static u8 *fetch_item(__u8 *start, __u8 *end, struct hid_item *item)
{
u8 b;
if ((end - start) <= 0)
return NULL;
b = *start++;
item->type = (b >> 2) & 3;
item->tag = (b >> 4) & 15;
if (item->tag == HID_ITEM_TAG_LONG) {
item->format = HID_ITEM_FORMAT_LONG;
if ((end - start) < 2)
return NULL;
item->size = *start++;
item->tag = *start++;
if ((end - start) < item->size)
return NULL;
item->data.longdata = start;
start += item->size;
return start;
}
item->format = HID_ITEM_FORMAT_SHORT;
item->size = b & 3;
switch (item->size) {
case 0:
return start;
case 1:
if ((end - start) < 1)
return NULL;
item->data.u8 = *start++;
return start;
case 2:
if ((end - start) < 2)
return NULL;
item->data.u16 = get_unaligned_le16(start);
start = (__u8 *)((__le16 *)start + 1);
return start;
case 3:
item->size++;
if ((end - start) < 4)
return NULL;
item->data.u32 = get_unaligned_le32(start);
start = (__u8 *)((__le32 *)start + 1);
return start;
}
return NULL;
}
/**
* ath5k_hw_set_opmode - Set PCU operating mode
*
* @ah: The &struct ath5k_hw
* @op_mode: &enum nl80211_iftype operating mode
*
* Initialize PCU for the various operating modes (AP/STA etc)
*/
int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode)
{
struct ath_common *common = ath5k_hw_common(ah);
u32 pcu_reg, beacon_reg, low_id, high_id;
ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_MODE, "mode %d\n", op_mode);
/* Preserve rest settings */
pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000;
pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP
| AR5K_STA_ID1_KEYSRCH_MODE
| (ah->ah_version == AR5K_AR5210 ?
(AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0));
beacon_reg = 0;
switch (op_mode) {
case NL80211_IFTYPE_ADHOC:
pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE;
beacon_reg |= AR5K_BCR_ADHOC;
if (ah->ah_version == AR5K_AR5210)
pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
else
AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
break;
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE;
beacon_reg |= AR5K_BCR_AP;
if (ah->ah_version == AR5K_AR5210)
pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
else
AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
break;
case NL80211_IFTYPE_STATION:
pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
| (ah->ah_version == AR5K_AR5210 ?
AR5K_STA_ID1_PWR_SV : 0);
case NL80211_IFTYPE_MONITOR:
pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
| (ah->ah_version == AR5K_AR5210 ?
AR5K_STA_ID1_NO_PSPOLL : 0);
break;
default:
return -EINVAL;
}
/*
* Set PCU registers
*/
low_id = get_unaligned_le32(common->macaddr);
high_id = get_unaligned_le16(common->macaddr + 4);
ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
/*
* Set Beacon Control Register on 5210
*/
if (ah->ah_version == AR5K_AR5210)
ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR);
return 0;
}
static void silead_ts_read_data(struct i2c_client *client)
{
struct silead_ts_data *data = i2c_get_clientdata(client);
struct input_dev *input = data->input;
struct device *dev = &client->dev;
u8 *bufp, buf[SILEAD_TS_DATA_LEN];
int touch_nr, softbutton, error, i;
bool softbutton_pressed = false;
error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_DATA,
SILEAD_TS_DATA_LEN, buf);
if (error < 0) {
dev_err(dev, "Data read error %d\n", error);
return;
}
if (buf[0] > data->max_fingers) {
dev_warn(dev, "More touches reported then supported %d > %d\n",
buf[0], data->max_fingers);
buf[0] = data->max_fingers;
}
touch_nr = 0;
bufp = buf + SILEAD_POINT_DATA_LEN;
for (i = 0; i < buf[0]; i++, bufp += SILEAD_POINT_DATA_LEN) {
softbutton = (bufp[SILEAD_POINT_Y_MSB_OFF] &
SILEAD_EXTRA_DATA_MASK) >> 4;
if (softbutton) {
/*
* For now only respond to softbutton == 0x01, some
* tablets *without* a capacative button send 0x04
* when crossing the edges of the screen.
*/
if (softbutton == 0x01)
softbutton_pressed = true;
continue;
}
/*
* Bits 4-7 are the touch id, note not all models have
* hardware touch ids so atm we don't use these.
*/
data->id[touch_nr] = (bufp[SILEAD_POINT_X_MSB_OFF] &
SILEAD_EXTRA_DATA_MASK) >> 4;
touchscreen_set_mt_pos(&data->pos[touch_nr], &data->prop,
get_unaligned_le16(&bufp[SILEAD_POINT_X_OFF]) & 0xfff,
get_unaligned_le16(&bufp[SILEAD_POINT_Y_OFF]) & 0xfff);
touch_nr++;
}
input_mt_assign_slots(input, data->slots, data->pos, touch_nr, 0);
for (i = 0; i < touch_nr; i++) {
input_mt_slot(input, data->slots[i]);
input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
input_report_abs(input, ABS_MT_POSITION_X, data->pos[i].x);
input_report_abs(input, ABS_MT_POSITION_Y, data->pos[i].y);
dev_dbg(dev, "x=%d y=%d hw_id=%d sw_id=%d\n", data->pos[i].x,
data->pos[i].y, data->id[i], data->slots[i]);
}
input_mt_sync_frame(input);
input_report_key(input, KEY_LEFTMETA, softbutton_pressed);
input_sync(input);
}
static int mt76x2_mac_reset(struct mt76x2_dev *dev, bool hard)
{
static const u8 null_addr[ETH_ALEN] = {};
const u8 *macaddr = dev->mt76.macaddr;
u32 val;
int i, k;
if (!mt76x2_wait_for_mac(dev))
return -ETIMEDOUT;
val = mt76_rr(dev, MT_WPDMA_GLO_CFG);
val &= ~(MT_WPDMA_GLO_CFG_TX_DMA_EN |
MT_WPDMA_GLO_CFG_TX_DMA_BUSY |
MT_WPDMA_GLO_CFG_RX_DMA_EN |
MT_WPDMA_GLO_CFG_RX_DMA_BUSY |
MT_WPDMA_GLO_CFG_DMA_BURST_SIZE);
val |= FIELD_PREP(MT_WPDMA_GLO_CFG_DMA_BURST_SIZE, 3);
mt76_wr(dev, MT_WPDMA_GLO_CFG, val);
mt76x2_mac_pbf_init(dev);
mt76_write_mac_initvals(dev);
mt76x2_fixup_xtal(dev);
mt76_clear(dev, MT_MAC_SYS_CTRL,
MT_MAC_SYS_CTRL_RESET_CSR |
MT_MAC_SYS_CTRL_RESET_BBP);
if (is_mt7612(dev))
mt76_clear(dev, MT_COEXCFG0, MT_COEXCFG0_COEX_EN);
mt76_set(dev, MT_EXT_CCA_CFG, 0x0000f000);
mt76_clear(dev, MT_TX_ALC_CFG_4, BIT(31));
mt76_wr(dev, MT_RF_BYPASS_0, 0x06000000);
mt76_wr(dev, MT_RF_SETTING_0, 0x08800000);
usleep_range(5000, 10000);
mt76_wr(dev, MT_RF_BYPASS_0, 0x00000000);
mt76_wr(dev, MT_MCU_CLOCK_CTL, 0x1401);
mt76_clear(dev, MT_FCE_L2_STUFF, MT_FCE_L2_STUFF_WR_MPDU_LEN_EN);
mt76_wr(dev, MT_MAC_ADDR_DW0, get_unaligned_le32(macaddr));
mt76_wr(dev, MT_MAC_ADDR_DW1, get_unaligned_le16(macaddr + 4));
mt76_wr(dev, MT_MAC_BSSID_DW0, get_unaligned_le32(macaddr));
mt76_wr(dev, MT_MAC_BSSID_DW1, get_unaligned_le16(macaddr + 4) |
FIELD_PREP(MT_MAC_BSSID_DW1_MBSS_MODE, 3) | /* 8 beacons */
MT_MAC_BSSID_DW1_MBSS_LOCAL_BIT);
/* Fire a pre-TBTT interrupt 8 ms before TBTT */
mt76_rmw_field(dev, MT_INT_TIMER_CFG, MT_INT_TIMER_CFG_PRE_TBTT,
8 << 4);
mt76_rmw_field(dev, MT_INT_TIMER_CFG, MT_INT_TIMER_CFG_GP_TIMER,
MT_DFS_GP_INTERVAL);
mt76_wr(dev, MT_INT_TIMER_EN, 0);
mt76_wr(dev, MT_BCN_BYPASS_MASK, 0xffff);
if (!hard)
return 0;
for (i = 0; i < 256 / 32; i++)
mt76_wr(dev, MT_WCID_DROP_BASE + i * 4, 0);
for (i = 0; i < 256; i++)
mt76x2_mac_wcid_setup(dev, i, 0, NULL);
for (i = 0; i < MT_MAX_VIFS; i++)
mt76x2_mac_wcid_setup(dev, MT_VIF_WCID(i), i, NULL);
for (i = 0; i < 16; i++)
for (k = 0; k < 4; k++)
mt76x2_mac_shared_key_setup(dev, i, k, NULL);
for (i = 0; i < 8; i++) {
mt76x2_mac_set_bssid(dev, i, null_addr);
mt76x2_mac_set_beacon(dev, i, NULL);
}
for (i = 0; i < 16; i++)
mt76_rr(dev, MT_TX_STAT_FIFO);
mt76_wr(dev, MT_CH_TIME_CFG,
MT_CH_TIME_CFG_TIMER_EN |
MT_CH_TIME_CFG_TX_AS_BUSY |
MT_CH_TIME_CFG_RX_AS_BUSY |
MT_CH_TIME_CFG_NAV_AS_BUSY |
MT_CH_TIME_CFG_EIFS_AS_BUSY |
FIELD_PREP(MT_CH_TIME_CFG_CH_TIMER_CLR, 1));
mt76x2_init_beacon_offsets(dev);
mt76x2_set_tx_ackto(dev);
return 0;
}
static int nokia_setup_fw(struct hci_uart *hu)
{
struct nokia_bt_dev *btdev = hu->priv;
struct device *dev = &btdev->serdev->dev;
const char *fwname;
const struct firmware *fw;
const u8 *fw_ptr;
size_t fw_size;
int err;
dev_dbg(dev, "setup firmware");
if (btdev->man_id == NOKIA_ID_BCM2048) {
fwname = FIRMWARE_BCM2048;
} else if (btdev->man_id == NOKIA_ID_TI1271) {
fwname = FIRMWARE_TI1271;
} else {
dev_err(dev, "Unsupported bluetooth device!");
return -ENODEV;
}
err = request_firmware(&fw, fwname, dev);
if (err < 0) {
dev_err(dev, "%s: Failed to load Nokia firmware file (%d)",
hu->hdev->name, err);
return err;
}
fw_ptr = fw->data;
fw_size = fw->size;
while (fw_size >= 4) {
u16 pkt_size = get_unaligned_le16(fw_ptr);
u8 pkt_type = fw_ptr[2];
const struct hci_command_hdr *cmd;
u16 opcode;
struct sk_buff *skb;
switch (pkt_type) {
case HCI_COMMAND_PKT:
cmd = (struct hci_command_hdr *)(fw_ptr + 3);
opcode = le16_to_cpu(cmd->opcode);
skb = __hci_cmd_sync(hu->hdev, opcode, cmd->plen,
fw_ptr + 3 + HCI_COMMAND_HDR_SIZE,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
dev_err(dev, "%s: FW command %04x failed (%d)",
hu->hdev->name, opcode, err);
goto done;
}
kfree_skb(skb);
break;
case HCI_NOKIA_RADIO_PKT:
case HCI_NOKIA_NEG_PKT:
case HCI_NOKIA_ALIVE_PKT:
break;
}
fw_ptr += pkt_size + 2;
fw_size -= pkt_size + 2;
}
done:
release_firmware(fw);
return err;
}
static uint16_t r2le(const uint16_t *x)
{
return get_unaligned_le16(x);
}
static void gtco_urb_callback(struct urb *urbinfo)
{
struct gtco *device = urbinfo->context;
struct input_dev *inputdev;
int rc;
u32 val = 0;
s8 valsigned = 0;
char le_buffer[2];
inputdev = device->inputdevice;
if (urbinfo->status == -ECONNRESET ||
urbinfo->status == -ENOENT ||
urbinfo->status == -ESHUTDOWN) {
return;
}
if (urbinfo->status != 0) {
goto resubmit;
}
if (inputdev->id.product == PID_1000 ||
inputdev->id.product == PID_1001 ||
inputdev->id.product == PID_1002) {
switch (device->buffer[0]) {
case 5:
val = ((u16)(device->buffer[8]) << 1);
val |= (u16)(device->buffer[7] >> 7);
input_report_abs(inputdev, ABS_PRESSURE,
device->buffer[8]);
device->buffer[7] = (u8)((device->buffer[7]) & 0x7F);
case 4:
if (device->buffer[6] & 0x40)
device->buffer[6] |= 0x80;
if (device->buffer[7] & 0x40)
device->buffer[7] |= 0x80;
valsigned = (device->buffer[6]);
input_report_abs(inputdev, ABS_TILT_X, (s32)valsigned);
valsigned = (device->buffer[7]);
input_report_abs(inputdev, ABS_TILT_Y, (s32)valsigned);
case 2:
case 3:
val = (device->buffer[5]) & MASK_BUTTON;
input_event(inputdev, EV_MSC, MSC_SERIAL, val);
case 1:
val = get_unaligned_le16(&device->buffer[1]);
input_report_abs(inputdev, ABS_X, val);
val = get_unaligned_le16(&device->buffer[3]);
input_report_abs(inputdev, ABS_Y, val);
val = device->buffer[5] & MASK_INRANGE ? 1 : 0;
input_report_abs(inputdev, ABS_DISTANCE, val);
if (device->buffer[0] == 1) {
val = device->buffer[5] & MASK_BUTTON;
dbg("======>>>>>>REPORT 1: val 0x%X(%d)",
val, val);
input_event(inputdev, EV_MSC, MSC_SERIAL, val);
}
break;
case 7:
input_event(inputdev, EV_MSC, MSC_SCAN,
device->buffer[1]);
break;
}
}
if (inputdev->id.product == PID_400 ||
inputdev->id.product == PID_401) {
if (device->buffer[0] == 2) {
input_event(inputdev, EV_MSC, MSC_SCAN, device->buffer[1]);
}
if (device->buffer[0] == 1) {
char buttonbyte;
if (device->max_X > 0x10000) {
val = (u16)(((u16)(device->buffer[2] << 8)) | (u8)device->buffer[1]);
val |= (u32)(((u8)device->buffer[3] & 0x1) << 16);
input_report_abs(inputdev, ABS_X, val);
le_buffer[0] = (u8)((u8)(device->buffer[3]) >> 1);
le_buffer[0] |= (u8)((device->buffer[3] & 0x1) << 7);
le_buffer[1] = (u8)(device->buffer[4] >> 1);
le_buffer[1] |= (u8)((device->buffer[5] & 0x1) << 7);
val = get_unaligned_le16(le_buffer);
input_report_abs(inputdev, ABS_Y, val);
buttonbyte = device->buffer[5] >> 1;
} else {
static void parse_hid_report_descriptor(struct gtco *device, char * report,
int length)
{
int x, i = 0;
__u8 prefix;
__u8 size;
__u8 tag;
__u8 type;
__u8 data = 0;
__u16 data16 = 0;
__u32 data32 = 0;
int inputnum = 0;
__u32 usage = 0;
__u32 globalval[TAG_GLOB_MAX];
__u32 oldval[TAG_GLOB_MAX];
char maintype = 'x';
char globtype[12];
int indent = 0;
char indentstr[10] = "";
dbg("======>>>>>>PARSE<<<<<<======");
while (i < length) {
prefix = report[i];
i++;
size = PREF_SIZE(prefix);
switch (size) {
case 1:
data = report[i];
break;
case 2:
data16 = get_unaligned_le16(&report[i]);
break;
case 3:
size = 4;
data32 = get_unaligned_le32(&report[i]);
break;
}
i += size;
tag = PREF_TAG(prefix);
type = PREF_TYPE(prefix);
switch (type) {
case TYPE_MAIN:
strcpy(globtype, "");
switch (tag) {
case TAG_MAIN_INPUT:
maintype = 'I';
if (data == 2)
strcpy(globtype, "Variable");
else if (data == 3)
strcpy(globtype, "Var|Const");
dbg("::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits",
globalval[TAG_GLOB_REPORT_ID], inputnum,
globalval[TAG_GLOB_LOG_MAX], globalval[TAG_GLOB_LOG_MAX],
globalval[TAG_GLOB_LOG_MIN], globalval[TAG_GLOB_LOG_MIN],
globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]);
switch (inputnum) {
case 0:
dbg("GER: X Usage: 0x%x", usage);
if (device->max_X == 0) {
device->max_X = globalval[TAG_GLOB_LOG_MAX];
device->min_X = globalval[TAG_GLOB_LOG_MIN];
}
break;
case 1:
dbg("GER: Y Usage: 0x%x", usage);
if (device->max_Y == 0) {
device->max_Y = globalval[TAG_GLOB_LOG_MAX];
device->min_Y = globalval[TAG_GLOB_LOG_MIN];
}
break;
default:
if (usage == DIGITIZER_USAGE_TILT_X) {
if (device->maxtilt_X == 0) {
device->maxtilt_X = globalval[TAG_GLOB_LOG_MAX];
device->mintilt_X = globalval[TAG_GLOB_LOG_MIN];
}
}
if (usage == DIGITIZER_USAGE_TILT_Y) {
if (device->maxtilt_Y == 0) {
device->maxtilt_Y = globalval[TAG_GLOB_LOG_MAX];
device->mintilt_Y = globalval[TAG_GLOB_LOG_MIN];
}
}
if (usage == DIGITIZER_USAGE_TIP_PRESSURE) {
if (device->maxpressure == 0) {
device->maxpressure = globalval[TAG_GLOB_LOG_MAX];
device->minpressure = globalval[TAG_GLOB_LOG_MIN];
}
}
break;
}
inputnum++;
break;
case TAG_MAIN_OUTPUT:
maintype = 'O';
break;
case TAG_MAIN_FEATURE:
maintype = 'F';
break;
case TAG_MAIN_COL_START:
maintype = 'S';
if (data == 0) {
dbg("======>>>>>> Physical");
strcpy(globtype, "Physical");
} else
dbg("======>>>>>>");
indent++;
for (x = 0; x < indent; x++)
indentstr[x] = '-';
indentstr[x] = 0;
for (x = 0; x < TAG_GLOB_MAX; x++)
oldval[x] = globalval[x];
break;
case TAG_MAIN_COL_END:
dbg("<<<<<<======");
maintype = 'E';
indent--;
for (x = 0; x < indent; x++)
indentstr[x] = '-';
indentstr[x] = 0;
for (x = 0; x < TAG_GLOB_MAX; x++)
globalval[x] = oldval[x];
break;
}
switch (size) {
case 1:
dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
indentstr, tag, maintype, size, globtype, data);
break;
case 2:
dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
indentstr, tag, maintype, size, globtype, data16);
break;
case 4:
dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
indentstr, tag, maintype, size, globtype, data32);
break;
}
break;
case TYPE_GLOBAL:
switch (tag) {
case TAG_GLOB_USAGE:
if (device->usage == 0)
device->usage = data;
strcpy(globtype, "USAGE");
break;
case TAG_GLOB_LOG_MIN:
strcpy(globtype, "LOG_MIN");
break;
case TAG_GLOB_LOG_MAX:
strcpy(globtype, "LOG_MAX");
break;
case TAG_GLOB_PHYS_MIN:
strcpy(globtype, "PHYS_MIN");
break;
case TAG_GLOB_PHYS_MAX:
strcpy(globtype, "PHYS_MAX");
break;
case TAG_GLOB_UNIT_EXP:
strcpy(globtype, "EXP");
break;
case TAG_GLOB_UNIT:
strcpy(globtype, "UNIT");
break;
case TAG_GLOB_REPORT_SZ:
strcpy(globtype, "REPORT_SZ");
break;
case TAG_GLOB_REPORT_ID:
strcpy(globtype, "REPORT_ID");
inputnum = 0;
break;
case TAG_GLOB_REPORT_CNT:
strcpy(globtype, "REPORT_CNT");
break;
case TAG_GLOB_PUSH:
strcpy(globtype, "PUSH");
break;
case TAG_GLOB_POP:
strcpy(globtype, "POP");
break;
}
if (tag < TAG_GLOB_MAX) {
switch (size) {
case 1:
dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",
indentstr, globtype, tag, size, data);
globalval[tag] = data;
break;
case 2:
dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",
indentstr, globtype, tag, size, data16);
globalval[tag] = data16;
break;
case 4:
dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",
indentstr, globtype, tag, size, data32);
globalval[tag] = data32;
break;
}
} else {
dbg("%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d ",
indentstr, tag, size);
}
break;
case TYPE_LOCAL:
switch (tag) {
case TAG_GLOB_USAGE:
strcpy(globtype, "USAGE");
usage = data;
break;
case TAG_GLOB_LOG_MIN:
strcpy(globtype, "MIN");
break;
case TAG_GLOB_LOG_MAX:
strcpy(globtype, "MAX");
break;
default:
strcpy(globtype, "UNKNOWN");
break;
}
switch (size) {
case 1:
dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
indentstr, tag, globtype, size, data);
break;
case 2:
dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
indentstr, tag, globtype, size, data16);
break;
case 4:
dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
indentstr, tag, globtype, size, data32);
break;
}
break;
}
}
}
static u16
nouveau_bios_rd16(struct nouveau_object *object, u64 addr)
{
struct nouveau_bios *bios = (void *)object;
return get_unaligned_le16(&bios->data[addr]);
}
static int wacom_parse_hid(struct usb_interface *intf,
struct hid_descriptor *hid_desc,
struct wacom_features *features)
{
struct usb_device *dev = interface_to_usbdev(intf);
char limit = 0;
/* */
int result = 0;
int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0;
unsigned char *report;
report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
if (!report)
return -ENOMEM;
/* */
do {
result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
USB_REQ_GET_DESCRIPTOR,
USB_RECIP_INTERFACE | USB_DIR_IN,
HID_DEVICET_REPORT << 8,
intf->altsetting[0].desc.bInterfaceNumber, /* */
report,
hid_desc->wDescriptorLength,
5000); /* */
} while (result < 0 && limit++ < WAC_MSG_RETRIES);
/* */
if (result < 0)
goto out;
for (i = 0; i < hid_desc->wDescriptorLength; i++) {
switch (report[i]) {
case HID_USAGE_PAGE:
switch (report[i + 1]) {
case HID_USAGE_PAGE_DIGITIZER:
usage = WCM_DIGITIZER;
i++;
break;
case HID_USAGE_PAGE_DESKTOP:
usage = WCM_DESKTOP;
i++;
break;
}
break;
case HID_USAGE:
switch (report[i + 1]) {
case HID_USAGE_X:
if (usage == WCM_DESKTOP) {
if (finger) {
features->device_type = BTN_TOOL_FINGER;
if (features->type == TABLETPC2FG) {
/* */
features->pktlen = WACOM_PKGLEN_TPC2FG;
}
if (features->type == BAMBOO_PT) {
/* */
features->pktlen = WACOM_PKGLEN_BBTOUCH;
features->x_phy =
get_unaligned_le16(&report[i + 5]);
features->x_max =
get_unaligned_le16(&report[i + 8]);
i += 15;
} else {
features->x_max =
get_unaligned_le16(&report[i + 3]);
features->x_phy =
get_unaligned_le16(&report[i + 6]);
features->unit = report[i + 9];
features->unitExpo = report[i + 11];
i += 12;
}
} else if (pen) {
/* */
if (features->type == TABLETPC2FG)
features->pktlen = WACOM_PKGLEN_GRAPHIRE;
features->device_type = BTN_TOOL_PEN;
features->x_max =
get_unaligned_le16(&report[i + 3]);
i += 4;
}
}
break;
case HID_USAGE_Y:
if (usage == WCM_DESKTOP) {
if (finger) {
features->device_type = BTN_TOOL_FINGER;
if (features->type == TABLETPC2FG) {
/* */
features->pktlen = WACOM_PKGLEN_TPC2FG;
features->y_max =
get_unaligned_le16(&report[i + 3]);
features->y_phy =
get_unaligned_le16(&report[i + 6]);
i += 7;
} else if (features->type == BAMBOO_PT) {
/* */
features->pktlen = WACOM_PKGLEN_BBTOUCH;
features->y_phy =
get_unaligned_le16(&report[i + 3]);
features->y_max =
get_unaligned_le16(&report[i + 6]);
i += 12;
} else {
features->y_max =
features->x_max;
features->y_phy =
get_unaligned_le16(&report[i + 3]);
i += 4;
}
} else if (pen) {
/* */
if (features->type == TABLETPC2FG)
features->pktlen = WACOM_PKGLEN_GRAPHIRE;
features->device_type = BTN_TOOL_PEN;
features->y_max =
get_unaligned_le16(&report[i + 3]);
i += 4;
}
}
break;
case HID_USAGE_FINGER:
finger = 1;
i++;
break;
/*
*/
case HID_USAGE_STYLUS:
pen = 1;
i++;
break;
}
break;
case HID_COLLECTION_END:
/* */
finger = usage = 0;
break;
case HID_COLLECTION:
i++;
switch (report[i]) {
case HID_COLLECTION_LOGICAL:
i += wacom_parse_logical_collection(&report[i],
features);
break;
}
break;
}
}
out:
result = 0;
kfree(report);
return result;
}
/* control interface reports status changes with "interrupt" transfers */
static void acm_ctrl_irq(struct urb *urb)
{
struct acm *acm = urb->context;
struct usb_cdc_notification *dr = urb->transfer_buffer;
struct tty_struct *tty;
unsigned char *data;
int newctrl;
int retval;
int status = urb->status;
switch (status) {
case 0:
/* success */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dev_dbg(&acm->control->dev,
"%s - urb shutting down with status: %d\n",
__func__, status);
return;
default:
dev_dbg(&acm->control->dev,
"%s - nonzero urb status received: %d\n",
__func__, status);
goto exit;
}
usb_mark_last_busy(acm->dev);
data = (unsigned char *)(dr + 1);
switch (dr->bNotificationType) {
case USB_CDC_NOTIFY_NETWORK_CONNECTION:
dev_dbg(&acm->control->dev, "%s - network connection: %d\n",
__func__, dr->wValue);
break;
case USB_CDC_NOTIFY_SERIAL_STATE:
tty = tty_port_tty_get(&acm->port);
newctrl = get_unaligned_le16(data);
if (tty) {
if (!acm->clocal &&
(acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) {
dev_dbg(&acm->control->dev,
"%s - calling hangup\n", __func__);
tty_hangup(tty);
}
tty_kref_put(tty);
}
acm->ctrlin = newctrl;
dev_dbg(&acm->control->dev,
"%s - input control lines: dcd%c dsr%c break%c "
"ring%c framing%c parity%c overrun%c\n",
__func__,
acm->ctrlin & ACM_CTRL_DCD ? '+' : '-',
acm->ctrlin & ACM_CTRL_DSR ? '+' : '-',
acm->ctrlin & ACM_CTRL_BRK ? '+' : '-',
acm->ctrlin & ACM_CTRL_RI ? '+' : '-',
acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-',
acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-',
acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-');
break;
default:
dev_dbg(&acm->control->dev,
"%s - unknown notification %d received: index %d "
"len %d data0 %d data1 %d\n",
__func__,
dr->bNotificationType, dr->wIndex,
dr->wLength, data[0], data[1]);
break;
}
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(&acm->control->dev, "%s - usb_submit_urb failed: %d\n",
__func__, retval);
}
int btbcm_setup_patchram(struct hci_dev *hdev)
{
char fw_name[64];
const struct firmware *fw;
u16 subver, rev, pid, vid;
const char *hw_name = NULL;
struct sk_buff *skb;
struct hci_rp_read_local_version *ver;
int i, err;
/* Reset */
err = btbcm_reset(hdev);
if (err)
return err;
/* Read Local Version Info */
skb = btbcm_read_local_version(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
ver = (struct hci_rp_read_local_version *)skb->data;
rev = le16_to_cpu(ver->hci_rev);
subver = le16_to_cpu(ver->lmp_subver);
kfree_skb(skb);
/* Read Verbose Config Version Info */
skb = btbcm_read_verbose_config(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
BT_INFO("%s: BCM: chip id %u", hdev->name, skb->data[1]);
kfree_skb(skb);
/* Read Local Name */
skb = btbcm_read_local_name(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
BT_INFO("%s: %s", hdev->name, (char *)(skb->data + 1));
kfree_skb(skb);
switch ((rev & 0xf000) >> 12) {
case 0:
case 3:
for (i = 0; bcm_uart_subver_table[i].name; i++) {
if (subver == bcm_uart_subver_table[i].subver) {
hw_name = bcm_uart_subver_table[i].name;
break;
}
}
snprintf(fw_name, sizeof(fw_name), "brcm/%s.hcd",
hw_name ? : "BCM");
break;
case 1:
case 2:
/* Read USB Product Info */
skb = btbcm_read_usb_product(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
vid = get_unaligned_le16(skb->data + 1);
pid = get_unaligned_le16(skb->data + 3);
kfree_skb(skb);
for (i = 0; bcm_usb_subver_table[i].name; i++) {
if (subver == bcm_usb_subver_table[i].subver) {
hw_name = bcm_usb_subver_table[i].name;
break;
}
}
snprintf(fw_name, sizeof(fw_name), "brcm/%s-%4.4x-%4.4x.hcd",
hw_name ? : "BCM", vid, pid);
break;
default:
return 0;
}
BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
hw_name ? : "BCM", (subver & 0xe000) >> 13,
(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
err = request_firmware(&fw, fw_name, &hdev->dev);
if (err < 0) {
BT_INFO("%s: BCM: Patch %s not found", hdev->name, fw_name);
goto done;
}
btbcm_patchram(hdev, fw);
release_firmware(fw);
/* Reset */
err = btbcm_reset(hdev);
if (err)
return err;
/* Read Local Version Info */
skb = btbcm_read_local_version(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
ver = (struct hci_rp_read_local_version *)skb->data;
rev = le16_to_cpu(ver->hci_rev);
subver = le16_to_cpu(ver->lmp_subver);
kfree_skb(skb);
BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
hw_name ? : "BCM", (subver & 0xe000) >> 13,
(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
/* Read Local Name */
skb = btbcm_read_local_name(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
BT_INFO("%s: %s", hdev->name, (char *)(skb->data + 1));
kfree_skb(skb);
done:
btbcm_check_bdaddr(hdev);
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
return 0;
}
int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf, int len)
{
int ret = _SUCCESS;
u8 *p;
u8 *pHT_caps_ie = NULL;
u8 *pHT_info_ie = NULL;
struct sta_info *psta = NULL;
u16 cap, ht_cap = false;
uint ie_len = 0;
int group_cipher, pairwise_cipher;
u8 channel, network_type, supportRate[NDIS_802_11_LENGTH_RATES_EX];
int supportRateNum = 0;
u8 OUI1[] = {0x00, 0x50, 0xf2, 0x01};
u8 WMM_PARA_IE[] = {0x00, 0x50, 0xf2, 0x02, 0x01, 0x01};
struct registry_priv *pregistrypriv = &padapter->registrypriv;
struct security_priv *psecuritypriv = &padapter->securitypriv;
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
struct wlan_bssid_ex *pbss_network = (struct wlan_bssid_ex *)&pmlmepriv->cur_network.network;
u8 *ie = pbss_network->ies;
/* SSID */
/* Supported rates */
/* DS Params */
/* WLAN_EID_COUNTRY */
/* ERP Information element */
/* Extended supported rates */
/* WPA/WPA2 */
/* Wi-Fi Wireless Multimedia Extensions */
/* ht_capab, ht_oper */
/* WPS IE */
DBG_88E("%s, len =%d\n", __func__, len);
if (!check_fwstate(pmlmepriv, WIFI_AP_STATE))
return _FAIL;
if (len < 0 || len > MAX_IE_SZ)
return _FAIL;
pbss_network->ie_length = len;
memset(ie, 0, MAX_IE_SZ);
memcpy(ie, pbuf, pbss_network->ie_length);
if (pbss_network->InfrastructureMode != Ndis802_11APMode)
return _FAIL;
pbss_network->Rssi = 0;
ether_addr_copy(pbss_network->MacAddress, myid(&padapter->eeprompriv));
/* beacon interval */
p = rtw_get_beacon_interval_from_ie(ie);/* 8: TimeStamp, 2: Beacon Interval 2:Capability */
pbss_network->Configuration.BeaconPeriod = get_unaligned_le16(p);
/* capability */
cap = get_unaligned_le16(ie);
/* SSID */
p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _SSID_IE_, &ie_len, (pbss_network->ie_length - _BEACON_IE_OFFSET_));
if (p && ie_len > 0) {
memset(&pbss_network->ssid, 0, sizeof(struct ndis_802_11_ssid));
memcpy(pbss_network->ssid.ssid, (p + 2), ie_len);
pbss_network->ssid.ssid_length = ie_len;
}
/* channel */
channel = 0;
pbss_network->Configuration.Length = 0;
p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _DSSET_IE_, &ie_len, (pbss_network->ie_length - _BEACON_IE_OFFSET_));
if (p && ie_len > 0)
channel = *(p + 2);
pbss_network->Configuration.DSConfig = channel;
memset(supportRate, 0, NDIS_802_11_LENGTH_RATES_EX);
/* get supported rates */
p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _SUPPORTEDRATES_IE_, &ie_len, (pbss_network->ie_length - _BEACON_IE_OFFSET_));
if (p) {
memcpy(supportRate, p + 2, ie_len);
supportRateNum = ie_len;
}
/* get ext_supported rates */
p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _EXT_SUPPORTEDRATES_IE_, &ie_len, pbss_network->ie_length - _BEACON_IE_OFFSET_);
if (p) {
memcpy(supportRate + supportRateNum, p + 2, ie_len);
supportRateNum += ie_len;
}
network_type = rtw_check_network_type(supportRate, supportRateNum, channel);
rtw_set_supported_rate(pbss_network->SupportedRates, network_type);
/* parsing ERP_IE */
p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _ERPINFO_IE_, &ie_len, (pbss_network->ie_length - _BEACON_IE_OFFSET_));
if (p && ie_len > 0)
ERP_IE_handler(padapter, (struct ndis_802_11_var_ie *)p);
/* update privacy/security */
if (cap & BIT(4))
pbss_network->Privacy = 1;
else
pbss_network->Privacy = 0;
psecuritypriv->wpa_psk = 0;
/* wpa2 */
group_cipher = 0;
pairwise_cipher = 0;
psecuritypriv->wpa2_group_cipher = _NO_PRIVACY_;
psecuritypriv->wpa2_pairwise_cipher = _NO_PRIVACY_;
p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _RSN_IE_2_, &ie_len, (pbss_network->ie_length - _BEACON_IE_OFFSET_));
if (p && ie_len > 0) {
if (rtw_parse_wpa2_ie(p, ie_len + 2, &group_cipher, &pairwise_cipher, NULL) == _SUCCESS) {
psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_8021X;
psecuritypriv->dot8021xalg = 1;/* psk, todo:802.1x */
psecuritypriv->wpa_psk |= BIT(1);
psecuritypriv->wpa2_group_cipher = group_cipher;
psecuritypriv->wpa2_pairwise_cipher = pairwise_cipher;
}
}
/* wpa */
ie_len = 0;
group_cipher = 0;
pairwise_cipher = 0;
psecuritypriv->wpa_group_cipher = _NO_PRIVACY_;
psecuritypriv->wpa_pairwise_cipher = _NO_PRIVACY_;
for (p = ie + _BEACON_IE_OFFSET_;; p += (ie_len + 2)) {
p = rtw_get_ie(p, _SSN_IE_1_, &ie_len,
(pbss_network->ie_length - _BEACON_IE_OFFSET_ - (ie_len + 2)));
if ((p) && (!memcmp(p + 2, OUI1, 4))) {
if (rtw_parse_wpa_ie(p, ie_len + 2, &group_cipher,
&pairwise_cipher, NULL) == _SUCCESS) {
psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_8021X;
psecuritypriv->dot8021xalg = 1;/* psk, todo:802.1x */
psecuritypriv->wpa_psk |= BIT(0);
psecuritypriv->wpa_group_cipher = group_cipher;
psecuritypriv->wpa_pairwise_cipher = pairwise_cipher;
}
break;
}
if ((!p) || (ie_len == 0))
break;
}
/* wmm */
ie_len = 0;
pmlmepriv->qospriv.qos_option = 0;
if (pregistrypriv->wmm_enable) {
for (p = ie + _BEACON_IE_OFFSET_;; p += (ie_len + 2)) {
p = rtw_get_ie(p, _VENDOR_SPECIFIC_IE_, &ie_len,
(pbss_network->ie_length - _BEACON_IE_OFFSET_ - (ie_len + 2)));
if ((p) && !memcmp(p + 2, WMM_PARA_IE, 6)) {
pmlmepriv->qospriv.qos_option = 1;
/* QoS Info, support U-APSD */
*(p + 8) |= BIT(7);
/* disable all ACM bits since the WMM
* admission control is not supported
*/
*(p + 10) &= ~BIT(4); /* BE */
*(p + 14) &= ~BIT(4); /* BK */
*(p + 18) &= ~BIT(4); /* VI */
*(p + 22) &= ~BIT(4); /* VO */
break;
}
if ((!p) || (ie_len == 0))
break;
}
}
/* parsing HT_CAP_IE */
p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _HT_CAPABILITY_IE_, &ie_len,
(pbss_network->ie_length - _BEACON_IE_OFFSET_));
if (p && ie_len > 0) {
struct ieee80211_ht_cap *pht_cap = (struct ieee80211_ht_cap *)(p + 2);
pHT_caps_ie = p;
ht_cap = true;
network_type |= WIRELESS_11_24N;
if ((psecuritypriv->wpa_pairwise_cipher & WPA_CIPHER_CCMP) ||
(psecuritypriv->wpa2_pairwise_cipher & WPA_CIPHER_CCMP))
pht_cap->ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_DENSITY & (0x07 << 2));
else
pht_cap->ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_DENSITY & 0x00);
/* set Max Rx AMPDU size to 64K */
pht_cap->ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_FACTOR & 0x03);
pht_cap->mcs.rx_mask[0] = 0xff;
pht_cap->mcs.rx_mask[1] = 0x0;
memcpy(&pmlmepriv->htpriv.ht_cap, p + 2, ie_len);
}
/* parsing HT_INFO_IE */
p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _HT_ADD_INFO_IE_, &ie_len,
(pbss_network->ie_length - _BEACON_IE_OFFSET_));
if (p && ie_len > 0)
pHT_info_ie = p;
switch (network_type) {
case WIRELESS_11B:
pbss_network->NetworkTypeInUse = Ndis802_11DS;
break;
case WIRELESS_11G:
case WIRELESS_11BG:
case WIRELESS_11G_24N:
case WIRELESS_11BG_24N:
pbss_network->NetworkTypeInUse = Ndis802_11OFDM24;
break;
case WIRELESS_11A:
pbss_network->NetworkTypeInUse = Ndis802_11OFDM5;
break;
default:
pbss_network->NetworkTypeInUse = Ndis802_11OFDM24;
break;
}
pmlmepriv->cur_network.network_type = network_type;
pmlmepriv->htpriv.ht_option = false;
if ((psecuritypriv->wpa2_pairwise_cipher & WPA_CIPHER_TKIP) ||
(psecuritypriv->wpa_pairwise_cipher & WPA_CIPHER_TKIP)) {
/* todo: */
/* ht_cap = false; */
}
/* ht_cap */
if (pregistrypriv->ht_enable && ht_cap) {
pmlmepriv->htpriv.ht_option = true;
pmlmepriv->qospriv.qos_option = 1;
if (pregistrypriv->ampdu_enable == 1)
pmlmepriv->htpriv.ampdu_enable = true;
HT_caps_handler(padapter, (struct ndis_802_11_var_ie *)pHT_caps_ie);
HT_info_handler(padapter, (struct ndis_802_11_var_ie *)pHT_info_ie);
}
pbss_network->Length = get_wlan_bssid_ex_sz((struct wlan_bssid_ex *)pbss_network);
/* issue beacon to start bss network */
start_bss_network(padapter, (u8 *)pbss_network);
/* alloc sta_info for ap itself */
psta = rtw_get_stainfo(&padapter->stapriv, pbss_network->MacAddress);
if (!psta) {
psta = rtw_alloc_stainfo(&padapter->stapriv, pbss_network->MacAddress);
if (!psta)
return _FAIL;
}
/* fix bug of flush_cam_entry at STOP AP mode */
psta->state |= WIFI_AP_STATE;
rtw_indicate_connect(padapter);
pmlmepriv->cur_network.join_res = true;/* for check if already set beacon */
return ret;
}
/*
* Be careful, ELD buf could be totally rubbish!
*/
int snd_hdmi_parse_eld(struct parsed_hdmi_eld *e,
const unsigned char *buf, int size)
{
int mnl;
int i;
e->eld_ver = GRAB_BITS(buf, 0, 3, 5);
if (e->eld_ver != ELD_VER_CEA_861D &&
e->eld_ver != ELD_VER_PARTIAL) {
snd_printd(KERN_INFO "HDMI: Unknown ELD version %d\n",
e->eld_ver);
goto out_fail;
}
e->baseline_len = GRAB_BITS(buf, 2, 0, 8);
mnl = GRAB_BITS(buf, 4, 0, 5);
e->cea_edid_ver = GRAB_BITS(buf, 4, 5, 3);
e->support_hdcp = GRAB_BITS(buf, 5, 0, 1);
e->support_ai = GRAB_BITS(buf, 5, 1, 1);
e->conn_type = GRAB_BITS(buf, 5, 2, 2);
e->sad_count = GRAB_BITS(buf, 5, 4, 4);
e->aud_synch_delay = GRAB_BITS(buf, 6, 0, 8) * 2;
e->spk_alloc = GRAB_BITS(buf, 7, 0, 7);
e->port_id = get_unaligned_le64(buf + 8);
/* not specified, but the spec's tendency is little endian */
e->manufacture_id = get_unaligned_le16(buf + 16);
e->product_id = get_unaligned_le16(buf + 18);
if (mnl > ELD_MAX_MNL) {
snd_printd(KERN_INFO "HDMI: MNL is reserved value %d\n", mnl);
goto out_fail;
} else if (ELD_FIXED_BYTES + mnl > size) {
snd_printd(KERN_INFO "HDMI: out of range MNL %d\n", mnl);
goto out_fail;
} else
strlcpy(e->monitor_name, buf + ELD_FIXED_BYTES, mnl + 1);
for (i = 0; i < e->sad_count; i++) {
if (ELD_FIXED_BYTES + mnl + 3 * (i + 1) > size) {
snd_printd(KERN_INFO "HDMI: out of range SAD %d\n", i);
goto out_fail;
}
hdmi_update_short_audio_desc(e->sad + i,
buf + ELD_FIXED_BYTES + mnl + 3 * i);
}
/*
* HDMI sink's ELD info cannot always be retrieved for now, e.g.
* in console or for audio devices. Assume the highest speakers
* configuration, to _not_ prohibit multi-channel audio playback.
*/
if (!e->spk_alloc)
e->spk_alloc = 0xffff;
return 0;
out_fail:
return -EINVAL;
}
static inline u32 u16_field_get(const u8 *preq_elem, int offset, bool ae)
{
if (ae)
offset += 6;
return get_unaligned_le16(preq_elem + offset);
}
static int
kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
/*
* Our task here is to strip off framing, leaving skb with one
* data frame for the usbnet framework code to process.
*/
const static u8 HEADER_END_OF_USB_PACKET[] =
{ 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 };
const static u8 EXPECTED_UNKNOWN_HEADER_1[] =
{ 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 };
const static u8 EXPECTED_UNKNOWN_HEADER_2[] =
{ 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 };
int i = 0;
/* incomplete header? */
if (skb->len < KALMIA_HEADER_LENGTH)
return 0;
do {
struct sk_buff *skb2 = NULL;
u8 *header_start;
u16 usb_packet_length, ether_packet_length;
int is_last;
header_start = skb->data;
if (unlikely(header_start[0] != 0x57 || header_start[1] != 0x44)) {
if (!memcmp(header_start, EXPECTED_UNKNOWN_HEADER_1,
sizeof(EXPECTED_UNKNOWN_HEADER_1)) || !memcmp(
header_start, EXPECTED_UNKNOWN_HEADER_2,
sizeof(EXPECTED_UNKNOWN_HEADER_2))) {
netdev_dbg(
dev->net,
"Received expected unknown frame header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n",
header_start[0], header_start[1],
header_start[2], header_start[3],
header_start[4], header_start[5],
skb->len - KALMIA_HEADER_LENGTH);
}
else {
netdev_err(
dev->net,
"Received unknown frame header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n",
header_start[0], header_start[1],
header_start[2], header_start[3],
header_start[4], header_start[5],
skb->len - KALMIA_HEADER_LENGTH);
return 0;
}
}
else
netdev_dbg(
dev->net,
"Received header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n",
header_start[0], header_start[1], header_start[2],
header_start[3], header_start[4], header_start[5],
skb->len - KALMIA_HEADER_LENGTH);
/* subtract start header and end header */
usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH);
ether_packet_length = get_unaligned_le16(&header_start[2]);
skb_pull(skb, KALMIA_HEADER_LENGTH);
/* Some small packets misses end marker */
if (usb_packet_length < ether_packet_length) {
ether_packet_length = usb_packet_length
+ KALMIA_HEADER_LENGTH;
is_last = true;
}
else {
netdev_dbg(dev->net, "Correct package length #%i", i
+ 1);
is_last = (memcmp(skb->data + ether_packet_length,
HEADER_END_OF_USB_PACKET,
sizeof(HEADER_END_OF_USB_PACKET)) == 0);
if (!is_last) {
header_start = skb->data + ether_packet_length;
netdev_dbg(
dev->net,
"End header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n",
header_start[0], header_start[1],
header_start[2], header_start[3],
header_start[4], header_start[5],
skb->len - KALMIA_HEADER_LENGTH);
}
}
if (is_last) {
skb2 = skb;
}
else {
skb2 = skb_clone(skb, GFP_ATOMIC);
if (unlikely(!skb2))
return 0;
}
skb_trim(skb2, ether_packet_length);
if (is_last) {
return 1;
}
else {
usbnet_skb_return(dev, skb2);
skb_pull(skb, ether_packet_length);
}
i++;
}
while (skb->len);
return 1;
}
int ieee80211_radiotap_iterator_next(
struct ieee80211_radiotap_iterator *iterator)
{
while (1) {
int hit = 0;
int pad, align, size, subns;
guint32 oui;
/* if no more EXT bits, that's it */
if ((iterator->_arg_index % 32) == IEEE80211_RADIOTAP_EXT &&
!(iterator->_bitmap_shifter & 1))
return -ENOENT;
if (!(iterator->_bitmap_shifter & 1))
goto next_entry; /* arg not present */
/* get alignment/size of data */
switch (iterator->_arg_index % 32) {
case IEEE80211_RADIOTAP_RADIOTAP_NAMESPACE:
case IEEE80211_RADIOTAP_EXT:
align = 1;
size = 0;
break;
case IEEE80211_RADIOTAP_VENDOR_NAMESPACE:
align = 2;
size = 6;
break;
default:
#ifdef RADIOTAP_SUPPORT_OVERRIDES
if (find_override(iterator, &align, &size)) {
/* all set */
} else
#endif
if (!iterator->current_namespace ||
iterator->_arg_index >= iterator->current_namespace->n_bits) {
if (iterator->current_namespace == &radiotap_ns)
return -ENOENT;
align = 0;
} else {
align = iterator->current_namespace->align_size[iterator->_arg_index].align;
size = iterator->current_namespace->align_size[iterator->_arg_index].size;
}
if (!align) {
/* skip all subsequent data */
iterator->_arg = iterator->_next_ns_data;
/* give up on this namespace */
iterator->current_namespace = NULL;
goto next_entry;
}
break;
}
/*
* arg is present, account for alignment padding
*
* Note that these alignments are relative to the start
* of the radiotap header. There is no guarantee
* that the radiotap header itself is aligned on any
* kind of boundary.
*
* The above is why get_unaligned() is used to dereference
* multibyte elements from the radiotap area.
*/
pad = (int)((iterator->_arg - (unsigned char *)iterator->_rtheader) & (align - 1));
if (pad)
iterator->_arg += align - pad;
if (iterator->_arg_index % 32 == IEEE80211_RADIOTAP_VENDOR_NAMESPACE) {
int vnslen;
if (!ITERATOR_VALID(iterator, size))
return -EINVAL;
oui = (*iterator->_arg << 16) |
(*(iterator->_arg + 1) << 8) |
*(iterator->_arg + 2);
subns = *(iterator->_arg + 3);
find_ns(iterator, oui, subns);
vnslen = get_unaligned_le16(iterator->_arg + 4);
iterator->_next_ns_data = iterator->_arg + size + vnslen;
if (!iterator->current_namespace)
size += vnslen;
}
/*
* this is what we will return to user, but we need to
* move on first so next call has something fresh to test
*/
iterator->this_arg_index = iterator->_arg_index;
iterator->this_arg = iterator->_arg;
iterator->this_arg_size = size;
/* internally move on the size of this arg */
iterator->_arg += size;
/*
* check for insanity where we are given a bitmap that
* claims to have more arg content than the length of the
* radiotap section. We will normally end up equalling this
* max_length on the last arg, never exceeding it.
*/
if (!ITERATOR_VALID(iterator, 0))
return -EINVAL;
/* these special ones are valid in each bitmap word */
switch (iterator->_arg_index % 32) {
case IEEE80211_RADIOTAP_VENDOR_NAMESPACE:
iterator->_reset_on_ext = 1;
iterator->is_radiotap_ns = 0;
/*
* If parser didn't register this vendor
* namespace with us, allow it to show it
* as 'raw. Do do that, set argument index
* to vendor namespace.
*/
iterator->this_arg_index =
IEEE80211_RADIOTAP_VENDOR_NAMESPACE;
if (!iterator->current_namespace)
hit = 1;
goto next_entry;
case IEEE80211_RADIOTAP_RADIOTAP_NAMESPACE:
iterator->_reset_on_ext = 1;
iterator->current_namespace = &radiotap_ns;
iterator->is_radiotap_ns = 1;
goto next_entry;
case IEEE80211_RADIOTAP_EXT:
/*
* bit 31 was set, there is more
* -- move to next u32 bitmap
*/
iterator->_bitmap_shifter =
get_unaligned_le32(iterator->_next_bitmap);
iterator->_next_bitmap++;
if (iterator->_reset_on_ext)
iterator->_arg_index = 0;
else
iterator->_arg_index++;
iterator->_reset_on_ext = 0;
break;
default:
/* we've got a hit! */
hit = 1;
next_entry:
iterator->_bitmap_shifter >>= 1;
iterator->_arg_index++;
}
/* if we found a valid arg earlier, return it now */
if (hit)
return 0;
}
}
/*
* Interface Descriptor of wacom devices can be incomplete and
* inconsistent so wacom_features table is used to store stylus
* device's packet lengths, various maximum values, and tablet
* resolution based on product ID's.
*
* For devices that contain 2 interfaces, wacom_features table is
* inaccurate for the touch interface. Since the Interface Descriptor
* for touch interfaces has pretty complete data, this function exists
* to query tablet for this missing information instead of hard coding in
* an additional table.
*
* A typical Interface Descriptor for a stylus will contain a
* boot mouse application collection that is not of interest and this
* function will ignore it.
*
* It also contains a digitizer application collection that also is not
* of interest since any information it contains would be duplicate
* of what is in wacom_features. Usually it defines a report of an array
* of bytes that could be used as max length of the stylus packet returned.
* If it happens to define a Digitizer-Stylus Physical Collection then
* the X and Y logical values contain valid data but it is ignored.
*
* A typical Interface Descriptor for a touch interface will contain a
* Digitizer-Finger Physical Collection which will define both logical
* X/Y maximum as well as the physical size of tablet. Since touch
* interfaces haven't supported pressure or distance, this is enough
* information to override invalid values in the wacom_features table.
*
* 3rd gen Bamboo Touch no longer define a Digitizer-Finger Pysical
* Collection. Instead they define a Logical Collection with a single
* Logical Maximum for both X and Y.
*/
static int wacom_parse_hid(struct usb_interface *intf,
struct hid_descriptor *hid_desc,
struct wacom_features *features)
{
struct usb_device *dev = interface_to_usbdev(intf);
char limit = 0;
/* result has to be defined as int for some devices */
int result = 0;
int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0;
unsigned char *report;
report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
if (!report)
return -ENOMEM;
/* retrive report descriptors */
do {
result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
USB_REQ_GET_DESCRIPTOR,
USB_RECIP_INTERFACE | USB_DIR_IN,
HID_DEVICET_REPORT << 8,
intf->altsetting[0].desc.bInterfaceNumber, /* interface */
report,
hid_desc->wDescriptorLength,
5000); /* 5 secs */
} while (result < 0 && limit++ < WAC_MSG_RETRIES);
/* No need to parse the Descriptor. It isn't an error though */
if (result < 0)
goto out;
for (i = 0; i < hid_desc->wDescriptorLength; i++) {
switch (report[i]) {
case HID_USAGE_PAGE:
switch (report[i + 1]) {
case HID_USAGE_PAGE_DIGITIZER:
usage = WCM_DIGITIZER;
i++;
break;
case HID_USAGE_PAGE_DESKTOP:
usage = WCM_DESKTOP;
i++;
break;
}
break;
case HID_USAGE:
switch (report[i + 1]) {
case HID_USAGE_X:
if (usage == WCM_DESKTOP) {
if (finger) {
features->device_type = BTN_TOOL_FINGER;
if (features->type == TABLETPC2FG) {
/* need to reset back */
features->pktlen = WACOM_PKGLEN_TPC2FG;
}
if (features->type == BAMBOO_PT) {
/* need to reset back */
features->pktlen = WACOM_PKGLEN_BBTOUCH;
features->x_phy =
get_unaligned_le16(&report[i + 5]);
features->x_max =
get_unaligned_le16(&report[i + 8]);
i += 15;
} else {
features->x_max =
get_unaligned_le16(&report[i + 3]);
features->x_phy =
get_unaligned_le16(&report[i + 6]);
features->unit = report[i + 9];
features->unitExpo = report[i + 11];
i += 12;
}
} else if (pen) {
/* penabled only accepts exact bytes of data */
if (features->type == TABLETPC2FG)
features->pktlen = WACOM_PKGLEN_GRAPHIRE;
features->device_type = BTN_TOOL_PEN;
features->x_max =
get_unaligned_le16(&report[i + 3]);
i += 4;
}
}
break;
case HID_USAGE_Y:
if (usage == WCM_DESKTOP) {
if (finger) {
features->device_type = BTN_TOOL_FINGER;
if (features->type == TABLETPC2FG) {
/* need to reset back */
features->pktlen = WACOM_PKGLEN_TPC2FG;
features->y_max =
get_unaligned_le16(&report[i + 3]);
features->y_phy =
get_unaligned_le16(&report[i + 6]);
i += 7;
} else if (features->type == BAMBOO_PT) {
/* need to reset back */
features->pktlen = WACOM_PKGLEN_BBTOUCH;
features->y_phy =
get_unaligned_le16(&report[i + 3]);
features->y_max =
get_unaligned_le16(&report[i + 6]);
i += 12;
} else {
features->y_max =
features->x_max;
features->y_phy =
get_unaligned_le16(&report[i + 3]);
i += 4;
}
} else if (pen) {
/* penabled only accepts exact bytes of data */
if (features->type == TABLETPC2FG)
features->pktlen = WACOM_PKGLEN_GRAPHIRE;
features->device_type = BTN_TOOL_PEN;
features->y_max =
get_unaligned_le16(&report[i + 3]);
i += 4;
}
}
break;
case HID_USAGE_FINGER:
finger = 1;
i++;
break;
/*
* Requiring Stylus Usage will ignore boot mouse
* X/Y values and some cases of invalid Digitizer X/Y
* values commonly reported.
*/
case HID_USAGE_STYLUS:
pen = 1;
i++;
break;
}
break;
case HID_COLLECTION_END:
/* reset UsagePage and Finger */
finger = usage = 0;
break;
case HID_COLLECTION:
i++;
switch (report[i]) {
case HID_COLLECTION_LOGICAL:
i += wacom_parse_logical_collection(&report[i],
features);
break;
}
break;
}
}
out:
result = 0;
kfree(report);
return result;
}
/*
* URB callback routine. Called when we get IRQ reports from the
* digitizer.
*
* This bridges the USB and input device worlds. It generates events
* on the input device based on the USB reports.
*/
static void gtco_urb_callback(struct urb *urbinfo)
{
struct gtco *device = urbinfo->context;
struct input_dev *inputdev;
int rc;
u32 val = 0;
s8 valsigned = 0;
char le_buffer[2];
inputdev = device->inputdevice;
/* Was callback OK? */
if (urbinfo->status == -ECONNRESET ||
urbinfo->status == -ENOENT ||
urbinfo->status == -ESHUTDOWN) {
/* Shutdown is occurring. Return and don't queue up any more */
return;
}
if (urbinfo->status != 0) {
/*
* Some unknown error. Hopefully temporary. Just go and
* requeue an URB
*/
goto resubmit;
}
/*
* Good URB, now process
*/
/* PID dependent when we interpret the report */
if (inputdev->id.product == PID_1000 ||
inputdev->id.product == PID_1001 ||
inputdev->id.product == PID_1002) {
/*
* Switch on the report ID
* Conveniently, the reports have more information, the higher
* the report number. We can just fall through the case
* statements if we start with the highest number report
*/
switch (device->buffer[0]) {
case 5:
/* Pressure is 9 bits */
val = ((u16)(device->buffer[8]) << 1);
val |= (u16)(device->buffer[7] >> 7);
input_report_abs(inputdev, ABS_PRESSURE,
device->buffer[8]);
/* Mask out the Y tilt value used for pressure */
device->buffer[7] = (u8)((device->buffer[7]) & 0x7F);
/* Fall thru */
case 4:
/* Tilt */
/* Sign extend these 7 bit numbers. */
if (device->buffer[6] & 0x40)
device->buffer[6] |= 0x80;
if (device->buffer[7] & 0x40)
device->buffer[7] |= 0x80;
valsigned = (device->buffer[6]);
input_report_abs(inputdev, ABS_TILT_X, (s32)valsigned);
valsigned = (device->buffer[7]);
input_report_abs(inputdev, ABS_TILT_Y, (s32)valsigned);
/* Fall thru */
case 2:
case 3:
/* Convert buttons, only 5 bits possible */
val = (device->buffer[5]) & MASK_BUTTON;
/* We don't apply any meaning to the bitmask,
just report */
input_event(inputdev, EV_MSC, MSC_SERIAL, val);
/* Fall thru */
case 1:
/* All reports have X and Y coords in the same place */
val = get_unaligned_le16(&device->buffer[1]);
input_report_abs(inputdev, ABS_X, val);
val = get_unaligned_le16(&device->buffer[3]);
input_report_abs(inputdev, ABS_Y, val);
/* Ditto for proximity bit */
val = device->buffer[5] & MASK_INRANGE ? 1 : 0;
input_report_abs(inputdev, ABS_DISTANCE, val);
/* Report 1 is an exception to how we handle buttons */
/* Buttons are an index, not a bitmask */
if (device->buffer[0] == 1) {
/*
* Convert buttons, 5 bit index
* Report value of index set as one,
* the rest as 0
*/
val = device->buffer[5] & MASK_BUTTON;
dev_dbg(&device->intf->dev,
"======>>>>>>REPORT 1: val 0x%X(%d)\n",
val, val);
/*
* We don't apply any meaning to the button
* index, just report it
*/
input_event(inputdev, EV_MSC, MSC_SERIAL, val);
}
break;
case 7:
/* Menu blocks */
input_event(inputdev, EV_MSC, MSC_SCAN,
device->buffer[1]);
break;
}
}
/* Other pid class */
if (inputdev->id.product == PID_400 ||
inputdev->id.product == PID_401) {
/* Report 2 */
if (device->buffer[0] == 2) {
/* Menu blocks */
input_event(inputdev, EV_MSC, MSC_SCAN, device->buffer[1]);
}
/* Report 1 */
if (device->buffer[0] == 1) {
char buttonbyte;
/* IF X max > 64K, we still a bit from the y report */
if (device->max_X > 0x10000) {
val = (u16)(((u16)(device->buffer[2] << 8)) | (u8)device->buffer[1]);
val |= (u32)(((u8)device->buffer[3] & 0x1) << 16);
input_report_abs(inputdev, ABS_X, val);
le_buffer[0] = (u8)((u8)(device->buffer[3]) >> 1);
le_buffer[0] |= (u8)((device->buffer[3] & 0x1) << 7);
le_buffer[1] = (u8)(device->buffer[4] >> 1);
le_buffer[1] |= (u8)((device->buffer[5] & 0x1) << 7);
val = get_unaligned_le16(le_buffer);
input_report_abs(inputdev, ABS_Y, val);
/*
* Shift the button byte right by one to
* make it look like the standard report
*/
buttonbyte = device->buffer[5] >> 1;
} else {
/* control interface reports status changes with "interrupt" transfers */
static void acm_ctrl_irq(struct urb *urb)
{
struct acm *acm = urb->context;
struct usb_cdc_notification *dr = urb->transfer_buffer;
unsigned char *data;
int newctrl;
int retval;
int status = urb->status;
switch (status) {
case 0:
/* success */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d", __func__, status);
return;
default:
dbg("%s - nonzero urb status received: %d", __func__, status);
goto exit;
}
if (!ACM_READY(acm))
goto exit;
data = (unsigned char *)(dr + 1);
switch (dr->bNotificationType) {
case USB_CDC_NOTIFY_NETWORK_CONNECTION:
dbg("%s network", dr->wValue ? "connected to" : "disconnected from");
break;
case USB_CDC_NOTIFY_SERIAL_STATE:
newctrl = get_unaligned_le16(data);
if (acm->tty && !acm->clocal && (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) {
dbg("calling hangup");
tty_hangup(acm->tty);
}
acm->ctrlin = newctrl;
dbg("input control lines: dcd%c dsr%c break%c ring%c framing%c parity%c overrun%c",
acm->ctrlin & ACM_CTRL_DCD ? '+' : '-', acm->ctrlin & ACM_CTRL_DSR ? '+' : '-',
acm->ctrlin & ACM_CTRL_BRK ? '+' : '-', acm->ctrlin & ACM_CTRL_RI ? '+' : '-',
acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-', acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-',
acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-');
break;
default:
dbg("unknown notification %d received: index %d len %d data0 %d data1 %d",
dr->bNotificationType, dr->wIndex,
dr->wLength, data[0], data[1]);
break;
}
exit:
usb_mark_last_busy(acm->dev);
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with "
"result %d", __func__, retval);
}
struct sk_buff *h4_recv_buf(struct hci_dev *hdev, struct sk_buff *skb,
const unsigned char *buffer, int count,
const struct h4_recv_pkt *pkts, int pkts_count)
{
while (count) {
int i, len;
if (!skb) {
for (i = 0; i < pkts_count; i++) {
if (buffer[0] != (&pkts[i])->type)
continue;
skb = bt_skb_alloc((&pkts[i])->maxlen,
GFP_ATOMIC);
if (!skb)
return ERR_PTR(-ENOMEM);
bt_cb(skb)->pkt_type = (&pkts[i])->type;
bt_cb(skb)->expect = (&pkts[i])->hlen;
break;
}
/* Check for invalid packet type */
if (!skb)
return ERR_PTR(-EILSEQ);
count -= 1;
buffer += 1;
}
len = min_t(uint, bt_cb(skb)->expect - skb->len, count);
memcpy(skb_put(skb, len), buffer, len);
count -= len;
buffer += len;
/* Check for partial packet */
if (skb->len < bt_cb(skb)->expect)
continue;
for (i = 0; i < pkts_count; i++) {
if (bt_cb(skb)->pkt_type == (&pkts[i])->type)
break;
}
if (i >= pkts_count) {
kfree_skb(skb);
return ERR_PTR(-EILSEQ);
}
if (skb->len == (&pkts[i])->hlen) {
u16 dlen;
switch ((&pkts[i])->lsize) {
case 0:
/* No variable data length */
(&pkts[i])->recv(hdev, skb);
skb = NULL;
break;
case 1:
/* Single octet variable length */
dlen = skb->data[(&pkts[i])->loff];
bt_cb(skb)->expect += dlen;
if (skb_tailroom(skb) < dlen) {
kfree_skb(skb);
return ERR_PTR(-EMSGSIZE);
}
break;
case 2:
/* Double octet variable length */
dlen = get_unaligned_le16(skb->data +
(&pkts[i])->loff);
bt_cb(skb)->expect += dlen;
if (skb_tailroom(skb) < dlen) {
kfree_skb(skb);
return ERR_PTR(-EMSGSIZE);
}
break;
default:
/* Unsupported variable length */
kfree_skb(skb);
return ERR_PTR(-EILSEQ);
}
} else {
/* Complete frame */
(&pkts[i])->recv(hdev, skb);
skb = NULL;
}
}
return skb;
}
static irqreturn_t optical_trigger_handler_debug(int irq, void *p)
{
#if 1
#define BAR_LEN (40)
u8 buf[BAR_LEN+2];
int proxData;
#ifdef REDUCED_PROX_RATE
static u8 numOfData=0;
static u32 heartRateSum=0;
#endif
gsdata->tf->read_byte(&gsdata->tb, gsdata->dev, REGS_PS1_DATA0, buf);
gsdata->tf->read_byte(&gsdata->tb, gsdata->dev, REGS_PS1_DATA1, buf+1);
gsdata->tf->read_byte(&gsdata->tb, gsdata->dev, REGS_IRQ_STATUS, buf+2);
proxData = get_unaligned_le16(buf);
if(buf[2]&BIT(2))
{
proxVal = (u8)proxData;
avgData = optical_HR_Average(proxData, 100);
optical_HR_CalcAPW(avgData, 32 , &accData);
optical_HR_DetectPeak(accData, 100, -65, &heart_rate);
#ifdef REDUCED_PROX_RATE
heartRateSum = heartRateSum + (u32)heart_rate;
numOfData = (numOfData+1)%(100/REDUCED_PROX_RATE);//orignal prox rate is 100Hz
if(numOfData==0)
{
heart_rate = (u16)(heartRateSum/(100/REDUCED_PROX_RATE));
heartRateSum = 0;
proxValValid = true;
wake_up(&proxWait);
hrValValid = true;
wake_up(&hrWait);
printk("vung optical_trigger_handler_debug --------------");
}
#else
hrValValid = true;
wake_up(&hrWait);
proxValValid = true;
wake_up(&proxWait);
#endif
//printk (KERN_ALERT "proxData=0x%04x,heartRate=%4d,avg=%4d,acc=%4d",proxData,heart_rate,avgData,accData);
//sysfs_notify(&gsdata->dev->kobj,NULL, "prox_val");
}
if(buf[2]&(BIT(5)))
{
gsdata->tf->read_byte(&gsdata->tb, gsdata->dev, REGS_RESPONSE, buf);
printk (KERN_ALERT "CMD INT: REGS_RESPONSE=0x%x\n",buf[0]);
//sysfs_notify(&gsdata->dev->kobj,NULL, "light_val");
}
/*
if(buf[2]&(BIT(5)))
{
lightVal = (u16)alsData;
lightValValid = true;
wake_up(&lightWait);
//sysfs_notify(&gsdata->dev->kobj,NULL, "light_val");
}
*/
#if 0
int i;
proxData = BAR_LEN*proxData/2000;
for(i=0;((i<proxData)&&(i<BAR_LEN));i++)
{
buf[i]='=';
}
for(;i<BAR_LEN;i++)
{
buf[i]=' ';
}
buf[i] = '\0';
printk (KERN_ALERT "PROX: %s\n",buf);
#endif
#else
u8 i = 16;
u8 regs[16] = {0};
printk (KERN_ALERT "[%s %d]\n", __FUNCTION__,irq);
for(i=0;i<16;i++)
{
gsdata->tf->read_byte(&gsdata->tb, gsdata->dev, i, regs+i);
}
for(i=0;i<16;i++)
printk (KERN_ALERT "optical regs[%d]=%02x\n",i,regs[i]);
#endif
gsdata->tf->write_byte(&gsdata->tb, gsdata->dev, REGS_IRQ_STATUS, 0x27);//clear all
return IRQ_HANDLED;
}
static int m920x_firmware_download(struct usb_device *udev, const struct firmware *fw)
{
u16 value, index, size;
u8 *read, *buff;
int i, pass, ret = 0;
buff = kmalloc(65536, GFP_KERNEL);
if (buff == NULL)
return -ENOMEM;
read = kmalloc(4, GFP_KERNEL);
if (!read) {
kfree(buff);
return -ENOMEM;
}
if ((ret = m920x_read(udev, M9206_FILTER, 0x0, 0x8000, read, 4)) != 0)
goto done;
deb("%*ph\n", 4, read);
if ((ret = m920x_read(udev, M9206_FW, 0x0, 0x0, read, 1)) != 0)
goto done;
deb("%x\n", read[0]);
for (pass = 0; pass < 2; pass++) {
for (i = 0; i + (sizeof(u16) * 3) < fw->size;) {
value = get_unaligned_le16(fw->data + i);
i += sizeof(u16);
index = get_unaligned_le16(fw->data + i);
i += sizeof(u16);
size = get_unaligned_le16(fw->data + i);
i += sizeof(u16);
if (pass == 1) {
/* Will stall if using fw->data ... */
memcpy(buff, fw->data + i, size);
ret = usb_control_msg(udev, usb_sndctrlpipe(udev,0),
M9206_FW,
USB_TYPE_VENDOR | USB_DIR_OUT,
value, index, buff, size, 20);
if (ret != size) {
deb("error while uploading fw!\n");
ret = -EIO;
goto done;
}
msleep(3);
}
i += size;
}
if (i != fw->size) {
deb("bad firmware file!\n");
ret = -EINVAL;
goto done;
}
}
msleep(36);
/* m920x will disconnect itself from the bus after this. */
(void) m920x_write(udev, M9206_CORE, 0x01, M9206_FW_GO);
deb("firmware uploaded!\n");
done:
kfree(read);
kfree(buff);
return ret;
}
static void
mt76x2_apply_cal_free_data(struct mt76x2_dev *dev, u8 *efuse)
{
#define GROUP_5G(_id) \
MT_EE_TX_POWER_0_START_5G + MT_TX_POWER_GROUP_SIZE_5G * (_id), \
MT_EE_TX_POWER_0_START_5G + MT_TX_POWER_GROUP_SIZE_5G * (_id) + 1, \
MT_EE_TX_POWER_1_START_5G + MT_TX_POWER_GROUP_SIZE_5G * (_id), \
MT_EE_TX_POWER_1_START_5G + MT_TX_POWER_GROUP_SIZE_5G * (_id) + 1
static const u8 cal_free_bytes[] = {
MT_EE_XTAL_TRIM_1,
MT_EE_TX_POWER_EXT_PA_5G + 1,
MT_EE_TX_POWER_0_START_2G,
MT_EE_TX_POWER_0_START_2G + 1,
MT_EE_TX_POWER_1_START_2G,
MT_EE_TX_POWER_1_START_2G + 1,
GROUP_5G(0),
GROUP_5G(1),
GROUP_5G(2),
GROUP_5G(3),
GROUP_5G(4),
GROUP_5G(5),
MT_EE_RF_2G_TSSI_OFF_TXPOWER,
MT_EE_RF_2G_RX_HIGH_GAIN + 1,
MT_EE_RF_5G_GRP0_1_RX_HIGH_GAIN,
MT_EE_RF_5G_GRP0_1_RX_HIGH_GAIN + 1,
MT_EE_RF_5G_GRP2_3_RX_HIGH_GAIN,
MT_EE_RF_5G_GRP2_3_RX_HIGH_GAIN + 1,
MT_EE_RF_5G_GRP4_5_RX_HIGH_GAIN,
MT_EE_RF_5G_GRP4_5_RX_HIGH_GAIN + 1,
};
u8 *eeprom = dev->mt76.eeprom.data;
u8 prev_grp0[4] = {
eeprom[MT_EE_TX_POWER_0_START_5G],
eeprom[MT_EE_TX_POWER_0_START_5G + 1],
eeprom[MT_EE_TX_POWER_1_START_5G],
eeprom[MT_EE_TX_POWER_1_START_5G + 1]
};
u16 val;
int i;
if (!mt76x2_has_cal_free_data(dev, efuse))
return;
for (i = 0; i < ARRAY_SIZE(cal_free_bytes); i++) {
int offset = cal_free_bytes[i];
eeprom[offset] = efuse[offset];
}
if (!(efuse[MT_EE_TX_POWER_0_START_5G] |
efuse[MT_EE_TX_POWER_0_START_5G + 1]))
memcpy(eeprom + MT_EE_TX_POWER_0_START_5G, prev_grp0, 2);
if (!(efuse[MT_EE_TX_POWER_1_START_5G] |
efuse[MT_EE_TX_POWER_1_START_5G + 1]))
memcpy(eeprom + MT_EE_TX_POWER_1_START_5G, prev_grp0 + 2, 2);
val = get_unaligned_le16(efuse + MT_EE_BT_RCAL_RESULT);
if (val != 0xffff)
eeprom[MT_EE_BT_RCAL_RESULT] = val & 0xff;
val = get_unaligned_le16(efuse + MT_EE_BT_VCDL_CALIBRATION);
if (val != 0xffff)
eeprom[MT_EE_BT_VCDL_CALIBRATION + 1] = val >> 8;
val = get_unaligned_le16(efuse + MT_EE_BT_PMUCFG);
if (val != 0xffff)
eeprom[MT_EE_BT_PMUCFG] = val & 0xff;
}
le_buffer[0] |= (u8)((device->buffer[3] & 0x1) << 7);
le_buffer[1] = (u8)(device->buffer[4] >> 1);
le_buffer[1] |= (u8)((device->buffer[5] & 0x1) << 7);
val = get_unaligned_le16(le_buffer);
input_report_abs(inputdev, ABS_Y, val);
/*
* Shift the button byte right by one to
* make it look like the standard report
*/
buttonbyte = device->buffer[5] >> 1;
} else {
val = get_unaligned_le16(&device->buffer[1]);
input_report_abs(inputdev, ABS_X, val);
val = get_unaligned_le16(&device->buffer[3]);
input_report_abs(inputdev, ABS_Y, val);
buttonbyte = device->buffer[5];
}
/* BUTTONS and PROXIMITY */
val = buttonbyte & MASK_INRANGE ? 1 : 0;
input_report_abs(inputdev, ABS_DISTANCE, val);
/* Convert buttons, only 4 bits possible */
val = buttonbyte & 0x0F;
#ifdef USE_BUTTONS
/*
* Return the battery Relative State-of-Charge
* Or < 0 if something fails.
*/
static int bq27541_battery_rsoc(struct bq27541_device_info *di)
{
int ret;
int rsoc = 0;
#if 0
int nvcap = 0,facap = 0,remcap=0,fccap=0,full=0,cnt=0;
int art = 0, artte = 0, ai = 0, tte = 0, ttf = 0, si = 0;
int stte = 0, mli = 0, mltte = 0, ae = 0, ap = 0, ttecp = 0, cc = 0;
#endif
u8 buf[2];
#if defined (CONFIG_NO_BATTERY_IC)
return 100;
#endif
if(virtual_battery_enable == 1)
return 50/*100*/;
ret = bq27541_read(di->client,BQ27500_REG_SOC,buf,2);
if (ret<0) {
dev_err(di->dev, "error reading relative State-of-Charge\n");
return ret;
}
rsoc = get_unaligned_le16(buf);
DBG("Enter:%s %d--rsoc = %d\n",__FUNCTION__,__LINE__,rsoc);
#if defined (CONFIG_NO_BATTERY_IC)
rsoc = 100;
#endif
#if 0 //other register information, for debug use
ret = bq27541_read(di->client,0x0c,buf,2); //NominalAvailableCapacity
nvcap = get_unaligned_le16(buf);
DBG("\nEnter:%s %d--nvcap = %d\n",__FUNCTION__,__LINE__,nvcap);
ret = bq27541_read(di->client,0x0e,buf,2); //FullAvailableCapacity
facap = get_unaligned_le16(buf);
DBG("Enter:%s %d--facap = %d\n",__FUNCTION__,__LINE__,facap);
ret = bq27541_read(di->client,0x10,buf,2); //RemainingCapacity
remcap = get_unaligned_le16(buf);
DBG("Enter:%s %d--remcap = %d\n",__FUNCTION__,__LINE__,remcap);
ret = bq27541_read(di->client,0x12,buf,2); //FullChargeCapacity
fccap = get_unaligned_le16(buf);
DBG("Enter:%s %d--fccap = %d\n",__FUNCTION__,__LINE__,fccap);
ret = bq27541_read(di->client,0x3c,buf,2); //DesignCapacity
full = get_unaligned_le16(buf);
DBG("Enter:%s %d--DesignCapacity = %d\n",__FUNCTION__,__LINE__,full);
buf[0] = 0x00; //CONTROL_STATUS
buf[1] = 0x00;
bq27541_write(di->client,0x00,buf,2);
ret = bq27541_read(di->client,0x00,buf,2);
cnt = get_unaligned_le16(buf);
DBG("Enter:%s %d--Control status = %x\n",__FUNCTION__,__LINE__,cnt);
ret = bq27541_read(di->client,0x02,buf,2); //AtRate
art = get_unaligned_le16(buf);
DBG("Enter:%s %d--AtRate = %d\n",__FUNCTION__,__LINE__,art);
ret = bq27541_read(di->client,0x04,buf,2); //AtRateTimeToEmpty
artte = get_unaligned_le16(buf);
DBG("Enter:%s %d--AtRateTimeToEmpty = %d\n",__FUNCTION__,__LINE__,artte);
ret = bq27541_read(di->client,0x14,buf,2); //AverageCurrent
ai = get_unaligned_le16(buf);
DBG("Enter:%s %d--AverageCurrent = %d\n",__FUNCTION__,__LINE__,ai);
ret = bq27541_read(di->client,0x16,buf,2); //TimeToEmpty
tte = get_unaligned_le16(buf);
DBG("Enter:%s %d--TimeToEmpty = %d\n",__FUNCTION__,__LINE__,tte);
ret = bq27541_read(di->client,0x18,buf,2); //TimeToFull
ttf = get_unaligned_le16(buf);
DBG("Enter:%s %d--TimeToFull = %d\n",__FUNCTION__,__LINE__,ttf);
ret = bq27541_read(di->client,0x1a,buf,2); //StandbyCurrent
si = get_unaligned_le16(buf);
DBG("Enter:%s %d--StandbyCurrent = %d\n",__FUNCTION__,__LINE__,si);
ret = bq27541_read(di->client,0x1c,buf,2); //StandbyTimeToEmpty
stte = get_unaligned_le16(buf);
DBG("Enter:%s %d--StandbyTimeToEmpty = %d\n",__FUNCTION__,__LINE__,stte);
ret = bq27541_read(di->client,0x1e,buf,2); //MaxLoadCurrent
mli = get_unaligned_le16(buf);
DBG("Enter:%s %d--MaxLoadCurrent = %d\n",__FUNCTION__,__LINE__,mli);
ret = bq27541_read(di->client,0x20,buf,2); //MaxLoadTimeToEmpty
mltte = get_unaligned_le16(buf);
DBG("Enter:%s %d--MaxLoadTimeToEmpty = %d\n",__FUNCTION__,__LINE__,mltte);
ret = bq27541_read(di->client,0x22,buf,2); //AvailableEnergy
ae = get_unaligned_le16(buf);
DBG("Enter:%s %d--AvailableEnergy = %d\n",__FUNCTION__,__LINE__,ae);
ret = bq27541_read(di->client,0x24,buf,2); //AveragePower
ap = get_unaligned_le16(buf);
DBG("Enter:%s %d--AveragePower = %d\n",__FUNCTION__,__LINE__,ap);
ret = bq27541_read(di->client,0x26,buf,2); //TTEatConstantPower
ttecp = get_unaligned_le16(buf);
DBG("Enter:%s %d--TTEatConstantPower = %d\n",__FUNCTION__,__LINE__,ttecp);
ret = bq27541_read(di->client,0x2a,buf,2); //CycleCount
cc = get_unaligned_le16(buf);
DBG("Enter:%s %d--CycleCount = %d\n",__FUNCTION__,__LINE__,cc);
#endif
return rsoc;
}
/*
* This is an abbreviated parser for the HID Report Descriptor. We
* know what devices we are talking to, so this is by no means meant
* to be generic. We can make some safe assumptions:
*
* - We know there are no LONG tags, all short
* - We know that we have no MAIN Feature and MAIN Output items
* - We know what the IRQ reports are supposed to look like.
*
* The main purpose of this is to use the HID report desc to figure
* out the mins and maxs of the fields in the IRQ reports. The IRQ
* reports for 400/401 change slightly if the max X is bigger than 64K.
*
*/
static void parse_hid_report_descriptor(struct gtco *device, char * report,
int length)
{
struct device *ddev = &device->intf->dev;
int x, i = 0;
/* Tag primitive vars */
__u8 prefix;
__u8 size;
__u8 tag;
__u8 type;
__u8 data = 0;
__u16 data16 = 0;
__u32 data32 = 0;
/* For parsing logic */
int inputnum = 0;
__u32 usage = 0;
/* Global Values, indexed by TAG */
__u32 globalval[TAG_GLOB_MAX];
__u32 oldval[TAG_GLOB_MAX];
/* Debug stuff */
char maintype = 'x';
char globtype[12];
int indent = 0;
char indentstr[10] = "";
dev_dbg(ddev, "======>>>>>>PARSE<<<<<<======\n");
/* Walk this report and pull out the info we need */
while (i < length) {
prefix = report[i];
/* Skip over prefix */
i++;
/* Determine data size and save the data in the proper variable */
size = PREF_SIZE(prefix);
switch (size) {
case 1:
data = report[i];
break;
case 2:
data16 = get_unaligned_le16(&report[i]);
break;
case 3:
size = 4;
data32 = get_unaligned_le32(&report[i]);
break;
}
/* Skip size of data */
i += size;
/* What we do depends on the tag type */
tag = PREF_TAG(prefix);
type = PREF_TYPE(prefix);
switch (type) {
case TYPE_MAIN:
strcpy(globtype, "");
switch (tag) {
case TAG_MAIN_INPUT:
/*
* The INPUT MAIN tag signifies this is
* information from a report. We need to
* figure out what it is and store the
* min/max values
*/
maintype = 'I';
if (data == 2)
strcpy(globtype, "Variable");
else if (data == 3)
strcpy(globtype, "Var|Const");
dev_dbg(ddev, "::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits\n",
globalval[TAG_GLOB_REPORT_ID], inputnum,
globalval[TAG_GLOB_LOG_MAX], globalval[TAG_GLOB_LOG_MAX],
globalval[TAG_GLOB_LOG_MIN], globalval[TAG_GLOB_LOG_MIN],
globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]);
/*
We can assume that the first two input items
are always the X and Y coordinates. After
that, we look for everything else by
local usage value
*/
switch (inputnum) {
case 0: /* X coord */
dev_dbg(ddev, "GER: X Usage: 0x%x\n", usage);
if (device->max_X == 0) {
device->max_X = globalval[TAG_GLOB_LOG_MAX];
device->min_X = globalval[TAG_GLOB_LOG_MIN];
}
break;
case 1: /* Y coord */
dev_dbg(ddev, "GER: Y Usage: 0x%x\n", usage);
if (device->max_Y == 0) {
device->max_Y = globalval[TAG_GLOB_LOG_MAX];
device->min_Y = globalval[TAG_GLOB_LOG_MIN];
}
break;
default:
/* Tilt X */
if (usage == DIGITIZER_USAGE_TILT_X) {
if (device->maxtilt_X == 0) {
device->maxtilt_X = globalval[TAG_GLOB_LOG_MAX];
device->mintilt_X = globalval[TAG_GLOB_LOG_MIN];
}
}
/* Tilt Y */
if (usage == DIGITIZER_USAGE_TILT_Y) {
if (device->maxtilt_Y == 0) {
device->maxtilt_Y = globalval[TAG_GLOB_LOG_MAX];
device->mintilt_Y = globalval[TAG_GLOB_LOG_MIN];
}
}
/* Pressure */
if (usage == DIGITIZER_USAGE_TIP_PRESSURE) {
if (device->maxpressure == 0) {
device->maxpressure = globalval[TAG_GLOB_LOG_MAX];
device->minpressure = globalval[TAG_GLOB_LOG_MIN];
}
}
break;
}
inputnum++;
break;
case TAG_MAIN_OUTPUT:
maintype = 'O';
break;
case TAG_MAIN_FEATURE:
maintype = 'F';
break;
case TAG_MAIN_COL_START:
maintype = 'S';
if (data == 0) {
dev_dbg(ddev, "======>>>>>> Physical\n");
strcpy(globtype, "Physical");
} else
dev_dbg(ddev, "======>>>>>>\n");
/* Indent the debug output */
indent++;
for (x = 0; x < indent; x++)
indentstr[x] = '-';
indentstr[x] = 0;
/* Save global tags */
for (x = 0; x < TAG_GLOB_MAX; x++)
oldval[x] = globalval[x];
break;
case TAG_MAIN_COL_END:
dev_dbg(ddev, "<<<<<<======\n");
maintype = 'E';
indent--;
for (x = 0; x < indent; x++)
indentstr[x] = '-';
indentstr[x] = 0;
/* Copy global tags back */
for (x = 0; x < TAG_GLOB_MAX; x++)
globalval[x] = oldval[x];
break;
}
switch (size) {
case 1:
dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n",
indentstr, tag, maintype, size, globtype, data);
break;
case 2:
dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n",
indentstr, tag, maintype, size, globtype, data16);
break;
case 4:
dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n",
indentstr, tag, maintype, size, globtype, data32);
break;
}
break;
case TYPE_GLOBAL:
switch (tag) {
case TAG_GLOB_USAGE:
/*
* First time we hit the global usage tag,
* it should tell us the type of device
*/
if (device->usage == 0)
device->usage = data;
strcpy(globtype, "USAGE");
break;
case TAG_GLOB_LOG_MIN:
strcpy(globtype, "LOG_MIN");
break;
case TAG_GLOB_LOG_MAX:
strcpy(globtype, "LOG_MAX");
break;
case TAG_GLOB_PHYS_MIN:
strcpy(globtype, "PHYS_MIN");
break;
case TAG_GLOB_PHYS_MAX:
strcpy(globtype, "PHYS_MAX");
break;
case TAG_GLOB_UNIT_EXP:
strcpy(globtype, "EXP");
break;
case TAG_GLOB_UNIT:
strcpy(globtype, "UNIT");
break;
case TAG_GLOB_REPORT_SZ:
strcpy(globtype, "REPORT_SZ");
break;
case TAG_GLOB_REPORT_ID:
strcpy(globtype, "REPORT_ID");
/* New report, restart numbering */
inputnum = 0;
break;
case TAG_GLOB_REPORT_CNT:
strcpy(globtype, "REPORT_CNT");
break;
case TAG_GLOB_PUSH:
strcpy(globtype, "PUSH");
break;
case TAG_GLOB_POP:
strcpy(globtype, "POP");
break;
}
/* Check to make sure we have a good tag number
so we don't overflow array */
if (tag < TAG_GLOB_MAX) {
switch (size) {
case 1:
dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n",
indentstr, globtype, tag, size, data);
globalval[tag] = data;
break;
case 2:
dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n",
indentstr, globtype, tag, size, data16);
globalval[tag] = data16;
break;
case 4:
dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n",
indentstr, globtype, tag, size, data32);
globalval[tag] = data32;
break;
}
} else {
dev_dbg(ddev, "%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d\n",
indentstr, tag, size);
}
break;
case TYPE_LOCAL:
switch (tag) {
case TAG_GLOB_USAGE:
strcpy(globtype, "USAGE");
/* Always 1 byte */
usage = data;
break;
case TAG_GLOB_LOG_MIN:
strcpy(globtype, "MIN");
break;
case TAG_GLOB_LOG_MAX:
strcpy(globtype, "MAX");
break;
default:
strcpy(globtype, "UNKNOWN");
break;
}
switch (size) {
case 1:
dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n",
indentstr, tag, globtype, size, data);
break;
case 2:
dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n",
indentstr, tag, globtype, size, data16);
break;
case 4:
dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n",
indentstr, tag, globtype, size, data32);
break;
}
break;
}
}
}
int ieee80211_radiotap_iterator_init(
struct ieee80211_radiotap_iterator *iterator,
struct ieee80211_radiotap_header *radiotap_header,
int max_length, const struct ieee80211_radiotap_vendor_namespaces *vns)
{
if (max_length < (int)sizeof(struct ieee80211_radiotap_header))
return -EINVAL;
/* Linux only supports version 0 radiotap format */
if (radiotap_header->it_version)
return -EINVAL;
/* sanity check for allowed length and radiotap length field */
if (max_length < get_unaligned_le16(&radiotap_header->it_len))
return -EINVAL;
iterator->_rtheader = radiotap_header;
iterator->_max_length = get_unaligned_le16(&radiotap_header->it_len);
iterator->_arg_index = 0;
iterator->_bitmap_shifter = get_unaligned_le32(&radiotap_header->it_present);
iterator->_arg = (guint8 *)radiotap_header + sizeof(*radiotap_header);
iterator->_reset_on_ext = 0;
iterator->_next_bitmap = &radiotap_header->it_present;
iterator->_next_bitmap++;
iterator->_vns = vns;
iterator->current_namespace = &radiotap_ns;
iterator->is_radiotap_ns = 1;
#ifdef RADIOTAP_SUPPORT_OVERRIDES
iterator->n_overrides = 0;
iterator->overrides = NULL;
#endif
/* find payload start allowing for extended bitmap(s) */
if (iterator->_bitmap_shifter & (1<<IEEE80211_RADIOTAP_EXT)) {
if (!ITERATOR_VALID(iterator, sizeof(guint32)))
return -EINVAL;
while (get_unaligned_le32(iterator->_arg) &
(1 << IEEE80211_RADIOTAP_EXT)) {
iterator->_arg += sizeof(guint32);
/*
* check for insanity where the present bitmaps
* keep claiming to extend up to or even beyond the
* stated radiotap header length
*/
if (!ITERATOR_VALID(iterator, sizeof(guint32)))
return -EINVAL;
}
iterator->_arg += sizeof(guint32);
/*
* no need to check again for blowing past stated radiotap
* header length, because ieee80211_radiotap_iterator_next
* checks it before it is dereferenced
*/
}
iterator->this_arg = iterator->_arg;
/* we are all initialized happily */
return 0;
}
static void notification_available_cb(struct urb *urb)
{
int status;
struct usb_cdc_notification *ctrl;
struct ctrl_bridge *dev = urb->context;
struct bridge *brdg = dev->brdg;
unsigned int ctrl_bits;
unsigned char *data;
unsigned long flags;
/*usb device disconnect*/
if (urb->dev->state == USB_STATE_NOTATTACHED)
return;
spin_lock_irqsave(&dev->lock, flags);
dev->rx_state = RX_IDLE;
spin_unlock_irqrestore(&dev->lock, flags);
switch (urb->status) {
case 0:
/*success*/
break;
case -ESHUTDOWN:
case -ENOENT:
case -ECONNRESET:
case -EPROTO:
/* unplug */
return;
case -EPIPE:
dev_err(&dev->intf->dev,
"%s: stall on int endpoint\n", __func__);
/* TBD : halt to be cleared in work */
case -EOVERFLOW:
default:
pr_debug_ratelimited("%s: non zero urb status = %d\n",
__func__, urb->status);
goto resubmit_int_urb;
}
ctrl = (struct usb_cdc_notification *)urb->transfer_buffer;
data = (unsigned char *)(ctrl + 1);
switch (ctrl->bNotificationType) {
case USB_CDC_NOTIFY_RESPONSE_AVAILABLE:
spin_lock_irqsave(&dev->lock, flags);
dev->rx_state = RX_BUSY;
spin_unlock_irqrestore(&dev->lock, flags);
dev->resp_avail++;
usb_autopm_get_interface_no_resume(dev->intf);
usb_fill_control_urb(dev->readurb, dev->udev,
usb_rcvctrlpipe(dev->udev, 0),
(unsigned char *)dev->in_ctlreq,
dev->readbuf,
DEFAULT_READ_URB_LENGTH,
resp_avail_cb, dev);
status = usb_submit_urb(dev->readurb, GFP_ATOMIC);
if (status) {
dev_err(&dev->intf->dev,
"%s: Error submitting Read URB %d\n",
__func__, status);
usb_autopm_put_interface_async(dev->intf);
goto resubmit_int_urb;
}
return;
case USB_CDC_NOTIFY_NETWORK_CONNECTION:
dev_dbg(&dev->intf->dev, "%s network\n", ctrl->wValue ?
"connected to" : "disconnected from");
break;
case USB_CDC_NOTIFY_SERIAL_STATE:
dev->notify_ser_state++;
ctrl_bits = get_unaligned_le16(data);
dev_dbg(&dev->intf->dev, "serial state: %d\n", ctrl_bits);
dev->cbits_tohost = ctrl_bits;
if (brdg && brdg->ops.send_cbits)
brdg->ops.send_cbits(brdg->ctx, ctrl_bits);
break;
default:
dev_err(&dev->intf->dev, "%s: unknown notification %d received:"
"index %d len %d data0 %d data1 %d",
__func__, ctrl->bNotificationType, ctrl->wIndex,
ctrl->wLength, data[0], data[1]);
}
resubmit_int_urb:
ctrl_bridge_start_read(dev, GFP_ATOMIC);
}
static void notification_available_cb(struct urb *urb)
{
int status;
struct usb_cdc_notification *ctrl;
struct usb_device *udev;
struct ctrl_bridge *dev = urb->context;
struct bridge *brdg = dev->brdg;
unsigned int ctrl_bits;
unsigned char *data;
unsigned int iface_num;
/* if this intf is already disconnected, this urb free-ed before
* calling from qh_completions. just return and do nothing */
if (!dev->intf)
return;
udev = interface_to_usbdev(dev->intf);
iface_num = dev->intf->cur_altsetting->desc.bInterfaceNumber;
switch (urb->status) {
case 0:
pr_info("[NACB:%d]<\n", iface_num);
/*success*/
break;
case -ESHUTDOWN:
case -ENOENT:
case -ECONNRESET:
case -EPROTO:
/* unplug */
return;
case -EPIPE:
dev_err(&udev->dev, "%s: stall on int endpoint\n", __func__);
/* TBD : halt to be cleared in work */
case -EOVERFLOW:
default:
pr_debug_ratelimited("%s: non zero urb status = %d\n",
__func__, urb->status);
goto resubmit_int_urb;
}
ctrl = (struct usb_cdc_notification *)urb->transfer_buffer;
data = (unsigned char *)(ctrl + 1);
switch (ctrl->bNotificationType) {
case USB_CDC_NOTIFY_RESPONSE_AVAILABLE:
dev->resp_avail++;
usb_fill_control_urb(dev->readurb, udev,
usb_rcvctrlpipe(udev, 0),
(unsigned char *)dev->in_ctlreq,
dev->readbuf,
DEFAULT_READ_URB_LENGTH,
resp_avail_cb, dev);
status = usb_submit_urb(dev->readurb, GFP_ATOMIC);
if (status) {
dev_err(&udev->dev,
"%s: Error submitting Read URB %d\n",
__func__, status);
goto resubmit_int_urb;
} else
pr_info("[NRA:%d]>\n", iface_num);
return;
case USB_CDC_NOTIFY_NETWORK_CONNECTION:
dev_dbg(&udev->dev, "%s network\n", ctrl->wValue ?
"connected to" : "disconnected from");
break;
case USB_CDC_NOTIFY_SERIAL_STATE:
dev->notify_ser_state++;
ctrl_bits = get_unaligned_le16(data);
dev_dbg(&udev->dev, "serial state: %d\n", ctrl_bits);
dev->cbits_tohost = ctrl_bits;
if (brdg && brdg->ops.send_cbits)
brdg->ops.send_cbits(brdg->ctx, ctrl_bits);
#ifdef CONFIG_MDM_HSIC_PM
pr_info("%s: set lpa handling to false\n", __func__);
lpa_handling = false;
#endif
break;
default:
dev_err(&udev->dev, "%s: unknown notification %d received:"
"index %d len %d data0 %d data1 %d",
__func__, ctrl->bNotificationType, ctrl->wIndex,
ctrl->wLength, data[0], data[1]);
}
resubmit_int_urb:
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
dev_err(&udev->dev, "%s: Error re-submitting Int URB %d\n",
__func__, status);
} else
pr_info("[CHKRA:%d]>\n", iface_num);
}
