int handleBatCmd(char* line, int cmdId) {
int result = -1;
int param = -1;
char response[MAX_AT_RESPONSE];
LOGATCI(LOG_DEBUG, "line: %s", line);
switch(cmdId) {
case 0:
result = AT_get_charging_state_flag();
break;
case 1:
result = AT_get_bat_voltage();
break;
case 2:
result = AT_set_Charger_Current(CUT_CHARGER_CURRENT);
break;
default:
LOGATCI(LOG_DEBUG, "atcid not support this at command: %s", line);
}
if(result != -1) {
sprintf(response, "%d\r\nOK\r\n\0", result);
writeDataToSerial(response, strlen(response));
}
else {
sprintf(response, "ERROR\r\n\0");
writeDataToSerial(response, strlen(response));
}
return result;
}
// Writes image data to a file on the non-temporary storage (ie. HDD or flash
// memory) of the device running this sofware.
void* writeImageContentToFile(void* args)
{
struct threadArgs* inputs = (struct threadArgs*)args;
int nodeCtr = 0;
struct lstnode* node = inputs->cNode;
pthread_mutex_t* mutex = inputs->mutex;
free(args);
int fd = openPort(); // open the serial port
while(TRUE)
{
byte* buf = (byte*)malloc(6); // allocate buffer for meta data
if(read(fd, buf, 6) == 6) // read meta data
{
pthread_mutex_lock(mutex); // lock so other thread can't change ptrs
printf("Received: %s\n", buf);
struct telpkt* tp = decode(buf, 5); // create telemetry pkt
if(node->size > 0) node = writeDataToSerial(tp, fd, node, nodeCtr);
free(tp);
pthread_mutex_unlock(mutex);
}
free(buf);
}
free(inputs);
pthread_exit(NULL);
}
int custom_command_hdlr(char* line){
int i = 0, ret = 0;
int table_size = 0;
char response[MAX_AT_RESPONSE];
char* line_cut = cut_cmd_line(line);
memset(response, 0, sizeof(response));
table_size = (sizeof(custom_cmd_table)/sizeof(customcmd_type));
for(i = 0; i < table_size;i++){
LOGATCI(LOG_DEBUG, "custom_cmd_table[%d].cmdName = %s", i, custom_cmd_table[i].cmdName);
if(strcmp(line_cut, custom_cmd_table[i].cmdName) == 0){
ATOP_t at_op = getAtOp(&line);
LOGATCI(LOG_DEBUG, "The command op is %d; Support op is %d", at_op, custom_cmd_table[i].opType);
if((at_op & custom_cmd_table[i].opType) == 0){
writeDataToserialByResponseType(AT_NOT_IMPL);
}else{
ret = custom_cmd_table[i].cmd_handle_func(line, at_op, response);
if(strlen(response) > 0){
writeDataToSerial(response, strlen(response));
}
if(ret != AT_NONE_OP){
writeDataToserialByResponseType(ret);
}
}
free(line_cut);
return 1; //The command is handled here
}
}
free(line_cut);
return 0;
}
int handleBspCmd(char* cmdData, int cmdId){
cmd_data_type cmd_data;
int fd = -1, result = -1;
ATOP_t at_op;
char response[MAX_AT_RESPONSE];
LOGATCI(LOG_DEBUG,"Enter with cmdId:%d", cmdId);
at_op = getAtOp(&cmdData);
LOGATCI(LOG_DEBUG, "The command op is %d; Support op is %d", at_op, bsp_cmd_table[cmdId].opType);
memset(response, 0, sizeof(response));
if((at_op & bsp_cmd_table[cmdId].opType) != 0){
//Open the FD to handle
LOGATCI(LOG_DEBUG, "Open FD: %s", bsp_cmd_table[cmdId].devPath);
fd = open(bsp_cmd_table[cmdId].devPath, O_RDWR);
if(fd < 0){
LOGATCI(LOG_ERR, "Fail to open FD with errno:%d", errno);
writeDataToserialByResponseType(AT_ERROR);
return 0;
}
//Initalize the cmd data structure
memset(cmd_data.cmdDataRequest, 0, sizeof(cmd_data.cmdDataRequest));
memset(cmd_data.cmdDataResponse, 0, sizeof(cmd_data.cmdDataResponse));
strcpy(cmd_data.cmdDataRequest, cmdData);
cmd_data.opType = at_op;
//Send IOControl to device driver
result = ioctl(fd, bsp_cmd_table[cmdId].cmdId, &cmd_data);
if(result < 0){
LOGATCI(LOG_ERR, "Fail to IO Control[%d] with errno:%d", bsp_cmd_table[cmdId].cmdId, errno);
writeDataToserialByResponseType(AT_ERROR);
return 0;
}
if(strlen(cmd_data.cmdDataResponse) > 0){
sprintf(response, "\r\n%s\r\n", cmd_data.cmdDataResponse);
writeDataToSerial(response, strlen(response));
}
}else{
writeDataToserialByResponseType(AT_NOT_IMPL);
}
return 0;
}
ATRESPONSE_t pas_esuo_handler(char* cmdline, ATOP_t opType, char* response){
int err = 0, cmdID = 0;
char simIDProperty[PROPERTY_VALUE_MAX];
int simID = 0;
LOGATCI(LOG_DEBUG, "pas_esuo_handler enter with opType: %d", opType);
switch(opType){
case AT_SET_OP:
err = at_tok_nextint(&cmdline, &cmdID);
if (err < 0) return -1;
if(cmdID == 4){ //Configure the default SIM to SIM1
property_set(ATCI_SIM, "0");
LOGATCI(LOG_DEBUG, "Set default to SIM1");
return AT_OK;
}else if(cmdID == 5){ //Configure the default SIM to SIM2
property_set(ATCI_SIM, "1");
LOGATCI(LOG_DEBUG, "Set default to SIM2");
return AT_OK;
}
break;
case AT_TEST_OP:
writeDataToSerial("+ESUO: (4-5)", strlen("+ESUO: (4-5)"));
return AT_OK;
break;
case AT_READ_OP:
property_get(ATCI_SIM, simIDProperty, "0");
simID = atoi(simIDProperty);
if(simID == 1){
strcpy(response, "+ESUO:5\r\n");
}else{
strcpy(response, "+ESUO:4\r\n");
}
return AT_OK;
break;
default:
break;
}
return AT_ERROR;
}