struct msm_handset {
struct input_dev *ipdev;
struct switch_dev sdev;
struct msm_handset_platform_data *hs_pdata;
};
static struct msm_rpc_client *rpc_client;
static struct msm_handset *hs;
#if defined(CONFIG_MACH_R750)
#define MSM_GPIO_GSM_EARPHONE_DETECT 78
typedef enum
{
GPIO_LOW_LEVEL = 0,
GPIO_HIGH_LEVEL = 1
} GPIO_ValueType;
static unsigned modemctl_config_earphonedetect = GPIO_CFG(
MSM_GPIO_GSM_EARPHONE_DETECT, 0, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_2MA);
static int earphone_gpio_init(void)
{
int rc = 0;
/* GSM AT_SW pin */
rc = gpio_tlmm_config(modemctl_config_earphonedetect ,GPIO_ENABLE);
if (rc)
{
printk(KERN_ERR "%s: gpio_tlmm_config(%#x)=%d\n",__func__,
MSM_GPIO_GSM_EARPHONE_DETECT, rc);
return -EIO;
}
rc = gpio_request(MSM_GPIO_GSM_EARPHONE_DETECT, "modemctl");
if(rc)
void sku3_lcdc_lcd_camera_power_init(void)
{
int rc = 0;
u32 socinfo = socinfo_get_platform_type();
/* LDO_EXT2V8 */
if (gpio_request(SKU3_LCDC_LCD_CAMERA_LDO_2V8, "lcd_camera_ldo_2v8")) {
pr_err("failed to request gpio lcd_camera_ldo_2v8\n");
return;
}
rc = gpio_tlmm_config(GPIO_CFG(SKU3_LCDC_LCD_CAMERA_LDO_2V8, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
if (rc < 0) {
pr_err("%s:unable to enable lcd_camera_ldo_2v8!\n", __func__);
goto fail_gpio2;
}
/* LDO_EVT1V8 */
if (socinfo == 0x0B) {
if (gpio_request(SKU3_LCDC_LCD_CAMERA_LDO_1V8,
"lcd_camera_ldo_1v8")) {
pr_err("failed to request gpio lcd_camera_ldo_1v8\n");
goto fail_gpio1;
}
rc = gpio_tlmm_config(GPIO_CFG(SKU3_LCDC_LCD_CAMERA_LDO_1V8, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
if (rc < 0) {
pr_err("%s: unable to enable lcdc_camera_ldo_1v8!\n",
__func__);
goto fail_gpio1;
}
} else if (socinfo == 0x0F || machine_is_msm8625_qrd7()) {
if (gpio_request(SKU3_1_LCDC_LCD_CAMERA_LDO_1V8,
"lcd_camera_ldo_1v8")) {
pr_err("failed to request gpio lcd_camera_ldo_1v8\n");
goto fail_gpio1;
}
rc = gpio_tlmm_config(GPIO_CFG(SKU3_1_LCDC_LCD_CAMERA_LDO_1V8,
0, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
if (rc < 0) {
pr_err("%s: unable to enable lcdc_camera_ldo_1v8!\n",
__func__);
goto fail_gpio1;
}
}
rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_truly_lcdc),
regs_truly_lcdc);
if (rc)
pr_err("%s: could not get regulators: %d\n", __func__, rc);
rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_truly_lcdc),
regs_truly_lcdc);
if (rc)
pr_err("%s: could not set voltages: %d\n", __func__, rc);
return;
fail_gpio1:
if (socinfo == 0x0B)
gpio_free(SKU3_LCDC_LCD_CAMERA_LDO_1V8);
else if (socinfo == 0x0F || machine_is_msm8625_qrd7())
gpio_free(SKU3_1_LCDC_LCD_CAMERA_LDO_1V8);
fail_gpio2:
gpio_free(SKU3_LCDC_LCD_CAMERA_LDO_2V8);
return;
}
static int init_gpios(void){
int ret;
struct gpio_switch_data *p = head;
while(p){
ret = gpio_tlmm_config(GPIO_CFG(p->gpio, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_UP, GPIO_CFG_2MA),GPIO_CFG_ENABLE);
if (ret){
pr_err("Could not configure gpio %d\n", p->gpio);
return -EINVAL;
}
gpio_request(p->gpio , p->name);
if(p->event_mode == PAN_INPUTEVENT){
p->input_dev = input_allocate_device();
if(p->input_dev == NULL){
pr_err("switch_gpio failed to allocate input device\n");
return -ENOMEM;
}
p->input_dev->name = p->name;
set_bit(EV_SW, p->input_dev->evbit);
set_bit(SW_LID, p->input_dev->swbit);
ret = input_register_device(p->input_dev);
if(ret){
pr_err("switch_gpio unable to register %s input device\n", p->input_dev->name);
return -EINVAL;
}
}
else if(p->event_mode == PAN_UEVENT){
p->sdev.print_state = gpio_switch_print_state;
p->sdev.name = p->name;
ret = switch_dev_register(&p->sdev);
if(ret < 0){
pr_err("%s Switch dev register is failed\n" , p->sdev.name);
return -EINVAL;
}
}
else{
pr_err("event_mode : %d does not exist\n" , p->event_mode);
return -EINVAL;
}
p->current_state = gpio_get_value(p->gpio) ^ p->flag;
if(p->event_mode == PAN_INPUTEVENT){
dbg("INPUTEVENT %s sent event : %d\n" , p->name , p->current_state);
input_report_switch(p->input_dev , SW_LID , p->current_state);
input_sync(p->input_dev);
}
else if(p->event_mode == PAN_UEVENT){
dbg("UEVENT %s sent event : %d\n" , p->name , p->current_state);
switch_set_state(&p->sdev , p->current_state);
}
p->last_state = p->current_state;
ret = request_threaded_irq(p->irq , NULL , gpio_switch_irq_handler , IRQF_TRIGGER_FALLING|IRQF_TRIGGER_RISING , p->name , p);
if(ret){
pr_err("%s request_irq is failed reason : %d\n" , p->name , ret);
return -EINVAL;
}
hrtimer_init(&p->timer , CLOCK_MONOTONIC , HRTIMER_MODE_REL);
p->timer.function = gpio_switch_timer_func;
p->debounce = DEBOUNCE_UNKNOWN | DEBOUNCE_WAIT_IRQ;
p->debounce_count = 0;
p->notify = NULL;
p->emergency_notify = NULL;
INIT_WORK(&p->work , gpio_switch_work);
wake_lock_init(&p->wakelock, WAKE_LOCK_SUSPEND, p->name);
enable_irq_wake(p->irq);
p->disabled = false;
p = p->next;
}
return 0;
}
static int max77803_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct max77803_dev *max77803;
struct max77803_platform_data *pdata;
u8 reg_data;
int ret = 0;
dev_info(&i2c->dev, "%s\n", __func__);
max77803 = kzalloc(sizeof(struct max77803_dev), GFP_KERNEL);
if (max77803 == NULL)
return -ENOMEM;
if (i2c->dev.of_node) {
pdata = devm_kzalloc(&i2c->dev,
sizeof(struct max77803_platform_data),
GFP_KERNEL);
if (!pdata) {
dev_err(&i2c->dev, "Failed to allocate memory \n");
ret = -ENOMEM;
goto err;
}
ret = of_max77803_dt(&i2c->dev, pdata);
if (ret < 0){
dev_err(&i2c->dev, "Failed to get device of_node \n");
return ret;
}
/*Filling the platform data*/
pdata->num_regulators = MAX77803_REG_MAX;
pdata->muic_data = &max77803_muic;
pdata->charger_data = &sec_battery_pdata;
pdata->regulators = max77803_regulators,
#ifdef CONFIG_VIBETONZ
pdata->haptic_data = &max77803_haptic_pdata;
#endif
pdata->led_data = &max77803_led_pdata;
/* set irq_base at sec_battery_pdata */
sec_battery_pdata.bat_irq = pdata->irq_base + MAX77803_CHG_IRQ_BATP_I;
/*pdata update to other modules*/
i2c->dev.platform_data = pdata;
} else
pdata = i2c->dev.platform_data;
i2c_set_clientdata(i2c, max77803);
max77803->dev = &i2c->dev;
max77803->i2c = i2c;
max77803->irq = i2c->irq;
// max77803->type = id->driver_data;
if (pdata) {
max77803->irq_base = pdata->irq_base;
max77803->irq_gpio = pdata->irq_gpio;
max77803->wakeup = pdata->wakeup;
gpio_tlmm_config(GPIO_CFG(max77803->irq_gpio, 0, GPIO_CFG_INPUT,
GPIO_CFG_NO_PULL, GPIO_CFG_2MA), GPIO_CFG_DISABLE);
} else {
ret = -EINVAL;
goto err;
}
mutex_init(&max77803->iolock);
if (max77803_read_reg(i2c, MAX77803_PMIC_REG_PMIC_ID2, ®_data) < 0) {
dev_err(max77803->dev,
"device not found on this channel (this is not an error)\n");
ret = -ENODEV;
goto err;
} else {
/* print rev */
max77803->pmic_rev = (reg_data & 0x7);
max77803->pmic_ver = ((reg_data & 0xF8) >> 0x3);
pr_info("%s: device found: rev.0x%x, ver.0x%x\n", __func__,
max77803->pmic_rev, max77803->pmic_ver);
}
#if 0
#if defined(CONFIG_MACH_JF_VZW) || defined(CONFIG_MACH_JF_LGT)
if (kernel_sec_get_debug_level() == KERNEL_SEC_DEBUG_LEVEL_LOW) {
pm8xxx_hard_reset_config(PM8XXX_DISABLE_HARD_RESET);
max77803_write_reg(i2c, MAX77803_PMIC_REG_MAINCTRL1, 0x04);
} else {
pm8xxx_hard_reset_config(PM8XXX_DISABLE_HARD_RESET);
max77803_write_reg(i2c, MAX77803_PMIC_REG_MAINCTRL1, 0x0c);
}
#else
if (kernel_sec_get_debug_level() == KERNEL_SEC_DEBUG_LEVEL_LOW) {
max77803_write_reg(i2c, MAX77803_PMIC_REG_MAINCTRL1, 0x04);
} else {
pm8xxx_hard_reset_config(PM8XXX_DISABLE_HARD_RESET);
max77803_write_reg(i2c, MAX77803_PMIC_REG_MAINCTRL1, 0x0c);
}
#endif
#endif
max77803_update_reg(i2c, MAX77803_CHG_REG_SAFEOUT_CTRL, 0x00, 0x30);
max77803->muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC);
i2c_set_clientdata(max77803->muic, max77803);
max77803->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
i2c_set_clientdata(max77803->haptic, max77803);
ret = max77803_irq_init(max77803);
if (ret < 0)
goto err_irq_init;
ret = mfd_add_devices(max77803->dev, -1, max77803_devs,
ARRAY_SIZE(max77803_devs), NULL, 0);
if (ret < 0)
goto err_mfd;
device_init_wakeup(max77803->dev, pdata->wakeup);
return ret;
err_mfd:
mfd_remove_devices(max77803->dev);
max77803_irq_exit(max77803);
err_irq_init:
i2c_unregister_device(max77803->muic);
i2c_unregister_device(max77803->haptic);
err:
kfree(max77803);
return ret;
}
};
static char lcdc_splash_is_enabled()
{
return mdp_pdata.cont_splash_enabled;
}
#define GPIO_LCDC_BRDG_PD 128
#define GPIO_LCDC_BRDG_RESET_N 129
#define GPIO_LCD_DSI_SEL 125
#define LCDC_RESET_PHYS 0x90008014
static void __iomem *lcdc_reset_ptr;
static unsigned mipi_dsi_gpio[] = {
GPIO_CFG(GPIO_LCDC_BRDG_RESET_N, 0, GPIO_CFG_OUTPUT,
GPIO_CFG_NO_PULL, GPIO_CFG_2MA), /* LCDC_BRDG_RESET_N */
GPIO_CFG(GPIO_LCDC_BRDG_PD, 0, GPIO_CFG_OUTPUT,
GPIO_CFG_NO_PULL, GPIO_CFG_2MA), /* LCDC_BRDG_PD */
};
static unsigned lcd_dsi_sel_gpio[] = {
GPIO_CFG(GPIO_LCD_DSI_SEL, 0, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP,
GPIO_CFG_2MA),
};
enum {
DSI_SINGLE_LANE = 1,
DSI_TWO_LANES,
};
static int msm_fb_get_lane_config(void)
void mdp_config_vsync(struct msm_fb_data_type *mfd)
{
/* vsync on primary lcd only for now */
if ((mfd->dest != DISPLAY_LCD) || (mfd->panel_info.pdest != DISPLAY_1)
|| (!vsync_mode)) {
goto err_handle;
}
#ifndef CONFIG_SHLCDC_BOARD
vsync_clk_status = 0;
#endif /* CONFIG_SHLCDC_BOARD */
if (mfd->panel_info.lcd.vsync_enable) {
mfd->total_porch_lines = mfd->panel_info.lcd.v_back_porch +
mfd->panel_info.lcd.v_front_porch +
mfd->panel_info.lcd.v_pulse_width;
mfd->total_lcd_lines =
mfd->panel_info.yres + mfd->total_porch_lines;
mfd->lcd_ref_usec_time =
100000000 / mfd->panel_info.lcd.refx100;
mfd->vsync_handler_pending = FALSE;
mfd->last_vsync_timetick.tv.sec = 0;
mfd->last_vsync_timetick.tv.nsec = 0;
#ifdef MDP_HW_VSYNC
if (mdp_vsync_clk == NULL)
mdp_vsync_clk = clk_get(NULL, "mdp_vsync_clk");
if (IS_ERR(mdp_vsync_clk)) {
printk(KERN_ERR "error: can't get mdp_vsync_clk!\n");
mfd->use_mdp_vsync = 0;
} else
mfd->use_mdp_vsync = 1;
if (mfd->use_mdp_vsync) {
uint32 vsync_cnt_cfg, vsync_cnt_cfg_dem;
uint32 mdp_vsync_clk_speed_hz;
mdp_vsync_clk_speed_hz = clk_get_rate(mdp_vsync_clk);
if (mdp_vsync_clk_speed_hz == 0) {
mfd->use_mdp_vsync = 0;
} else {
/*
* Do this calculation in 2 steps for
* rounding uint32 properly.
*/
vsync_cnt_cfg_dem =
(mfd->panel_info.lcd.refx100 *
mfd->total_lcd_lines) / 100;
vsync_cnt_cfg =
(mdp_vsync_clk_speed_hz) /
vsync_cnt_cfg_dem;
/* MDP cmd block enable */
mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON,
FALSE);
mdp_hw_vsync_clk_enable(mfd);
mdp_set_sync_cfg_0(mfd, vsync_cnt_cfg);
#ifdef CONFIG_FB_MSM_MDP40
if (mdp_hw_revision < MDP4_REVISION_V2_1)
mdp_set_sync_cfg_1(mfd, vsync_cnt_cfg);
#endif
/*
* load the last line + 1 to be in the
* safety zone
*/
vsync_load_cnt = mfd->panel_info.yres;
/* line counter init value at the next pulse */
MDP_OUTP(MDP_BASE + MDP_PRIM_VSYNC_INIT_VAL,
vsync_load_cnt);
#ifdef CONFIG_FB_MSM_MDP40
if (mdp_hw_revision < MDP4_REVISION_V2_1) {
MDP_OUTP(MDP_BASE +
MDP_SEC_VSYNC_INIT_VAL, vsync_load_cnt);
}
#endif
/*
* external vsync source pulse width and
* polarity flip
*/
MDP_OUTP(MDP_BASE + MDP_PRIM_VSYNC_OUT_CTRL,
BIT(0));
#ifdef CONFIG_FB_MSM_MDP40
if (mdp_hw_revision < MDP4_REVISION_V2_1) {
MDP_OUTP(MDP_BASE +
MDP_SEC_VSYNC_OUT_CTRL, BIT(0));
MDP_OUTP(MDP_BASE +
MDP_VSYNC_SEL, 0x20);
}
#endif
/* threshold */
MDP_OUTP(MDP_BASE + 0x200,
(vsync_above_th << 16) |
(vsync_start_th));
mdp_hw_vsync_clk_disable(mfd);
/* MDP cmd block disable */
mdp_pipe_ctrl(MDP_CMD_BLOCK,
MDP_BLOCK_POWER_OFF, FALSE);
}
}
#else
mfd->use_mdp_vsync = 0;
#ifdef CONFIG_SHLCDC_BOARD
init_waitqueue_head(&mdp_wq_for_vsync);
atomic_set(&mdp_atomic_for_vsync, 0);
hrtimer_init(&vsync_hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
#else
hrtimer_init(&mfd->dma_hrtimer, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
mfd->dma_hrtimer.function = mdp_dma2_vsync_hrtimer_handler;
mfd->vsync_width_boundary = vmalloc(mfd->panel_info.xres * 4);
#endif /*CONFIG_SHLCDC_BOARD*/
#endif
#ifdef CONFIG_FB_MSM_MDDI
mfd->channel_irq = 0;
if (mfd->panel_info.lcd.hw_vsync_mode) {
u32 vsync_gpio = mfd->vsync_gpio;
u32 ret;
if (vsync_gpio == -1) {
MSM_FB_INFO("vsync_gpio not defined!\n");
goto err_handle;
}
ret = gpio_tlmm_config(GPIO_CFG
(vsync_gpio,
(mfd->use_mdp_vsync) ? 1 : 0,
GPIO_CFG_INPUT,
#ifdef CONFIG_SHLCDC_BOARD
GPIO_CFG_NO_PULL,
#else
GPIO_CFG_PULL_DOWN,
#endif
GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
if (ret)
goto err_handle;
/*
* if use_mdp_vsync, then no interrupt need since
* mdp_vsync is feed directly to mdp to reset the
* write pointer counter. therefore no irq_handler
* need to reset write pointer counter.
*/
if (!mfd->use_mdp_vsync) {
mfd->channel_irq = MSM_GPIO_TO_INT(vsync_gpio);
if (request_irq
(mfd->channel_irq,
&mdp_hw_vsync_handler_proxy,
IRQF_TRIGGER_FALLING, "VSYNC_GPIO",
(void *)mfd)) {
MSM_FB_INFO
("irq=%d failed! vsync_gpio=%d\n",
mfd->channel_irq,
vsync_gpio);
goto err_handle;
}
}
}
#endif
#ifndef CONFIG_SHLCDC_BOARD
mdp_hw_vsync_clk_enable(mfd);
mdp_set_vsync((unsigned long)mfd);
#endif /*CONFIG_SHLCDC_BOARD*/
}
return;
err_handle:
if (mfd->vsync_width_boundary)
vfree(mfd->vsync_width_boundary);
mfd->panel_info.lcd.vsync_enable = FALSE;
printk(KERN_ERR "%s: failed!\n", __func__);
}
int dsi_panel_device_register(struct device_node *pan_node,
struct mdss_dsi_ctrl_pdata *ctrl_pdata)
{
struct mipi_panel_info *mipi;
int rc, i, len;
struct device_node *dsi_ctrl_np = NULL;
struct platform_device *ctrl_pdev = NULL;
bool dynamic_fps;
const char *data;
struct mdss_panel_info *pinfo = &(ctrl_pdata->panel_data.panel_info);
mipi = &(pinfo->mipi);
pinfo->type =
((mipi->mode == DSI_VIDEO_MODE)
? MIPI_VIDEO_PANEL : MIPI_CMD_PANEL);
rc = mdss_dsi_clk_div_config(pinfo, mipi->frame_rate);
if (rc) {
pr_err("%s: unable to initialize the clk dividers\n", __func__);
return rc;
}
dsi_ctrl_np = of_parse_phandle(pan_node,
"qcom,mdss-dsi-panel-controller", 0);
if (!dsi_ctrl_np) {
pr_err("%s: Dsi controller node not initialized\n", __func__);
return -EPROBE_DEFER;
}
ctrl_pdev = of_find_device_by_node(dsi_ctrl_np);
rc = mdss_dsi_regulator_init(ctrl_pdev);
if (rc) {
pr_err("%s: failed to init regulator, rc=%d\n",
__func__, rc);
return rc;
}
data = of_get_property(ctrl_pdev->dev.of_node,
"qcom,platform-strength-ctrl", &len);
if ((!data) || (len != 2)) {
pr_err("%s:%d, Unable to read Phy Strength ctrl settings",
__func__, __LINE__);
return -EINVAL;
}
pinfo->mipi.dsi_phy_db.strength[0] = data[0];
pinfo->mipi.dsi_phy_db.strength[1] = data[1];
data = of_get_property(ctrl_pdev->dev.of_node,
"qcom,platform-regulator-settings", &len);
if ((!data) || (len != 7)) {
pr_err("%s:%d, Unable to read Phy regulator settings",
__func__, __LINE__);
return -EINVAL;
}
for (i = 0; i < len; i++) {
pinfo->mipi.dsi_phy_db.regulator[i]
= data[i];
}
data = of_get_property(ctrl_pdev->dev.of_node,
"qcom,platform-bist-ctrl", &len);
if ((!data) || (len != 6)) {
pr_err("%s:%d, Unable to read Phy Bist Ctrl settings",
__func__, __LINE__);
return -EINVAL;
}
for (i = 0; i < len; i++) {
pinfo->mipi.dsi_phy_db.bistctrl[i]
= data[i];
}
data = of_get_property(ctrl_pdev->dev.of_node,
"qcom,platform-lane-config", &len);
if ((!data) || (len != 45)) {
pr_err("%s:%d, Unable to read Phy lane configure settings",
__func__, __LINE__);
return -EINVAL;
}
for (i = 0; i < len; i++) {
pinfo->mipi.dsi_phy_db.lanecfg[i] =
data[i];
}
ctrl_pdata->shared_pdata.broadcast_enable = of_property_read_bool(
pan_node, "qcom,mdss-dsi-panel-broadcast-mode");
dynamic_fps = of_property_read_bool(pan_node,
"qcom,mdss-dsi-pan-enable-dynamic-fps");
if (dynamic_fps) {
pinfo->dynamic_fps = true;
data = of_get_property(pan_node,
"qcom,mdss-dsi-pan-fps-update", NULL);
if (data) {
if (!strcmp(data, "dfps_suspend_resume_mode")) {
pinfo->dfps_update =
DFPS_SUSPEND_RESUME_MODE;
pr_debug("%s: dfps mode: suspend/resume\n",
__func__);
} else if (!strcmp(data,
"dfps_immediate_clk_mode")) {
pinfo->dfps_update =
DFPS_IMMEDIATE_CLK_UPDATE_MODE;
pr_debug("%s: dfps mode: Immediate clk\n",
__func__);
} else if (!strcmp(data,
"dfps_immediate_porch_mode")) {
pinfo->dfps_update =
DFPS_IMMEDIATE_PORCH_UPDATE_MODE;
pr_debug("%s: dfps mode: Immediate porch\n",
__func__);
} else {
pr_debug("%s: dfps to default mode\n",
__func__);
pinfo->dfps_update =
DFPS_SUSPEND_RESUME_MODE;
pr_debug("%s: dfps mode: suspend/resume\n",
__func__);
}
} else {
pr_debug("%s: dfps update mode not configured\n",
__func__);
pinfo->dynamic_fps =
false;
pr_debug("%s: dynamic FPS disabled\n",
__func__);
}
pinfo->new_fps = pinfo->mipi.frame_rate;
}
pinfo->panel_max_fps = mdss_panel_get_framerate(pinfo);
pinfo->panel_max_vtotal = mdss_panel_get_vtotal(pinfo);
ctrl_pdata->disp_en_gpio = of_get_named_gpio(ctrl_pdev->dev.of_node,
"qcom,platform-enable-gpio", 0);
if (!gpio_is_valid(ctrl_pdata->disp_en_gpio))
pr_err("%s:%d, Disp_en gpio not specified\n",
__func__, __LINE__);
if (pinfo->type == MIPI_CMD_PANEL) {
ctrl_pdata->disp_te_gpio = of_get_named_gpio(ctrl_pdev->dev.of_node,
"qcom,platform-te-gpio", 0);
if (!gpio_is_valid(ctrl_pdata->disp_te_gpio)) {
pr_err("%s:%d, Disp_te gpio not specified\n",
__func__, __LINE__);
}
}
if (gpio_is_valid(ctrl_pdata->disp_te_gpio) &&
pinfo->type == MIPI_CMD_PANEL) {
rc = gpio_request(ctrl_pdata->disp_te_gpio, "disp_te");
if (rc) {
pr_err("request TE gpio failed, rc=%d\n",
rc);
return -ENODEV;
}
rc = gpio_tlmm_config(GPIO_CFG(
ctrl_pdata->disp_te_gpio, 1,
GPIO_CFG_INPUT,
GPIO_CFG_PULL_DOWN,
GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s: unable to config tlmm = %d\n",
__func__, ctrl_pdata->disp_te_gpio);
gpio_free(ctrl_pdata->disp_te_gpio);
return -ENODEV;
}
rc = gpio_direction_input(ctrl_pdata->disp_te_gpio);
if (rc) {
pr_err("set_direction for disp_en gpio failed, rc=%d\n",
rc);
gpio_free(ctrl_pdata->disp_te_gpio);
return -ENODEV;
}
pr_debug("%s: te_gpio=%d\n", __func__,
ctrl_pdata->disp_te_gpio);
}
ctrl_pdata->rst_gpio = of_get_named_gpio(ctrl_pdev->dev.of_node,
"qcom,platform-reset-gpio", 0);
if (!gpio_is_valid(ctrl_pdata->rst_gpio))
pr_err("%s:%d, reset gpio not specified\n",
__func__, __LINE__);
if (pinfo->mode_gpio_state != MODE_GPIO_NOT_VALID) {
ctrl_pdata->mode_gpio = of_get_named_gpio(
ctrl_pdev->dev.of_node,
"qcom,platform-mode-gpio", 0);
if (!gpio_is_valid(ctrl_pdata->mode_gpio))
pr_info("%s:%d, mode gpio not specified\n",
__func__, __LINE__);
} else {
ctrl_pdata->mode_gpio = -EINVAL;
}
if (mdss_dsi_clk_init(ctrl_pdev, ctrl_pdata)) {
pr_err("%s: unable to initialize Dsi ctrl clks\n", __func__);
return -EPERM;
}
if (mdss_dsi_retrieve_ctrl_resources(ctrl_pdev,
pinfo->pdest,
ctrl_pdata)) {
pr_err("%s: unable to get Dsi controller res\n", __func__);
return -EPERM;
}
ctrl_pdata->panel_data.event_handler = mdss_dsi_event_handler;
ctrl_pdata->check_status = mdss_dsi_bta_status_check;
if (ctrl_pdata->bklt_ctrl == BL_PWM)
mdss_dsi_panel_pwm_cfg(ctrl_pdata);
mdss_dsi_ctrl_init(ctrl_pdata);
/*
* register in mdp driver
*/
ctrl_pdata->pclk_rate = mipi->dsi_pclk_rate;
ctrl_pdata->byte_clk_rate = pinfo->clk_rate / 8;
pr_debug("%s: pclk=%d, bclk=%d\n", __func__,
ctrl_pdata->pclk_rate, ctrl_pdata->byte_clk_rate);
ctrl_pdata->ctrl_state = CTRL_STATE_UNKNOWN;
if (pinfo->cont_splash_enabled) {
pinfo->panel_power_on = 1;
rc = mdss_dsi_panel_power_on(&(ctrl_pdata->panel_data), 1);
if (rc) {
pr_err("%s: Panel power on failed\n", __func__);
return rc;
}
mdss_dsi_clk_ctrl(ctrl_pdata, DSI_ALL_CLKS, 1);
ctrl_pdata->ctrl_state |=
(CTRL_STATE_PANEL_INIT | CTRL_STATE_MDP_ACTIVE);
} else {
pinfo->panel_power_on = 0;
}
rc = mdss_register_panel(ctrl_pdev, &(ctrl_pdata->panel_data));
if (rc) {
pr_err("%s: unable to register MIPI DSI panel\n", __func__);
return rc;
}
if (pinfo->pdest == DISPLAY_1) {
mdss_debug_register_base("dsi0",
ctrl_pdata->ctrl_base, ctrl_pdata->reg_size);
ctrl_pdata->ndx = 0;
} else {
mdss_debug_register_base("dsi1",
ctrl_pdata->ctrl_base, ctrl_pdata->reg_size);
ctrl_pdata->ndx = 1;
}
pr_debug("%s: Panel data initialized\n", __func__);
return 0;
}
static int __devinit hs_probe(struct platform_device *pdev)
{
int rc = 0;
struct input_dev *ipdev;
printk(" hs_probe start. \n"); //ps2 p13106
hs = kzalloc(sizeof(struct msm_handset), GFP_KERNEL);
if (!hs)
return -ENOMEM;
hs->sdev.name = "h2w";
hs->sdev.print_name = msm_headset_print_name;
rc = switch_dev_register(&hs->sdev);
if (rc)
goto err_switch_dev_register;
ipdev = input_allocate_device();
if (!ipdev) {
rc = -ENOMEM;
goto err_alloc_input_dev;
}
input_set_drvdata(ipdev, hs);
hs->ipdev = ipdev;
if (pdev->dev.platform_data)
hs->hs_pdata = pdev->dev.platform_data;
if (hs->hs_pdata->hs_name)
ipdev->name = hs->hs_pdata->hs_name;
else
ipdev->name = DRIVER_NAME;
////////////////////////////////////////////////////////////////////////////////////
#if defined(T_LASER2)
printk(" CONFIG_MACH_MSM8X55_LASER2 hs_probe start. \n"); //ps2 p13106
hs->type=EARJACK_STATE_OFF;
hs->hs_on=hs->mic_on=0;
hs->remotekey_pressed = 0;
hs->remotekey_first = 0;
hs->remotekey_count=0;
#if (BOARD_VER > WS20 )
// Initialize Voltage Mic bias
vreg_Earjack_GP6 = vreg_get(NULL, "gp6");
rc = vreg_set_level(vreg_Earjack_GP6, 2700);
if (rc) {
printk(KERN_ERR "%s: vreg_Earjack_GP6 set level failed (%d)\n", __func__, rc);
return -1;
}
rc = vreg_disable(vreg_Earjack_GP6);
if (rc) {
printk(KERN_ERR "%s: #include <mach/vreg.h> enable failed (%d)\n", __func__, rc);
return -1;
}
#endif //(BOARD_VER > WS20 )
// Initialize Work Queue
INIT_DELAYED_WORK(&earjack_work,earjack_detect_func); // INIT WORK
INIT_DELAYED_WORK(&remotekey_work,remotekey_detect_func);
// Initialize Wakelocks
wake_lock_init(&earjack_wake_lock, WAKE_LOCK_SUSPEND, "earjack_wake_lock_init");
wake_lock_init(&remotekey_wake_lock, WAKE_LOCK_SUSPEND, "remotekey_wake_lock_init");
// Get GPIO's
gpio_request(EARJACK_DET, "earjack_det");
gpio_request(REMOTEKEY_DET, "remotekey_det");
gpio_tlmm_config(GPIO_CFG(EARJACK_DET, 0, GPIO_CFG_INPUT,GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
rc = request_irq(gpio_to_irq(EARJACK_DET), Earjack_Det_handler, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "earjack_det-irq", hs);
gpio_tlmm_config(GPIO_CFG(REMOTEKEY_DET, 0, GPIO_CFG_INPUT,GPIO_CFG_NO_PULL, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
rc = request_irq(gpio_to_irq(REMOTEKEY_DET), Remotekey_Det_handler, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "remotekey-irq", hs);
// Init Mutex
set_irq_wake(gpio_to_irq(EARJACK_DET), 1);
set_irq_wake(gpio_to_irq(REMOTEKEY_DET), 1);
// check earjack is inserted
wake_lock(&earjack_wake_lock);
schedule_delayed_work(&earjack_work, 10); // after 100ms start function of earjack_detect_func
#endif // defined(T_LASER2)
ipdev->id.vendor = 0x0001;
ipdev->id.product = 1;
ipdev->id.version = 1;
input_set_capability(ipdev, EV_KEY, KEY_MEDIA);
input_set_capability(ipdev, EV_KEY, KEY_VOLUMEUP);
input_set_capability(ipdev, EV_KEY, KEY_VOLUMEDOWN);
input_set_capability(ipdev, EV_SW, SW_HEADPHONE_INSERT);
input_set_capability(ipdev, EV_SW, SW_MICROPHONE_INSERT);
input_set_capability(ipdev, EV_KEY, KEY_POWER);
input_set_capability(ipdev, EV_KEY, KEY_END);
rc = input_register_device(ipdev);
if (rc) {
dev_err(&ipdev->dev,
"hs_probe: input_register_device rc=%d\n", rc);
goto err_reg_input_dev;
}
platform_set_drvdata(pdev, hs);
rc = hs_rpc_init();
if (rc) {
dev_err(&ipdev->dev, "rpc init failure\n");
goto err_hs_rpc_init;
}
return 0;
err_hs_rpc_init:
input_unregister_device(ipdev);
ipdev = NULL;
err_reg_input_dev:
input_free_device(ipdev);
err_alloc_input_dev:
switch_dev_unregister(&hs->sdev);
err_switch_dev_register:
kfree(hs);
return rc;
}
int es705_gpio_init(struct es705_priv *es705)
{
int rc = 0;
#ifdef CONFIG_SND_SOC_ES704_TEMP
static int gpio_initialized = 0;
if (gpio_initialized)
return rc;
#endif
if (es705->pdata->reset_gpio != -1) {
rc = gpio_request(es705->pdata->reset_gpio, "es705_reset");
if (rc < 0) {
dev_err(es705->dev, "%s(): es705_reset request failed",
__func__);
goto reset_gpio_request_error;
}
rc = gpio_direction_output(es705->pdata->reset_gpio, 0);
if (rc < 0) {
dev_err(es705->dev, "%s(): es705_reset direction failed",
__func__);
goto reset_gpio_direction_error;
}
} else {
dev_warn(es705->dev, "%s(): es705_reset undefined\n",
__func__);
}
if (es705->pdata->wakeup_gpio != -1) {
rc = gpio_request(es705->pdata->wakeup_gpio, "es705_wakeup");
if (rc < 0) {
dev_err(es705->dev, "%s(): es705_wakeup request failed",
__func__);
goto wakeup_gpio_request_error;
}
rc = gpio_direction_output(es705->pdata->wakeup_gpio, 0);
if (rc < 0) {
dev_err(es705->dev, "%s(): es705_wakeup direction failed",
__func__);
goto wakeup_gpio_direction_error;
}
} else {
dev_warn(es705->dev, "%s(): wakeup_gpio undefined\n",
__func__);
}
/* under H/W rev 0.5 */
if (es705->pdata->uart_gpio != -1) {
rc = gpio_request(es705->pdata->uart_gpio, "es705_uart");
if (rc < 0) {
dev_err(es705->dev, "%s(): es705_uart request failed",
__func__);
goto uart_gpio_request_error;
}
rc = gpio_direction_output(es705->pdata->uart_gpio, 0);
if (rc < 0) {
dev_err(es705->dev, "%s(): es705_uart direction failed",
__func__);
goto uart_gpio_direction_error;
}
} else {
dev_warn(es705->dev, "%s(): es705_uart undefined\n",
__func__);
}
if (es705->pdata->gpiob_gpio) {
rc = request_threaded_irq(es705->pdata->irq_base,
NULL,
es705_irq_event, IRQF_TRIGGER_RISING,
"es705-irq-event", es705);
if (rc) {
dev_err(es705->dev, "%s(): event request_irq() failed\n",
__func__);
goto event_irq_request_error;
}
rc = irq_set_irq_wake(es705->pdata->irq_base, 1);
if (rc < 0) {
dev_err(es705->dev, "%s(): set event irq wake failed\n",
__func__);
disable_irq(es705->pdata->irq_base);
free_irq(es705->pdata->irq_base, es705);
goto event_irq_wake_error;
}
}
#ifdef CONFIG_MACH_K3GDUOS_CTC
gpio_tlmm_config(GPIO_CFG(es705->pdata->uart_tx_gpio, 2, GPIO_CFG_OUTPUT,GPIO_CFG_NO_PULL, GPIO_CFG_8MA), 1);
gpio_tlmm_config(GPIO_CFG(es705->pdata->uart_rx_gpio, 2, GPIO_CFG_INPUT,GPIO_CFG_NO_PULL, GPIO_CFG_8MA), 1);
#endif /* CONFIG_MACH_K3GDUOS_CTC */
#ifdef CONFIG_SND_SOC_ES704_TEMP
gpio_initialized = 1;
#endif
return rc;
uart_gpio_direction_error:
gpio_free(es705->pdata->uart_gpio);
uart_gpio_request_error:
wakeup_gpio_direction_error:
gpio_free(es705->pdata->wakeup_gpio);
wakeup_gpio_request_error:
reset_gpio_direction_error:
gpio_free(es705->pdata->reset_gpio);
reset_gpio_request_error:
event_irq_wake_error:
event_irq_request_error:
return rc;
}
//#include <linux/module.h>
int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2);
extern int msm_add_sdcc(unsigned int controller, struct mmc_platform_data *plat);
/* ---- SDCARD ---- */
/* ---- WIFI ---- */
static uint32_t wifi_on_gpio_table[] = {
//GPIO_CFG(116, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_4MA), /* DAT3 */
//GPIO_CFG(117, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_4MA), /* DAT2 */
//GPIO_CFG(118, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_4MA), /* DAT1 */
//GPIO_CFG(119, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_4MA), /* DAT0 */
//GPIO_CFG(111, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), /* CMD */
//GPIO_CFG(110, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA), /* CLK */
GPIO_CFG(RIDER_GPIO_WIFI_IRQ, 0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), /* WLAN IRQ */
};
static uint32_t wifi_off_gpio_table[] = {
//GPIO_CFG(116, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_UP, GPIO_CFG_4MA), /* DAT3 */
//GPIO_CFG(117, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_UP, GPIO_CFG_4MA), /* DAT2 */
//GPIO_CFG(118, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_UP, GPIO_CFG_4MA), /* DAT1 */
//GPIO_CFG(119, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_UP, GPIO_CFG_4MA), /* DAT0 */
//GPIO_CFG(111, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_UP, GPIO_CFG_4MA), /* CMD */
//GPIO_CFG(110, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_4MA), /* CLK */
GPIO_CFG(RIDER_GPIO_WIFI_IRQ, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* WLAN IRQ */
};
static void config_gpio_table(uint32_t *table, int len)
{
int n, rc;
#elif (defined CONFIG_PROJECT_P825A31) || (defined CONFIG_PROJECT_P825T20)
#define GPIO_RED_LIGHT_CTRL 49
#define GPIO_GREEN_LIGHT_CTRL 34
#else
#define GPIO_RED_LIGHT_CTRL 10
#define GPIO_GREEN_LIGHT_CTRL 11
#endif
#elif defined(CONFIG_USE_PM_GPIO_CTRL_LED)
#define GPIO_RED_LIGHT_CTRL PMIC_GPIO_5
#define GPIO_GREEN_LIGHT_CTRL PMIC_GPIO_6
#endif
#ifdef CONFIG_GPIO_10_11_CTRL_LED
static unsigned data_leds_gpio[] = {
GPIO_CFG(GPIO_RED_LIGHT_CTRL, 0, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* red */
GPIO_CFG(GPIO_GREEN_LIGHT_CTRL, 0, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* green */
};
#endif
struct BLINK_LED_data{
int blink_flag;
int blink_led_flag; // 0: off, 1:0n
int blink_on_time; //ms
int blink_off_time; //ms
struct timer_list timer;
struct work_struct work_led_on;
struct work_struct work_led_off;
struct led_classdev led;
};
static int lge_hsd_probe(struct platform_device *pdev)
{
int ret;
struct gpio_switch_platform_data *pdata = pdev->dev.platform_data;
HSD_DBG("%s\n", pdata->name);
if (!pdata) {
HSD_ERR("The platform data is null\n");
return -EBUSY;
}
hi = kzalloc(sizeof(struct hsd_info), GFP_KERNEL);
if (!hi) {
HSD_ERR("Failed to allloate headset per device info\n");
return -ENOMEM;
}
hi->gpio = pdata->gpio;
mutex_init(&hi->mutex_lock);
hi->sdev.name = pdata->name;
hi->sdev.print_state = lge_hsd_print_state;
hi->sdev.print_name = lge_hsd_print_name;
ret = switch_dev_register(&hi->sdev);
if (ret < 0) {
HSD_ERR("Failed to register switch device\n");
goto err_switch_dev_register;
}
hs_detect_work_queue = create_workqueue("hs_detect");
if (hs_detect_work_queue == NULL) {
HSD_ERR("Failed to create workqueue\n");
goto err_create_work_queue;
}
ret = gpio_request(hi->gpio, pdev->name);
if (ret < 0) {
HSD_ERR("Failed to request gpio%d\n", hi->gpio);
goto err_request_detect_gpio;
}
ret = gpio_direction_input(hi->gpio);
if (ret < 0) {
HSD_ERR("Failed to set gpio%d as input\n", hi->gpio);
goto err_set_detect_gpio;
}
if (hi->gpio == LGE_HEADSET_DETECT_GPIO) {
ret = gpio_tlmm_config(GPIO_CFG(hi->gpio, 0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL,
GPIO_CFG_2MA), GPIO_CFG_ENABLE);
if (ret < 0) {
HSD_ERR("Failed to configure gpio%d tlmm\n", hi->gpio);
goto err_set_detect_gpio;
}
}
hi->irq = gpio_to_irq(pdata->gpio);
if (hi->irq < 0) {
HSD_ERR("Failed to get interrupt number\n");
ret = hi->irq;
goto err_get_irq_num_failed;
}
ret = request_irq(hi->irq, gpio_irq_handler,
IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, pdev->name, NULL);
if (ret < 0) {
HSD_ERR("Failed to request interrupt handler\n");
goto err_request_detect_irq;
}
ret = irq_set_irq_wake(hi->irq, 1);
if (ret < 0) {
HSD_ERR("Failed to set interrupt wake\n");
goto err_request_input_dev;
}
hi->input = input_allocate_device();
if (!hi->input) {
HSD_ERR("Failed to allocate input device\n");
ret = -ENOMEM;
goto err_request_input_dev;
}
if (pdev->dev.platform_data)
hi->input->name = "7k_headset";
else
hi->input->name = "hsd_headset";
hi->input->id.vendor = 0x0001;
hi->input->id.product = 1;
hi->input->id.version = 1;
input_set_capability(hi->input, EV_SW, SW_HEADPHONE_INSERT);
ret = input_register_device(hi->input);
if (ret) {
HSD_ERR("Failed to register input device\n");
goto err_register_input_dev;
}
/* Perform initial detection */
return 0;
err_register_input_dev:
input_free_device(hi->input);
err_request_input_dev:
free_irq(hi->irq, 0);
err_request_detect_irq:
err_get_irq_num_failed:
err_set_detect_gpio:
gpio_free(hi->gpio);
err_request_detect_gpio:
destroy_workqueue(hs_detect_work_queue);
err_create_work_queue:
switch_dev_unregister(&hi->sdev);
err_switch_dev_register:
HSD_ERR("Failed to register driver\n");
return ret;
}
static void hallic_init_gpio(void) {
gpio_request(s5712ACDL1_pdata.irq_pin,"hallic_irq");
gpio_tlmm_config(GPIO_CFG(s5712ACDL1_pdata.irq_pin,
0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
}
void mdp_config_vsync(struct platform_device *pdev,
struct msm_fb_data_type *mfd)
{
/* vsync on primary lcd only for now */
if ((mfd->dest != DISPLAY_LCD) || (mfd->panel_info.pdest != DISPLAY_1)
|| (!vsync_mode)) {
goto err_handle;
}
vsync_clk_status = 0;
if (mfd->panel_info.lcd.vsync_enable) {
mfd->total_porch_lines = mfd->panel_info.lcd.v_back_porch +
mfd->panel_info.lcd.v_front_porch +
mfd->panel_info.lcd.v_pulse_width;
mfd->total_lcd_lines =
mfd->panel_info.yres + mfd->total_porch_lines;
mfd->lcd_ref_usec_time =
100000000 / mfd->panel_info.lcd.refx100;
mfd->vsync_handler_pending = FALSE;
mfd->last_vsync_timetick.tv64 = 0;
#ifdef MDP_HW_VSYNC
if (mdp_vsync_clk == NULL)
mdp_vsync_clk = clk_get(&pdev->dev, "vsync_clk");
if (IS_ERR(mdp_vsync_clk)) {
printk(KERN_ERR "error: can't get mdp_vsync_clk!\n");
mfd->use_mdp_vsync = 0;
} else
mfd->use_mdp_vsync = 1;
if (mfd->use_mdp_vsync) {
uint32 vsync_cnt_cfg_dem;
uint32 mdp_vsync_clk_speed_hz;
mdp_vsync_clk_speed_hz = clk_get_rate(mdp_vsync_clk);
if (mdp_vsync_clk_speed_hz == 0) {
mfd->use_mdp_vsync = 0;
} else {
/*
* Do this calculation in 2 steps for
* rounding uint32 properly.
*/
vsync_cnt_cfg_dem =
(mfd->panel_info.lcd.refx100 *
mfd->total_lcd_lines) / 100;
vsync_cnt_cfg =
(mdp_vsync_clk_speed_hz) /
vsync_cnt_cfg_dem;
mdp_vsync_cfg_regs(mfd, TRUE);
}
}
#else
mfd->use_mdp_vsync = 0;
hrtimer_init(&mfd->dma_hrtimer, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
mfd->dma_hrtimer.function = mdp_dma2_vsync_hrtimer_handler;
mfd->vsync_width_boundary = vmalloc(mfd->panel_info.xres * 4);
#endif
#ifdef CONFIG_FB_MSM_MDDI
mfd->channel_irq = 0;
if (mfd->panel_info.lcd.hw_vsync_mode) {
u32 vsync_gpio = mfd->vsync_gpio;
u32 ret;
if (vsync_gpio == -1) {
MSM_FB_INFO("vsync_gpio not defined!\n");
goto err_handle;
}
ret = gpio_tlmm_config(GPIO_CFG
(vsync_gpio,
(mfd->use_mdp_vsync) ? 1 : 0,
GPIO_CFG_INPUT,
GPIO_CFG_PULL_DOWN,
GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
if (ret)
goto err_handle;
/*
* if use_mdp_vsync, then no interrupt need since
* mdp_vsync is feed directly to mdp to reset the
* write pointer counter. therefore no irq_handler
* need to reset write pointer counter.
*/
if (!mfd->use_mdp_vsync) {
mfd->channel_irq = MSM_GPIO_TO_INT(vsync_gpio);
if (request_irq
(mfd->channel_irq,
&mdp_hw_vsync_handler_proxy,
IRQF_TRIGGER_FALLING, "VSYNC_GPIO",
(void *)mfd)) {
MSM_FB_INFO
("irq=%d failed! vsync_gpio=%d\n",
mfd->channel_irq,
vsync_gpio);
goto err_handle;
}
}
}
#endif
mdp_hw_vsync_clk_enable(mfd);
mdp_set_vsync((unsigned long)mfd);
}
return;
err_handle:
if (mfd->vsync_width_boundary)
vfree(mfd->vsync_width_boundary);
mfd->panel_info.lcd.vsync_enable = FALSE;
printk(KERN_ERR "%s: failed!\n", __func__);
}
static int icp_hd_power(int on)
{
int rc = 0;
//int status=0;
//CAM_INFO("%s %s:%d power = %d\n", __FILE__, __func__, __LINE__,on);
if(on) {
//standby control
rc = gpio_tlmm_config(GPIO_CFG(SENSOR_STANDBY_8M, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),GPIO_CFG_ENABLE);
if (!rc) {
//CAM_INFO("%s %s:%d\n", __FILE__, __func__, __LINE__);
gpio_set_value(SENSOR_STANDBY_8M,0);
}
rc = regulator_enable(s2b_1p2v_8m);
if (rc) {
//CAM_ERR("%s: Enable regulator s2b_1p2v failed\n", __func__);
goto fail;
}
msleep(1);
rc = regulator_enable(mvs0b_1p8v_8m);
if (rc) {
//CAM_ERR("%s: Enable regulator mvs0b_1p8v failed\n", __func__);
goto fail;
}
msleep(1);
rc = regulator_enable(lvs3b_1p8v);
if (rc) {
//CAM_ERR("%s: Enable regulator lvs3b_1p8v failed\n", __func__);
goto fail;
}
msleep(1);
rc = regulator_enable(l2b_2p8v_8m);
if (rc) {
//CAM_ERR("%s: Enable regulator l2b_2p8v failed\n", __func__);
goto fail;
}
msleep(1);
rc = regulator_enable(l3b_2p8v_8m);
if (rc) {
//CAM_ERR("%s: Enable regulator l3b_2p8v failed\n", __func__);
goto fail;
}
//CAM_INFO("%s %s ON Success:%d\n", __FILE__, __func__, __LINE__);
}
else {
//CAM_INFO("%s %s:%d power \n", __FILE__, __func__, __LINE__);
//CAM_INFO("%s %s:%d power \n", __FILE__, __func__, __LINE__);
if(1)//mvs0b_1p8v)
{
rc = regulator_disable(mvs0b_1p8v_8m);
if (rc){
//CAM_ERR("%s: Disable regulator mvs0b_1p8v failed\n", __func__);
goto fail;
}
}
//CAM_INFO("%s %s:%d power \n", __FILE__, __func__, __LINE__);
if(1)//l2b_2p8v)
{
rc = regulator_disable(l2b_2p8v_8m);
if (rc){
//CAM_ERR("%s: Disable regulator l2b_2p8v failed\n", __func__);
goto fail;
}
regulator_put(l2b_2p8v_8m);
}
//CAM_INFO("%s %s:%d power \n", __FILE__, __func__, __LINE__);
if(1)//l3b_2p8v)
{
rc = regulator_disable(l3b_2p8v_8m);
if (rc){
//CAM_ERR("%s: Disable regulator l3b_2p8v failed\n", __func__);
goto fail;
}
regulator_put(l3b_2p8v_8m);
}
//CAM_INFO("%s %s OFF Success:%d\n", __FILE__, __func__, __LINE__);
}
return rc;
fail:
CAM_ERR("%s %s Failed!:%d\n", __FILE__, __func__, __LINE__);
if(l2b_2p8v_8m){
regulator_put(l2b_2p8v_8m);
}
if(s2b_1p2v_8m){
regulator_put(s2b_1p2v_8m);
}
if(l3b_2p8v_8m){
regulator_put(l3b_2p8v_8m);
}
return rc;
}
static int mipi_dsi_panel_power(int on)
{
static struct regulator *reg_l2;
int rc;
PR_DISP_INFO("%s: power %s.\n", __func__, on ? "on" : "off");
if (!dsi_power_on) {
gpio_tlmm_config(GPIO_CFG(MSM_LCD_ID0, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, 0), GPIO_CFG_ENABLE);
gpio_tlmm_config(GPIO_CFG(MSM_LCD_ID1, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, 0), GPIO_CFG_ENABLE);
reg_l2 = regulator_get(&msm_mipi_dsi1_device.dev,
"dsi_vdda");
if (IS_ERR(reg_l2)) {
pr_err("could not get 8038_l2, rc = %ld\n",
PTR_ERR(reg_l2));
return -ENODEV;
}
rc = regulator_set_voltage(reg_l2, 1200000, 1200000);
if (rc) {
pr_err("set_voltage l2 failed, rc=%d\n", rc);
return -EINVAL;
}
dsi_power_on = true;
if (first_inited) {
first_inited = false;
rc = regulator_set_optimum_mode(reg_l2, 100000);
if (rc < 0) {
pr_err("set_optimum_mode l2 failed, rc=%d\n", rc);
return -EINVAL;
}
rc = regulator_enable(reg_l2);
if (rc) {
pr_err("enable l2 failed, rc=%d\n", rc);
return -ENODEV;
}
return 0;
}
}
if (on) {
if (panel_type == PANEL_ID_K2_WL_AUO || panel_type == PANEL_ID_K2_WL_AUO_C2) {
rc = regulator_set_optimum_mode(reg_l2, 100000);
if (rc < 0) {
pr_err("set_optimum_mode l2 failed, rc=%d\n", rc);
return -EINVAL;
}
gpio_set_value(MSM_V_LCMIO_1V8_EN, 1);
hr_msleep(1);
gpio_set_value(MSM_V_LCM_3V3_EN, 1);
rc = regulator_enable(reg_l2);
if (rc) {
pr_err("enable l2 failed, rc=%d\n", rc);
return -ENODEV;
}
hr_msleep(55);
gpio_set_value(MSM_LCD_RSTz, 1);
usleep(20);
gpio_set_value(MSM_LCD_RSTz, 0);
usleep(30);
gpio_set_value(MSM_LCD_RSTz, 1);
hr_msleep(120);
} else if (panel_type == PANEL_ID_K2_WL_JDI_NT) {
rc = regulator_set_optimum_mode(reg_l2, 100000);
if (rc < 0) {
pr_err("set_optimum_mode l2 failed, rc=%d\n", rc);
return -EINVAL;
}
gpio_set_value(MSM_V_LCMIO_1V8_EN, 1);
hr_msleep(1);
gpio_set_value(MSM_V_LCM_3V3_EN, 1);
rc = regulator_enable(reg_l2);
if (rc) {
pr_err("enable l2 failed, rc=%d\n", rc);
return -ENODEV;
}
hr_msleep(50);
gpio_set_value(MSM_LCD_RSTz, 1);
hr_msleep(10);
gpio_set_value(MSM_LCD_RSTz, 0);
hr_msleep(10);
gpio_set_value(MSM_LCD_RSTz, 1);
hr_msleep(120);
}
} else {
if (panel_type == PANEL_ID_K2_WL_AUO || panel_type == PANEL_ID_K2_WL_AUO_C2) {
rc = regulator_disable(reg_l2);
if (rc) {
pr_err("disable reg_l2 failed, rc=%d\n", rc);
return -ENODEV;
}
rc = regulator_set_optimum_mode(reg_l2, 100);
if (rc < 0) {
pr_err("set_optimum_mode l2 failed, rc=%d\n", rc);
return -EINVAL;
}
gpio_set_value(MSM_LCD_RSTz, 0);
hr_msleep(1);
gpio_set_value(MSM_V_LCM_3V3_EN, 0);
hr_msleep(5);
gpio_set_value(MSM_V_LCMIO_1V8_EN, 0);
} else if (panel_type == PANEL_ID_K2_WL_JDI_NT) {
rc = regulator_disable(reg_l2);
if (rc) {
pr_err("disable reg_l2 failed, rc=%d\n", rc);
return -ENODEV;
}
rc = regulator_set_optimum_mode(reg_l2, 100);
if (rc < 0) {
pr_err("set_optimum_mode l2 failed, rc=%d\n", rc);
return -EINVAL;
}
hr_msleep(10);
gpio_set_value(MSM_LCD_RSTz, 0);
hr_msleep(10);
gpio_set_value(MSM_V_LCM_3V3_EN, 0);
hr_msleep(10);
gpio_set_value(MSM_V_LCMIO_1V8_EN, 0);
}
}
return 0;
}
void mdp_config_vsync(struct msm_fb_data_type *mfd)
{
// vsync on primary lcd only for now
if ((mfd->dest != DISPLAY_LCD) || (mfd->panel_info.pdest != DISPLAY_1)
|| (!vsync_mode)) {
goto err_handle;
}
if (mfd->panel_info.lcd.vsync_enable) {
mfd->total_porch_lines = mfd->panel_info.lcd.v_back_porch +
mfd->panel_info.lcd.v_front_porch +
mfd->panel_info.lcd.v_pulse_width;
mfd->total_lcd_lines =
mfd->panel_info.yres + mfd->total_porch_lines;
mfd->lcd_ref_usec_time =
100000000 / mfd->panel_info.lcd.refx100;
mfd->vsync_handler_pending = FALSE;
mfd->last_vsync_timetick.tv.sec = 0;
mfd->last_vsync_timetick.tv.nsec = 0;
#ifdef MDP_HW_VSYNC
if (mdp_vsync_clk == NULL)
mdp_vsync_clk = clk_get(NULL, "mdp_vsync_clk");
if (IS_ERR(mdp_vsync_clk)) {
printk(KERN_ERR "error: can't get mdp_vsync_clk!\n");
mfd->use_mdp_vsync = 0;
} else
mfd->use_mdp_vsync = 1;
if (mfd->use_mdp_vsync) {
uint32 vsync_cnt_cfg, vsync_cnt_cfg_dem;
uint32 mdp_vsync_clk_speed_hz;
mdp_vsync_clk_speed_hz = clk_get_rate(mdp_vsync_clk);
if (mdp_vsync_clk_speed_hz == 0) {
mfd->use_mdp_vsync = 0;
} else {
// Do this calculation in 2 steps for rounding uint32 properly.
vsync_cnt_cfg_dem =
(mfd->panel_info.lcd.refx100 *
mfd->total_lcd_lines) / 100;
vsync_cnt_cfg =
(mdp_vsync_clk_speed_hz) /
vsync_cnt_cfg_dem;
//MDP cmd block enable
mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON,
FALSE);
mdp_hw_vsync_clk_enable(mfd);
MDP_OUTP(MDP_BASE + 0x300,
((mfd->total_lcd_lines -
1) << MDP_SYNCFG_HGT_LOC) | (mfd->
panel_info.
lcd.
hw_vsync_mode
?
MDP_SYNCFG_VSYNC_EXT_EN
: 0) |
MDP_SYNCFG_VSYNC_INT_EN |
vsync_cnt_cfg);
// load the last line + 1 to be in the safety zone
vsync_load_cnt = mfd->panel_info.yres;
// line counter init value at the next pulse
MDP_OUTP(MDP_BASE + 0x328, vsync_load_cnt);
// external vsync source pulse width and polarity flip
MDP_OUTP(MDP_BASE + 0x318, BIT(30) | BIT(0));
// threshold
MDP_OUTP(MDP_BASE + 0x200,
(vsync_above_th << 16) |
(vsync_start_th));
mdp_hw_vsync_clk_disable(mfd);
// MDP cmd block disable
mdp_pipe_ctrl(MDP_CMD_BLOCK,
MDP_BLOCK_POWER_OFF, FALSE);
}
}
#else
mfd->use_mdp_vsync = 0;
hrtimer_init(&mfd->dma_hrtimer, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
mfd->dma_hrtimer.function = mdp_dma2_vsync_hrtimer_handler;
mfd->vsync_width_boundary = vmalloc(mfd->panel_info.xres * 4);
#endif
mfd->channel_irq = 0;
if (mfd->panel_info.lcd.hw_vsync_mode) {
u32 vsync_gpio = mfd->vsync_gpio;
u32 ret;
if (vsync_gpio == -1) {
MSM_FB_INFO("vsync_gpio not defined!\n");
goto err_handle;
}
ret = gpio_tlmm_config(GPIO_CFG
(vsync_gpio,
(mfd->use_mdp_vsync) ? 1 : 0,
GPIO_INPUT,
GPIO_PULL_DOWN,
GPIO_2MA),
GPIO_ENABLE);
if (ret)
goto err_handle;
if (!mfd->use_mdp_vsync) {
mfd->channel_irq = MSM_GPIO_TO_INT(vsync_gpio);
if (request_irq
(mfd->channel_irq,
&mdp_hw_vsync_handler_proxy,
IRQF_TRIGGER_FALLING, "VSYNC_GPIO",
(void *)mfd)) {
MSM_FB_INFO
("irq=%d failed! vsync_gpio=%d\n",
mfd->channel_irq,
vsync_gpio);
goto err_handle;
}
}
}
mdp_set_vsync((unsigned long)mfd);
}
return;
err_handle:
if (mfd->vsync_width_boundary)
vfree(mfd->vsync_width_boundary);
mfd->panel_info.lcd.vsync_enable = FALSE;
printk(KERN_ERR "%s: failed!\n", __func__);
}
static unsigned int msm_AR600X_setup_power(bool on)
{
int rc = 0;
static bool init_done;
if (wlan_powered_up) {
pr_info("WLAN already powered up\n");
return 0;
}
if (unlikely(!init_done)) {
gpio_wlan_config();
rc = qrf6285_init_regs();
if (rc) {
pr_err("%s: qrf6285 init failed = %d\n", __func__, rc);
return rc;
} else {
init_done = true;
}
}
rc = wlan_switch_regulators(on);
if (rc) {
pr_err("%s: wlan_switch_regulators error = %d\n", __func__, rc);
goto out;
}
/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
if (machine_is_msm7627a_qrd1()) {
rc = gpio_tlmm_config(GPIO_CFG(GPIO_WLAN_3V3_EN, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
GPIO_CFG_2MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s gpio_tlmm_config 119 failed,error = %d\n",
__func__, rc);
goto reg_disable;
}
gpio_set_value(GPIO_WLAN_3V3_EN, 1);
}
/*
* gpio_wlan_sys_rest_en is not from the GPIO expander for QRD7627a,
* EVB1.0 and QRD8625,so the below step is required for those devices.
*/
if (machine_is_msm7627a_qrd1() || machine_is_msm7627a_evb()
|| machine_is_msm8625_evb()
|| machine_is_msm8625_evt()
|| machine_is_msm7627a_qrd3()
|| machine_is_msm8625_qrd7()) {
rc = gpio_tlmm_config(GPIO_CFG(gpio_wlan_sys_rest_en, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
GPIO_CFG_2MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s gpio_tlmm_config 119 failed,error = %d\n",
__func__, rc);
goto qrd_gpio_fail;
}
gpio_set_value(gpio_wlan_sys_rest_en, 1);
} else {
rc = gpio_request(gpio_wlan_sys_rest_en, "WLAN_DEEP_SLEEP_N");
if (rc) {
pr_err("%s: WLAN sys_rest_en GPIO %d request failed %d\n",
__func__,
gpio_wlan_sys_rest_en, rc);
goto qrd_gpio_fail;
}
rc = setup_wlan_gpio(on);
if (rc) {
pr_err("%s: wlan_set_gpio = %d\n", __func__, rc);
goto gpio_fail;
}
}
/* Enable the A0 clock */
rc = setup_wlan_clock(on);
if (rc) {
pr_err("%s: setup_wlan_clock = %d\n", __func__, rc);
goto set_gpio_fail;
}
/* Configure A0 clock to be slave to WLAN_CLK_PWR_REQ */
rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_A0,
PMAPP_CLOCK_VOTE_PIN_CTRL);
if (rc) {
pr_err("%s: Configuring A0 to Pin controllable failed %d\n",
__func__, rc);
goto set_clock_fail;
}
pr_info("WLAN power-up success\n");
wlan_powered_up = true;
return 0;
set_clock_fail:
setup_wlan_clock(0);
set_gpio_fail:
setup_wlan_gpio(0);
gpio_fail:
if (!(machine_is_msm7627a_qrd1() || machine_is_msm7627a_evb() ||
machine_is_msm8625_evb() || machine_is_msm8625_evt() ||
machine_is_msm7627a_qrd3() || machine_is_msm8625_qrd7()))
gpio_free(gpio_wlan_sys_rest_en);
qrd_gpio_fail:
/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
if (machine_is_msm7627a_qrd1())
gpio_free(GPIO_WLAN_3V3_EN);
reg_disable:
wlan_switch_regulators(0);
out:
pr_info("WLAN power-up failed\n");
wlan_powered_up = false;
return rc;
}
{
.gpio = PWR_KEY_MSMz,
.code = KEY_POWER,
},
{
.gpio = VOL_DOWNz_XA_XB,
.code = KEY_VOLUMEDOWN,
},
{
.gpio = VOL_UPz_XA_XB,
.code = KEY_VOLUMEUP,
},
};
static uint32_t matirx_inputs_gpio_table_xc[] = {
GPIO_CFG(PWR_KEY_MSMz, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_UP,
GPIO_CFG_2MA),
GPIO_CFG(VOL_DOWNz_XC, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_UP,
GPIO_CFG_2MA),
GPIO_CFG(VOL_UPz_XC, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_UP,
GPIO_CFG_2MA),
};
static uint32_t matirx_inputs_gpio_table[] = {
GPIO_CFG(PWR_KEY_MSMz, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_UP,
GPIO_CFG_2MA),
GPIO_CFG(VOL_DOWNz_XA_XB, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_UP,
GPIO_CFG_2MA),
GPIO_CFG(VOL_UPz_XA_XB, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_UP,
GPIO_CFG_2MA),
};
static unsigned int msm_AR600X_shutdown_power(bool on)
{
int rc = 0;
if (!wlan_powered_up) {
pr_info("WLAN is not powered up, returning success\n");
return 0;
}
/* Disable the A0 clock */
rc = setup_wlan_clock(on);
if (rc) {
pr_err("%s: setup_wlan_clock = %d\n", __func__, rc);
goto set_clock_fail;
}
/*
* gpio_wlan_sys_rest_en is not from the GPIO expander for QRD7627a,
* EVB1.0 and QRD8625,so the below step is required for those devices.
*/
if (machine_is_msm7627a_qrd1() || machine_is_msm7627a_evb()
|| machine_is_msm8625_evb()
|| machine_is_msm8625_evt()
|| machine_is_msm7627a_qrd3()
|| machine_is_msm8625_qrd7()) {
rc = gpio_tlmm_config(GPIO_CFG(gpio_wlan_sys_rest_en, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
GPIO_CFG_2MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s gpio_tlmm_config 119 failed,error = %d\n",
__func__, rc);
goto gpio_fail;
}
gpio_set_value(gpio_wlan_sys_rest_en, 0);
} else {
rc = setup_wlan_gpio(on);
if (rc) {
pr_err("%s: setup_wlan_gpio = %d\n", __func__, rc);
goto set_gpio_fail;
}
gpio_free(gpio_wlan_sys_rest_en);
}
/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
if (machine_is_msm7627a_qrd1()) {
rc = gpio_tlmm_config(GPIO_CFG(GPIO_WLAN_3V3_EN, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
GPIO_CFG_2MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s gpio_tlmm_config 119 failed,error = %d\n",
__func__, rc);
goto qrd_gpio_fail;
}
gpio_set_value(GPIO_WLAN_3V3_EN, 0);
}
rc = wlan_switch_regulators(on);
if (rc) {
pr_err("%s: wlan_switch_regulators error = %d\n",
__func__, rc);
goto reg_disable;
}
wlan_powered_up = false;
pr_info("WLAN power-down success\n");
return 0;
set_clock_fail:
setup_wlan_clock(0);
set_gpio_fail:
setup_wlan_gpio(0);
gpio_fail:
if (!(machine_is_msm7627a_qrd1() || machine_is_msm7627a_evb() ||
machine_is_msm8625_evb() || machine_is_msm8625_evt() ||
machine_is_msm7627a_qrd3() || machine_is_msm8625_qrd7()))
gpio_free(gpio_wlan_sys_rest_en);
qrd_gpio_fail:
/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
if (machine_is_msm7627a_qrd1())
gpio_free(GPIO_WLAN_3V3_EN);
reg_disable:
wlan_switch_regulators(0);
pr_info("WLAN power-down failed\n");
return rc;
}
static int mipi_dsi_panel_power(int on)
{
static struct regulator *reg_lvs5, *reg_l2;
static int gpio36, gpio37;
int rc;
pr_debug("%s: on=%d\n", __func__, on);
if (!dsi_power_on) {
reg_lvs5 = regulator_get(&msm_mipi_dsi1_device.dev,
"dsi1_vddio");
if (IS_ERR_OR_NULL(reg_lvs5)) {
pr_err("could not get 8921_lvs5, rc = %ld\n",
PTR_ERR(reg_lvs5));
return -ENODEV;
}
reg_l2 = regulator_get(&msm_mipi_dsi1_device.dev,
"dsi1_pll_vdda");
if (IS_ERR_OR_NULL(reg_l2)) {
pr_err("could not get 8921_l2, rc = %ld\n",
PTR_ERR(reg_l2));
return -ENODEV;
}
rc = regulator_set_voltage(reg_l2, 1200000, 1200000);
if (rc) {
pr_err("set_voltage l2 failed, rc=%d\n", rc);
return -EINVAL;
}
gpio36 = PM8921_GPIO_PM_TO_SYS(V_LCM_N5V_EN);
rc = gpio_request(gpio36, "lcd_5v-");
if (rc) {
pr_err("request lcd_5v- failed, rc=%d\n", rc);
return -ENODEV;
}
gpio37 = PM8921_GPIO_PM_TO_SYS(V_LCM_P5V_EN);
rc = gpio_request(gpio37, "lcd_5v+");
if (rc) {
pr_err("request lcd_5v+ failed, rc=%d\n", rc);
return -ENODEV;
}
gpio_tlmm_config(GPIO_CFG(LCD_RST, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
dsi_power_on = true;
}
if (on) {
if (!first_init) {
rc = regulator_enable(reg_lvs5);
if (rc) {
pr_err("enable lvs5 failed, rc=%d\n", rc);
return -ENODEV;
}
msleep(200);
gpio_set_value_cansleep(gpio37, 1);
msleep(10);
gpio_set_value_cansleep(gpio36, 1);
rc = regulator_set_optimum_mode(reg_l2, 100000);
if (rc < 0) {
pr_err("set_optimum_mode l2 failed, rc=%d\n", rc);
return -EINVAL;
}
rc = regulator_enable(reg_l2);
if (rc) {
pr_err("enable l2 failed, rc=%d\n", rc);
return -ENODEV;
}
msm_xo_mode_vote(wa_xo, MSM_XO_MODE_ON);
gpio_set_value(LCD_RST, 0);
msleep(10);
gpio_set_value(LCD_RST, 1);
msm_xo_mode_vote(wa_xo, MSM_XO_MODE_OFF);
} else {
rc = regulator_enable(reg_lvs5);
if (rc) {
pr_err("enable lvs5 failed, rc=%d\n", rc);
return -ENODEV;
}
rc = regulator_set_optimum_mode(reg_l2, 100000);
if (rc < 0) {
pr_err("set_optimum_mode l2 failed, rc=%d\n", rc);
return -EINVAL;
}
rc = regulator_enable(reg_l2);
if (rc) {
pr_err("enable l2 failed, rc=%d\n", rc);
return -ENODEV;
}
msm_xo_mode_vote(wa_xo, MSM_XO_MODE_ON);
msleep(10);
msm_xo_mode_vote(wa_xo, MSM_XO_MODE_OFF);
}
} else {
if (system_rev == XB) {
gpio_tlmm_config(GPIO_CFG(MBAT_IN_XA_XB, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
gpio_set_value(MBAT_IN_XA_XB, 0);
} else if (system_rev >= XC) {
gpio_tlmm_config(GPIO_CFG(BL_HW_EN_XC_XD, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
gpio_set_value(BL_HW_EN_XC_XD, 0);
}
gpio_set_value(LCD_RST, 0);
msleep(10);
rc = regulator_disable(reg_l2);
if (rc) {
pr_err("disable reg_l2 failed, rc=%d\n", rc);
return -ENODEV;
}
gpio_set_value_cansleep(gpio36, 0);
msleep(10);
gpio_set_value_cansleep(gpio37, 0);
msleep(100);
rc = regulator_disable(reg_lvs5);
if (rc) {
pr_err("disable reg_lvs5 failed, rc=%d\n", rc);
return -ENODEV;
}
}
return 0;
}
static int mipi_dsi_panel_power(int on)
{
int rc = 0;
/* LGE_CHANGE_S [email protected] 2013-01-15 booting animation sometimes no display*/
if(on == 0){
if(firstbootend == 0){
firstbootend = 1;
return 0;
}
}
/* LGE_CHANGE_E [email protected] 2013-01-15 booting animation sometimes no display*/
if (unlikely(!dsi_gpio_initialized))
{
/* Resetting LCD Panel*/
rc = gpio_request(GPIO_LCD_RESET, "lcd_reset");
if (rc) {
pr_err("%s: gpio_request GPIO_LCD_RESET failed\n", __func__);
}
rc = gpio_tlmm_config(GPIO_CFG(GPIO_LCD_RESET, 0, GPIO_CFG_OUTPUT,
GPIO_CFG_NO_PULL, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
if (rc) {
printk(KERN_ERR "%s: Failed to configure GPIO %d\n",
__func__, rc);
}
dsi_gpio_initialized = 1;
}
if (on) {
rc = regulator_enable(regulator_mipi_dsi[0]);
if (rc) {
pr_err("%s: vreg_enable failed for mipi_dsi_v18\n", __func__);
goto vreg_put_dsi_v18;
}
msleep(3); //LGE_CHANGE_S [changbum.lee] 20120130 : add delay
rc = regulator_enable(regulator_mipi_dsi[1]);
if (rc) {
pr_err("%s: vreg_enable failed for mipi_dsi_v28\n", __func__);
goto vreg_put_dsi_v28;
}
rc = gpio_direction_output(GPIO_LCD_RESET, 1);
if (rc) {
pr_err("%s: gpio_direction_output failed for lcd_reset\n", __func__);
goto vreg_put_dsi_v28;
}
if (firstbootend)
{
gpio_set_value(GPIO_LCD_RESET, 0); //sohyun.nam, 12-11-23, arrange nReset pin
msleep(8); //sohyun.nam, 12-11-23, arrange nReset pin
rc = regulator_disable(regulator_mipi_dsi[1]);//2.8v
msleep(15); //sohyun.nam, 12-11-23, arrange nReset pin
if (rc) {
pr_err("%s: vreg_disable failed for mipi_dsi_v28\n", __func__);
goto vreg_put_dsi_v28;
}
rc = regulator_enable(regulator_mipi_dsi[1]);//2.8v
msleep(15); //sohyun.nam, 12-11-23, arrange nReset pin
gpio_set_value(GPIO_LCD_RESET, 1); //sohyun.nam
msleep(8);
if (rc) {
pr_err("%s: vreg_enable failed for mipi_dsi_v28\n", __func__);
goto vreg_put_dsi_v28;
}
}
else {
firstbootend=1;
}
}
else//off
{
rc = regulator_disable(regulator_mipi_dsi[0]);
if (rc) {
pr_err("%s: vreg_disable failed for mipi_dsi_v18\n", __func__);
goto vreg_put_dsi_v18;
}
rc = regulator_disable(regulator_mipi_dsi[1]);
if (rc) {
pr_err("%s: vreg_disable failed for mipi_dsi_v28\n", __func__);
goto vreg_put_dsi_v28;
}
}
return 0;
vreg_put_dsi_v28:
regulator_put(regulator_mipi_dsi[1]);
vreg_put_dsi_v18:
regulator_put(regulator_mipi_dsi[0]);
return rc;
}
#endif
#elif defined(CONFIG_MACH_CHAGALL_KDI)
#define GPIO_WL_HOST_WAKE 18
#else
#define GPIO_WL_HOST_WAKE 54
#endif
#if defined(CONFIG_SEC_KS01_PROJECT) || defined(CONFIG_SEC_JACTIVE_PROJECT)
extern int ice_gpiox_get(int num);
extern int ice_gpiox_set(int num, int val);
#endif
#if !defined(CONFIG_SEC_K_PROJECT) && !defined(CONFIG_SEC_KS01_PROJECT) && !defined(CONFIG_SEC_KACTIVE_PROJECT) &&\
!defined(CONFIG_SEC_JACTIVE_PROJECT) && !defined(CONFIG_SEC_PATEK_PROJECT)
static unsigned config_gpio_wl_reg_on[] = {
GPIO_CFG(GPIO_WL_REG_ON, 0, GPIO_CFG_OUTPUT,
GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA) };
#endif /* not defined (CONFIG_SEC_K_PROJECT && CONFIG_SEC_KS01_PROJECT) && CONFIG_SEC_KACTIVE_PROJECT*/
static int brcm_wifi_cd; /* WIFI virtual 'card detect' status */
static void (*wifi_status_cb)(int card_present, void *dev_id);
static void *wifi_status_cb_devid;
static void *wifi_mmc_host;
extern void sdio_ctrl_power(struct mmc_host *card, bool onoff);
static unsigned get_gpio_wl_host_wake(void)
{
unsigned gpio_wl_host_wake;
gpio_wl_host_wake = GPIO_WL_HOST_WAKE;
return gpio_wl_host_wake;
static int __devinit hs_probe(struct platform_device *pdev)
{
int rc = 0,err;
struct input_dev *ipdev;
struct pm8xxx_mpp_config_data sky_handset_digital_adc = {
.type = PM8XXX_MPP_TYPE_D_INPUT,
.level = PM8058_MPP_DIG_LEVEL_S3,
.control = PM8XXX_MPP_DIN_TO_INT,
};
hs_dbg("hs_probe start!!!\n");
headset_init=0;
//sky_hs_3p5pi_jack_ctrl.state=SKY_HS_JACK_STATE_INIT;
hs = kzalloc(sizeof(struct msm_headset), GFP_KERNEL);
if (!hs)
return -ENOMEM;
hspd = kzalloc(sizeof(struct msm_headset_platform_data), GFP_KERNEL);
if (!hspd)
return -ENOMEM;
#if 0
hs->sdev.name = "h2w";
#else
hs->sdev.name = "hw2";
#endif
hs->sdev.print_name = msm_headset_print_name;
rc = switch_dev_register(&hs->sdev);
if (rc)
goto err_switch_dev_register;
ipdev = input_allocate_device();
if (!ipdev) {
rc = -ENOMEM;
goto err_switch_dev;
}
input_set_drvdata(ipdev, hs);
hs->ipdev = ipdev;
if (pdev->dev.platform_data) {
hs->hs_pdata = pdev->dev.platform_data;
hspd = pdev->dev.platform_data;
}
if (hs->hs_pdata->hs_name)
ipdev->name = hs->hs_pdata->hs_name;
else
ipdev->name = DRIVER_NAME;
mutex_init(&headset_adc_lock);
INIT_DELAYED_WORK(&earjack_work,earjack_det_func);
INIT_DELAYED_WORK(&remotekey_work,remotekey_det_func);
wake_lock_init(&headset_wakelock, WAKE_LOCK_SUSPEND, "Headset_wakelock");
ipdev->id.vendor = 0x0001;
ipdev->id.product = 1;
ipdev->id.version = 1;
input_set_capability(ipdev, EV_KEY, KEY_MEDIA);
input_set_capability(ipdev, EV_KEY, KEY_VOLUMEUP);
input_set_capability(ipdev, EV_KEY, KEY_VOLUMEDOWN);
//input_set_capability(ipdev, EV_KEY, KEY_END);
input_set_capability(ipdev, EV_SW, SW_HEADPHONE_INSERT);
//input_set_capability(ipdev, EV_KEY, KEY_POWER);
//input_set_capability(ipdev, EV_KEY, KEY_SEND);
rc = input_register_device(ipdev);
if (rc) {
dev_err(&ipdev->dev,
"hs_probe: input_register_device rc=%d\n", rc);
goto err_reg_wakelock;
}
/* Enable runtime PM ops, start in ACTIVE mode */
//rc = pm_runtime_set_active(&pdev->dev);
//if (rc < 0)
// dev_dbg(&pdev->dev, "unable to set runtime pm state\n");
//pm_runtime_enable(&pdev->dev);
platform_set_drvdata(pdev, hs);
device_init_wakeup(&pdev->dev,1);
hs_jack_l8 = regulator_get(NULL, "8058_l8");
if(IS_ERR(hs_jack_l8)) {
printk("regulator l8 get error\n");
goto err_reg_input_dev;
}
// Added sysfs. (/sys/devices/platform/msm-handset/headset)
rc = sysfs_create_group(&pdev->dev.kobj, &dev_attr_grp);
if (rc) {
dev_err(&ipdev->dev,
"hs_probe: sysfs_create_group rc=%d\n", rc);
goto err_reg_input_dev;
}
err = gpio_request(hspd->ear_det, "headset_det");
if(err) {
printk("unable to request gpio headset_det err=%d\n",err);
goto err_reg_input_dev;
}
err=gpio_direction_input(hspd->ear_det);
if(err) {
printk("Unable to set direction headset_det err=%d\n",err);
goto err_reg_input_dev;
}
#if AT1_BDVER_GE(AT1_WS22)
gpio_tlmm_config(GPIO_CFG(hspd->ear_det, 0, GPIO_CFG_INPUT,GPIO_CFG_NO_PULL, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
#else
gpio_tlmm_config(GPIO_CFG(hspd->ear_det, 0, GPIO_CFG_INPUT,GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
#endif
//gpio_set_debounce(hspd->ear_det,5);
//set_irq_wake(gpio_to_irq(hspd->ear_det),1);
err=request_irq(gpio_to_irq(hspd->ear_det), Earjack_Det_handler,
IRQF_DISABLED|IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "earjack_det-irq", hs);
if (err < 0) {
printk("Couldn't acquire ear_det as request_irq()");
goto err_reg_input_dev;
}
irq_set_irq_wake(gpio_to_irq(hspd->ear_det),1);
err = gpio_request(hspd->remote_det, "remote_det");
if(err) {
printk("unable to request gpio remote_det err=%d\n",err);
goto err_reg_input_dev;
}
#if AT1_BDVER_GE(AT1_WS22)
err = pm8xxx_mpp_config(PM8058_MPP_PM_TO_SYS(XOADC_MPP_3), &sky_handset_digital_adc);
if (err < 0)
printk("%s: pm8058_mpp_config_DIG ret=%d\n",__func__, err);
/*
err = pm8058_mpp_config_digital_in(PM8058_MPP_SYS_TO_PM(hspd->remote_det),
PM8058_MPP_DIG_LEVEL_S3,
PM_MPP_DIN_TO_INT);
err |= pm8058_mpp_config_bi_dir(PM8058_MPP_SYS_TO_PM(hspd->remote_det),
PM8058_MPP_DIG_LEVEL_S3,
PM_MPP_BI_PULLUP_OPEN);
*/
printk("mpp config %d mpp %d err=%d\n",hspd->remote_det,
PM8058_MPP_SYS_TO_PM(hspd->remote_det),err);
printk(" remote %d %d\n",gpio_to_irq(hspd->remote_det),PM8058_MPP_IRQ(PM8058_IRQ_BASE,PM8058_MPP_SYS_TO_PM(hspd->remote_det)));
err=request_threaded_irq(gpio_to_irq(hspd->remote_det),NULL,
Remotekey_Det_handler,IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "remote_det-irq", hs);
#else
err=gpio_direction_input(hspd->remote_det);
if(err) {
printk("Unable to set direction remote_det err=%d\n",err);
goto err_reg_input_dev;
}
//gpio_tlmm_config(GPIO_CFG(hspd->remote_det, 0, GPIO_CFG_INPUT,GPIO_CFG_NO_PULL, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
gpio_tlmm_config(GPIO_CFG(hspd->remote_det, 0, GPIO_CFG_INPUT,GPIO_CFG_PULL_UP, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
//gpio_set_debounce(hspd->remote_det,5);
err=request_irq(gpio_to_irq(hspd->remote_det), Remotekey_Det_handler,
IRQF_DISABLED|IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "remote_det-irq", hs);
#endif
if (err < 0) {
printk("Couldn't acquire remote_det as request_irq()");
goto err_reg_input_dev;
}
disable_irq(gpio_to_irq(hspd->remote_det));
headset_init=1; // headset init
rc=gpio_get_value_cansleep(hspd->ear_det);
if(rc==hspd->ear_det_active) {
schedule_delayed_work(&earjack_work,msecs_to_jiffies(200));
//schedule_delayed_work(&earjack_work,200);
}
printk("hs_probe success!!!\n");
return 0;
err_reg_input_dev:
input_unregister_device(ipdev);
err_reg_wakelock:
wake_lock_destroy(&headset_wakelock);
input_free_device(ipdev);
err_switch_dev:
switch_dev_unregister(&hs->sdev);
err_switch_dev_register:
kfree(hspd);
kfree(hs);
return rc;
}
static int mipi_dsi_panel_qrd3_power(int on)
{
int rc = 0;
if (!qrd3_dsi_gpio_initialized) {
pmapp_disp_backlight_init();
rc = gpio_request(GPIO_QRD3_LCD_BACKLIGHT_EN,
"qrd3_gpio_bkl_en");
if (rc < 0)
return rc;
qrd3_dsi_gpio_initialized = 1;
if (mdp_pdata.cont_splash_enabled) {
rc = gpio_tlmm_config(GPIO_CFG(
GPIO_QRD3_LCD_BACKLIGHT_EN, 0, GPIO_CFG_OUTPUT,
GPIO_CFG_PULL_UP, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
if (rc < 0) {
pr_err("failed QRD3 GPIO_BACKLIGHT_EN tlmm config\n");
return rc;
}
rc = gpio_direction_output(GPIO_QRD3_LCD_BACKLIGHT_EN,
1);
if (rc < 0) {
pr_err("failed to enable backlight\n");
gpio_free(GPIO_QRD3_LCD_BACKLIGHT_EN);
return rc;
}
/*Configure LCD Bridge reset*/
rc = gpio_tlmm_config(qrd3_mipi_dsi_gpio[0],
GPIO_CFG_ENABLE);
if (rc < 0) {
pr_err("Failed to enable LCD Bridge reset enable\n");
return rc;
}
rc = gpio_direction_output(GPIO_QRD3_LCD_BRDG_RESET_N,
1);
if (rc < 0) {
pr_err("Failed GPIO bridge Reset\n");
gpio_free(GPIO_QRD3_LCD_BRDG_RESET_N);
return rc;
}
return 0;
}
}
if (on) {
rc = gpio_tlmm_config(GPIO_CFG(GPIO_QRD3_LCD_BACKLIGHT_EN, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
if (rc < 0) {
pr_err("failed QRD3 GPIO_BACKLIGHT_EN tlmm config\n");
return rc;
}
rc = gpio_direction_output(GPIO_QRD3_LCD_BACKLIGHT_EN, 1);
if (rc < 0) {
pr_err("failed to enable backlight\n");
gpio_free(GPIO_QRD3_LCD_BACKLIGHT_EN);
return rc;
}
/*Toggle Backlight GPIO*/
gpio_set_value_cansleep(GPIO_QRD3_LCD_BACKLIGHT_EN, 1);
udelay(100);
gpio_set_value_cansleep(GPIO_QRD3_LCD_BACKLIGHT_EN, 0);
udelay(430);
gpio_set_value_cansleep(GPIO_QRD3_LCD_BACKLIGHT_EN, 1);
/* 1 wire mode starts from this low to high transition */
udelay(50);
/*Enable EXT_2.85 and 1.8 regulators*/
rc = regulator_enable(gpio_reg_2p85v);
if (rc < 0)
pr_err("%s: reg enable failed\n", __func__);
rc = regulator_enable(gpio_reg_1p8v);
if (rc < 0)
pr_err("%s: reg enable failed\n", __func__);
/*Configure LCD Bridge reset*/
rc = gpio_tlmm_config(qrd3_mipi_dsi_gpio[0], GPIO_CFG_ENABLE);
if (rc < 0) {
pr_err("Failed to enable LCD Bridge reset enable\n");
return rc;
}
rc = gpio_direction_output(GPIO_QRD3_LCD_BRDG_RESET_N, 1);
if (rc < 0) {
pr_err("Failed GPIO bridge Reset\n");
gpio_free(GPIO_QRD3_LCD_BRDG_RESET_N);
return rc;
}
/*Toggle Bridge Reset GPIO*/
msleep(20);
gpio_set_value_cansleep(GPIO_QRD3_LCD_BRDG_RESET_N, 0);
msleep(20);
gpio_set_value_cansleep(GPIO_QRD3_LCD_BRDG_RESET_N, 1);
msleep(20);
} else {
gpio_tlmm_config(GPIO_CFG(GPIO_QRD3_LCD_BACKLIGHT_EN, 0,
GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
GPIO_CFG_DISABLE);
gpio_tlmm_config(GPIO_CFG(GPIO_QRD3_LCD_BRDG_RESET_N, 0,
GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
GPIO_CFG_DISABLE);
rc = regulator_disable(gpio_reg_2p85v);
if (rc < 0)
pr_err("%s: reg disable failed\n", __func__);
rc = regulator_disable(gpio_reg_1p8v);
if (rc < 0)
pr_err("%s: reg disable failed\n", __func__);
}
return rc;
}
static int __devinit pmic8xxx_kp_probe(struct platform_device *pdev)
{
const struct pm8xxx_keypad_platform_data *pdata =
dev_get_platdata(&pdev->dev);
const struct matrix_keymap_data *keymap_data;
struct pmic8xxx_kp *kp;
int rc;
u8 ctrl_val;
struct device *sec_key;
struct pm_gpio kypd_drv = {
.direction = PM_GPIO_DIR_OUT,
.output_buffer = PM_GPIO_OUT_BUF_OPEN_DRAIN,
.output_value = 0,
.pull = PM_GPIO_PULL_NO,
.vin_sel = PM_GPIO_VIN_S4,
.out_strength = PM_GPIO_STRENGTH_LOW,
.function = PM_GPIO_FUNC_1,
.inv_int_pol = 1,
};
struct pm_gpio kypd_sns = {
.direction = PM_GPIO_DIR_IN,
.pull = PM_GPIO_PULL_UP_31P5,
.vin_sel = PM_GPIO_VIN_S4,
.out_strength = PM_GPIO_STRENGTH_NO,
.function = PM_GPIO_FUNC_NORMAL,
.inv_int_pol = 1,
};
if (!pdata || !pdata->num_cols || !pdata->num_rows ||
pdata->num_cols > PM8XXX_MAX_COLS ||
pdata->num_rows > PM8XXX_MAX_ROWS ||
pdata->num_cols < PM8XXX_MIN_COLS) {
dev_err(&pdev->dev, "invalid platform data\n");
return -EINVAL;
}
if (!pdata->scan_delay_ms ||
pdata->scan_delay_ms > MAX_SCAN_DELAY ||
pdata->scan_delay_ms < MIN_SCAN_DELAY ||
!is_power_of_2(pdata->scan_delay_ms)) {
dev_err(&pdev->dev, "invalid keypad scan time supplied\n");
return -EINVAL;
}
if (!pdata->row_hold_ns ||
pdata->row_hold_ns > MAX_ROW_HOLD_DELAY ||
pdata->row_hold_ns < MIN_ROW_HOLD_DELAY ||
((pdata->row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) {
dev_err(&pdev->dev, "invalid keypad row hold time supplied\n");
return -EINVAL;
}
if (!pdata->debounce_ms ||
((pdata->debounce_ms % 5) != 0) ||
pdata->debounce_ms > MAX_DEBOUNCE_TIME ||
pdata->debounce_ms < MIN_DEBOUNCE_TIME) {
dev_err(&pdev->dev, "invalid debounce time supplied\n");
return -EINVAL;
}
keymap_data = pdata->keymap_data;
if (!keymap_data) {
dev_err(&pdev->dev, "no keymap data supplied\n");
return -EINVAL;
}
kp = kzalloc(sizeof(*kp), GFP_KERNEL);
if (!kp)
return -ENOMEM;
platform_set_drvdata(pdev, kp);
kp->pdata = pdata;
kp->dev = &pdev->dev;
kp->input = input_allocate_device();
if (!kp->input) {
dev_err(&pdev->dev, "unable to allocate input device\n");
rc = -ENOMEM;
goto err_alloc_device;
}
kp->key_sense_irq = platform_get_irq(pdev, 0);
if (kp->key_sense_irq < 0) {
dev_err(&pdev->dev, "unable to get keypad sense irq\n");
rc = -ENXIO;
goto err_get_irq;
}
kp->key_stuck_irq = platform_get_irq(pdev, 1);
if (kp->key_stuck_irq < 0) {
dev_err(&pdev->dev, "unable to get keypad stuck irq\n");
rc = -ENXIO;
goto err_get_irq;
}
kp->input->name = pdata->input_name ? : "PMIC8XXX keypad";
kp->input->phys = pdata->input_phys_device ? : "pmic8xxx_keypad/input0";
kp->input->dev.parent = &pdev->dev;
kp->input->id.bustype = BUS_I2C;
kp->input->id.version = 0x0001;
kp->input->id.product = 0x0001;
kp->input->id.vendor = 0x0001;
kp->input->evbit[0] = BIT_MASK(EV_KEY);
if (pdata->rep)
__set_bit(EV_REP, kp->input->evbit);
kp->input->keycode = kp->keycodes;
kp->input->keycodemax = PM8XXX_MATRIX_MAX_SIZE;
kp->input->keycodesize = sizeof(kp->keycodes);
kp->input->open = pmic8xxx_kp_open;
kp->input->close = pmic8xxx_kp_close;
matrix_keypad_build_keymap(keymap_data, PM8XXX_ROW_SHIFT,
kp->input->keycode, kp->input->keybit);
get_volumekey_matrix(keymap_data,
&volup_matrix, &voldown_matrix);
input_set_capability(kp->input, EV_MSC, MSC_SCAN);
input_set_drvdata(kp->input, kp);
/* initialize keypad state */
memset(kp->keystate, 0xff, sizeof(kp->keystate));
memset(kp->stuckstate, 0xff, sizeof(kp->stuckstate));
rc = pmic8xxx_kpd_init(kp);
if (rc < 0) {
dev_err(&pdev->dev, "unable to initialize keypad controller\n");
goto err_get_irq;
}
rc = pmic8xxx_kp_config_gpio(pdata->cols_gpio_start,
pdata->num_cols, kp, &kypd_sns);
if (rc < 0) {
dev_err(&pdev->dev, "unable to configure keypad sense lines\n");
goto err_gpio_config;
}
rc = pmic8xxx_kp_config_gpio(pdata->rows_gpio_start,
pdata->num_rows, kp, &kypd_drv);
if (rc < 0) {
dev_err(&pdev->dev, "unable to configure keypad drive lines\n");
goto err_gpio_config;
}
rc = request_any_context_irq(kp->key_sense_irq, pmic8xxx_kp_irq,
IRQF_TRIGGER_RISING, "pmic-keypad", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request keypad sense irq\n");
goto err_get_irq;
}
rc = request_any_context_irq(kp->key_stuck_irq, pmic8xxx_kp_stuck_irq,
IRQF_TRIGGER_RISING, "pmic-keypad-stuck", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request keypad stuck irq\n");
goto err_req_stuck_irq;
}
rc = pmic8xxx_kp_read_u8(kp, &ctrl_val, KEYP_CTRL);
if (rc < 0) {
dev_err(&pdev->dev, "failed to read KEYP_CTRL register\n");
goto err_pmic_reg_read;
}
rc = request_threaded_irq(MSM_GPIO_KEY_VOLUP_IRQ ,
NULL, pmic8058_volume_up_irq, IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING, "vol_up", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request vol_up irq\n");
goto err_req_sense_irq;
}
rc = request_threaded_irq(MSM_GPIO_KEY_VOLDOWN_IRQ ,
NULL, pmic8058_volume_down_irq, IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING, "vol_down", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request vol_down irq\n");
goto err_req_sense_irq;
}
kp->ctrl_reg = ctrl_val;
#if defined CONFIG_MACH_VITAL2REFRESH
gpio_tlmm_config(GPIO_CFG(MSM_HALL_IC, 1, GPIO_CFG_INPUT,
GPIO_CFG_NO_PULL, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
input_set_capability(kp->input, EV_SW, SW_LID);
if (gpio_get_value(MSM_HALL_IC)) {
input_report_switch(kp->input, SW_LID, 1);
}
else {
input_report_switch(kp->input, SW_LID, 0);
}
input_sync(kp->input);
printk(KERN_INFO "[input_report_switch] slide_int - !gpio_hall_ic %s\n",
gpio_get_value(MSM_HALL_IC) == 0 ? "OPEN" : "CLOSE");
rc = request_threaded_irq(MSM_GPIO_TO_INT(MSM_HALL_IC), NULL,
hall_ic_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"hall_ic", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request hall_ic irq\n");
goto err_hall_ic_irq;
}
#endif
rc = input_register_device(kp->input);
if (rc < 0) {
dev_err(&pdev->dev, "unable to register keypad input device\n");
goto err_pmic_reg_read;
}
sec_key = device_create(sec_class, NULL, 0, NULL, "sec_key");
if (IS_ERR(sec_key))
pr_err("Failed to create device(sec_key)!\n");
rc = device_create_file(sec_key, &dev_attr_sec_key_pressed);
if (rc) {
pr_err("Failed to create device file - pressed(%s), err(%d)!\n",
dev_attr_sec_key_pressed.attr.name, rc);
}
dev_set_drvdata(sec_key, kp);
device_init_wakeup(&pdev->dev, pdata->wakeup);
return 0;
err_pmic_reg_read:
free_irq(kp->key_stuck_irq, kp);
err_req_stuck_irq:
free_irq(kp->key_sense_irq, kp);
#if defined CONFIG_MACH_VITAL2REFRESH
err_hall_ic_irq:
#endif
err_req_sense_irq:
err_gpio_config:
err_get_irq:
input_free_device(kp->input);
err_alloc_device:
platform_set_drvdata(pdev, NULL);
kfree(kp);
return rc;
}
static int __devexit pmic8xxx_kp_remove(struct platform_device *pdev)
{
struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
device_init_wakeup(&pdev->dev, 0);
free_irq(kp->key_stuck_irq, kp);
free_irq(kp->key_sense_irq, kp);
input_unregister_device(kp->input);
kfree(kp);
platform_set_drvdata(pdev, NULL);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int pmic8xxx_kp_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
struct input_dev *input_dev = kp->input;
if (device_may_wakeup(dev)) {
enable_irq_wake(kp->key_sense_irq);
} else {
mutex_lock(&input_dev->mutex);
#if defined CONFIG_MACH_VITAL2REFRESH
enable_irq_wake(MSM_GPIO_TO_INT(MSM_HALL_IC));
/* to wakeup in case of sleep */
#endif
if (input_dev->users)
pmic8xxx_kp_disable(kp);
mutex_unlock(&input_dev->mutex);
}
return 0;
}
static int pmic8xxx_kp_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
struct input_dev *input_dev = kp->input;
if (device_may_wakeup(dev)) {
disable_irq_wake(kp->key_sense_irq);
} else {
mutex_lock(&input_dev->mutex);
#if defined CONFIG_MACH_VITAL2REFRESH
disable_irq_wake(MSM_GPIO_TO_INT(MSM_HALL_IC)); /* to match irq pair */
#endif
if (input_dev->users)
pmic8xxx_kp_enable(kp);
mutex_unlock(&input_dev->mutex);
}
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(pm8xxx_kp_pm_ops,
pmic8xxx_kp_suspend, pmic8xxx_kp_resume);
static struct platform_driver pmic8xxx_kp_driver = {
.probe = pmic8xxx_kp_probe,
.remove = __devexit_p(pmic8xxx_kp_remove),
.driver = {
.name = PM8XXX_KEYPAD_DEV_NAME,
.owner = THIS_MODULE,
.pm = &pm8xxx_kp_pm_ops,
},
};
static int __init pmic8xxx_kp_init(void)
{
return platform_driver_register(&pmic8xxx_kp_driver);
}
module_init(pmic8xxx_kp_init);
static void __exit pmic8xxx_kp_exit(void)
{
platform_driver_unregister(&pmic8xxx_kp_driver);
}
module_exit(pmic8xxx_kp_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("PMIC8XXX keypad driver");
MODULE_VERSION("1.0");
MODULE_ALIAS("platform:pmic8xxx_keypad");
MODULE_AUTHOR("Trilok Soni <*****@*****.**>");
static int mipi_dsi_power_tft_request(void)
{
int rc = 0;
#if defined(CONFIG_MACH_JACTIVE_ATT)
if (system_rev < 10){
gpio33 = PM8921_GPIO_PM_TO_SYS(LCD_22V_EN);
rc = gpio_request(gpio33, "led_dirver");
if (rc) {
pr_err("request gpio lcd_22v_en failed, rc=%d\n", rc);
return -ENODEV;
}
rc = pm8xxx_gpio_config(gpio33, &gpio43_param);
if (rc) {
pr_err("gpio_config lcd_22v_en failed (3), rc=%d\n", rc);
return -EINVAL;
}
}
else{
pr_info("[lcd] request gpio lcd_22v_en\n");
rc = gpio_request(LCD_22V_EN, "lcd_22v_en");
if (rc) {
gpio_free(LCD_22V_EN);
rc = gpio_request(LCD_22V_EN, "lcd_22v_en");
if(rc){
pr_err("request gpio lcd_22v_en failed, rc=%d\n", rc);
return -ENODEV;
}
}
pr_info("[lcd] configure LCD_22V_EN\n");
gpio_tlmm_config(GPIO_CFG(LCD_22V_EN, 0, GPIO_CFG_OUTPUT,
GPIO_CFG_NO_PULL, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
}
#else
pr_info("[lcd] request gpio lcd_22v_en\n");
rc = gpio_request(LCD_22V_EN, "lcd_22v_en");
if (rc) {
pr_err("request gpio lcd_22v_en failed, rc=%d\n", rc);
return -ENODEV;
}
pr_info("[lcd] configure LCD_22V_EN\n");
gpio_tlmm_config(GPIO_CFG(LCD_22V_EN, 0, GPIO_CFG_OUTPUT,
GPIO_CFG_NO_PULL, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
#if defined(CONFIG_FB_MSM_ENABLE_LCD_EN2)
if( system_rev >= 16 ) // rev0.6 + 10
{
pr_info("[lcd] request gpio lcd_22v_en_2\n");
rc = gpio_request(LCD_22V_EN_2, "lcd_22v_en_2");
if (rc) {
pr_err("request gpio lcd_22v_en_2 failed, rc=%d\n", rc);
return -ENODEV;
}
pr_info("[lcd] configure LCD_22V_EN_2\n");
gpio_tlmm_config(GPIO_CFG(LCD_22V_EN_2, 0, GPIO_CFG_OUTPUT,
GPIO_CFG_NO_PULL, GPIO_CFG_2MA), GPIO_CFG_ENABLE);
}
#endif
#endif
if (system_rev == 0) {
gpio43 = PM8921_GPIO_PM_TO_SYS(
PMIC_GPIO_LCD_RST);
rc = gpio_request(gpio43, "mlcd_rst");
if (rc) {
pr_err("request gpio mlcd_rst failed, rc=%d\n", rc);
return -ENODEV;
}
rc = pm8xxx_gpio_config(gpio43, &gpio43_param);
if (rc) {
pr_err("gpio_config mlcd_rst failed (3), rc=%d\n", rc);
return -EINVAL;
}
}
#if defined(CONFIG_MACH_JACTIVE_ATT)
if (system_rev < 10)
gpio27 = PM8921_GPIO_PM_TO_SYS(PMIC_GPIO_LED_DRIVER_REV00);
else
gpio27 = PM8921_GPIO_PM_TO_SYS(PMIC_GPIO_LED_DRIVER_REV10);
#else
gpio27 = PM8921_GPIO_PM_TO_SYS(PMIC_GPIO_LED_DRIVER);
#endif
rc = gpio_request(gpio27, "led_dirver");
if (rc) {
pr_err("request gpio led_dirver failed, rc=%d\n", rc);
return -ENODEV;
}
rc = pm8xxx_gpio_config(gpio27, &gpio43_param);
if (rc) {
pr_err("gpio_config led_dirver failed (3), rc=%d\n", rc);
return -EINVAL;
}
#if !defined(CONFIG_MACH_JACTIVE_ATT) && !defined(CONFIG_MACH_JACTIVE_EUR)
#if defined(CONFIG_MACH_JACTIVE_ATT)
if(system_rev < 10)
gpio_direction_output(gpio33, 0);
else
gpio_direction_output(LCD_22V_EN, 0);
#else
gpio_direction_output(LCD_22V_EN, 0);
#endif
if (system_rev == 0)
gpio_direction_output(gpio43, 0);
else
pm8xxx_mpp_config(
PM8921_MPP_PM_TO_SYS(MLCD_RST_MPP2),
&MLCD_RESET_LOW_CONFIG);
msleep(1000);
#endif
gpio_direction_output(gpio27, 0);
return rc;
}
int dout;
int din;
int syncout;
int clkin_a;
};
static struct aux_pcm_state the_aux_pcm_state;
static void __iomem *get_base_addr(struct aux_pcm_state *aux_pcm)
{
return aux_pcm->aux_pcm_base;
}
#ifdef CONFIG_SH_AUDIO_DRIVER
static unsigned aux_pcm_gpio_on[] = {
#if (CONFIG_SH_AUDIO_DRIVER_MODEL_NUMBER == 302)||(CONFIG_SH_AUDIO_DRIVER_MODEL_NUMBER == 303)||(CONFIG_SH_AUDIO_DRIVER_MODEL_NUMBER == 304)
GPIO_CFG(138, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_8MA),
GPIO_CFG(139, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
GPIO_CFG(140, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_8MA),
GPIO_CFG(141, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_8MA),
#else
GPIO_CFG(138, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_6MA),
GPIO_CFG(139, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
GPIO_CFG(140, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_6MA),
GPIO_CFG(141, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_6MA),
#endif /* CONFIG_SH_AUDIO_DRIVER_MODEL_NUMBER */
};
static int aux_pcm_gpios_enable(void)
{
int pin, rc;
static int mipi_dsi_on(struct platform_device *pdev)
{
int ret = 0;
u32 clk_rate;
struct msm_fb_data_type *mfd;
struct fb_info *fbi;
struct fb_var_screeninfo *var;
struct msm_panel_info *pinfo;
struct mipi_panel_info *mipi;
u32 hbp, hfp, vbp, vfp, hspw, vspw, width, height;
u32 ystride, bpp, data;
u32 dummy_xres, dummy_yres;
int target_type = 0;
u32 tmp;
pr_debug("%s+:\n", __func__);
#if defined(CONFIG_ESD_ERR_FG_RECOVERY)
pdev_for_esd = pdev;
#endif
mfd = platform_get_drvdata(pdev);
fbi = mfd->fbi;
var = &fbi->var;
pinfo = &mfd->panel_info;
esc_byte_ratio = pinfo->mipi.esc_byte_ratio;
if (mipi_dsi_pdata && mipi_dsi_pdata->power_common)
mipi_dsi_pdata->power_common();
#if defined(CONFIG_SUPPORT_SECOND_POWER)
if (mipi_dsi_pdata && mipi_dsi_pdata->panel_power_save)
mipi_dsi_pdata->panel_power_save(1);
#endif
if (system_rev == 6)
mdelay(500);
if (mipi_dsi_pdata && mipi_dsi_pdata->dsi_power_save)
mipi_dsi_pdata->dsi_power_save(1);
cont_splash_clk_ctrl(0);
mipi_dsi_prepare_clocks();
mipi_dsi_ahb_ctrl(1);
clk_rate = mfd->fbi->var.pixclock;
clk_rate = min(clk_rate, mfd->panel_info.clk_max);
mipi_dsi_phy_ctrl(1);
if (mdp_rev == MDP_REV_42 && mipi_dsi_pdata)
target_type = mipi_dsi_pdata->target_type;
mipi_dsi_phy_init(0, &(mfd->panel_info), target_type);
mipi_dsi_clk_enable();
MIPI_OUTP(MIPI_DSI_BASE + 0x114, 1);
MIPI_OUTP(MIPI_DSI_BASE + 0x114, 0);
hbp = var->left_margin;
hfp = var->right_margin;
vbp = var->upper_margin;
vfp = var->lower_margin;
hspw = var->hsync_len;
vspw = var->vsync_len;
width = mfd->panel_info.xres;
height = mfd->panel_info.yres;
mipi = &mfd->panel_info.mipi;
if (mfd->panel_info.type == MIPI_VIDEO_PANEL) {
dummy_xres = mfd->panel_info.lcdc.xres_pad;
dummy_yres = mfd->panel_info.lcdc.yres_pad;
if (mdp_rev >= MDP_REV_41) {
MIPI_OUTP(MIPI_DSI_BASE + 0x20,
((hspw + hbp + width + dummy_xres) << 16 |
(hspw + hbp)));
MIPI_OUTP(MIPI_DSI_BASE + 0x24,
((vspw + vbp + height + dummy_yres) << 16 |
(vspw + vbp)));
MIPI_OUTP(MIPI_DSI_BASE + 0x28,
(vspw + vbp + height + dummy_yres +
vfp - 1) << 16 | (hspw + hbp +
width + dummy_xres + hfp - 1));
} else {
/* DSI_LAN_SWAP_CTRL */
MIPI_OUTP(MIPI_DSI_BASE + 0x00ac, mipi->dlane_swap);
MIPI_OUTP(MIPI_DSI_BASE + 0x20,
((hbp + width + dummy_xres) << 16 | (hbp)));
MIPI_OUTP(MIPI_DSI_BASE + 0x24,
((vbp + height + dummy_yres) << 16 | (vbp)));
MIPI_OUTP(MIPI_DSI_BASE + 0x28,
(vbp + height + dummy_yres + vfp) << 16 |
(hbp + width + dummy_xres + hfp));
}
MIPI_OUTP(MIPI_DSI_BASE + 0x2c, (hspw << 16));
MIPI_OUTP(MIPI_DSI_BASE + 0x30, 0);
MIPI_OUTP(MIPI_DSI_BASE + 0x34, (vspw << 16));
} else { /* command mode */
if (mipi->dst_format == DSI_CMD_DST_FORMAT_RGB888)
bpp = 3;
else if (mipi->dst_format == DSI_CMD_DST_FORMAT_RGB666)
bpp = 3;
else if (mipi->dst_format == DSI_CMD_DST_FORMAT_RGB565)
bpp = 2;
else
bpp = 3; /* Default format set to RGB888 */
ystride = width * bpp + 1;
/* DSI_COMMAND_MODE_MDP_STREAM_CTRL */
data = (ystride << 16) | (mipi->vc << 8) | DTYPE_DCS_LWRITE;
MIPI_OUTP(MIPI_DSI_BASE + 0x5c, data);
MIPI_OUTP(MIPI_DSI_BASE + 0x54, data);
/* DSI_COMMAND_MODE_MDP_STREAM_TOTAL */
data = height << 16 | width;
MIPI_OUTP(MIPI_DSI_BASE + 0x60, data);
MIPI_OUTP(MIPI_DSI_BASE + 0x58, data);
}
mipi_dsi_host_init(mipi);
msleep(10);
/* LP11 */
tmp = MIPI_INP(MIPI_DSI_BASE + 0xA8);
tmp &= ~(1<<28);
MIPI_OUTP(MIPI_DSI_BASE + 0xA8, tmp);
wmb();
/* LP11 */
usleep(5000);
if (mipi_dsi_pdata && mipi_dsi_pdata->active_reset)
mipi_dsi_pdata->active_reset(1); /* high */
usleep(10000);
/* always high */
if (mipi->force_clk_lane_hs) {
tmp = MIPI_INP(MIPI_DSI_BASE + 0xA8);
tmp |= (1<<28);
MIPI_OUTP(MIPI_DSI_BASE + 0xA8, tmp);
wmb();
}
if (mdp_rev >= MDP_REV_41)
mutex_lock(&mfd->dma->ov_mutex);
else
down(&mfd->dma->mutex);
ret = panel_next_on(pdev);
mipi_dsi_op_mode_config(mipi->mode);
if (mfd->panel_info.type == MIPI_CMD_PANEL) {
if (pinfo->lcd.vsync_enable) {
if (pinfo->lcd.hw_vsync_mode && vsync_gpio >= 0) {
if (mdp_rev >= MDP_REV_41) {
if (gpio_request(vsync_gpio,
"MDP_VSYNC") == 0)
gpio_direction_input(
vsync_gpio);
else
pr_err("%s: unable to \
request gpio=%d\n",
__func__, vsync_gpio);
} else if (mdp_rev == MDP_REV_303) {
if (!tlmm_settings && gpio_request(
vsync_gpio, "MDP_VSYNC") == 0) {
ret = gpio_tlmm_config(
GPIO_CFG(
vsync_gpio, 1,
GPIO_CFG_INPUT,
GPIO_CFG_PULL_DOWN,
GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
if (ret) {
pr_err(
"%s: unable to config \
tlmm = %d\n",
__func__, vsync_gpio);
}
tlmm_settings = TRUE;
gpio_direction_input(
vsync_gpio);
} else {
if (!tlmm_settings) {
pr_err(
"%s: unable to request \
gpio=%d\n",
__func__, vsync_gpio);
}
}
}
static int sec_switch_probe(struct platform_device *pdev)
{
struct sec_switch_struct *secsw;
struct sec_switch_platform_data *pdata = pdev->dev.platform_data;
struct sec_switch_wq *wq;
pr_err("sec_switch_probe enter %s\n", __func__);
if (!pdata) {
pr_err("%s : pdata is NULL.\n", __func__);
return -ENODEV;
}
secsw = kzalloc(sizeof(struct sec_switch_struct), GFP_KERNEL);
if (!secsw) {
pr_err("%s : failed to allocate memory\n", __func__);
return -ENOMEM;
}
secsw->pdata = pdata;
secsw->switch_sel = 1; /* UART_SEL default to MDM9K */
secsw->is_manualset= 0;
dev_set_drvdata(switch_dev, secsw);
/* Initializing GPIO for control */
gpio_request(UART_SEL_SW, "uart_sel");
gpio_tlmm_config(GPIO_CFG(UART_SEL_SW, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), 1);
/* create sysfs files */
if (device_create_file(switch_dev, &dev_attr_uart_sel) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_uart_sel.attr.name);
if (device_create_file(switch_dev, &dev_attr_usb_state) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_usb_state.attr.name);
if (device_create_file(switch_dev, &dev_attr_usb_sel) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_usb_sel.attr.name);
#if 0 /* NOT USED */
if (device_create_file(switch_dev, &dev_attr_disable_vbus) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_usb_state.attr.name);
if (device_create_file(switch_dev, &dev_attr_device_type) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_device_type.attr.name);
#endif
#ifdef _SEC_DM_
usb_lock = device_create(sec_class, switch_dev, MKDEV(0, 0), NULL, ".usb_lock");
if (IS_ERR(usb_lock)) {
pr_err("Failed to create device (usb_lock)!\n");
return PTR_ERR(usb_lock);
}
dev_set_drvdata(usb_lock, secsw);
if (device_create_file(usb_lock, &dev_attr_enable) < 0) {
pr_err("Failed to create device file(%s)!\n", dev_attr_enable.attr.name);
device_destroy((struct class *)usb_lock, MKDEV(0, 0));
}
