static int matv_release(struct inode *inode, struct file *file)
{
MATV_LOGD(KERN_ERR "******** mt5912 matv release %d I2C Err: %d\n", g_mATVCnt, g_mI2CErrCnt);
down(&g_mATVLock);
if((--g_mATVCnt) > 0)
{
up(&g_mATVLock);
return 0;
}
#ifdef GPIO_MATV_PWR_ENABLE
mt_set_gpio_out(GPIO_MATV_PWR_ENABLE, GPIO_OUT_ZERO);
#endif
#ifdef GPIO_MATV_N_RST
mt_set_gpio_out(GPIO_MATV_N_RST, GPIO_OUT_ZERO);
#endif
//Disable I2D Data pin
#ifdef _MATV_HIGH_SPEED_DMA_
if(gpDMABuf_va){
dma_free_coherent(NULL, 4096, gpDMABuf_va, gpDMABuf_pa);
gpDMABuf_va = NULL;
gpDMABuf_pa = NULL;
}
#endif
if(0!=cust_matv_power_off())
{
MATV_LOGE("[MATV] Fail to power off analog gain\n");
up(&g_mATVLock);
return -EIO;
}
//Switch TP back to normal mode
tpd_switch_normal_mode();
if(g_mATVCnt < 0)
g_mATVCnt = 0;
g_mI2CErrCnt = 0;
up(&g_mATVLock);
return 0;
}
//ting.kang
static int nmi5625_ioctl(struct file *file,
unsigned int cmd, unsigned long arg)
{
struct nmi_5625_dev *d = file->private_data;
long ret = 0;
#ifdef NMI_USE_MTK_I2C_DMA
U8 *pReadData = 0;
U8 *pWriteData = 0;
U8 *pa_addr = 0;
int *user_data_addr;
#else
U8 *kbuf = &i2cBuf[0];
#endif
U16 len;
switch ((cmd&0xffff0000)) {
case NM5625_PWR_2P8_CTL:
printk("NM5625_PWR_2P8_CTL, power11 %s\n",(arg==1)?"on":"off");
if (arg == 1) { /* on */
// mt_set_gpio_out(u32 pin,u32 output)(NMI_POWER_VDDIO_PIN, 1);
if (0 != cust_matv_power_on()) {
goto _fail_;
}
mt_set_gpio_out(NMI_FM_ANT_PIN, GPIO_OUT_ONE);
mt_set_gpio_out(NMI_ATV_ANT_PIN, GPIO_OUT_ZERO);
} else{
// mt_set_gpio_out(NMI_POWER_VDDIO_PIN, 0);
if (0 != cust_matv_power_off()) {
goto _fail_;
}
mt_set_gpio_out(NMI_FM_ANT_PIN, GPIO_OUT_ZERO);
mt_set_gpio_out(NMI_ATV_ANT_PIN, GPIO_OUT_ONE);
}
break;
case NM5625_PWR_1P2_CTL:
printk("NM5625_PWR_1P2_CTL, power %s\n",(arg==1)?"on":"off");
if (arg == 1) { /* on */
#if 0
if(TRUE != hwPowerOn(CAMERA_POWER_VCAM_A, VOL_2800, "nmitv")) {
goto _fail_;
}
mt_set_gpio_mode(GPIO_CAMERA_CMRST1_PIN,GPIO_CAMERA_CMRST1_PIN_M_GPIO);
mt_set_gpio_dir(GPIO_CAMERA_CMRST1_PIN,GPIO_DIR_OUT);
mt_set_gpio_out(GPIO_CAMERA_CMRST1_PIN,GPIO_OUT_ZERO);
mt_set_gpio_mode(GPIO_CAMERA_CMPDN1_PIN,GPIO_CAMERA_CMPDN1_PIN_M_GPIO);
mt_set_gpio_dir(GPIO_CAMERA_CMPDN1_PIN,GPIO_DIR_OUT);
mt_set_gpio_out(GPIO_CAMERA_CMPDN1_PIN,GPIO_OUT_ONE);
///
if(TRUE != hwPowerOn(MT6323_POWER_LDO_VCAM_IO, VOL_1800, "nmitv")) {
goto _fail_;
}
///
#endif
mt_set_gpio_out(NMI_POWER_VCORE_PIN, GPIO_OUT_ONE);
g_bIsAtvStart = true;
}else {
#if 0
mt_set_gpio_mode(GPIO_CAMERA_CMRST1_PIN,GPIO_MODE_00);
mt_set_gpio_dir(GPIO_CAMERA_CMRST1_PIN,GPIO_DIR_OUT);
mt_set_gpio_out(GPIO_CAMERA_CMRST1_PIN,GPIO_OUT_ZERO);
mt_set_gpio_mode(GPIO_CAMERA_CMPDN1_PIN,GPIO_MODE_00);
mt_set_gpio_dir(GPIO_CAMERA_CMPDN1_PIN,GPIO_DIR_OUT);
mt_set_gpio_out(GPIO_CAMERA_CMPDN1_PIN,GPIO_OUT_ZERO);
if(TRUE != hwPowerDown(CAMERA_POWER_VCAM_A, "nmitv")) {
goto _fail_;
}
if(TRUE != hwPowerDown(MT6323_POWER_LDO_VCAM_IO, "nmitv")) {
goto _fail_;
}
///
#endif
mt_set_gpio_out(NMI_POWER_VCORE_PIN, GPIO_OUT_ZERO);
g_bIsAtvStart = false;
///
mt_set_gpio_out(NMI_FM_ANT_PIN, GPIO_OUT_ZERO);
mt_set_gpio_out(NMI_ATV_ANT_PIN, GPIO_OUT_ONE);
}
break;
case NM5625_ATV_RESET_CTL:
printk("NM5625_ATV_RESET_CTL, power %s\n",(arg==1)?"on":"off");
if (arg == 1) {
mt_set_gpio_out(NMI_RESET_PIN, GPIO_OUT_ONE);
}
else {
mt_set_gpio_out(NMI_RESET_PIN, GPIO_OUT_ZERO);
}
break;
case NM5625_ATV_I2C_READ:
len = cmd&0xffff; /* Note: I used the lower 16 bits for size */
dPrint(N_INFO,"NM5625_ATV_I2C_READ , len is (%d)\n" , len );
mutex_lock(&d->mu);
#ifdef NMI_HW_I2C
#ifdef NMI_USE_MTK_I2C_DMA
user_data_addr = (int *)arg;
pReadData = gpDMABuf_va;
pa_addr = gpDMABuf_pa;
if(!pReadData){
printk("[Error] dma_alloc_coherent failed!\n");
mutex_unlock(&d->mu);
goto _fail_;
}
ret = nmi5625_dma_read_m_byte(pReadData, pa_addr, len);
if (ret < 0) {
//dPrint(N_ERR, "nmi: failed i2c read...(%d)\n", ret);
mutex_unlock(&d->mu);
goto _fail_;
}
if (copy_to_user(user_data_addr, pReadData, len) ) {
dPrint(N_ERR, "nmi: failed copy to user...\n");
ret = -EFAULT;
mutex_unlock(&d->mu);
goto _fail_;
}
#else
if ( len > 8 )
{
dPrint(N_ERR, "nmi: failed receive 8 more data from i2s bus , please use dma way to instead.\n");
ret = -EFAULT;
mutex_unlock(&d->mu);
goto _fail_;
}
ret = i2c_master_recv(d->i2c_client_atv, kbuf, len);
if (ret < 0) {
dPrint(N_ERR, "nmi: failed i2c read...(%d)\n", ret);
mutex_unlock(&d->mu);
goto _fail_;
}
if (copy_to_user(arg, i2cBuf, len) ) {
dPrint(N_ERR, "nmi: failed copy to user...\n");
ret = -EFAULT;
mutex_unlock(&d->mu);
goto _fail_;
}
#endif //end for #ifdef NMI_USE_MTK_I2C_DMA
#else
ret = nmi_i2c_read(0x60,kbuf,len);
//dPrint(N_TRACE,"kernel:nmi_i2c_read buf is (%x), length is (%d)\n",kbuf,len);
if (copy_to_user(arg, i2cBuf, len) ) {
dPrint(N_ERR, "nmi: failed copy to user...\n");
ret = -EFAULT;
mutex_unlock(&d->mu);
goto _fail_;
}
#endif
mutex_unlock(&d->mu);
break;
case NM5625_ATV_I2C_WRITE:
len = cmd&0xffff; /* Note: I used the lower 16 bits for size */
dPrint(N_INFO,"NM5625_ATV_I2C_WRITE , len is (%d)\n" , len );
mutex_lock(&d->mu);
#ifdef NMI_HW_I2C
#ifdef NMI_USE_MTK_I2C_DMA
user_data_addr = (int *)arg;
pWriteData = gpDMABuf_va;
pa_addr = gpDMABuf_pa;
if(!pWriteData){
printk("[Error] dma_alloc_coherent failed!\n");
mutex_unlock(&d->mu);
goto _fail_;
}
ret = copy_from_user(pWriteData, user_data_addr, len);
if ( ret < 0 ) {
dPrint(N_ERR, "nmi: failed copy from user...\n");
ret = -EFAULT;
mutex_unlock(&d->mu);
goto _fail_;
}
ret = nmi5625_dma_write_m_byte(pWriteData, pa_addr, len);
if (ret < 0) {
//dPrint(N_ERR, "nmi: failed i2c read...(%d)\n", ret);
mutex_unlock(&d->mu);
goto _fail_;
}
#else
if ( len > 8 )
{
dPrint(N_ERR, "nmi: failed to send 8 more data to i2s bus , please use dma way to instead.\n");
ret = -EFAULT;
mutex_unlock(&d->mu);
goto _fail_;
}
if (copy_from_user(kbuf, arg, len)) {
dPrint(N_ERR, "nmi: failed copy from user...\n");
ret = -EFAULT;
goto _fail_;
}
ret = i2c_master_send(d->i2c_client_atv, kbuf, len);
if (ret < 0) {
dPrint(N_ERR, "nmi: failed i2c write...(%d)\n", ret);
mutex_unlock(&d->mu);
goto _fail_;
}
#endif //end for #ifdef NMI_USE_MTK_I2C_DMA
#else
if (copy_from_user(kbuf, arg, len)) {
dPrint(N_ERR, "nmi: failed copy from user...\n");
ret = -EFAULT;
goto _fail_;
}
ret = nmi_i2c_write(0x60,kbuf,len);
dPrint(N_TRACE,"kernel:nmi_i2c_write buf is (%x), length is (%d)\n",kbuf,len);
#endif
mutex_unlock(&d->mu);
break;
default:
break;
}
_fail_:
//func_exit();
//dPrint(N_TRACE, "nmi_ioctl return value...(%d)\n", ret);
return ret;
}