double QgsTolerance::computeMapUnitPerPixel( QgsMapLayer* layer, const QgsMapSettings& mapSettings )
{
if ( ! mapSettings.hasCrsTransformEnabled() )
{
// if the on-the-fly projections are not enabled, layer units pre pixel are the same as map units per pixel
return mapSettings.mapUnitsPerPixel();
}
// the layer is projected. Find out how many pixels are in one map unit - either horizontal and vertical direction
// this check might not work correctly in some cases
// (on a large area the pixels projected around "0,0" can have different properties from the actual point)
QgsPoint p1 = toLayerCoordinates( layer, mapSettings, QPoint( 0, 1 ) );
QgsPoint p2 = toLayerCoordinates( layer, mapSettings, QPoint( 0, 2 ) );
QgsPoint p3 = toLayerCoordinates( layer, mapSettings, QPoint( 1, 0 ) );
QgsPoint p4 = toLayerCoordinates( layer, mapSettings, QPoint( 2, 0 ) );
double x = p1.sqrDist( p2 );
double y = p3.sqrDist( p4 );
if ( x > y )
{
return sqrt( x );
}
else
{
return sqrt( y );
}
}
void QgsMapToolOffsetCurve::canvasMoveEvent( QgsMapMouseEvent* e )
{
delete mSnapVertexMarker;
mSnapVertexMarker = nullptr;
if ( !mOriginalGeometry || !mRubberBand )
{
return;
}
QgsVectorLayer* layer = currentVectorLayer();
if ( !layer )
{
return;
}
mGeometryModified = true;
//get offset from current position rectangular to feature
QgsPoint layerCoords = toLayerCoordinates( layer, e->pos() );
//snap cursor to background layers
QgsPointLocator::Match m = mCanvas->snappingUtils()->snapToMap( e->pos() );
if ( m.isValid() )
{
if (( m.layer() && m.layer()->id() != mSourceLayerId ) || m.featureId() != mModifiedFeature )
{
layerCoords = toLayerCoordinates( layer, m.point() );
mSnapVertexMarker = new QgsVertexMarker( mCanvas );
mSnapVertexMarker->setIconType( QgsVertexMarker::ICON_CROSS );
mSnapVertexMarker->setColor( Qt::green );
mSnapVertexMarker->setPenWidth( 1 );
mSnapVertexMarker->setCenter( m.point() );
}
}
QgsPoint minDistPoint;
int beforeVertex;
double leftOf;
double offset = sqrt( mOriginalGeometry->closestSegmentWithContext( layerCoords, minDistPoint, beforeVertex, &leftOf ) );
if ( offset == 0.0 )
{
return;
}
if ( mDistanceWidget )
{
// this will also set the rubber band
mDistanceWidget->setValue( leftOf < 0 ? offset : -offset );
mDistanceWidget->setFocus( Qt::TabFocusReason );
}
else
{
//create offset geometry using geos
setOffsetForRubberBand( leftOf < 0 ? offset : -offset );
}
}
int QgsMapToolCapture::nextPoint( const QgsPoint &mapPoint, QgsPoint &layerPoint )
{
QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( mCanvas->currentLayer() );
if ( !vlayer )
{
QgsDebugMsg( QStringLiteral( "no vector layer" ) );
return 1;
}
try
{
QgsPointXY mapP( mapPoint.x(), mapPoint.y() ); //#spellok
layerPoint = QgsPoint( toLayerCoordinates( vlayer, mapP ) ); //transform snapped point back to layer crs //#spellok
if ( QgsWkbTypes::hasZ( vlayer->wkbType() ) )
layerPoint.addZValue( defaultZValue() );
if ( QgsWkbTypes::hasM( vlayer->wkbType() ) )
layerPoint.addMValue( 0.0 );
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse )
QgsDebugMsg( QStringLiteral( "transformation to layer coordinate failed" ) );
return 2;
}
return 0;
}
void QgsGrassEditTool::canvasMoveEvent( QMouseEvent * event )
{
QgsPoint point = toLayerCoordinates( e->layer(), event->pos() );
mouseMove( point );
e->statusBar()->showMessage( e->mCanvasPrompt );
}
bool QgsMapToolIdentify::identifyRasterLayer( QgsRasterLayer *layer, int x, int y )
{
bool res = true;
if ( !layer )
return false;
QgsRasterDataProvider *dprovider = layer->dataProvider();
if ( dprovider && ( dprovider->capabilities() & QgsRasterDataProvider::Identify ) == 0 )
return false;
QMap< QString, QString > attributes, derivedAttributes;
QgsPoint idPoint = mCanvas->getCoordinateTransform()->toMapCoordinates( x, y );
idPoint = toLayerCoordinates( layer, idPoint );
QString type;
if ( layer->providerType() == "wms" )
{
type = tr( "WMS layer" );
//if WMS layer does not cover the view origin,
//we need to map the view pixel coordinates
//to WMS layer pixel coordinates
QgsRectangle viewExtent = mCanvas->extent();
QgsRectangle layerExtent = layer->extent();
double mapUnitsPerPixel = mCanvas->mapUnitsPerPixel();
if ( mapUnitsPerPixel > 0 && viewExtent.intersects( layerExtent ) )
{
double xMinView = viewExtent.xMinimum();
double yMaxView = viewExtent.yMaximum();
double xMinLayer = layerExtent.xMinimum();
double yMaxLayer = layerExtent.yMaximum();
idPoint.set(
xMinView < xMinLayer ? floor( x - ( xMinLayer - xMinView ) / mapUnitsPerPixel ) : x,
yMaxView > yMaxLayer ? floor( y - ( yMaxView - yMaxLayer ) / mapUnitsPerPixel ) : y
);
attributes.insert( tr( "Feature info" ), layer->identifyAsHtml( idPoint ) );
}
else
{
res = false;
}
}
else
{
type = tr( "Raster" );
res = layer->extent().contains( idPoint ) && layer->identify( idPoint, attributes );
}
if ( res )
{
derivedAttributes.insert( tr( "(clicked coordinate)" ), idPoint.toString() );
results()->addFeature( layer, type, attributes, derivedAttributes );
}
return res;
}
void QgsMapToolRotateFeature::canvasReleaseEvent( QMouseEvent * e )
{
Q_UNUSED( e );
if ( !mRubberBand )
{
return;
}
QgsVectorLayer* vlayer = currentVectorLayer();
if ( !vlayer )
{
return;
}
//calculations for affine transformation
double angle = -1 * mRotation * ( PI / 180 );
QgsPoint anchorPoint = toLayerCoordinates( vlayer, mStartPointMapCoords );
double a = cos( angle );
double b = -1 * sin( angle );
double c = anchorPoint.x() - cos( angle ) * anchorPoint.x() + sin( angle ) * anchorPoint.y();
double d = sin( angle );
double ee = cos( angle );
double f = anchorPoint.y() - sin( angle ) * anchorPoint.x() - cos( angle ) * anchorPoint.y();
vlayer->beginEditCommand( tr( "Features Rotated" ) );
int start;
if ( vlayer->geometryType() == 2 )
{
start = 1;
}
else
{
start = 0;
}
int i = 0;
foreach ( QgsFeatureId id, mRotatedFeatures )
{
QgsFeature feat;
vlayer->getFeatures( QgsFeatureRequest().setFilterFid( id ) ).nextFeature( feat );
QgsGeometry* geom = feat.geometry();
i = start;
QgsPoint vertex = geom->vertexAt( i );
while ( vertex != QgsPoint( 0, 0 ) )
{
double newX = a * vertex.x() + b * vertex.y() + c;
double newY = d * vertex.x() + ee * vertex.y() + f;
vlayer->moveVertex( newX, newY, id, i );
i = i + 1;
vertex = geom->vertexAt( i );
}
}
void QgsMapToolRotateFeature::applyRotation( double rotation )
{
mRotation = rotation;
mRotationActive = false;
QgsVectorLayer *vlayer = currentVectorLayer();
if ( !vlayer )
{
deleteRubberband();
notifyNotVectorLayer();
return;
}
//calculations for affine transformation
double angle = -1 * mRotation * ( M_PI / 180 );
QgsPointXY anchorPoint = toLayerCoordinates( vlayer, mStartPointMapCoords );
double a = std::cos( angle );
double b = -1 * std::sin( angle );
double c = anchorPoint.x() - std::cos( angle ) * anchorPoint.x() + std::sin( angle ) * anchorPoint.y();
double d = std::sin( angle );
double ee = std::cos( angle );
double f = anchorPoint.y() - std::sin( angle ) * anchorPoint.x() - std::cos( angle ) * anchorPoint.y();
vlayer->beginEditCommand( tr( "Features Rotated" ) );
int start;
if ( vlayer->geometryType() == 2 )
{
start = 1;
}
else
{
start = 0;
}
int i = 0;
Q_FOREACH ( QgsFeatureId id, mRotatedFeatures )
{
QgsFeature feat;
vlayer->getFeatures( QgsFeatureRequest().setFilterFid( id ) ).nextFeature( feat );
QgsGeometry geom = feat.geometry();
i = start;
QgsPointXY vertex = geom.vertexAt( i );
while ( vertex != QgsPointXY( 0, 0 ) )
{
double newX = a * vertex.x() + b * vertex.y() + c;
double newY = d * vertex.x() + ee * vertex.y() + f;
vlayer->moveVertex( newX, newY, id, i );
i = i + 1;
vertex = geom.vertexAt( i );
}
}
double QgsTolerance::computeMapUnitPerPixel( QgsMapLayer *layer, const QgsMapSettings &mapSettings )
{
// the layer is projected. Find out how many pixels are in one map unit - either horizontal and vertical direction
// this check might not work correctly in some cases
// (on a large area the pixels projected around "0,0" can have different properties from the actual point)
QgsPointXY p1 = toLayerCoordinates( layer, mapSettings, QPoint( 0, 1 ) );
QgsPointXY p2 = toLayerCoordinates( layer, mapSettings, QPoint( 0, 2 ) );
QgsPointXY p3 = toLayerCoordinates( layer, mapSettings, QPoint( 1, 0 ) );
QgsPointXY p4 = toLayerCoordinates( layer, mapSettings, QPoint( 2, 0 ) );
double x = p1.sqrDist( p2 );
double y = p3.sqrDist( p4 );
if ( x > y )
{
return std::sqrt( x );
}
else
{
return std::sqrt( y );
}
}
void QgsGrassEditTool::canvasPressEvent( QMouseEvent * event )
{
QgsPoint point = toLayerCoordinates( e->layer(), event->pos() );
mouseClick( point, event->button() );
// Set last click
e->mLastPoint = point;
e->statusBar()->showMessage( e->mCanvasPrompt );
QgsDebugMsg( QString( "n_points = %1" ).arg( e->mEditPoints->n_points ) );
}
int QgsMapToolCapture::nextPoint( const QPoint &p, QgsPoint &layerPoint, QgsPoint &mapPoint )
{
QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( mCanvas->currentLayer() );
if ( !vlayer )
{
QgsDebugMsg( "no vector layer" );
return 1;
}
QgsPoint digitisedPoint;
try
{
digitisedPoint = toLayerCoordinates( vlayer, p );
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse );
QgsDebugMsg( "transformation to layer coordinate failed" );
return 2;
}
QList<QgsSnappingResult> snapResults;
if ( mSnapper.snapToBackgroundLayers( p, snapResults ) == 0 )
{
mapPoint = snapPointFromResults( snapResults, p );
try
{
layerPoint = toLayerCoordinates( vlayer, mapPoint ); //transform snapped point back to layer crs
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse );
QgsDebugMsg( "transformation to layer coordinate failed" );
return 2;
}
}
return 0;
}
QgsGeometry QgsMapToolDeleteRing::ringUnderPoint( const QgsPoint &p, QgsFeatureId &fid, int &partNum, int &ringNum )
{
//There is no clean way to find if we are inside the ring of a feature,
//so we iterate over all the features visible in the canvas
//If several rings are found at this position, the smallest one is chosen,
//in order to be able to delete a ring inside another ring
QgsFeatureIterator fit = vlayer->getFeatures( QgsFeatureRequest().setFilterRect( toLayerCoordinates( vlayer, mCanvas->extent() ) ) );
QgsFeature f;
QgsGeometry g;
QgsGeometry ringGeom;
QgsMultiPolygon pol;
QgsPolygon tempPol;
QgsGeometry tempGeom;
double area = std::numeric_limits<double>::max();
while ( fit.nextFeature( f ) )
{
g = f.geometry();
if ( g.isNull() )
continue;
if ( g.wkbType() == QgsWkbTypes::Polygon || g.wkbType() == QgsWkbTypes::Polygon25D )
{
pol = QgsMultiPolygon() << g.asPolygon();
}
else
{
pol = g.asMultiPolygon();
}
for ( int i = 0; i < pol.size() ; ++i )
{
//for each part
if ( pol[i].size() > 1 )
{
for ( int j = 1; j < pol[i].size(); ++j )
{
tempPol = QgsPolygon() << pol[i][j];
tempGeom = QgsGeometry::fromPolygon( tempPol );
if ( tempGeom.area() < area && tempGeom.contains( &p ) )
{
fid = f.id();
partNum = i;
ringNum = j;
area = tempGeom.area();
ringGeom = tempGeom;
}
}
}
}
}
return ringGeom;
}
void QgsMapToolMoveFeature::canvasReleaseEvent( QgsMapMouseEvent* e )
{
//QgsDebugMsg("entering.");
if ( !mRubberBand )
{
return;
}
QgsVectorLayer* vlayer = currentVectorLayer();
if ( !vlayer )
{
return;
}
QgsPoint startPointLayerCoords = toLayerCoordinates(( QgsMapLayer* )vlayer, mStartPointMapCoords );
QgsPoint stopPointLayerCoords = toLayerCoordinates(( QgsMapLayer* )vlayer, e->pos() );
double dx = stopPointLayerCoords.x() - startPointLayerCoords.x();
double dy = stopPointLayerCoords.y() - startPointLayerCoords.y();
vlayer->beginEditCommand( tr( "Feature moved" ) );
Q_FOREACH ( QgsFeatureId id, mMovedFeatures )
{
vlayer->translateFeature( id, dx, dy );
}
void QgsMapToolDeleteRing::canvasPressEvent( QgsMapMouseEvent* e )
{
delete mRubberBand;
mRubberBand = 0;
mPressedFid = -1;
mPressedPartNum = -1;
mPressedRingNum = -1;
QgsMapLayer* currentLayer = mCanvas->currentLayer();
if ( !currentLayer )
return;
vlayer = qobject_cast<QgsVectorLayer *>( currentLayer );
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
if ( vlayer->geometryType() != QGis::Polygon )
{
emit messageEmitted( tr( "Delete ring can only be used in a polygon layer." ) );
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
QgsPoint p = toLayerCoordinates( vlayer, e->pos() );
QgsGeometry* ringGeom = ringUnderPoint( p, mPressedFid, mPressedPartNum, mPressedRingNum );
if ( mPressedFid != -1 )
{
QgsFeature f;
vlayer->getFeatures( QgsFeatureRequest().setFilterFid( mPressedFid ) ).nextFeature( f );
mRubberBand = createRubberBand( vlayer->geometryType() );
mRubberBand->setToGeometry( ringGeom, vlayer );
mRubberBand->show();
}
delete ringGeom;
ringGeom = 0;
}
int QgsMapToolEdit::insertSegmentVerticesForSnap( const QList<QgsSnappingResult>& snapResults, QgsVectorLayer* editedLayer )
{
QgsPoint layerPoint;
if ( !editedLayer || !editedLayer->isEditable() )
{
return 1;
}
//transform snaping coordinates to layer crs first
QList<QgsSnappingResult> transformedSnapResults = snapResults;
QList<QgsSnappingResult>::iterator it = transformedSnapResults.begin();
for ( ; it != transformedSnapResults.constEnd(); ++it )
{
QgsPoint layerPoint = toLayerCoordinates( editedLayer, it->snappedVertex );
it->snappedVertex = layerPoint;
}
return editedLayer->insertSegmentVerticesForSnap( transformedSnapResults );
}
int QgsMapToolCapture::nextPoint( const QgsPoint& mapPoint, QgsPoint& layerPoint )
{
QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( mCanvas->currentLayer() );
if ( !vlayer )
{
QgsDebugMsg( "no vector layer" );
return 1;
}
try
{
layerPoint = toLayerCoordinates( vlayer, mapPoint ); //transform snapped point back to layer crs
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse );
QgsDebugMsg( "transformation to layer coordinate failed" );
return 2;
}
return 0;
}
/**
* Selection routine called by the mouse release event
* @param thePoint = QgsPoint representing the x, y coordinates of the mouse release event
*/
void eVisEventIdTool::select( QgsPoint thePoint )
{
if ( 0 == mCanvas )
return;
QgsVectorLayer* myLayer = ( QgsVectorLayer* )mCanvas->currentLayer( );
// create the search rectangle. this was modeled after the QgsMapIdentifyTool in core QGIS application
double searchWidth = mCanvas->extent( ).width( ) * (( double )QGis::DEFAULT_IDENTIFY_RADIUS / 100.0 );
QgsRectangle myRectangle;
myRectangle.setXMinimum( thePoint.x( ) - searchWidth );
myRectangle.setXMaximum( thePoint.x( ) + searchWidth );
myRectangle.setYMinimum( thePoint.y( ) - searchWidth );
myRectangle.setYMaximum( thePoint.y( ) + searchWidth );
//Transform rectange to map coordinates
myRectangle = toLayerCoordinates( myLayer, myRectangle );
//Rather than add to the current selection, clear all selected features
myLayer->removeSelection( false );
//select features
QgsFeatureIterator fit = myLayer->getFeatures( QgsFeatureRequest().setFilterRect( myRectangle ).setFlags( QgsFeatureRequest::ExactIntersect ).setSubsetOfAttributes( QgsAttributeList() ) );
QgsFeature f;
QgsFeatureIds newSelectedFeatures;
while ( fit.nextFeature( f ) )
{
newSelectedFeatures.insert( f.id() );
}
myLayer->setSelectedFeatures( newSelectedFeatures );
//Launch a new event browser to view selected features
mBrowser = new eVisGenericEventBrowserGui( mCanvas, mCanvas, NULL );
mBrowser->setAttribute( Qt::WA_DeleteOnClose );
}
double QgsMapToolOffsetCurve::calculateOffset( QgsPointXY mapPoint )
{
double offset = 0.0;
if ( mLayer )
{
//get offset from current position rectangular to feature
QgsPointXY layerCoords = toLayerCoordinates( mLayer, mapPoint );
QgsPointXY minDistPoint;
int beforeVertex;
int leftOf = 0;
offset = std::sqrt( mManipulatedGeometry.closestSegmentWithContext( layerCoords, minDistPoint, beforeVertex, &leftOf ) );
if ( QgsWkbTypes::geometryType( mManipulatedGeometry.wkbType() ) == QgsWkbTypes::LineGeometry )
{
offset = leftOf < 0 ? offset : -offset;
}
else
{
offset = mManipulatedGeometry.contains( &layerCoords ) ? -offset : offset;
}
}
return offset;
}
/**
* Selection routine called by the mouse release event
* @param point = QgsPointXY representing the x, y coordinates of the mouse release event
*/
void eVisEventIdTool::select( const QgsPointXY &point )
{
if ( !mCanvas )
return;
QgsVectorLayer *myLayer = ( QgsVectorLayer * )mCanvas->currentLayer();
// create the search rectangle. this was modeled after the QgsMapIdentifyTool in core QGIS application
double searchWidth = QgsMapTool::searchRadiusMU( mCanvas );
QgsRectangle myRectangle;
myRectangle.setXMinimum( point.x() - searchWidth );
myRectangle.setXMaximum( point.x() + searchWidth );
myRectangle.setYMinimum( point.y() - searchWidth );
myRectangle.setYMaximum( point.y() + searchWidth );
//Transform rectangle to map coordinates
myRectangle = toLayerCoordinates( myLayer, myRectangle );
//select features
QgsFeatureIterator fit = myLayer->getFeatures( QgsFeatureRequest().setFilterRect( myRectangle ).setFlags( QgsFeatureRequest::ExactIntersect ).setSubsetOfAttributes( QgsAttributeList() ) );
QgsFeature f;
QgsFeatureIds newSelectedFeatures;
while ( fit.nextFeature( f ) )
{
newSelectedFeatures.insert( f.id() );
}
myLayer->selectByIds( newSelectedFeatures );
//Launch a new event browser to view selected features
mBrowser = new eVisGenericEventBrowserGui( mCanvas, mCanvas, nullptr );
mBrowser->setAttribute( Qt::WA_DeleteOnClose );
}
QgsGeometry* QgsMapToolDeletePart::partUnderPoint( QPoint point, int& fid, int& partNum )
{
QgsFeature f;
QgsGeometry* geomPart = new QgsGeometry();
switch ( vlayer->geometryType() )
{
case QGis::Point:
case QGis::Line:
{
if ( mSnapper.snapToCurrentLayer( point, mRecentSnappingResults, QgsSnapper::SnapToVertexAndSegment ) == 0 )
{
if ( mRecentSnappingResults.length() > 0 )
{
QgsSnappingResult sr = mRecentSnappingResults.first();
int snapVertex = sr.snappedVertexNr;
if ( snapVertex == -1 )
snapVertex = sr.beforeVertexNr;
vlayer->getFeatures( QgsFeatureRequest().setFilterFid( sr.snappedAtGeometry ) ).nextFeature( f );
QgsGeometry* g = f.geometry();
if ( !g->isMultipart() )
return geomPart;
if ( g->wkbType() == QGis::WKBMultiPoint || g->wkbType() == QGis::WKBMultiPoint25D )
{
fid = sr.snappedAtGeometry;
partNum = snapVertex;
return QgsGeometry::fromPoint( sr.snappedVertex );
}
if ( g->wkbType() == QGis::WKBMultiLineString || g->wkbType() == QGis::WKBMultiLineString25D )
{
QgsMultiPolyline mline = g->asMultiPolyline();
for ( int part = 0; part < mline.count(); part++ )
{
if ( snapVertex < mline[part].count() )
{
fid = sr.snappedAtGeometry;
partNum = part;
return QgsGeometry::fromPolyline( mline[part] );
}
snapVertex -= mline[part].count();
}
}
}
}
break;
}
case QGis::Polygon:
{
QgsPoint layerCoords = toLayerCoordinates( vlayer, point );
double searchRadius = QgsTolerance::vertexSearchRadius( mCanvas->currentLayer(), mCanvas->mapSettings() );
QgsRectangle selectRect( layerCoords.x() - searchRadius, layerCoords.y() - searchRadius,
layerCoords.x() + searchRadius, layerCoords.y() + searchRadius );
QgsFeatureIterator fit = vlayer->getFeatures( QgsFeatureRequest().setFilterRect( selectRect ) );
fit.nextFeature( f );
QgsGeometry* g = f.geometry();
if ( !g )
return geomPart;
if ( !g->isMultipart() )
return geomPart;
QgsMultiPolygon mpolygon = g->asMultiPolygon();
for ( int part = 0; part < mpolygon.count(); part++ ) // go through the polygons
{
const QgsPolygon& polygon = mpolygon[part];
QgsGeometry* partGeo = QgsGeometry::fromPolygon( polygon );
if ( partGeo->contains( &layerCoords ) )
{
fid = f.id();
partNum = part;
return partGeo;
}
}
break;
}
default:
{
break;
}
}
return geomPart;
}
bool QgsMapToolFeatureAction::doAction( QgsVectorLayer *layer, int x, int y )
{
if ( !layer )
return false;
QgsPoint point = mCanvas->getCoordinateTransform()->toMapCoordinates( x, y );
QgsFeatureList featList;
// toLayerCoordinates will throw an exception for an 'invalid' point.
// For example, if you project a world map onto a globe using EPSG 2163
// and then click somewhere off the globe, an exception will be thrown.
try
{
// create the search rectangle
double searchRadius = searchRadiusMU( mCanvas );
QgsRectangle r;
r.setXMinimum( point.x() - searchRadius );
r.setXMaximum( point.x() + searchRadius );
r.setYMinimum( point.y() - searchRadius );
r.setYMaximum( point.y() + searchRadius );
r = toLayerCoordinates( layer, r );
QgsFeatureIterator fit = layer->getFeatures( QgsFeatureRequest().setFilterRect( r ).setFlags( QgsFeatureRequest::ExactIntersect ) );
QgsFeature f;
while ( fit.nextFeature( f ) )
featList << QgsFeature( f );
}
catch ( QgsCsException & cse )
{
Q_UNUSED( cse );
// catch exception for 'invalid' point and proceed with no features found
QgsDebugMsg( QString( "Caught CRS exception %1" ).arg( cse.what() ) );
}
if ( featList.size() == 0 )
return false;
Q_FOREACH ( const QgsFeature& feat, featList )
{
if ( layer->actions()->defaultAction() >= 0 )
{
// define custom substitutions: layer id and clicked coords
QMap<QString, QVariant> substitutionMap;
substitutionMap.insert( "$layerid", layer->id() );
point = toLayerCoordinates( layer, point );
substitutionMap.insert( "$clickx", point.x() );
substitutionMap.insert( "$clicky", point.y() );
int actionIdx = layer->actions()->defaultAction();
layer->actions()->doAction( actionIdx, feat, &substitutionMap );
}
else
{
QgsMapLayerAction* mapLayerAction = QgsMapLayerActionRegistry::instance()->defaultActionForLayer( layer );
if ( mapLayerAction )
{
mapLayerAction->triggerForFeature( layer, &feat );
}
}
}
return true;
}
void QgsMapToolDigitizeFeature::cadCanvasReleaseEvent( QgsMapMouseEvent *e )
{
QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( mLayer );
if ( !vlayer )
//if no given layer take the current from canvas
vlayer = currentVectorLayer();
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
QgsWkbTypes::Type layerWKBType = vlayer->wkbType();
QgsVectorDataProvider *provider = vlayer->dataProvider();
if ( !( provider->capabilities() & QgsVectorDataProvider::AddFeatures ) )
{
emit messageEmitted( tr( "The data provider for this layer does not support the addition of features." ), Qgis::Warning );
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
// POINT CAPTURING
if ( mode() == CapturePoint )
{
if ( e->button() != Qt::LeftButton )
return;
//check we only use this tool for point/multipoint layers
if ( vlayer->geometryType() != QgsWkbTypes::PointGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture point' tool on this vector layer" ), Qgis::Warning );
return;
}
QgsPointXY savePoint; //point in layer coordinates
try
{
QgsPoint fetchPoint;
int res;
res = fetchLayerPoint( e->mapPointMatch(), fetchPoint );
if ( res == 0 )
{
savePoint = QgsPointXY( fetchPoint.x(), fetchPoint.y() );
}
else
{
savePoint = toLayerCoordinates( vlayer, e->mapPoint() );
}
QgsDebugMsg( "savePoint = " + savePoint.toString() );
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse );
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), Qgis::Warning );
return;
}
//only do the rest for provider with feature addition support
//note that for the grass provider, this will return false since
//grass provider has its own mechanism of feature addition
if ( provider->capabilities() & QgsVectorDataProvider::AddFeatures )
{
QgsFeature f( vlayer->fields(), 0 );
QgsGeometry g;
if ( layerWKBType == QgsWkbTypes::Point )
{
g = QgsGeometry::fromPointXY( savePoint );
}
else if ( !QgsWkbTypes::isMultiType( layerWKBType ) && QgsWkbTypes::hasZ( layerWKBType ) )
{
g = QgsGeometry( new QgsPoint( QgsWkbTypes::PointZ, savePoint.x(), savePoint.y(), defaultZValue() ) );
}
else if ( QgsWkbTypes::isMultiType( layerWKBType ) && !QgsWkbTypes::hasZ( layerWKBType ) )
{
g = QgsGeometry::fromMultiPointXY( QgsMultiPointXY() << savePoint );
}
else if ( QgsWkbTypes::isMultiType( layerWKBType ) && QgsWkbTypes::hasZ( layerWKBType ) )
{
QgsMultiPoint *mp = new QgsMultiPoint();
mp->addGeometry( new QgsPoint( QgsWkbTypes::PointZ, savePoint.x(), savePoint.y(), defaultZValue() ) );
g = QgsGeometry( mp );
}
else
{
// if layer supports more types (mCheckGeometryType is false)
g = QgsGeometry::fromPointXY( savePoint );
}
if ( QgsWkbTypes::hasM( layerWKBType ) )
{
g.get()->addMValue();
}
f.setGeometry( g );
f.setValid( true );
digitized( f );
// we are done with digitizing for now so instruct advanced digitizing dock to reset its CAD points
cadDockWidget()->clearPoints();
}
}
// LINE AND POLYGON CAPTURING
else if ( mode() == CaptureLine || mode() == CapturePolygon )
{
//check we only use the line tool for line/multiline layers
if ( mode() == CaptureLine && vlayer->geometryType() != QgsWkbTypes::LineGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture line' tool on this vector layer" ), Qgis::Warning );
return;
}
//check we only use the polygon tool for polygon/multipolygon layers
if ( mode() == CapturePolygon && vlayer->geometryType() != QgsWkbTypes::PolygonGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture polygon' tool on this vector layer" ), Qgis::Warning );
return;
}
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->mapPoint(), e->mapPointMatch() );
if ( error == 1 )
{
//current layer is not a vector layer
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), Qgis::Warning );
return;
}
startCapturing();
}
else if ( e->button() == Qt::RightButton )
{
// End of string
deleteTempRubberBand();
//lines: bail out if there are not at least two vertices
if ( mode() == CaptureLine && size() < 2 )
{
stopCapturing();
return;
}
//polygons: bail out if there are not at least two vertices
if ( mode() == CapturePolygon && size() < 3 )
{
stopCapturing();
return;
}
if ( mode() == CapturePolygon )
{
closePolygon();
}
//create QgsFeature with wkb representation
std::unique_ptr< QgsFeature > f( new QgsFeature( vlayer->fields(), 0 ) );
//does compoundcurve contain circular strings?
//does provider support circular strings?
bool hasCurvedSegments = captureCurve()->hasCurvedSegments();
bool providerSupportsCurvedSegments = vlayer->dataProvider()->capabilities() & QgsVectorDataProvider::CircularGeometries;
QList<QgsPointLocator::Match> snappingMatchesList;
QgsCurve *curveToAdd = nullptr;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
curveToAdd = captureCurve()->clone();
}
else
{
curveToAdd = captureCurve()->curveToLine();
snappingMatchesList = snappingMatches();
}
if ( mode() == CaptureLine )
{
QgsGeometry g( curveToAdd );
f->setGeometry( g );
}
else
{
QgsCurvePolygon *poly = nullptr;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
poly = new QgsCurvePolygon();
}
else
{
poly = new QgsPolygon();
}
poly->setExteriorRing( curveToAdd );
QgsGeometry g( poly );
f->setGeometry( g );
QgsGeometry featGeom = f->geometry();
int avoidIntersectionsReturn = featGeom.avoidIntersections( QgsProject::instance()->avoidIntersectionsLayers() );
f->setGeometry( featGeom );
if ( avoidIntersectionsReturn == 1 )
{
//not a polygon type. Impossible to get there
}
if ( f->geometry().isEmpty() ) //avoid intersection might have removed the whole geometry
{
emit messageEmitted( tr( "The feature cannot be added because it's geometry collapsed due to intersection avoidance" ), Qgis::Critical );
stopCapturing();
return;
}
}
f->setValid( true );
digitized( *f );
stopCapturing();
}
}
}
void QgsMapToolAddFeature::canvasReleaseEvent( QMouseEvent * e )
{
QgsDebugMsg( "entered." );
QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( mCanvas->currentLayer() );
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
QGis::WkbType layerWKBType = vlayer->wkbType();
QgsVectorDataProvider* provider = vlayer->dataProvider();
if ( !( provider->capabilities() & QgsVectorDataProvider::AddFeatures ) )
{
QMessageBox::information( 0, tr( "Layer cannot be added to" ),
tr( "The data provider for this layer does not support the addition of features." ) );
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
// POINT CAPTURING
if ( mode() == CapturePoint )
{
//check we only use this tool for point/multipoint layers
if ( vlayer->geometryType() != QGis::Point )
{
QMessageBox::information( 0, tr( "Wrong editing tool" ),
tr( "Cannot apply the 'capture point' tool on this vector layer" ) );
return;
}
QgsPoint idPoint; //point in map coordinates
QList<QgsSnappingResult> snapResults;
QgsPoint savePoint; //point in layer coordinates
if ( mSnapper.snapToBackgroundLayers( e->pos(), snapResults ) == 0 )
{
idPoint = snapPointFromResults( snapResults, e->pos() );
try
{
savePoint = toLayerCoordinates( vlayer, idPoint );
QgsDebugMsg( "savePoint = " + savePoint.toString() );
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse );
QMessageBox::information( 0, tr( "Coordinate transform error" ),
tr( "Cannot transform the point to the layers coordinate system" ) );
return;
}
}
//only do the rest for provider with feature addition support
//note that for the grass provider, this will return false since
//grass provider has its own mechanism of feature addition
if ( provider->capabilities() & QgsVectorDataProvider::AddFeatures )
{
QgsFeature* f = new QgsFeature( 0, "WKBPoint" );
QgsGeometry *g = 0;
if ( layerWKBType == QGis::WKBPoint || layerWKBType == QGis::WKBPoint25D )
{
g = QgsGeometry::fromPoint( savePoint );
}
else if ( layerWKBType == QGis::WKBMultiPoint || layerWKBType == QGis::WKBMultiPoint25D )
{
g = QgsGeometry::fromMultiPoint( QgsMultiPoint() << savePoint );
}
f->setGeometry( g );
vlayer->beginEditCommand( tr( "Feature added" ) );
if ( addFeature( vlayer, f ) )
{
vlayer->endEditCommand();
}
else
{
delete f;
vlayer->destroyEditCommand();
}
mCanvas->refresh();
}
}
else if ( mode() == CaptureLine || mode() == CapturePolygon )
{
//check we only use the line tool for line/multiline layers
if ( mode() == CaptureLine && vlayer->geometryType() != QGis::Line )
{
QMessageBox::information( 0, tr( "Wrong editing tool" ),
tr( "Cannot apply the 'capture line' tool on this vector layer" ) );
return;
}
//check we only use the polygon tool for polygon/multipolygon layers
if ( mode() == CapturePolygon && vlayer->geometryType() != QGis::Polygon )
{
QMessageBox::information( 0, tr( "Wrong editing tool" ),
tr( "Cannot apply the 'capture polygon' tool on this vector layer" ) );
return;
}
//add point to list and to rubber band
int error = addVertex( e->pos() );
if ( error == 1 )
{
//current layer is not a vector layer
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
QMessageBox::information( 0, tr( "Coordinate transform error" ),
tr( "Cannot transform the point to the layers coordinate system" ) );
return;
}
if ( e->button() == Qt::LeftButton )
{
startCapturing();
}
else if ( e->button() == Qt::RightButton )
{
// End of string
//lines: bail out if there are not at least two vertices
if ( mode() == CaptureLine && size() < 2 )
{
stopCapturing();
return;
}
//polygons: bail out if there are not at least two vertices
if ( mode() == CapturePolygon && size() < 3 )
{
stopCapturing();
return;
}
//create QgsFeature with wkb representation
QgsFeature* f = new QgsFeature( 0, "WKBLineString" );
QgsGeometry *g;
if ( mode() == CaptureLine )
{
if ( layerWKBType == QGis::WKBLineString || layerWKBType == QGis::WKBLineString25D )
{
g = QgsGeometry::fromPolyline( points().toVector() );
}
else if ( layerWKBType == QGis::WKBMultiLineString || layerWKBType == QGis::WKBMultiLineString25D )
{
g = QgsGeometry::fromMultiPolyline( QgsMultiPolyline() << points().toVector() );
}
else
{
QMessageBox::critical( 0, tr( "Error" ), tr( "Cannot add feature. Unknown WKB type" ) );
stopCapturing();
return; //unknown wkbtype
}
f->setGeometry( g );
}
else // polygon
{
if ( layerWKBType == QGis::WKBPolygon || layerWKBType == QGis::WKBPolygon25D )
{
g = QgsGeometry::fromPolygon( QgsPolygon() << points().toVector() );
}
else if ( layerWKBType == QGis::WKBMultiPolygon || layerWKBType == QGis::WKBMultiPolygon25D )
{
g = QgsGeometry::fromMultiPolygon( QgsMultiPolygon() << ( QgsPolygon() << points().toVector() ) );
}
else
{
QMessageBox::critical( 0, tr( "Error" ), tr( "Cannot add feature. Unknown WKB type" ) );
stopCapturing();
return; //unknown wkbtype
}
if ( !g )
{
stopCapturing();
delete f;
return; // invalid geometry; one possibility is from duplicate points
}
f->setGeometry( g );
int avoidIntersectionsReturn = f->geometry()->avoidIntersections();
if ( avoidIntersectionsReturn == 1 )
{
//not a polygon type. Impossible to get there
}
#if 0
else if ( avoidIntersectionsReturn == 2 ) //MH120131: disable this error message until there is a better way to cope with the single type / multi type problem
{
//bail out...
QMessageBox::critical( 0, tr( "Error" ), tr( "The feature could not be added because removing the polygon intersections would change the geometry type" ) );
delete f;
stopCapturing();
return;
}
#endif
else if ( avoidIntersectionsReturn == 3 )
{
QMessageBox::critical( 0, tr( "Error" ), tr( "An error was reported during intersection removal" ) );
}
}
vlayer->beginEditCommand( tr( "Feature added" ) );
if ( addFeature( vlayer, f ) )
{
//add points to other features to keep topology up-to-date
int topologicalEditing = QgsProject::instance()->readNumEntry( "Digitizing", "/TopologicalEditing", 0 );
if ( topologicalEditing )
{
vlayer->addTopologicalPoints( f->geometry() );
}
vlayer->endEditCommand();
}
else
{
delete f;
vlayer->destroyEditCommand();
}
stopCapturing();
}
}
}
QgsPoint QgsMapTool::toLayerCoordinates( QgsMapLayer* layer, const QPoint& point )
{
QgsPoint pt = toMapCoordinates( point );
return toLayerCoordinates( layer, pt );
}
QgsGeometry* QgsMapToolDeletePart::partUnderPoint( QPoint point, QgsFeatureId& fid, int& partNum )
{
QgsFeature f;
QgsGeometry* geomPart = new QgsGeometry();
switch ( vlayer->geometryType() )
{
case QGis::Point:
case QGis::Line:
{
QgsPointLocator::Match match = mCanvas->snappingUtils()->snapToCurrentLayer( point, QgsPointLocator::Vertex | QgsPointLocator::Edge );
if ( !match.isValid() )
return geomPart;
int snapVertex = match.vertexIndex();
vlayer->getFeatures( QgsFeatureRequest().setFilterFid( match.featureId() ) ).nextFeature( f );
const QgsGeometry* g = f.constGeometry();
if ( !g->isMultipart() )
{
fid = match.featureId();
delete geomPart;
return QgsGeometry::fromPoint( match.point() );
}
if ( g->wkbType() == QGis::WKBMultiPoint || g->wkbType() == QGis::WKBMultiPoint25D )
{
fid = match.featureId();
partNum = snapVertex;
delete geomPart;
return QgsGeometry::fromPoint( match.point() );
}
if ( g->wkbType() == QGis::WKBMultiLineString || g->wkbType() == QGis::WKBMultiLineString25D )
{
QgsMultiPolyline mline = g->asMultiPolyline();
for ( int part = 0; part < mline.count(); part++ )
{
if ( snapVertex < mline[part].count() )
{
fid = match.featureId();
partNum = part;
delete geomPart;
return QgsGeometry::fromPolyline( mline[part] );
}
snapVertex -= mline[part].count();
}
}
break;
}
case QGis::Polygon:
{
QgsPoint layerCoords = toLayerCoordinates( vlayer, point );
double searchRadius = QgsTolerance::vertexSearchRadius( mCanvas->currentLayer(), mCanvas->mapSettings() );
QgsRectangle selectRect( layerCoords.x() - searchRadius, layerCoords.y() - searchRadius,
layerCoords.x() + searchRadius, layerCoords.y() + searchRadius );
QgsFeatureIterator fit = vlayer->getFeatures( QgsFeatureRequest().setFilterRect( selectRect ) );
fit.nextFeature( f );
const QgsGeometry* g = f.constGeometry();
if ( !g )
return geomPart;
if ( !g->isMultipart() )
{
fid = f.id();
return geomPart;
}
QgsMultiPolygon mpolygon = g->asMultiPolygon();
for ( int part = 0; part < mpolygon.count(); part++ ) // go through the polygons
{
const QgsPolygon& polygon = mpolygon[part];
QgsGeometry* partGeo = QgsGeometry::fromPolygon( polygon );
if ( partGeo->contains( &layerCoords ) )
{
fid = f.id();
partNum = part;
delete geomPart;
return partGeo;
}
delete partGeo;
}
break;
}
default:
{
break;
}
}
return geomPart;
}
bool QgsMapToolIdentify::identifyVectorLayer( QList<IdentifyResult> *results, QgsVectorLayer *layer, const QgsPoint& point )
{
if ( !layer || !layer->hasGeometryType() )
return false;
if ( layer->hasScaleBasedVisibility() &&
( layer->minimumScale() > mCanvas->mapSettings().scale() ||
layer->maximumScale() <= mCanvas->mapSettings().scale() ) )
{
QgsDebugMsg( "Out of scale limits" );
return false;
}
QApplication::setOverrideCursor( Qt::WaitCursor );
QMap< QString, QString > commonDerivedAttributes;
commonDerivedAttributes.insert( tr( "(clicked coordinate)" ), point.toString() );
int featureCount = 0;
QgsFeatureList featureList;
// toLayerCoordinates will throw an exception for an 'invalid' point.
// For example, if you project a world map onto a globe using EPSG 2163
// and then click somewhere off the globe, an exception will be thrown.
try
{
// create the search rectangle
double searchRadius = searchRadiusMU( mCanvas );
QgsRectangle r;
r.setXMinimum( point.x() - searchRadius );
r.setXMaximum( point.x() + searchRadius );
r.setYMinimum( point.y() - searchRadius );
r.setYMaximum( point.y() + searchRadius );
r = toLayerCoordinates( layer, r );
QgsFeatureIterator fit = layer->getFeatures( QgsFeatureRequest().setFilterRect( r ).setFlags( QgsFeatureRequest::ExactIntersect ) );
QgsFeature f;
while ( fit.nextFeature( f ) )
featureList << QgsFeature( f );
}
catch ( QgsCsException & cse )
{
Q_UNUSED( cse );
// catch exception for 'invalid' point and proceed with no features found
QgsDebugMsg( QString( "Caught CRS exception %1" ).arg( cse.what() ) );
}
QgsFeatureList::iterator f_it = featureList.begin();
bool filter = false;
QgsRenderContext context( QgsRenderContext::fromMapSettings( mCanvas->mapSettings() ) );
context.expressionContext() << QgsExpressionContextUtils::layerScope( layer );
QgsFeatureRendererV2* renderer = layer->rendererV2();
if ( renderer && renderer->capabilities() & QgsFeatureRendererV2::ScaleDependent )
{
// setup scale for scale dependent visibility (rule based)
renderer->startRender( context, layer->fields() );
filter = renderer->capabilities() & QgsFeatureRendererV2::Filter;
}
for ( ; f_it != featureList.end(); ++f_it )
{
QMap< QString, QString > derivedAttributes = commonDerivedAttributes;
QgsFeatureId fid = f_it->id();
context.expressionContext().setFeature( *f_it );
if ( filter && !renderer->willRenderFeature( *f_it, context ) )
continue;
featureCount++;
derivedAttributes.unite( featureDerivedAttributes( &( *f_it ), layer, toLayerCoordinates( layer, point ) ) );
derivedAttributes.insert( tr( "feature id" ), fid < 0 ? tr( "new feature" ) : FID_TO_STRING( fid ) );
results->append( IdentifyResult( qobject_cast<QgsMapLayer *>( layer ), *f_it, derivedAttributes ) );
}
if ( renderer && renderer->capabilities() & QgsFeatureRendererV2::ScaleDependent )
{
renderer->stopRender( context );
}
QgsDebugMsg( "Feature count on identify: " + QString::number( featureCount ) );
QApplication::restoreOverrideCursor();
return featureCount > 0;
}
void QgsMapToolSelectUtils::setSelectFeatures( QgsMapCanvas* canvas,
QgsGeometry* selectGeometry,
bool doContains,
bool doDifference,
bool singleSelect )
{
if ( selectGeometry->type() != QGis::Polygon )
{
return;
}
QgsVectorLayer* vlayer = QgsMapToolSelectUtils::getCurrentVectorLayer( canvas );
if ( vlayer == nullptr )
{
return;
}
// toLayerCoordinates will throw an exception for any 'invalid' points in
// the rubber band.
// For example, if you project a world map onto a globe using EPSG 2163
// and then click somewhere off the globe, an exception will be thrown.
//QgsGeometry selectGeomTrans( *selectGeometry );
//if ( canvas->mapSettings().hasCrsTransformEnabled() )
//{
// try
// {
// QgsCoordinateTransform ct( canvas->mapSettings().destinationCrs(), vlayer->crs() );
// selectGeomTrans.transform( ct );
// }
// catch ( QgsCsException &cse )
// {
// Q_UNUSED( cse );
// // catch exception for 'invalid' point and leave existing selection unchanged
// QgsLogger::warning( "Caught CRS exception " + QString( __FILE__ ) + ": " + QString::number( __LINE__ ) );
// LOG_INFO( "CRS Exception\nSelection extends beyond layer's coordinate system" );
// return;
// }
//}
QgsGeometry selectGeomTrans;
try{
selectGeomTrans = toLayerCoordinates( canvas, selectGeometry, vlayer );
}
catch ( QgsCsException & )
{
return;
}
QApplication::setOverrideCursor( Qt::WaitCursor );
QgsDebugMsg( "Selection layer: " + vlayer->name() );
QgsDebugMsg( "Selection polygon: " + selectGeomTrans.exportToWkt() );
QgsDebugMsg( "doContains: " + QString( doContains ? "T" : "F" ) );
QgsDebugMsg( "doDifference: " + QString( doDifference ? "T" : "F" ) );
QgsRenderContext context = QgsRenderContext::fromMapSettings( canvas->mapSettings() );
QgsFeatureRendererV2* r = vlayer->rendererV2();
if ( r )
r->startRender( context, vlayer->pendingFields() );
QgsFeatureRequest request;
request.setFilterRect( selectGeomTrans.boundingBox() );
request.setFlags( QgsFeatureRequest::ExactIntersect );
if ( r )
request.setSubsetOfAttributes( r->usedAttributes(), vlayer->pendingFields() );
else
request.setSubsetOfAttributes( QgsAttributeList() );
QgsFeatureIterator fit = vlayer->getFeatures( request );
QgsFeatureIds newSelectedFeatures;
QgsFeature f;
QgsFeatureId closestFeatureId = 0;
bool foundSingleFeature = false;
double closestFeatureDist = std::numeric_limits<double>::max();
while ( fit.nextFeature( f ) )
{
#if (VERSION_INT >= 21601)
context.expressionContext().setFeature( f ); //taken from QGIS 2.16.1
// make sure to only use features that are visible
if ( r && !r->willRenderFeature( f, context ) )
#else
if ( r && !r->willRenderFeature( f ) )
#endif
continue;
QgsGeometry* g = f.geometry();
if ( doContains )
{
if ( !selectGeomTrans.contains( g ) )
continue;
}
else
{
if ( !selectGeomTrans.intersects( g ) )
continue;
}
if ( singleSelect )
{
foundSingleFeature = true;
double distance = g->distance( selectGeomTrans );
if ( distance <= closestFeatureDist )
{
closestFeatureDist = distance;
closestFeatureId = f.id();
}
}
else
{
newSelectedFeatures.insert( f.id() );
}
}
if ( singleSelect && foundSingleFeature )
{
newSelectedFeatures.insert( closestFeatureId );
}
if ( r )
r->stopRender( context );
QgsDebugMsg( "Number of new selected features: " + QString::number( newSelectedFeatures.size() ) );
if ( doDifference )
{
QgsFeatureIds layerSelectedFeatures = vlayer->selectedFeaturesIds();
QgsFeatureIds selectedFeatures;
QgsFeatureIds deselectedFeatures;
QgsFeatureIds::const_iterator i = newSelectedFeatures.constEnd();
while ( i != newSelectedFeatures.constBegin() )
{
--i;
if ( layerSelectedFeatures.contains( *i ) )
{
deselectedFeatures.insert( *i );
}
else
{
selectedFeatures.insert( *i );
}
}
vlayer->modifySelection( selectedFeatures, deselectedFeatures );
}
else
{
SelectFeatures( vlayer, newSelectedFeatures ); // vlayer->setSelectedFeatures( newSelectedFeatures );
}
QApplication::restoreOverrideCursor();
}
bool QgsMapToolFeatureAction::doAction( QgsVectorLayer *layer, int x, int y )
{
if ( !layer )
return false;
QgsPointXY point = mCanvas->getCoordinateTransform()->toMapCoordinates( x, y );
QgsRectangle r;
// create the search rectangle
double searchRadius = searchRadiusMU( mCanvas );
r.setXMinimum( point.x() - searchRadius );
r.setXMaximum( point.x() + searchRadius );
r.setYMinimum( point.y() - searchRadius );
r.setYMaximum( point.y() + searchRadius );
// toLayerCoordinates will throw an exception for an 'invalid' point.
// For example, if you project a world map onto a globe using EPSG 2163
// and then click somewhere off the globe, an exception will be thrown.
try
{
r = toLayerCoordinates( layer, r );
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse );
// catch exception for 'invalid' point and proceed with no features found
QgsDebugMsg( QString( "Caught CRS exception %1" ).arg( cse.what() ) );
}
QgsAction defaultAction = layer->actions()->defaultAction( QStringLiteral( "Canvas" ) );
QgsFeatureIterator fit = layer->getFeatures( QgsFeatureRequest().setFilterRect( r ).setFlags( QgsFeatureRequest::ExactIntersect ) );
QgsFeature feat;
while ( fit.nextFeature( feat ) )
{
if ( defaultAction.isValid() )
{
// define custom substitutions: layer id and clicked coords
QgsExpressionContext context;
context << QgsExpressionContextUtils::globalScope()
<< QgsExpressionContextUtils::projectScope( QgsProject::instance() )
<< QgsExpressionContextUtils::mapSettingsScope( mCanvas->mapSettings() );
QgsExpressionContextScope *actionScope = new QgsExpressionContextScope();
actionScope->addVariable( QgsExpressionContextScope::StaticVariable( QStringLiteral( "click_x" ), point.x(), true ) );
actionScope->addVariable( QgsExpressionContextScope::StaticVariable( QStringLiteral( "click_y" ), point.y(), true ) );
actionScope->addVariable( QgsExpressionContextScope::StaticVariable( QStringLiteral( "action_scope" ), QStringLiteral( "Canvas" ), true ) );
context << actionScope;
defaultAction.run( layer, feat, context );
}
else
{
QgsMapLayerAction *mapLayerAction = QgsGui::mapLayerActionRegistry()->defaultActionForLayer( layer );
if ( mapLayerAction )
{
mapLayerAction->triggerForFeature( layer, &feat );
}
}
}
return true;
}
void QgsMapToolAddFeature::cadCanvasReleaseEvent( QgsMapMouseEvent* e )
{
QgsVectorLayer* vlayer = currentVectorLayer();
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
QGis::WkbType layerWKBType = vlayer->wkbType();
QgsVectorDataProvider* provider = vlayer->dataProvider();
if ( !( provider->capabilities() & QgsVectorDataProvider::AddFeatures ) )
{
emit messageEmitted( tr( "The data provider for this layer does not support the addition of features." ), QgsMessageBar::WARNING );
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
// POINT CAPTURING
if ( mode() == CapturePoint )
{
if ( e->button() != Qt::LeftButton )
return;
//check we only use this tool for point/multipoint layers
if ( vlayer->geometryType() != QGis::Point && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture point' tool on this vector layer" ), QgsMessageBar::WARNING );
return;
}
QgsPoint savePoint; //point in layer coordinates
try
{
savePoint = toLayerCoordinates( vlayer, e->mapPoint() );
QgsDebugMsg( "savePoint = " + savePoint.toString() );
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse );
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), QgsMessageBar::WARNING );
return;
}
//only do the rest for provider with feature addition support
//note that for the grass provider, this will return false since
//grass provider has its own mechanism of feature addition
if ( provider->capabilities() & QgsVectorDataProvider::AddFeatures )
{
QgsFeature f( vlayer->fields(), 0 );
QgsGeometry *g = 0;
if ( layerWKBType == QGis::WKBPoint || layerWKBType == QGis::WKBPoint25D )
{
g = QgsGeometry::fromPoint( savePoint );
}
else if ( layerWKBType == QGis::WKBMultiPoint || layerWKBType == QGis::WKBMultiPoint25D )
{
g = QgsGeometry::fromMultiPoint( QgsMultiPoint() << savePoint );
}
else
{
// if layer supports more types (mCheckGeometryType is false)
g = QgsGeometry::fromPoint( savePoint );
}
f.setGeometry( g );
f.setValid( true );
addFeature( vlayer, &f, false );
mCanvas->refresh();
}
}
// LINE AND POLYGON CAPTURING
else if ( mode() == CaptureLine || mode() == CapturePolygon )
{
//check we only use the line tool for line/multiline layers
if ( mode() == CaptureLine && vlayer->geometryType() != QGis::Line && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture line' tool on this vector layer" ), QgsMessageBar::WARNING );
return;
}
//check we only use the polygon tool for polygon/multipolygon layers
if ( mode() == CapturePolygon && vlayer->geometryType() != QGis::Polygon && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture polygon' tool on this vector layer" ), QgsMessageBar::WARNING );
return;
}
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->mapPoint() );
if ( error == 1 )
{
//current layer is not a vector layer
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), QgsMessageBar::WARNING );
return;
}
startCapturing();
}
else if ( e->button() == Qt::RightButton )
{
// End of string
deleteTempRubberBand();
//lines: bail out if there are not at least two vertices
if ( mode() == CaptureLine && size() < 2 )
{
stopCapturing();
return;
}
//polygons: bail out if there are not at least two vertices
if ( mode() == CapturePolygon && size() < 3 )
{
stopCapturing();
return;
}
if ( mode() == CapturePolygon )
{
closePolygon();
}
//create QgsFeature with wkb representation
QScopedPointer< QgsFeature > f( new QgsFeature( vlayer->fields(), 0 ) );
//does compoundcurve contain circular strings?
//does provider support circular strings?
bool hasCurvedSegments = captureCurve()->hasCurvedSegments();
bool providerSupportsCurvedSegments = vlayer->dataProvider()->capabilities() & QgsVectorDataProvider::CircularGeometries;
QgsCurveV2* curveToAdd = 0;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
curveToAdd = captureCurve()->clone();
}
else
{
curveToAdd = captureCurve()->curveToLine();
}
if ( mode() == CaptureLine )
{
f->setGeometry( new QgsGeometry( curveToAdd ) );
}
else
{
QgsCurvePolygonV2* poly = 0;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
poly = new QgsCurvePolygonV2();
}
else
{
poly = new QgsPolygonV2();
}
poly->setExteriorRing( curveToAdd );
f->setGeometry( new QgsGeometry( poly ) );
int avoidIntersectionsReturn = f->geometry()->avoidIntersections();
if ( avoidIntersectionsReturn == 1 )
{
//not a polygon type. Impossible to get there
}
#if 0
else if ( avoidIntersectionsReturn == 2 ) //MH120131: disable this error message until there is a better way to cope with the single type / multi type problem
{
//bail out...
emit messageEmitted( tr( "The feature could not be added because removing the polygon intersections would change the geometry type" ), QgsMessageBar::CRITICAL );
stopCapturing();
return;
}
#endif
else if ( avoidIntersectionsReturn == 3 )
{
emit messageEmitted( tr( "An error was reported during intersection removal" ), QgsMessageBar::CRITICAL );
}
if ( !f->constGeometry()->asWkb() ) //avoid intersection might have removed the whole geometry
{
QString reason;
if ( avoidIntersectionsReturn != 2 )
{
reason = tr( "The feature cannot be added because it's geometry is empty" );
}
else
{
reason = tr( "The feature cannot be added because it's geometry collapsed due to intersection avoidance" );
}
emit messageEmitted( reason, QgsMessageBar::CRITICAL );
stopCapturing();
return;
}
}
if ( addFeature( vlayer, f.data(), false ) )
{
//add points to other features to keep topology up-to-date
int topologicalEditing = QgsProject::instance()->readNumEntry( "Digitizing", "/TopologicalEditing", 0 );
//use always topological editing for avoidIntersection.
//Otherwise, no way to guarantee the geometries don't have a small gap in between.
QStringList intersectionLayers = QgsProject::instance()->readListEntry( "Digitizing", "/AvoidIntersectionsList" );
bool avoidIntersection = !intersectionLayers.isEmpty();
if ( avoidIntersection ) //try to add topological points also to background layers
{
QStringList::const_iterator lIt = intersectionLayers.constBegin();
for ( ; lIt != intersectionLayers.constEnd(); ++lIt )
{
QgsMapLayer* ml = QgsMapLayerRegistry::instance()->mapLayer( *lIt );
QgsVectorLayer* vl = qobject_cast<QgsVectorLayer*>( ml );
//can only add topological points if background layer is editable...
if ( vl && vl->geometryType() == QGis::Polygon && vl->isEditable() )
{
vl->addTopologicalPoints( f->constGeometry() );
}
}
}
else if ( topologicalEditing )
{
vlayer->addTopologicalPoints( f->constGeometry() );
}
}
stopCapturing();
}
}
}
bool QgsMapToolIdentify::identifyRasterLayer( QList<IdentifyResult> *results, QgsRasterLayer *layer, QgsPoint point, const QgsRectangle& viewExtent, double mapUnitsPerPixel )
{
QgsDebugMsg( "point = " + point.toString() );
if ( !layer )
return false;
QgsRasterDataProvider *dprovider = layer->dataProvider();
if ( !dprovider )
return false;
int capabilities = dprovider->capabilities();
if ( !( capabilities & QgsRasterDataProvider::Identify ) )
return false;
QgsPoint pointInCanvasCrs = point;
try
{
point = toLayerCoordinates( layer, point );
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse );
QgsDebugMsg( QString( "coordinate not reprojectable: %1" ).arg( cse.what() ) );
return false;
}
QgsDebugMsg( QString( "point = %1 %2" ).arg( point.x() ).arg( point.y() ) );
if ( !layer->extent().contains( point ) )
return false;
QMap< QString, QString > attributes, derivedAttributes;
QgsRaster::IdentifyFormat format = QgsRasterDataProvider::identifyFormatFromName( layer->customProperty( "identify/format" ).toString() );
// check if the format is really supported otherwise use first supported format
if ( !( QgsRasterDataProvider::identifyFormatToCapability( format ) & capabilities ) )
{
if ( capabilities & QgsRasterInterface::IdentifyFeature ) format = QgsRaster::IdentifyFormatFeature;
else if ( capabilities & QgsRasterInterface::IdentifyValue ) format = QgsRaster::IdentifyFormatValue;
else if ( capabilities & QgsRasterInterface::IdentifyHtml ) format = QgsRaster::IdentifyFormatHtml;
else if ( capabilities & QgsRasterInterface::IdentifyText ) format = QgsRaster::IdentifyFormatText;
else return false;
}
QgsRasterIdentifyResult identifyResult;
// We can only use current map canvas context (extent, width, height) if layer is not reprojected,
if ( mCanvas->hasCrsTransformEnabled() && dprovider->crs() != mCanvas->mapSettings().destinationCrs() )
{
// To get some reasonable response for point/line WMS vector layers we must
// use a context with approximately a resolution in layer CRS units
// corresponding to current map canvas resolution (for examplei UMN Mapserver
// in msWMSFeatureInfo() -> msQueryByRect() is using requested pixel
// + TOLERANCE (layer param) for feature selection)
//
QgsRectangle r;
r.setXMinimum( pointInCanvasCrs.x() - mapUnitsPerPixel / 2. );
r.setXMaximum( pointInCanvasCrs.x() + mapUnitsPerPixel / 2. );
r.setYMinimum( pointInCanvasCrs.y() - mapUnitsPerPixel / 2. );
r.setYMaximum( pointInCanvasCrs.y() + mapUnitsPerPixel / 2. );
r = toLayerCoordinates( layer, r ); // will be a bit larger
// Mapserver (6.0.3, for example) does not work with 1x1 pixel box
// but that is fixed (the rect is enlarged) in the WMS provider
identifyResult = dprovider->identify( point, format, r, 1, 1 );
}
else
{
// It would be nice to use the same extent and size which was used for drawing,
// so that WCS can use cache from last draw, unfortunately QgsRasterLayer::draw()
// is doing some tricks with extent and size to allign raster to output which
// would be difficult to replicate here.
// Note: cutting the extent may result in slightly different x and y resolutions
// and thus shifted point calculated back in QGIS WMS (using average resolution)
//viewExtent = dprovider->extent().intersect( &viewExtent );
// Width and height are calculated from not projected extent and we hope that
// are similar to source width and height used to reproject layer for drawing.
// TODO: may be very dangerous, because it may result in different resolutions
// in source CRS, and WMS server (QGIS server) calcs wrong coor using average resolution.
int width = qRound( viewExtent.width() / mapUnitsPerPixel );
int height = qRound( viewExtent.height() / mapUnitsPerPixel );
QgsDebugMsg( QString( "viewExtent.width = %1 viewExtent.height = %2" ).arg( viewExtent.width() ).arg( viewExtent.height() ) );
QgsDebugMsg( QString( "width = %1 height = %2" ).arg( width ).arg( height ) );
QgsDebugMsg( QString( "xRes = %1 yRes = %2 mapUnitsPerPixel = %3" ).arg( viewExtent.width() / width ).arg( viewExtent.height() / height ).arg( mapUnitsPerPixel ) );
identifyResult = dprovider->identify( point, format, viewExtent, width, height );
}
derivedAttributes.insert( tr( "(clicked coordinate)" ), point.toString() );
if ( identifyResult.isValid() )
{
QMap<int, QVariant> values = identifyResult.results();
QgsGeometry geometry;
if ( format == QgsRaster::IdentifyFormatValue )
{
Q_FOREACH ( int bandNo, values.keys() )
{
QString valueString;
if ( values.value( bandNo ).isNull() )
{
valueString = tr( "no data" );
}
else
{
double value = values.value( bandNo ).toDouble();
valueString = QgsRasterBlock::printValue( value );
}
attributes.insert( dprovider->generateBandName( bandNo ), valueString );
}
QString label = layer->name();
results->append( IdentifyResult( qobject_cast<QgsMapLayer *>( layer ), label, attributes, derivedAttributes ) );
}
void QgsMapToolRotateFeature::canvasReleaseEvent( QgsMapMouseEvent *e )
{
if ( !mCanvas )
{
return;
}
QgsVectorLayer *vlayer = currentVectorLayer();
if ( !vlayer )
{
deleteRotationWidget();
deleteRubberband();
notifyNotVectorLayer();
return;
}
if ( e->button() == Qt::RightButton )
{
cancel();
return;
}
// place anchor point on CTRL + click
if ( e->modifiers() & Qt::ControlModifier )
{
if ( !mAnchorPoint )
{
return;
}
mAnchorPoint->setCenter( toMapCoordinates( e->pos() ) );
mStartPointMapCoords = toMapCoordinates( e->pos() );
mStPoint = e->pos();
return;
}
deleteRotationWidget();
// Initialize rotation if not yet active
if ( !mRotationActive )
{
mRotation = 0;
mRotationOffset = 0;
deleteRubberband();
mInitialPos = e->pos();
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
QgsPointXY layerCoords = toLayerCoordinates( vlayer, e->pos() );
double searchRadius = QgsTolerance::vertexSearchRadius( mCanvas->currentLayer(), mCanvas->mapSettings() );
QgsRectangle selectRect( layerCoords.x() - searchRadius, layerCoords.y() - searchRadius,
layerCoords.x() + searchRadius, layerCoords.y() + searchRadius );
if ( vlayer->selectedFeatureCount() == 0 )
{
QgsFeatureIterator fit = vlayer->getFeatures( QgsFeatureRequest().setFilterRect( selectRect ).setNoAttributes() );
//find the closest feature
QgsGeometry pointGeometry = QgsGeometry::fromPointXY( layerCoords );
if ( pointGeometry.isNull() )
{
return;
}
double minDistance = std::numeric_limits<double>::max();
QgsFeature cf;
QgsFeature f;
while ( fit.nextFeature( f ) )
{
if ( f.hasGeometry() )
{
double currentDistance = pointGeometry.distance( f.geometry() );
if ( currentDistance < minDistance )
{
minDistance = currentDistance;
cf = f;
}
}
}
if ( minDistance == std::numeric_limits<double>::max() )
{
emit messageEmitted( tr( "Could not find a nearby feature in the current layer." ) );
return;
}
QgsRectangle bound = cf.geometry().boundingBox();
mStartPointMapCoords = toMapCoordinates( vlayer, bound.center() );
if ( !mAnchorPoint )
{
mAnchorPoint = qgis::make_unique<QgsVertexMarker>( mCanvas );
}
mAnchorPoint->setIconType( QgsVertexMarker::ICON_CROSS );
mAnchorPoint->setCenter( mStartPointMapCoords );
mStPoint = toCanvasCoordinates( mStartPointMapCoords );
mRotatedFeatures.clear();
mRotatedFeatures << cf.id(); //todo: take the closest feature, not the first one...
mRubberBand = createRubberBand( vlayer->geometryType() );
mRubberBand->setToGeometry( cf.geometry(), vlayer );
}
else
{
mRotatedFeatures = vlayer->selectedFeatureIds();
mRubberBand = createRubberBand( vlayer->geometryType() );
QgsFeature feat;
QgsFeatureIterator it = vlayer->getSelectedFeatures();
while ( it.nextFeature( feat ) )
{
mRubberBand->addGeometry( feat.geometry(), vlayer );
}
}
mRubberBand->show();
double XDistance = mInitialPos.x() - mAnchorPoint->x();
double YDistance = mInitialPos.y() - mAnchorPoint->y();
mRotationOffset = std::atan2( YDistance, XDistance ) * ( 180 / M_PI );
createRotationWidget();
if ( e->modifiers() & Qt::ShiftModifier )
{
if ( mRotationWidget )
{
mRotationWidget->setMagnet( 45 );
}
}
mRotationActive = true;
return;
}
applyRotation( mRotation );
}