Exemplo n.º 1
0
void vApplicationTickHook( void )
{
static unsigned long ulCounter = 0;
static const unsigned long ulCheckFrequency = 5000UL / portTICK_RATE_MS;
long lHigherPriorityTaskWoken = pdFALSE;

/* Define the status message that is sent to the LCD task.  By default the
status is PASS. */
static xQueueMessage xStatusMessage = { mainMESSAGE_STATUS, pdPASS };

	/* This is called from within the tick interrupt and performs the 'check'
	functionality as described in the comments at the top of this file.

	Is it time to perform the 'check' functionality again? */
	ulCounter++;
	if( ulCounter >= ulCheckFrequency )
	{
		/* See if the standard demo tasks are executing as expected, changing
		the message that is sent to the LCD task from PASS to an error code if
		any tasks set reports an error. */
		if( xAreDynamicPriorityTasksStillRunning() != pdPASS )
		{
			xStatusMessage.lMessageValue = mainERROR_DYNAMIC_TASKS;
		}
		
		if( xAreComTestTasksStillRunning() != pdPASS )
		{
			xStatusMessage.lMessageValue = mainERROR_COM_TEST;
		}
		
		if( xAreGenericQueueTasksStillRunning() != pdPASS )
		{
			xStatusMessage.lMessageValue = mainERROR_GEN_QUEUE_TEST;
		}
		
		/* As this is the tick hook the lHigherPriorityTaskWoken parameter is not
		needed (a context switch is going to be performed anyway), but it must
		still be provided. */
		xQueueSendFromISR( xLCDQueue, &xStatusMessage, &lHigherPriorityTaskWoken );
		ulCounter = 0;
	}
}
Exemplo n.º 2
0
/*-----------------------------------------------------------*/
static portSHORT prvCheckOtherTasksAreStillRunning( void )
{
	static portSHORT	sNoErrorFound = pdTRUE;

	/* The demo tasks maintain a count that increments every cycle of the task
	provided that the task has never encountered an error.  This function 
	checks the counts maintained by the tasks to ensure they are still being
	incremented.  A count remaining at the same value between calls therefore
	indicates that an error has been detected.  Only tasks that do not flash
	an LED are checked. */
	#if ( INCLUDE_StartIntegerMathTasks == 1 )
	if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	#endif
	#if ( INCLUDE_AltStartComTestTasks == 1 )
	if( xAreComTestTasksStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	#endif
	#if ( INCLUDE_StartPolledQueueTasks == 1 )
	if( xArePollingQueuesStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	#endif
	#if ( INCLUDE_StartSemaphoreTasks == 1 )
	if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	#endif
	#if ( INCLUDE_StartBlockingQueueTasks == 1 )
	if( xAreBlockingQueuesStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	#endif
	#if ( INCLUDE_StartDynamicPriorityTasks == 1 )
	if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	#endif
	#if ( INCLUDE_StartMathTasks == 1 )
	if( xAreMathsTaskStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	#endif
	#if ( INCLUDE_StartFlashCoRoutines == 1 )
	if( xAreFlashCoRoutinesStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	#endif
	#if ( INCLUDE_StartHookCoRoutines == 1 )
	if( xAreHookCoRoutinesStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	#endif
	#if ( INCLUDE_StartGenericQueueTasks == 1 )
	if( xAreGenericQueueTasksStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	#endif
	#if ( INCLUDE_StartQueuePeekTasks == 1 )
	if( xAreQueuePeekTasksStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	#endif
	#if ( INCLUDE_CreateBlockTimeTasks == 1 )
	if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	#endif
	#if ( INCLUDE_CreateSuicidalTasks == 1 )
	if( xIsCreateTaskStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	#endif
	return sNoErrorFound;
}
static void prvCheckTimerCallback( TimerHandle_t xTimer )
{
static long lChangedTimerPeriodAlready = pdFALSE;
unsigned long ulErrorFound = pdFALSE;

	/* Check all the demo tasks (other than the flash tasks) to ensure
	they are all still running, and that none have detected an error. */
	if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if( xAreBlockingQueuesStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if ( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if ( xAreGenericQueueTasksStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if ( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if( xIsCreateTaskStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if( xArePollingQueuesStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	/* Toggle the check LED to give an indication of the system status.  If
	the LED toggles every mainCHECK_TIMER_PERIOD_MS milliseconds then
	everything is ok.  A faster toggle indicates an error. */
	vParTestToggleLED( mainCHECK_LED );

	/* Have any errors been latch in ulErrorFound?  If so, shorten the
	period of the check timer to mainERROR_CHECK_TIMER_PERIOD_MS milliseconds.
	This will result in an increase in the rate at which mainCHECK_LED
	toggles. */
	if( ulErrorFound != pdFALSE )
	{
		if( lChangedTimerPeriodAlready == pdFALSE )
		{
			lChangedTimerPeriodAlready = pdTRUE;

			/* This call to xTimerChangePeriod() uses a zero block time.
			Functions called from inside of a timer callback function must
			*never* attempt	to block. */
			xTimerChangePeriod( xTimer, ( mainERROR_CHECK_TIMER_PERIOD_MS ), mainDONT_BLOCK );
		}
	}
}
/* See the description at the top of this file. */
static void prvCheckTimerCallback( xTimerHandle xTimer )
{
static long lChangedTimerPeriodAlready = pdFALSE;
static unsigned long ulLastRegTest1Value = 0, ulLastRegTest2Value = 0;
unsigned long ulErrorFound = pdFALSE;

	/* Check all the demo and test tasks to ensure that they are all still
	running, and that none have detected an error. */
	if( xAreDynamicPriorityTasksStillRunning() != pdPASS )
	{
		ulErrorFound = pdTRUE;
	}

	if( xAreBlockTimeTestTasksStillRunning() != pdPASS )
	{
		ulErrorFound = pdTRUE;
	}

	if( xAreCountingSemaphoreTasksStillRunning() != pdPASS )
	{
		ulErrorFound = pdTRUE;
	}

	if( xAreRecursiveMutexTasksStillRunning() != pdPASS )
	{
		ulErrorFound = pdTRUE;
	}

	/* Check that the register test 1 task is still running. */
	if( ulLastRegTest1Value == ulRegTest1LoopCounter )
	{
		ulErrorFound = pdTRUE;
	}
	ulLastRegTest1Value = ulRegTest1LoopCounter;

	/* Check that the register test 2 task is still running. */
	if( ulLastRegTest2Value == ulRegTest2LoopCounter )
	{
		ulErrorFound = pdTRUE;
	}
	ulLastRegTest2Value = ulRegTest2LoopCounter;

	
	if( xAreQueueSetTasksStillRunning() != pdPASS )
	{
		ulErrorFound = pdTRUE;
	}

	if( xIsQueueOverwriteTaskStillRunning() != pdPASS )
	{
		ulErrorFound = pdTRUE;
	}
	
	if( xAreGenericQueueTasksStillRunning() != pdPASS )
	{
		ulErrorFound = pdTRUE;
	}
	
	if( xAreQueuePeekTasksStillRunning() != pdPASS )
	{
		ulErrorFound = pdTRUE;
	}

	/* Toggle the check LED to give an indication of the system status.  If
	the LED toggles every mainCHECK_TIMER_PERIOD_MS milliseconds then
	everything is ok.  A faster toggle indicates an error. */
	port_pin_toggle_output_level( LED_0_PIN );

	/* Have any errors been latched in ulErrorFound?  If so, shorten the
	period of the check timer to mainERROR_CHECK_TIMER_PERIOD_MS milliseconds.
	This will result in an increase in the rate at which the LED toggles. */
	if( ulErrorFound != pdFALSE )
	{
		if( lChangedTimerPeriodAlready == pdFALSE )
		{
			lChangedTimerPeriodAlready = pdTRUE;

			/* This call to xTimerChangePeriod() uses a zero block time.
			Functions called from inside of a timer callback function must
			*never* attempt	to block. */
			xTimerChangePeriod( xTimer, ( mainERROR_CHECK_TIMER_PERIOD_MS ), mainDONT_BLOCK );
		}
	}
}
Exemplo n.º 5
0
Arquivo: main.c Projeto: HclX/freertos
void vApplicationTickHook( void )
{
static xOLEDMessage xMessage = { "PASS" };
static unsigned long ulTicksSinceLastDisplay = 0;
portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;

	/* Called from every tick interrupt.  Have enough ticks passed to make it
	time to perform our health status check again? */
	ulTicksSinceLastDisplay++;
	if( ulTicksSinceLastDisplay >= mainCHECK_DELAY )
	{
		ulTicksSinceLastDisplay = 0;

		/* Has an error been found in any task? */
		if( xAreGenericQueueTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN GEN Q";
		}
	    else if( xIsCreateTaskStillRunning() != pdTRUE )
	    {
	        xMessage.pcMessage = "ERROR IN CREATE";
	    }
	    else if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
	    {
	        xMessage.pcMessage = "ERROR IN MATH";
	    }
		else if( xAreIntQueueTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN INT QUEUE";
		}
		else if( xAreBlockingQueuesStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN BLOCK Q";
		}
		else if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN BLOCK TIME";
		}
		else if( xAreSemaphoreTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN SEMAPHORE";
		}
		else if( xArePollingQueuesStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN POLL Q";
		}
		else if( xAreQueuePeekTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN PEEK Q";
		}
		else if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN REC MUTEX";
		}
		else if( xAreQueueSetTasksStillRunning() != pdPASS )
		{
			xMessage.pcMessage = "ERROR IN Q SET";
		}
		else if( xAreEventGroupTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN EVNT GRP";
		}

		configASSERT( strcmp( ( const char * ) xMessage.pcMessage, "PASS" ) == 0 );

		/* Send the message to the OLED gatekeeper for display. */
		xHigherPriorityTaskWoken = pdFALSE;
		xQueueSendFromISR( xOLEDQueue, &xMessage, &xHigherPriorityTaskWoken );
	}

	/* Write to a queue that is in use as part of the queue set demo to
	demonstrate using queue sets from an ISR. */
	vQueueSetAccessQueueSetFromISR();

	/* Call the event group ISR tests. */
	vPeriodicEventGroupsProcessing();
}
Exemplo n.º 6
0
static short prvCheckOtherTasksAreStillRunning( void )
{
	static short	sNoErrorFound = pdTRUE;

	/* The demo tasks maintain a count that increments every cycle of the task
	provided that the task has never encountered an error.  This function
	checks the counts maintained by the tasks to ensure they are still being
	incremented.  A count remaining at the same value between calls therefore
	indicates that an error has been detected.  Only tasks that do not flash
	an LED are checked. */
	if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	if( xArePollingQueuesStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	if( xAreBlockingQueuesStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	if( xAreFlashCoRoutinesStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	if( xAreGenericQueueTasksStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	if( xIsCreateTaskStillRunning() != pdTRUE )
	{
		sNoErrorFound = pdFALSE;
	}

	#if INCLUDE_TraceListTasks == 0
	{
		if( xAreComTestTasksStillRunning() != pdTRUE )
		{
			sNoErrorFound = pdFALSE;
		}
	}
	#endif

	return sNoErrorFound;
}
Exemplo n.º 7
0
Arquivo: main.c Projeto: HclX/freertos
static void prvCheckTask( void *pvParameter )
{
    TickType_t xNextWakeTime, xCycleFrequency = mainNO_ERROR_CYCLE_TIME;
    unsigned long ulLastRegTest1CycleCount = 0UL, ulLastRegTest2CycleCount = 0UL;

    /* Just to remove compiler warning. */
    ( void ) pvParameter;

    /* Initialise xNextWakeTime - this only needs to be done once. */
    xNextWakeTime = xTaskGetTickCount();

    for( ;; )
    {
        /* Place this task in the blocked state until it is time to run again. */
        vTaskDelayUntil( &xNextWakeTime, xCycleFrequency );

        /* Inspect all the other tasks to ensure none have experienced any errors. */
        if( xAreGenericQueueTasksStillRunning() != pdTRUE )
        {
            /* Increase the rate at which this task cycles, which will increase the
            rate at which mainCHECK_LED flashes to give visual feedback that an error
            has occurred. */
            xCycleFrequency = mainERROR_CYCLE_TIME;
            pcStatusMessage = "Error in GenQ test.";
        }
        else if( xAreQueuePeekTasksStillRunning() != pdTRUE )
        {
            xCycleFrequency = mainERROR_CYCLE_TIME;
            pcStatusMessage = "Error in Queue Peek test.";
        }
        else if( xAreBlockingQueuesStillRunning() != pdTRUE )
        {
            xCycleFrequency = mainERROR_CYCLE_TIME;
            pcStatusMessage = "Error in Blocking Queue test.";
        }
        else if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
        {
            xCycleFrequency = mainERROR_CYCLE_TIME;
            pcStatusMessage = "Error in BlockTim test.";
        }
        else if( xAreSemaphoreTasksStillRunning() != pdTRUE )
        {
            xCycleFrequency = mainERROR_CYCLE_TIME;
            pcStatusMessage = "Error in Semaphore test.";
        }
        else if( xArePollingQueuesStillRunning() != pdTRUE )
        {
            xCycleFrequency = mainERROR_CYCLE_TIME;
            pcStatusMessage = "Error in Polling Queue test.";
        }
        else if( xIsCreateTaskStillRunning() != pdTRUE )
        {
            xCycleFrequency = mainERROR_CYCLE_TIME;
            pcStatusMessage = "Error in Create test.";
        }
        else if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
        {
            xCycleFrequency = mainERROR_CYCLE_TIME;
            pcStatusMessage = "Error in integer Math test.";
        }
        else if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
        {
            xCycleFrequency = mainERROR_CYCLE_TIME;
            pcStatusMessage = "Error in recursive mutex test.";
        }
        else if( xAreMathsTaskStillRunning() != pdTRUE )
        {
            xCycleFrequency = mainERROR_CYCLE_TIME;
            pcStatusMessage = "Error in floating point Math test.";
        }

        /* Check the reg test tasks are still cycling.  They will stop incrementing
        their loop counters if they encounter an error. */
        if( ulRegTest1CycleCount == ulLastRegTest1CycleCount )
        {
            xCycleFrequency = mainERROR_CYCLE_TIME;
            pcStatusMessage = "Error in RegTest.";
        }

        if( ulRegTest2CycleCount == ulLastRegTest2CycleCount )
        {
            xCycleFrequency = mainERROR_CYCLE_TIME;
            pcStatusMessage = "Error in RegTest.";
        }

        ulLastRegTest1CycleCount = ulRegTest1CycleCount;
        ulLastRegTest2CycleCount = ulRegTest2CycleCount;

        /* Toggle the check LED to give an indication of the system status.  If the
        LED toggles every 5 seconds then everything is ok.  A faster toggle indicates
        an error. */
        vParTestToggleLED( mainCHECK_LED );
    }
}
Exemplo n.º 8
0
static void prvCheckTask( void *pvParameters )
{
unsigned ulLastRegTest1Count = 0, ulLastRegTest2Count = 0;
portTickType xLastExecutionTime;

	/* To prevent compiler warnings. */
	( void ) pvParameters;

	/* Initialise the variable used to control our iteration rate prior to
	its first use. */
	xLastExecutionTime = xTaskGetTickCount();

	for( ;; )
	{
		/* Wait until it is time to run the tests again. */
		vTaskDelayUntil( &xLastExecutionTime, mainCHECK_TASK_PERIOD );

		/* Has an error been found in any task? */
		if( xAreGenericQueueTasksStillRunning() != pdTRUE )
		{
			ulErrorCode |= 0x01UL;
		}

		if( xAreQueuePeekTasksStillRunning() != pdTRUE )
		{
			ulErrorCode |= 0x02UL;
		}

		if( xAreBlockingQueuesStillRunning() != pdTRUE )
		{
			ulErrorCode |= 0x04UL;
		}

		if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	    {
	    	ulErrorCode |= 0x20UL;
	    }

		if( xArePollingQueuesStillRunning() != pdTRUE )
	    {
	    	ulErrorCode |= 0x40UL;
	    }

		if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
		{
			ulErrorCode |= 0x80UL;
		}

	    if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
	    {
	    	ulErrorCode |= 0x100UL;
	    }

		if( ulLastRegTest1Count == ulRegTest1Counter )
		{
			ulErrorCode |= 0x200UL;
		}

		if( ulLastRegTest2Count == ulRegTest2Counter )
		{
			ulErrorCode |= 0x200UL;
		}

		/* Remember the reg test counts so a stall in their values can be
		detected next time around. */
		ulLastRegTest1Count = ulRegTest1Counter;
		ulLastRegTest2Count = ulRegTest2Counter;
	}
}
Exemplo n.º 9
0
static void vErrorChecks( void *pvParameters )
{
portTickType xToggleRate = mainNO_ERROR_TOGGLE_PERIOD, xLastWakeTime;

	/* Ensure the parameter was passed in as expected.  This is just a test of
	the kernel port, the parameter is not actually used for anything.  The
	pointer will only actually be either 3 or 2 bytes, depending on the memory
	model. */
	if( pvParameters != ( void * ) mainCHECK_PARAMETER_VALUE )
	{
		xToggleRate = mainERROR_TOGGLE_PERIOD;
	}

	/* Initialise xLastWakeTime before it is used.  After this point it is not
	written to directly. */
	xLastWakeTime = xTaskGetTickCount();

	/* Cycle for ever, delaying then checking all the other tasks are still
	operating without error. */
	for( ;; )
	{
		/* Wait until it is time to check all the other tasks again. */
		vTaskDelayUntil( &xLastWakeTime, xToggleRate );

		if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
		{
			xToggleRate = mainERROR_TOGGLE_PERIOD;
		}

		if( sRegTestStatus != pdPASS )
		{
			xToggleRate = mainERROR_TOGGLE_PERIOD;
		}

		#ifdef __IAR_78K0R_Kx3__
		{
			/* Only the Kx3 runs all the tasks. */
			if( xArePollingQueuesStillRunning() != pdTRUE)
			{
				xToggleRate = mainERROR_TOGGLE_PERIOD;
			}
		
			if( xAreSemaphoreTasksStillRunning() != pdTRUE)
			{
				xToggleRate = mainERROR_TOGGLE_PERIOD;
			}
			
			if( xAreGenericQueueTasksStillRunning() != pdTRUE )
			{
				xToggleRate = mainERROR_TOGGLE_PERIOD;
			}	
		
			if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
			{
				xToggleRate = mainERROR_TOGGLE_PERIOD;
			}			
		}
		#endif
		
		/* Toggle the LED.  The toggle rate will depend on whether or not an
		error has been found in any tasks. */
		mainLED_0 = !mainLED_0;
	}
}
Exemplo n.º 10
0
static void prvCheckTask( void *pvParameters )
{
TickType_t xDelayPeriod = mainNO_ERROR_DELAY, xLastWakeTime;
unsigned portBASE_TYPE uxLEDToUse = 0;

	/* Ensure parameter is passed in correctly. */
	if( pvParameters != mainCHECK_PARAMETER )
	{
		xDelayPeriod = mainERROR_DELAY;
	}
	
	/* Initialise xLastWakeTime before it is used.  After this point it is not
	written to directly. */
	xLastWakeTime = xTaskGetTickCount();
	
	/* Cycle for ever, delaying then checking all the other tasks are still
	operating without error. */
	for( ;; )
	{
		/* Wait until it is time to check all the other tasks again. */
		vTaskDelayUntil( &xLastWakeTime, xDelayPeriod );
		
		if( lRegTestStatus != pdPASS )
		{
			xDelayPeriod = mainERROR_DELAY;
		}
		
		if( xAreGenericQueueTasksStillRunning() != pdTRUE )
		{
			xDelayPeriod = mainERROR_DELAY;
		}

		if( xAreQueuePeekTasksStillRunning() != pdTRUE )
		{
			xDelayPeriod = mainERROR_DELAY;
		}

		if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	    {
	    	xDelayPeriod = mainERROR_DELAY;
	    }

		if( xIsCreateTaskStillRunning() != pdTRUE )
	    {
	    	xDelayPeriod = mainERROR_DELAY;
	    }

		/* The Fx3 runs more tasks, so more checks are performed. */		
		#ifdef __IAR_V850ES_Fx3__
		{
			if( xAreComTestTasksStillRunning() != pdTRUE )
			{
				xDelayPeriod = mainERROR_DELAY;
			}
			
			if( xArePollingQueuesStillRunning() != pdTRUE )
			{
				xDelayPeriod = mainERROR_DELAY;
			}

			if( xAreBlockingQueuesStillRunning() != pdTRUE )
			{
				xDelayPeriod = mainERROR_DELAY;
			}
			
			if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
			{
				xDelayPeriod = mainERROR_DELAY;
			}		
			
			/* The application board has more LEDs and uses the flash tasks
			so the check task instead uses LED3 as LED3 is still spare. */
			uxLEDToUse = 3;
		}
		#endif

		/* Toggle the LED.  The toggle rate will depend on whether or not an
		error has been found in any tasks. */
		vParTestToggleLED( uxLEDToUse );
	}
}
Exemplo n.º 11
0
static long prvCheckOtherTasksAreStillRunning( void )
{
long lReturn = pdPASS;
unsigned long ulHighFrequencyTimerTaskIterations, ulExpectedIncFrequency_ms;

	/* Check all the demo tasks (other than the flash tasks) to ensure
	that they are all still running, and that none have detected an error. */

	if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if( xAreComTestTasksStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if( xAreBlockingQueuesStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if ( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if ( xAreGenericQueueTasksStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if ( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if( prvAreRegTestTasksStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if( xIsCreateTaskStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if( xAreTimerDemoTasksStillRunning( mainNO_ERROR_FLASH_PERIOD_MS ) != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if( xArePollingQueuesStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	/* Obtain the number of times the task associated with the high frequency
	(interrupt nesting) timer test has increment since the check task last
	executed, and the frequency at which it is expected to execute in ms. */
	ulHighFrequencyTimerTaskIterations = ulInterruptNestingTestGetIterationCount( &ulExpectedIncFrequency_ms );
	if( ( ulHighFrequencyTimerTaskIterations < ( ( mainNO_ERROR_FLASH_PERIOD_MS / ulExpectedIncFrequency_ms ) - 1 ) )
		||
		( ulHighFrequencyTimerTaskIterations > ( ( mainNO_ERROR_FLASH_PERIOD_MS / ulExpectedIncFrequency_ms ) +5 ) )
	  )
	{
		/* Would have expected the high frequency timer task to have
		incremented its execution count more times that reported. */
		lReturn = pdFAIL;
	}

	return lReturn;
}
Exemplo n.º 12
0
static void prvCheckTask( void *pvParameters )
{
TickType_t xNextWakeTime;
const TickType_t xCycleFrequency = pdMS_TO_TICKS( 2500UL );

	/* Just to remove compiler warning. */
	( void ) pvParameters;

	/* Initialise xNextWakeTime - this only needs to be done once. */
	xNextWakeTime = xTaskGetTickCount();

	for( ;; )
	{
		/* Place this task in the blocked state until it is time to run again. */
		vTaskDelayUntil( &xNextWakeTime, xCycleFrequency );

		/* Check the standard demo tasks are running without error. */
		#if( configUSE_PREEMPTION != 0 )
		{
			/* These tasks are only created when preemption is used. */
			if( xAreTimerDemoTasksStillRunning( xCycleFrequency ) != pdTRUE )
			{
				pcStatusMessage = "Error: TimerDemo";
			}
		}
		#endif

		if( xAreTaskNotificationTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error:  Notification";
		}

		if( xAreInterruptSemaphoreTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: IntSem";
		}
		else if( xAreEventGroupTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: EventGroup";
		}
		else if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: IntMath";
		}
		else if( xAreGenericQueueTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: GenQueue";
		}
		else if( xAreQueuePeekTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: QueuePeek";
		}
		else if( xAreBlockingQueuesStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: BlockQueue";
		}
		else if( xAreSemaphoreTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: SemTest";
		}
		else if( xArePollingQueuesStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: PollQueue";
		}
		else if( xAreMathsTaskStillRunning() != pdPASS )
		{
			pcStatusMessage = "Error: Flop";
		}
		else if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: RecMutex";
		}
		else if( xAreCountingSemaphoreTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: CountSem";
		}
		else if( xIsCreateTaskStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: Death";
		}
		else if( xAreDynamicPriorityTasksStillRunning() != pdPASS )
		{
			pcStatusMessage = "Error: Dynamic";
		}
		else if( xAreQueueSetTasksStillRunning() != pdPASS )
		{
			pcStatusMessage = "Error: Queue set";
		}
		else if( xIsQueueOverwriteTaskStillRunning() != pdPASS )
		{
			pcStatusMessage = "Error: Queue overwrite";
		}
		else if( xAreQueueSetPollTasksStillRunning() != pdPASS )
		{
			pcStatusMessage = "Error: Queue set polling";
		}
		else if( xAreBlockTimeTestTasksStillRunning() != pdPASS )
		{
			pcStatusMessage = "Error: Block time";
		}
		else if( xAreAbortDelayTestTasksStillRunning() != pdPASS )
		{
			pcStatusMessage = "Error: Abort delay";
		}

		#if( configSUPPORT_STATIC_ALLOCATION == 1 )
			else if( xAreStaticAllocationTasksStillRunning() != pdPASS )
			{
				pcStatusMessage = "Error: Static allocation";
			}
		#endif /* configSUPPORT_STATIC_ALLOCATION */

		/* This is the only task that uses stdout so its ok to call printf()
		directly. */
		printf( "%s - tick count %d - free heap %d - min free heap %d\r\n", pcStatusMessage,
																			xTaskGetTickCount(),
																			xPortGetFreeHeapSize(),
																			xPortGetMinimumEverFreeHeapSize() );
	}
}
Exemplo n.º 13
0
static void prvCheckTask( void *pvParameters )
{
portTickType xNextWakeTime;
const portTickType xCycleFrequency = 1000 / portTICK_RATE_MS;
char *pcStatusMessage = "OK";

	/* Just to remove compiler warning. */
	( void ) pvParameters;

	/* Initialise xNextWakeTime - this only needs to be done once. */
	xNextWakeTime = xTaskGetTickCount();

	for( ;; )
	{
		/* Place this task in the blocked state until it is time to run again. */
		vTaskDelayUntil( &xNextWakeTime, xCycleFrequency );

		/* Check the standard demo tasks are running without error. */
		if( xAreTimerDemoTasksStillRunning( xCycleFrequency ) != pdTRUE )
		{
			pcStatusMessage = "Error: TimerDemo";
		}
	    else if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
	    {
			pcStatusMessage = "Error: IntMath";
	    }	
		else if( xAreGenericQueueTasksStillRunning() != pdTRUE )
		{			
			pcStatusMessage = "Error: GenQueue";
		}
		else if( xAreQueuePeekTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: QueuePeek";
		}
		else if( xAreBlockingQueuesStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: BlockQueue";
		}
	    else if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	    {
			pcStatusMessage = "Error: SemTest";
	    }
	    else if( xArePollingQueuesStillRunning() != pdTRUE )
	    {
			pcStatusMessage = "Error: PollQueue";
	    }
		else if( xAreMathsTaskStillRunning() != pdPASS )
		{
			pcStatusMessage = "Error: Flop";
		}
	    else if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
	    {
			pcStatusMessage = "Error: RecMutex";
		}
		else if( xAreCountingSemaphoreTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: CountSem";
		}

		/* This is the only task that uses stdout so its ok to call printf() 
		directly. */
		printf( "%s - %d\r\n", pcStatusMessage, xTaskGetTickCount() );
	}
}
Exemplo n.º 14
0
static void prvCheckTimerCallback( TimerHandle_t xTimer )
{
static long lChangedTimerPeriodAlready = pdFALSE;
static unsigned long ulLastRegTest1Value = 0, ulLastRegTest2Value = 0, ulLastHighFrequencyTimerInterrupts = 0;
static const unsigned long ulExpectedHighFrequencyInterrupts = ( ( mainTEST_INTERRUPT_FREQUENCY / 1000UL ) * mainCHECK_TIMER_PERIOD_MS ) - 10; /* 10 allows for a margin of error. */
unsigned long ulErrorOccurred = pdFALSE;

/* The count of the high frequency timer interrupts. */
extern unsigned long ulHighFrequencyTimerInterrupts;

	/* Avoid compiler warnings. */
	( void ) xTimer;

	/* Check that the register test 1 task is still running. */
	if( ulLastRegTest1Value == ulRegTest1Cycles )
	{
		ulErrorOccurred |= ( 0x01UL << 1UL );
	}
	ulLastRegTest1Value = ulRegTest1Cycles;


	/* Check that the register test 2 task is still running. */
	if( ulLastRegTest2Value == ulRegTest2Cycles )
	{
		ulErrorOccurred |= ( 0x01UL << 2UL );
	}
	ulLastRegTest2Value = ulRegTest2Cycles;

	/* Have any of the standard demo tasks detected an error in their
	operation? */
	if( xAreGenericQueueTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 3UL );
	}
	else if( xAreQueuePeekTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 4UL );
	}
	else if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 5UL );
	}
	else if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 6UL );
	}
	else if( xAreIntQueueTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 7UL );
	}
	else if( xAreCountingSemaphoreTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 8UL );
	}
	else if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 9UL );
	}
	else if( xIsQueueOverwriteTaskStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 10UL );
	}
	else if( xAreQueueSetTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 11UL );
	}
	else if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 12UL );
	}
	else if( xAreEventGroupTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 13UL );
	}
	else if( xAreMathsTaskStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 15UL );
	}

	/* Ensure the expected number of high frequency interrupts have occurred. */
	if( ulLastHighFrequencyTimerInterrupts != 0 )
	{
		if( ( ulHighFrequencyTimerInterrupts - ulLastHighFrequencyTimerInterrupts ) < ulExpectedHighFrequencyInterrupts )
		{
			ulErrorOccurred |= ( 0x01UL << 14UL );
		}
	}
	ulLastHighFrequencyTimerInterrupts = ulHighFrequencyTimerInterrupts;

	if( ulErrorOccurred != pdFALSE )
	{
		/* An error occurred.  Increase the frequency at which the check timer
		toggles its LED to give visual feedback of the potential error
		condition. */
		if( lChangedTimerPeriodAlready == pdFALSE )
		{
			lChangedTimerPeriodAlready = pdTRUE;

			/* This call to xTimerChangePeriod() uses a zero block time.
			Functions called from inside of a timer callback function must
			*never* attempt	to block as to do so could impact other software
			timers. */
			xTimerChangePeriod( xTimer, ( mainERROR_CHECK_TIMER_PERIOD_MS ), mainDONT_BLOCK );
		}
	}

	vParTestToggleLED( mainCHECK_LED );
}
Exemplo n.º 15
0
void vCheckTask( void *pvParameters )
{
unsigned long ulRow = 0;
portTickType xDelay = 0;
unsigned short usErrorCode = 0;
unsigned long ulIteration = 0;
extern unsigned portSHORT usMaxJitter;

	/* Intialise the sleeper. */
	xDelay = xTaskGetTickCount();
	
	for( ;; )
	{
		/* Perform this check every mainCHECK_DELAY milliseconds. */
		vTaskDelayUntil( &xDelay, mainCHECK_DELAY );
		
		/* Check that all of the Demo tasks are still running. */
		if( pdTRUE != xAreBlockingQueuesStillRunning() )
		{
			usErrorCode |= 0x1;
		}
		
		if( pdTRUE != xAreBlockTimeTestTasksStillRunning() )
		{
			usErrorCode |= 0x2;
		}
		
		if( pdTRUE != xAreCountingSemaphoreTasksStillRunning() )
		{
			usErrorCode |= 0x4;
		}
		
		if( pdTRUE != xIsCreateTaskStillRunning() )
		{
			usErrorCode |= 0x8;
		}
		
		if( pdTRUE != xAreDynamicPriorityTasksStillRunning() )
		{
			usErrorCode |= 0x10;
		}
		
		if( pdTRUE != xAreMathsTaskStillRunning() )
		{
			usErrorCode |= 0x20;
		}
		
		if( pdTRUE != xAreGenericQueueTasksStillRunning() )
		{
			usErrorCode |= 0x40;
		}
		
		if( pdTRUE != xAreIntegerMathsTaskStillRunning() )
		{
			usErrorCode |= 0x80;
		}
		
		if( pdTRUE != xArePollingQueuesStillRunning() )
		{
			usErrorCode |= 0x100;
		}
		
		if( pdTRUE != xAreQueuePeekTasksStillRunning() )
		{
			usErrorCode |= 0x200;
		}
				
		if( pdTRUE != xAreSemaphoreTasksStillRunning() )
		{
			usErrorCode |= 0x400;
		}
		
		if( pdTRUE != xAreComTestTasksStillRunning() )
		{
			usErrorCode |= 0x800;
		}
		
		if( pdTRUE != xAreIntQueueTasksStillRunning() )
		{
			usErrorCode |= 0x1000;
		}

		/* Clear the display. */
		LCD_Character_Display_ClearDisplay();
		if( 0 == usErrorCode )
		{
			LCD_Character_Display_Position( ( ulRow ) & 0x1, 0);
			LCD_Character_Display_PrintString( "Pass: " );
			LCD_Character_Display_PrintNumber( ulIteration++ );
			LCD_Character_Display_Position( ( ++ulRow ) & 0x1, 0 );
			LCD_Character_Display_PrintString( "Jitter(ns):" );
			LCD_Character_Display_PrintNumber( ( usMaxJitter * mainNS_PER_CLOCK ) );
		}
		else
		{
			/* Do something to indicate the failure. */
			LCD_Character_Display_Position( ( ulRow ) & 0x1, 0 );
			LCD_Character_Display_PrintString( "Fail at: " );
			LCD_Character_Display_PrintNumber( ulIteration );
			LCD_Character_Display_Position( ( ++ulRow ) & 0x1, 0 );
			LCD_Character_Display_PrintString( "Error: 0x" );
			LCD_Character_Display_PrintHexUint16( usErrorCode );
		}
	}
}
Exemplo n.º 16
0
static void prvCheckTimerCallback( TimerHandle_t xTimer )
{
static long lChangedTimerPeriodAlready = pdFALSE, lErrorStatus = pdPASS;
static volatile unsigned long ulLastRegTest1CycleCount = 0UL, ulLastRegTest2CycleCount = 0UL;

	/* Remove compiler warnings about unused parameters. */
	( void ) xTimer;

	/* Check the standard demo tasks are running without error. */
	if( xAreGenericQueueTasksStillRunning() != pdTRUE )
	{
		lErrorStatus = pdFAIL;
	}
	else if( xIsCreateTaskStillRunning() != pdTRUE )
	{
		lErrorStatus = pdFAIL;
	}
	else if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
	{
		lErrorStatus = pdFAIL;
	}
	else if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
	{
		lErrorStatus = pdFAIL;
	}

	/* Check the reg test tasks are still cycling.  They will stop incrementing
	their loop counters if they encounter an error. */
	if( ulRegTest1CycleCount == ulLastRegTest1CycleCount )
	{
		lErrorStatus = pdFAIL;
	}

	if( ulRegTest2CycleCount == ulLastRegTest2CycleCount )
	{
		lErrorStatus = pdFAIL;
	}

	/* Remember the loop counter values this time around so they can be checked
	again the next time this callback function executes. */
	ulLastRegTest1CycleCount = ulRegTest1CycleCount;
	ulLastRegTest2CycleCount = ulRegTest2CycleCount;

	/* Toggle the check LED to give an indication of the system status.  If
	the LED toggles every three seconds then everything is ok.  A faster toggle
	indicates an error. */
	vParTestToggleLED( mainCHECK_LED );

	/* Was an error detected this time through the callback execution? */
	if( lErrorStatus != pdPASS )
	{
		if( lChangedTimerPeriodAlready == pdFALSE )
		{
			lChangedTimerPeriodAlready = pdTRUE;

			/* This call to xTimerChangePeriod() uses a zero block time.
			Functions called from inside of a timer callback function must
			*never* attempt	to block. */
			xTimerChangePeriod( xCheckTimer, ( mainERROR_CHECK_TIMER_PERIOD_MS ), mainDONT_BLOCK );
		}
	}
}
Exemplo n.º 17
0
void vApplicationTickHook( void )
{
static unsigned long ulCallCount = 0, ulErrorFound = pdFALSE;

/* The rate at which LED D4 will toggle if an error has been found in one or 
more of the standard demo tasks. */
const unsigned long ulErrorFlashRate = 500 / portTICK_RATE_MS;

/* The rate at which LED D4 will toggle if no errors have been found in any
of the standard demo tasks. */
const unsigned long ulNoErrorCheckRate = 5000 / portTICK_RATE_MS;

	ulCallCount++;

	if( ulErrorFound != pdFALSE )
	{
		/* We have already found an error, so flash the LED with the appropriate
		frequency. */
		if( ulCallCount > ulErrorFlashRate )
		{
			ulCallCount = 0;
			vParTestToggleLED( mainERROR_LED );
		}
	}
	else
	{
		if( ulCallCount > ulNoErrorCheckRate )
		{
			ulCallCount = 0;
			
			/* We have not yet found an error.  Check all the demo tasks to ensure
			this is still the case. */
			
			if( xAreBlockingQueuesStillRunning() != pdTRUE )
			{
				ulErrorFound |= 0x01;
			}
			
			if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
			{
				ulErrorFound |= 0x02;
			}
	
			if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
			{
				ulErrorFound |= 0x04;
			}
			
			if( xAreGenericQueueTasksStillRunning() != pdTRUE )
			{
				ulErrorFound |= 0x08;
			}
			
			if( xAreQueuePeekTasksStillRunning() != pdTRUE )
			{
				ulErrorFound |= 0x10;
			}
			
			vParTestToggleLED( mainERROR_LED );
		}
	}
}
Exemplo n.º 18
0
static void prvCheckTimerCallback( TimerHandle_t xTimer )
{
static long lChangedTimerPeriodAlready = pdFALSE;

	/* Check the standard demo tasks are running without error.   Latch the
	latest reported error in the pcStatusMessage character pointer.  The latched
	string can be viewed using the embedded web server - it is displayed at
	the bottom of the served "task stats" page. */
	if( xAreGenericQueueTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: GenQueue";
	}

	if( xAreQueuePeekTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: QueuePeek\n";
	}

	if( xAreBlockingQueuesStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: BlockQueue\n";
	}

	if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: BlockTime\n";
	}

	if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: SemTest\n";
	}

	if( xIsCreateTaskStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: Death\n";
	}

	if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: RecMutex\n";
	}

	if( xAreTimerDemoTasksStillRunning( ( mainCHECK_TIMER_PERIOD_MS ) ) != pdTRUE )
	{
		pcStatusMessage = "Error: TimerDemo\n";
	}

	if( xArePollingQueuesStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: PollQueue\n";
	}

	if( xAreCountingSemaphoreTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: CountSem\n";
	}

	if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: DynamicPriority\n";
	}

	/* Toggle the check LED to give an indication of the system status.  If
	the LED toggles every mainCHECK_TIMER_PERIOD_MS milliseconds then
	everything is ok.  A faster toggle indicates an error. */
	vParTestToggleLED( mainCHECK_LED );

	/* Have any errors been latch in pcStatusMessage?  If so, shorten the
	period of the check timer to mainERROR_CHECK_TIMER_PERIOD_MS milliseconds.
	This will result in an increase in the rate at which mainCHECK_LED
	toggles. */
	if( pcStatusMessage != NULL )
	{
		if( lChangedTimerPeriodAlready == pdFALSE )
		{
			lChangedTimerPeriodAlready = pdTRUE;

			/* This call to xTimerChangePeriod() uses a zero block time.
			Functions called from inside of a timer callback function must
			*never* attempt	to block. */
			xTimerChangePeriod( xCheckTimer, ( mainERROR_CHECK_TIMER_PERIOD_MS ), mainDONT_BLOCK );
		}
	}
}
Exemplo n.º 19
0
static void prvCheckTimerCallback( xTimerHandle xTimer )
{
static long lChangeToRedLEDsAlready = pdFALSE;
static unsigned long ulLastRegTest1Counter = 0, ulLastRegTest2Counter = 0;
unsigned long ulErrorFound = pdFALSE;
/* LEDs are defaulted to use the Green LEDs.  The Red LEDs are used if an error
is found. */
static unsigned long ulLED1 = 8, ulLED2 = 11;
const unsigned long ulRedLED1 = 6, ulRedLED2 = 9;

	/* Check all the demo tasks (other than the flash tasks) to ensure
	they are all still running, and that none have detected an error. */

	if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if( xAreBlockingQueuesStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if ( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if ( xAreGenericQueueTasksStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if ( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if( xIsCreateTaskStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if( xArePollingQueuesStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if( xAreMathsTaskStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	if( xAreComTestTasksStillRunning() != pdTRUE )
	{
		ulErrorFound = pdTRUE;
	}

	/* Check the reg test tasks are still cycling.  They will stop
	incrementing their loop counters if they encounter an error. */
	if( ulRegTest1Counter == ulLastRegTest1Counter )
	{
		ulErrorFound = pdTRUE;
	}

	if( ulRegTest2Counter == ulLastRegTest2Counter )
	{
		ulErrorFound = pdTRUE;
	}

	ulLastRegTest1Counter = ulRegTest1Counter;
	ulLastRegTest2Counter = ulRegTest2Counter;

	/* Toggle the check LEDs to give an indication of the system status.  If
	the green LEDs are toggling, then no errors have been detected.  If the red
	LEDs are toggling, then an error has been reported in at least one task. */
	vParTestToggleLED( ulLED1 );
	vParTestToggleLED( ulLED2 );
	
	/* Have any errors been latch in ulErrorFound?  If so, ensure the gree LEDs
	are off, then switch to using the red LEDs. */
	if( ulErrorFound != pdFALSE )
	{
		if( lChangeToRedLEDsAlready == pdFALSE )
		{
			lChangeToRedLEDsAlready = pdTRUE;
			
			/* An error has been found.  Switch to use the red LEDs. */
			vParTestSetLED( ulLED1, pdFALSE );
			vParTestSetLED( ulLED2, pdFALSE );
			ulLED1 = ulRedLED1;
			ulLED2 = ulRedLED2;
		}
	}
}
Exemplo n.º 20
0
static short prvCheckOtherTasksAreStillRunning( void )
{
portBASE_TYPE lReturn = pdPASS;

	/* The demo tasks maintain a count that increments every cycle of the task
	provided that the task has never encountered an error.  This function
	checks the counts maintained by the tasks to ensure they are still being
	incremented.  A count remaining at the same value between calls therefore
	indicates that an error has been detected. */

	if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if( xAreComTestTasksStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if( xAreBlockingQueuesStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if( xAreMathsTaskStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if( xIsCreateTaskStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if ( xAreGenericQueueTasksStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	if ( xAreQueuePeekTasksStillRunning() != pdTRUE )
	{
		lReturn = pdFAIL;
	}

	/* Have the register test tasks found any errors? */
	if( ulRegTestError != pdFALSE )
	{
		lReturn = pdFAIL;
	}

	return lReturn;
}
Exemplo n.º 21
0
void vApplicationTickHook( void )
{
static xOLEDMessage xMessage = { "PASS" };
static unsigned long ulTicksSinceLastDisplay = 0;
portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;

	/* Called from every tick interrupt.  Have enough ticks passed to make it
	time to perform our health status check again? */
	ulTicksSinceLastDisplay++;
	if( ulTicksSinceLastDisplay >= mainCHECK_DELAY )
	{
		ulTicksSinceLastDisplay = 0;

		/* Has an error been found in any task? */
		if( xAreGenericQueueTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN GEN Q";
		}
		else if( xAreQueuePeekTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN PEEK Q";
		}
		else if( xAreBlockingQueuesStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN BLOCK Q";
		}
		else if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN BLOCK TIME";
		}
	    else if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	    {
	        xMessage.pcMessage = "ERROR IN SEMAPHORE";
	    }
	    else if( xArePollingQueuesStillRunning() != pdTRUE )
	    {
	        xMessage.pcMessage = "ERROR IN POLL Q";
	    }
	    else if( xIsCreateTaskStillRunning() != pdTRUE )
	    {
	        xMessage.pcMessage = "ERROR IN CREATE";
	    }
	    else if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
	    {
	        xMessage.pcMessage = "ERROR IN MATH";
	    }
	    else if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
	    {
	    	xMessage.pcMessage = "ERROR IN REC MUTEX";
	    }
		else if( ulIdleError != pdFALSE )
		{
			xMessage.pcMessage = "ERROR IN HOOK";
		}
		else if( xAreIntQueueTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN INT QUEUE";
		}


		/* Send the message to the OLED gatekeeper for display. */
		xHigherPriorityTaskWoken = pdFALSE;
		xQueueSendFromISR( xOLEDQueue, &xMessage, &xHigherPriorityTaskWoken );
	}
}
Exemplo n.º 22
0
static void prvCheckTimerCallback( TimerHandle_t xTimer )
{
static long lChangedTimerPeriodAlready = pdFALSE;
static unsigned long ulLastRegTest1Value = 0, ulLastRegTest2Value = 0;
unsigned long ulErrorOccurred = pdFALSE;

	/* Avoid compiler warnings. */
	( void ) xTimer;

	/* Have any of the standard demo tasks detected an error in their
	operation? */
	if( xAreGenericQueueTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 3UL );
	}
	else if( xAreQueuePeekTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 4UL );
	}
	else if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 5UL );
	}
	else if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 6UL );
	}
	else if( xAreCountingSemaphoreTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 8UL );
	}
	else if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 9UL );
	}
	else if( xIsQueueOverwriteTaskStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 10UL );
	}
	else if( xAreQueueSetTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 11UL );
	}
	else if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 12UL );
	}
	else if( xAreEventGroupTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 13UL );
	}
	else if( xAreTaskNotificationTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 14UL );
	}
	else if( xAreInterruptSemaphoreTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= ( 0x01UL << 15UL );
	}
	else if( xAreTimerDemoTasksStillRunning( mainCHECK_TIMER_PERIOD_MS ) != pdTRUE )
	{
		ulErrorOccurred |= 1UL << 16UL;
	}	
	else if( xAreIntQueueTasksStillRunning() != pdTRUE )
	{
		ulErrorOccurred |= 1UL << 17UL;
	}

	
	/* Check that the register test 1 task is still running. */
	if( ulLastRegTest1Value == ulRegTest1LoopCounter )
	{
		ulErrorOccurred |= 1UL << 18UL;
	}
	ulLastRegTest1Value = ulRegTest1LoopCounter;

	/* Check that the register test 2 task is still running. */
	if( ulLastRegTest2Value == ulRegTest2LoopCounter )
	{
		ulErrorOccurred |= 1UL << 19UL;
	}
	ulLastRegTest2Value = ulRegTest2LoopCounter;

	if( ulErrorOccurred != pdFALSE )
	{
		/* An error occurred.  Increase the frequency at which the check timer
		toggles its LED to give visual feedback of the potential error
		condition. */
		if( lChangedTimerPeriodAlready == pdFALSE )
		{
			lChangedTimerPeriodAlready = pdTRUE;

			/* This call to xTimerChangePeriod() uses a zero block time.
			Functions called from inside of a timer callback function must
			*never* attempt	to block as to do so could impact other software
			timers. */
			xTimerChangePeriod( xTimer, ( mainERROR_CHECK_TIMER_PERIOD_MS ), mainDONT_BLOCK );
		}
	}

	/* Toggle the LED to give visual feedback of the system status.  The rate at
	which the LED toggles will increase to mainERROR_CHECK_TIMER_PERIOD_MS if a
	suspected error has been found in any of the standard demo tasks. */
	vParTestToggleLED( mainCHECK_LED );
}
Exemplo n.º 23
0
static void prvCheckTimerCallback( TimerHandle_t xTimer )
{
	/* Check the standard demo tasks are running without error.   Latch the
	latest reported error in the pcStatusMessage character pointer. */
	if( xAreGenericQueueTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: GenQueue";
	}

	if( xAreQueuePeekTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: QueuePeek\r\n";
	}

	if( xAreBlockingQueuesStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: BlockQueue\r\n";
	}

	if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: BlockTime\r\n";
	}

	if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: SemTest\r\n";
	}

	if( xIsCreateTaskStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: Death\r\n";
	}

	if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: RecMutex\r\n";
	}

	if( xAreTimerDemoTasksStillRunning( ( mainCHECK_TIMER_PERIOD_MS ) ) != pdTRUE )
	{
		pcStatusMessage = "Error: TimerDemo";
	}

	/* Toggle the check LED to give an indication of the system status.  If
	the LED toggles every mainCHECK_TIMER_PERIOD_MS milliseconds then
	everything is ok.  A faster toggle indicates an error. */
	vParTestToggleLED( mainCHECK_LED );

	/* Have any errors been latch in pcStatusMessage?  If so, shorten the
	period of the check timer to mainERROR_CHECK_TIMER_PERIOD_MS milliseconds.
	This will result in an increase in the rate at which mainCHECK_LED
	toggles. */
	if( pcStatusMessage != NULL )
	{
		/* This call to xTimerChangePeriod() uses a zero block time.  Functions
		called from inside of a timer callback function must *never* attempt
		to block. */
		xTimerChangePeriod( xCheckTimer, ( mainERROR_CHECK_TIMER_PERIOD_MS ), mainDONT_BLOCK );
	}
}
Exemplo n.º 24
0
static void prvCheckOtherTasksAreStillRunning( void )
{
static portSHORT sErrorHasOccurred = pdFALSE;

	if( prvCheckMathTasksAreStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Maths task count unchanged!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreComTestTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Com test count unchanged!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreBlockingQueuesStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Blocking queues count unchanged!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreAltBlockingQueuesStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Alt blocking queues count unchanged!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xArePollingQueuesStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Polling queue count unchanged!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreAltPollingQueuesStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Alt polling queue count unchanged!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xIsCreateTaskStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Incorrect number of tasks running!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Semaphore take count unchanged!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Dynamic priority count unchanged!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}
	
	if( xAreMultiEventTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in multi events tasks!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreFlashCoRoutinesStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in co-routine flash tasks!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreHookCoRoutinesStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in tick hook to co-routine communications!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in block time test tasks!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreAltBlockTimeTestTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in fast block time test tasks!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreGenericQueueTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in generic queue test task!\r\n" );
		sErrorHasOccurred = pdTRUE;		
	}

	if( xAreAltGenericQueueTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in fast generic queue test task!\r\n" );
		sErrorHasOccurred = pdTRUE;		
	}

	if( xAreQueuePeekTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in queue peek test task!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreCountingSemaphoreTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in counting semaphore demo task!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in recursive mutex tasks!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( sErrorHasOccurred == pdFALSE )
	{
		vDisplayMessage( "OK " );
	}
}
Exemplo n.º 25
0
static void prvCheckTask( void *pvParameters )
{
static volatile unsigned long ulLastRegTest1CycleCount = 0UL, ulLastRegTest2CycleCount = 0UL;
TickType_t xNextWakeTime, xCycleFrequency = mainNO_ERROR_CYCLE_TIME;
extern void vSetupHighFrequencyTimer( void );

	/* If this is being executed then the kernel has been started.  Start the high
	frequency timer test as described at the top of this file.  This is only
	included in the optimised build configuration - otherwise it takes up too much
	CPU time. */
	#ifdef INCLUDE_HIGH_FREQUENCY_TIMER_TEST
		vSetupHighFrequencyTimer();
	#endif

	/* Initialise xNextWakeTime - this only needs to be done once. */
	xNextWakeTime = xTaskGetTickCount();

	for( ;; )
	{
		/* Place this task in the blocked state until it is time to run again. */
		vTaskDelayUntil( &xNextWakeTime, xCycleFrequency );

		/* Check the standard demo tasks are running without error. */
		if( xAreGenericQueueTasksStillRunning() != pdTRUE )
		{
			/* Increase the rate at which this task cycles, which will increase the
			rate at which mainCHECK_LED flashes to give visual feedback that an error
			has occurred. */			
			pcStatusMessage = "Error: GenQueue";
			xPrintf( pcStatusMessage );
		}
		
		if( xAreQueuePeekTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: QueuePeek\r\n";
			xPrintf( pcStatusMessage );
		}
		
		if( xAreBlockingQueuesStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: BlockQueue\r\n";
			xPrintf( pcStatusMessage );
		}
		
		if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: BlockTime\r\n";
			xPrintf( pcStatusMessage );
		}
		
		if( xAreSemaphoreTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: SemTest\r\n";
			xPrintf( pcStatusMessage );
		}
		
		if( xArePollingQueuesStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: PollQueue\r\n";
			xPrintf( pcStatusMessage );
		}
		
		if( xIsCreateTaskStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: Death\r\n";
			xPrintf( pcStatusMessage );
		}
		
		if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: IntMath\r\n";
			xPrintf( pcStatusMessage );
		}
		
		if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: RecMutex\r\n";
			xPrintf( pcStatusMessage );
		}
		
		if( xAreIntQueueTasksStillRunning() != pdPASS )
		{
			pcStatusMessage = "Error: IntQueue\r\n";
			xPrintf( pcStatusMessage );
		}
		
		if( xAreMathsTaskStillRunning() != pdPASS )
		{
			pcStatusMessage = "Error: Flop\r\n";
			xPrintf( pcStatusMessage );
		}

		/* Check the reg test tasks are still cycling.  They will stop incrementing
		their loop counters if they encounter an error. */
		if( ulRegTest1CycleCount == ulLastRegTest1CycleCount )
		{
			pcStatusMessage = "Error: RegTest1\r\n";
			xPrintf( pcStatusMessage );
		}

		if( ulRegTest2CycleCount == ulLastRegTest2CycleCount )
		{
			pcStatusMessage = "Error: RegTest2\r\n";
			xPrintf( pcStatusMessage );
		}

		ulLastRegTest1CycleCount = ulRegTest1CycleCount;
		ulLastRegTest2CycleCount = ulRegTest2CycleCount;

		/* Toggle the check LED to give an indication of the system status.  If
		the LED toggles every 5 seconds then everything is ok.  A faster toggle
		indicates an error. */
		vParTestToggleLED( mainCHECK_LED );
		
		/* Ensure the LED toggles at a faster rate if an error has occurred. */
		if( pcStatusMessage != NULL )
		{
			xCycleFrequency = mainERROR_CYCLE_TIME;
		}
	}
}
Exemplo n.º 26
0
static void prvCheckTask( void *pvParameters )
{
TickType_t xDelayPeriod = mainNO_ERROR_CHECK_TASK_PERIOD;
TickType_t xLastExecutionTime;
static unsigned long ulLastRegTest1Value = 0, ulLastRegTest2Value = 0;
unsigned long ulErrorFound = pdFALSE;

	/* Just to stop compiler warnings. */
	( void ) pvParameters;

	/* Initialise xLastExecutionTime so the first call to vTaskDelayUntil()
	works correctly. */
	xLastExecutionTime = xTaskGetTickCount();

	/* Cycle for ever, delaying then checking all the other tasks are still
	operating without error.  The onboard LED is toggled on each iteration.
	If an error is detected then the delay period is decreased from
	mainNO_ERROR_CHECK_TASK_PERIOD to mainERROR_CHECK_TASK_PERIOD.  This has the
	effect of increasing the rate at which the onboard LED toggles, and in so
	doing gives visual feedback of the system status. */
	for( ;; )
	{
		/* Delay until it is time to execute again. */
		vTaskDelayUntil( &xLastExecutionTime, xDelayPeriod );

		/* Check all the demo tasks (other than the flash tasks) to ensure
		that they are all still running, and that none have detected an error. */
		if( xAreIntQueueTasksStillRunning() != pdTRUE )
		{
			ulErrorFound = 1UL << 0UL;
		}

		if( xAreMathsTaskStillRunning() != pdTRUE )
		{
			ulErrorFound = 1UL << 1UL;
		}

		if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
		{
			ulErrorFound = 1UL << 2UL;
		}

		if( xAreBlockingQueuesStillRunning() != pdTRUE )
		{
			ulErrorFound = 1UL << 3UL;
		}

		if ( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
		{
			ulErrorFound = 1UL << 4UL;
		}

		if ( xAreGenericQueueTasksStillRunning() != pdTRUE )
		{
			ulErrorFound = 1UL << 5UL;
		}

		if ( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
		{
			ulErrorFound = 1UL << 6UL;
		}

		if( xIsCreateTaskStillRunning() != pdTRUE )
		{
			ulErrorFound = 1UL << 7UL;
		}

		if( xAreSemaphoreTasksStillRunning() != pdTRUE )
		{
			ulErrorFound = 1UL << 8UL;
		}

		if( xAreTimerDemoTasksStillRunning( ( TickType_t ) xDelayPeriod ) != pdPASS )
		{
			ulErrorFound = 1UL << 9UL;
		}

		if( xAreCountingSemaphoreTasksStillRunning() != pdTRUE )
		{
			ulErrorFound = 1UL << 10UL;
		}

		if( xIsQueueOverwriteTaskStillRunning() != pdPASS )
		{
			ulErrorFound = 1UL << 11UL;
		}

		if( xAreEventGroupTasksStillRunning() != pdPASS )
		{
			ulErrorFound = 1UL << 12UL;
		}

		if( xAreInterruptSemaphoreTasksStillRunning() != pdPASS )
		{
			ulErrorFound = 1UL << 13UL;
		}

		if( xAreQueueSetTasksStillRunning() != pdPASS )
		{
			ulErrorFound = 1UL << 14UL;
		}

		if( xAreTaskNotificationTasksStillRunning() != pdPASS )
		{
			ulErrorFound = 1UL << 15UL;
		}

		/* Check that the register test 1 task is still running. */
		if( ulLastRegTest1Value == ulRegTest1LoopCounter )
		{
			ulErrorFound = 1UL << 16UL;
		}
		ulLastRegTest1Value = ulRegTest1LoopCounter;

		/* Check that the register test 2 task is still running. */
		if( ulLastRegTest2Value == ulRegTest2LoopCounter )
		{
			ulErrorFound = 1UL << 17UL;
		}
		ulLastRegTest2Value = ulRegTest2LoopCounter;

		/* Toggle the check LED to give an indication of the system status.  If
		the LED toggles every mainNO_ERROR_CHECK_TASK_PERIOD milliseconds then
		everything is ok.  A faster toggle indicates an error. */
		mainTOGGLE_LED();

		if( ulErrorFound != pdFALSE )
		{
			/* An error has been detected in one of the tasks - flash the LED
			at a higher frequency to give visible feedback that something has
			gone wrong. */
			xDelayPeriod = mainERROR_CHECK_TASK_PERIOD;
		}
	}
}
Exemplo n.º 27
0
static void prvCheckTask( void *pvParameters )
{
TickType_t xNextWakeTime;
const TickType_t xCycleFrequency = 2500 / portTICK_PERIOD_MS;

	/* Just to remove compiler warning. */
	( void ) pvParameters;

	/* Initialise xNextWakeTime - this only needs to be done once. */
	xNextWakeTime = xTaskGetTickCount();

	for( ;; )
	{
		/* Place this task in the blocked state until it is time to run again. */
		vTaskDelayUntil( &xNextWakeTime, xCycleFrequency );

		/* Check the standard demo tasks are running without error. */
		#if( configUSE_PREEMPTION != 0 )
		{
			/* These tasks are only created when preemption is used. */
			if( xAreTimerDemoTasksStillRunning( xCycleFrequency ) != pdTRUE )
			{
				pcStatusMessage = "Error: TimerDemo";
			}
		}
		#endif

		if( xAreEventGroupTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: EventGroup";
		}
	    else if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
	    {
			pcStatusMessage = "Error: IntMath";
	    }
		else if( xAreGenericQueueTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: GenQueue";
		}
		else if( xAreQueuePeekTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: QueuePeek";
		}
		else if( xAreBlockingQueuesStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: BlockQueue";
		}
	    else if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	    {
			pcStatusMessage = "Error: SemTest";
	    }
	    else if( xArePollingQueuesStillRunning() != pdTRUE )
	    {
			pcStatusMessage = "Error: PollQueue";
	    }
		else if( xAreMathsTaskStillRunning() != pdPASS )
		{
			pcStatusMessage = "Error: Flop";
		}
	    else if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
	    {
			pcStatusMessage = "Error: RecMutex";
		}
		else if( xAreCountingSemaphoreTasksStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: CountSem";
		}
		else if( xIsCreateTaskStillRunning() != pdTRUE )
		{
			pcStatusMessage = "Error: Death";
		}
		else if( xAreDynamicPriorityTasksStillRunning() != pdPASS )
		{
			pcStatusMessage = "Error: Dynamic";
		}
		else if( xAreQueueSetTasksStillRunning() != pdPASS )
		{
			pcStatusMessage = "Error: Queue set";
		}
		else if( xIsQueueOverwriteTaskStillRunning() != pdPASS )
		{
			pcStatusMessage = "Error: Queue overwrite";
		}

		/* This is the only task that uses stdout so its ok to call printf()
		directly. */
		printf( "%s - %d\r\n", pcStatusMessage, xTaskGetTickCount() );
	}
}
Exemplo n.º 28
0
static void prvCheckTimerCallback( TimerHandle_t xTimer )
{
	/* Check the standard demo tasks are running without error.   Latch the
	latest reported error in the pcStatusMessage character pointer. */
	if( xAreGenericQueueTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: GenQueue";
	}

	if( xAreQueuePeekTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: QueuePeek\r\n";
	}

	if( xAreBlockingQueuesStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: BlockQueue\r\n";
	}

	if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: BlockTime\r\n";
	}

	if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: SemTest\r\n";
	}

	if( xIsCreateTaskStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: Death\r\n";
	}

	if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: RecMutex\r\n";
	}

	if( xAreComTestTasksStillRunning() != pdPASS )
	{
		pcStatusMessage = "Error: ComTest\r\n";
	}

	if( xAreTimerDemoTasksStillRunning( ( mainCHECK_TIMER_PERIOD_MS ) ) != pdTRUE )
	{
		pcStatusMessage = "Error: TimerDemo";
	}

	if( xArePollingQueuesStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: PollQueue";
	}

	if( xAreCountingSemaphoreTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: CountSem";
	}

	if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
	{
		pcStatusMessage = "Error: DynamicPriority";
	}

	/* Toggle the check LED to give an indication of the system status.  If
	the LED toggles every mainCHECK_TIMER_PERIOD_MS milliseconds then
	everything is ok.  A faster toggle indicates an error.  vParTestToggleLED()
	is not used to toggle this particular LED as it is on a different IP port
	to to the LEDs controlled by ParTest.c.  A critical section is not required
	as the only other place this port is accessed is from another timer - and
	only one timer can be running at any one time. */
	if( ( FM3_GPIO->PDOR3 & mainCHECK_LED ) != 0 )
	{
		FM3_GPIO->PDOR3 &= ~mainCHECK_LED;
	}
	else
	{
		FM3_GPIO->PDOR3 |= mainCHECK_LED;
	}

	/* Have any errors been latch in pcStatusMessage?  If so, shorten the
	period of the check timer to mainERROR_CHECK_TIMER_PERIOD_MS milliseconds.
	This will result in an increase in the rate at which mainCHECK_LED
	toggles. */
	if( pcStatusMessage != NULL )
	{
		/* This call to xTimerChangePeriod() uses a zero block time.  Functions
		called from inside of a timer callback function must *never* attempt
		to block. */
		xTimerChangePeriod( xCheckTimer, ( mainERROR_CHECK_TIMER_PERIOD_MS ), mainDONT_BLOCK );
	}
}
Exemplo n.º 29
0
static void prvCheckOtherTasksAreStillRunning( void )
{
static short sErrorHasOccurred = pdFALSE;
static unsigned long long uxLastHookCallCount = 0, uxLastQueueSendCount = 0;

	if( prvCheckMathTasksAreStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Maths task count unchanged!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreComTestTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Com test count unchanged!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreBlockingQueuesStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Blocking queues count unchanged!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreAltBlockingQueuesStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Alt blocking queues count unchanged!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xArePollingQueuesStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Polling queue count unchanged!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreAltPollingQueuesStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Alt polling queue count unchanged!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xIsCreateTaskStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Incorrect number of tasks running!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Semaphore take count unchanged!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Dynamic priority count unchanged!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}
	
	if( xAreMultiEventTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in multi events tasks!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreFlashCoRoutinesStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in co-routine flash tasks!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreHookCoRoutinesStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in tick hook to co-routine communications!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in block time test tasks!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreAltBlockTimeTestTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in fast block time test tasks!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreGenericQueueTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in generic queue test task!\r\n" );
		sErrorHasOccurred = pdTRUE;		
	}

	if( xAreAltGenericQueueTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in fast generic queue test task!\r\n" );
		sErrorHasOccurred = pdTRUE;		
	}

	if( xAreQueuePeekTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in queue peek test task!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreCountingSemaphoreTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in counting semaphore demo task!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
	{
		vDisplayMessage( "Error in recursive mutex tasks!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}

	/* The hook function associated with this task is called each time the task
	is switched in.  We therefore expect the number of times the callback 
	function has been executed to have increrment since the last time this 
	function executed. */
	if( uxCheckTaskHookCallCount <= uxLastHookCallCount )
	{
		vDisplayMessage( "Error in task hook call count!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}
	else
	{
		uxLastHookCallCount = uxCheckTaskHookCallCount;
	}

	/* We would expect some queue sending to occur between calls of this 
	function. */
	if( uxQueueSendPassedCount <= uxLastQueueSendCount )
	{
		vDisplayMessage( "Error in queue send hook call count!\r\n" );
		sErrorHasOccurred = pdTRUE;
	}
	else
	{
		uxLastQueueSendCount = uxQueueSendPassedCount;
	}

	if( sErrorHasOccurred == pdFALSE )
	{
		vDisplayMessage( "OK " );
	}
}
Exemplo n.º 30
0
void vApplicationTickHook( void )
{
    static unsigned short usLastRegTest1Counter = 0, usLastRegTest2Counter = 0;
    static unsigned long ulCounter = 0;
    static const unsigned long ulCheckFrequency = 5000UL / portTICK_RATE_MS;
    portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;

    /* Define the status message that is sent to the LCD task.  By default the
    status is PASS. */
    static xQueueMessage xStatusMessage = { mainMESSAGE_STATUS, pdPASS };

    /* This is called from within the tick interrupt and performs the 'check'
    functionality as described in the comments at the top of this file.

    Is it time to perform the 'check' functionality again? */
    ulCounter++;
    if( ulCounter >= ulCheckFrequency )
    {
        /* See if the standard demo tasks are executing as expected, changing
        the message that is sent to the LCD task from PASS to an error code if
        any tasks set reports an error. */
        if( xAreComTestTasksStillRunning() != pdPASS )
        {
            xStatusMessage.ulMessageValue = mainERROR_COM_TEST;
        }

        if( xAreDynamicPriorityTasksStillRunning() != pdPASS )
        {
            xStatusMessage.ulMessageValue = mainERROR_DYNAMIC_TASKS;
        }

        if( xAreGenericQueueTasksStillRunning() != pdPASS )
        {
            xStatusMessage.ulMessageValue = mainERROR_GEN_QUEUE_TEST;
        }

        /* Check the reg test tasks are still cycling.  They will stop
        incrementing their loop counters if they encounter an error. */
        if( usRegTest1Counter == usLastRegTest1Counter )
        {
            xStatusMessage.ulMessageValue = mainERROR_REG_TEST;
        }

        if( usRegTest2Counter == usLastRegTest2Counter )
        {
            xStatusMessage.ulMessageValue = mainERROR_REG_TEST;
        }

        usLastRegTest1Counter = usRegTest1Counter;
        usLastRegTest2Counter = usRegTest2Counter;

        /* As this is the tick hook the lHigherPriorityTaskWoken parameter is not
        needed (a context switch is going to be performed anyway), but it must
        still be provided. */
        xQueueSendFromISR( xLCDQueue, &xStatusMessage, &xHigherPriorityTaskWoken );
        ulCounter = 0;
    }

    /* Just periodically toggle an LED to show that the tick interrupt is
    running.  Note that this access LED_PORT_OUT in a non-atomic way, so tasks
    that access the same port must do so from a critical section. */
    if( ( ulCounter & 0xff ) == 0 )
    {
        if( ( LED_PORT_OUT & LED_1 ) == 0 )
        {
            LED_PORT_OUT |= LED_1;
        }
        else
        {
            LED_PORT_OUT &= ~LED_1;
        }
    }
}