/*! \fn activityDetectedRoutine(void)
* \brief What to do when user activity has been detected
*/
void activityDetectedRoutine(void)
{
// Activate timers for automatic switch off & user interaction timeout
activateTimer(TIMER_LIGHT, LIGHT_TIMER_DEL);
activateTimer(TIMER_SCREEN, SCREEN_TIMER_DEL);
activateTimer(SLOW_TIMER_LOCKOUT, getMooltipassParameterInEeprom(LOCK_TIMEOUT_PARAM));
activateTimer(TIMER_USERINT, ((uint16_t)controlEepromParameter(getMooltipassParameterInEeprom(USER_INTER_TIMEOUT_PARAM), MIN_USER_INTER_DEL/1000, MAX_USER_INTER_DEL/1000)) << 10);
// If the screen was off, turn it on!
if (oledIsOn() == FALSE)
{
oledOn();
screenComingOnDelay();
}
// If we are in screen saver mode, exit it!
if (screenSaverOn == TRUE)
{
screenSaverOn = FALSE;
}
// There are only lights in the Mooltipass standard version
#if defined(HARDWARE_OLIVIER_V1)
// If the lights were off, turn them on!
if (areLightsOn == FALSE)
{
setPwmDc(MAX_PWM_VAL);
activateGuardKey();
areLightsOn = TRUE;
}
#endif
}
/*! \fn activityDetectedRoutine(void)
* \brief What to do when user activity has been detected
*/
void activityDetectedRoutine(void)
{
#ifdef HARDWARE_V1
return;
#endif
// Activate timers for automatic switch off
activateTimer(TIMER_LIGHT, LIGHT_TIMER_DEL);
activateTimer(TIMER_SCREEN, SCREEN_TIMER_DEL);
// If the screen was off, turn it on!
if (oledIsOn() == FALSE)
{
oledOn();
screenComingOnDelay();
}
// If the lights were off, turn them on!
if (areLightsOn == FALSE)
{
setPwmDc(MAX_PWM_VAL);
activateGuardKey();
areLightsOn = TRUE;
}
}
void QGeoPositionInfoSourceAndroid::updateTimeoutElapsed()
{
QGeoPositionInfo position;
position=m_lastUpdate;
if (position.isValid())
{
if (m_positionInfoState & QGeoPositionInfoSourceAndroid::RequestActive)
{
m_requestTimer->stop();
m_positionInfoState &= ~QGeoPositionInfoSourceAndroid::RequestActive;
if (m_positionInfoState & QGeoPositionInfoSourceAndroid::Stopped
||!(m_positionInfoState & QGeoPositionInfoSourceAndroid::StartUpdateActive))
{
QtLocationJni::disableUpdates(this);
}
}
emit positionUpdated(position);
}
else
{
emit updateTimeout();
}
activateTimer();
}
void QGeoSatelliteInfoSourceMaemo::requestUpdate(int timeout)
{
int timeoutForRequest = 0;
if (!timeout) {
if (LiblocationWrapper::instance()->isActive())
// If GPS is active, assume quick fix.
timeoutForRequest = DEFAULT_UPDATE_INTERVAL;
else
// Otherwise reserve longer time to get a fix.
timeoutForRequest = POWERSAVE_POWERON_PERIOD;
} else if (timeout < MINIMUM_UPDATE_INTERVAL) {
if (satelliteInfoState & QGeoSatelliteInfoSourceMaemo::RequestActive)
return;
emit requestTimeout();
return;
} else {
timeoutForRequest = timeout;
}
satelliteInfoState |= QGeoSatelliteInfoSourceMaemo::RequestActive;
if (!(LiblocationWrapper::instance()->isActive()))
LiblocationWrapper::instance()->start();
activateTimer();
requestTimer->start(timeoutForRequest);
}
void CIntObject::setTimer(int msToTrigger)
{
if (!(active & TIME))
activateTimer();
toNextTick = timerDelay = msToTrigger;
used |= TIME;
}
// public slots:
void QGeoPositionInfoSourceAndroid::startUpdates()
{
QtLocationJni::requestUpdates(updateInterval(),this);
m_positionInfoState |=QGeoPositionInfoSourceAndroid::Started;
m_positionInfoState &=~QGeoPositionInfoSourceAndroid::Stopped;
m_positionInfoState |= QGeoPositionInfoSourceAndroid::StartUpdateActive;
activateTimer();
}
void QGeoSatelliteInfoSourceMaemo::startUpdates()
{
startLocationDaemon();
// Ensure that powersave is selected, if stopUpdates() has been called,
// but selected update interval is still greater than POWERSAVE_THRESHOLD.
if (timerInterval >= POWERSAVE_THRESHOLD)
satelliteInfoState |= QGeoSatelliteInfoSourceMaemo::PowersaveActive;
activateTimer();
}
/*! \fn getTouchedPositionAnswer(uint8_t led_mask)
* \brief Use the capacitive interface to get quarter position
* \param led_mask Led mask for the touchdetection routine
* \return Number between 0 and 5 for valid pos, -1 otherwise
*/
int8_t getTouchedPositionAnswer(uint8_t led_mask)
{
#ifdef HARDWARE_V1
_delay_ms(2000);
#endif
#if defined(ALWAYS_ACCEPT_REQUESTS) || defined(HARDWARE_V1)
// First quarter is discarded, it means we want yes or no!
if (led_mask & LED_MASK_WHEEL_TLEFT)
{
return TOUCHPOS_RIGHT;
}
else
{
return TOUCHPOS_WHEEL_TLEFT;
}
#endif
RET_TYPE touch_detect_result;
// Switch on lights
activityDetectedRoutine();
// Clear possible remaining detection
touchDetectionRoutine(led_mask);
touchWaitForWheelReleased();
touchClearCurrentDetections();
// Wait for a touch press, delay stored in eeprom (1024 is quite close to 1000 ;-) )
activateTimer(TIMER_USERINT, ((uint16_t)controlEepromParameter(getMooltipassParameterInEeprom(USER_INTER_TIMEOUT_PARAM), MIN_USER_INTER_DEL/1000, MAX_USER_INTER_DEL/1000)) << 10);
do
{
// User interaction timeout or smartcard removed
if ((hasTimerExpired(TIMER_USERINT, TRUE) == TIMER_EXPIRED) || (isSmartCardAbsent() == RETURN_OK))
{
return -1;
}
touch_detect_result = touchDetectionRoutine(led_mask) & TOUCH_PRESS_MASK;
}
while (!touch_detect_result);
// Did the user press one of the two touch buttons?
if (touch_detect_result & RETURN_LEFT_PRESSED)
{
return TOUCHPOS_LEFT;
}
else if (touch_detect_result & RETURN_RIGHT_PRESSED)
{
return TOUCHPOS_RIGHT;
}
else
{
return (int8_t)getWheelTouchDetectionQuarter();
}
}
void QGeoSatelliteInfoSourceMaemo::requestTimeoutElapsed()
{
updateTimer->stop();
emit requestTimeout();
satelliteInfoState &= ~QGeoSatelliteInfoSourceMaemo::RequestActive;
if (satelliteInfoState & QGeoSatelliteInfoSourceMaemo::Stopped)
if (LiblocationWrapper::instance()->isActive())
LiblocationWrapper::instance()->stop();
activateTimer();
}
void QGeoPositionInfoSourceAndroid::requestTimeoutElapsed()
{
m_updateTimer->stop();
m_positionInfoState &=~QGeoPositionInfoSourceAndroid::RequestActive;
if (m_positionInfoState & QGeoPositionInfoSourceAndroid::Stopped
||!(m_positionInfoState & QGeoPositionInfoSourceAndroid::StartUpdateActive))
{
QtLocationJni::disableUpdates(this);
}
emit updateTimeout();
activateTimer();
}
/*! \fn usbKeyboardSend(void)
* \brief Send the contents of keyboard_keys and keyboard_modifier_keys
* \return If we managed to send the keyboard keys
*/
RET_TYPE usbKeyboardSend(void)
{
uint8_t i, intr_state;
if (!usb_configuration)
{
return RETURN_COM_NOK;
}
intr_state = SREG;
cli();
UENUM = KEYBOARD_ENDPOINT;
// Activate timeout timer
activateTimer(TIMER_WAIT_FUNCTS, USB_WRITE_TIMEOUT);
while (1)
{
// are we ready to transmit?
if (UEINTX & (1<<RWAL))
{
break;
}
SREG = intr_state;
// has the USB gone offline?
if (!usb_configuration)
{
return RETURN_COM_NOK;
}
// have we waited too long?
if (hasTimerExpired(TIMER_WAIT_FUNCTS, TRUE) == TIMER_EXPIRED)
{
return RETURN_COM_TIMEOUT;
}
// get ready to try checking again
intr_state = SREG;
cli();
UENUM = KEYBOARD_ENDPOINT;
}
UEDATX = keyboard_modifier_keys;
UEDATX = 0;
for (i=0; i<6; i++)
{
UEDATX = keyboard_keys[i];
}
UEINTX = 0x3A;
keyboard_idle_count = 0;
SREG = intr_state;
return RETURN_COM_TRANSF_OK;
}
/*! \fn usbRawHidRecv(uint8_t *buffer, uint8_t timeout)
* \brief Receive a packet, with timeout
* \param buffer Pointer to the buffer to store received data
* \return RETURN_COM_TRANSF_OK or RETURN_COM_NOK or RETURN_COM_TIMEOUT
*/
RET_TYPE usbRawHidRecv(uint8_t *buffer)
{
uint8_t intr_state;
uint8_t i = 0;
// if we're not online (enumerated and configured), error
if (!usb_configuration)
{
return RETURN_COM_NOK;
}
intr_state = SREG;
cli();
// Activate timeout timer
activateTimer(TIMER_WAIT_FUNCTS, USB_READ_TIMEOUT);
UENUM = RAWHID_RX_ENDPOINT;
// wait for data to be available in the FIFO
while (1)
{
if (UEINTX & (1<<RWAL))
{
break;
}
SREG = intr_state;
if (hasTimerExpired(TIMER_WAIT_FUNCTS, TRUE) == TIMER_EXPIRED)
{
return RETURN_COM_TIMEOUT;
}
if (!usb_configuration)
{
return RETURN_COM_NOK;
}
intr_state = SREG;
cli();
UENUM = RAWHID_RX_ENDPOINT;
}
for(i = 0; i < RAWHID_RX_SIZE; i++)
{
*buffer++ = UEDATX;
}
// release the buffer
UEINTX = 0x6B;
SREG = intr_state;
return RETURN_COM_TRANSF_OK;
}
void CIntObject::activate(ui16 what)
{
if(what & LCLICK)
activateLClick();
if(what & RCLICK)
activateRClick();
if(what & HOVER)
activateHover();
if(what & MOVE)
activateMouseMove();
if(what & KEYBOARD)
activateKeys();
if(what & TIME)
activateTimer();
if(what & WHEEL)
activateWheel();
if(what & DOUBLECLICK)
activateDClick();
}
void QGeoSatelliteInfoSourceMaemo::satelliteStatus()
{
QList<QGeoSatelliteInfo> satellitesInView =
LiblocationWrapper::instance()->satellitesInView();
QList<QGeoSatelliteInfo> satellitesInUse =
LiblocationWrapper::instance()->satellitesInUse();
if (satelliteInfoState & QGeoSatelliteInfoSourceMaemo::RequestActive) {
satelliteInfoState &= ~QGeoSatelliteInfoSourceMaemo::RequestActive;
requestTimer->stop();
if (satelliteInfoState & QGeoSatelliteInfoSourceMaemo::Stopped) {
if (LiblocationWrapper::instance()->isActive()) {
LiblocationWrapper::instance()->stop();
}
}
// Ensure that requested satellite info is emitted even though
// powersave is active and GPS would normally be off.
if ((satelliteInfoState & QGeoSatelliteInfoSourceMaemo::PowersaveActive) &&
(satelliteInfoState & QGeoSatelliteInfoSourceMaemo::Stopped)) {
if (satellitesInView.length()) {
emit satellitesInViewUpdated(satellitesInView);
emit satellitesInUseUpdated(satellitesInUse);
}
}
}
// Make sure that if update is triggered when waking up, there
// is no false position update.
if (!((satelliteInfoState & QGeoSatelliteInfoSourceMaemo::PowersaveActive) &&
(satelliteInfoState & QGeoSatelliteInfoSourceMaemo::Stopped))) {
if (satellitesInView.length()) {
emit satellitesInViewUpdated(satellitesInView);
emit satellitesInUseUpdated(satellitesInUse);
}
}
activateTimer();
}
void QGeoPositionInfoSourceAndroid::requestUpdate(int timeout)
{
int timeoutForRequest = 0;
if (timeout < MINIMUM_UPDATE_INTERVAL)
{
if (m_positionInfoState & QGeoPositionInfoSourceAndroid::RequestActive)
return;
emit updateTimeout();
return;
}
else
{
timeoutForRequest = timeout;
}
m_positionInfoState |= QGeoPositionInfoSourceAndroid::RequestActive;
QtLocationJni::requestUpdates(updateInterval(),this);
activateTimer();
m_requestTimer->start(timeoutForRequest);
}
void QGeoSatelliteInfoSourceMaemo::setUpdateInterval(int msec)
{
bool updateTimerInterval = false;
if (satelliteInfoState & QGeoSatelliteInfoSourceMaemo::PowersaveActive)
if (satelliteInfoState & QGeoSatelliteInfoSourceMaemo::Stopped)
updateTimerInterval = true;
timerInterval = (msec < MINIMUM_UPDATE_INTERVAL) ? MINIMUM_UPDATE_INTERVAL : msec;
if (timerInterval >= POWERSAVE_THRESHOLD)
satelliteInfoState |= QGeoSatelliteInfoSourceMaemo::PowersaveActive;
else
satelliteInfoState &= ~QGeoSatelliteInfoSourceMaemo::PowersaveActive;
// If powersave has been active when new update interval has been set,
// ensure that timer is started.
if(updateTimerInterval)
startLocationDaemon();
// Ensure that new timer interval is taken into use immediately.
activateTimer();
}
/*! \fn main(void)
* \brief Main function
*/
int main(void)
{
uint16_t current_bootkey_val = eeprom_read_word((uint16_t*)EEP_BOOTKEY_ADDR);
RET_TYPE flash_init_result;
RET_TYPE touch_init_result;
RET_TYPE card_detect_ret;
uint8_t fuse_ok = TRUE;
// Disable JTAG to gain access to pins, set prescaler to 1 (fuses not set)
#ifndef PRODUCTION_KICKSTARTER_SETUP
disableJTAG();
CPU_PRESCALE(0);
#endif
// Check fuse settings: boot reset vector, 2k words, SPIEN, BOD 2.6V, programming & ver disabled
if ((boot_lock_fuse_bits_get(GET_LOW_FUSE_BITS) != 0xFF) || (boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS) != 0xD8) || (boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS) != 0xFB) || (boot_lock_fuse_bits_get(GET_LOCK_BITS) != 0xFC))
{
fuse_ok = FALSE;
}
// Check if PB5 is low to start electrical test
DDRB &= ~(1 << 5); PORTB |= (1 << 5);
smallForLoopBasedDelay();
if (!(PINB & (1 << 5)))
{
// Test result, true by default
uint8_t test_result = TRUE;
// Leave flash nS off
DDR_FLASH_nS |= (1 << PORTID_FLASH_nS);
PORT_FLASH_nS |= (1 << PORTID_FLASH_nS);
// Set PORTD as output, leave PORTID_OLED_SS high
DDRD |= 0xFF; PORTD |= 0xFF;
// All other pins are input by default, run our test
for (uint8_t i = 0; i < 4; i++)
{
PORTD |= 0xFF;
smallForLoopBasedDelay();
if (!(PINF & (0xC3)) || !(PINC & (1 << 6)) || !(PINE & (1 << 6)) || !(PINB & (1 << 4)))
{
test_result = FALSE;
}
PORTD &= (1 << PORTID_OLED_SS);
smallForLoopBasedDelay();
if ((PINF & (0xC3)) || (PINC & (1 << 6)) || (PINE & (1 << 6)) || (PINB & (1 << 4)))
{
test_result = FALSE;
}
}
// PB6 as test result output
DDRB |= (1 << 6);
// If test successful, light green LED
if ((test_result == TRUE) && (fuse_ok == TRUE))
{
PORTB |= (1 << 6);
}
else
{
PORTB &= ~(1 << 6);
}
while(1);
}
// This code will only be used for developers and beta testers
#if !defined(PRODUCTION_SETUP) && !defined(PRODUCTION_KICKSTARTER_SETUP)
// Check if we were reset and want to go to the bootloader
if (current_bootkey_val == BOOTLOADER_BOOTKEY)
{
// Disable WDT
wdt_reset();
wdt_clear_flag();
wdt_change_enable();
wdt_stop();
// Store correct bootkey
eeprom_write_word((uint16_t*)EEP_BOOTKEY_ADDR, CORRECT_BOOTKEY);
// Jump to bootloader
start_bootloader();
}
// Check if there was a change in the mooltipass setting storage to reset the parameters to their correct values
if (getMooltipassParameterInEeprom(USER_PARAM_INIT_KEY_PARAM) != USER_PARAM_CORRECT_INIT_KEY)
{
mooltipassParametersInit();
setMooltipassParameterInEeprom(USER_PARAM_INIT_KEY_PARAM, USER_PARAM_CORRECT_INIT_KEY);
}
#endif
// First time initializations for Eeprom (first boot at production or flash layout changes for beta testers)
if (current_bootkey_val != CORRECT_BOOTKEY)
{
// Erase Mooltipass parameters
mooltipassParametersInit();
// Set bootloader password bool to FALSE
eeprom_write_byte((uint8_t*)EEP_BOOT_PWD_SET, FALSE);
}
/* Check if a card is inserted in the Mooltipass to go to the bootloader */
#ifdef AVR_BOOTLOADER_PROGRAMMING
/* Disable JTAG to get access to the pins */
disableJTAG();
/* Init SMC port */
initPortSMC();
/* Delay for detection */
smallForLoopBasedDelay();
#if defined(HARDWARE_V1)
if (PIN_SC_DET & (1 << PORTID_SC_DET))
#elif defined(HARDWARE_OLIVIER_V1)
if (!(PIN_SC_DET & (1 << PORTID_SC_DET)))
#endif
{
uint16_t tempuint16;
/* What follows is a copy from firstDetectFunctionSMC() */
/* Enable power to the card */
PORT_SC_POW &= ~(1 << PORTID_SC_POW);
/* Default state: PGM to 0 and RST to 1 */
PORT_SC_PGM &= ~(1 << PORTID_SC_PGM);
DDR_SC_PGM |= (1 << PORTID_SC_PGM);
PORT_SC_RST |= (1 << PORTID_SC_RST);
DDR_SC_RST |= (1 << PORTID_SC_RST);
/* Activate SPI port */
PORT_SPI_NATIVE &= ~((1 << SCK_SPI_NATIVE) | (1 << MOSI_SPI_NATIVE));
DDRB |= (1 << SCK_SPI_NATIVE) | (1 << MOSI_SPI_NATIVE);
setSPIModeSMC();
/* Let the card come online */
smallForLoopBasedDelay();
/* Check smart card FZ */
readFabricationZone((uint8_t*)&tempuint16);
if ((swap16(tempuint16)) != SMARTCARD_FABRICATION_ZONE)
{
removeFunctionSMC();
start_bootloader();
}
else
{
removeFunctionSMC();
}
}
#endif
initPortSMC(); // Initialize smart card port
initPwm(); // Initialize PWM controller
initIRQ(); // Initialize interrupts
powerSettlingDelay(); // Let the power settle
initUsb(); // Initialize USB controller
powerSettlingDelay(); // Let the USB 3.3V LDO rise
initI2cPort(); // Initialize I2C interface
rngInit(); // Initialize avrentropy library
oledInitIOs(); // Initialize OLED input/outputs
spiUsartBegin(SPI_RATE_8_MHZ); // Start USART SPI at 8MHz
// If offline mode isn't enabled, wait for device to be enumerated
if (getMooltipassParameterInEeprom(OFFLINE_MODE_PARAM) == FALSE)
{
while(!isUsbConfigured()); // Wait for host to set configuration
}
// Set correct timeout_enabled val
mp_timeout_enabled = getMooltipassParameterInEeprom(LOCK_TIMEOUT_ENABLE_PARAM);
// Launch the before flash initialization tests
#ifdef TESTS_ENABLED
beforeFlashInitTests();
#endif
// Check if we can initialize the Flash memory
flash_init_result = initFlash();
// Launch the after flash initialization tests
#ifdef TESTS_ENABLED
afterFlashInitTests();
#endif
// Set up OLED now that USB is receiving full 500mA.
oledBegin(FONT_DEFAULT);
// First time initializations for Flash (first time power up at production)
if (current_bootkey_val != CORRECT_BOOTKEY)
{
// Erase everything non graphic in flash
eraseFlashUsersContents();
// Erase # of cards and # of users
firstTimeUserHandlingInit();
}
// Check if we can initialize the touch sensing element
touch_init_result = initTouchSensing();
// Enable proximity detection
#ifndef HARDWARE_V1
activateProxDetection();
#endif
// Launch the after touch initialization tests
#ifdef TESTS_ENABLED
afterTouchInitTests();
#endif
// Test procedure to check that all HW is working
#if defined(PRODUCTION_SETUP) || defined(PRODUCTION_KICKSTARTER_SETUP)
if (current_bootkey_val != CORRECT_BOOTKEY)
{
RET_TYPE temp_rettype;
// Wait for USB host to upload bundle, which then sets USER_PARAM_INIT_KEY_PARAM
//#ifdef PRODUCTION_KICKSTARTER_SETUP
while(getMooltipassParameterInEeprom(USER_PARAM_INIT_KEY_PARAM) != 0xF1)
{
usbProcessIncoming(USB_CALLER_MAIN);
}
//#endif
// Bundle uploaded, start the screen
oledBegin(FONT_DEFAULT);
oledWriteActiveBuffer();
oledSetXY(0,0);
// LEDs ON, to check
setPwmDc(MAX_PWM_VAL);
switchOnButtonWheelLeds();
guiDisplayRawString(ID_STRING_TEST_LEDS_CH);
// Check flash init
if (flash_init_result != RETURN_OK)
{
guiDisplayRawString(ID_STRING_TEST_FLASH_PB);
}
// Check touch init
if (touch_init_result != RETURN_OK)
{
guiDisplayRawString(ID_STRING_TEST_TOUCH_PB);
}
// Touch instructions
guiDisplayRawString(ID_STRING_TEST_INST_TCH);
// Check prox
while(!(touchDetectionRoutine(0) & RETURN_PROX_DETECTION));
guiDisplayRawString(ID_STRING_TEST_DET);
activateGuardKey();
// Check left
while(!(touchDetectionRoutine(0) & RETURN_LEFT_PRESSED));
guiDisplayRawString(ID_STRING_TEST_LEFT);
// Check wheel
while(!(touchDetectionRoutine(0) & RETURN_WHEEL_PRESSED));
guiDisplayRawString(ID_STRING_TEST_WHEEL);
// Check right
while(!(touchDetectionRoutine(0) & RETURN_RIGHT_PRESSED));
guiDisplayRawString(ID_STRING_TEST_RIGHT);
// Insert card
guiDisplayRawString(ID_STRING_TEST_CARD_INS);
while(isCardPlugged() != RETURN_JDETECT);
temp_rettype = cardDetectedRoutine();
// Check card
if (!((temp_rettype == RETURN_MOOLTIPASS_BLANK) || (temp_rettype == RETURN_MOOLTIPASS_USER)))
{
guiDisplayRawString(ID_STRING_TEST_CARD_PB);
}
// Display result
uint8_t script_return = RETURN_OK;
if ((flash_init_result == RETURN_OK) && (touch_init_result == RETURN_OK) && ((temp_rettype == RETURN_MOOLTIPASS_BLANK) || (temp_rettype == RETURN_MOOLTIPASS_USER)))
{
// Inform script of success
usbSendMessage(CMD_FUNCTIONAL_TEST_RES, 1, &script_return);
// Wait for password to be set
while(eeprom_read_byte((uint8_t*)EEP_BOOT_PWD_SET) != BOOTLOADER_PWDOK_KEY)
{
usbProcessIncoming(USB_CALLER_MAIN);
}
// Display test result
guiDisplayRawString(ID_STRING_TEST_OK);
timerBasedDelayMs(3000);
}
else
{
// Set correct bool
script_return = RETURN_NOK;
// Display test result
guiDisplayRawString(ID_STRING_TEST_NOK);
// Inform script of failure
usbSendMessage(CMD_FUNCTIONAL_TEST_RES, 1, &script_return);
while(1)
{
usbProcessIncoming(USB_CALLER_MAIN);
}
}
}
#endif
// Stop the Mooltipass if we can't communicate with the flash or the touch interface
#if defined(HARDWARE_OLIVIER_V1)
#ifdef PRODUCTION_KICKSTARTER_SETUP
while ((flash_init_result != RETURN_OK) || (touch_init_result != RETURN_OK) || (fuse_ok != TRUE));
#else
while ((flash_init_result != RETURN_OK) || (touch_init_result != RETURN_OK));
#endif
#endif
// First time initializations done.... write correct value in eeprom
if (current_bootkey_val != CORRECT_BOOTKEY)
{
// Store correct bootkey
eeprom_write_word((uint16_t*)EEP_BOOTKEY_ADDR, CORRECT_BOOTKEY);
}
// Write inactive buffer & go to startup screen
oledWriteInactiveBuffer();
guiSetCurrentScreen(SCREEN_DEFAULT_NINSERTED);
guiGetBackToCurrentScreen();
// Launch the after HaD logo display tests
#ifdef TESTS_ENABLED
afterHadLogoDisplayTests();
#endif
// Let's fade in the LEDs
for (uint16_t i = 0; i < MAX_PWM_VAL; i++)
{
setPwmDc(i);
timerBasedDelayMs(0);
}
activityDetectedRoutine();
launchCalibrationCycle();
touchClearCurrentDetections();
// Inhibit touch inputs for the first 3 seconds
activateTimer(TIMER_TOUCH_INHIBIT, 3000);
while (1)
{
// Process possible incoming USB packets
usbProcessIncoming(USB_CALLER_MAIN);
// Call GUI routine once the touch input inhibit timer is finished
if (hasTimerExpired(TIMER_TOUCH_INHIBIT, FALSE) == TIMER_EXPIRED)
{
guiMainLoop();
}
// Check if a card just got inserted / removed
card_detect_ret = isCardPlugged();
// Do appropriate actions on smartcard insertion / removal
if (card_detect_ret == RETURN_JDETECT)
{
// Light up the Mooltipass and call the dedicated function
activityDetectedRoutine();
handleSmartcardInserted();
}
else if (card_detect_ret == RETURN_JRELEASED)
{
// Light up the Mooltipass and call the dedicated function
activityDetectedRoutine();
handleSmartcardRemoved();
// Set correct screen
guiDisplayInformationOnScreen(ID_STRING_CARD_REMOVED);
guiSetCurrentScreen(SCREEN_DEFAULT_NINSERTED);
userViewDelay();
guiGetBackToCurrentScreen();
}
// Two quick caps lock presses wakes up the device
if ((hasTimerExpired(TIMER_CAPS, FALSE) == TIMER_EXPIRED) && (getKeyboardLeds() & HID_CAPS_MASK) && (wasCapsLockTimerArmed == FALSE))
{
wasCapsLockTimerArmed = TRUE;
activateTimer(TIMER_CAPS, CAPS_LOCK_DEL);
}
else if ((hasTimerExpired(TIMER_CAPS, FALSE) == TIMER_RUNNING) && !(getKeyboardLeds() & HID_CAPS_MASK))
{
activityDetectedRoutine();
}
else if ((hasTimerExpired(TIMER_CAPS, FALSE) == TIMER_EXPIRED) && !(getKeyboardLeds() & HID_CAPS_MASK))
{
wasCapsLockTimerArmed = FALSE;
}
// If we have a timeout lock
if ((mp_timeout_enabled == TRUE) && (hasTimerExpired(SLOW_TIMER_LOCKOUT, TRUE) == TIMER_EXPIRED))
{
guiSetCurrentScreen(SCREEN_DEFAULT_INSERTED_LCK);
guiGetBackToCurrentScreen();
handleSmartcardRemoved();
}
}
}
/*! \fn guiAskForConfirmation(const char* string)
* \brief Ask for user confirmation for different things
* \param nb_args Number of text lines (must be either 1 2 or 3/4 (depending on the MP version))
* \param text_object Pointer to the text object if more than 1 line, pointer to the string if not
* \return User confirmation or not
*/
RET_TYPE guiAskForConfirmation(uint8_t nb_args, confirmationText_t* text_object)
{
uint8_t flash_flag = FALSE;
// Check if we want to flash the screen
if ((nb_args & 0xF0) != 0)
{
nb_args = nb_args & 0x0F;
// Check that the user didn't disable it
if (getMooltipassParameterInEeprom(FLASH_SCREEN_PARAM) != FALSE)
{
flash_flag = TRUE;
}
}
#if defined(HARDWARE_OLIVIER_V1)
// Temp string for truncating
char string_tbd[31];
string_tbd[30] = 0;
// Draw asking bitmap
oledClear();
oledBitmapDrawFlash(0, 0, BITMAP_YES_NO_INT_L, 0);
oledBitmapDrawFlash(222, 0, BITMAP_YES_NO_INT_R, 0);
// If more than one line
if (nb_args == 1)
{
// Yeah, that's a bit dirty
oledPutstrXY(0, 24, OLED_CENTRE, (char*)text_object);
}
else
{
while (nb_args--)
{
// Truncate and then display string
memcpy(string_tbd, text_object->lines[nb_args], 30);
oledPutstrXY(0, 2 + (nb_args << 4), OLED_CENTRE, string_tbd);
}
}
// Display result
oledDisplayOtherBuffer();
#elif defined(MINI_VERSION)
// Variables for scrolling
uint8_t string_y_indexes[3];
uint8_t string_extra_chars[3];
uint8_t string_offset_cntrs[3] = {0,0,0};
// Display variables
uint8_t approve_selected = TRUE;
// Draw asking bitmap
oledClear();
miniOledSetMaxTextY(SSD1305_OLED_WIDTH-15);
oledBitmapDrawFlash(SSD1305_OLED_WIDTH-15, 0, BITMAP_APPROVE, 0);
// Display lines.
// Note: line are truncated at the oled driver level when miniOledTextWritingYIncrement is set to FALSE
if (nb_args == 1)
{
miniOledPutCenteredString(THREE_LINE_TEXT_SECOND_POS, (char*)text_object);
}
else if (nb_args == 2)
{
string_y_indexes[0] = TWO_LINE_TEXT_FIRST_POS;
string_y_indexes[1] = TWO_LINE_TEXT_SECOND_POS;
}
else
{
string_y_indexes[0] = THREE_LINE_TEXT_FIRST_POS;
string_y_indexes[1] = THREE_LINE_TEXT_SECOND_POS;
string_y_indexes[2] = THREE_LINE_TEXT_THIRD_POS;
}
// For loop to display lines when there is more than one arg
if (nb_args > 1)
{
for (uint8_t i = 0; i < nb_args; i++)
{
string_extra_chars[i] = strlen(text_object->lines[i]) - miniOledPutCenteredString(string_y_indexes[i], text_object->lines[i]);
}
}
miniOledFlushEntireBufferToDisplay();
miniOledResetMaxTextY();
#endif
// In case the display inverted, set it correctly
if (flash_flag == TRUE)
{
activityDetectedRoutine();
oledInvertedDisplay();
timerBased500MsDelay();
oledNormalDisplay();
timerBased500MsDelay();
oledInvertedDisplay();
timerBased500MsDelay();
oledNormalDisplay();
}
// Wait for user input
#if defined(HARDWARE_OLIVIER_V1)
if(getTouchedPositionAnswer(LED_MASK_WHEEL) == TOUCHPOS_RIGHT)
{
return RETURN_OK;
}
else
{
return RETURN_NOK;
}
#elif defined(MINI_VERSION)
RET_TYPE input_answer = MINI_INPUT_RET_NONE;
// Switch on lights
activityDetectedRoutine();
// Clear possible remaining detection
miniWheelClearDetections();
// Arm timer for scrolling (caps timer that isn't relevant here)
activateTimer(TIMER_CAPS, SCROLLING_DEL);
// Loop while no timeout occurs or no button is pressed
while (input_answer == MINI_INPUT_RET_NONE)
{
input_answer = getYesNoAnswerInput(FALSE);
// Text scrolling
if ((hasTimerExpired(TIMER_CAPS, TRUE) == TIMER_EXPIRED) && (nb_args > 1))
{
miniOledDrawRectangle(0, 0, SSD1305_OLED_WIDTH-15, SSD1305_OLED_HEIGHT, FALSE);
activateTimer(TIMER_CAPS, SCROLLING_DEL);
miniOledSetMaxTextY(SSD1305_OLED_WIDTH-15);
for (uint8_t i = 0; i < nb_args; i++)
{
if (string_extra_chars[i] > 0)
{
miniOledPutCenteredString(string_y_indexes[i], (text_object->lines[i]) + string_offset_cntrs[i]);
if (string_offset_cntrs[i]++ == string_extra_chars[i])
{
string_offset_cntrs[i] = 0;
}
}
else
{
miniOledPutCenteredString(string_y_indexes[i], text_object->lines[i]);
}
}
miniOledFlushEntireBufferToDisplay();
miniOledResetMaxTextY();
}
// Approve / deny display change
if (getWheelCurrentIncrement() != 0)
{
if(approve_selected == FALSE)
{
oledBitmapDrawFlash(SSD1305_OLED_WIDTH-15, 0, BITMAP_APPROVE, 0);
}
else
{
oledBitmapDrawFlash(SSD1305_OLED_WIDTH-15, 0, BITMAP_DENY, 0);
}
approve_selected = !approve_selected;
miniOledFlushEntireBufferToDisplay();
}
}
if ((input_answer == MINI_INPUT_RET_YES) && (approve_selected != FALSE))
{
return RETURN_OK;
}
else
{
return RETURN_NOK;
}
#endif
}
/*! \fn loginSelectionScreen(void)
* \brief Screen displayed to let the user choose/find a login
* \return Valid child node address or 0 otherwise
*/
uint16_t loginSelectionScreen(void)
{
char currentText[SEARCHTEXT_MAX_LENGTH+1];
uint8_t displayRefreshNeeded = TRUE;
uint16_t ret_val = NODE_ADDR_NULL;
uint8_t wasWheelReleased = TRUE;
uint16_t tempParentAddresses[5];
uint8_t currentStringIndex = 0;
uint8_t nbMatchedParents= 0;
uint8_t finished = FALSE;
RET_TYPE temp_rettype;
uint8_t led_mask = 0;
int8_t temp_int8;
// Set current text to a
last_matching_parent_addr = NODE_ADDR_NULL;
last_matching_parent_number = 0;
memcpy(currentText, "a\x00\x00\x00\x00", sizeof(currentText));
// Draw bitmap, display it and write active buffer
oledBitmapDrawFlash(0, 0, BITMAP_LOGIN_FIND, 0);
oledDisplayOtherBuffer();
oledWriteActiveBuffer();
// While the user hasn't chosen a credential
while(!finished)
{
if (displayRefreshNeeded == TRUE)
{
nbMatchedParents = displayCurrentSearchLoginTexts(currentText, tempParentAddresses, currentStringIndex);
displayRefreshNeeded = FALSE;
// Light only the available choices and right arrow
led_mask = 0;
for (temp_int8 = nbMatchedParents; temp_int8 < 5; temp_int8++)
{
led_mask |= (1 << temp_int8);
}
}
// Detect key touches
temp_rettype = touchDetectionRoutine(led_mask);
// Algo to differentiate a tap from a scroll
if ((temp_rettype & RETURN_WHEEL_PRESSED) && (wasWheelReleased == TRUE))
{
// We use the timer dedicated to touch inhibit for min
activateTimer(TIMER_TOUCH_INHIBIT, TAP_MIN_DEL);
// We use the timer dedicated to caps detect for max
activateTimer(TIMER_CAPS, TAP_MAX_DEL);
// This works because we use the same clearing flags
wasWheelReleased = FALSE;
}
else if (temp_rettype & RETURN_WHEEL_RELEASED)
{
// Check if it's a tap and that the selected domain is valid
if ((hasTimerExpired(TIMER_CAPS, FALSE) == TIMER_RUNNING) && (hasTimerExpired(TIMER_TOUCH_INHIBIT, FALSE) == TIMER_EXPIRED) && (getWheelTouchDetectionQuarter() < nbMatchedParents))
{
ret_val = tempParentAddresses[getWheelTouchDetectionQuarter()];
finished = TRUE;
}
wasWheelReleased = TRUE;
}
// Send it to the touch wheel interface logic
temp_int8 = touchWheelIntefaceLogic(temp_rettype);
// Position increment / decrement
if (temp_int8 != 0)
{
if ((currentText[currentStringIndex] == 0x7A) && (temp_int8 == 1))
{
// z->0 wrap
currentText[currentStringIndex] = 0x2F;
}
if ((currentText[currentStringIndex] == 0x39) && (temp_int8 == 1))
{
// 9->a wrap
currentText[currentStringIndex] = 0x60;
}
else if ((currentText[currentStringIndex] == 0x30) && (temp_int8 == -1))
{
// 0->z wrap
currentText[currentStringIndex] = 0x7B;
}
else if ((currentText[currentStringIndex] == 0x61) && (temp_int8 == -1))
{
// a->9 wrap
currentText[currentStringIndex] = 0x3A;
}
currentText[currentStringIndex] += temp_int8;
displayRefreshNeeded = TRUE;
}
if ((isSmartCardAbsent() == RETURN_OK) || (hasTimerExpired(TIMER_USERINT, TRUE) == TIMER_EXPIRED))
{
// Smartcard removed or no interaction for a while
finished = TRUE;
}
else if (temp_rettype & RETURN_LEFT_PRESSED)
{
// Change search index
if (currentStringIndex > 0)
{
currentText[currentStringIndex--] = 0;
displayRefreshNeeded = TRUE;
}
else
{
finished = TRUE;
}
}
else if ((temp_rettype & RETURN_RIGHT_PRESSED) && (nbMatchedParents > 4))
{
// Change search index only if we need to...
currentText[++currentStringIndex] = 'a';
displayRefreshNeeded = TRUE;
}
}
// Set inactive buffer write by default
oledWriteInactiveBuffer();
return ret_val;
}
/*! \fn guiAskForConfirmation(const char* string)
* \brief Ask for user confirmation for different things
* \param nb_args Number of text lines (must be either 1 2 or 3/4 (depending on the MP version))
* \param text_object Pointer to the text object if more than 1 line, pointer to the string if not
* \return User confirmation or not
*/
RET_TYPE guiAskForConfirmation(uint8_t nb_args, confirmationText_t* text_object)
{
uint8_t flash_flag_set = FALSE;
uint8_t flash_flag = FALSE;
uint8_t flash_sm = 0;
// LED animation
#ifdef LEDS_ENABLED_MINI
miniLedsSetAnimation(ANIM_PULSE_UP_RAMP_DOWN);
#endif
// Check if we want to flash the screen
if ((nb_args & 0xF0) != 0)
{
flash_flag_set = TRUE;
nb_args = nb_args & 0x0F;
// Check that the user didn't disable it
if (getMooltipassParameterInEeprom(FLASH_SCREEN_PARAM) != FALSE)
{
flash_flag = TRUE;
}
}
// Variables for scrolling
uint8_t string_y_indexes[3];
uint8_t string_extra_chars[3];
uint8_t string_offset_cntrs[3] = {0,0,0};
// Display variables
uint8_t approve_selected = TRUE;
// Draw asking bitmap
miniOledClearFrameBuffer();
miniOledSetMaxTextY(SSD1305_OLED_WIDTH-15);
miniOledBitmapDrawFlash(SSD1305_OLED_WIDTH-15, 0, BITMAP_APPROVE, 0);
// Display lines.
// Note: line are truncated at the miniOled driver level when miniOledTextWritingYIncrement is set to FALSE (default)
if (nb_args == 1)
{
miniOledPutCenteredString(THREE_LINE_TEXT_SECOND_POS, (char*)text_object);
}
else if (nb_args == 2)
{
string_y_indexes[0] = TWO_LINE_TEXT_FIRST_POS;
string_y_indexes[1] = TWO_LINE_TEXT_SECOND_POS;
}
else
{
string_y_indexes[0] = THREE_LINE_TEXT_FIRST_POS;
string_y_indexes[1] = THREE_LINE_TEXT_SECOND_POS;
string_y_indexes[2] = THREE_LINE_TEXT_THIRD_POS;
}
// For loop to display lines when there is more than one arg
if (nb_args > 1)
{
for (uint8_t i = 0; i < nb_args; i++)
{
string_extra_chars[i] = strlen(text_object->lines[i]) - miniOledPutCenteredString(string_y_indexes[i], text_object->lines[i]);
}
}
miniOledFlushEntireBufferToDisplay();
miniOledResetMaxTextY();
// Wait for user input
RET_TYPE input_answer = MINI_INPUT_RET_NONE;
RET_TYPE detect_result;
// Switch on lights
activityDetectedRoutine();
// Clear possible remaining detection
miniWheelClearDetections();
// Arm timer for scrolling (caps timer that isn't relevant here)
activateTimer(TIMER_CAPS, SCROLLING_DEL);
// Arm timer for flashing
activateTimer(TIMER_FLASHING, 500);
// Loop while no timeout occurs or no button is pressed
while (input_answer == MINI_INPUT_RET_NONE)
{
// User interaction timeout or smartcard removed
if ((hasTimerExpired(TIMER_USERINT, TRUE) == TIMER_EXPIRED) || (isSmartCardAbsent() == RETURN_OK))
{
input_answer = MINI_INPUT_RET_TIMEOUT;
}
// Read usb comms as the plugin could ask to cancel the request
if (usbCancelRequestReceived() == RETURN_OK)
{
input_answer = MINI_INPUT_RET_TIMEOUT;
}
// Screen flashing logic
if ((hasTimerExpired(TIMER_FLASHING, TRUE) == TIMER_EXPIRED) && (flash_flag == TRUE) && (flash_sm < 4))
{
// Look at the flash_sm LSb to know what is the display state
if ((flash_sm++ & 0x01) != 0x00)
{
miniOledNormalDisplay();
}
else
{
miniOledInvertedDisplay();
}
// Re-arm timer
activateTimer(TIMER_FLASHING, 500);
}
// Check if something has been pressed
detect_result = miniGetWheelAction(FALSE, TRUE);
if (detect_result == WHEEL_ACTION_SHORT_CLICK)
{
input_answer = MINI_INPUT_RET_YES;
}
else if (detect_result == WHEEL_ACTION_LONG_CLICK)
{
input_answer = MINI_INPUT_RET_BACK;
}
// Knock to approve
#if defined(HARDWARE_MINI_CLICK_V2)
if ((scanAndGetDoubleZTap(FALSE) == ACC_RET_KNOCK) && (flash_flag_set != FALSE))
{
input_answer = MINI_INPUT_RET_YES;
}
#else
(void)flash_flag_set;
#endif
// Text scrolling
if ((hasTimerExpired(TIMER_CAPS, FALSE) == TIMER_EXPIRED) && (nb_args > 1))
{
miniOledClearFrameBuffer();
activateTimer(TIMER_CAPS, SCROLLING_DEL);
miniOledSetMaxTextY(SSD1305_OLED_WIDTH-15);
if(approve_selected == FALSE)
{
miniOledBitmapDrawFlash(SSD1305_OLED_WIDTH-15, 0, BITMAP_DENY, 0);
}
else
{
miniOledBitmapDrawFlash(SSD1305_OLED_WIDTH-15, 0, BITMAP_APPROVE, 0);
}
for (uint8_t i = 0; i < nb_args; i++)
{
if (string_extra_chars[i] > 0)
{
miniOledPutCenteredString(string_y_indexes[i], (text_object->lines[i]) + string_offset_cntrs[i]);
if (string_offset_cntrs[i]++ == string_extra_chars[i])
{
string_offset_cntrs[i] = 0;
}
}
else
{
miniOledPutCenteredString(string_y_indexes[i], text_object->lines[i]);
}
}
miniOledFlushEntireBufferToDisplay();
miniOledResetMaxTextY();
}
// Approve / deny display change
if (getWheelCurrentIncrement() != 0)
{
if(approve_selected == FALSE)
{
miniOledBitmapDrawFlash(SSD1305_OLED_WIDTH-15, 0, BITMAP_APPROVE, 0);
}
else
{
miniOledBitmapDrawFlash(SSD1305_OLED_WIDTH-15, 0, BITMAP_DENY, 0);
}
approve_selected = !approve_selected;
miniOledFlushEntireBufferToDisplay();
}
}
// In case display was inverted, set it normally
miniOledNormalDisplay();
if ((input_answer == MINI_INPUT_RET_YES) && (approve_selected != FALSE))
{
// LED animation
#ifdef LEDS_ENABLED_MINI
miniLedsSetAnimation(ANIM_NONE);
#endif
return RETURN_OK;
}
else if (input_answer == MINI_INPUT_RET_BACK)
{
// LED animation
#ifdef LEDS_ENABLED_MINI
miniLedsSetAnimation(ANIM_NONE);
#endif
return RETURN_BACK;
}
else
{
// LED animation
#ifdef LEDS_ENABLED_MINI
miniLedsSetAnimation(ANIM_NONE);
#endif
return RETURN_NOK;
}
}