//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing 
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain(HINSTANCE /*hInstance*/, HINSTANCE /*hPrevInstance*/, LPWSTR /*lpCmdLine*/, INT /*nCmdShow*/)
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag(_CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF);
#endif

    // Set DXUT callbacks
    DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
    DXUTSetCallbackMsgProc(MsgProc);
    DXUTSetCallbackKeyboard(OnKeyboard);
    DXUTSetCallbackFrameMove(OnFrameMove);

    DXUTSetCallbackD3D11DeviceAcceptable(IsD3D11DeviceAcceptable);
    DXUTSetCallbackD3D11DeviceCreated(OnD3D11CreateDevice);
    DXUTSetCallbackD3D11SwapChainResized(OnD3D11ResizedSwapChain);
    DXUTSetCallbackD3D11FrameRender(OnD3D11FrameRender);
    DXUTSetCallbackD3D11SwapChainReleasing(OnD3D11ReleasingSwapChain);
    DXUTSetCallbackD3D11DeviceDestroyed(OnD3D11DestroyDevice);
    InitApp();

    DXUTInit(true, true, NULL); // Parse the command line, show msgboxes on error, no extra command line params

    DXUTSetCursorSettings(true, true); // Show the cursor and clip it when in full screen
    DXUTCreateWindow(L"CascadedShadowDepthMap");
    CWaitDlg CompilingShadersDlg;
    if (DXUT_EnsureD3D11APIs())
        CompilingShadersDlg.ShowDialog(L"Compiling Shaders and loading models.");
    DXUTCreateDevice(D3D_FEATURE_LEVEL_10_0, true, 800, 600);
    CompilingShadersDlg.DestroyDialog();
    DXUTMainLoop(); // Enter into the DXUT render loop

    return DXUTGetExitCode();
}
Пример #2
0
INT WINAPI wWinMain( HINSTANCE, HINSTANCE, LPWSTR, int ) {
	d3d_engine = new D3DEngine();

	 // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

    // DXUT will create and use the best device (either D3D9 or D3D10) 
    // that is available on the system depending on which D3D callbacks are set below

    // Set DXUT callbacks
    DXUTSetCallbackD3D10DeviceAcceptable( IsD3D10DeviceAcceptable );
    DXUTSetCallbackD3D10DeviceCreated( OnD3D10CreateDevice );
    DXUTSetCallbackD3D10SwapChainResized( OnD3D10ResizedSwapChain );
    DXUTSetCallbackD3D10SwapChainReleasing( OnD3D10ReleasingSwapChain );
    DXUTSetCallbackD3D10DeviceDestroyed( OnD3D10DestroyDevice );
    DXUTSetCallbackD3D10FrameRender( OnD3D10FrameRender );

    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackKeyboard( OnKeyboard );
    DXUTSetCallbackFrameMove( OnFrameMove );
    DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );

    DXUTInit(true, true, NULL); // DXUTを初期化(詳しくはMSDN)
    DXUTSetCursorSettings(true, true); // カーソルを表示し、全画面の時には、領域からはみ出ないようにします
	DXUTCreateWindow(kWindowTitle);
    DXUTCreateDevice(true, kWindowWidth, kWindowHeight);
    DXUTMainLoop(); // DXUTのレンダリングループを開始

    return DXUTGetExitCode();
}
Пример #3
0
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing 
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

    DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackKeyboard( KeyboardProc );
    DXUTSetCallbackFrameMove( OnFrameMove );

    DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
    DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
    DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
    DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );
    DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
    DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );

    InitApp();

    DXUTInit( true, true );                 // Use this line instead to try to create a hardware device

    DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
    DXUTCreateWindow( L"AdaptiveTessellationCS40" );
    DXUTCreateDevice(D3D_FEATURE_LEVEL_10_0, true, 1024, 768 );
    DXUTMainLoop(); // Enter into the DXUT render loop

    return DXUTGetExitCode();
}
Пример #4
0
int WINAPI wWinMain( _In_ HINSTANCE hInstance, _In_opt_ HINSTANCE hPrevInstance, _In_ LPWSTR lpCmdLine, _In_ int nCmdShow )
{
    // 디바이스 생성후 삭제를 안하면, 경고
#ifdef _DEBUG
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

	// 업데이트
	DXUTSetCallbackFrameMove(OnFrameMove);
	// 키보드
	//DXUTSetCallbackKeyboard();
	// 메시지 프로시져
	DXUTSetCallbackMsgProc(MsgProc);


	DXUTSetCallbackD3D11DeviceCreated(OnD3D11DeviceCreated);
	// 화면 크기 변환, 이동 , 전환 호출되는 함수
	DXUTSetCallbackD3D11SwapChainResized(OnD3D11ResizedSwapChain);
	DXUTSetCallbackD3D11FrameRender(OnD3D11FrameRender);
	// 화면 크기 변환, 이동 , 전환 호출되는 함수
	DXUTSetCallbackD3D11SwapChainReleasing(OnD3D11ReleasingSwapChain);
	DXUTSetCallbackD3D11DeviceDestroyed(OnD3D11DeviceDestroyed);
    

    DXUTInit( true, true, nullptr );
    DXUTSetCursorSettings( true, true );
    DXUTCreateWindow( L"006 MD5Mesh" );
    DXUTCreateDevice( D3D_FEATURE_LEVEL_10_0, true, 800, 600 );
    DXUTMainLoop();
	
    return DXUTGetExitCode();
}
Пример #5
0
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing 
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
INT WINAPI wWinMain( HINSTANCE, HINSTANCE, LPWSTR, int )
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

    // DXUT will create and use the best device (either D3D9 or D3D10) 
    // that is available on the system depending on which D3D callbacks are set below

    // Set DXUT callbacks
    DXUTSetCallbackD3D9DeviceAcceptable( IsDeviceAcceptable );
    DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
    DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
    DXUTSetCallbackD3D9FrameRender( OnFrameRender );
    DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
    DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackKeyboard( KeyboardProc );
    DXUTSetCallbackFrameMove( OnFrameMove );
    DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );

    DXUTSetCursorSettings( true, true );
    InitApp();
    DXUTInit( true, true ); // Parse the command line and show msgboxes
    DXUTSetHotkeyHandling( true, true, true );
    DXUTCreateWindow( L"CompiledEffect" );
    DXUTCreateDevice( true, 640, 480 );
    DXUTMainLoop();

    return DXUTGetExitCode();
}
Пример #6
0
INT WINAPI WinMain( HINSTANCE, HINSTANCE, LPSTR, int )
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

    // Set the callback functions
    DXUTSetCallbackDeviceCreated( OnCreateDevice );
    DXUTSetCallbackDeviceReset( OnResetDevice );
    DXUTSetCallbackDeviceLost( OnLostDevice );
    DXUTSetCallbackDeviceDestroyed( OnDestroyDevice );
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackKeyboard( KeyboardProc );
    DXUTSetCallbackFrameRender( OnFrameRender );
    DXUTSetCallbackFrameMove( OnFrameMove );
   
    // Initialize world matrices
//    D3DXMatrixScaling( &g_mCellWorld, 1.0f, GROUND_Y / 3.0f, 1.0f );

    // Initialize DXUT and create the desired Win32 window and Direct3D device for the application
    DXUTInit( true, true, true ); // Parse the command line, handle the default hotkeys, and show msgboxes
    DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
    DXUTCreateWindow( L"d3dapp" );
	DXUTCreateDevice( D3DADAPTER_DEFAULT, true, 640, 480, IsDeviceAcceptable, ModifyDeviceSettings );

	MyAppInit();
    // Start the render loop
    DXUTMainLoop();

    // TODO: Perform any application-level cleanup here

    return DXUTGetExitCode();
}
Пример #7
0
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing 
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
INT WINAPI WinMain( HINSTANCE, HINSTANCE, LPSTR, int )
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

    // DXUT will create and use the best device (either D3D9 or D3D10) 
    // that is available on the system depending on which D3D callbacks are set below

    // Set DXUT callbacks
    DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackKeyboard( KeyboardProc );
    DXUTSetCallbackFrameMove( OnFrameMove );
    DXUTSetCallbackD3D10DeviceAcceptable( IsD3D10DeviceAcceptable );
    DXUTSetCallbackD3D10DeviceCreated( OnD3D10CreateDevice );
    DXUTSetCallbackD3D10SwapChainResized( OnD3D10SwapChainResized );
    DXUTSetCallbackD3D10SwapChainReleasing( OnD3D10ReleasingSwapChain );
    DXUTSetCallbackD3D10DeviceDestroyed( OnD3D10DestroyDevice );
    DXUTSetCallbackD3D10FrameRender( OnD3D10FrameRender );

    InitApp();
    DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
    DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
    DXUTCreateWindow( L"D3D10 Shader Model 4.0 Workshop: Exercise03" );
    DXUTCreateDevice( true, 800, 600 );
    DXUTMainLoop(); // Enter into the DXUT render loop

    return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing 
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

    // DXUT will create and use the best device (either D3D9 or D3D11) 
    // that is available on the system depending on which D3D callbacks are set below

    // Set DXUT callbacks
    DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackKeyboard( OnKeyboard );
    DXUTSetCallbackFrameMove( OnFrameMove );

    DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
    DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
    DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
    DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );
    DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
    DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );

    InitApp();
    DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
    DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
    DXUTCreateWindow( L"BasicHLSL11" );
    DXUTCreateDevice (D3D_FEATURE_LEVEL_11_0, true, 800, 600 );
    //DXUTCreateDevice(true, 640, 480);
    DXUTMainLoop(); // Enter into the DXUT render loop

    return DXUTGetExitCode();
}
Пример #9
0
INT WINAPI wWinMain(HINSTANCE, HINSTANCE, LPWSTR, int)
{
    DXUTSetCallbackD3D9DeviceAcceptable(IsDeviceAcceptable);
    DXUTSetCallbackD3D9DeviceCreated(OnCreateDevice);
    DXUTSetCallbackD3D9FrameRender(OnFrameRender);
    DXUTSetCallbackD3D9DeviceReset(OnResetDevice);
    DXUTSetCallbackD3D9DeviceLost(OnLostDevice);
    DXUTSetCallbackD3D9DeviceDestroyed(OnDestroyDevice);
    DXUTSetCallbackMsgProc(MsgProc);
    DXUTSetCallbackKeyboard(KeyboardProc);
    DXUTSetCallbackMouse(MouseProc, true);
    DXUTSetCallbackFrameMove(OnFrameMove);
    DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);

    DXUTSetCursorSettings(true, true);

    InitApp();

    DXUTInit();
    DXUTSetHotkeyHandling();
    DXUTCreateWindow(L"NsRenju by Ivan Goremykin");
    DXUTCreateDevice(true, 1024, 768);

    DXUTMainLoop();

    return DXUTGetExitCode();
}
// main 함수 임
INT WINAPI wWinMain( HINSTANCE, HINSTANCE, LPWSTR, int )
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

    DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
    DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
    DXUTSetCallbackD3D9FrameRender( OnFrameRender );
	
	//focus를 상실했을 때. 즉 창모드/전체화면 모드 변경시 처리 과정
    DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
    DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
    DXUTSetCallbackMsgProc( MsgProc );

	//update 역할, 렌더 직전에 변경사항 적용하는 부분
	DXUTSetCallbackFrameMove( OnFrameMove );

	//조명 초기화
    InitApp();

	//키보드 단축키를 받아 처리하도록 하는 플래그 설정 함수
	DXUTSetHotkeyHandling( true, true, true );

    DXUTCreateWindow( L"BasicHLSL" );
    DXUTCreateDevice( true, 640, 480 );

	// main 무한 루프
	// 무한 루프 중 세팅되는 값들을 적용해 화면에 표시함
    DXUTMainLoop();


    return DXUTGetExitCode();
}
Пример #11
0
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing 
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, 
                     LPWSTR lpCmdLine, int nCmdShow )
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

    // Disable gamma correction on this sample
    DXUTSetIsInGammaCorrectMode( false );

    DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackFrameMove( OnFrameMove );
    DXUTSetCallbackMouse( MouseProc );
    DXUTSetCallbackKeyboard( OnKeyboard );

    DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
    DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
    DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
    DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );
    DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
    DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );

    InitApp();
    
    DXUTInit( true, true );

    DXUTSetCursorSettings( true, true );// Show the cursor and clip when in full screen
    DXUTCreateWindow( L"Contact Hardening Shadows - Direct3D 11" );
    DXUTCreateDevice( D3D_FEATURE_LEVEL_11_0, true, 800, 600 );
    DXUTMainLoop();                         // Enter into the DXUT render loop

    return DXUTGetExitCode();
}
Пример #12
0
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing 
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain(HINSTANCE /*hInstance*/, HINSTANCE /*hPrevInstance*/, LPWSTR /*lpCmdLine*/, int /*nCmdShow*/)
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag(_CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF);
#endif

    // Disable gamma correction on this sample
    DXUTSetIsInGammaCorrectMode(false);

    DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
    DXUTSetCallbackMsgProc(MsgProc);
    DXUTSetCallbackFrameMove(OnFrameMove);

    DXUTSetCallbackD3D11DeviceAcceptable(IsD3D11DeviceAcceptable);
    DXUTSetCallbackD3D11DeviceCreated(OnD3D11CreateDevice);
    DXUTSetCallbackD3D11SwapChainResized(OnD3D11ResizedSwapChain);
    DXUTSetCallbackD3D11FrameRender(OnD3D11FrameRender);
    DXUTSetCallbackD3D11SwapChainReleasing(OnD3D11ReleasingSwapChain);
    DXUTSetCallbackD3D11DeviceDestroyed(OnD3D11DestroyDevice);

    InitApp();

    // Force create a ref device so that feature level D3D_FEATURE_LEVEL_11_0 is guaranteed
    DXUTInit(true, true, NULL); // Parse the command line, show msgboxes on error
    DXUTSetCursorSettings(true, true); // Show the cursor and clip it when in full screen
    DXUTCreateWindow(L"OIT11");
    DXUTCreateDevice(D3D_FEATURE_LEVEL_11_0, true, g_nFrameWidth, g_nFrameHeight);
    DXUTMainLoop(); // Enter into the DXUT render loop

    return DXUTGetExitCode();
}
Пример #13
0
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
INT WINAPI WinMain( HINSTANCE, HINSTANCE, LPSTR, int )
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

	DXUTCreateState();
//	onexit(DeleteDXUTState);

	DXUTSetCallbackMsgProc(MsgProc);
	// DXUTSetCallbackKeyboard(OnKeyboard);
	DXUTSetCallbackFrameMove(OnFrameMove);
	DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
	// DXUTSetCallbackShutdown(ExitApp);

    // Set the callback functions
	DXUTSetCallbackD3D9DeviceAcceptable(IsDeviceAcceptable);
    DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
    DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
    DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
    DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
    DXUTSetCallbackD3D9FrameRender( OnFrameRender );
    
    // TODO: Perform any application-level initialization here
	WCHAR buffer[MAX_PATH];
	GetCurrentDirectory(MAX_PATH, buffer);
	SetCurrentDirectory(L"Resources\\map0\\");
	GetCurrentDirectory(MAX_PATH, buffer);

	g_pTerrain = TerrainPager::Create("major", 272);	// 272 = 16 * 16 + 16
	g_pDFRWindow = new DoubleFrustumRectangle(*g_pTerrain);

    // Initialize DXUT and create the desired Win32 window and Direct3D device for the application
    DXUTInit( true, true, nullptr ); // Parse the command line, handle the default hotkeys, and show msgboxes
    DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
    DXUTCreateWindow( L"TerrainPaging" );
    DXUTCreateDevice( true, 640, 480 );

    // Start the render loop
    DXUTMainLoop();

	int exit_code = DXUTGetExitCode();
	DXUTDestroyState();

    // TODO: Perform any application-level cleanup here
	if(NULL != g_pDFRWindow)
	{
		delete g_pDFRWindow;
		g_pDFRWindow = NULL;
	}
	
	if(NULL != g_pTerrain)
	{
		delete g_pTerrain;
		g_pTerrain = NULL;
	}

    return exit_code;
}
Пример #14
0
//入口
INT WINAPI WinMain( HINSTANCE, HINSTANCE, LPSTR, int )
{
//各种相应函数
    DXUTSetCallbackDeviceCreated( OnCreateDevice );
    DXUTSetCallbackDeviceReset( OnResetDevice );
    DXUTSetCallbackDeviceLost( OnLostDevice );
    DXUTSetCallbackDeviceDestroyed( OnDestroyDevice );
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackKeyboard( KeyboardProc );
    DXUTSetCallbackFrameRender( OnFrameRender );
    DXUTSetCallbackFrameMove( OnFrameMove );


    DXUTSetCursorSettings( true, true );

    InitApp();

    // 创建 窗口
    DXUTInit( true, true, true ); 
    DXUTCreateWindow( L"Water Drop" );
    DXUTCreateDevice( D3DADAPTER_DEFAULT, true, 700, 700, IsDeviceAcceptable, ModifyDeviceSettings );
	//由于最大化会造成形变,这里我们禁用最大化
	HWND hWnd=GetActiveWindow();
	LONG   style=GetWindowLong(hWnd,GWL_STYLE); 
    style   &=~(WS_MAXIMIZEBOX);              
    SetWindowLong(hWnd,GWL_STYLE,style);
    DXUTMainLoop();
    return DXUTGetExitCode();
}
Пример #15
0
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing 
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

	// _crtBreakAlloc	=	862;
    // DXUT will create and use the best device (either D3D9 or D3D10) 
    // that is available on the system depending on which D3D callbacks are set below

    // Set DXUT callbacks
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackKeyboard( OnKeyboard );
    DXUTSetCallbackFrameMove( OnFrameMove );
    DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );

    DXUTSetCallbackD3D9DeviceAcceptable( IsD3D9DeviceAcceptable );
    DXUTSetCallbackD3D9DeviceCreated( OnD3D9CreateDevice );
    DXUTSetCallbackD3D9DeviceReset( OnD3D9ResetDevice );
    DXUTSetCallbackD3D9DeviceLost( OnD3D9LostDevice );
    DXUTSetCallbackD3D9DeviceDestroyed( OnD3D9DestroyDevice );
    DXUTSetCallbackD3D9FrameRender( OnD3D9FrameRender );

    InitApp();
    DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
    DXUTSetCursorSettings( true, true );
    DXUTCreateWindow( L"SimpleSample" );
    DXUTCreateDevice( true, g_nWinSizeX, g_nWinSizeY);
    DXUTMainLoop(); // Enter into the DXUT render loop


    return DXUTGetExitCode();
}
Пример #16
0
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
INT WINAPI wWinMain( HINSTANCE, HINSTANCE, LPWSTR, int )
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

    // Set the callback functions
    DXUTSetCallbackD3D9DeviceAcceptable( IsD3D9DeviceAcceptable );
    DXUTSetCallbackD3D9DeviceCreated( OnD3D9CreateDevice );
    DXUTSetCallbackD3D9DeviceReset( OnD3D9ResetDevice );
    DXUTSetCallbackD3D9FrameRender( OnD3D9FrameRender );
    DXUTSetCallbackD3D9DeviceLost( OnD3D9LostDevice );
    DXUTSetCallbackD3D9DeviceDestroyed( OnD3D9DestroyDevice );
    DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackFrameMove( OnFrameMove );

    // TODO: Perform any application-level initialization here

    // Initialize DXUT and create the desired Win32 window and Direct3D device for the application
    DXUTInit( true, true ); // Parse the command line and show msgboxes
    DXUTSetHotkeyHandling( true, true, true );  // handle the default hotkeys
    DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
    DXUTCreateWindow( L"Game" );
    DXUTCreateDevice( true, 800, 600 );

    // Start the render loop
    DXUTMainLoop();

    // TODO: Perform any application-level cleanup here

    return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
INT WINAPI wWinMain( HINSTANCE, HINSTANCE, LPWSTR lpCmdLine, int nShowCmd)
{
	wchar_t executableFullPath[MAX_PATH];
	GetModuleFileName( NULL, executableFullPath, MAX_PATH );

	wchar_t executableDrive[MAX_PATH];
	wchar_t executableDir[MAX_PATH];
	_wsplitpath_s(executableFullPath, executableDrive, MAX_PATH, executableDir, MAX_PATH, 0, 0, 0, 0);

	wchar_t currentDir[MAX_PATH] = { L'\0' };
	wcscat_s(currentDir, executableDrive);
	wcscat_s(currentDir, executableDir);
	wcscat_s(currentDir, L"..\\");

	BOOL result = SetCurrentDirectory(currentDir);
	ASSERT(result != FALSE, "Can't change current directory.");

	// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
	_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

	// Set the callback functions
	DXUTSetCallbackD3D9DeviceAcceptable( IsD3D9DeviceAcceptable );
	DXUTSetCallbackD3D9DeviceCreated( OnD3D9CreateDevice );
	DXUTSetCallbackD3D9DeviceReset( OnD3D9ResetDevice );
	DXUTSetCallbackD3D9FrameRender( OnD3D9FrameRender );
	DXUTSetCallbackD3D9DeviceLost( OnD3D9LostDevice );
	DXUTSetCallbackD3D9DeviceDestroyed( OnD3D9DestroyDevice );
	DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
	DXUTSetCallbackMsgProc( MsgProc );
	DXUTSetCallbackFrameMove( OnFrameMove );

	// Initialize DXUT and create the desired Win32 window and Direct3D device for the application
	
	// Parse the command line and show msgboxes
	DXUTInit( true, true );
	
	// Handle the default hotkeys
	DXUTSetHotkeyHandling( true, true, true );
	
	// Show the cursor and clip it when in full screen
	DXUTSetCursorSettings( true, true ); 

	DXUTCreateWindow(L"GPU Pro 5 : 'Quaternions revisited'");
	DXUTCreateDevice(true, 1280, 720);

	// Start the render loop
	DXUTMainLoop();

	return DXUTGetExitCode();
}
Пример #18
0
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
INT WINAPI WinMain( HINSTANCE, HINSTANCE, LPSTR, int )
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

    // Set the callback functions. These functions allow DXUT to notify
    // the application about device changes, user input, and windows messages.  The
    // callbacks are optional so you need only set callbacks for events you're interested
    // in. However, if you don't handle the device reset/lost callbacks then the sample
    // framework won't be able to reset your device since the application must first
    // release all device resources before resetting.  Likewise, if you don't handle the
    // device created/destroyed callbacks then DXUT won't be able to
    // recreate your device resources.
    DXUTSetCallbackD3D9DeviceAcceptable( IsDeviceAcceptable );
	DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
    DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
    DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
    DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackKeyboard( KeyboardProc );
    DXUTSetCallbackD3D9FrameRender( OnFrameRender );
    DXUTSetCallbackFrameMove( OnFrameMove );

    // Show the cursor and clip it when in full screen
    DXUTSetCursorSettings( true, true );

    if (InitApp())
	{

        // Initialize DXUT and create the desired Win32 window and Direct3D
        // device for the application. Calling each of these functions is optional, but they
        // allow you to set several options which control the behavior of the framework.
        DXUTInit( true, true ); // Parse the command line, handle the default hotkeys, and show msgboxes
        DXUTCreateWindow( L"UWGame" );
        g_Sound.Initialize( DXUTGetHWND(), DSSCL_PRIORITY );
        
        DXUTCreateDevice( true, 800, 600 );

        // Pass control to DXUT for handling the message pump and
        // dispatching render calls. DXUT will call your FrameMove
        // and FrameRender callback when there is idle time between handling window messages.
        DXUTMainLoop();

        CleanupApp();
	}

    return DXUTGetExitCode();
}
Пример #19
0
INT WINAPI wWinMain( HINSTANCE, HINSTANCE, LPWSTR, int )
{
    HRESULT hr = S_OK;

    
	#if defined(DEBUG) | defined(_DEBUG)
		_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
	#endif

	DXUTSetCallbackD3D9DeviceAcceptable( IsDeviceAcceptable );
    DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
    DXUTSetCallbackD3D9FrameRender( OnFrameRender );
    DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
    DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
    DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackFrameMove( OnFrameMove );
    DXUTSetCallbackKeyboard( KeyboardProc );
    DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );

    
	
	DXUTSetCursorSettings( false, true );
    DXUTInit( true, true ); 
    DXUTSetHotkeyHandling( false, false, false );

    
	
	
	InitApp();


    hr = PrepareAudio();
    if( FAILED( hr ) )
    {
        OutputDebugString( L"PrepareAudio() failed.  Disabling audio support\n" );
    }

    
	DXUTCreateWindow( L"Buser Stima" );
    DXUTCreateDevice( false, 0, 0 );


    
	DXUTMainLoop();

    CleanupAudio();

    return DXUTGetExitCode();
}
Пример #20
0
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

    // DXUT will create and use the best device (either D3D9 or D3D11) 
    // that is available on the system depending on which D3D callbacks are set below

    // Set general DXUT callbacks
    DXUTSetCallbackFrameMove( OnFrameMove );
    DXUTSetCallbackKeyboard( OnKeyboard );
    DXUTSetCallbackMouse( OnMouse );
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
    DXUTSetCallbackDeviceRemoved( OnDeviceRemoved );

    // Set the D3D9 DXUT callbacks. Remove these sets if the app doesn't need to support D3D9
    DXUTSetCallbackD3D9DeviceAcceptable( IsD3D9DeviceAcceptable );
    DXUTSetCallbackD3D9DeviceCreated( OnD3D9CreateDevice );
    DXUTSetCallbackD3D9DeviceReset( OnD3D9ResetDevice );
    DXUTSetCallbackD3D9FrameRender( OnD3D9FrameRender );
    DXUTSetCallbackD3D9DeviceLost( OnD3D9LostDevice );
    DXUTSetCallbackD3D9DeviceDestroyed( OnD3D9DestroyDevice );

    // Set the D3D11 DXUT callbacks. Remove these sets if the app doesn't need to support D3D11
    DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
    DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
    DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
    DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );
    DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
    DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );

    // Perform any application-level initialization here

    DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
    DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
    DXUTCreateWindow( L"Awe Engine" );

    // Only require 10-level hardware
    DXUTCreateDevice( D3D_FEATURE_LEVEL_10_0, true, 640, 480 );
    DXUTMainLoop(); // Enter into the DXUT ren  der loop

    // Perform any application-level cleanup here

    return DXUTGetExitCode();
}
Пример #21
0
//--------------------------------------------------------------------------------------
// Initialization
//--------------------------------------------------------------------------------------
void InitializeDirectX( )
{
	DXUTSetCallbackD3D11DeviceCreated( OnCreateDevice );
	DXUTSetCallbackD3D11FrameRender( OnFrameRender );
	DXUTSetCallbackD3D11DeviceDestroyed( OnDestroyDevice );
	DXUTSetCallbackD3D11SwapChainResized( OnResizedSwapChain );
	DXUTSetCallbackMsgProc( MsgProc );
	DXUTSetCallbackFrameMove( OnFrameMove );

	DXUTSetCursorSettings( true, true );

	InitApp();

	DXUTInit( true, true );
	DXUTCreateWindow( L"CS391: Project 3" );
	DXUTCreateDevice( D3D_FEATURE_LEVEL_10_0, true, 640, 480 );
}
Пример #22
0
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

    // DXUT will create and use the best device (either D3D9 or D3D10) 
    // that is available on the system depending on which D3D callbacks are set below

    // Set general DXUT callbacks
    DXUTSetCallbackFrameMove( OnFrameMove );
    DXUTSetCallbackKeyboard( OnKeyboard );
    DXUTSetCallbackMouse( OnMouse );
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
    DXUTSetCallbackDeviceRemoved( OnDeviceRemoved );

    // Set the D3D9 DXUT callbacks. Remove these sets if the app doesn't need to support D3D9
    DXUTSetCallbackD3D9DeviceAcceptable( IsD3D9DeviceAcceptable );
    DXUTSetCallbackD3D9DeviceCreated( OnD3D9CreateDevice );
    DXUTSetCallbackD3D9DeviceReset( OnD3D9ResetDevice );
    DXUTSetCallbackD3D9FrameRender( OnD3D9FrameRender );
    DXUTSetCallbackD3D9DeviceLost( OnD3D9LostDevice );
    DXUTSetCallbackD3D9DeviceDestroyed( OnD3D9DestroyDevice );

    // Perform any application-level initialization here

	// Setup Video
	VideoSetup setup(1024,720);
	setup.isWindowed = true;

	// Rename Game Title
	g_strGameTitle = L"MyGame";

    DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
    DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
	//HICON hIcon = (HICON)LoadImage(NULL, L"..\..\resources\WindowIcon.ico", IMAGE_ICON, 32, 32, LR_LOADFROMFILE);
	DXUTCreateWindow(g_strGameTitle);
	DXUTCreateDevice(setup.isWindowed, setup.height, setup.witdh);
    DXUTMainLoop(); // Enter into the DXUT render loop

    // Perform any application-level cleanup here

    return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing 
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF | _CRTDBG_CHECK_ALWAYS_DF );
#endif

    // DXUT will create and use the best device (either D3D9 or D3D11) 
    // that is available on the system depending on which D3D callbacks are set below

    // Set DXUT callbacks
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackKeyboard( OnKeyboard );
    DXUTSetCallbackMouse( OnMouse, true );
    DXUTSetCallbackFrameMove( OnFrameMove );
    DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );

    DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
    DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
    DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
    DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
    DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );
    DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );

    InitApp();
    DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
    DXUTSetCursorSettings( true, true );

    WCHAR strWindowTitle[128] = L"TiledResources11";
#ifdef _DEBUG
    wcscat_s( strWindowTitle, L" [DEBUG]" );
#endif

    DXUTCreateWindow( strWindowTitle );

    // set the update & render thread to the first hardware thread
    SetThreadAffinityMask( GetCurrentThread(), 0x1 );

    // Only require 10-level hardware, change to D3D_FEATURE_LEVEL_11_0 to require 11-class hardware
    // Switch to D3D_FEATURE_LEVEL_9_x for 10level9 hardware
    DXUTCreateDevice( D3D_FEATURE_LEVEL_10_0, true, 1280, 720 );

    DXUTMainLoop(); // Enter into the DXUT render loop

    return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
int WINAPI wWinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow)
{
    HRESULT hr;
    V_RETURN(DXUTSetMediaSearchPath(MEDIA_PATH));

    // Enable run-time memory check for debug builds.
#if defined(DEBUG)
    _CrtSetDbgFlag(_CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF);
#endif

    // Set general DXUT callbacks
    DXUTSetCallbackFrameMove(OnFrameMove);
    DXUTSetCallbackKeyboard(OnKeyboard);
    DXUTSetCallbackMouse(OnMouse);
    DXUTSetCallbackMsgProc(MsgProc);
    DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
    DXUTSetCallbackDeviceRemoved(OnDeviceRemoved);

    // Set the D3D11 DXUT callbacks
    DXUTSetCallbackD3D11DeviceAcceptable  (IsD3D11DeviceAcceptable);
    DXUTSetCallbackD3D11DeviceCreated     (OnD3D11CreateDevice);
    DXUTSetCallbackD3D11SwapChainResized  (OnD3D11ResizedSwapChain);
    DXUTSetCallbackD3D11FrameRender       (OnD3D11FrameRender);
    DXUTSetCallbackD3D11SwapChainReleasing(OnD3D11ReleasingSwapChain);
    DXUTSetCallbackD3D11DeviceDestroyed   (OnD3D11DestroyDevice);

    // Perform any application-level initialization here
    InitAOParams(g_AOParams);
    InitGUI();

    UINT Width = 1920;
    UINT Height = 1200;

    DXUTInit(true, true, NULL); // Parse the command line, show msgboxes on error, no extra command line params
    DXUTSetCursorSettings(true, true); // Show the cursor and clip it when in full screen
    DXUTSetIsInGammaCorrectMode(false); // Do not use a SRGB back buffer for this sample
    DXUTCreateWindow(L"Deinterleaved Texturing");
    DXUTCreateDevice(D3D_FEATURE_LEVEL_11_0, true, Width, Height);
    //DXUTToggleFullScreen();

    DXUTMainLoop(); // Enter into the DXUT render loop

    // Perform any application-level cleanup here

    return DXUTGetExitCode();
}
Пример #25
0
void Init_DXUT( const wchar_t* const strWindowTitle, UINT iWidth, UINT iHeight )
{
    // Set DXUT callbacks
    DXUTSetCallbackD3D9DeviceAcceptable( IsDeviceAcceptable );
    DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
    DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
    DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
    DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackFrameMove( OnFrameMove );

    DXUTSetCursorSettings( true, true );
    DXUTInit( true, true ); // Parse the command line and show msgboxes
    DXUTSetHotkeyHandling( false, true, true );
    DXUTCreateWindow( strWindowTitle );
    DXUTCreateDevice( true, iWidth, iHeight );
}
Пример #26
0
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing 
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

    // DXUT will create and use the best device (either D3D9 or D3D10) 
    // that is available on the system depending on which D3D callbacks are set below
       //-------------------------------------------------------------------------
       //Initialize test command window
       //-------------------------------------------------------------------------
    RedirectIOToConsole(L"output window");
    // DXUT will create and use the best device (either D3D9 or D3D10) 
    // that is available on the system depending on which D3D callbacks are set below

    // Set DXUT callbacks
    DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackKeyboard( OnKeyboard );
    DXUTSetCallbackFrameMove( OnFrameMove );
    DXUTSetCallbackD3D10DeviceAcceptable( IsD3D10DeviceAcceptable );
    DXUTSetCallbackD3D10DeviceCreated( OnD3D10CreateDevice );
    DXUTSetCallbackD3D10SwapChainResized( OnD3D10SwapChainResized );
    DXUTSetCallbackD3D10FrameRender( OnD3D10FrameRender );
    DXUTSetCallbackD3D10SwapChainReleasing( OnD3D10SwapChainReleasing );
    DXUTSetCallbackD3D10DeviceDestroyed( OnD3D10DestroyDevice );

    HRESULT hr;
    V_RETURN(DXUTSetMediaSearchPath(L"..\\Source\\SoftShadows"));

    InitApp();

    DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
    DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
    DXUTCreateWindow( L"SoftShadows" );
    DXUTCreateDevice( true, 1024, 768 );
    DXUTMainLoop(); // Enter into the DXUT render loop

    return DXUTGetExitCode();
}
Пример #27
0
HRESULT R3D3D::Init( bool isWindows, int width, int height )
{
    DXUTSetCallbackD3D9DeviceAcceptable( IsDeviceAcceptable );
    DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
    DXUTSetCallbackD3D9FrameRender( OnFrameRender );
    DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
    DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
    DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
    DXUTSetCallbackMsgProc( MsgProc );
    DXUTSetCallbackFrameMove( OnFrameMove );
    DXUTSetCallbackKeyboard( KeyboardProc );
    DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );

    DXUTInit( true, true ); // Parse the command line, handle the default hotkeys, and show msgboxes
    DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
    DXUTCreateWindow( L"EmptyProject" );
    DXUTCreateDevice(  isWindows, width, height );
    // Start the render loop
    DXUTMainLoop();
    return DXUTGetExitCode();
}
Пример #28
0
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
INT WINAPI WinMain( HINSTANCE, HINSTANCE, LPSTR, int )
{
    // Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
    _CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif

    // Set the callback functions
    DXUTSetCallbackDeviceCreated( OnCreateDevice );
    DXUTSetCallbackDeviceReset( OnResetDevice );
    DXUTSetCallbackDeviceLost( OnLostDevice );
    DXUTSetCallbackDeviceDestroyed( OnDestroyDevice );
    DXUTSetCallbackMsgProc( MsgProc );    
    DXUTSetCallbackKeyboard( KeyboardProc );
    DXUTSetCallbackMouse( MouseProc );
    DXUTSetCallbackFrameRender( OnFrameRender );
    DXUTSetCallbackFrameMove( OnFrameMove );

    // Initialize DXUT and create the desired Win32 window and Direct3D device for the application
    DXUTInit( true, false, true ); // Parse the command line, handle the default hotkeys, and show msgboxes
    DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
    DXUTCreateWindow( L"Globalization" );
    DXUTCreateDevice( D3DADAPTER_DEFAULT, true, 1024, 768, IsDeviceAcceptable, ModifyDeviceSettings );

    InitApp();

    // Start the render loop
    DXUTMainLoop();

    CleanupApp();

#if defined(DEBUG) || defined(_DEBUG)
    // Functions to pinpoint memory leaks
    // _CrtDumpMemoryLeaks ();
    _CrtCheckMemory();
#endif

    return DXUTGetExitCode();
}
Пример #29
0
void CDirect3DView::OnInitialUpdate()
{
    __super::OnInitialUpdate();

    if (DXUTGetD3D11Device() != NULL)
    {
        return;
    }

    DXUTSetIsInGammaCorrectMode(false);

    // Set general DXUT callbacks
    DXUTSetCallbackFrameMove( OnDXUTFrameMove, this );
    DXUTSetCallbackKeyboard( OnDXUTKeyboard, this );
    DXUTSetCallbackMouse( OnDXUTMouse, true, this );
    DXUTSetCallbackMsgProc( DXUTMsgProc, this );
    DXUTSetCallbackDeviceChanging( DXUTModifyDeviceSettings, this );
    DXUTSetCallbackDeviceRemoved( OnDXUTDeviceRemoved, this );

    // Set the D3D11 DXUT callbacks. Remove these sets if the app doesn't need to support D3D11
    DXUTSetCallbackD3D11DeviceAcceptable( DXUTIsD3D11DeviceAcceptable, this );
    DXUTSetCallbackD3D11DeviceCreated( OnDXUTD3D11CreateDevice, this );
    DXUTSetCallbackD3D11SwapChainResized( OnDXUTD3D11ResizedSwapChain, this );
    DXUTSetCallbackD3D11FrameRender( OnDXUTD3D11FrameRender, this );
    DXUTSetCallbackD3D11SwapChainReleasing( OnDXUTD3D11ReleasingSwapChain, this );
    DXUTSetCallbackD3D11DeviceDestroyed( OnDXUTD3D11DestroyDevice, this );

    DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
    DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen

    // Create DXUT stuff
    DXUTSetWindow( this->GetSafeHwnd(), this->GetSafeHwnd(), this->GetSafeHwnd(), false );
    CRect rect;

    GetClientRect(&rect);

    // Only require 10-level hardware
    DXUTCreateDevice( D3D_FEATURE_LEVEL_10_1, true, rect.right, rect.bottom );
}
Пример #30
0
INT WINAPI wWinMain(HINSTANCE hInstance,HINSTANCE hPrevInstance,LPWSTR lpCmdLine,int nShowCmd)
{

	DXUTSetCallbackD3D10DeviceAcceptable(IsD3D10DeviceAcceptable);
	DXUTSetCallbackD3D10DeviceCreated(OnD3D10CreateDevice);
	DXUTSetCallbackD3D10DeviceDestroyed(OnD3D10DestroyDevice);
	DXUTSetCallbackD3D10FrameRender(OnD3D10FrameRender);
	DXUTSetCallbackD3D10SwapChainReleasing(OnD3D10SwapChainReleasing);
	DXUTSetCallbackD3D10SwapChainResized(OnD3D10SwapChainResized);
	DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
	DXUTSetCallbackFrameMove(OnFrameMove);
	DXUTSetCallbackMsgProc(MsgProc);
	DXUTSetCallbackKeyboard(KeyboardProc);

	initApp();
	V(DXUTInit(true,true));
	V(DXUTCreateWindow(L"CGRambler2.0 华南师范大学 李海全 [email protected]"));
	V(DXUTCreateDevice(true,Width,Height));
	DXUTSetCursorSettings(true,true);
	V(DXUTMainLoop());
	return DXUTGetExitCode();

}