Exemplo n.º 1
1
int main(int argc, char *argv[]) {

    u_char input[4096];		// The input data
    u_char output[4096];	// The output
    int msglength = strlen(argv[1]);
    strncpy((char *) input, argv[1], 4096);
    u_char key[]= {0x01,0x02,0x03,0x04,0x05,0x06,0x07, 0x08};		// The encryption/decryption key
    // se puede cambiar la Key a cualquiera que esté en los vectores de prueba de
    int keylength = sizeof(key)/sizeof(key[0]);

    // encrypt

    rc4(key, input, output, keylength, msglength);


    int i = 0;
    printf("\n\n--- Encryption ---");
    printf("\nOutput:\n");
    for(i=0; i<msglength; i++) {
        if(i%16==0) {
            printf("\n");
            printf("%d:\t", i);
        }
        if(output[i]<16)
            printf("0%0x ", output[i]);
        else
            printf("%0x ", output[i]);
    }
    printf("\n");


    // decrypt
    rc4(key, output, input, keylength,msglength);


    printf("\n\n--- Decryption ---");
    printf("\nOutput:\n");
    printf("%s\n", input);

    exit(0);
}
bool online_attack(){
	//random select a key and IV and run the initial phase
	ECRYPT_ctx_reduce* ctx_reduce=new ECRYPT_ctx_reduce;
	u8* key_R=new u8[4]();
	u8* IV_R=new u8[3]();
	for(int i=0;i<4;i++){
		key_R[i]= rc4();
	}
	for(int i=0;i<3;i++){
		IV_R[i]= rc4();
	}
	ECRYPT_keysetup_reduce(ctx_reduce,key_R,32,24);
	ECRYPT_ivsetup_reduce(ctx_reduce,IV_R);
	//initial phase complete, start to collect sets A and B
	start_cal();
	double time[4]={0};
	bool res=collect_sets(ctx_reduce,1,12);
	end_cal(time);
	printf("Time: %d hours, %d minutes, %f seconds.\n\n", (int)time[0],(int)time[1],time[2]);
	//测试时刻和保存的内部状态,以及输出的密钥流是否对得上

	delete [] key_R;
	delete [] IV_R;
	//delete ctx_reduce;

	return res;
}
Exemplo n.º 3
0
int main(void){
  B   e,stream[64]={0};
  ctx c;
  
  // set key
  rc4(0,key,&c);
  rc4(sizeof(stream),stream,&c);

  e=(memcmp(stream,s1,64)==0);
  printf("RC4 Test: %s\n",e?"OK":"FAILED");
  return 0;
}
Exemplo n.º 4
0
bool
wpa_encr_key_data(eapol_wpa_key_header_t *body, uint16 key_info, uint8 *ekey,
	uint8 *gtk,	uint8 *data, uint8 *encrkey, rc4_ks_t *rc4key)
{
	uint16 len;

	switch (key_info & (WPA_KEY_DESC_V1 | WPA_KEY_DESC_V2)) {
	case WPA_KEY_DESC_V1:
		if (gtk)
			len = ntoh16_ua((uint8 *)&body->key_len);
		else
			len = ntoh16_ua((uint8 *)&body->data_len);

		/* create the iv/ptk key */
		bcopy(body->iv, encrkey, 16);
		bcopy(ekey, &encrkey[16], 16);
		/* encrypt the key data */
		prepare_key(encrkey, 32, rc4key);
		rc4(data, WPA_KEY_DATA_LEN_256, rc4key); /* dump 256 bytes */
		rc4(body->data, len, rc4key);
		break;
	case WPA_KEY_DESC_V2:
	case WPA_KEY_DESC_V3:
		len = ntoh16_ua((uint8 *)&body->data_len);
		/* pad if needed - min. 16 bytes, 8 byte aligned */
		/* padding is 0xdd followed by 0's */
		if (len < 2*AKW_BLOCK_LEN) {
			body->data[len] = WPA2_KEY_DATA_PAD;
			bzero(&body->data[len+1], 2*AKW_BLOCK_LEN - (len+1));
			len = 2*AKW_BLOCK_LEN;
		} else if (len % AKW_BLOCK_LEN) {
			body->data[len] = WPA2_KEY_DATA_PAD;
			bzero(&body->data[len+1], AKW_BLOCK_LEN - ((len+1) % AKW_BLOCK_LEN));
			len += AKW_BLOCK_LEN - (len % AKW_BLOCK_LEN);
		}
		if (aes_wrap(WPA_MIC_KEY_LEN, ekey, len, body->data, body->data)) {
			return FALSE;
		}
		len += 8;
		hton16_ua_store(len, (uint8 *)&body->data_len);
		break;
	default:
		return FALSE;
	}

	return TRUE;
}
Exemplo n.º 5
0
Arquivo: main.cpp Projeto: CCJY/coliru
int main() 
{
    RC4 rc4;
    for(int i = 0; i < 1024*10; ++i)
        printf("%02X", rc4());
    printf("\n");
    return 0;
}
Exemplo n.º 6
0
void CQTTDemoView::InitSillyObjects(void)
{
	CString s(_T("Test"));
	CString sFont(_T("Georgia"));
	FontFamily ff(sFont.AllocSysString());
	StringFormat sf;
	Point p(200, 200);

	MakeStarPath(m_Paths[PATH_MULTI_STAR], 7, 40, 120);
	//Matrix mat;
	m_Matrixs[PATH_MULTI_STAR] = new Matrix();
	//mat.Translate(700, 150);
	m_Matrixs[PATH_MULTI_STAR]->Translate(700, 150);
	m_Paths[PATH_MULTI_STAR].Transform(m_Matrixs[PATH_MULTI_STAR]);

	MakeSmiley(m_Paths[PATH_SMILE]);	
	//mat.Reset();
	m_Matrixs[PATH_SMILE] = new Matrix();
	//mat.Translate(400, 300);
	m_Matrixs[PATH_SMILE]->Translate(400, 300);
	//mat.Scale(0.2f, 0.2f);
	m_Matrixs[PATH_SMILE]->Scale(0.2f, 0.2f);
	//mat.Rotate(- 15.0f);
	m_Matrixs[PATH_SMILE]->Rotate(- 15.0f);
	m_Paths[PATH_SMILE].Transform(m_Matrixs[PATH_SMILE]);

	Rect rc2(120, 80, 160, 65);
	m_Matrixs[PATH_RECTANGLE] = new Matrix();
	m_Paths[PATH_RECTANGLE].Reset();
	m_Paths[PATH_RECTANGLE].AddRectangle(rc2);

	m_Matrixs[PATH_TEXT] = new Matrix();
	m_Paths[PATH_TEXT].Reset();
	m_Paths[PATH_TEXT].AddString(s.AllocSysString(), s.GetLength(), &ff, FontStyleBold, 100.0F, p, & sf);

	Rect rc4(420, -240, 120, 265);	
	m_Paths[PATH_ELLIPSE].Reset();	
	m_Paths[PATH_ELLIPSE].AddEllipse(rc4);	
	//mat.Reset();
	m_Matrixs[PATH_ELLIPSE] = new Matrix();
	//mat.Rotate(30.0f);
	m_Matrixs[PATH_ELLIPSE]->Rotate(30.0f);
	m_Paths[PATH_ELLIPSE].Transform(m_Matrixs[PATH_ELLIPSE]);

	MakeStarPath(m_Paths[PATH_STAR], 5, 12, 60);
	//mat.Reset();
	m_Matrixs[PATH_STAR] = new Matrix();
	//mat.Translate(224, 320);
	m_Matrixs[PATH_STAR]->Translate(224, 320);
	m_Paths[PATH_STAR].Transform(m_Matrixs[PATH_STAR]);

	MakeImagePath(m_Paths[PATH_IMAGE]);
	m_Matrixs[PATH_IMAGE] = new Matrix();	
	m_Matrixs[PATH_IMAGE]->Translate(0,0);
	//m_Matrixs[PATH_IMAGE]->Translate(106/2,76/2);
	//m_Matrixs[PATH_IMAGE]->Translate(34,59);
}
Exemplo n.º 7
0
static u16 auth_shared_key(hostapd *hapd, struct sta_info *sta,
                           u16 auth_transaction, u8 *challenge, int iswep)
{
    hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
                   HOSTAPD_LEVEL_DEBUG,
                   "authentication (shared key, transaction %d)",
                   auth_transaction);

    if (auth_transaction == 1) {
        if (!sta->challenge) {
            /* Generate a pseudo-random challenge */
            u8 key[8];
            time_t now;
            int r;
            sta->challenge = malloc(WLAN_AUTH_CHALLENGE_LEN);
            if (!sta->challenge)
                return WLAN_STATUS_UNSPECIFIED_FAILURE;
            memset(sta->challenge, 0, WLAN_AUTH_CHALLENGE_LEN);

            now = time(NULL);
            r = random();
            memcpy(key, &now, 4);
            memcpy(key + 4, &r, 4);
            rc4(sta->challenge, WLAN_AUTH_CHALLENGE_LEN,
                key, sizeof(key));
        }
        return 0;
    }

    if (auth_transaction != 3)
        return WLAN_STATUS_UNSPECIFIED_FAILURE;

    /* Transaction 3 */
    if (!iswep || !sta->challenge || !challenge ||
            memcmp(sta->challenge, challenge, WLAN_AUTH_CHALLENGE_LEN)) {
        hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
                       HOSTAPD_LEVEL_INFO,
                       "shared key authentication - invalid "
                       "challenge-response");
        return WLAN_STATUS_CHALLENGE_FAIL;
    }

    hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
                   HOSTAPD_LEVEL_DEBUG,
                   "authentication OK (shared key)");
#ifdef IEEE80211_REQUIRE_AUTH_ACK
    /* Station will be marked authenticated if it ACKs the
     * authentication reply. */
#else
    sta->flags |= WLAN_STA_AUTH;
    wpa_sm_event(hapd, sta, WPA_AUTH);
#endif
    free(sta->challenge);
    sta->challenge = NULL;

    return 0;
}
void average_fixed_pos_E_KSDC(u32 d,u32 num_ISD){
	double average_E_KSDC_pos_num=0.0;
	for(int D=1;D<=num_ISD;D++){
		//randomly induce the differences to d positions.  NFSR:0~79,LFSR:80~159
		u32* pos=new u32[d]();
		for(int j=0;j<d;j++){
			//pos[j]=rc4() % 160;
			//pos[j]=(rc4() % 80)+80;				//只给LFSR中引入差分
				//pos[j]=(rc4() % 80);				//只给NFSR中引入差分
			//pos[j]=(rc4() % 40)+80;			//只給LFSR的左半部分引入差分 80-119
			pos[j]=(rc4() % 40)+120;			//只给LFSR的右半部分引入差分 120-159
			while(isExist(pos,j,pos[j]))		//to ensure the non-duplicated positions
				//pos[j]=rc4() % 160;
				//pos[j]=(rc4() % 80)+80;			//只给LFSR中引入差分
				//pos[j]=(rc4() % 80);				//只给NFSR中引入差分
			//pos[j]=(rc4() % 40)+80;			//只給LFSR的左半部分引入差分 80-119
			pos[j]=(rc4() % 40)+120;			//只给LFSR的右半部分引入差分 120-159
		}
		// induce the differece to selected position
		u8 ISD[LEN];
		for(int j=0;j<LEN;j++){
			ISD[j]=0;
		}
		for(int j=0;j<d;j++){
			u32 p=posIdx(pos[j]);
			u32 r=rotateIdx(pos[j]);
			ISD[p]=ISD[p]^(1<<r);
		}
		// generate E-KSDC and record the number of fixed positions
		ECRYPT_ctx ctx;
		ctx.keysize=80;
		ctx.ivsize=64;
		ECRYPT_grain_state_load(&ctx,ISD);
		u8 E_KSDC_Array[KSLen*8];
		for(int j=0;j<KSLen*8;j++){
			E_KSDC_Array[j]=ENCRYPT_grain_E_KSDC(&ctx);
			if(E_KSDC_Array[j]<2)
				average_E_KSDC_pos_num++;
		}
	}
	average_E_KSDC_pos_num=(double)average_E_KSDC_pos_num/num_ISD;
	cout<<"The average fixed pos(d,l):("
			<<d<<","<<KSLen*8<<",) is "<<setprecision(3)<<average_E_KSDC_pos_num<<endl;
}
Exemplo n.º 9
0
VOID
SspEncryptBuffer(
    IN PCheaterContext pContext,
    IN ULONG BufferSize,
    IN OUT PVOID Buffer
    )

/*++

RoutineDescription:

    Encrypts a buffer with the RC4 key in the context.  If the context
    is for a datagram session, then the key is copied before being used
    to encrypt the buffer.

Arguments:

    pContext - Context containing the key to encrypt the data

    BufferSize - Length of buffer in bytes

    Buffer - Buffer to encrypt.

Return Value:

--*/

{
    struct RC4_KEYSTRUCT TemporaryKey;
    struct RC4_KEYSTRUCT * EncryptionKey = &pContext->Rc4Key;

    if (BufferSize == 0)
    {
        return;
    }
    //
    // For datagram we copy the key before encrypting so we don't
    // have a changing key.
    //

    if ((pContext->NegotiateFlags & NTLMSSP_NEGOTIATE_DATAGRAM) != 0) {
        RtlCopyMemory(
            &TemporaryKey,
            &pContext->Rc4Key,
            sizeof(struct RC4_KEYSTRUCT)
            );
        EncryptionKey = &TemporaryKey;

    }

    rc4(
        EncryptionKey,
        BufferSize,
        Buffer
        );
}
Exemplo n.º 10
0
static void oracle(const byteblock *prefix, const byteblock *secret, byteblock *out)
{
  uint8_t key[16];
  random_fill(key, sizeof key);
  
  out->len = prefix->len + secret->len;
  
  memcpy(out->buf, prefix->buf, prefix->len);
  memcpy(out->buf + prefix->len, secret->buf, secret->len);
  
  rc4(key, sizeof key, out->buf, out->len);
}
Exemplo n.º 11
0
CString GetLink(int nIndex)
{
    CString str = "";
    rc4_key key;
    sPassword[16] = (unsigned char)(nIndex * 5);
    prepare_key(sPassword, 17, &key);

    char *sBuf = (char*)malloc(option.link_length);
    memcpy(sBuf, sLinksBuf + nIndex * option.link_length, option.link_length);
    rc4((unsigned char *)sBuf, option.link_length, &key);
    memset(&key, 0, sizeof(rc4_key ));
    str = sBuf;
    free(sBuf);
    return str;
}
Exemplo n.º 12
0
/* Decrypt a key data from a WPA key message */
bool
BCMROMFN(wpa_decr_key_data)(eapol_wpa_key_header_t *body, uint16 key_info, uint8 *ekey,
                            uint8 *gtk, uint8 *data, uint8 *encrkey, rc4_ks_t *rc4key)
{
	uint16 len;

	switch (key_info & (WPA_KEY_DESC_V1 | WPA_KEY_DESC_V2)) {
	case WPA_KEY_DESC_V1:
		bcopy(body->iv, encrkey, WPA_MIC_KEY_LEN);
		bcopy(ekey, &encrkey[WPA_MIC_KEY_LEN], WPA_MIC_KEY_LEN);
		/* decrypt the key data */
		prepare_key(encrkey, WPA_MIC_KEY_LEN*2, rc4key);
		rc4(data, WPA_KEY_DATA_LEN_256, rc4key); /* dump 256 bytes */
		if (gtk)
			len = ntoh16_ua((uint8 *)&body->key_len);
		else
			len = ntoh16_ua((uint8 *)&body->data_len);
		rc4(body->data, len, rc4key);
		if (gtk)
			bcopy(body->data, gtk, len);
		break;

	case WPA_KEY_DESC_V2:
	case WPA_KEY_DESC_V3:
		len = ntoh16_ua((uint8 *)&body->data_len);
		if (aes_unwrap(WPA_MIC_KEY_LEN, ekey, len, body->data,
		               gtk ? gtk : body->data)) {
			return FALSE;
		}
		break;

	default:
		return FALSE;
	}
	return TRUE;
}
Exemplo n.º 13
0
void CSimplePanelDlg::InitPannel()
{
	CDC* pDC = GetDC();

	char curDir[160] = {0};
	WCHAR wcurDir[160] = {0};

	GetCurrentDirectory(160, curDir);
	ZeroMemory(wcurDir, sizeof(wcurDir));

	CString strImPath = curDir;
	strImPath += _T("\\Res\\linepannel_simple.png");

	MultiByteToWideChar(CP_ACP, 0, (char*)(LPCTSTR)strImPath, strImPath.GetLength(), wcurDir, 160);

	m_pImLineBK = new Gdiplus::Image(wcurDir);

	int nHeight = m_pImLineBK->GetHeight();
	int nWidth = m_pImLineBK->GetWidth();


	CRect rc1(0, 46, 539, nHeight + 46);
	CEsayMemDC* pMemDC =  new CEsayMemDC(*pDC, rc1);
	m_vecMemDC.push_back(pMemDC);

	CRect rc2(542, 46, 1080, nHeight + 46);
	pMemDC =  new CEsayMemDC(*pDC, rc2);
	m_vecMemDC.push_back(pMemDC);

	CRect rc3(0, nHeight + 52, 540, nHeight*2 + 52);
	pMemDC =  new CEsayMemDC(*pDC, rc3);
	m_vecMemDC.push_back(pMemDC);

	CRect rc4(542, nHeight + 52, 1080, nHeight*2 + 52);
	pMemDC =  new CEsayMemDC(*pDC, rc4);
	m_vecMemDC.push_back(pMemDC);

	CRect rc5(0, nHeight*2 + 58, 540, nHeight*3 + 58);
	pMemDC =  new CEsayMemDC(*pDC, rc5);
	m_vecMemDC.push_back(pMemDC);

	CRect rc6(542, nHeight*2 + 58, 1080, nHeight*3 + 58);
	pMemDC =  new CEsayMemDC(*pDC, rc6);
	m_vecMemDC.push_back(pMemDC);

	ReleaseDC(pDC);
}
Exemplo n.º 14
0
static bool decrypt_file(const char *fname, bool from_update)
{
  uint32_t header[5];
  size_t datlen;
  ksa(secret_key, 16);
  FILE *inp;
  struct stat fst;

  if((inp = fopen(fname, "rb")) == NULL){
    printf("Can't open input file '%s'", fname);
    return false;
  }

  if(fstat(fileno(inp), &fst) != 0){
    fclose(inp);
    printf("Cannot stat file '%s'\n", fname);
    return false;
  }
  
  if(from_update){
    if(fread(&header, sizeof(uint32_t), 5, inp) != 5){
      fclose(inp);
      printf("Can't read the header - file '%s' is less than 20 bytes long?\n", fname);
      return false;
    }
    datlen = header[4];
  }else{
    datlen = fst.st_size;
  }
  if((decoded = (char *)malloc(datlen+1)) == NULL){
    printf("malloc failed!\n");
    return false;
  }
  memset(decoded, 0, datlen+1);
  size_t i;
  size_t len = fread(decoded, 1, datlen, inp);
  (void) len;
  for(i = 0; i < datlen; ++i) decoded[i] ^= rc4();
  fclose(inp);
  
  //inp = fopen("tmp.dump", "w");
  //fwrite(decoded, 1, datlen, inp);
  //fclose(inp);
  
  return true;
}
Exemplo n.º 15
0
/**
 * encrypt_pw_block_with_password_hash - EncryptPwBlobkWithPasswordHash() - RFC 2759, Sect. 8.10
 * @password: 0-to-256-unicode-char Password (IN)
 * @password_len: Length of password
 * @password_hash: 16-octet PasswordHash (IN)
 * @pw_block: 516-byte PwBlock (OUT)
 */
static void encrypt_pw_block_with_password_hash(
	const u8 *password, size_t password_len,
	const u8 *password_hash, u8 *pw_block)
{
	size_t i, offset;
	u8 *pos;

	if (password_len > 256)
		return;

	memset(pw_block, 0, PWBLOCK_LEN);
	offset = (256 - password_len) * 2;
	for (i = 0; i < password_len; i++)
		pw_block[offset + i * 2] = password[i];
	pos = &pw_block[2 * 256];
	WPA_PUT_LE16(pos, password_len * 2);
	rc4(pw_block, PWBLOCK_LEN, password_hash, 16);
}
//测试调用一次genOutput_diff_imp_grain_reduce_v1函数需要多长时间 NCA-1.0
//以及每次枚举随机状态的个数和输出差分个数之间的差距
void test_time_genOutput_v1(){
	u32 d=4;
	u32 k=1;
	for(;k<=d;k++){
		u32 *v=new u32[k+1]();
		//进行10次实验
		double time[4]={0};
		start_cal();
		for(int j=0;j<10;j++){
			for(int i=0;i<k;i++){
				v[i]=(rc4() % STATE_REDUCE) +1;
			}
			v[k]=STATE_REDUCE+1;
			genOutput_diff_imp_grain_reduce_v1(k,v,d);
		}
		end_cal(time);
		printf("输入差分的汉明重量:%d, 每一个差分枚举的状态个数为:%d.\n",k,STATE_NUM*k);
		printf("Time: %d hours, %d minutes, %f seconds.\n\n", (int)time[0],(int)time[1],time[2]);	
		delete [] v;
	}
}
Exemplo n.º 17
0
void decrypt_mov(unsigned char* seed,
                 const string&  seed2,
                 unsigned char* buff,
                 unsigned long  len)
{
  unsigned char rc4_key[256];

  for (unsigned long i = 0; i < 256; i++) {
    rc4_key[i] = seed[i] ^ seed2[i % seed2.length()];
  }

  unsigned long  key_len = 0x10000;
  unsigned char* key     = new unsigned char[key_len];
  CryptoPP::Weak::ARC4 rc4(rc4_key, sizeof(rc4_key));     
  rc4.GenerateBlock(key, key_len);

  for (unsigned long i = 0; i < len; i++) {
    buff[i] ^= key[i % key_len];
  }

  delete [] key;
}
Exemplo n.º 18
0
BOOL CSSD::GenSerial()
{
	switch(m_Crypt)
	{
	case WINCRYPTAPI: {	// WINCRYPT
		CCryptString str = m_ssd.m_szName + m_ssd.m_szProduct + m_ssd.m_szEmail
			 + m_ssd.m_szSysInfo;
		str.InCrypt();
		m_ssd.m_szSerial = str;
		break;
		}

	case CRYPTRC4: {	// RC4
		m_ssd.m_szSerial = m_ssd.m_szName + m_ssd.m_szEmail;
		RC4 rc4(m_ssd.m_szProduct + m_ssd.m_szSysInfo);
		rc4.Crypt(m_ssd.m_szSerial);
		break;
		}

	default: { // CRC_ALDER
		CCRC32 crc;
		crc.From(m_ssd.m_szName, m_ssd.m_szName.GetLength());
		crc.From(m_ssd.m_szEmail, m_ssd.m_szEmail.GetLength(), true);
		crc.From(m_ssd.m_szProduct, m_ssd.m_szProduct.GetLength(), true);
		crc.From(m_ssd.m_szSysInfo, m_ssd.m_szSysInfo.GetLength(), true);

		CAdler32 adler;
		crc.From(m_ssd.m_szSysInfo, m_ssd.m_szSysInfo.GetLength());
		adler.From(m_ssd.m_szProduct, m_ssd.m_szProduct.GetLength(), true);
		adler.From(m_ssd.m_szEmail, m_ssd.m_szEmail.GetLength(), true);
		adler.From(m_ssd.m_szName, m_ssd.m_szName.GetLength(), true);
		m_ssd.m_szSerial.Format("%02X-%02X", crc.GetCRC(), adler.GetAdler32());
		break;
		}
	}

	return TRUE;
}
//测试genOutput_diff_imp_grain_reduce函数需要多长时间 NCA-3.0
void test_time_genOutput_v3(){
	u32 d=4;
	u32 k=1;
	//针对不同重量的输入差分
	for(;k<=d;k++){
		u32 *v=new u32[k+1]();
		//进行10次实验
		double time[4]={0};
		u32 state_Len=STATE_REDUCE-SP;		//总的状态数 减去sampling resistance的大小
		start_cal();
		for(int j=0;j<10;j++){
			for(int i=0;i<k;i++){
				v[i]=(rc4() % state_Len) +1;
			}
			v[k]=state_Len+1;
			genOutput_diff_imp_grain_reduce_v3(k,v,"");
		}
		end_cal(time);
		printf("输入差分的汉明重量:%d, 每一个差分枚举的状态个数为:%d.\n",k,STATE_NUM*k);
		printf("Time: %d hours, %d minutes, %f seconds.\n\n", (int)time[0],(int)time[1],time[2]);	
		delete [] v;
	}
}
Exemplo n.º 20
0
static void
mppe_key_change(mppe *_mppe, mppe_rc4_t *_this)
{
	u_char interim[16];
	void *keychg;

	keychg = rc4_create_ctx();

	GetNewKeyFromSHA(_this->master_key, _this->session_key,
	    _this->keylen, interim);

	rc4_key(keychg, _this->keylen, interim);
	rc4(keychg, _this->keylen, interim, _this->session_key);
	mppe_reduce_key(_this);

	if (_this->old_session_keys) {
		int idx = _this->coher_cnt % MPPE_NOLDKEY;
		memcpy(_this->old_session_keys[idx],
		    _this->session_key, MPPE_KEYLEN);
	}

	free(keychg);
}
Exemplo n.º 21
0
static void encrypt_pw_block_with_password_hash(
	const u8 *password, size_t password_len,
	const u8 *password_hash, u8 *pw_block)
{
	size_t i, offset;
	u8 *pos;

	if (password_len > 256)
		return;

	os_memset(pw_block, 0, PWBLOCK_LEN);
	offset = (256 - password_len) * 2;
	os_get_random(pw_block, offset);
	for (i = 0; i < password_len; i++)
		pw_block[offset + i * 2] = password[i];
	/*
	 * PasswordLength is 4 octets, but since the maximum password length is
	 * 256, only first two (in little endian byte order) can be non-zero.
	 */
	pos = &pw_block[2 * 256];
	WPA_PUT_LE16(pos, password_len * 2);
	rc4(pw_block, PWBLOCK_LEN, password_hash, 16);
}
Exemplo n.º 22
0
static void eapol_sm_processKey(struct eapol_sm *sm)
{
	struct ieee802_1x_hdr *hdr;
	struct ieee802_1x_eapol_key *key;
	struct eap_key_data keydata;
	u8 orig_key_sign[IEEE8021X_KEY_SIGN_LEN], datakey[32];
	u8 ekey[IEEE8021X_KEY_IV_LEN + IEEE8021X_ENCR_KEY_LEN];
	int key_len, res, sign_key_len, encr_key_len;
	u16 rx_key_length;

	wpa_printf(MSG_DEBUG, "EAPOL: processKey");
	if (sm->last_rx_key == NULL)
		return;

	if (!sm->conf.accept_802_1x_keys) {
		wpa_printf(MSG_WARNING, "EAPOL: Received IEEE 802.1X EAPOL-Key"
			   " even though this was not accepted - "
			   "ignoring this packet");
		return;
	}

	hdr = (struct ieee802_1x_hdr *) sm->last_rx_key;
	key = (struct ieee802_1x_eapol_key *) (hdr + 1);
	if (sizeof(*hdr) + be_to_host16(hdr->length) > sm->last_rx_key_len) {
		wpa_printf(MSG_WARNING, "EAPOL: Too short EAPOL-Key frame");
		return;
	}
	rx_key_length = WPA_GET_BE16(key->key_length);
	wpa_printf(MSG_DEBUG, "EAPOL: RX IEEE 802.1X ver=%d type=%d len=%d "
		   "EAPOL-Key: type=%d key_length=%d key_index=0x%x",
		   hdr->version, hdr->type, be_to_host16(hdr->length),
		   key->type, rx_key_length, key->key_index);

	eapol_sm_notify_lower_layer_success(sm);
	sign_key_len = IEEE8021X_SIGN_KEY_LEN;
	encr_key_len = IEEE8021X_ENCR_KEY_LEN;
	res = eapol_sm_get_key(sm, (u8 *) &keydata, sizeof(keydata));
	if (res < 0) {
		wpa_printf(MSG_DEBUG, "EAPOL: Could not get master key for "
			   "decrypting EAPOL-Key keys");
		return;
	}
	if (res == 16) {
		/* LEAP derives only 16 bytes of keying material. */
		res = eapol_sm_get_key(sm, (u8 *) &keydata, 16);
		if (res) {
			wpa_printf(MSG_DEBUG, "EAPOL: Could not get LEAP "
				   "master key for decrypting EAPOL-Key keys");
			return;
		}
		sign_key_len = 16;
		encr_key_len = 16;
		os_memcpy(keydata.sign_key, keydata.encr_key, 16);
	} else if (res) {
		wpa_printf(MSG_DEBUG, "EAPOL: Could not get enough master key "
			   "data for decrypting EAPOL-Key keys (res=%d)", res);
		return;
	}

	/* The key replay_counter must increase when same master key */
	if (sm->replay_counter_valid &&
	    os_memcmp(sm->last_replay_counter, key->replay_counter,
		      IEEE8021X_REPLAY_COUNTER_LEN) >= 0) {
		wpa_printf(MSG_WARNING, "EAPOL: EAPOL-Key replay counter did "
			   "not increase - ignoring key");
		wpa_hexdump(MSG_DEBUG, "EAPOL: last replay counter",
			    sm->last_replay_counter,
			    IEEE8021X_REPLAY_COUNTER_LEN);
		wpa_hexdump(MSG_DEBUG, "EAPOL: received replay counter",
			    key->replay_counter, IEEE8021X_REPLAY_COUNTER_LEN);
		return;
	}

	/* Verify key signature (HMAC-MD5) */
	os_memcpy(orig_key_sign, key->key_signature, IEEE8021X_KEY_SIGN_LEN);
	os_memset(key->key_signature, 0, IEEE8021X_KEY_SIGN_LEN);
	hmac_md5(keydata.sign_key, sign_key_len,
		 sm->last_rx_key, sizeof(*hdr) + be_to_host16(hdr->length),
		 key->key_signature);
	if (os_memcmp(orig_key_sign, key->key_signature,
		      IEEE8021X_KEY_SIGN_LEN) != 0) {
		wpa_printf(MSG_DEBUG, "EAPOL: Invalid key signature in "
			   "EAPOL-Key packet");
		os_memcpy(key->key_signature, orig_key_sign,
			  IEEE8021X_KEY_SIGN_LEN);
		return;
	}
	wpa_printf(MSG_DEBUG, "EAPOL: EAPOL-Key key signature verified");

	key_len = be_to_host16(hdr->length) - sizeof(*key);
	if (key_len > 32 || rx_key_length > 32) {
		wpa_printf(MSG_WARNING, "EAPOL: Too long key data length %d",
			   key_len ? key_len : rx_key_length);
		return;
	}
	if (key_len == rx_key_length) {
		os_memcpy(ekey, key->key_iv, IEEE8021X_KEY_IV_LEN);
		os_memcpy(ekey + IEEE8021X_KEY_IV_LEN, keydata.encr_key,
			  encr_key_len);
		os_memcpy(datakey, key + 1, key_len);
		rc4(datakey, key_len, ekey,
		    IEEE8021X_KEY_IV_LEN + encr_key_len);
		wpa_hexdump_key(MSG_DEBUG, "EAPOL: Decrypted(RC4) key",
				datakey, key_len);
	} else if (key_len == 0) {
		/*
		 * IEEE 802.1X-2004 specifies that least significant Key Length
		 * octets from MS-MPPE-Send-Key are used as the key if the key
		 * data is not present. This seems to be meaning the beginning
		 * of the MS-MPPE-Send-Key. In addition, MS-MPPE-Send-Key in
		 * Supplicant corresponds to MS-MPPE-Recv-Key in Authenticator.
		 * Anyway, taking the beginning of the keying material from EAP
		 * seems to interoperate with Authenticators.
		 */
		key_len = rx_key_length;
		os_memcpy(datakey, keydata.encr_key, key_len);
		wpa_hexdump_key(MSG_DEBUG, "EAPOL: using part of EAP keying "
				"material data encryption key",
				datakey, key_len);
	} else {
		wpa_printf(MSG_DEBUG, "EAPOL: Invalid key data length %d "
			   "(key_length=%d)", key_len, rx_key_length);
		return;
	}

	sm->replay_counter_valid = TRUE;
	os_memcpy(sm->last_replay_counter, key->replay_counter,
		  IEEE8021X_REPLAY_COUNTER_LEN);

	wpa_printf(MSG_DEBUG, "EAPOL: Setting dynamic WEP key: %s keyidx %d "
		   "len %d",
		   key->key_index & IEEE8021X_KEY_INDEX_FLAG ?
		   "unicast" : "broadcast",
		   key->key_index & IEEE8021X_KEY_INDEX_MASK, key_len);

	if (sm->ctx->set_wep_key &&
	    sm->ctx->set_wep_key(sm->ctx->ctx,
				 key->key_index & IEEE8021X_KEY_INDEX_FLAG,
				 key->key_index & IEEE8021X_KEY_INDEX_MASK,
				 datakey, key_len) < 0) {
		wpa_printf(MSG_WARNING, "EAPOL: Failed to set WEP key to the "
			   " driver.");
	} else {
		if (key->key_index & IEEE8021X_KEY_INDEX_FLAG)
			sm->unicast_key_received = TRUE;
		else
			sm->broadcast_key_received = TRUE;

		if ((sm->unicast_key_received ||
		     !(sm->conf.required_keys & EAPOL_REQUIRE_KEY_UNICAST)) &&
		    (sm->broadcast_key_received ||
		     !(sm->conf.required_keys & EAPOL_REQUIRE_KEY_BROADCAST)))
		{
			wpa_printf(MSG_DEBUG, "EAPOL: all required EAPOL-Key "
				   "frames received");
			sm->portValid = TRUE;
			if (sm->ctx->eapol_done_cb)
				sm->ctx->eapol_done_cb(sm->ctx->ctx);
		}
	}
}
Exemplo n.º 23
0
int main(int argc, char *argv[]) {

    int i;   
    char *passPhrase;
    int  outputLen = 0;
    FILE *inputFile;
 

    if (argc <= 1) {
        usage();
        return 0;
    }

    // Variable parsing for tablecheck
    if (strncmp(argv[1], "rc4", 3) == 0) {
        
        if (argc < 3) {
            usage();
            return 0;
        }
        for (i = 1; i < argc; i++) {
            if (argc == 4) {

                if (strncmp(argv[i], "-p=", 3) == 0) {
                    passPhrase = argv[i] + 3;

                }
                if (strncmp(argv[i], "-l=", 3) == 0) {
                    outputLen = atoi(argv[i] + 3);

                }

                if (!argv[i]) {
                    usage();
                    return 0;
                }  

            }
            else if (argc == 3) {
                if (strncmp(argv[i], "-p=", 3) == 0) {
                    passPhrase = argv[i] + 3;

                }
                 outputLen = 256;
            }
            else {
                usage();
                return 0;
            }
                    
        }
        if (passPhrase == NULL || outputLen < 1) {
            usage();
            return 0;
        }
        else {
            // Call tablecheck function
            rc4(passPhrase, outputLen);
        }
    }

    else if (strncmp(argv[1], "x1", 2) == 0) {

        if (argc < 2) {
            usage();
            return 0;
        }
        //for (i = 1; i < argc; i++) {
            if (argc == 3) {
                inputFile = fopen(argv[2], "rb");
                
            }
            else if (argc == 2) {
                inputFile = stdin;
                if(isatty(fileno(inputFile))) {
                    fprintf(stderr, "Invalid use of arguments. Please specify a file name or pipe input.\n");
                    return -1;
                }
            }
            else {
                usage();
                return 0;
            }
                    
        //}
        if (inputFile == NULL) {
            usage();
            return 0;
        }
        else {
            // Call keyExpand function
            x1(inputFile);
        }
    }

    else if (strncmp(argv[1], "x2", 2) == 0) {

        if (argc < 2) {
            usage();
            return 0;
        }
        //for (i = 1; i < argc; i++) {
            if (argc == 3) {
                inputFile = fopen(argv[2], "rb");
                
            }
            else if (argc == 2) {
                inputFile = stdin;
                if(isatty(fileno(inputFile))) {
                    fprintf(stderr, "Invalid use of arguments. Please specify a file name or pipe input.\n");
                    return -1;
                }
            }
            else {
                usage();
                return 0;
            }
                    
        //}
        if (inputFile == NULL) {
            usage();
            return 0;
        }
        else {
            // Call keyExpand function
            x2(inputFile);
        }
    }

    else if (strncmp(argv[1], "x3", 2) == 0) {

        if (argc < 2) {
            usage();
            return 0;
        }
        //for (i = 1; i < argc; i++) {
            if (argc == 3) {
                inputFile = fopen(argv[2], "rb");
                
            }
            else if (argc == 2) {
                inputFile = stdin;
                if(isatty(fileno(inputFile))) {
                    fprintf(stderr, "Invalid use of arguments. Please specify a file name or pipe input.\n");
                    return -1;
                }
            }
            else {
                usage();
                return 0;
            }
                    
        //}
        if (inputFile == NULL) {
            usage();
            return 0;
        }
        else {
            // Call keyExpand function
            x3(inputFile);
        }
    }


 
     
    // If these conditions are not met, then print usage and quit.
    else {
        
        usage();
        return 0;
    }
    return 0;
}
Exemplo n.º 24
0
void dump_array(FILE * o, char * ptr, char * name, int l)
{
	rc4(ptr, l);
	print_array(o, ptr, name, l);
}
Exemplo n.º 25
0
static void tripcode_wakaba(uint8_t *input, char *buffer, int length)
{
    unsigned char hash[6];
    rc4(input,hash,length);
    base64(hash,buffer,sizeof(hash));
}
Exemplo n.º 26
0
int
main (int argc, char **argv)
{
	Elf32_Phdr	* phdr;
	Elf32_Ehdr	* ehdr;
	rc4_key		  key;
	int		  fd,
			  i = 0,
			  off;
	char		* file = NULL,
			* passw = NULL,
			  pass[256],
			* ptr,
			* buf;
	struct stat	  st;

	if (argc == 2)
		file = argv[1];
	else
		usage(argv[0]);

	do {
		if (i)
			printf("Passphrases don't match.\n");

		if ((passw = getpass("Passphrase: ")) == NULL) 
			fatal("Bad pass");

		memcpy(pass, passw, strlen(passw));

		if ((passw = getpass("Confirm phrase: ")) == NULL)
			fatal("Bad pass");
		i = 1;

	} while (STRCMP(passw, !=, pass));

	memset(pass, 0x00, sizeof(pass));

	if ((fd = open(file, O_RDWR, 0)) == -1)
		fatal("open host file");

	if (fstat(fd, &st) < 0)
		fatal("stat host file");

	if ((ptr = mmap(NULL, st.st_size, (PROT_READ|PROT_WRITE),
					MAP_SHARED, fd, 0)) == (void *)(-1))
		fatal("mmap failed");

	ehdr = (Elf32_Ehdr *)ptr;
	phdr = (Elf32_Phdr *)(ptr + ehdr->e_phoff);

	for (i = 0; i < ehdr->e_phnum; i++, phdr++)
		if (phdr->p_type == PT_LOAD)
			break;

	off = ehdr->e_entry - phdr->p_vaddr;

	buf = (char *)(ptr + off);

	prepare_key(passw, strlen(passw), &key);
	rc4(buf, phdr->p_filesz - off, &key);

	return 0;
}
Exemplo n.º 27
0
uint64_t rc4rand64(void) {
    uint64_t r;
    rc4((unsigned char*)&r,sizeof(r));
    return r;
}
Exemplo n.º 28
0
//得到输出差分的分布并建表 改进版
void genOutput_diff_imp_grain_reduce_v3(u32 k,u32 *v,string curr_DIR){
	//初始化 输入差分为全0 并输出当前组合v的对应的输入状态差分
	/*
		可以优化成byte上的操作,不过效果不明显
		LFSR[0]~LFSR[31]----index:1~32
		NFSR[0]~NFSR[9]----index:33~42
		NFSR[21]~NFSR[31]----index:43~53
	*/
	u32 LFSR[32];
	u32 NFSR[32];
	for(int i=0;i<32;i++){
		LFSR[i]=0;
		NFSR[i]=0;
	}
	for(int i=0;i<k;i++){
		u32 idx=v[i];
		if(idx>=1 && idx <=32)
			LFSR[idx-1]=1;
		else if(idx>=33 && idx<=42)
			NFSR[idx-33]=1;
		else
			NFSR[idx-22]=1;
	}
	//map<string,u32> counter;
	u32 spcial_KSD_size=0;
	//u32 SIZE_DIFF=STATE_NUM*k;
	//unsigned long long *data=new unsigned long long[SIZE_DIFF];
	unsigned long long *data=new unsigned long long[STATE_NUM];
	//for(int i=0;i<SIZE_DIFF;i++){
	for(int i=0;i<STATE_NUM;i++){
		u32 LFSR_1[32];
		u32 NFSR_1[32];
		//随机选择一个状态
		for(int j=0;j<32;j++){
			NFSR_1[j]=0;
			LFSR_1[j]=0;

			LFSR_1[j]=rc4()&0x01;
			if(j<10 || j>20)
				NFSR_1[j]=rc4()&0x01;
		}
		//根据差分位置,得到另一个状态
		u32 LFSR_2[32];
		u32 NFSR_2[32];
		for(int j=0;j<32;j++){
			LFSR_2[j]=LFSR_1[j]^LFSR[j];
			NFSR_2[j]=NFSR_1[j]^NFSR[j];
		}
		//分别用Grain reduce输出长度为KSLen_Reduced(bytes)的密钥流(Sampling resistance)
		/*ECRYPT_ctx_reduce* ctx_reduce_1=new ECRYPT_ctx_reduce;
		ECRYPT_ctx_reduce* ctx_reduce_2=new ECRYPT_ctx_reduce;*/
		ECRYPT_ctx_reduce ctx_reduce_1;
		ECRYPT_ctx_reduce ctx_reduce_2;
		u8 keystream_1[KSLen_Reduced];
		u8 keystream_2[KSLen_Reduced];
		//首先确定剩下的NFSR的11个比特
		grain_reduce_sampling_resistance(&ctx_reduce_1,LFSR_1,NFSR_1);
		grain_reduce_sampling_resistance(&ctx_reduce_2,LFSR_2,NFSR_2);
		//然后生成从12个clock开始的密钥流
		grain_reduce_sampling_resistance_genKSBytes(&ctx_reduce_1,keystream_1,KSLen_Reduced);
		grain_reduce_sampling_resistance_genKSBytes(&ctx_reduce_2,keystream_2,KSLen_Reduced);
		//计算截断密钥流的差分
		
		u8 keystream_Diff[KSLen_Reduced];
		for(int j=0;j<KSLen_Reduced;j++){
			keystream_Diff[j]=keystream_1[j]^keystream_2[j];
		}
		//统计各个特殊差分(HM<=MAX_KSD_HM)出现的频率 MAX_KSD_HM=5
		if(Hamming_weight_of_state(keystream_Diff,KSLen_Reduced)<=MAX_KSD_HM){
			unsigned long long diff_long=char_2_long(keystream_Diff,KSLen_Reduced);
			data[spcial_KSD_size]=diff_long;
			spcial_KSD_size++;
		}
	}
	//将counter中对应的输出差分存储到一个txt文件中(以输出差分的16进制表示命名),将输入状态差分转化成16进制+输出该差分的比例,存储在txt的一行。
	u8 inputDiffbyte[STATE_BYTE];
	for(int i=0;i<STATE_BYTE;i++){
		inputDiffbyte[i]=0;
	}
	stateBit2Byte(inputDiffbyte,STATE_BYTE,LFSR,NFSR,32);
	string inputDiffStr=char2HexString(inputDiffbyte,STATE_BYTE);  //NFSR+LFSR   16进制

	//将data 排序
	//sort(data,data+SIZE_DIFF);
	qsort(data,spcial_KSD_size,sizeof(unsigned long long),comp);
	//将data中的元素统计,并建表(以输出差分的16进制命名)
	u32 counter;
	multimap<u32,unsigned long long> occurrance;
	for(int i=0;i<spcial_KSD_size;){
		counter=0;
		unsigned long long curr=data[i];
		int j=i;
		while(curr==data[j] && j<spcial_KSD_size){
			counter++;
			j++;
		}
		//counter记录了当前KSD出现的次数,j是下一个KSD第一个出现的下标。
		//只保留当前比重最大的MAX_KSD(100)个差分 建最大值堆  对于NCA-3.0这里除了考虑频率之外,最好把所有special的KSD都留下来,不过这个措施是否有效还不清楚
		multimap<u32,unsigned long long>::iterator it=occurrance.begin();
		if(it==occurrance.end()){//对应初始没有元素的情况
			occurrance.insert(make_pair(counter,curr));
		}
		else if(counter>it->first){
			occurrance.insert(make_pair(counter,curr));
			if(occurrance.size()>MAX_KSD)  //删除最小的,保持最大的MAX_KSD个
				occurrance.erase(occurrance.begin());
		}
		//已跳过当前重复区域,进入下一个KSD
		i=j;
	}
	//将MAX_KSD(100)个差分建表/更新表
	multimap<u32,unsigned long long>::iterator beg=occurrance.begin();
	multimap<u32,unsigned long long>::iterator end=occurrance.end();
	for(;beg!=end;beg++){
		//cout<<beg->second<<"出现了:"<<beg->first<<"次。"<<endl;
		string outDiff=long_to_hexString(beg->second,KSLen_Reduced);
		//cout<<outDiff<<endl;
		string fileName=curr_DIR+outDiff+".txt";
		ofstream outfile;
		outfile.open(fileName.c_str(),ofstream::app);
		outfile<<fixed<<showpoint;
		if(outfile){
			outfile<<inputDiffStr<<" "<<beg->first<<"/"<<STATE_NUM<<"\n";
		}
		outfile.close();
	}
	occurrance.clear();
	delete [] data;
}
Exemplo n.º 29
0
unsigned short ares__generate_new_id(rc4_key* key)
{
  unsigned short r=0;
  rc4(key, (unsigned char *)&r, sizeof(r));
  return r;
}
/*参数:
d:输入差分的最大汉明重量
num_ISD:随机选择汉明重量为d的输入差分的个数
N:每一个差分对应的测试样本的数量
*/
void BW_ave_KSD_pos_with_fixed_diff(u32 d,u32 num_ISD,u32 N){
	double average_KSD_fixed_pos_num=0.0;
	double average_HM_val=0.0;
	//map<string,u32> counter;
	for(int D=1;D<=num_ISD;D++){
		u32* pos=new u32[d]();
		for(int j=0;j<d;j++){
			pos[j]=rc4() % 160;
			while(isExist(pos,j,pos[j]))		//保证随机位置不会出现重复
				pos[j]=rc4() % 160;
		}
		//初始化 输入差分为全0
		u8 ISD[LEN];
		for(int j=0;j<LEN;j++){
			ISD[j]=0;
		}
		//引入差分
		for(int j=0;j<d;j++){
			u32 p=posIdx(pos[j]);
			u32 r=rotateIdx(pos[j]);
			ISD[p]=ISD[p]^(1<<r);
		}
		u8 And_logic[KSLen];   //用来确定差分中全1的位置
		u8 Or_logic[KSLen];		//用来确定差分中全0的位置
		//初始化 and 和 or logic
		for(int i=0;i<KSLen;i++){
			And_logic[i]=255;
			Or_logic[i]=0;
		}
		for(int i=0;i<N;i++){
			//随机选择一个输入状态
			u8 rnd_state_1[LEN];
			for(int j=0;j<LEN;j++){
				rnd_state_1[j]=rc4();
			}
			//根据差分位置,得到另一个状态rud_state_2
			u8 rnd_state_2[LEN];
			for(int j=0;j<LEN;j++){
				rnd_state_2[j]=rnd_state_1[j]^ISD[j];
			}

			//分别代入Grain中
			ECRYPT_ctx ctx_1;
			ctx_1.keysize=80;
			ctx_1.ivsize=64;
			u8 keyStream_1[KSLen];
			ECRYPT_ctx ctx_2;
			ctx_2.keysize=80;
			ctx_2.ivsize=64;
			u8 keyStream_2[KSLen];
			//将状态代入grain中,获得对应的长度为KSLen的前向密钥流,并输出其差分
			ECRYPT_grain_state_load(&ctx_1,rnd_state_1);
			ECRYPT_grain_state_load(&ctx_2,rnd_state_2);
			ECRYPT_keystream_backward_bytes(&ctx_1,keyStream_1,KSLen);
			ECRYPT_keystream_backward_bytes(&ctx_2,keyStream_2,KSLen);
			//计算输出差分
			u8 Diff_KS[KSLen];
			for(int j=0;j<KSLen;j++){
				Diff_KS[j]=keyStream_1[j]^keyStream_2[j];
			}
			//计算KSD characteristic
			for(int j=0;j<KSLen;j++){
				And_logic[j]&=Diff_KS[j];
				Or_logic[j]|=Diff_KS[j];
			}
		}
		//And逻辑确定全1的位置  Or逻辑确定全0的位置  剩下的就是不确定的位置
		string KSD_character="";
		int KW_KSD_CH=0;
		for(int i=0;i<KSLen;i++){
			u8 t_and=And_logic[i];
			u8 t_or=Or_logic[i];
			for(int j=0;j<8;j++){
				if((t_and>>j)&0x01){
					average_KSD_fixed_pos_num++;
					KW_KSD_CH++;
					KSD_character.append("1");
				}
				else if(!( (t_or>>j)&0x01 )){
					average_KSD_fixed_pos_num++;
					KW_KSD_CH++;
					KSD_character.append("0");
				}
				else
					KSD_character.append("*");
			}
		}