void test_ntscalarArray()
{
testDiag("test_ntscalarArray");
NTScalarArrayBuilderPtr builder = NTScalarArray::createBuilder();
testOk(builder.get() != 0, "Got builder");
NTScalarArrayPtr ntScalarArray = builder->
value(pvInt)->
addDescriptor()->
addAlarm()->
addTimeStamp()->
addDisplay()->
addControl()->
create();
testOk1(ntScalarArray.get() != 0);
testOk1(ntScalarArray->getPVStructure().get() != 0);
testOk1(ntScalarArray->getValue().get() != 0);
testOk1(ntScalarArray->getDescriptor().get() != 0);
testOk1(ntScalarArray->getAlarm().get() != 0);
testOk1(ntScalarArray->getTimeStamp().get() != 0);
testOk1(ntScalarArray->getDisplay().get() != 0);
testOk1(ntScalarArray->getControl().get() != 0);
//
// example how to set values
//
PVIntArray::svector newValues;
newValues.push_back(1);
newValues.push_back(2);
newValues.push_back(8);
PVIntArrayPtr pvValueField = ntScalarArray->getValue<PVIntArray>();
pvValueField->replace(freeze(newValues));
//
// example how to get values
//
PVIntArray::const_svector values(pvValueField->view());
testOk1(values.size() == 3);
testOk1(values[0] == 1);
testOk1(values[1] == 2);
testOk1(values[2] == 8);
//
// timeStamp ops
//
PVTimeStamp pvTimeStamp;
if (ntScalarArray->attachTimeStamp(pvTimeStamp))
{
testPass("timeStamp attach");
// example how to set current time
TimeStamp ts;
ts.getCurrent();
pvTimeStamp.set(ts);
// example how to get EPICS time
TimeStamp ts2;
pvTimeStamp.get(ts2);
testOk1(ts2.getEpicsSecondsPastEpoch() != 0);
}
else
testFail("timeStamp attach fail");
//
// alarm ops
//
PVAlarm pvAlarm;
if (ntScalarArray->attachAlarm(pvAlarm))
{
testPass("alarm attach");
// example how to set an alarm
Alarm alarm;
alarm.setStatus(deviceStatus);
alarm.setSeverity(minorAlarm);
alarm.setMessage("simulation alarm");
pvAlarm.set(alarm);
}
else
testFail("alarm attach fail");
//
// display ops
//
PVDisplay pvDisplay;
if (ntScalarArray->attachDisplay(pvDisplay))
{
testPass("display attach");
// example how to set an display
Display display;
display.setLow(-15);
display.setHigh(15);
display.setDescription("This is a test scalar array");
display.setFormat("%d");
display.setUnits("A");
pvDisplay.set(display);
}
else
testFail("display attach fail");
//
// control ops
//
PVControl pvControl;
if (ntScalarArray->attachControl(pvControl))
{
testPass("control attach");
// example how to set an control
Control control;
control.setLow(-10);
control.setHigh(10);
control.setMinStep(1);
pvControl.set(control);
}
else
testFail("control attach fail");
//
// set descriptor
//
ntScalarArray->getDescriptor()->put("This is a test NTScalarArray");
// dump ntScalarArray
std::cout << *ntScalarArray->getPVStructure() << std::endl;
}
void test_nthistogram()
{
testDiag("test_nthistogram");
NTHistogramBuilderPtr builder = NTHistogram::createBuilder();
testOk(builder.get() != 0, "Got builder");
NTHistogramPtr ntHistogram = builder->
value(pvInt)->
addDescriptor()->
addAlarm()->
addTimeStamp()->
add("extra1",fieldCreate->createScalar(pvString)) ->
add("extra2",fieldCreate->createScalarArray(pvString)) ->
create();
testOk1(ntHistogram.get() != 0);
testOk1(ntHistogram->getPVStructure().get() != 0);
testOk1(ntHistogram->getDescriptor().get() != 0);
testOk1(ntHistogram->getAlarm().get() != 0);
testOk1(ntHistogram->getTimeStamp().get() != 0);
testOk1(ntHistogram->getRanges().get() != 0);
testOk1(ntHistogram->getValue().get() != 0);
testOk1(ntHistogram->getValue<PVIntArray>().get() != 0);
//
// example how to set ranges
//
PVDoubleArray::svector newRanges;
newRanges.push_back(-100.0);
newRanges.push_back(0.0);
newRanges.push_back(100.0);
PVDoubleArrayPtr pvRangesField = ntHistogram->getRanges();
pvRangesField->replace(freeze(newRanges));
//
// example how to get ranges
//
PVDoubleArray::const_svector ranges(pvRangesField->view());
testOk1(ranges.size() == 3);
testOk1(ranges[0] == -100.0);
testOk1(ranges[1] == 0.0);
testOk1(ranges[2] == 100.0);
//
// example how to set value
//
PVIntArray::svector newValue;
newValue.push_back(1);
newValue.push_back(2);
PVIntArrayPtr pvValueField = ntHistogram->getValue<PVIntArray>();
pvValueField->replace(freeze(newValue));
//
// example how to get values for each bin
//
PVIntArray::const_svector value(pvValueField->view());
testOk1(value.size() == 2);
testOk1(value[0] == 1);
testOk1(value[1] == 2);
//
// test isValid
//
testOk1(ntHistogram->isValid());
//
// timeStamp ops
//
PVTimeStamp pvTimeStamp;
if (ntHistogram->attachTimeStamp(pvTimeStamp))
{
testPass("timeStamp attach");
// example how to set current time
TimeStamp ts;
ts.getCurrent();
pvTimeStamp.set(ts);
// example how to get EPICS time
TimeStamp ts2;
pvTimeStamp.get(ts2);
testOk1(ts2.getEpicsSecondsPastEpoch() != 0);
}
else
testFail("timeStamp attach fail");
//
// alarm ops
//
PVAlarm pvAlarm;
if (ntHistogram->attachAlarm(pvAlarm))
{
testPass("alarm attach");
// example how to set an alarm
Alarm alarm;
alarm.setStatus(deviceStatus);
alarm.setSeverity(minorAlarm);
alarm.setMessage("simulation alarm");
pvAlarm.set(alarm);
}
else
testFail("alarm attach fail");
//
// set descriptor
//
ntHistogram->getDescriptor()->put("This is a test NTHistogram");
// dump NTHistogram
std::cout << *ntHistogram->getPVStructure() << std::endl;
}
void test_nttable()
{
testDiag("test_nttable");
NTTableBuilderPtr builder = NTTable::createBuilder();
testOk(builder.get() != 0, "Got builder");
NTTablePtr ntTable = builder->
addColumn("column0", pvDouble)->
addColumn("column1", pvString)->
addColumn("column2", pvInt)->
addDescriptor()->
addAlarm()->
addTimeStamp()->
create();
testOk1(ntTable.get() != 0);
testOk1(ntTable->getPVStructure().get() != 0);
testOk1(ntTable->getDescriptor().get() != 0);
testOk1(ntTable->getAlarm().get() != 0);
testOk1(ntTable->getTimeStamp().get() != 0);
testOk1(ntTable->getLabels().get() != 0);
testOk1(ntTable->getColumn<PVDoubleArray>("column0").get() != 0);
testOk1(ntTable->getColumn<PVStringArray>("column1").get() != 0);
testOk1(ntTable->getColumn<PVIntArray>("column2").get() != 0);
testOk1(ntTable->getColumn("invalid").get() == 0);
//
// example how to set column values
//
PVIntArray::svector newValues;
newValues.push_back(1);
newValues.push_back(2);
newValues.push_back(8);
PVIntArrayPtr intColumn = ntTable->getColumn<PVIntArray>("column2");
intColumn->replace(freeze(newValues));
//
// example how to get column values
//
PVIntArray::const_svector values(intColumn->view());
testOk1(values.size() == 3);
testOk1(values[0] == 1);
testOk1(values[1] == 2);
testOk1(values[2] == 8);
//
// timeStamp ops
//
PVTimeStamp pvTimeStamp;
if (ntTable->attachTimeStamp(pvTimeStamp))
{
testPass("timeStamp attach");
// example how to set current time
TimeStamp ts;
ts.getCurrent();
pvTimeStamp.set(ts);
// example how to get EPICS time
TimeStamp ts2;
pvTimeStamp.get(ts2);
testOk1(ts2.getEpicsSecondsPastEpoch() != 0);
}
else
testFail("timeStamp attach fail");
//
// alarm ops
//
PVAlarm pvAlarm;
if (ntTable->attachAlarm(pvAlarm))
{
testPass("alarm attach");
// example how to set an alarm
Alarm alarm;
alarm.setStatus(deviceStatus);
alarm.setSeverity(minorAlarm);
alarm.setMessage("simulation alarm");
pvAlarm.set(alarm);
}
else
testFail("alarm attach fail");
//
// set descriptor
//
ntTable->getDescriptor()->put("This is a test NTTable");
// dump NTTable
std::cout << *ntTable->getPVStructure() << std::endl;
}
void test_ntnameValue()
{
testDiag("test_ntnameValue");
NTNameValueBuilderPtr builder = NTNameValue::createBuilder();
testOk(builder.get() != 0, "Got builder");
NTNameValuePtr ntNameValue = builder->
value(pvInt)->
addDescriptor()->
addAlarm()->
addTimeStamp()->
add("extra1",fieldCreate->createScalar(pvString)) ->
add("extra2",fieldCreate->createScalarArray(pvString)) ->
create();
testOk1(ntNameValue.get() != 0);
testOk1(NTNameValue::is_a(ntNameValue->getPVStructure()));
testOk1(NTNameValue::isCompatible(ntNameValue->getPVStructure()));
testOk1(ntNameValue->getPVStructure().get() != 0);
testOk1(ntNameValue->getDescriptor().get() != 0);
testOk1(ntNameValue->getAlarm().get() != 0);
testOk1(ntNameValue->getTimeStamp().get() != 0);
testOk1(ntNameValue->getName().get() != 0);
testOk1(ntNameValue->getValue().get() != 0);
//
// example how to set name
//
PVStringArray::svector newName;
newName.push_back("name1");
newName.push_back("name2");
newName.push_back("name3");
PVStringArrayPtr pvNameField = ntNameValue->getName();
pvNameField->replace(freeze(newName));
//
// example how to get name
//
PVStringArray::const_svector name(pvNameField->view());
testOk1(name.size() == 3);
testOk1(name[0] == "name1");
testOk1(name[1] == "name2");
testOk1(name[2] == "name3");
//
// example how to set value
//
PVIntArray::svector newValue;
newValue.push_back(1);
newValue.push_back(2);
newValue.push_back(8);
PVIntArrayPtr pvValueField = ntNameValue->getValue<PVIntArray>();
pvValueField->replace(freeze(newValue));
//
// example how to get column value
//
PVIntArray::const_svector value(pvValueField->view());
testOk1(value.size() == 3);
testOk1(value[0] == 1);
testOk1(value[1] == 2);
testOk1(value[2] == 8);
//
// timeStamp ops
//
PVTimeStamp pvTimeStamp;
if (ntNameValue->attachTimeStamp(pvTimeStamp))
{
testPass("timeStamp attach");
// example how to set current time
TimeStamp ts;
ts.getCurrent();
pvTimeStamp.set(ts);
// example how to get EPICS time
TimeStamp ts2;
pvTimeStamp.get(ts2);
testOk1(ts2.getEpicsSecondsPastEpoch() != 0);
}
else
testFail("timeStamp attach fail");
//
// alarm ops
//
PVAlarm pvAlarm;
if (ntNameValue->attachAlarm(pvAlarm))
{
testPass("alarm attach");
// example how to set an alarm
Alarm alarm;
alarm.setStatus(deviceStatus);
alarm.setSeverity(minorAlarm);
alarm.setMessage("simulation alarm");
pvAlarm.set(alarm);
}
else
testFail("alarm attach fail");
//
// set descriptor
//
ntNameValue->getDescriptor()->put("This is a test NTNameValue");
// dump NTNameValue
std::cout << *ntNameValue->getPVStructure() << std::endl;
}