_sp_acl_tcam *tcam,
u16 id)
{
__clear_bit(id, tcam->used_regions);
}
/*
* lkkbd_connect() probes for a LK keyboard and fills the necessary structures.
*/
static int lkkbd_connect(struct serio *serio, struct serio_driver *drv)
{
struct lkkbd *lk;
struct input_dev *input_dev;
int i;
int err;
lk = kzalloc(sizeof(struct lkkbd), GFP_KERNEL);
input_dev = input_allocate_device();
if (!lk || !input_dev) {
err = -ENOMEM;
goto fail1;
}
lk->serio = serio;
lk->dev = input_dev;
INIT_WORK(&lk->tq, lkkbd_reinit);
lk->bell_volume = bell_volume;
lk->keyclick_volume = keyclick_volume;
lk->ctrlclick_volume = ctrlclick_volume;
memcpy(lk->keycode, lkkbd_keycode, sizeof(lk->keycode));
strlcpy(lk->name, "DEC LK keyboard", sizeof(lk->name));
snprintf(lk->phys, sizeof(lk->phys), "%s/input0", serio->phys);
input_dev->name = lk->name;
input_dev->phys = lk->phys;
input_dev->id.bustype = BUS_RS232;
input_dev->id.vendor = SERIO_LKKBD;
input_dev->id.product = 0;
input_dev->id.version = 0x0100;
input_dev->dev.parent = &serio->dev;
input_dev->event = lkkbd_event;
input_set_drvdata(input_dev, lk);
__set_bit(EV_KEY, input_dev->evbit);
__set_bit(EV_LED, input_dev->evbit);
__set_bit(EV_SND, input_dev->evbit);
__set_bit(EV_REP, input_dev->evbit);
__set_bit(LED_CAPSL, input_dev->ledbit);
__set_bit(LED_SLEEP, input_dev->ledbit);
__set_bit(LED_COMPOSE, input_dev->ledbit);
__set_bit(LED_SCROLLL, input_dev->ledbit);
__set_bit(SND_BELL, input_dev->sndbit);
__set_bit(SND_CLICK, input_dev->sndbit);
input_dev->keycode = lk->keycode;
input_dev->keycodesize = sizeof(lk->keycode[0]);
input_dev->keycodemax = ARRAY_SIZE(lk->keycode);
for (i = 0; i < LK_NUM_KEYCODES; i++)
__set_bit(lk->keycode[i], input_dev->keybit);
__clear_bit(KEY_RESERVED, input_dev->keybit);
serio_set_drvdata(serio, lk);
err = serio_open(serio, drv);
if (err)
goto fail2;
err = input_register_device(lk->dev);
if (err)
goto fail3;
serio_write(lk->serio, LK_CMD_POWERCYCLE_RESET);
return 0;
fail3: serio_close(serio);
fail2: serio_set_drvdata(serio, NULL);
fail1: input_free_device(input_dev);
kfree(lk);
return err;
}
static void mlxsw_sp_acl_tcam_group_id_put(struct mlxsw_sp_acl_tcam *tcam,
u16 id)
{
__clear_bit(id, tcam->used_groups);
}
void __ipipe_enable_root_irqs_hw(void)
{
__clear_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
bfin_sti(bfin_irq_flags);
}
void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
{
unsigned int i, id, cpu = smp_processor_id();
unsigned long *map;
/* No lockless fast path .. yet */
raw_spin_lock(&context_lock);
pr_hard("[%d] activating context for mm @%p, active=%d, id=%d",
cpu, next, next->context.active, next->context.id);
#ifdef CONFIG_SMP
/* Mark us active and the previous one not anymore */
next->context.active++;
if (prev) {
pr_hardcont(" (old=0x%p a=%d)", prev, prev->context.active);
WARN_ON(prev->context.active < 1);
prev->context.active--;
}
again:
#endif /* CONFIG_SMP */
/* If we already have a valid assigned context, skip all that */
id = next->context.id;
if (likely(id != MMU_NO_CONTEXT)) {
#ifdef DEBUG_MAP_CONSISTENCY
if (context_mm[id] != next)
pr_err("MMU: mm 0x%p has id %d but context_mm[%d] says 0x%p\n",
next, id, id, context_mm[id]);
#endif
goto ctxt_ok;
}
/* We really don't have a context, let's try to acquire one */
id = next_context;
if (id > last_context)
id = first_context;
map = context_map;
/* No more free contexts, let's try to steal one */
if (nr_free_contexts == 0) {
#ifdef CONFIG_SMP
if (num_online_cpus() > 1) {
id = steal_context_smp(id);
if (id == MMU_NO_CONTEXT)
goto again;
goto stolen;
}
#endif /* CONFIG_SMP */
id = steal_context_up(id);
goto stolen;
}
nr_free_contexts--;
/* We know there's at least one free context, try to find it */
while (__test_and_set_bit(id, map)) {
id = find_next_zero_bit(map, last_context+1, id);
if (id > last_context)
id = first_context;
}
stolen:
next_context = id + 1;
context_mm[id] = next;
next->context.id = id;
pr_hardcont(" | new id=%d,nrf=%d", id, nr_free_contexts);
context_check_map();
ctxt_ok:
/* If that context got marked stale on this CPU, then flush the
* local TLB for it and unmark it before we use it
*/
if (test_bit(id, stale_map[cpu])) {
pr_hardcont(" | stale flush %d [%d..%d]",
id, cpu_first_thread_in_core(cpu),
cpu_last_thread_in_core(cpu));
local_flush_tlb_mm(next);
/* XXX This clear should ultimately be part of local_flush_tlb_mm */
for (i = cpu_first_thread_in_core(cpu);
i <= cpu_last_thread_in_core(cpu); i++) {
__clear_bit(id, stale_map[i]);
}
}
/* Flick the MMU and release lock */
pr_hardcont(" -> %d\n", id);
set_context(id, next->pgd);
raw_spin_unlock(&context_lock);
}
/*
* __ipipe_handle_irq() -- IPIPE's generic IRQ handler. An optimistic
* interrupt protection log is maintained here for each domain. Hw
* interrupts are masked on entry.
*/
void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
{
struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
struct ipipe_domain *this_domain, *next_domain;
struct list_head *head, *pos;
struct ipipe_irqdesc *idesc;
int m_ack, s = -1;
/*
* Software-triggered IRQs do not need any ack. The contents
* of the register frame should only be used when processing
* the timer interrupt, but not for handling any other
* interrupt.
*/
m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
this_domain = __ipipe_current_domain;
idesc = &this_domain->irqs[irq];
if (unlikely(test_bit(IPIPE_STICKY_FLAG, &idesc->control)))
head = &this_domain->p_link;
else {
head = __ipipe_pipeline.next;
next_domain = list_entry(head, struct ipipe_domain, p_link);
idesc = &next_domain->irqs[irq];
if (likely(test_bit(IPIPE_WIRED_FLAG, &idesc->control))) {
if (!m_ack && idesc->acknowledge != NULL)
idesc->acknowledge(irq, irq_to_desc(irq));
if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
s = __test_and_set_bit(IPIPE_STALL_FLAG,
&p->status);
__ipipe_dispatch_wired(next_domain, irq);
goto out;
}
}
/* Ack the interrupt. */
pos = head;
while (pos != &__ipipe_pipeline) {
next_domain = list_entry(pos, struct ipipe_domain, p_link);
idesc = &next_domain->irqs[irq];
if (test_bit(IPIPE_HANDLE_FLAG, &idesc->control)) {
__ipipe_set_irq_pending(next_domain, irq);
if (!m_ack && idesc->acknowledge != NULL) {
idesc->acknowledge(irq, irq_to_desc(irq));
m_ack = 1;
}
}
if (!test_bit(IPIPE_PASS_FLAG, &idesc->control))
break;
pos = next_domain->p_link.next;
}
/*
* Now walk the pipeline, yielding control to the highest
* priority domain that has pending interrupt(s) or
* immediately to the current domain if the interrupt has been
* marked as 'sticky'. This search does not go beyond the
* current domain in the pipeline. We also enforce the
* additional root stage lock (blackfin-specific).
*/
if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
/*
* If the interrupt preempted the head domain, then do not
* even try to walk the pipeline, unless an interrupt is
* pending for it.
*/
if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) &&
!__ipipe_ipending_p(ipipe_head_cpudom_ptr()))
goto out;
__ipipe_walk_pipeline(head);
out:
if (!s)
__clear_bit(IPIPE_STALL_FLAG, &p->status);
}
void rt2x00mac_sw_scan_complete(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
__clear_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags);
rt2x00link_start_tuner(rt2x00dev);
}
static int __devinit adp5588_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct adp5588_kpad *kpad;
const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
struct input_dev *input;
unsigned int revid;
int ret, i;
int error;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
return -EIO;
}
if (!pdata) {
dev_err(&client->dev, "no platform data?\n");
return -EINVAL;
}
if (!pdata->rows || !pdata->cols || !pdata->keymap) {
dev_err(&client->dev, "no rows, cols or keymap from pdata\n");
return -EINVAL;
}
if (pdata->keymapsize != ADP5588_KEYMAPSIZE) {
dev_err(&client->dev, "invalid keymapsize\n");
return -EINVAL;
}
if (!pdata->gpimap && pdata->gpimapsize) {
dev_err(&client->dev, "invalid gpimap from pdata\n");
return -EINVAL;
}
if (pdata->gpimapsize > ADP5588_GPIMAPSIZE_MAX) {
dev_err(&client->dev, "invalid gpimapsize\n");
return -EINVAL;
}
for (i = 0; i < pdata->gpimapsize; i++) {
unsigned short pin = pdata->gpimap[i].pin;
if (pin < GPI_PIN_BASE || pin > GPI_PIN_END) {
dev_err(&client->dev, "invalid gpi pin data\n");
return -EINVAL;
}
if (pin <= GPI_PIN_ROW_END) {
if (pin - GPI_PIN_ROW_BASE + 1 <= pdata->rows) {
dev_err(&client->dev, "invalid gpi row data\n");
return -EINVAL;
}
} else {
if (pin - GPI_PIN_COL_BASE + 1 <= pdata->cols) {
dev_err(&client->dev, "invalid gpi col data\n");
return -EINVAL;
}
}
}
if (!client->irq) {
dev_err(&client->dev, "no IRQ?\n");
return -EINVAL;
}
kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
input = input_allocate_device();
if (!kpad || !input) {
error = -ENOMEM;
goto err_free_mem;
}
kpad->client = client;
kpad->input = input;
INIT_DELAYED_WORK(&kpad->work, adp5588_work);
ret = adp5588_read(client, DEV_ID);
if (ret < 0) {
error = ret;
goto err_free_mem;
}
revid = (u8) ret & ADP5588_DEVICE_ID_MASK;
if (WA_DELAYED_READOUT_REVID(revid))
kpad->delay = msecs_to_jiffies(30);
input->name = client->name;
input->phys = "adp5588-keys/input0";
input->dev.parent = &client->dev;
input_set_drvdata(input, kpad);
input->id.bustype = BUS_I2C;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = revid;
input->keycodesize = sizeof(kpad->keycode[0]);
input->keycodemax = pdata->keymapsize;
input->keycode = kpad->keycode;
memcpy(kpad->keycode, pdata->keymap,
pdata->keymapsize * input->keycodesize);
kpad->gpimap = pdata->gpimap;
kpad->gpimapsize = pdata->gpimapsize;
/* setup input device */
__set_bit(EV_KEY, input->evbit);
if (pdata->repeat)
__set_bit(EV_REP, input->evbit);
for (i = 0; i < input->keycodemax; i++)
__set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
__clear_bit(KEY_RESERVED, input->keybit);
if (kpad->gpimapsize)
__set_bit(EV_SW, input->evbit);
for (i = 0; i < kpad->gpimapsize; i++)
__set_bit(kpad->gpimap[i].sw_evt, input->swbit);
error = input_register_device(input);
if (error) {
dev_err(&client->dev, "unable to register input device\n");
goto err_free_mem;
}
error = request_irq(client->irq, adp5588_irq,
IRQF_TRIGGER_FALLING | IRQF_DISABLED,
client->dev.driver->name, kpad);
if (error) {
dev_err(&client->dev, "irq %d busy?\n", client->irq);
goto err_unreg_dev;
}
error = adp5588_setup(client);
if (error)
goto err_free_irq;
if (kpad->gpimapsize)
adp5588_report_switch_state(kpad);
error = adp5588_gpio_add(kpad);
if (error)
goto err_free_irq;
device_init_wakeup(&client->dev, 1);
i2c_set_clientdata(client, kpad);
dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
return 0;
err_free_irq:
free_irq(client->irq, kpad);
err_unreg_dev:
input_unregister_device(input);
input = NULL;
err_free_mem:
input_free_device(input);
kfree(kpad);
return error;
}
/**
* phylink_ethtool_ksettings_set() - set the link settings
* @pl: a pointer to a &struct phylink returned from phylink_create()
* @kset: a pointer to a &struct ethtool_link_ksettings for the desired modes
*/
int phylink_ethtool_ksettings_set(struct phylink *pl,
const struct ethtool_link_ksettings *kset)
{
struct ethtool_link_ksettings our_kset;
struct phylink_link_state config;
int ret;
ASSERT_RTNL();
if (kset->base.autoneg != AUTONEG_DISABLE &&
kset->base.autoneg != AUTONEG_ENABLE)
return -EINVAL;
config = pl->link_config;
/* Mask out unsupported advertisements */
linkmode_and(config.advertising, kset->link_modes.advertising,
pl->supported);
/* FIXME: should we reject autoneg if phy/mac does not support it? */
if (kset->base.autoneg == AUTONEG_DISABLE) {
const struct phy_setting *s;
/* Autonegotiation disabled, select a suitable speed and
* duplex.
*/
s = phy_lookup_setting(kset->base.speed, kset->base.duplex,
pl->supported, false);
if (!s)
return -EINVAL;
/* If we have a fixed link (as specified by firmware), refuse
* to change link parameters.
*/
if (pl->link_an_mode == MLO_AN_FIXED &&
(s->speed != pl->link_config.speed ||
s->duplex != pl->link_config.duplex))
return -EINVAL;
config.speed = s->speed;
config.duplex = s->duplex;
config.an_enabled = false;
__clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
} else {
/* If we have a fixed link, refuse to enable autonegotiation */
if (pl->link_an_mode == MLO_AN_FIXED)
return -EINVAL;
config.speed = SPEED_UNKNOWN;
config.duplex = DUPLEX_UNKNOWN;
config.an_enabled = true;
__set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
}
if (phylink_validate(pl, pl->supported, &config))
return -EINVAL;
/* If autonegotiation is enabled, we must have an advertisement */
if (config.an_enabled && phylink_is_empty_linkmode(config.advertising))
return -EINVAL;
our_kset = *kset;
linkmode_copy(our_kset.link_modes.advertising, config.advertising);
our_kset.base.speed = config.speed;
our_kset.base.duplex = config.duplex;
/* If we have a PHY, configure the phy */
if (pl->phydev) {
ret = phy_ethtool_ksettings_set(pl->phydev, &our_kset);
if (ret)
return ret;
}
mutex_lock(&pl->state_mutex);
/* Configure the MAC to match the new settings */
linkmode_copy(pl->link_config.advertising, our_kset.link_modes.advertising);
pl->link_config.interface = config.interface;
pl->link_config.speed = our_kset.base.speed;
pl->link_config.duplex = our_kset.base.duplex;
pl->link_config.an_enabled = our_kset.base.autoneg != AUTONEG_DISABLE;
if (!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
phylink_mac_config(pl, &pl->link_config);
phylink_mac_an_restart(pl);
}
mutex_unlock(&pl->state_mutex);
return 0;
}
static int sh_keysc_probe(struct platform_device *pdev)
{
struct sh_keysc_priv *priv;
struct sh_keysc_info *pdata;
struct resource *res;
struct input_dev *input;
int i;
int irq, error;
if (!dev_get_platdata(&pdev->dev)) {
dev_err(&pdev->dev, "no platform data defined\n");
error = -EINVAL;
goto err0;
}
error = -ENXIO;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "failed to get I/O memory\n");
goto err0;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "failed to get irq\n");
goto err0;
}
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (priv == NULL) {
dev_err(&pdev->dev, "failed to allocate driver data\n");
error = -ENOMEM;
goto err0;
}
platform_set_drvdata(pdev, priv);
memcpy(&priv->pdata, dev_get_platdata(&pdev->dev), sizeof(priv->pdata));
pdata = &priv->pdata;
priv->iomem_base = ioremap_nocache(res->start, resource_size(res));
if (priv->iomem_base == NULL) {
dev_err(&pdev->dev, "failed to remap I/O memory\n");
error = -ENXIO;
goto err1;
}
priv->input = input_allocate_device();
if (!priv->input) {
dev_err(&pdev->dev, "failed to allocate input device\n");
error = -ENOMEM;
goto err2;
}
input = priv->input;
input->evbit[0] = BIT_MASK(EV_KEY);
input->name = pdev->name;
input->phys = "sh-keysc-keys/input0";
input->dev.parent = &pdev->dev;
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
input->keycode = pdata->keycodes;
input->keycodesize = sizeof(pdata->keycodes[0]);
input->keycodemax = ARRAY_SIZE(pdata->keycodes);
error = request_threaded_irq(irq, NULL, sh_keysc_isr, IRQF_ONESHOT,
dev_name(&pdev->dev), pdev);
if (error) {
dev_err(&pdev->dev, "failed to request IRQ\n");
goto err3;
}
for (i = 0; i < SH_KEYSC_MAXKEYS; i++)
__set_bit(pdata->keycodes[i], input->keybit);
__clear_bit(KEY_RESERVED, input->keybit);
error = input_register_device(input);
if (error) {
dev_err(&pdev->dev, "failed to register input device\n");
goto err4;
}
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
sh_keysc_write(priv, KYCR1, (sh_keysc_mode[pdata->mode].kymd << 8) |
pdata->scan_timing);
sh_keysc_level_mode(priv, 0);
device_init_wakeup(&pdev->dev, 1);
return 0;
err4:
free_irq(irq, pdev);
err3:
input_free_device(input);
err2:
iounmap(priv->iomem_base);
err1:
kfree(priv);
err0:
return error;
}
static int __devinit qt1060_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct qt1060_data *qt1060;
struct input_dev *input;
int i;
int error;
int gpio_atmel_int;
dev_info(&client->dev, "Atmel qt1060 probe begin!\n");
gpio_atmel_int = get_gpio_num_by_name("GPIO_CHANGE");
if(gpio_atmel_int < 0)
{
printk(KERN_WARNING"%s:%d:get GPIO_CHANGE failed\n",__func__,__LINE__);
return -EINVAL;
}
else
{
client->irq = OMAP_GPIO_IRQ(gpio_atmel_int);
}
/* Check functionality */
error = i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE);
if (!error)
{
dev_err(&client->dev, "%s adapter not supported\n",
dev_driver_string(&client->adapter->dev));
return -ENODEV;
}
if (!qt1060_identify(client))
{
printk(KERN_ERR"qt1060_identify error\n");
return -ENODEV;
}
/* Chip is valid and active. Allocate structure */
qt1060 = kzalloc(sizeof(struct qt1060_data), GFP_KERNEL);
input = input_allocate_device();
if (!qt1060 || !input)
{
dev_err(&client->dev, "insufficient memory\n");
error = -ENOMEM;
goto err_alloc_input_mem;
}
qt1060copy = qt1060;
qt1060->client = client;
qt1060->input = input;
dev_set_drvdata(&input->dev, qt1060);
mutex_init(&qt1060->lock);
//INIT_DELAYED_WORK(&qt1060->dwork, qt1060_worker);
qt1060->atmel_wq = create_singlethread_workqueue("atmel_tpk_wq");//for what ? [ atmel_ts_irq_handler ]'s work queue
if (!qt1060->atmel_wq)
{
printk(KERN_ERR"%s: create workqueue failed\n", __func__);
error = -ENOMEM;
goto err_cread_wq_failed1;
}
qt1060->timer_work_queue =
create_singlethread_workqueue("qt1060_timer_wq");
if (!qt1060->timer_work_queue)
{
printk(KERN_ERR"%s: create timer workqueue failed\n", __func__);
error = -ENOMEM;
goto err_cread_wq_failed2;
}
INIT_WORK(&qt1060->work, atmel_tpk_work_func);//创建中断服务的下半部,一些具体的处理
INIT_WORK(&qt1060->timer_work, qt1060_timer_work_func);
//spin_lock_init(&qt1060->lock);
input->name = "qt1060";
input->id.bustype = BUS_I2C;
input->keycode = qt1060->keycodes;
input->keycodesize = sizeof(qt1060->keycodes[0]);
input->keycodemax = qt1060->keynum;
__set_bit(EV_KEY, input->evbit);
__clear_bit(EV_REP, input->evbit);
qt1060->keycodes = qt1060_key2code;
qt1060->keynum = ARRAY_SIZE(qt1060_key2code);
for (i = 0; i < qt1060->keynum; i++)
{
input_set_capability(qt1060->input, EV_KEY,
qt1060->keycodes[i]);
}
__clear_bit(KEY_RESERVED, input->keybit);
/*set the chip register*/
error = qt1060_set_register(client);
if (error)
{
dev_err(&client->dev,
"Failed to set register value!\n");
}
error = input_register_device(qt1060->input);
if (error)
{
dev_err(&client->dev,
"Failed to register input device\n");
goto err_input_register_failed;
}
if (client->irq)
{
error = request_irq(client->irq, qt1060_irq,
IRQF_TRIGGER_LOW, "qt1060", qt1060);// IRQF_TRIGGER_LOW // | IRQF_TRIGGER_RISING
if (error)
{
dev_err(&client->dev,
"failed to allocate irq %d\n", client->irq);
goto err_request_irq;
}
}
i2c_set_clientdata(client, qt1060);
#ifdef CONFIG_HAS_EARLYSUSPEND
qt1060->early_suspend.suspend = atmel_touchkey_early_suspend;
qt1060->early_suspend.resume = atmel_touchkey_later_resume;
register_early_suspend(&qt1060->early_suspend);
#endif
error = led_classdev_register(&client->dev, &qt1060_kp_bl_led);
if (error)
{
dev_err(&client->dev, "unable to register led class driver\n");
goto err_register_led_class;
}
error = sysfs_create_group(&client->dev.kobj, &qt1060_attr_group);
if(error)
{
dev_err(&client->dev, "unable to creat attribute\n");
}
hrtimer_init(&qt1060->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
qt1060->timer.function = qt1060_timer_func;
hrtimer_start(&qt1060->timer, ktime_set(100, 0), HRTIMER_MODE_REL);
dev_info(&client->dev,"QT1060 first time start timer!\n");
dev_info(&client->dev, "Atmel qt1060 probe end!\n");
return 0;
err_register_led_class:
if (client->irq)
free_irq(client->irq, qt1060);
err_request_irq:
input_unregister_device(qt1060->input);
err_input_register_failed:
destroy_workqueue(qt1060->timer_work_queue);
err_cread_wq_failed2:
destroy_workqueue(qt1060->atmel_wq);
err_cread_wq_failed1:
input_free_device(input);
err_alloc_input_mem:
kfree(qt1060);
qt1060copy = NULL;
return error;
}
static irqreturn_t sh_keysc_isr(int irq, void *dev_id)
{
struct platform_device *pdev = dev_id;
struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
struct sh_keysc_info *pdata = &priv->pdata;
int keyout_nr = sh_keysc_mode[pdata->mode].keyout;
int keyin_nr = sh_keysc_mode[pdata->mode].keyin;
DECLARE_BITMAP(keys, SH_KEYSC_MAXKEYS);
DECLARE_BITMAP(keys0, SH_KEYSC_MAXKEYS);
DECLARE_BITMAP(keys1, SH_KEYSC_MAXKEYS);
unsigned char keyin_set, tmp;
int i, k, n;
dev_dbg(&pdev->dev, "isr!\n");
bitmap_fill(keys1, SH_KEYSC_MAXKEYS);
bitmap_zero(keys0, SH_KEYSC_MAXKEYS);
do {
bitmap_zero(keys, SH_KEYSC_MAXKEYS);
keyin_set = 0;
sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
for (i = 0; i < keyout_nr; i++) {
n = keyin_nr * i;
/* drive one KEYOUT pin low, read KEYIN pins */
sh_keysc_write(priv, KYOUTDR, 0xffff ^ (3 << (i * 2)));
udelay(pdata->delay);
tmp = sh_keysc_read(priv, KYINDR);
/* set bit if key press has been detected */
for (k = 0; k < keyin_nr; k++) {
if (tmp & (1 << k))
__set_bit(n + k, keys);
}
/* keep track of which KEYIN bits that have been set */
keyin_set |= tmp ^ ((1 << keyin_nr) - 1);
}
sh_keysc_level_mode(priv, keyin_set);
bitmap_complement(keys, keys, SH_KEYSC_MAXKEYS);
bitmap_and(keys1, keys1, keys, SH_KEYSC_MAXKEYS);
bitmap_or(keys0, keys0, keys, SH_KEYSC_MAXKEYS);
sh_keysc_map_dbg(&pdev->dev, keys, "keys");
} while (sh_keysc_read(priv, KYCR2) & 0x01);
sh_keysc_map_dbg(&pdev->dev, priv->last_keys, "last_keys");
sh_keysc_map_dbg(&pdev->dev, keys0, "keys0");
sh_keysc_map_dbg(&pdev->dev, keys1, "keys1");
for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
k = pdata->keycodes[i];
if (!k)
continue;
if (test_bit(i, keys0) == test_bit(i, priv->last_keys))
continue;
if (test_bit(i, keys1) || test_bit(i, keys0)) {
input_event(priv->input, EV_KEY, k, 1);
__set_bit(i, priv->last_keys);
}
if (!test_bit(i, keys1)) {
input_event(priv->input, EV_KEY, k, 0);
__clear_bit(i, priv->last_keys);
}
}
input_sync(priv->input);
return IRQ_HANDLED;
}
void rt2x00lib_txdone(struct queue_entry *entry,
struct txdone_entry_desc *txdesc)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
/*
* Unmap the skb.
*/
rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
/*
* Send frame to debugfs immediately, after this call is completed
* we are going to overwrite the skb->cb array.
*/
rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry->skb);
/*
* Update TX statistics.
*/
rt2x00dev->link.qual.tx_success +=
test_bit(TXDONE_SUCCESS, &txdesc->flags);
rt2x00dev->link.qual.tx_failed +=
test_bit(TXDONE_FAILURE, &txdesc->flags);
/*
* Initialize TX status
*/
memset(&tx_info->status, 0, sizeof(tx_info->status));
tx_info->status.ack_signal = 0;
tx_info->status.excessive_retries =
test_bit(TXDONE_EXCESSIVE_RETRY, &txdesc->flags);
tx_info->status.retry_count = txdesc->retry;
if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
if (test_bit(TXDONE_SUCCESS, &txdesc->flags))
tx_info->flags |= IEEE80211_TX_STAT_ACK;
else if (test_bit(TXDONE_FAILURE, &txdesc->flags))
rt2x00dev->low_level_stats.dot11ACKFailureCount++;
}
if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
if (test_bit(TXDONE_SUCCESS, &txdesc->flags))
rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
else if (test_bit(TXDONE_FAILURE, &txdesc->flags))
rt2x00dev->low_level_stats.dot11RTSFailureCount++;
}
/*
* Only send the status report to mac80211 when TX status was
* requested by it. If this was a extra frame coming through
* a mac80211 library call (RTS/CTS) then we should not send the
* status report back.
*/
if (tx_info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)
ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb);
else
dev_kfree_skb_irq(entry->skb);
/*
* Make this entry available for reuse.
*/
entry->skb = NULL;
entry->flags = 0;
rt2x00dev->ops->lib->init_txentry(rt2x00dev, entry);
__clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
/*
* If the data queue was below the threshold before the txdone
* handler we must make sure the packet queue in the mac80211 stack
* is reenabled when the txdone handler has finished.
*/
if (!rt2x00queue_threshold(entry->queue))
ieee80211_wake_queue(rt2x00dev->hw, qid);
}
static int __devinit qt2160_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct qt2160_data *qt2160;
struct input_dev *input;
int i;
int error;
/* Check functionality */
error = i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE);
if (!error) {
dev_err(&client->dev, "%s adapter not supported\n",
dev_driver_string(&client->adapter->dev));
return -ENODEV;
}
if (!qt2160_identify(client))
return -ENODEV;
/* Chip is valid and active. Allocate structure */
qt2160 = kzalloc(sizeof(struct qt2160_data), GFP_KERNEL);
input = input_allocate_device();
if (!qt2160 || !input) {
dev_err(&client->dev, "insufficient memory\n");
error = -ENOMEM;
goto err_free_mem;
}
qt2160->client = client;
qt2160->input = input;
INIT_DELAYED_WORK(&qt2160->dwork, qt2160_worker);
spin_lock_init(&qt2160->lock);
input->name = "AT42QT2160 Touch Sense Keyboard";
input->id.bustype = BUS_I2C;
input->keycode = qt2160->keycodes;
input->keycodesize = sizeof(qt2160->keycodes[0]);
input->keycodemax = ARRAY_SIZE(qt2160_key2code);
__set_bit(EV_KEY, input->evbit);
__clear_bit(EV_REP, input->evbit);
for (i = 0; i < ARRAY_SIZE(qt2160_key2code); i++) {
qt2160->keycodes[i] = qt2160_key2code[i];
__set_bit(qt2160_key2code[i], input->keybit);
}
__clear_bit(KEY_RESERVED, input->keybit);
/* Calibrate device */
error = qt2160_write(client, QT2160_CMD_CALIBRATE, 1);
if (error) {
dev_err(&client->dev, "failed to calibrate device\n");
goto err_free_mem;
}
if (client->irq) {
error = request_irq(client->irq, qt2160_irq,
IRQF_TRIGGER_FALLING, "qt2160", qt2160);
if (error) {
dev_err(&client->dev,
"failed to allocate irq %d\n", client->irq);
goto err_free_mem;
}
}
error = input_register_device(qt2160->input);
if (error) {
dev_err(&client->dev,
"Failed to register input device\n");
goto err_free_irq;
}
i2c_set_clientdata(client, qt2160);
qt2160_schedule_read(qt2160);
return 0;
err_free_irq:
if (client->irq)
free_irq(client->irq, qt2160);
err_free_mem:
input_free_device(input);
kfree(qt2160);
return error;
}
void c2_pd_free(struct c2_dev *c2dev, struct c2_pd *pd)
{
spin_lock(&c2dev->pd_table.lock);
__clear_bit(pd->pd_id, c2dev->pd_table.table);
spin_unlock(&c2dev->pd_table.lock);
}
static int opencores_kbd_probe(struct platform_device *pdev)
{
struct input_dev *input;
struct opencores_kbd *opencores_kbd;
struct resource *res;
int irq, i, error;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "missing board memory resource\n");
return -EINVAL;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "missing board IRQ resource\n");
return -EINVAL;
}
opencores_kbd = devm_kzalloc(&pdev->dev, sizeof(*opencores_kbd),
GFP_KERNEL);
if (!opencores_kbd)
return -ENOMEM;
input = devm_input_allocate_device(&pdev->dev);
if (!input) {
dev_err(&pdev->dev, "failed to allocate input device\n");
return -ENOMEM;
}
opencores_kbd->input = input;
opencores_kbd->addr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(opencores_kbd->addr))
error = PTR_ERR(opencores_kbd->addr);
input->name = pdev->name;
input->phys = "opencores-kbd/input0";
input_set_drvdata(input, opencores_kbd);
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
input->keycode = opencores_kbd->keycodes;
input->keycodesize = sizeof(opencores_kbd->keycodes[0]);
input->keycodemax = ARRAY_SIZE(opencores_kbd->keycodes);
__set_bit(EV_KEY, input->evbit);
for (i = 0; i < ARRAY_SIZE(opencores_kbd->keycodes); i++) {
/*
* OpenCores controller happens to have scancodes match
* our KEY_* definitions.
*/
opencores_kbd->keycodes[i] = i;
__set_bit(opencores_kbd->keycodes[i], input->keybit);
}
__clear_bit(KEY_RESERVED, input->keybit);
error = devm_request_irq(&pdev->dev, irq, &opencores_kbd_isr,
IRQF_TRIGGER_RISING,
pdev->name, opencores_kbd);
if (error) {
dev_err(&pdev->dev, "unable to claim irq %d\n", irq);
return error;
}
error = input_register_device(input);
if (error) {
dev_err(&pdev->dev, "unable to register input device\n");
return error;
}
platform_set_drvdata(pdev, opencores_kbd);
return 0;
}
