void IngameWindow::MouseLeftUp(const MouseCoords& mc) { // Bewegung stoppen isMoving = false; // beiden Buttons oben links und rechts prfen const Rect rec[2] = { GetLeftButtonRect(), GetRightButtonRect() }; for(unsigned i = 0; i < 2; ++i) { button_state[i] = BUTTON_UP; if(Coll(mc.x, mc.y, rec[i])) { if(i == 0 && (!IsModal() || closeOnRightClick_)) Close(); else if(i==1 && !IsModal()) { SetMinimized(!IsMinimized()); LOADER.GetSoundN("sound", 113)->Play(255, false); } } } }
void dlgSearchObject::OnCancel(wxCommandEvent &ev) { if (IsModal()) EndModal(wxID_CANCEL); else Destroy(); }
void pgDialog::OnCancel(wxCommandEvent &ev) { if (IsModal()) EndModal(wxID_CANCEL); else Destroy(); }
void pgDialog::OnClose(wxCloseEvent &event) { if (IsModal()) EndModal(wxID_CANCEL); else Destroy(); }
void DlgSaveLayout::OnOkClick( wxCommandEvent& event ) { if(!m_ComboLayout->GetValue().IsEmpty()) { if(bSave) { wxMainFrame::Get()->AddLayout(m_ComboLayout->GetValue()); } else { wxMainFrame::Get()->RemoveLayout(m_ComboLayout->GetValue()); } if ( IsModal() ) EndModal(wxID_OK); // If modal else { SetReturnCode(wxID_OK); this->Show(false); // If modeless } } else { wxMessageBox(wxT("You must enter a layout name"), wxT("Error")); } }
void DIALOG_DRC_CONTROL::OnLeftDClickClearance( wxMouseEvent& event ) { event.Skip(); // I am assuming that the double click actually changed the selected item. // please verify this. int selection = m_ClearanceListBox->GetSelection(); if( selection != wxNOT_FOUND ) { // Find the selected MARKER in the PCB, position cursor there. // Then close the dialog. const DRC_ITEM* item = m_ClearanceListBox->GetItem( selection ); if( item ) { m_brdEditor->CursorGoto( item->GetPointA() ); m_brdEditor->GetGalCanvas()->GetView()->SetCenter( VECTOR2D( item->GetPointA() ) ); if( !IsModal() ) { // turn control over to m_brdEditor, hide this DIALOG_DRC_CONTROL window, // no destruction so we can preserve listbox cursor Show( false ); // We do not want the clarification popup window. // when releasing the left button in the main window m_brdEditor->SkipNextLeftButtonReleaseEvent(); } } } }
int wxDialog::ShowModal() { if ( IsModal() ) { wxFAIL_MSG( wxT("wxDialog:ShowModal called twice") ); return GetReturnCode(); } // use the apps top level window as parent if none given unless explicitly // forbidden wxWindow * const parent = GetParentForModalDialog(); if ( parent && parent != this ) { m_parent = parent; } Show(true); m_isShowingModal = true; wxASSERT_MSG( !m_windowDisabler, wxT("disabling windows twice?") ); #if defined(__WXGTK__) || defined(__WXMGL__) wxBusyCursorSuspender suspender; // FIXME (FIXME_MGL) - make sure busy cursor disappears under MSW too #endif m_windowDisabler = new wxWindowDisabler(this); if ( !m_eventLoop ) m_eventLoop = new wxEventLoop; m_eventLoop->Run(); return GetReturnCode(); }
void DIALOG_DRC_CONTROL::OnLeftDClickUnconnected( wxMouseEvent& event ) { event.Skip(); // I am assuming that the double click actually changed the selected item. // please verify this. int selection = m_UnconnectedListBox->GetSelection(); if( selection != wxNOT_FOUND ) { // Find the selected DRC_ITEM in the listbox, position cursor there, // at the first of the two pads. // Then hide the dialog. const DRC_ITEM* item = m_UnconnectedListBox->GetItem( selection ); if( item ) { m_brdEditor->CursorGoto( item->GetPointA() ); m_brdEditor->GetGalCanvas()->GetView()->SetCenter( VECTOR2D( item->GetPointA() ) ); if( !IsModal() ) { Show( false ); // We do not want the clarification popup window. // when releasing the left button in the main window m_brdEditor->SkipNextLeftButtonReleaseEvent(); } } } }
void frmExport::OnCancel(wxCommandEvent &ev) { if (IsModal()) EndModal(wxID_CANCEL); else Destroy(); }
bool wxDialog::Show(bool show) { if ( !wxDialogBase::Show(show) ) { // nothing to do return FALSE; } if ( show ) { // usually will result in TransferDataToWindow() being called InitDialog(); } if ( IsModal() ) { if ( show ) { DoShowModal(); } else // end of modal dialog { // this will cause IsModalShowing() return FALSE and our local // message loop will terminate wxModalDialogs.DeleteObject(this); } } return TRUE; }
void wxDialogBase::EndDialog(int rc) { if ( IsModal() ) EndModal(rc); else Hide(); }
void DIALOG_CLEANUP_TRACKS_AND_VIAS::OnLeftDClickItem( wxMouseEvent& event ) { event.Skip(); int selection = m_ItemsListBox->GetSelection(); if( selection != wxNOT_FOUND ) { // Find the selected DRC_ITEM in the listbox, position cursor there. // Then hide the dialog. const DRC_ITEM* item = m_ItemsListBox->GetItem( selection ); if( item ) { m_parentFrame->FocusOnLocation( item->GetPointA(), true, true ); if( !IsModal() ) { Show( false ); // We do not want the clarify selection popup when releasing the // left button in the main window m_parentFrame->SkipNextLeftButtonReleaseEvent(); } } } }
void tmwxOptimizerDialog::DoStartModal() { /* CAF - essentially lifted from wxGTK 2.5.1's wxDialog::ShowModal, up to grabbing the focus. */ if (IsModal()) { wxFAIL_MSG( wxT("wxDialog:ShowModal called twice") ); mStatus = GetReturnCode(); return; } // use the apps top level window as parent if none given unless explicitly // forbidden if (! GetParent() && !(GetWindowStyleFlag() & wxDIALOG_NO_PARENT)) { wxWindow *parent = wxTheApp->GetTopWindow(); if (parent && parent != this && parent -> IsBeingDeleted() && ! (parent->GetExtraStyle() & wxWS_EX_TRANSIENT)) { m_parent = parent; gtk_window_set_transient_for (GTK_WINDOW(m_widget), GTK_WINDOW(parent->m_widget) ); } } wxBeginBusyCursor (); Show (true); SetFocus(); m_modalShowing = true; g_openDialogs++; gtk_grab_add (m_widget); }
int wxDialog::ShowModal() { WX_TESTING_SHOW_MODAL_HOOK(); wxASSERT_MSG( !IsModal(), "ShowModal() can't be called twice" ); // release the mouse if it's currently captured as the window having it // will be disabled when this dialog is shown -- but will still keep the // capture making it impossible to do anything in the modal dialog itself wxWindow * const win = wxWindow::GetCapture(); if ( win ) win->GTKReleaseMouseAndNotify(); wxWindow * const parent = GetParentForModalDialog(); if ( parent ) { gtk_window_set_transient_for( GTK_WINDOW(m_widget), GTK_WINDOW(parent->m_widget) ); } wxBusyCursorSuspender cs; // temporarily suppress the busy cursor #if GTK_CHECK_VERSION(2,10,0) unsigned sigId = 0; gulong hookId = 0; #ifndef __WXGTK3__ // Ubuntu overlay scrollbar uses at least GTK 2.24 if (gtk_check_version(2,24,0) == NULL) #endif { sigId = g_signal_lookup("realize", GTK_TYPE_WIDGET); hookId = g_signal_add_emission_hook(sigId, 0, realize_hook, NULL, NULL); } #endif Show( true ); m_modalShowing = true; wxOpenModalDialogLocker modalLock; // NOTE: gtk_window_set_modal internally calls gtk_grab_add() ! gtk_window_set_modal(GTK_WINDOW(m_widget), TRUE); // Run modal dialog event loop. { wxGUIEventLoopTiedPtr modal(&m_modalLoop, new wxGUIEventLoop()); m_modalLoop->Run(); } #if GTK_CHECK_VERSION(2,10,0) if (sigId) g_signal_remove_emission_hook(sigId, hookId); #endif gtk_window_set_modal(GTK_WINDOW(m_widget), FALSE); return GetReturnCode(); }
void ParamEdit::Close() { if (IsModal()) EndModal(wxID_OK); else { SetReturnCode(wxID_OK); Show(false); } }
void CustomMessageBox::CloseDialog() { if (IsModal()) { EndModal(wxID_NO); } else { Close(false); } }
void wxGenericAboutDialog::OnCloseWindow(wxCloseEvent& event) { // safeguards in case the window is still shown using ShowModal if ( !IsModal() ) Destroy(); event.Skip(); }
void wxDialog::EndModal(int retCode) { wxASSERT_MSG( IsModal(), wxT("EndModal() called for non modal dialog") ); SetReturnCode(retCode); Hide(); }
void ParamEdit::OnCancel(wxCommandEvent & event) { if (IsModal()) EndModal(wxID_CANCEL); else { SetReturnCode(wxID_CANCEL); Show(false); } }
void WeatherFaxWizard::OnWizardPageChanged( wxWizardEvent& event ) { if(event.GetPage() == m_pages[1]) { if(!event.GetDirection()) { /* if we backed up, convert the mapped coordinates back to the input */ double x1, y1, mx1, my1; double x2, y2, mx2, my2; x1 = m_sCoord1X->GetValue(), y1 = m_sCoord1Y->GetValue(); x2 = m_sCoord2X->GetValue(), y2 = m_sCoord2Y->GetValue(); m_wfimg.MercatorToInput(x1, y1, mx1, my1); m_sCoord1XUnMapped->SetValue(round(mx1)); m_sCoord1YUnMapped->SetValue(round(my1)); m_wfimg.MercatorToInput(x2, y2, mx2, my2); m_sCoord2XUnMapped->SetValue(round(mx2)); m_sCoord2YUnMapped->SetValue(round(my2)); double coord1lat, coord1lon, coord2lat, coord2lon; m_tCoord1Lat->GetValue().ToDouble(&coord1lat); m_tCoord1Lon->GetValue().ToDouble(&coord1lon); m_tCoord2Lat->GetValue().ToDouble(&coord2lat); m_tCoord2Lon->GetValue().ToDouble(&coord2lon); WriteMappingLatLon(coord1lat, coord1lon, coord2lat, coord2lon); } SetUnMappedCoordRanges(); UpdateMappingControls(); m_rbCoord1UnMapped->SetValue(true); m_rbCoord2UnMapped->SetValue(false); } else if(event.GetPage() == m_pages[2]) { StoreMappingParams(); /* invalidate mapped image */ m_wfimg.m_mappedimg = wxNullImage; m_rbCoord1UnMapped->SetValue(true); m_rbCoord2UnMapped->SetValue(false); if(!ApplyMapping()) { wxMessageDialog w ( this, _("Failed to apply mapping\nCheck Mapping Correction Parameters"), _("Mapping"), wxOK | wxICON_ERROR ); w.ShowModal(); ShowPage(m_pages[1], true); } else if(m_curCoords->mapping == WeatherFaxImageCoordinates::MERCATOR && m_curCoords->mappingmultiplier == 1 && m_curCoords->mappingratio == 1) { wxWizardEvent dummy; OnWizardFinished( dummy ); if(IsModal()) EndModal(wxID_OK); else Hide(); } } }
void wxDialog::EndModal(int retCode) { wxASSERT_MSG( IsModal(), _T("EndModal() called for non modal dialog") ); // m_endModalCalled = true; SetReturnCode(retCode); Hide(); }
void CConfigChooser::onCancel(wxCommandEvent& WXUNUSED(event)) { if (IsModal()) { EndModal(wxID_CANCEL); } else { SetReturnCode(wxID_CANCEL); Show(false); } }
void ExecutionDialog::OnClose(wxCloseEvent &event) { Abort(); delete conn; if (IsModal()) EndModal(-1); else Destroy(); }
// show dialog modally int wxDialog::ShowModal() { wxASSERT_MSG( !IsModal(), _T("wxDialog::ShowModal() reentered?") ); m_oldFocus = FindFocus(); m_endModalCalled = false; Show(); // EndModal may have been called from InitDialog handler (called from // inside Show()), which would cause an infinite loop if we didn't take it // into account if ( !m_endModalCalled ) { // modal dialog needs a parent window, so try to find one wxWindow *parent = GetParent(); if ( !parent ) { parent = FindSuitableParent(); } // remember where the focus was wxWindow *oldFocus = m_oldFocus; if ( !oldFocus ) { // VZ: do we really want to do this? oldFocus = parent; } // We have to remember the HWND because we need to check // the HWND still exists (oldFocus can be garbage when the dialog // exits, if it has been destroyed) HWND hwndOldFocus = oldFocus ? GetHwndOf(oldFocus) : NULL; // enter and run the modal loop { wxDialogModalDataTiedPtr modalData(&m_modalData, new wxDialogModalData(this)); modalData->RunLoop(); } // and restore focus // Note that this code MUST NOT access the dialog object's data // in case the object has been deleted (which will be the case // for a modal dialog that has been destroyed before calling EndModal). if ( oldFocus && (oldFocus != this) && ::IsWindow(hwndOldFocus)) { // This is likely to prove that the object still exists if (wxFindWinFromHandle((WXHWND) hwndOldFocus) == oldFocus) oldFocus->SetFocus(); } } return GetReturnCode(); }
void DatChoiceDialog::OnOkButtonClick(wxCommandEvent& event) { TransferDataFromWindow(); sCam=Choice1->GetString(Choice1->GetSelection()); sCadr=TextCtrl1->GetValue(); sBright=TextCtrl2->GetValue(); if (IsModal()) EndModal(wxID_OK); }
void ComboBox::HandleUpdate( float seconds ) { Bin::HandleUpdate( seconds ); if( GetState() != State::ACTIVE ) { if( IsModal() ) { ReleaseModal(); } } }
void wxDialog::OnCancel(wxCommandEvent& WXUNUSED(event)) { if ( IsModal() ) EndModal(wxID_CANCEL); else { SetReturnCode(wxID_CANCEL); this->Show(false); } }
void DIALOG_ANNOTATE::OnCancelClick( wxCommandEvent& event ) { if( IsModal() ) EndModal( wxID_CANCEL ); else { SetReturnCode( wxID_CANCEL ); this->Show( false ); } }
// Replacement for Show(TRUE) for modal dialogs - returns return code int wxDialog::ShowModal() { if ( !IsModal() ) { SetModal(TRUE); } Show(TRUE); return GetReturnCode(); }
bool MenuBar::Command(int id, int subId, Win *win, void *d) { if (id == CMD_CHECK) return Parent() ? Parent()->Command(id,subId,this,d) : false; SetSelect(-1); if (IsModal()) EndModal(id); return (Parent()) ? Parent()->Command(id, subId, win, d) : false; }