static int setup_rt_frame(int signr, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
unsigned long __user *retcode;
int err = 0;
frame = get_sigframe(ka, regs, sizeof(*frame));
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto segv_and_exit;
err |= __put_user(&frame->info, &frame->pinfo);
err |= __put_user(&frame->uc, &frame->puc);
err |= copy_siginfo_to_user(&frame->info, info);
/* Clear all the bits of the ucontext we don't use. */
err |= __clear_user(&frame->uc, offsetof(struct ucontext, uc_mcontext));
err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
/* Set up to return from userspace */
retcode = (unsigned long __user *) &frame->retcode;
/* The access_ok check was done above, so use __put_user here */
#define COPY(x) (err |= __put_user(x, retcode++))
COPY(0x0000002AUL | (__NR_rt_sigreturn << 7));
/* MVK __NR_rt_sigreturn,B0 */
COPY(0x10000000UL); /* SWE */
COPY(0x00006000UL); /* NOP 4 */
COPY(0x00006000UL); /* NOP 4 */
COPY(0x00006000UL); /* NOP 4 */
COPY(0x00006000UL); /* NOP 4 */
COPY(0x00006000UL); /* NOP 4 */
COPY(0x00006000UL); /* NOP 4 */
COPY(0x00006000UL); /* NOP 4 */
#undef COPY
if (err)
goto segv_and_exit;
flush_icache_range((unsigned long) &frame->retcode,
(unsigned long) &frame->retcode + RETCODE_SIZE);
retcode = (unsigned long __user *) &frame->retcode;
/* Change user context to branch to signal handler */
regs->sp = (unsigned long) frame - 8;
regs->b3 = (unsigned long) retcode;
regs->pc = (unsigned long) ka->sa.sa_handler;
/* Give the signal number to the handler */
regs->a4 = signr;
/*
* For realtime signals we must also set the second and third
* arguments for the signal handler.
* -- Peter Maydell <*****@*****.**> 2000-12-06
*/
regs->b4 = (unsigned long)&frame->info;
regs->a6 = (unsigned long)&frame->uc;
return 0;
segv_and_exit:
force_sigsegv(signr, current);
return -EFAULT;
}
static int do_netfilter_replace(int fd, int level, int optname,
char __user *optval, int optlen)
{
struct compat_ipt_replace __user *urepl;
struct ipt_replace __user *repl_nat;
char name[IPT_TABLE_MAXNAMELEN];
u32 origsize, tmp32, num_counters;
unsigned int repl_nat_size;
int ret;
int i;
compat_uptr_t ucntrs;
urepl = (struct compat_ipt_replace __user *)optval;
if (get_user(origsize, &urepl->size))
return -EFAULT;
/* Hack: Causes ipchains to give correct error msg --RR */
if (optlen != sizeof(*urepl) + origsize)
return -ENOPROTOOPT;
/* XXX Assumes that size of ipt_entry is the same both in
* native and compat environments.
*/
repl_nat_size = sizeof(*repl_nat) + origsize;
repl_nat = compat_alloc_user_space(repl_nat_size);
ret = -EFAULT;
if (put_user(origsize, &repl_nat->size))
goto out;
if (!access_ok(VERIFY_READ, urepl, optlen) ||
!access_ok(VERIFY_WRITE, repl_nat, optlen))
goto out;
if (__copy_from_user(name, urepl->name, sizeof(urepl->name)) ||
__copy_to_user(repl_nat->name, name, sizeof(repl_nat->name)))
goto out;
if (__get_user(tmp32, &urepl->valid_hooks) ||
__put_user(tmp32, &repl_nat->valid_hooks))
goto out;
if (__get_user(tmp32, &urepl->num_entries) ||
__put_user(tmp32, &repl_nat->num_entries))
goto out;
if (__get_user(num_counters, &urepl->num_counters) ||
__put_user(num_counters, &repl_nat->num_counters))
goto out;
if (__get_user(ucntrs, &urepl->counters) ||
__put_user(compat_ptr(ucntrs), &repl_nat->counters))
goto out;
if (__copy_in_user(&repl_nat->entries[0],
&urepl->entries[0],
origsize))
goto out;
for (i = 0; i < NF_IP_NUMHOOKS; i++) {
if (__get_user(tmp32, &urepl->hook_entry[i]) ||
__put_user(tmp32, &repl_nat->hook_entry[i]) ||
__get_user(tmp32, &urepl->underflow[i]) ||
__put_user(tmp32, &repl_nat->underflow[i]))
goto out;
}
/*
* Since struct ipt_counters just contains two u_int64_t members
* we can just do the access_ok check here and pass the (converted)
* pointer into the standard syscall. We hope that the pointer is
* not misaligned ...
*/
if (!access_ok(VERIFY_WRITE, compat_ptr(ucntrs),
num_counters * sizeof(struct ipt_counters)))
goto out;
ret = sys_setsockopt(fd, level, optname,
(char __user *)repl_nat, repl_nat_size);
out:
return ret;
}
static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
int err = 0;
int signal;
frame = get_sigframe(ka, regs->regs[15], sizeof(*frame));
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
signal = current_thread_info()->exec_domain
&& current_thread_info()->exec_domain->signal_invmap
&& sig < 32
? current_thread_info()->exec_domain->signal_invmap[sig]
: sig;
err |= copy_siginfo_to_user(&frame->info, info);
/* Create the ucontext. */
err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(0, &frame->uc.uc_link);
err |= __put_user((void *)current->sas_ss_sp,
&frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->regs[15]),
&frame->uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= setup_sigcontext(&frame->uc.uc_mcontext,
regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ka->sa.sa_flags & SA_RESTORER) {
regs->pr = (unsigned long) ka->sa.sa_restorer;
} else {
/* Generate return code (system call to rt_sigreturn) */
err |= __put_user(MOVW(7), &frame->retcode[0]);
err |= __put_user(TRAP16, &frame->retcode[1]);
err |= __put_user(OR_R0_R0, &frame->retcode[2]);
err |= __put_user(OR_R0_R0, &frame->retcode[3]);
err |= __put_user(OR_R0_R0, &frame->retcode[4]);
err |= __put_user(OR_R0_R0, &frame->retcode[5]);
err |= __put_user(OR_R0_R0, &frame->retcode[6]);
err |= __put_user((__NR_rt_sigreturn), &frame->retcode[7]);
regs->pr = (unsigned long) frame->retcode;
}
if (err)
goto give_sigsegv;
/* Set up registers for signal handler */
regs->regs[15] = (unsigned long) frame;
regs->regs[4] = signal; /* Arg for signal handler */
regs->regs[5] = (unsigned long) &frame->info;
regs->regs[6] = (unsigned long) &frame->uc;
regs->pc = (unsigned long) ka->sa.sa_handler;
set_fs(USER_DS);
#if DEBUG_SIG
printk("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
current->comm, current->pid, frame, regs->pc, regs->pr);
#endif
flush_cache_sigtramp(regs->pr);
if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
return;
give_sigsegv:
if (sig == SIGSEGV)
ka->sa.sa_handler = SIG_DFL;
force_sig(SIGSEGV, current);
}
asmlinkage void sparc64_get_context(struct pt_regs *regs)
{
struct ucontext __user *ucp = (struct ucontext __user *)
regs->u_regs[UREG_I0];
mc_gregset_t __user *grp;
mcontext_t __user *mcp;
unsigned long fp, i7;
unsigned char fenab;
int err;
synchronize_user_stack();
if (get_thread_wsaved() || clear_user(ucp, sizeof(*ucp)))
goto do_sigsegv;
#if 1
fenab = 0; /* IMO get_context is like any other system call, thus modifies FPU state -jj */
#else
fenab = (current_thread_info()->fpsaved[0] & FPRS_FEF);
#endif
mcp = &ucp->uc_mcontext;
grp = &mcp->mc_gregs;
/* Skip over the trap instruction, first. */
if (test_thread_flag(TIF_32BIT)) {
regs->tpc = (regs->tnpc & 0xffffffff);
regs->tnpc = (regs->tnpc + 4) & 0xffffffff;
} else {
regs->tpc = regs->tnpc;
regs->tnpc += 4;
}
err = 0;
if (_NSIG_WORDS == 1)
err |= __put_user(current->blocked.sig[0],
(unsigned long __user *)&ucp->uc_sigmask);
else
err |= __copy_to_user(&ucp->uc_sigmask, ¤t->blocked,
sizeof(sigset_t));
err |= __put_user(regs->tstate, &((*grp)[MC_TSTATE]));
err |= __put_user(regs->tpc, &((*grp)[MC_PC]));
err |= __put_user(regs->tnpc, &((*grp)[MC_NPC]));
err |= __put_user(regs->y, &((*grp)[MC_Y]));
err |= __put_user(regs->u_regs[UREG_G1], &((*grp)[MC_G1]));
err |= __put_user(regs->u_regs[UREG_G2], &((*grp)[MC_G2]));
err |= __put_user(regs->u_regs[UREG_G3], &((*grp)[MC_G3]));
err |= __put_user(regs->u_regs[UREG_G4], &((*grp)[MC_G4]));
err |= __put_user(regs->u_regs[UREG_G5], &((*grp)[MC_G5]));
err |= __put_user(regs->u_regs[UREG_G6], &((*grp)[MC_G6]));
err |= __put_user(regs->u_regs[UREG_G7], &((*grp)[MC_G7]));
err |= __put_user(regs->u_regs[UREG_I0], &((*grp)[MC_O0]));
err |= __put_user(regs->u_regs[UREG_I1], &((*grp)[MC_O1]));
err |= __put_user(regs->u_regs[UREG_I2], &((*grp)[MC_O2]));
err |= __put_user(regs->u_regs[UREG_I3], &((*grp)[MC_O3]));
err |= __put_user(regs->u_regs[UREG_I4], &((*grp)[MC_O4]));
err |= __put_user(regs->u_regs[UREG_I5], &((*grp)[MC_O5]));
err |= __put_user(regs->u_regs[UREG_I6], &((*grp)[MC_O6]));
err |= __put_user(regs->u_regs[UREG_I7], &((*grp)[MC_O7]));
err |= __get_user(fp,
(&(((struct reg_window __user *)(STACK_BIAS+regs->u_regs[UREG_I6]))->ins[6])));
err |= __get_user(i7,
(&(((struct reg_window __user *)(STACK_BIAS+regs->u_regs[UREG_I6]))->ins[7])));
err |= __put_user(fp, &(mcp->mc_fp));
err |= __put_user(i7, &(mcp->mc_i7));
err |= __put_user(fenab, &(mcp->mc_fpregs.mcfpu_enab));
if (fenab) {
unsigned long *fpregs = current_thread_info()->fpregs;
unsigned long fprs;
fprs = current_thread_info()->fpsaved[0];
if (fprs & FPRS_DL)
err |= copy_to_user(&(mcp->mc_fpregs.mcfpu_fregs), fpregs,
(sizeof(unsigned int) * 32));
if (fprs & FPRS_DU)
err |= copy_to_user(
((unsigned long __user *)&(mcp->mc_fpregs.mcfpu_fregs))+16, fpregs+16,
(sizeof(unsigned int) * 32));
err |= __put_user(current_thread_info()->xfsr[0], &(mcp->mc_fpregs.mcfpu_fsr));
err |= __put_user(current_thread_info()->gsr[0], &(mcp->mc_fpregs.mcfpu_gsr));
err |= __put_user(fprs, &(mcp->mc_fpregs.mcfpu_fprs));
}
if (err)
goto do_sigsegv;
return;
do_sigsegv:
force_sig(SIGSEGV, current);
}
int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
/* Handler is *really* a pointer to the function descriptor for
* the signal routine. The first entry in the function
* descriptor is the entry address of signal and the second
* entry is the TOC value we need to use.
*/
func_descr_t __user *funct_desc_ptr;
struct rt_sigframe __user *frame;
unsigned long newsp = 0;
long err = 0;
frame = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*frame), 0);
if (unlikely(frame == NULL))
goto badframe;
err |= __put_user(&frame->info, &frame->pinfo);
err |= __put_user(&frame->uc, &frame->puc);
err |= copy_siginfo_to_user(&frame->info, info);
if (err)
goto badframe;
/* Create the ucontext. */
err |= __put_user(0, &frame->uc.uc_flags);
err |= __save_altstack(&frame->uc.uc_stack, regs->gpr[1]);
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
if (MSR_TM_ACTIVE(regs->msr)) {
/* The ucontext_t passed to userland points to the second
* ucontext_t (for transactional state) with its uc_link ptr.
*/
err |= __put_user(&frame->uc_transact, &frame->uc.uc_link);
err |= setup_tm_sigcontexts(&frame->uc.uc_mcontext,
&frame->uc_transact.uc_mcontext,
regs, signr,
NULL,
(unsigned long)ka->sa.sa_handler);
} else
#endif
{
err |= __put_user(0, &frame->uc.uc_link);
err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, signr,
NULL, (unsigned long)ka->sa.sa_handler,
1);
}
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
goto badframe;
/* Make sure signal handler doesn't get spurious FP exceptions */
current->thread.fpscr.val = 0;
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
/* Remove TM bits from thread's MSR. The MSR in the sigcontext
* just indicates to userland that we were doing a transaction, but we
* don't want to return in transactional state:
*/
regs->msr &= ~MSR_TS_MASK;
#endif
/* Set up to return from userspace. */
if (vdso64_rt_sigtramp && current->mm->context.vdso_base) {
regs->link = current->mm->context.vdso_base + vdso64_rt_sigtramp;
} else {
err |= setup_trampoline(__NR_rt_sigreturn, &frame->tramp[0]);
if (err)
goto badframe;
regs->link = (unsigned long) &frame->tramp[0];
}
funct_desc_ptr = (func_descr_t __user *) ka->sa.sa_handler;
/* Allocate a dummy caller frame for the signal handler. */
newsp = ((unsigned long)frame) - __SIGNAL_FRAMESIZE;
err |= put_user(regs->gpr[1], (unsigned long __user *)newsp);
/* Set up "regs" so we "return" to the signal handler. */
err |= get_user(regs->nip, &funct_desc_ptr->entry);
/* enter the signal handler in big-endian mode */
regs->msr &= ~MSR_LE;
regs->gpr[1] = newsp;
err |= get_user(regs->gpr[2], &funct_desc_ptr->toc);
regs->gpr[3] = signr;
regs->result = 0;
if (ka->sa.sa_flags & SA_SIGINFO) {
err |= get_user(regs->gpr[4], (unsigned long __user *)&frame->pinfo);
err |= get_user(regs->gpr[5], (unsigned long __user *)&frame->puc);
regs->gpr[6] = (unsigned long) frame;
} else {
regs->gpr[4] = (unsigned long)&frame->uc.uc_mcontext;
}
if (err)
goto badframe;
return 1;
badframe:
#if DEBUG_SIG
printk("badframe in setup_rt_frame, regs=%p frame=%p newsp=%lx\n",
regs, frame, newsp);
#endif
if (show_unhandled_signals)
printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32,
current->comm, current->pid, "setup_rt_frame",
(long)frame, regs->nip, regs->link);
force_sigsegv(signr, current);
return 0;
}
static void inline setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *set, siginfo_t *info)
{
struct rt_sigframe *frame;
int err = 0;
frame = get_sigframe(ka, regs, sizeof(*frame));
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
/*
* Set up the return code ...
*
* li v0, __NR_rt_sigreturn
* syscall
*/
if (PLAT_TRAMPOLINE_STUFF_LINE)
__builtin_memset(frame->rs_code, '0',
PLAT_TRAMPOLINE_STUFF_LINE);
err |= __put_user(0x24020000 + __NR_rt_sigreturn, frame->rs_code + 0);
err |= __put_user(0x0000000c , frame->rs_code + 1);
flush_cache_sigtramp((unsigned long) frame->rs_code);
/* Create siginfo. */
err |= copy_siginfo_to_user(&frame->rs_info, info);
/* Create the ucontext. */
err |= __put_user(0, &frame->rs_uc.uc_flags);
err |= __put_user(0, &frame->rs_uc.uc_link);
err |= __put_user((void *)current->sas_ss_sp,
&frame->rs_uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->regs[29]),
&frame->rs_uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size,
&frame->rs_uc.uc_stack.ss_size);
err |= setup_sigcontext(regs, &frame->rs_uc.uc_mcontext);
err |= __copy_to_user(&frame->rs_uc.uc_sigmask, set, sizeof(*set));
if (err)
goto give_sigsegv;
/*
* Arguments to signal handler:
*
* a0 = signal number
* a1 = 0 (should be cause)
* a2 = pointer to ucontext
*
* $25 and c0_epc point to the signal handler, $29 points to
* the struct rt_sigframe.
*/
regs->regs[ 4] = signr;
regs->regs[ 5] = (unsigned long) &frame->rs_info;
regs->regs[ 6] = (unsigned long) &frame->rs_uc;
regs->regs[29] = (unsigned long) frame;
regs->regs[31] = (unsigned long) frame->rs_code;
regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler;
#if DEBUG_SIG
printk("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%p\n",
current->comm, current->pid,
frame, regs->cp0_epc, regs->regs[31]);
#endif
return;
give_sigsegv:
force_sigsegv(signr, current);
}
static void setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
int signo, sigset_t *oldset, siginfo_t *info)
{
struct rt_signal_frame __user *sf;
int sigframe_size, wsaved;
void __user *tail;
unsigned int psr;
int err;
synchronize_user_stack();
wsaved = current_thread_info()->w_saved;
sigframe_size = sizeof(*sf);
if (used_math())
sigframe_size += sizeof(__siginfo_fpu_t);
if (wsaved)
sigframe_size += sizeof(__siginfo_rwin_t);
sf = (struct rt_signal_frame __user *)
get_sigframe(&ka->sa, regs, sigframe_size);
if (invalid_frame_pointer(sf, sigframe_size))
goto sigill;
tail = sf + 1;
err = __put_user(regs->pc, &sf->regs.pc);
err |= __put_user(regs->npc, &sf->regs.npc);
err |= __put_user(regs->y, &sf->regs.y);
psr = regs->psr;
if (used_math())
psr |= PSR_EF;
err |= __put_user(psr, &sf->regs.psr);
err |= __copy_to_user(&sf->regs.u_regs, regs->u_regs, sizeof(regs->u_regs));
err |= __put_user(0, &sf->extra_size);
if (psr & PSR_EF) {
__siginfo_fpu_t *fp = tail;
tail += sizeof(*fp);
err |= save_fpu_state(regs, fp);
err |= __put_user(fp, &sf->fpu_save);
} else {
err |= __put_user(0, &sf->fpu_save);
}
if (wsaved) {
__siginfo_rwin_t *rwp = tail;
tail += sizeof(*rwp);
err |= save_rwin_state(wsaved, rwp);
err |= __put_user(rwp, &sf->rwin_save);
} else {
err |= __put_user(0, &sf->rwin_save);
}
err |= __copy_to_user(&sf->mask, &oldset->sig[0], sizeof(sigset_t));
/* Setup sigaltstack */
err |= __put_user(current->sas_ss_sp, &sf->stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->u_regs[UREG_FP]), &sf->stack.ss_flags);
err |= __put_user(current->sas_ss_size, &sf->stack.ss_size);
if (!wsaved) {
err |= __copy_to_user(sf, (char *) regs->u_regs[UREG_FP],
sizeof(struct reg_window32));
} else {
struct reg_window32 *rp;
rp = ¤t_thread_info()->reg_window[wsaved - 1];
err |= __copy_to_user(sf, rp, sizeof(struct reg_window32));
}
err |= copy_siginfo_to_user(&sf->info, info);
if (err)
goto sigsegv;
regs->u_regs[UREG_FP] = (unsigned long) sf;
regs->u_regs[UREG_I0] = signo;
regs->u_regs[UREG_I1] = (unsigned long) &sf->info;
regs->u_regs[UREG_I2] = (unsigned long) &sf->regs;
regs->pc = (unsigned long) ka->sa.sa_handler;
regs->npc = (regs->pc + 4);
if (ka->ka_restorer)
regs->u_regs[UREG_I7] = (unsigned long)ka->ka_restorer;
else {
regs->u_regs[UREG_I7] = (unsigned long)(&(sf->insns[0]) - 2);
/* mov __NR_sigreturn, %g1 */
err |= __put_user(0x821020d8, &sf->insns[0]);
/* t 0x10 */
err |= __put_user(0x91d02010, &sf->insns[1]);
if (err)
goto sigsegv;
/* Flush instruction space. */
flush_sig_insns(current->mm, (unsigned long) &(sf->insns[0]));
}
return;
sigill:
do_exit(SIGILL);
sigsegv:
force_sigsegv(signo, current);
}
/*
* NetBSD /dev/openprom ioctl calls.
*/
static int openprom_bsd_ioctl(struct inode * inode, struct file * file,
unsigned int cmd, unsigned long arg)
{
DATA *data = (DATA *) file->private_data;
struct opiocdesc op;
unsigned long flags;
int error, node, len;
char *str, *tmp;
char buffer[64];
static int cnt;
switch (cmd) {
case OPIOCGET:
if (copy_from_user(&op, (void *)arg, sizeof(op)))
return -EFAULT;
if (!goodnode(op.op_nodeid,data))
return -EINVAL;
error = copyin_string(op.op_name, op.op_namelen, &str);
if (error)
return error;
save_and_cli(flags);
len = prom_getproplen(op.op_nodeid,str);
restore_flags(flags);
if (len > op.op_buflen) {
kfree(str);
return -ENOMEM;
}
op.op_buflen = len;
if (len <= 0) {
kfree(str);
/* Verified by the above copy_from_user */
if (__copy_to_user((void *)arg, &op,
sizeof(op)))
return -EFAULT;
return 0;
}
tmp = kmalloc(len + 1, GFP_KERNEL);
if (!tmp) {
kfree(str);
return -ENOMEM;
}
save_and_cli(flags);
prom_getproperty(op.op_nodeid, str, tmp, len);
restore_flags(flags);
tmp[len] = '\0';
error = __copy_to_user((void *)arg, &op, sizeof(op));
if (!error)
error = copy_to_user(op.op_buf, tmp, len);
kfree(tmp);
kfree(str);
return error;
case OPIOCNEXTPROP:
if (copy_from_user(&op, (void *)arg, sizeof(op)))
return -EFAULT;
if (!goodnode(op.op_nodeid,data))
return -EINVAL;
error = copyin_string(op.op_name, op.op_namelen, &str);
if (error)
return error;
save_and_cli(flags);
tmp = prom_nextprop(op.op_nodeid,str,buffer);
restore_flags(flags);
if (tmp) {
len = strlen(tmp);
if (len > op.op_buflen)
len = op.op_buflen;
else
op.op_buflen = len;
} else {
len = op.op_buflen = 0;
}
error = verify_area(VERIFY_WRITE, (void *)arg, sizeof(op));
if (error) {
kfree(str);
return error;
}
error = verify_area(VERIFY_WRITE, op.op_buf, len);
if (error) {
kfree(str);
return error;
}
error = __copy_to_user((void *)arg, &op, sizeof(op));
if (!error) error = __copy_to_user(op.op_buf, tmp, len);
kfree(str);
return error;
case OPIOCSET:
if (copy_from_user(&op, (void *)arg, sizeof(op)))
return -EFAULT;
if (!goodnode(op.op_nodeid,data))
return -EINVAL;
error = copyin_string(op.op_name, op.op_namelen, &str);
if (error)
return error;
error = copyin_string(op.op_buf, op.op_buflen, &tmp);
if (error) {
kfree(str);
return error;
}
save_and_cli(flags);
len = prom_setprop(op.op_nodeid,str,tmp,op.op_buflen+1);
restore_flags(flags);
if (len != op.op_buflen)
return -EINVAL;
kfree(str);
kfree(tmp);
return 0;
case OPIOCGETOPTNODE:
if (copy_to_user((void *)arg, &options_node, sizeof(int)))
return -EFAULT;
return 0;
case OPIOCGETNEXT:
case OPIOCGETCHILD:
if (copy_from_user(&node, (void *)arg, sizeof(int)))
return -EFAULT;
save_and_cli(flags);
if (cmd == OPIOCGETNEXT)
node = __prom_getsibling(node);
else
node = __prom_getchild(node);
restore_flags(flags);
if (__copy_to_user((void *)arg, &node, sizeof(int)))
return -EFAULT;
return 0;
default:
if (cnt++ < 10)
printk(KERN_INFO "openprom_bsd_ioctl: cmd 0x%X\n", cmd);
return -EINVAL;
}
}
static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
unsigned long return_ip;
int err = 0;
frame = get_sigframe(ka, regs, sizeof(*frame));
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
err |= __put_user(&frame->info, &frame->pinfo);
err |= __put_user(&frame->uc, &frame->puc);
err |= copy_siginfo_to_user(&frame->info, info);
if (err)
goto give_sigsegv;
err |= __clear_user(&frame->uc, offsetof(struct ucontext, uc_mcontext));
err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
goto give_sigsegv;
if (ka->sa.sa_flags & SA_RESTORER) {
return_ip = (unsigned long)ka->sa.sa_restorer;
} else {
return_ip = (unsigned long)&frame->retcode;
err |= __put_user(0x9c5f, (short __user *)(frame->retcode+0));
err |= __put_user(__NR_rt_sigreturn,
(short __user *)(frame->retcode+2));
err |= __put_user(0xe93d, (short __user *)(frame->retcode+4));
}
if (err)
goto give_sigsegv;
regs->irp = (unsigned long) ka->sa.sa_handler;
regs->srp = return_ip;
regs->r10 = sig;
regs->r11 = (unsigned long)&frame->info;
regs->r12 = 0;
wrusp((unsigned long)frame);
return 0;
give_sigsegv:
force_sigsegv(sig, current);
return -EFAULT;
}
static void
setup_rt_frame(int signr, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
/* Handler is *really* a pointer to the function descriptor for
* the signal routine. The first entry in the function
* descriptor is the entry address of signal and the second
* entry is the TOC value we need to use.
*/
func_descr_t *funct_desc_ptr;
struct rt_sigframe *frame;
unsigned long newsp;
int err = 0;
frame = get_sigframe(ka, regs, sizeof(*frame));
if (verify_area(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
err |= __put_user(&frame->info, &frame->pinfo);
err |= __put_user(&frame->uc, &frame->puc);
err |= copy_siginfo_to_user(&frame->info, info);
if (err)
goto give_sigsegv;
/* Create the ucontext. */
err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(0, &frame->uc.uc_link);
err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->gpr[1]),
&frame->uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, signr, NULL,
(unsigned long)ka->sa.sa_handler);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
goto give_sigsegv;
/* Set up to return from userspace. */
err |= setup_trampoline(__NR_rt_sigreturn, &frame->tramp[0]);
if (err)
goto give_sigsegv;
funct_desc_ptr = (func_descr_t *) ka->sa.sa_handler;
/* Allocate a dummy caller frame for the signal handler. */
newsp = (unsigned long)frame - __SIGNAL_FRAMESIZE;
err |= put_user(0, (unsigned long *)newsp);
/* Set up "regs" so we "return" to the signal handler. */
err |= get_user(regs->nip, &funct_desc_ptr->entry);
regs->link = (unsigned long) &frame->tramp[0];
regs->gpr[1] = newsp;
err |= get_user(regs->gpr[2], &funct_desc_ptr->toc);
regs->gpr[3] = signr;
err |= get_user(regs->gpr[4], (unsigned long *)&frame->pinfo);
err |= get_user(regs->gpr[5], (unsigned long *)&frame->puc);
regs->gpr[6] = (unsigned long) frame;
if (err)
goto give_sigsegv;
return;
give_sigsegv:
#if DEBUG_SIG
printk("badframe in setup_rt_frame, regs=%p frame=%p, newsp=0x%lx\n",
regs, frame, newsp);
#endif
do_exit(SIGSEGV);
}
static int
proc_dodebug(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
char tmpbuf[20], c, *s;
char __user *p;
unsigned int value;
size_t left, len;
if ((*ppos && !write) || !*lenp) {
*lenp = 0;
return 0;
}
left = *lenp;
if (write) {
if (!access_ok(VERIFY_READ, buffer, left))
return -EFAULT;
p = buffer;
while (left && __get_user(c, p) >= 0 && isspace(c))
left--, p++;
if (!left)
goto done;
if (left > sizeof(tmpbuf) - 1)
return -EINVAL;
if (copy_from_user(tmpbuf, p, left))
return -EFAULT;
tmpbuf[left] = '\0';
for (s = tmpbuf, value = 0; '0' <= *s && *s <= '9'; s++, left--)
value = 10 * value + (*s - '0');
if (*s && !isspace(*s))
return -EINVAL;
while (left && isspace(*s))
left--, s++;
*(unsigned int *) table->data = value;
/* Display the RPC tasks on writing to rpc_debug */
if (strcmp(table->procname, "rpc_debug") == 0)
rpc_show_tasks(&init_net);
} else {
if (!access_ok(VERIFY_WRITE, buffer, left))
return -EFAULT;
len = sprintf(tmpbuf, "%d", *(unsigned int *) table->data);
if (len > left)
len = left;
if (__copy_to_user(buffer, tmpbuf, len))
return -EFAULT;
if ((left -= len) > 0) {
if (put_user('\n', (char __user *)buffer + len))
return -EFAULT;
left--;
}
}
done:
*lenp -= left;
*ppos += *lenp;
return 0;
}
/*
* Save the current user registers on the user stack.
* We only save the altivec/spe registers if the process has used
* altivec/spe instructions at some point.
*/
static int
save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, int sigret)
{
/* save general and floating-point registers */
CHECK_FULL_REGS(regs);
preempt_disable();
if (regs->msr & MSR_FP)
giveup_fpu(current);
#ifdef CONFIG_ALTIVEC
if (current->thread.used_vr && (regs->msr & MSR_VEC))
giveup_altivec(current);
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_SPE
if (current->thread.used_spe && (regs->msr & MSR_SPE))
giveup_spe(current);
#endif /* CONFIG_ALTIVEC */
preempt_enable();
if (__copy_to_user(&frame->mc_gregs, regs, GP_REGS_SIZE)
|| __copy_to_user(&frame->mc_fregs, current->thread.fpr,
ELF_NFPREG * sizeof(double)))
return 1;
current->thread.fpscr = 0; /* turn off all fp exceptions */
#ifdef CONFIG_ALTIVEC
/* save altivec registers */
if (current->thread.used_vr) {
if (__copy_to_user(&frame->mc_vregs, current->thread.vr,
ELF_NVRREG * sizeof(vector128)))
return 1;
/* set MSR_VEC in the saved MSR value to indicate that
frame->mc_vregs contains valid data */
if (__put_user(regs->msr | MSR_VEC, &frame->mc_gregs[PT_MSR]))
return 1;
}
/* else assert((regs->msr & MSR_VEC) == 0) */
/* We always copy to/from vrsave, it's 0 if we don't have or don't
* use altivec. Since VSCR only contains 32 bits saved in the least
* significant bits of a vector, we "cheat" and stuff VRSAVE in the
* most significant bits of that same vector. --BenH
*/
if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32]))
return 1;
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_SPE
/* save spe registers */
if (current->thread.used_spe) {
if (__copy_to_user(&frame->mc_vregs, current->thread.evr,
ELF_NEVRREG * sizeof(u32)))
return 1;
/* set MSR_SPE in the saved MSR value to indicate that
frame->mc_vregs contains valid data */
if (__put_user(regs->msr | MSR_SPE, &frame->mc_gregs[PT_MSR]))
return 1;
}
/* else assert((regs->msr & MSR_SPE) == 0) */
/* We always copy to/from spefscr */
if (__put_user(current->thread.spefscr, (u32 *)&frame->mc_vregs + ELF_NEVRREG))
return 1;
#endif /* CONFIG_SPE */
if (sigret) {
/* Set up the sigreturn trampoline: li r0,sigret; sc */
if (__put_user(0x38000000UL + sigret, &frame->tramp[0])
|| __put_user(0x44000002UL, &frame->tramp[1]))
return 1;
flush_icache_range((unsigned long) &frame->tramp[0],
(unsigned long) &frame->tramp[2]);
}
return 0;
}
static int setup_rt_frame32(struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
{
rt_sigframe32 __user *frame;
unsigned long restorer;
size_t frame_size;
u32 uc_flags;
frame_size = sizeof(*frame) -
sizeof(frame->uc.uc_mcontext_ext.__reserved);
/*
* gprs_high are always present for 31-bit compat tasks.
* The space for vector registers is only allocated if
* the machine supports it
*/
uc_flags = UC_GPRS_HIGH;
if (MACHINE_HAS_VX) {
if (current->thread.vxrs)
uc_flags |= UC_VXRS;
} else
frame_size -= sizeof(frame->uc.uc_mcontext_ext.vxrs_low) +
sizeof(frame->uc.uc_mcontext_ext.vxrs_high);
frame = get_sigframe(&ksig->ka, regs, frame_size);
if (frame == (void __user *) -1UL)
return -EFAULT;
/* Set up backchain. */
if (__put_user(regs->gprs[15], (unsigned int __force __user *) frame))
return -EFAULT;
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ksig->ka.sa.sa_flags & SA_RESTORER) {
restorer = (unsigned long __force)
ksig->ka.sa.sa_restorer | PSW32_ADDR_AMODE;
} else {
__u16 __user *svc = &frame->svc_insn;
if (__put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn, svc))
return -EFAULT;
restorer = (unsigned long __force) svc | PSW32_ADDR_AMODE;
}
/* Create siginfo on the signal stack */
if (copy_siginfo_to_user32(&frame->info, &ksig->info))
return -EFAULT;
/* Store registers needed to create the signal frame */
store_sigregs();
/* Create ucontext on the signal stack. */
if (__put_user(uc_flags, &frame->uc.uc_flags) ||
__put_user(0, &frame->uc.uc_link) ||
__compat_save_altstack(&frame->uc.uc_stack, regs->gprs[15]) ||
save_sigregs32(regs, &frame->uc.uc_mcontext) ||
__copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)) ||
save_sigregs_ext32(regs, &frame->uc.uc_mcontext_ext))
return -EFAULT;
/* Set up registers for signal handler */
regs->gprs[14] = restorer;
regs->gprs[15] = (__force __u64) frame;
/* Force 31 bit amode and default user address space control. */
regs->psw.mask = PSW_MASK_BA |
(PSW_USER_BITS & PSW_MASK_ASC) |
(regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (__u64 __force) ksig->ka.sa.sa_handler;
regs->gprs[2] = map_signal(ksig->sig);
regs->gprs[3] = (__force __u64) &frame->info;
regs->gprs[4] = (__force __u64) &frame->uc;
regs->gprs[5] = task_thread_info(current)->last_break;
return 0;
}
static int setup_frame32(struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
{
int sig = ksig->sig;
sigframe32 __user *frame;
struct sigcontext32 sc;
unsigned long restorer;
size_t frame_size;
/*
* gprs_high are always present for 31-bit compat tasks.
* The space for vector registers is only allocated if
* the machine supports it
*/
frame_size = sizeof(*frame) - sizeof(frame->sregs_ext.__reserved);
if (!MACHINE_HAS_VX)
frame_size -= sizeof(frame->sregs_ext.vxrs_low) +
sizeof(frame->sregs_ext.vxrs_high);
frame = get_sigframe(&ksig->ka, regs, frame_size);
if (frame == (void __user *) -1UL)
return -EFAULT;
/* Set up backchain. */
if (__put_user(regs->gprs[15], (unsigned int __user *) frame))
return -EFAULT;
/* Create struct sigcontext32 on the signal stack */
memcpy(&sc.oldmask, &set->sig, _SIGMASK_COPY_SIZE32);
sc.sregs = (__u32)(unsigned long __force) &frame->sregs;
if (__copy_to_user(&frame->sc, &sc, sizeof(frame->sc)))
return -EFAULT;
/* Store registers needed to create the signal frame */
store_sigregs();
/* Create _sigregs32 on the signal stack */
if (save_sigregs32(regs, &frame->sregs))
return -EFAULT;
/* Place signal number on stack to allow backtrace from handler. */
if (__put_user(regs->gprs[2], (int __force __user *) &frame->signo))
return -EFAULT;
/* Create _sigregs_ext32 on the signal stack */
if (save_sigregs_ext32(regs, &frame->sregs_ext))
return -EFAULT;
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ksig->ka.sa.sa_flags & SA_RESTORER) {
restorer = (unsigned long __force)
ksig->ka.sa.sa_restorer | PSW32_ADDR_AMODE;
} else {
/* Signal frames without vectors registers are short ! */
__u16 __user *svc = (void __user *) frame + frame_size - 2;
if (__put_user(S390_SYSCALL_OPCODE | __NR_sigreturn, svc))
return -EFAULT;
restorer = (unsigned long __force) svc | PSW32_ADDR_AMODE;
}
/* Set up registers for signal handler */
regs->gprs[14] = restorer;
regs->gprs[15] = (__force __u64) frame;
/* Force 31 bit amode and default user address space control. */
regs->psw.mask = PSW_MASK_BA |
(PSW_USER_BITS & PSW_MASK_ASC) |
(regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (__force __u64) ksig->ka.sa.sa_handler;
regs->gprs[2] = map_signal(sig);
regs->gprs[3] = (__force __u64) &frame->sc;
/* We forgot to include these in the sigcontext.
To avoid breaking binary compatibility, they are passed as args. */
if (sig == SIGSEGV || sig == SIGBUS || sig == SIGILL ||
sig == SIGTRAP || sig == SIGFPE) {
/* set extra registers only for synchronous signals */
regs->gprs[4] = regs->int_code & 127;
regs->gprs[5] = regs->int_parm_long;
regs->gprs[6] = task_thread_info(current)->last_break;
}
return 0;
}
static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
int err = 0;
int signal;
frame = get_sigframe(ka, regs->spu, sizeof(*frame));
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
signal = current_thread_info()->exec_domain
&& current_thread_info()->exec_domain->signal_invmap
&& sig < 32
? current_thread_info()->exec_domain->signal_invmap[sig]
: sig;
err |= __put_user(signal, &frame->sig);
if (err)
goto give_sigsegv;
err |= __put_user(&frame->info, &frame->pinfo);
err |= __put_user(&frame->uc, &frame->puc);
err |= copy_siginfo_to_user(&frame->info, info);
if (err)
goto give_sigsegv;
/* Create the ucontext. */
err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(0, &frame->uc.uc_link);
err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->spu),
&frame->uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
goto give_sigsegv;
/* Set up to return from userspace. */
regs->lr = (unsigned long)ka->sa.sa_restorer;
/* Set up registers for signal handler */
regs->spu = (unsigned long)frame;
regs->r0 = signal; /* Arg for signal handler */
regs->r1 = (unsigned long)&frame->info;
regs->r2 = (unsigned long)&frame->uc;
regs->bpc = (unsigned long)ka->sa.sa_handler;
set_fs(USER_DS);
#if DEBUG_SIG
printk("SIG deliver (%s:%d): sp=%p pc=%p\n",
current->comm, current->pid, frame, regs->pc);
#endif
return;
give_sigsegv:
force_sigsegv(sig, current);
}
int save_i387_xstate(void __user *buf)
{
struct task_struct *tsk = current;
int err = 0;
if (!access_ok(VERIFY_WRITE, buf, sig_xstate_size))
return -EACCES;
BUG_ON(sig_xstate_size < xstate_size);
if ((unsigned long)buf % 64)
printk("save_i387_xstate: bad fpstate %p\n", buf);
if (!used_math())
return 0;
if (user_has_fpu()) {
if (use_xsave())
err = xsave_user(buf);
else
err = fxsave_user(buf);
if (err)
return err;
user_fpu_end();
} else {
sanitize_i387_state(tsk);
if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave,
xstate_size))
return -1;
}
clear_used_math(); /* trigger finit */
if (use_xsave()) {
struct _fpstate __user *fx = buf;
struct _xstate __user *x = buf;
u64 xstate_bv;
err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved,
sizeof(struct _fpx_sw_bytes));
err |= __put_user(FP_XSTATE_MAGIC2,
(__u32 __user *) (buf + sig_xstate_size
- FP_XSTATE_MAGIC2_SIZE));
/*
* Read the xstate_bv which we copied (directly from the cpu or
* from the state in task struct) to the user buffers and
* set the FP/SSE bits.
*/
err |= __get_user(xstate_bv, &x->xstate_hdr.xstate_bv);
/*
* For legacy compatible, we always set FP/SSE bits in the bit
* vector while saving the state to the user context. This will
* enable us capturing any changes(during sigreturn) to
* the FP/SSE bits by the legacy applications which don't touch
* xstate_bv in the xsave header.
*
* xsave aware apps can change the xstate_bv in the xsave
* header as well as change any contents in the memory layout.
* xrestore as part of sigreturn will capture all the changes.
*/
xstate_bv |= XSTATE_FPSSE;
err |= __put_user(xstate_bv, &x->xstate_hdr.xstate_bv);
if (err)
return err;
}
return 1;
}
static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
int err = 0;
int signal;
frame = get_sigframe(ka, regs->regs[15], sizeof(*frame));
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
signal = current_thread_info()->exec_domain
&& current_thread_info()->exec_domain->signal_invmap
&& sig < 32
? current_thread_info()->exec_domain->signal_invmap[sig]
: sig;
err |= copy_siginfo_to_user(&frame->info, info);
/* Create the ucontext. */
err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(NULL, &frame->uc.uc_link);
err |= __put_user((void *)current->sas_ss_sp,
&frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->regs[15]),
&frame->uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= setup_sigcontext(&frame->uc.uc_mcontext,
regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ka->sa.sa_flags & SA_RESTORER) {
regs->pr = (unsigned long) ka->sa.sa_restorer;
#ifdef CONFIG_VSYSCALL
} else if (likely(current->mm->context.vdso)) {
regs->pr = VDSO_SYM(&__kernel_rt_sigreturn);
#endif
} else {
/* Generate return code (system call to rt_sigreturn) */
err |= __put_user(MOVW(7), &frame->retcode[0]);
err |= __put_user(TRAP_NOARG, &frame->retcode[1]);
err |= __put_user(OR_R0_R0, &frame->retcode[2]);
err |= __put_user(OR_R0_R0, &frame->retcode[3]);
err |= __put_user(OR_R0_R0, &frame->retcode[4]);
err |= __put_user(OR_R0_R0, &frame->retcode[5]);
err |= __put_user(OR_R0_R0, &frame->retcode[6]);
err |= __put_user((__NR_rt_sigreturn), &frame->retcode[7]);
regs->pr = (unsigned long) frame->retcode;
}
if (err)
goto give_sigsegv;
/* Set up registers for signal handler */
regs->regs[15] = (unsigned long) frame;
regs->regs[4] = signal; /* Arg for signal handler */
regs->regs[5] = (unsigned long) &frame->info;
regs->regs[6] = (unsigned long) &frame->uc;
if (current->personality & FDPIC_FUNCPTRS) {
struct fdpic_func_descriptor __user *funcptr =
(struct fdpic_func_descriptor __user *)ka->sa.sa_handler;
__get_user(regs->pc, &funcptr->text);
__get_user(regs->regs[12], &funcptr->GOT);
} else
regs->pc = (unsigned long)ka->sa.sa_handler;
set_fs(USER_DS);
pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
return 0;
give_sigsegv:
force_sigsegv(sig, current);
return -EFAULT;
}
static void
setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs, struct switch_stack * sw)
{
unsigned long oldsp, r26, err = 0;
struct rt_sigframe *frame;
oldsp = rdusp();
frame = get_sigframe(ka, oldsp, sizeof(*frame));
if (verify_area(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
err |= copy_siginfo_to_user(&frame->info, info);
/* Create the ucontext. */
err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(0, &frame->uc.uc_link);
err |= __put_user(set->sig[0], &frame->uc.uc_osf_sigmask);
err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(oldsp), &frame->uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, sw,
set->sig[0], oldsp);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
goto give_sigsegv;
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ka->ka_restorer) {
r26 = (unsigned long) ka->ka_restorer;
} else {
err |= __put_user(INSN_MOV_R30_R16, frame->retcode+0);
err |= __put_user(INSN_LDI_R0+__NR_rt_sigreturn,
frame->retcode+1);
err |= __put_user(INSN_CALLSYS, frame->retcode+2);
imb();
r26 = (unsigned long) frame->retcode;
}
if (err)
goto give_sigsegv;
/* "Return" to the handler */
regs->r26 = r26;
regs->r27 = regs->pc = (unsigned long) ka->sa.sa_handler;
regs->r16 = sig; /* a0: signal number */
regs->r17 = (unsigned long) &frame->info; /* a1: siginfo pointer */
regs->r18 = (unsigned long) &frame->uc; /* a2: ucontext pointer */
wrusp((unsigned long) frame);
#if DEBUG_SIG
printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
current->comm, current->pid, frame, regs->pc, regs->r26);
#endif
return;
give_sigsegv:
if (sig == SIGSEGV)
ka->sa.sa_handler = SIG_DFL;
force_sig(SIGSEGV, current);
}
static void setup_frame(struct k_sigaction *ka, struct pt_regs *regs,
int signo, sigset_t *oldset)
{
struct signal_frame __user *sf;
int sigframe_size, err;
/* 1. Make sure everything is clean */
synchronize_user_stack();
sigframe_size = SF_ALIGNEDSZ;
if (!used_math())
sigframe_size -= sizeof(__siginfo_fpu_t);
sf = (struct signal_frame __user *)
get_sigframe(&ka->sa, regs, sigframe_size);
if (invalid_frame_pointer(sf, sigframe_size))
goto sigill_and_return;
tail = sf + 1;
/* 2. Save the current process state */
err = __copy_to_user(&sf->info.si_regs, regs, sizeof(struct pt_regs));
err |= __put_user(0, &sf->extra_size);
if (used_math()) {
__siginfo_fpu_t __user *fp = tail;
tail += sizeof(*fp);
err |= save_fpu_state(regs, fp);
err |= __put_user(fp, &sf->fpu_save);
} else {
err |= __put_user(0, &sf->fpu_save);
}
if (wsaved) {
__siginfo_rwin_t __user *rwp = tail;
tail += sizeof(*rwp);
err |= save_rwin_state(wsaved, rwp);
err |= __put_user(rwp, &sf->rwin_save);
} else {
err |= __put_user(0, &sf->rwin_save);
}
err |= __put_user(oldset->sig[0], &sf->info.si_mask);
err |= __copy_to_user(sf->extramask, &oldset->sig[1],
(_NSIG_WORDS - 1) * sizeof(unsigned int));
if (!wsaved) {
err |= __copy_to_user(sf, (char *) regs->u_regs[UREG_FP],
sizeof(struct reg_window32));
} else {
struct reg_window32 *rp;
rp = ¤t_thread_info()->reg_window[wsaved - 1];
err |= __copy_to_user(sf, rp, sizeof(struct reg_window32));
}
if (err)
goto sigsegv;
/* 3. signal handler back-trampoline and parameters */
regs->u_regs[UREG_FP] = (unsigned long) sf;
regs->u_regs[UREG_I0] = signo;
regs->u_regs[UREG_I1] = (unsigned long) &sf->info;
regs->u_regs[UREG_I2] = (unsigned long) &sf->info;
/* 4. signal handler */
regs->pc = (unsigned long) ka->sa.sa_handler;
regs->npc = (regs->pc + 4);
/* 5. return to kernel instructions */
if (ka->ka_restorer)
regs->u_regs[UREG_I7] = (unsigned long)ka->ka_restorer;
else {
regs->u_regs[UREG_I7] = (unsigned long)(&(sf->insns[0]) - 2);
/* mov __NR_sigreturn, %g1 */
err |= __put_user(0x821020d8, &sf->insns[0]);
/* t 0x10 */
err |= __put_user(0x91d02010, &sf->insns[1]);
if (err)
goto sigsegv;
/* Flush instruction space. */
flush_sig_insns(current->mm, (unsigned long) &(sf->insns[0]));
}
return;
sigill_and_return:
do_exit(SIGILL);
sigsegv:
force_sigsegv(signo, current);
}
static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set)
{
struct rt_sigframe __user *frame;
int rsig;
frame = get_sigframe(ka, sizeof(*frame));
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
rsig = sig;
if (sig < 32 &&
__current_thread_info->exec_domain &&
__current_thread_info->exec_domain->signal_invmap)
rsig = __current_thread_info->exec_domain->signal_invmap[sig];
if (__put_user(rsig, &frame->sig) ||
__put_user(&frame->info, &frame->pinfo) ||
__put_user(&frame->uc, &frame->puc))
goto give_sigsegv;
if (copy_siginfo_to_user(&frame->info, info))
goto give_sigsegv;
/* Create the ucontext. */
if (__put_user(0, &frame->uc.uc_flags) ||
__put_user(NULL, &frame->uc.uc_link) ||
__put_user((void __user *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp) ||
__put_user(sas_ss_flags(__frame->sp), &frame->uc.uc_stack.ss_flags) ||
__put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size))
goto give_sigsegv;
if (setup_sigcontext(&frame->uc.uc_mcontext, set->sig[0]))
goto give_sigsegv;
if (__copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)))
goto give_sigsegv;
/* Set up to return from userspace. If provided, use a stub
* already in userspace. */
if (ka->sa.sa_flags & SA_RESTORER) {
if (__put_user(ka->sa.sa_restorer, &frame->pretcode))
goto give_sigsegv;
}
else {
/* Set up the following code on the stack:
* setlos #__NR_sigreturn,gr7
* tira gr0,0
*/
if (__put_user((__sigrestore_t)frame->retcode, &frame->pretcode) ||
__put_user(0x8efc0000|__NR_rt_sigreturn, &frame->retcode[0]) ||
__put_user(0xc0700000, &frame->retcode[1]))
goto give_sigsegv;
flush_icache_range((unsigned long) frame->retcode,
(unsigned long) (frame->retcode + 2));
}
/* Set up registers for signal handler */
__frame->sp = (unsigned long) frame;
__frame->lr = (unsigned long) &frame->retcode;
__frame->gr8 = sig;
__frame->gr9 = (unsigned long) &frame->info;
if (get_personality & FDPIC_FUNCPTRS) {
struct fdpic_func_descriptor __user *funcptr =
(struct fdpic_func_descriptor __user *) ka->sa.sa_handler;
__get_user(__frame->pc, &funcptr->text);
__get_user(__frame->gr15, &funcptr->GOT);
} else {
__frame->pc = (unsigned long) ka->sa.sa_handler;
__frame->gr15 = 0;
}
set_fs(USER_DS);
/* the tracer may want to single-step inside the handler */
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
#if DEBUG_SIG
printk("SIG deliver %d (%s:%d): sp=%p pc=%lx ra=%p\n",
sig, current->comm, current->pid, frame, __frame->pc,
frame->pretcode);
#endif
return 0;
give_sigsegv:
force_sig(SIGSEGV, current);
return -EFAULT;
} /* end setup_rt_frame() */
/*
* As above, but Transactional Memory is in use, so deliver sigcontexts
* containing checkpointed and transactional register states.
*
* To do this, we treclaim (done before entering here) to gather both sets of
* registers and set up the 'normal' sigcontext registers with rolled-back
* register values such that a simple signal handler sees a correct
* checkpointed register state. If interested, a TM-aware sighandler can
* examine the transactional registers in the 2nd sigcontext to determine the
* real origin of the signal.
*/
static long setup_tm_sigcontexts(struct sigcontext __user *sc,
struct sigcontext __user *tm_sc,
struct pt_regs *regs,
int signr, sigset_t *set, unsigned long handler)
{
/* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the
* process never used altivec yet (MSR_VEC is zero in pt_regs of
* the context). This is very important because we must ensure we
* don't lose the VRSAVE content that may have been set prior to
* the process doing its first vector operation
* Userland shall check AT_HWCAP to know wether it can rely on the
* v_regs pointer or not.
*/
#ifdef CONFIG_ALTIVEC
elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *)
(((unsigned long)sc->vmx_reserve + 15) & ~0xful);
elf_vrreg_t __user *tm_v_regs = (elf_vrreg_t __user *)
(((unsigned long)tm_sc->vmx_reserve + 15) & ~0xful);
#endif
unsigned long msr = regs->msr;
long err = 0;
BUG_ON(!MSR_TM_ACTIVE(regs->msr));
/* Remove TM bits from thread's MSR. The MSR in the sigcontext
* just indicates to userland that we were doing a transaction, but we
* don't want to return in transactional state. This also ensures
* that flush_fp_to_thread won't set TIF_RESTORE_TM again.
*/
regs->msr &= ~MSR_TS_MASK;
flush_fp_to_thread(current);
#ifdef CONFIG_ALTIVEC
err |= __put_user(v_regs, &sc->v_regs);
err |= __put_user(tm_v_regs, &tm_sc->v_regs);
/* save altivec registers */
if (current->thread.used_vr) {
flush_altivec_to_thread(current);
/* Copy 33 vec registers (vr0..31 and vscr) to the stack */
err |= __copy_to_user(v_regs, ¤t->thread.vr_state,
33 * sizeof(vector128));
/* If VEC was enabled there are transactional VRs valid too,
* else they're a copy of the checkpointed VRs.
*/
if (msr & MSR_VEC)
err |= __copy_to_user(tm_v_regs,
¤t->thread.transact_vr,
33 * sizeof(vector128));
else
err |= __copy_to_user(tm_v_regs,
¤t->thread.vr_state,
33 * sizeof(vector128));
/* set MSR_VEC in the MSR value in the frame to indicate
* that sc->v_reg contains valid data.
*/
msr |= MSR_VEC;
}
/* We always copy to/from vrsave, it's 0 if we don't have or don't
* use altivec.
*/
if (cpu_has_feature(CPU_FTR_ALTIVEC))
current->thread.vrsave = mfspr(SPRN_VRSAVE);
err |= __put_user(current->thread.vrsave, (u32 __user *)&v_regs[33]);
if (msr & MSR_VEC)
err |= __put_user(current->thread.transact_vrsave,
(u32 __user *)&tm_v_regs[33]);
else
err |= __put_user(current->thread.vrsave,
(u32 __user *)&tm_v_regs[33]);
#else /* CONFIG_ALTIVEC */
err |= __put_user(0, &sc->v_regs);
err |= __put_user(0, &tm_sc->v_regs);
#endif /* CONFIG_ALTIVEC */
/* copy fpr regs and fpscr */
err |= c
static int lcd_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct lcd_display button_display;
unsigned long address, a;
switch (cmd) {
case LCD_On:
udelay(150);
BusyCheck();
LCDWriteInst(0x0F);
break;
case LCD_Off:
udelay(150);
BusyCheck();
LCDWriteInst(0x08);
break;
case LCD_Reset:
udelay(150);
LCDWriteInst(0x3F);
udelay(150);
LCDWriteInst(0x3F);
udelay(150);
LCDWriteInst(0x3F);
udelay(150);
LCDWriteInst(0x3F);
udelay(150);
LCDWriteInst(0x01);
udelay(150);
LCDWriteInst(0x06);
break;
case LCD_Clear:
udelay(150);
BusyCheck();
LCDWriteInst(0x01);
break;
case LCD_Cursor_Left:
udelay(150);
BusyCheck();
LCDWriteInst(0x10);
break;
case LCD_Cursor_Right:
udelay(150);
BusyCheck();
LCDWriteInst(0x14);
break;
case LCD_Cursor_Off:
udelay(150);
BusyCheck();
LCDWriteInst(0x0C);
break;
case LCD_Cursor_On:
udelay(150);
BusyCheck();
LCDWriteInst(0x0F);
break;
case LCD_Blink_Off:
udelay(150);
BusyCheck();
LCDWriteInst(0x0E);
break;
case LCD_Get_Cursor_Pos:{
struct lcd_display display;
udelay(150);
BusyCheck();
display.cursor_address = (LCDReadInst);
display.cursor_address =
(display.cursor_address & 0x07F);
if (copy_to_user
((struct lcd_display *) arg, &display,
sizeof(struct lcd_display)))
return -EFAULT;
break;
}
case LCD_Set_Cursor_Pos:{
struct lcd_display display;
if (copy_from_user
(&display, (struct lcd_display *) arg,
sizeof(struct lcd_display)))
return -EFAULT;
a = (display.cursor_address | kLCD_Addr);
udelay(150);
BusyCheck();
LCDWriteInst(a);
break;
}
case LCD_Get_Cursor:{
struct lcd_display display;
udelay(150);
BusyCheck();
display.character = LCDReadData;
if (copy_to_user
((struct lcd_display *) arg, &display,
sizeof(struct lcd_display)))
return -EFAULT;
udelay(150);
BusyCheck();
LCDWriteInst(0x10);
break;
}
case LCD_Set_Cursor:{
struct lcd_display display;
if (copy_from_user
(&display, (struct lcd_display *) arg,
sizeof(struct lcd_display)))
return -EFAULT;
udelay(150);
BusyCheck();
LCDWriteData(display.character);
udelay(150);
BusyCheck();
LCDWriteInst(0x10);
break;
}
case LCD_Disp_Left:
udelay(150);
BusyCheck();
LCDWriteInst(0x18);
break;
case LCD_Disp_Right:
udelay(150);
BusyCheck();
LCDWriteInst(0x1C);
break;
case LCD_Home:
udelay(150);
BusyCheck();
LCDWriteInst(0x02);
break;
case LCD_Write:{
struct lcd_display display;
unsigned int index;
if (copy_from_user
(&display, (struct lcd_display *) arg,
sizeof(struct lcd_display)))
return -EFAULT;
udelay(150);
BusyCheck();
LCDWriteInst(0x80);
udelay(150);
BusyCheck();
for (index = 0; index < (display.size1); index++) {
udelay(150);
BusyCheck();
LCDWriteData(display.line1[index]);
BusyCheck();
}
udelay(150);
BusyCheck();
LCDWriteInst(0xC0);
udelay(150);
BusyCheck();
for (index = 0; index < (display.size2); index++) {
udelay(150);
BusyCheck();
LCDWriteData(display.line2[index]);
}
break;
}
case LCD_Read:{
struct lcd_display display;
BusyCheck();
for (address = kDD_R00; address <= kDD_R01;
address++) {
a = (address | kLCD_Addr);
udelay(150);
BusyCheck();
LCDWriteInst(a);
udelay(150);
BusyCheck();
display.line1[address] = LCDReadData;
}
display.line1[0x27] = '\0';
for (address = kDD_R10; address <= kDD_R11;
address++) {
a = (address | kLCD_Addr);
udelay(150);
BusyCheck();
LCDWriteInst(a);
udelay(150);
BusyCheck();
display.line2[address - 0x40] =
LCDReadData;
}
display.line2[0x27] = '\0';
if (copy_to_user
((struct lcd_display *) arg, &display,
sizeof(struct lcd_display)))
return -EFAULT;
break;
}
// set all GPIO leds to led_display.leds
case LED_Set:{
struct lcd_display led_display;
if (copy_from_user
(&led_display, (struct lcd_display *) arg,
sizeof(struct lcd_display)))
return -EFAULT;
led_state = led_display.leds;
LEDSet(led_state);
break;
}
// set only bit led_display.leds
case LED_Bit_Set:{
unsigned int i;
int bit = 1;
struct lcd_display led_display;
if (copy_from_user
(&led_display, (struct lcd_display *) arg,
sizeof(struct lcd_display)))
return -EFAULT;
for (i = 0; i < (int) led_display.leds; i++) {
bit = 2 * bit;
}
led_state = led_state | bit;
LEDSet(led_state);
break;
}
// clear only bit led_display.leds
case LED_Bit_Clear:{
unsigned int i;
int bit = 1;
struct lcd_display led_display;
if (copy_from_user
(&led_display, (struct lcd_display *) arg,
sizeof(struct lcd_display)))
return -EFAULT;
for (i = 0; i < (int) led_display.leds; i++) {
bit = 2 * bit;
}
led_state = led_state & ~bit;
LEDSet(led_state);
break;
}
case BUTTON_Read:{
button_display.buttons = GPIRead;
if (copy_to_user
((struct lcd_display *) arg, &button_display,
sizeof(struct lcd_display)))
return -EFAULT;
break;
}
case LINK_Check:{
button_display.buttons =
*((volatile unsigned long *) (0xB0100060));
if (copy_to_user
((struct lcd_display *) arg, &button_display,
sizeof(struct lcd_display)))
return -EFAULT;
break;
}
case LINK_Check_2:{
int iface_num;
/* panel-utils should pass in the desired interface status is wanted for
* in "buttons" of the structure. We will set this to non-zero if the
* link is in fact up for the requested interface. --DaveM
*/
if (copy_from_user
(&button_display, (struct lcd_display *) arg,
sizeof(button_display)))
return -EFAULT;
iface_num = button_display.buttons;
#if defined(CONFIG_TULIP) && 0
if (iface_num >= 0 &&
iface_num < MAX_INTERFACES &&
linkcheck_callbacks[iface_num] != NULL) {
button_display.buttons =
linkcheck_callbacks[iface_num]
(linkcheck_cookies[iface_num]);
} else
#endif
button_display.buttons = 0;
if (__copy_to_user
((struct lcd_display *) arg, &button_display,
sizeof(struct lcd_display)))
return -EFAULT;
break;
}
default:
return -EINVAL;
}
return 0;
}
/*
* Handle {get,set,swap}_context operations
*/
int sys_swapcontext(struct ucontext __user *old_ctx,
struct ucontext __user *new_ctx,
long ctx_size, long r6, long r7, long r8, struct pt_regs *regs)
{
unsigned char tmp;
sigset_t set;
unsigned long new_msr = 0;
int ctx_has_vsx_region = 0;
if (new_ctx &&
get_user(new_msr, &new_ctx->uc_mcontext.gp_regs[PT_MSR]))
return -EFAULT;
/*
* Check that the context is not smaller than the original
* size (with VMX but without VSX)
*/
if (ctx_size < UCONTEXTSIZEWITHOUTVSX)
return -EINVAL;
/*
* If the new context state sets the MSR VSX bits but
* it doesn't provide VSX state.
*/
if ((ctx_size < sizeof(struct ucontext)) &&
(new_msr & MSR_VSX))
return -EINVAL;
/* Does the context have enough room to store VSX data? */
if (ctx_size >= sizeof(struct ucontext))
ctx_has_vsx_region = 1;
if (old_ctx != NULL) {
if (!access_ok(VERIFY_WRITE, old_ctx, ctx_size)
|| setup_sigcontext(&old_ctx->uc_mcontext, regs, 0, NULL, 0,
ctx_has_vsx_region)
|| __copy_to_user(&old_ctx->uc_sigmask,
¤t->blocked, sizeof(sigset_t)))
return -EFAULT;
}
if (new_ctx == NULL)
return 0;
if (!access_ok(VERIFY_READ, new_ctx, ctx_size)
|| __get_user(tmp, (u8 __user *) new_ctx)
|| __get_user(tmp, (u8 __user *) new_ctx + ctx_size - 1))
return -EFAULT;
/*
* If we get a fault copying the context into the kernel's
* image of the user's registers, we can't just return -EFAULT
* because the user's registers will be corrupted. For instance
* the NIP value may have been updated but not some of the
* other registers. Given that we have done the access_ok
* and successfully read the first and last bytes of the region
* above, this should only happen in an out-of-memory situation
* or if another thread unmaps the region containing the context.
* We kill the task with a SIGSEGV in this situation.
*/
if (__copy_from_user(&set, &new_ctx->uc_sigmask, sizeof(set)))
do_exit(SIGSEGV);
set_current_blocked(&set);
if (restore_sigcontext(regs, NULL, 0, &new_ctx->uc_mcontext))
do_exit(SIGSEGV);
/* This returns like rt_sigreturn */
set_thread_flag(TIF_RESTOREALL);
return 0;
}
int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
/* Handler is *really* a pointer to the function descriptor for
* the signal routine. The first entry in the function
* descriptor is the entry address of signal and the second
* entry is the TOC value we need to use.
*/
func_descr_t __user *funct_desc_ptr;
struct rt_sigframe __user *frame;
unsigned long newsp = 0;
long err = 0;
frame = get_sigframe(ka, regs, sizeof(*frame), 0);
if (unlikely(frame == NULL))
goto badframe;
err |= __put_user(&frame->info, &frame->pinfo);
err |= __put_user(&frame->uc, &frame->puc);
err |= copy_siginfo_to_user(&frame->info, info);
if (err)
goto badframe;
/* Create the ucontext. */
err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(0, &frame->uc.uc_link);
err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->gpr[1]),
&frame->uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, signr, NULL,
(unsigned long)ka->sa.sa_handler, 1);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
goto badframe;
/* Make sure signal handler doesn't get spurious FP exceptions */
current->thread.fpscr.val = 0;
/* Set up to return from userspace. */
if (vdso64_rt_sigtramp && current->mm->context.vdso_base) {
regs->link = current->mm->context.vdso_base + vdso64_rt_sigtramp;
} else {
err |= setup_trampoline(__NR_rt_sigreturn, &frame->tramp[0]);
if (err)
goto badframe;
regs->link = (unsigned long) &frame->tramp[0];
}
funct_desc_ptr = (func_descr_t __user *) ka->sa.sa_handler;
/* Allocate a dummy caller frame for the signal handler. */
newsp = ((unsigned long)frame) - __SIGNAL_FRAMESIZE;
err |= put_user(regs->gpr[1], (unsigned long __user *)newsp);
/* Set up "regs" so we "return" to the signal handler. */
err |= get_user(regs->nip, &funct_desc_ptr->entry);
/* enter the signal handler in big-endian mode */
regs->msr &= ~MSR_LE;
regs->gpr[1] = newsp;
err |= get_user(regs->gpr[2], &funct_desc_ptr->toc);
regs->gpr[3] = signr;
regs->result = 0;
if (ka->sa.sa_flags & SA_SIGINFO) {
err |= get_user(regs->gpr[4], (unsigned long __user *)&frame->pinfo);
err |= get_user(regs->gpr[5], (unsigned long __user *)&frame->puc);
regs->gpr[6] = (unsigned long) frame;
} else {
regs->gpr[4] = (unsigned long)&frame->uc.uc_mcontext;
}
if (err)
goto badframe;
return 1;
badframe:
#if DEBUG_SIG
printk("badframe in setup_rt_frame, regs=%p frame=%p newsp=%lx\n",
regs, frame, newsp);
#endif
if (show_unhandled_signals && printk_ratelimit())
printk(regs->msr & MSR_SF ? fmt64 : fmt32,
current->comm, current->pid, "setup_rt_frame",
(long)frame, regs->nip, regs->link);
force_sigsegv(signr, current);
return 0;
}
static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
int signr, sigset_t *set, unsigned long handler,
int ctx_has_vsx_region)
{
/* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the
* process never used altivec yet (MSR_VEC is zero in pt_regs of
* the context). This is very important because we must ensure we
* don't lose the VRSAVE content that may have been set prior to
* the process doing its first vector operation
* Userland shall check AT_HWCAP to know whether it can rely on the
* v_regs pointer or not
*/
#ifdef CONFIG_ALTIVEC
elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *)(((unsigned long)sc->vmx_reserve + 15) & ~0xful);
#endif
unsigned long msr = regs->msr;
long err = 0;
flush_fp_to_thread(current);
#ifdef CONFIG_ALTIVEC
err |= __put_user(v_regs, &sc->v_regs);
/* save altivec registers */
if (current->thread.used_vr) {
flush_altivec_to_thread(current);
/* Copy 33 vec registers (vr0..31 and vscr) to the stack */
err |= __copy_to_user(v_regs, current->thread.vr, 33 * sizeof(vector128));
/* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg)
* contains valid data.
*/
msr |= MSR_VEC;
}
/* We always copy to/from vrsave, it's 0 if we don't have or don't
* use altivec.
*/
err |= __put_user(current->thread.vrsave, (u32 __user *)&v_regs[33]);
#else /* CONFIG_ALTIVEC */
err |= __put_user(0, &sc->v_regs);
#endif /* CONFIG_ALTIVEC */
flush_fp_to_thread(current);
/* copy fpr regs and fpscr */
err |= copy_fpr_to_user(&sc->fp_regs, current);
/*
* Clear the MSR VSX bit to indicate there is no valid state attached
* to this context, except in the specific case below where we set it.
*/
msr &= ~MSR_VSX;
#ifdef CONFIG_VSX
/*
* Copy VSX low doubleword to local buffer for formatting,
* then out to userspace. Update v_regs to point after the
* VMX data.
*/
if (current->thread.used_vsr && ctx_has_vsx_region) {
__giveup_vsx(current);
v_regs += ELF_NVRREG;
err |= copy_vsx_to_user(v_regs, current);
/* set MSR_VSX in the MSR value in the frame to
* indicate that sc->vs_reg) contains valid data.
*/
msr |= MSR_VSX;
}
#endif /* CONFIG_VSX */
err |= __put_user(&sc->gp_regs, &sc->regs);
WARN_ON(!FULL_REGS(regs));
err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
err |= __put_user(msr, &sc->gp_regs[PT_MSR]);
err |= __put_user(signr, &sc->signal);
err |= __put_user(handler, &sc->handler);
if (set != NULL)
err |= __put_user(set->sig[0], &sc->oldmask);
return err;
}
static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs * regs)
{
struct rt_sigframe __user *frame;
struct _fpstate __user *fp = NULL;
int err = 0;
struct task_struct *me = current;
if (used_math()) {
fp = get_stack(ka, regs, sizeof(struct _fpstate));
frame = (void __user *)round_down(
(unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8;
if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate)))
goto give_sigsegv;
if (save_i387(fp) < 0)
err |= -1;
} else
frame = get_stack(ka, regs, sizeof(struct rt_sigframe)) - 8;
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
if (ka->sa.sa_flags & SA_SIGINFO) {
err |= copy_siginfo_to_user(&frame->info, info);
if (err)
goto give_sigsegv;
}
/* Create the ucontext. */
err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(0, &frame->uc.uc_link);
err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->sp),
&frame->uc.uc_stack.ss_flags);
err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0], me);
err |= __put_user(fp, &frame->uc.uc_mcontext.fpstate);
if (sizeof(*set) == 16) {
__put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]);
__put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]);
} else
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
/* x86-64 should always use SA_RESTORER. */
if (ka->sa.sa_flags & SA_RESTORER) {
err |= __put_user(ka->sa.sa_restorer, &frame->pretcode);
} else {
/* could use a vstub here */
goto give_sigsegv;
}
if (err)
goto give_sigsegv;
/* Set up registers for signal handler */
regs->di = sig;
/* In case the signal handler was declared without prototypes */
regs->ax = 0;
/* This also works for non SA_SIGINFO handlers because they expect the
next argument after the signal number on the stack. */
regs->si = (unsigned long)&frame->info;
regs->dx = (unsigned long)&frame->uc;
regs->ip = (unsigned long) ka->sa.sa_handler;
regs->sp = (unsigned long)frame;
/* Set up the CS register to run signal handlers in 64-bit mode,
even if the handler happens to be interrupting 32-bit code. */
regs->cs = __USER_CS;
return 0;
give_sigsegv:
force_sigsegv(sig, current);
return -EFAULT;
}
int ia32_setup_frame(int sig, struct ksignal *ksig,
compat_sigset_t *set, struct pt_regs *regs)
{
struct sigframe_ia32 __user *frame;
void __user *restorer;
int err = 0;
void __user *fpstate = NULL;
/* copy_to_user optimizes that into a single 8 byte store */
static const struct {
u16 poplmovl;
u32 val;
u16 int80;
} __attribute__((packed)) code = {
0xb858, /* popl %eax ; movl $...,%eax */
__NR_ia32_sigreturn,
0x80cd, /* int $0x80 */
};
frame = get_sigframe(ksig, regs, sizeof(*frame), &fpstate);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return -EFAULT;
if (__put_user(sig, &frame->sig))
return -EFAULT;
if (ia32_setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]))
return -EFAULT;
if (_COMPAT_NSIG_WORDS > 1) {
if (__copy_to_user(frame->extramask, &set->sig[1],
sizeof(frame->extramask)))
return -EFAULT;
}
if (ksig->ka.sa.sa_flags & SA_RESTORER) {
restorer = ksig->ka.sa.sa_restorer;
} else {
/* Return stub is in 32bit vsyscall page */
if (current->mm->context.vdso)
restorer = current->mm->context.vdso +
vdso_image_32.sym___kernel_sigreturn;
else
restorer = &frame->retcode;
}
put_user_try {
put_user_ex(ptr_to_compat(restorer), &frame->pretcode);
/*
* These are actually not used anymore, but left because some
* gdb versions depend on them as a marker.
*/
put_user_ex(*((u64 *)&code), (u64 __user *)frame->retcode);
} put_user_catch(err);
if (err)
return -EFAULT;
/* Set up registers for signal handler */
regs->sp = (unsigned long) frame;
regs->ip = (unsigned long) ksig->ka.sa.sa_handler;
/* Make -mregparm=3 work */
regs->ax = sig;
regs->dx = 0;
regs->cx = 0;
static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs * regs)
{
struct rt_sigframe __user *frame;
struct _fpstate __user *fp = NULL;
int err = 0;
struct task_struct *me = current;
if (used_math()) {
fp = get_stack(ka, regs, sizeof(struct _fpstate));
frame = (void __user *)round_down(
(unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8;
if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate)))
goto give_sigsegv;
if (save_i387(fp) < 0)
err |= -1;
} else
frame = get_stack(ka, regs, sizeof(struct rt_sigframe)) - 8;
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
if (ka->sa.sa_flags & SA_SIGINFO) {
err |= copy_siginfo_to_user(&frame->info, info);
if (err)
goto give_sigsegv;
}
/* Create the ucontext. */
err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(0, &frame->uc.uc_link);
err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->rsp),
&frame->uc.uc_stack.ss_flags);
err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0], me);
err |= __put_user(fp, &frame->uc.uc_mcontext.fpstate);
if (sizeof(*set) == 16) {
__put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]);
__put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]);
} else
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
/* x86-64 should always use SA_RESTORER. */
if (ka->sa.sa_flags & SA_RESTORER) {
err |= __put_user(ka->sa.sa_restorer, &frame->pretcode);
} else {
/* could use a vstub here */
goto give_sigsegv;
}
if (err)
goto give_sigsegv;
#ifdef DEBUG_SIG
printk("%d old rip %lx old rsp %lx old rax %lx\n", current->pid,regs->rip,regs->rsp,regs->rax);
#endif
/* Set up registers for signal handler */
regs->rdi = sig;
/* In case the signal handler was declared without prototypes */
regs->rax = 0;
/* This also works for non SA_SIGINFO handlers because they expect the
next argument after the signal number on the stack. */
regs->rsi = (unsigned long)&frame->info;
regs->rdx = (unsigned long)&frame->uc;
regs->rip = (unsigned long) ka->sa.sa_handler;
regs->rsp = (unsigned long)frame;
/* Set up the CS register to run signal handlers in 64-bit mode,
even if the handler happens to be interrupting 32-bit code. */
regs->cs = __USER_CS;
/* This, by contrast, has nothing to do with segment registers -
see include/asm-x86_64/uaccess.h for details. */
set_fs(USER_DS);
regs->eflags &= ~TF_MASK;
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
#ifdef DEBUG_SIG
printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
current->comm, current->pid, frame, regs->rip, frame->pretcode);
#endif
return 0;
give_sigsegv:
force_sigsegv(sig, current);
return -EFAULT;
}
int compat_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
unsigned long restorer;
struct compat_rt_sigframe __user *frame;
int err = 0;
int usig;
frame = compat_get_sigframe(ka, regs, sizeof(*frame));
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
usig = current_thread_info()->exec_domain
&& current_thread_info()->exec_domain->signal_invmap
&& sig < 32
? current_thread_info()->exec_domain->signal_invmap[sig]
: sig;
/* Always write at least the signal number for the stack backtracer. */
if (ka->sa.sa_flags & SA_SIGINFO) {
/* At sigreturn time, restore the callee-save registers too. */
err |= copy_siginfo_to_user32(&frame->info, info);
regs->flags |= PT_FLAGS_RESTORE_REGS;
} else {
err |= __put_user(info->si_signo, &frame->info.si_signo);
}
/* Create the ucontext. */
err |= __clear_user(&frame->save_area, sizeof(frame->save_area));
err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(0, &frame->uc.uc_link);
err |= __put_user(ptr_to_compat((void *)(current->sas_ss_sp)),
&frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->sp),
&frame->uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= setup_sigcontext(&frame->uc.uc_mcontext, regs);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
goto give_sigsegv;
restorer = VDSO_BASE;
if (ka->sa.sa_flags & SA_RESTORER)
restorer = ptr_to_compat_reg(ka->sa.sa_restorer);
/*
* Set up registers for signal handler.
* Registers that we don't modify keep the value they had from
* user-space at the time we took the signal.
*/
regs->pc = ptr_to_compat_reg(ka->sa.sa_handler);
regs->ex1 = PL_ICS_EX1(USER_PL, 1); /* set crit sec in handler */
regs->sp = ptr_to_compat_reg(frame);
regs->lr = restorer;
regs->regs[0] = (unsigned long) usig;
if (ka->sa.sa_flags & SA_SIGINFO) {
/* Need extra arguments, so mark to restore caller-saves. */
regs->regs[1] = ptr_to_compat_reg(&frame->info);
regs->regs[2] = ptr_to_compat_reg(&frame->uc);
regs->flags |= PT_FLAGS_CALLER_SAVES;
}
/*
* Notify any tracer that was single-stepping it.
* The tracer may want to single-step inside the
* handler too.
*/
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
return 0;
give_sigsegv:
force_sigsegv(sig, current);
return -EFAULT;
}
static int
setup_signal_frame(
unsigned long signum,
siginfo_t * siginfo,
struct sigaction * sigact,
sigset_t * oldset,
struct pt_regs * regs
)
{
struct rt_sigframe __user *frame;
struct _fpstate __user *fp;
int err = 0;
fp = get_stack(regs, sizeof(struct _fpstate));
frame = (void __user *)round_down(
(unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8;
if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate)))
goto give_sigsegv;
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
// Save essential state needed by sys_rt_sigreturn() to user-stack
err |= save_ptregs_to_user_stack(&frame->uc.uc_mcontext, regs);
err |= save_fpu_state_to_user_stack(&frame->uc.uc_mcontext, fp);
err |= __copy_to_user(&frame->uc.uc_sigmask, oldset, sizeof(*oldset));
// Save other misc-state to user-stack. Userspace might expect
// this stuff but kernel does not need it for sys_rt_sigreturn()
err |= save_misc_state_to_user_stack(frame, oldset);
err |= copy_siginfo_to_user(&frame->siginfo, siginfo);
// Setup for return from userspace signal handler.
// When signal handler returns, &frame->pretcode is executed,
// which then calls sys_rt_sigreturn().
err |= __put_user(sigact->sa_restorer, &frame->pretcode);
if (err)
goto give_sigsegv;
// Set up registers for signal handler
regs->rsp = (unsigned long)frame;
regs->cs = __USER_CS;
regs->rax = 0;
regs->rdi = signum; // ARG0
regs->rsi = (unsigned long)&frame->siginfo; // ARG1
regs->rdx = (unsigned long)&frame->uc; // ARG2
regs->rip = (unsigned long)sigact->sa_handler; // signal handler()
// This has nothing to do with segment registers -
// see include/asm-x86_64/uaccess.h for details.
set_fs(USER_DS);
return 1;
give_sigsegv:
//force_sigsegv(signum, current)
printk("GIVE_SIGSEGV\n");
return 0;
}
