Пример #1
0
static void mainboard_init(device_t dev)
{
	/* This sneaked in here, because X200 SuperIO chip isn't really
	   connected to anything and hence we don't init it.
	 */
	pc_keyboard_init();
}
Пример #2
0
//----------------------------------------------------------------------------------
// Function:            lpc47n227_init
// Parameters:          dev - pointer to structure describing a Super I/O device
// Return Value:        None
// Description:         Initialize the specified Super I/O device.
//                      Devices other than COM ports and keyboard controller are ignored.
//                      For COM ports, we configure the baud rate.
//
static void lpc47n227_init(device_t dev)
{
	struct superio_smsc_lpc47n227_config *conf = dev->chip_info;
	struct resource *res0;

	if (!dev->enabled)
		return;

	switch (dev->path.pnp.device) {
	case LPC47N227_SP1:
		res0 = find_resource(dev, PNP_IDX_IO0);
		init_uart8250(res0->base, &conf->com1);
		break;

	case LPC47N227_SP2:
		res0 = find_resource(dev, PNP_IDX_IO0);
		init_uart8250(res0->base, &conf->com2);
		break;

	case LPC47N227_KBDC:
		printk(BIOS_DEBUG, "LPC47N227: Initializing keyboard.\n");
		pc_keyboard_init(&conf->keyboard);
		break;
	}
}
Пример #3
0
static void init(struct device *dev)
{
	u8 reg8;

	if (!dev->enabled)
		return;

	switch(dev->path.pnp.device) {
	case PC97307_KBCK:
		pnp_set_logical_device(dev);
		pnp_set_enable(dev, 0);		   /* Disable keyboard */
		pnp_write_config(dev, 0xf0, 0x40); /* Set KBC clock to 8 MHz. */
		pnp_set_enable(dev, 1);		   /* Enable keyboard. */
		pc_keyboard_init();
		break;
	case PC97307_FDC:
		/* Set up floppy in PS/2 mode. */
		outb(0x09, SIO_CONFIG_RA);
		reg8 = inb(SIO_CONFIG_RD);
		reg8 = (reg8 & 0x3F) | 0x40;
		outb(reg8, SIO_CONFIG_RD);
		outb(reg8, SIO_CONFIG_RD); /* Have to write twice to change! */
		break;
	default:
		break;
	}
}
Пример #4
0
static void qemu_nb_init(device_t dev)
{
	/* Map memory at 0xc0000 - 0xfffff */
	int i;
	uint8_t v = pci_read_config8(dev, Q35_PAM0);
	v |= 0x30;
	pci_write_config8(dev, Q35_PAM0, v);
	pci_write_config8(dev, Q35_PAM0 + 1, 0x33);
	pci_write_config8(dev, Q35_PAM0 + 2, 0x33);
	pci_write_config8(dev, Q35_PAM0 + 3, 0x33);
	pci_write_config8(dev, Q35_PAM0 + 4, 0x33);
	pci_write_config8(dev, Q35_PAM0 + 5, 0x33);
	pci_write_config8(dev, Q35_PAM0 + 6, 0x33);

	/* This sneaked in here, because Qemu does not
	 * emulate a SuperIO chip
	 */
	pc_keyboard_init(NO_AUX_DEVICE);

	/* setup IRQ routing for pci slots */
	for (i = 0; i < 25; i++)
		pci_assign_irqs(0, i, qemu_q35_irqs + (i % 4));
	/* setup IRQ routing southbridge devices */
	for (i = 25; i < 32; i++)
		pci_assign_irqs(0, i, qemu_q35_irqs);
}
Пример #5
0
static void mainboard_init(device_t dev)
{
	printk(BIOS_SPEW, "starting SPI configuration\n");

	/* Configure SPI.  */
	RCBA32(0x3800) = 0x07ff0500;
	RCBA32(0x3804) = 0x3f046008;
	RCBA32(0x3808) = 0x0058efc0;
	RCBA32(0x384c) = 0x92000000;
	RCBA32(0x3850) = 0x00000a0b;
	RCBA32(0x3858) = 0x07ff0500;
	RCBA32(0x385c) = 0x04ff0003;
	RCBA32(0x3860) = 0x00020001;
	RCBA32(0x3864) = 0x00000fff;
	RCBA32(0x3874) = 0;
	RCBA32(0x3890) = 0xf8400000;
	RCBA32(0x3894) = 0x143b5006;
	RCBA32(0x3898) = 0x05200302;
	RCBA32(0x389c) = 0x0601209f;
	RCBA32(0x38b0) = 0x00000004;
	RCBA32(0x38b4) = 0x03040002;
	RCBA32(0x38c8) = 0x00002005;
	RCBA32(0x38c4) = 0x00802005;
	RCBA32(0x38c0) = 0x00000007;
	RCBA32(0x3804) = 0x3f04e008;

	printk(BIOS_SPEW, "SPI configured\n");
	/* This sneaked in here, because X201 SuperIO chip isn't really
	   connected to anything and hence we don't init it.
	 */
	pc_keyboard_init();
}
static void mainboard_init(device_t dev)
{
	RCBA32(0x38c8) = 0x00002005;
	RCBA32(0x38c4) = 0x00802005;
	RCBA32(0x38c0) = 0x00000007;
	/* FIXME: trim this down or remove if necessary */
	{
		int i;
		const u8 dmp[256] = {
			/* 00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			/* 10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			/* 20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			/* 30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			/* 40 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			/* 50 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			/* 60 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			/* 70 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			/* 80 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			/* 90 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			/* a0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			/* b0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			/* c0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			/* d0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			/* e0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
			/* f0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
		};

		printk(BIOS_DEBUG, "Replaying EC dump ...");
		for (i = 0; i < 256; i++)
			ec_write (i, dmp[i]);
		printk(BIOS_DEBUG, "done\n");
	}
	pc_keyboard_init();
}
Пример #7
0
static void w83627uhg_init(struct device *dev)
{

	if (!dev->enabled)
		return;

	switch (dev->path.pnp.device) {
	case W83627UHG_SP1:
		set_uart_clock_source(dev, 0);
		break;
	case W83627UHG_SP2:
		set_uart_clock_source(dev, 0);
		break;
	case W83627UHG_SP3:
		set_uart_clock_source(dev, 0);
		break;
	case W83627UHG_SP4:
		set_uart_clock_source(dev, 0);
		break;
	case W83627UHG_SP5:
		set_uart_clock_source(dev, 0);
		break;
	case W83627UHG_SP6:
		set_uart_clock_source(dev, 0);
		break;
	case W83627UHG_KBC:
		pc_keyboard_init(NO_AUX_DEVICE);
		break;
	}
}
Пример #8
0
static void it8712f_init(device_t dev)
{
	struct superio_ite_it8712f_config *conf = dev->chip_info;

	if (!dev->enabled)
		return;

	switch (dev->path.pnp.device) {
	case IT8712F_FDC: /* TODO. */
		break;
	case IT8712F_PP: /* TODO. */
		break;
	case IT8712F_EC: /* TODO. */
		break;
	case IT8712F_KBCK:
		set_kbc_ps2_mode();
		pc_keyboard_init(&conf->keyboard);
		break;
	case IT8712F_KBCM: /* TODO. */
		break;
	case IT8712F_MIDI: /* TODO. */
		break;
	case IT8712F_GAME: /* TODO. */
		break;
	case IT8712F_IR: /* TODO. */
		break;
	}
}
Пример #9
0
static void init(device_t dev)
{
	struct superio_nsc_pc87427_config *conf;
	struct resource *res0, *res1;
	/* Wishlist handle well known programming interfaces more
	 * generically.
	 */
	if (!dev->enabled) {
		return;
	}
	conf = dev->chip_info;
	switch(dev->path.pnp.device) {
	case PC87427_SP1:
		res0 = find_resource(dev, PNP_IDX_IO0);
		init_uart8250(res0->base, &conf->com1);
		break;
	case PC87427_SP2:
		res0 = find_resource(dev, PNP_IDX_IO0);
		init_uart8250(res0->base, &conf->com2);
		break;
	case PC87427_KBCK:
		res0 = find_resource(dev, PNP_IDX_IO0);
		res1 = find_resource(dev, PNP_IDX_IO1);
		pc_keyboard_init(&conf->keyboard);
		break;
	}
}
Пример #10
0
static void it8712f_init(struct device *dev)
{

	if (!dev->enabled)
		return;

	switch (dev->path.pnp.device) {
	case IT8712F_FDC: /* TODO. */
		break;
	case IT8712F_PP: /* TODO. */
		break;
	case IT8712F_EC: /* TODO. */
		break;
	case IT8712F_KBCK:
		set_kbc_ps2_mode();
		pc_keyboard_init();
		break;
	case IT8712F_KBCM: /* TODO. */
		break;
	case IT8712F_MIDI: /* TODO. */
		break;
	case IT8712F_GAME: /* TODO. */
		break;
	case IT8712F_IR: /* TODO. */
		break;
	}
}
Пример #11
0
static void init(device_t dev)
{
	struct superio_smsc_fdc37m60x_config *conf;
	struct resource *res0, *res1;

	if (!dev->enabled) {
		return;
	}

	conf = dev->chip_info;

	switch (dev->path.pnp.device) {
	case FDC37M60X_FDC: /* TODO. */
		break;
	case FDC37M60X_PP: /* TODO. */
		break;
	case FDC37M60X_SP1:
		res0 = find_resource(dev, PNP_IDX_IO0);
		init_uart8250(res0->base, &conf->com1);
		break;
	case FDC37M60X_SP2:
		res0 = find_resource(dev, PNP_IDX_IO0);
		init_uart8250(res0->base, &conf->com2);
		break;
	case FDC37M60X_KBCK:
		res0 = find_resource(dev, PNP_IDX_IO0);
		res1 = find_resource(dev, PNP_IDX_IO1);
		pc_keyboard_init(&conf->keyboard);
		break;
	case FDC37M60X_AUX: /* TODO. */
		break;
	}
}
Пример #12
0
static void wilco_ec_init(struct device *dev)
{
	if (!dev->enabled)
		return;

	/* Disable S0ix support in EC RAM with ACPI EC interface */
	if (!acpi_is_wakeup_s3()) {
		ec_set_ports(CONFIG_EC_BASE_ACPI_COMMAND,
			     CONFIG_EC_BASE_ACPI_DATA);
		ec_write(EC_RAM_S0IX_SUPPORT, 0);
	}

	/* Print EC firmware information */
	wilco_ec_print_all_info();

	/* Initialize keyboard, ignore emulated PS/2 mouse */
	pc_keyboard_init(NO_AUX_DEVICE);

	/* Direct power button to the host for processing */
	wilco_ec_send(KB_POWER_BUTTON_TO_HOST, 1);

	/* Unmute speakers */
	wilco_ec_send(KB_HW_MUTE_CONTROL, AUDIO_UNMUTE_125MS);

	/* Enable WiFi radio */
	wilco_ec_radio_control(RADIO_WIFI, 1);

	/* Turn on camera power */
	wilco_ec_send(KB_CAMERA, CAMERA_ON);
}
Пример #13
0
static void lpc_ec_init(struct device *dev)
{
	if (!dev->enabled)
		return;

	pc_keyboard_init(NO_AUX_DEVICE);
	google_chromeec_init();
}
Пример #14
0
static void mainboard_init(device_t dev)
{
	RCBA32(0x38c8) = 0x00002005;
	RCBA32(0x38c4) = 0x00802005;
	RCBA32(0x38c0) = 0x00000007;

	pc_keyboard_init();
}
Пример #15
0
static void it8518_init(struct device *dev)
{
	if (!dev->enabled)
		return;

	printk(BIOS_DEBUG, "Quanta IT8518: Initializing keyboard.\n");
	pc_keyboard_init();
}
Пример #16
0
static void lpc_ec_init(device_t dev)
{
	if (!dev->enabled)
		return;

	pc_keyboard_init();
	google_chromeec_init();
}
Пример #17
0
static void ene932_init(struct device *dev)
{
	if (!dev->enabled)
		return;

	printk(BIOS_DEBUG, "Compal ENE932: Initializing keyboard.\n");
	pc_keyboard_init();

}
Пример #18
0
static void ene_kb3940q_init(struct device *dev)
{
	if (!dev->enabled)
		return;

	printk(BIOS_DEBUG, "Quanta EnE KB3940Q: Initializing keyboard.\n");
	pc_keyboard_init(NO_AUX_DEVICE);

	ene_kb3940q_log_events();
}
Пример #19
0
static void it8772f_init(device_t dev)
{
	struct superio_ite_it8772f_config *conf = dev->chip_info;
	struct resource *res;

	if (!dev->enabled)
		return;

	switch (dev->path.pnp.device) {
	case IT8772F_EC:
		res = find_resource(dev, PNP_IDX_IO0);
		if (!res)
			break;

		/* Enable PECI if configured */
		it8772f_enable_peci(res, conf->peci_tmpin);

		/* Enable FANx if configured */
		if (conf->fan1_enable)
			it8772f_enable_fan(res, 1);
		if (conf->fan2_enable)
			it8772f_enable_fan(res, 2);
		if (conf->fan3_enable)
			it8772f_enable_fan(res, 3);
		break;
	case IT8772F_GPIO:
		/* Set GPIO output levels */
		res = find_resource(dev, PNP_IDX_IO1);
		if (res) {
			if (conf->gpio_set1)
				outb(conf->gpio_set1, res->base + 0);
			if (conf->gpio_set2)
				outb(conf->gpio_set2, res->base + 1);
			if (conf->gpio_set3)
				outb(conf->gpio_set3, res->base + 2);
			if (conf->gpio_set4)
				outb(conf->gpio_set4, res->base + 3);
			if (conf->gpio_set5)
				outb(conf->gpio_set5, res->base + 4);
			if (conf->gpio_set6)
				outb(conf->gpio_set6, res->base + 5);
		}
		break;
	case IT8772F_KBCK:
		if (!conf->skip_keyboard) {
			set_kbc_ps2_mode();
			pc_keyboard_init(&conf->keyboard);
		}
		break;
	case IT8772F_KBCM:
		break;
	case IT8772F_IR:
		break;
	}
}
Пример #20
0
static void init(struct device *dev)
{
	if (!dev->enabled)
		return;

	switch (dev->path.pnp.device) {
	case PC87360_KBCK:
		pc_keyboard_init(NO_AUX_DEVICE);
		break;
	}
}
Пример #21
0
static void mainboard_init(device_t dev)
{
	RCBA32(0x38c8) = 0x00002005;
	RCBA32(0x38c4) = 0x00802005;
	RCBA32(0x38c0) = 0x00000007;

	/* This sneaked in here, because X201 SuperIO chip isn't really
	   connected to anything and hence we don't init it.
	 */
	pc_keyboard_init();
}
Пример #22
0
static void nct6791d_init(struct device *dev)
{
	if (!dev->enabled)
		return;

	switch (dev->path.pnp.device) {
	case NCT6791D_KBC:
		pc_keyboard_init(NO_AUX_DEVICE);
		break;
	}
}
Пример #23
0
/**
 * Initialize the specified Super I/O device.
 *
 * Devices other than COM ports and the keyboard controller are ignored.
 * For COM ports, we configure the baud rate.
 *
 * @param dev Pointer to structure describing a Super I/O device.
 */
static void lpc47m10x_init(struct device *dev)
{
	if (!dev->enabled)
		return;

	switch (dev->path.pnp.device) {
	case LPC47M10X2_KBC:
		pc_keyboard_init(NO_AUX_DEVICE);
		break;
	}
}
Пример #24
0
static void keyboard_on(struct device *dev)
{
	u8 regval;

	regval = pci_read_config8(dev, 0x51);
	regval |= 0x05;
	regval &= 0xfd;
	pci_write_config8(dev, 0x51, regval);

	pc_keyboard_init(0);
}
Пример #25
0
static void nct6779d_init(struct device *dev)
{
	if (!dev->enabled)
		return;

	switch(dev->path.pnp.device) {
	/* TODO: Might potentially need code for HWM or FDC etc. */
	case NCT6779D_KBC:
		pc_keyboard_init();
		break;
	}
}
Пример #26
0
static void init(struct device *dev)
{

	if (!dev->enabled)
		return;

	switch(dev->path.pnp.device) {
	case WPCM450_KBCK:
		pc_keyboard_init();
		break;
	}
}
Пример #27
0
static void init(device_t dev)
{

	if (!dev->enabled)
		return;

	switch(dev->path.pnp.device) {
	case PC87427_KBCK:
		pc_keyboard_init();
		break;
	}
}
Пример #28
0
static void mainboard_enable(device_t dev)
{
	ec_setup();
	/* LCD panel type is SIO GPIO40-43.
	   It's controlled by a DIP switch but was always
	   set to 4 while only values of 5 and 6 worked. */
	install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, (inb(0x60f) & 0x0f) + 1);

	/* We have no driver for the embedded controller since the firmware
	   does most of the job. Hence, initialize keyboards here. */
	pc_keyboard_init();
}
Пример #29
0
static void sch4037_init(struct device *dev)
{
	if (!dev->enabled) {
		return;
	}

	switch(dev->path.pnp.device) {
		case SCH4037_KBC:
			pc_keyboard_init();
			break;
	}
}
Пример #30
0
static void ene932_init(device_t dev)
{
	struct ec_compal_ene932_config *conf = dev->chip_info;


	if (!dev->enabled)
		return;

	printk(BIOS_DEBUG, "Compal ENE932: Initializing keyboard.\n");
	pc_keyboard_init(&conf->keyboard);

}