PyObject* TopoShapeWirePy::fixWire(PyObject *args)
{
PyObject* face=0;
double tol = Precision::Confusion();
if (!PyArg_ParseTuple(args, "|O!d",&(TopoShapeFacePy::Type), &face, &tol))
return 0;
try {
ShapeFix_Wire aFix;
const TopoDS_Wire& w = TopoDS::Wire(getTopoShapePtr()->_Shape);
if (face) {
const TopoDS_Face& f = TopoDS::Face(static_cast<TopoShapePy*>(face)->getTopoShapePtr()->_Shape);
aFix.Init(w, f, tol);
}
else {
aFix.SetPrecision(tol);
aFix.Load(w);
}
aFix.FixReorder();
aFix.FixConnected();
aFix.FixClosed();
getTopoShapePtr()->_Shape = aFix.Wire();
Py_Return;
}
catch (Standard_Failure) {
Handle_Standard_Failure e = Standard_Failure::Caught();
PyErr_SetString(PyExc_Exception, e->GetMessageString());
return 0;
}
}
void Extrusion::makeDraft(ExtrusionParameters params, const TopoDS_Shape& shape, std::list<TopoDS_Shape>& drafts)
{
double distanceFwd = tan(params.taperAngleFwd)*params.lengthFwd;
double distanceRev = tan(params.taperAngleRev)*params.lengthRev;
gp_Vec vecFwd = gp_Vec(params.dir)*params.lengthFwd;
gp_Vec vecRev = gp_Vec(params.dir.Reversed())*params.lengthRev;
bool bFwd = fabs(params.lengthFwd) > Precision::Confusion();
bool bRev = fabs(params.lengthRev) > Precision::Confusion();
bool bMid = !bFwd || !bRev || params.lengthFwd*params.lengthRev > 0.0; //include the source shape as loft section?
TopoDS_Wire sourceWire;
if (shape.IsNull())
Standard_Failure::Raise("Not a valid shape");
if (shape.ShapeType() == TopAbs_WIRE) {
ShapeFix_Wire aFix;
aFix.Load(TopoDS::Wire(shape));
aFix.FixReorder();
aFix.FixConnected();
aFix.FixClosed();
sourceWire = aFix.Wire();
}
else if (shape.ShapeType() == TopAbs_FACE) {
TopoDS_Wire outerWire = ShapeAnalysis::OuterWire(TopoDS::Face(shape));
sourceWire = outerWire;
}
else if (shape.ShapeType() == TopAbs_COMPOUND) {
TopoDS_Iterator it(shape);
for (; it.More(); it.Next()) {
makeDraft(params, it.Value(), drafts);
}
}
else {
Standard_Failure::Raise("Only a wire or a face is supported");
}
if (!sourceWire.IsNull()) {
std::list<TopoDS_Wire> list_of_sections;
//first. add wire for reversed part of extrusion
if (bRev){
gp_Vec translation = vecRev;
double offset = distanceRev;
BRepOffsetAPI_MakeOffset mkOffset;
#if OCC_VERSION_HEX >= 0x060800
mkOffset.Init(GeomAbs_Arc);
#endif
#if OCC_VERSION_HEX >= 0x070000
mkOffset.Init(GeomAbs_Intersection);
#endif
gp_Trsf mat;
mat.SetTranslation(translation);
TopLoc_Location loc(mat);
TopoDS_Wire movedSourceWire = TopoDS::Wire(sourceWire.Moved(loc));
TopoDS_Shape offsetShape;
if (fabs(offset)>Precision::Confusion()){
mkOffset.AddWire(movedSourceWire);
mkOffset.Perform(offset);
offsetShape = mkOffset.Shape();
} else {
//stupid OCC doesn't understand, what to do when offset value is zero =/
offsetShape = movedSourceWire;
}
if (offsetShape.IsNull())
Standard_Failure::Raise("Tapered shape is empty");
TopAbs_ShapeEnum type = offsetShape.ShapeType();
if (type == TopAbs_WIRE) {
list_of_sections.push_back(TopoDS::Wire(offsetShape));
}
else if (type == TopAbs_EDGE) {
BRepBuilderAPI_MakeWire mkWire(TopoDS::Edge(offsetShape));
list_of_sections.push_back(mkWire.Wire());
}
else {
Standard_Failure::Raise("Tapered shape type is not supported");
}
}
//next. Add source wire as middle section. Order is important.
if (bMid){
list_of_sections.push_back(sourceWire);
}
//finally. Forward extrusion offset wire.
if (bFwd){
gp_Vec translation = vecFwd;
double offset = distanceFwd;
BRepOffsetAPI_MakeOffset mkOffset;
#if OCC_VERSION_HEX >= 0x060800
mkOffset.Init(GeomAbs_Arc);
#endif
#if OCC_VERSION_HEX >= 0x070000
mkOffset.Init(GeomAbs_Intersection);
#endif
gp_Trsf mat;
mat.SetTranslation(translation);
TopLoc_Location loc(mat);
TopoDS_Wire movedSourceWire = TopoDS::Wire(sourceWire.Moved(loc));
TopoDS_Shape offsetShape;
if (fabs(offset)>Precision::Confusion()){
mkOffset.AddWire(movedSourceWire);
mkOffset.Perform(offset);
offsetShape = mkOffset.Shape();
} else {
//stupid OCC doesn't understand, what to do when offset value is zero =/
offsetShape = movedSourceWire;
}
if (offsetShape.IsNull())
Standard_Failure::Raise("Tapered shape is empty");
TopAbs_ShapeEnum type = offsetShape.ShapeType();
if (type == TopAbs_WIRE) {
list_of_sections.push_back(TopoDS::Wire(offsetShape));
}
else if (type == TopAbs_EDGE) {
BRepBuilderAPI_MakeWire mkWire(TopoDS::Edge(offsetShape));
list_of_sections.push_back(mkWire.Wire());
}
else {
Standard_Failure::Raise("Tapered shape type is not supported");
}
}
//make loft
BRepOffsetAPI_ThruSections mkGenerator(params.solid ? Standard_True : Standard_False, /*ruled=*/Standard_True);
for (std::list<TopoDS_Wire>::const_iterator it = list_of_sections.begin(); it != list_of_sections.end(); ++it) {
const TopoDS_Wire &wire = *it;
mkGenerator.AddWire(wire);
}
try {
#if defined(__GNUC__) && defined (FC_OS_LINUX)
Base::SignalException se;
#endif
mkGenerator.Build();
drafts.push_back(mkGenerator.Shape());
}
catch (Standard_Failure &){
throw;
}
catch (...) {
throw Base::Exception("Unknown exception from BRepOffsetAPI_ThruSections");
}
}
}