Skip to content

Someone101/aleph

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

aleph.
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::


:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:::: quick start

is there an sdcard in it? there should be... then try:

- hold mode switch (square, upper right) while powering up to launch the bootloader [*]

- load an avr32 application from hex, in /hex folder on sdcard

- the unit should now reset and launch the chosen application. 

use usb cable and minicom/kermit to connect to aleph device port and get debug messages. 

currently using baudrate 500000 and a device spelled something like /dev/ttyACM0. [**] 

hints: 
sudo stty -F /dev/ttyACM0 500000
minicom -s
(serial port setup; then 'E' for bps; then 'a' until you see 500000; then 'f' OFF )


[*] for the "green sandwich" proto, mode switch is broken, bootloader toggle is SW4.


[**] for the "green sandwich" proto, the device is called /dev/ttyUSBx on linux, looks like FTDI,
and you may need to lower the baudrate.

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:::: device description

----------------------------
------ hardware:

aleph contains two processors:

1.	atmel AVR32 A0512.
	handles screen, encoders, panel switches, footswitches, USB, I2C, sdcard, and CV input.

2.	analog devices blackfin bf533.
	handles audio I/O, DSP processing, and CV output.

let's nickname these two processors the "controller" and the "dsp," respectively.

the controller is booted from internal flash memory.
it is connected to the dsp by an SPI bus (a fast, 3-wire serial protocol.)
to run a given audio program, the controller resets the dsp and sends a bootable binary image (.ldr) over the SPI bus.
with the dsp running, the same SPI bus carries parameter changes.

audio programs share a common format and protocol, much like an Audio Unit or VST plugin in software. 
each has a number of settable parameters, and metadata/descriptors for each.

the controller has a custom bootloader, which runs when a certain key combination is detected at powerup.
this bootloader is capable of flashing the internal memory with a new executable binary (.elf)


----------------------------------
---- software:

aleph will ship with a controller application called BEES. 
this is a relatively large and complex program designed to be as general-purpose as possible. 
it can arbitrarily and dynamically route and process control rate input, mangage multiple audio modules, 
store and recall configurations from sdcard.

but for some users and applications, it may make more sense to use or develop a single-purpose application 
(e.g. a loop pedal, monosynth, or some exotic experiment.) 
to encourage this kind of work, we will try to provide a relatively high-level API 
over the layers of software that communicate most directly with hardware on the avr32.
the app developer will presented with an array of handlers for handling UI or controller input, 
and an variety of functions for sending data to the dsp, to the screen, or to attached digital devices
(such as monomes, laptops, midi devices, and other alephs.)

the dsp side of the aleph presents another area of extendability. 
the different audio modules are similarly simple, 
building on both a hardware-specific firmware layer and a library of abstract fixed-point audio processors.


:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:::: code directory structure

-----------------------
---- controller :

aleph/avr32_lib/src
	contains default low-level routines specific to the Aleph hardware.
	application authors can use these sources, or replace them with their own as desired.

aleph/avr32_lib/asf-x.x.x :
	a copy of the Atmel Software Framework.	
	this contains low-level drivers and utilies provided by Atmel, lightly modified by us.

aleph/apps : 
	contains a number of project directories which define actual functionality for the controller.
	each directory should contain app-specific sources and Makefile.

aleph/apps/bees:
	this is our main control routing/management application.

aleph/common : 
	routines that both the dsp and the controller need to agree on.
	this includes the SPI protocol and fixed-point math routines.

aleph/utils/avr32_boot  : 
	avr32 bootloader and hardware test program.

---------------------
---- dsp :

aleph/bfin_lib/src:	
	low-level sources for audio programs.
	these routines interact with the blackfin hardware directly, 
	and should be changed only with great care to avoid damaging the proces

aleph/modules :
	contains a number of project directories for specific audio modules.
	
aleph/dsp : 
	common audio functions implemented in 32-bit fixed-point,
	(envelopes, filters, buffers, oscillators, etc);
	these should be freely added to as needed by new modules.	
	currently there is no rigid class structure to these things, but we could impose one.

aleph/dsp/null : 
	a clunky little portaudio-based audio wrapper, 
	suitable for preliminary development of new audio modules.



development setup
----------------


clone git repository: 
git clone https://github.com/tehn/aleph.git


------------------
AVR32
-----

for mac:
https://github.com/droparea/avr32-toolchain

for linux:

get the toolchain and header files from atmel.com.

currently the page is here, (but it could move)
http://www.atmel.com/tools/ATMELAVRTOOLCHAINFORLINUX.aspx
you will need to sign up / login.

get the appopriate toolchain release for your architecture, and the latest headers,
now you have 2 files similar to:

avr32-gnu-toolchain-3.4.2.435-linux.any.x86.tar.gz
atmel-headers-6.1.3.1475.zip

GET 32 BIT.

extracting the toolchain archive gives you something like 
avr32-gnu-toolchain-linux_x86/

move/rename this directory however you like and make sure the binaries are in your $PATH

extracting the headers gives you
atmel-headers-6.1.3.1475

move or copy the headers subdirectories avr/ and avr32/ to the avr32/include/ subdirectory of the toolchain location.
no, i have no idea why atmel chose to do it this way!

here is an example of the whole process:


cd ~/Downloads

tar -xzf avr32-gnu-toolchain-3.4.2.435-linux.any.x86.tar.gz
unzip atmel-headers-6.1.3.1475.zip

mv avr32-gnu-toolchain-linux_x86 ~/avr32-gnu-toolchain
echo "PATH="\$PATH:~/avr32-gnu-toolchain/bin" >> ~/.bashrc
PATH=$PATH:~/avr32-gnu-toolchain/bin

cd atmel-headers-6.1.3.1475
cp avr/ ~/avr32-gnu-toolchain/avr32/include -R
cp avr32/ ~/avr32-gnu-toolchain/avr32/include/ -R

you should now be able to run 'make' from aleph/apps/bees and produce aleph-bees.hex. yeah!
let me know if there are problems: emb@catfact.net


--------------
BLACKFIN
-----

general instructions are here:
http://blackfin.uclinux.org/doku.php?id=toolchain:installing

we are only building standalone binaries (no uclinux), so only the bfin-elf-gcc toolchain is needed. 

get the most recent stable release for your architecture (2012-RC2 as of this writing), unpack it and add the binaries to your path. 

example: 
visit: http://sourceforge.net/projects/adi-toolchain/files/2012R2/2012R2-RC2/i386/blackfin-toolchain-elf-gcc-4.3-2012R2-RC2.i386.tar.bz2/download

:> cd ~/Downloads [or wherever]
:> su [probably]
:> mv blackfin-toolchain-elf-gcc-4.3-2012R2-RC2.i386.tar.bz2 /
:> cd /
:> tar -xjvf blackfin-toolchain-elf-gcc-4.3-2012R2-RC2.i386.tar.bz2
:> export PATH=$PATH:/opt/uClinux/bfin-elf/bin

the toolchain will be extracted to ./opt/uClinux by default.
of course you can use a different location if you like.
you probably also want to add the path to your .bashrc or whatever.

you should now be able to run 'make' from aleph/modules/lines or any other module.

About

open source sound computer

Resources

License

Stars

Watchers

Forks

Packages

No packages published