static int set_init_properties_action(int nargs, char **args)
{
char tmp[PROP_VALUE_MAX];
if (qemu[0])
import_kernel_cmdline(1, import_kernel_nv);
if (!strcmp(bootmode,"tcc_factory"))
property_set("ro.tcc.factorytest", "1");
else if(!strcmp(bootmode, "factory"))
property_set("ro.factorytest", "1");
else if (!strcmp(bootmode,"factory2"))
property_set("ro.factorytest", "2");
else
property_set("ro.factorytest", "0");
property_set("ro.serialno", serialno[0] ? serialno : "");
property_set("ro.bootmode", bootmode[0] ? bootmode : "unknown");
property_set("ro.baseband", baseband[0] ? baseband : "unknown");
property_set("ro.carrier", carrier[0] ? carrier : "unknown");
property_set("ro.bootloader", bootloader[0] ? bootloader : "unknown");
property_set("ro.btaddr", btaddr[0] ? btaddr : "");
if (modelno[0])
property_set("ro.boot.modelno", modelno);
property_set("ro.hardware", hardware);
snprintf(tmp, PROP_VALUE_MAX, "%d", revision);
property_set("ro.revision", tmp);
return 0;
}
void handle_property_set_fd()
{
prop_msg msg;
int s;
int r;
int res;
struct ucred cr;
struct sockaddr_un addr;
socklen_t addr_size = sizeof(addr);
socklen_t cr_size = sizeof(cr);
char * source_ctx = NULL;
struct pollfd ufds[1];
const int timeout_ms = 2 * 1000; /* Default 2 sec timeout for caller to send property. */
int nr;
if ((s = accept(property_set_fd, (struct sockaddr *) &addr, &addr_size)) < 0) {
return;
}
/* Check socket options here */
if (getsockopt(s, SOL_SOCKET, SO_PEERCRED, &cr, &cr_size) < 0) {
close(s);
ERROR("Unable to receive socket options\n");
return;
}
ufds[0].fd = s;
ufds[0].events = POLLIN;
ufds[0].revents = 0;
nr = TEMP_FAILURE_RETRY(poll(ufds, 1, timeout_ms));
if (nr == 0) {
ERROR("sys_prop: timeout waiting for pid=%d uid=%d gid=%d to send property message.\n", cr.pid, cr.uid, cr.gid);
close(s);
return;
} else if (nr < 0) {
ERROR("sys_prop: error waiting for pid=%d uid=%d gid=%d to send property message. err=%d %s\n", cr.pid, cr.uid, cr.gid, errno, strerror(errno));
close(s);
return;
}
r = TEMP_FAILURE_RETRY(recv(s, &msg, sizeof(msg), MSG_DONTWAIT));
if(r != sizeof(prop_msg)) {
ERROR("sys_prop: mis-match msg size received: %d from pid=%d uid=%d gid=%d expected: %zu errno: %d\n",
r, cr.pid, cr.uid, cr.gid, sizeof(prop_msg), errno);
close(s);
return;
}
switch(msg.cmd) {
case PROP_MSG_SETPROP:
msg.name[PROP_NAME_MAX-1] = 0;
msg.value[PROP_VALUE_MAX-1] = 0;
if (!is_legal_property_name(msg.name, strlen(msg.name))) {
ERROR("sys_prop: illegal property name. Got: \"%s\"\n", msg.name);
close(s);
return;
}
getpeercon(s, &source_ctx);
if(memcmp(msg.name,"ctl.",4) == 0) {
// Keep the old close-socket-early behavior when handling
// ctl.* properties.
close(s);
if (check_control_mac_perms(msg.value, source_ctx)) {
#ifdef MTK_INIT
INFO("[PropSet]: pid:%u uid:%u gid:%u %s %s\n", cr.pid, cr.uid, cr.gid, msg.name, msg.value);
#endif
handle_control_message((char*) msg.name + 4, (char*) msg.value);
} else {
ERROR("sys_prop: Unable to %s service ctl [%s] uid:%d gid:%d pid:%d\n",
msg.name + 4, msg.value, cr.uid, cr.gid, cr.pid);
}
} else {
if (check_perms(msg.name, source_ctx)) {
#ifdef MTK_INIT
INFO("[PropSet]: pid:%u uid:%u gid:%u set %s=%s\n", cr.pid, cr.uid, cr.gid, msg.name, msg.value);
if(strcmp(msg.name, ANDROID_RB_PROPERTY) == 0)
{
INFO("pid %d set %s=%s\n", cr.pid, msg.name, msg.value);
reboot_pid(cr.pid);
}
#endif
property_set((char*) msg.name, (char*) msg.value);
} else {
ERROR("sys_prop: permission denied uid:%d name:%s\n",
cr.uid, msg.name);
}
// Note: bionic's property client code assumes that the
// property server will not close the socket until *AFTER*
// the property is written to memory.
close(s);
}
freecon(source_ctx);
break;
default:
close(s);
break;
}
}
void Settings::set(const QString& name, const QString& value)
{
property_set(name.toUtf8(), value.toUtf8());
emit valueChanged(name, value);
}
static void
stop_adbd() {
property_set("ctl.stop", "adbd");
set_usb_driver(0);
}
int main(int argc, char **argv) {
// Recovery needs to install world-readable files, so clear umask
// set by init
umask(0);
Log_Offset = 0;
// Set up temporary log file (/tmp/recovery.log)
freopen(TMP_LOG_FILE, "a", stdout);
setbuf(stdout, NULL);
freopen(TMP_LOG_FILE, "a", stderr);
setbuf(stderr, NULL);
// Handle ADB sideload
if (argc == 3 && strcmp(argv[1], "--adbd") == 0) {
adb_main(argv[2]);
return 0;
}
char crash_prop_val[PROPERTY_VALUE_MAX];
int crash_counter;
property_get("twrp.crash_counter", crash_prop_val, "-1");
crash_counter = atoi(crash_prop_val) + 1;
snprintf(crash_prop_val, sizeof(crash_prop_val), "%d", crash_counter);
property_set("twrp.crash_counter", crash_prop_val);
time_t StartupTime = time(NULL);
printf("Starting TWRP %s on %s", TW_VERSION_STR, ctime(&StartupTime));
// Load default values to set DataManager constants and handle ifdefs
DataManager::SetDefaultValues();
printf("Starting the UI...");
gui_init();
printf("=> Linking mtab\n");
symlink("/proc/mounts", "/etc/mtab");
if (TWFunc::Path_Exists("/etc/twrp.fstab")) {
if (TWFunc::Path_Exists("/etc/recovery.fstab")) {
printf("Renaming regular /etc/recovery.fstab -> /etc/recovery.fstab.bak\n");
rename("/etc/recovery.fstab", "/etc/recovery.fstab.bak");
}
printf("Moving /etc/twrp.fstab -> /etc/recovery.fstab\n");
rename("/etc/twrp.fstab", "/etc/recovery.fstab");
}
printf("=> Processing recovery.fstab\n");
if (!PartitionManager.Process_Fstab("/etc/recovery.fstab", 1)) {
LOGERR("Failing out of recovery due to problem with recovery.fstab.\n");
return -1;
}
PartitionManager.Output_Partition_Logging();
// Load up all the resources
gui_loadResources();
#ifdef HAVE_SELINUX
if (TWFunc::Path_Exists("/prebuilt_file_contexts")) {
if (TWFunc::Path_Exists("/file_contexts")) {
printf("Renaming regular /file_contexts -> /file_contexts.bak\n");
rename("/file_contexts", "/file_contexts.bak");
}
printf("Moving /prebuilt_file_contexts -> /file_contexts\n");
rename("/prebuilt_file_contexts", "/file_contexts");
}
struct selinux_opt selinux_options[] = {
{ SELABEL_OPT_PATH, "/file_contexts" }
};
selinux_handle = selabel_open(SELABEL_CTX_FILE, selinux_options, 1);
if (!selinux_handle)
printf("No file contexts for SELinux\n");
else
printf("SELinux contexts loaded from /file_contexts\n");
{ // Check to ensure SELinux can be supported by the kernel
char *contexts = NULL;
if (PartitionManager.Mount_By_Path("/cache", true) && TWFunc::Path_Exists("/cache/recovery")) {
lgetfilecon("/cache/recovery", &contexts);
if (!contexts) {
lsetfilecon("/cache/recovery", "test");
lgetfilecon("/cache/recovery", &contexts);
}
} else {
LOGINFO("Could not check /cache/recovery SELinux contexts, using /sbin/teamwin instead which may be inaccurate.\n");
lgetfilecon("/sbin/teamwin", &contexts);
}
if (!contexts) {
gui_print_color("warning", "Kernel does not have support for reading SELinux contexts.\n");
} else {
free(contexts);
gui_print("Full SELinux support is present.\n");
}
}
#else
gui_print_color("warning", "No SELinux support (no libselinux).\n");
#endif
PartitionManager.Mount_By_Path("/cache", true);
string Zip_File, Reboot_Value;
bool Cache_Wipe = false, Factory_Reset = false, Perform_Backup = false;
{
TWPartition* misc = PartitionManager.Find_Partition_By_Path("/misc");
if (misc != NULL) {
if (misc->Current_File_System == "emmc") {
set_device_type('e');
set_device_name(misc->Actual_Block_Device.c_str());
} else if (misc->Current_File_System == "mtd") {
set_device_type('m');
set_device_name(misc->MTD_Name.c_str());
} else {
LOGERR("Unknown file system for /misc\n");
}
}
get_args(&argc, &argv);
int index, index2, len;
char* argptr;
char* ptr;
printf("Startup Commands: ");
for (index = 1; index < argc; index++) {
argptr = argv[index];
printf(" '%s'", argv[index]);
len = strlen(argv[index]);
if (*argptr == '-') {argptr++; len--;}
if (*argptr == '-') {argptr++; len--;}
if (*argptr == 'u') {
ptr = argptr;
index2 = 0;
while (*ptr != '=' && *ptr != '\n')
ptr++;
// skip the = before grabbing Zip_File
while (*ptr == '=')
ptr++;
if (*ptr) {
Zip_File = ptr;
} else
LOGERR("argument error specifying zip file\n");
} else if (*argptr == 'w') {
if (len == 9)
Factory_Reset = true;
else if (len == 10)
Cache_Wipe = true;
} else if (*argptr == 'n') {
Perform_Backup = true;
} else if (*argptr == 's') {
ptr = argptr;
index2 = 0;
while (*ptr != '=' && *ptr != '\n')
ptr++;
if (*ptr) {
Reboot_Value = *ptr;
}
}
}
printf("\n");
}
if(crash_counter == 0) {
property_list(Print_Prop, NULL);
printf("\n");
} else {
printf("twrp.crash_counter=%d\n", crash_counter);
}
// Check for and run startup script if script exists
TWFunc::check_and_run_script("/sbin/runatboot.sh", "boot");
TWFunc::check_and_run_script("/sbin/postrecoveryboot.sh", "boot");
#ifdef TW_INCLUDE_INJECTTWRP
// Back up TWRP Ramdisk if needed:
TWPartition* Boot = PartitionManager.Find_Partition_By_Path("/boot");
LOGINFO("Backing up TWRP ramdisk...\n");
if (Boot == NULL || Boot->Current_File_System != "emmc")
TWFunc::Exec_Cmd("injecttwrp --backup /tmp/backup_recovery_ramdisk.img");
else {
string injectcmd = "injecttwrp --backup /tmp/backup_recovery_ramdisk.img bd=" + Boot->Actual_Block_Device;
TWFunc::Exec_Cmd(injectcmd);
}
LOGINFO("Backup of TWRP ramdisk done.\n");
#endif
bool Keep_Going = true;
if (Perform_Backup) {
DataManager::SetValue(TW_BACKUP_NAME, "(Auto Generate)");
if (!OpenRecoveryScript::Insert_ORS_Command("backup BSDCAE\n"))
Keep_Going = false;
}
if (Keep_Going && !Zip_File.empty()) {
string ORSCommand = "install " + Zip_File;
if (!OpenRecoveryScript::Insert_ORS_Command(ORSCommand))
Keep_Going = false;
}
if (Keep_Going) {
if (Factory_Reset) {
if (!OpenRecoveryScript::Insert_ORS_Command("wipe data\n"))
Keep_Going = false;
} else if (Cache_Wipe) {
if (!OpenRecoveryScript::Insert_ORS_Command("wipe cache\n"))
Keep_Going = false;
}
}
TWFunc::Update_Log_File();
// Offer to decrypt if the device is encrypted
if (DataManager::GetIntValue(TW_IS_ENCRYPTED) != 0) {
LOGINFO("Is encrypted, do decrypt page first\n");
if (gui_startPage("decrypt") != 0) {
LOGERR("Failed to start decrypt GUI page.\n");
}
}
// Read the settings file
DataManager::ReadSettingsFile();
// Fixup the RTC clock on devices which require it
if(crash_counter == 0)
TWFunc::Fixup_Time_On_Boot();
// Run any outstanding OpenRecoveryScript
if (DataManager::GetIntValue(TW_IS_ENCRYPTED) == 0 && (TWFunc::Path_Exists(SCRIPT_FILE_TMP) || TWFunc::Path_Exists(SCRIPT_FILE_CACHE))) {
OpenRecoveryScript::Run_OpenRecoveryScript();
}
// Launch the main GUI
gui_start();
// Check for su to see if the device is rooted or not
if (PartitionManager.Mount_By_Path("/system", false)) {
// Disable flashing of stock recovery
if (TWFunc::Path_Exists("/system/recovery-from-boot.p")) {
rename("/system/recovery-from-boot.p", "/system/recovery-from-boot.bak");
gui_print("Renamed stock recovery file in /system to prevent\nthe stock ROM from replacing TWRP.\n");
}
if (TWFunc::Path_Exists("/supersu/su") && !TWFunc::Path_Exists("/system/bin/su") && !TWFunc::Path_Exists("/system/xbin/su") && !TWFunc::Path_Exists("/system/bin/.ext/.su")) {
// Device doesn't have su installed
DataManager::SetValue("tw_busy", 1);
if (gui_startPage("installsu") != 0) {
LOGERR("Failed to start SuperSU install page.\n");
}
} else if (TWFunc::Check_su_Perms() > 0) {
// su perms are set incorrectly
LOGINFO("Root permissions appear to be lost... fixing. (This will always happen on 4.3+ ROMs with SELinux.\n");
TWFunc::Fix_su_Perms();
}
sync();
PartitionManager.UnMount_By_Path("/system", false);
}
// Reboot
TWFunc::Update_Intent_File(Reboot_Value);
TWFunc::Update_Log_File();
gui_print("Rebooting...\n");
string Reboot_Arg;
DataManager::GetValue("tw_reboot_arg", Reboot_Arg);
if (Reboot_Arg == "recovery")
TWFunc::tw_reboot(rb_recovery);
else if (Reboot_Arg == "poweroff")
TWFunc::tw_reboot(rb_poweroff);
else if (Reboot_Arg == "bootloader")
TWFunc::tw_reboot(rb_bootloader);
else if (Reboot_Arg == "download")
TWFunc::tw_reboot(rb_download);
else
TWFunc::tw_reboot(rb_system);
#ifdef ANDROID_RB_RESTART
android_reboot(ANDROID_RB_RESTART, 0, 0);
#else
reboot(RB_AUTOBOOT);
#endif
return 0;
}
void ScreenRecoveryUI::ToggleRainbowMode()
{
rainbow = rainbow ? false : true;
set_rainbow_mode(rainbow);
property_set("sys.rainbow.recovery", rainbow ? "1" : "0");
}
ECode CLauncherHelper::CloseBootanimation()
{
property_set("ctl.stop", "bootanim");
return NOERROR;
}
void WifiDisplaySource::onMessageReceived(const sp<AMessage> &msg) {
switch (msg->what()) {
case kWhatStart:
{
uint32_t replyID;
CHECK(msg->senderAwaitsResponse(&replyID));
AString iface;
CHECK(msg->findString("iface", &iface));
status_t err = OK;
ssize_t colonPos = iface.find(":");
unsigned long port;
if (colonPos >= 0) {
const char *s = iface.c_str() + colonPos + 1;
char *end;
port = strtoul(s, &end, 10);
if (end == s || *end != '\0' || port > 65535) {
err = -EINVAL;
} else {
iface.erase(colonPos, iface.size() - colonPos);
}
} else {
port = kWifiDisplayDefaultPort;
}
if (err == OK) {
if (inet_aton(iface.c_str(), &mInterfaceAddr) != 0) {
sp<AMessage> notify = new AMessage(kWhatRTSPNotify, id());
err = mNetSession->createRTSPServer(
mInterfaceAddr, port, notify, &mSessionID);
} else {
err = -EINVAL;
}
}
if (err == OK) {
mState = AWAITING_CLIENT_CONNECTION;
}
sp<AMessage> response = new AMessage;
response->setInt32("err", err);
response->postReply(replyID);
break;
}
case kWhatRTSPNotify:
{
int32_t reason;
CHECK(msg->findInt32("reason", &reason));
switch (reason) {
case ANetworkSession::kWhatError:
{
int32_t sessionID;
CHECK(msg->findInt32("sessionID", &sessionID));
int32_t err;
CHECK(msg->findInt32("err", &err));
AString detail;
CHECK(msg->findString("detail", &detail));
ALOGE("An error occurred in session %d (%d, '%s/%s').",
sessionID,
err,
detail.c_str(),
strerror(-err));
mNetSession->destroySession(sessionID);
if (sessionID == mClientSessionID) {
mClientSessionID = 0;
mClient->onDisplayError(
IRemoteDisplayClient::kDisplayErrorUnknown);
}
break;
}
case ANetworkSession::kWhatClientConnected:
{
int32_t sessionID;
CHECK(msg->findInt32("sessionID", &sessionID));
if (mClientSessionID > 0) {
ALOGW("A client tried to connect, but we already "
"have one.");
mNetSession->destroySession(sessionID);
break;
}
CHECK_EQ(mState, AWAITING_CLIENT_CONNECTION);
CHECK(msg->findString("client-ip", &mClientInfo.mRemoteIP));
CHECK(msg->findString("server-ip", &mClientInfo.mLocalIP));
if (mClientInfo.mRemoteIP == mClientInfo.mLocalIP) {
// Disallow connections from the local interface
// for security reasons.
mNetSession->destroySession(sessionID);
break;
}
CHECK(msg->findInt32(
"server-port", &mClientInfo.mLocalPort));
mClientInfo.mPlaybackSessionID = -1;
mClientSessionID = sessionID;
ALOGI("We now have a client (%d) connected.", sessionID);
mState = AWAITING_CLIENT_SETUP;
status_t err = sendM1(sessionID);
CHECK_EQ(err, (status_t)OK);
break;
}
case ANetworkSession::kWhatData:
{
status_t err = onReceiveClientData(msg);
if (err != OK) {
mClient->onDisplayError(
IRemoteDisplayClient::kDisplayErrorUnknown);
}
#if 0
// testing only.
char val[PROPERTY_VALUE_MAX];
if (property_get("media.wfd.trigger", val, NULL)) {
if (!strcasecmp(val, "pause") && mState == PLAYING) {
mState = PLAYING_TO_PAUSED;
sendTrigger(mClientSessionID, TRIGGER_PAUSE);
} else if (!strcasecmp(val, "play") && mState == PAUSED) {
mState = PAUSED_TO_PLAYING;
sendTrigger(mClientSessionID, TRIGGER_PLAY);
}
}
#endif
break;
}
default:
TRESPASS();
}
break;
}
case kWhatStop:
{
CHECK(msg->senderAwaitsResponse(&mStopReplyID));
CHECK_LT(mState, AWAITING_CLIENT_TEARDOWN);
if (mState >= AWAITING_CLIENT_PLAY) {
// We have a session, i.e. a previous SETUP succeeded.
status_t err = sendTrigger(
mClientSessionID, TRIGGER_TEARDOWN);
if (err == OK) {
mState = AWAITING_CLIENT_TEARDOWN;
(new AMessage(kWhatTeardownTriggerTimedOut, id()))->post(
kTeardownTriggerTimeouSecs * 1000000ll);
break;
}
// fall through.
}
finishStop();
break;
}
case kWhatPause:
{
uint32_t replyID;
CHECK(msg->senderAwaitsResponse(&replyID));
status_t err = OK;
if (mState != PLAYING) {
err = INVALID_OPERATION;
} else {
mState = PLAYING_TO_PAUSED;
sendTrigger(mClientSessionID, TRIGGER_PAUSE);
}
sp<AMessage> response = new AMessage;
response->setInt32("err", err);
response->postReply(replyID);
break;
}
case kWhatResume:
{
uint32_t replyID;
CHECK(msg->senderAwaitsResponse(&replyID));
status_t err = OK;
if (mState != PAUSED) {
err = INVALID_OPERATION;
} else {
mState = PAUSED_TO_PLAYING;
sendTrigger(mClientSessionID, TRIGGER_PLAY);
}
sp<AMessage> response = new AMessage;
response->setInt32("err", err);
response->postReply(replyID);
break;
}
case kWhatReapDeadClients:
{
mReaperPending = false;
if (mClientSessionID == 0
|| mClientInfo.mPlaybackSession == NULL) {
break;
}
if (mClientInfo.mPlaybackSession->getLastLifesignUs()
+ kPlaybackSessionTimeoutUs < ALooper::GetNowUs()) {
ALOGI("playback session timed out, reaping.");
mNetSession->destroySession(mClientSessionID);
mClientSessionID = 0;
mClient->onDisplayError(
IRemoteDisplayClient::kDisplayErrorUnknown);
} else {
scheduleReaper();
}
break;
}
case kWhatPlaybackSessionNotify:
{
int32_t playbackSessionID;
CHECK(msg->findInt32("playbackSessionID", &playbackSessionID));
int32_t what;
CHECK(msg->findInt32("what", &what));
if (what == PlaybackSession::kWhatSessionDead) {
ALOGI("playback session wants to quit.");
mClient->onDisplayError(
IRemoteDisplayClient::kDisplayErrorUnknown);
} else if (what == PlaybackSession::kWhatSessionEstablished) {
if (mClient != NULL) {
mClient->onDisplayConnected(
mClientInfo.mPlaybackSession->getSurfaceTexture(),
mClientInfo.mPlaybackSession->width(),
mClientInfo.mPlaybackSession->height(),
mUsingHDCP
? IRemoteDisplayClient::kDisplayFlagSecure
: 0);
}
if (0 != property_set("wfd.enable", "1")) {
ALOGE("DisplayConnected set wfd.enable property fail.");
}
ALOGI("DisplayConnected set wfd.enable property to 1.");
if (mState == ABOUT_TO_PLAY) {
mState = PLAYING;
}
} else if (what == PlaybackSession::kWhatSessionDestroyed) {
disconnectClient2();
} else {
CHECK_EQ(what, PlaybackSession::kWhatBinaryData);
int32_t channel;
CHECK(msg->findInt32("channel", &channel));
sp<ABuffer> data;
CHECK(msg->findBuffer("data", &data));
CHECK_LE(channel, 0xffu);
CHECK_LE(data->size(), 0xffffu);
int32_t sessionID;
CHECK(msg->findInt32("sessionID", &sessionID));
char header[4];
header[0] = '$';
header[1] = channel;
header[2] = data->size() >> 8;
header[3] = data->size() & 0xff;
mNetSession->sendRequest(
sessionID, header, sizeof(header));
mNetSession->sendRequest(
sessionID, data->data(), data->size());
}
break;
}
case kWhatKeepAlive:
{
int32_t sessionID;
CHECK(msg->findInt32("sessionID", &sessionID));
if (mClientSessionID != sessionID) {
// Obsolete event, client is already gone.
break;
}
sendM16(sessionID);
break;
}
case kWhatTeardownTriggerTimedOut:
{
if (mState == AWAITING_CLIENT_TEARDOWN) {
ALOGI("TEARDOWN trigger timed out, forcing disconnection.");
CHECK_NE(mStopReplyID, 0);
finishStop();
break;
}
break;
}
case kWhatHDCPNotify:
{
int32_t msgCode, ext1, ext2;
CHECK(msg->findInt32("msg", &msgCode));
CHECK(msg->findInt32("ext1", &ext1));
CHECK(msg->findInt32("ext2", &ext2));
ALOGI("Saw HDCP notification code %d, ext1 %d, ext2 %d",
msgCode, ext1, ext2);
switch (msgCode) {
case HDCPModule::HDCP_INITIALIZATION_COMPLETE:
{
mHDCPInitializationComplete = true;
if (mSetupTriggerDeferred) {
mSetupTriggerDeferred = false;
sendTrigger(mClientSessionID, TRIGGER_SETUP);
}
break;
}
case HDCPModule::HDCP_SHUTDOWN_COMPLETE:
case HDCPModule::HDCP_SHUTDOWN_FAILED:
{
// Ugly hack to make sure that the call to
// HDCPObserver::notify is completely handled before
// we clear the HDCP instance and unload the shared
// library :(
(new AMessage(kWhatFinishStop2, id()))->post(300000ll);
break;
}
default:
{
ALOGE("HDCP failure, shutting down.");
mClient->onDisplayError(
IRemoteDisplayClient::kDisplayErrorUnknown);
break;
}
}
break;
}
case kWhatFinishStop2:
{
finishStop2();
break;
}
default:
TRESPASS();
}
}
static unsigned int memsizealloc = 0;
static int alloc_device_alloc(alloc_device_t *dev, int w, int h, int format, int usage, buffer_handle_t *pHandle, int *pStride)
{
if (!pHandle || !pStride)
{
return -EINVAL;
}
size_t size;
size_t stride;
size_t bpr = 0;
int reserve = true;
int fmt_bak = format;
bool fmt_chg = false;
#ifdef USE_X86
if(format == HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED )
{
if(usage & GRALLOC_USAGE_HW_VIDEO_ENCODER )
{
//ALOGD("(usage & GRALLOC_USAGE_HW_VIDEO_ENCODER treat as NV12");
format = HAL_PIXEL_FORMAT_YCrCb_NV12;
}
else
{
//ALOGD("treat as NV12 888");
format = HAL_PIXEL_FORMAT_RGBX_8888;
fmt_chg = true;
}
}
#endif
if (format == HAL_PIXEL_FORMAT_YCrCb_420_SP
|| format == HAL_PIXEL_FORMAT_YV12
|| format == HAL_PIXEL_FORMAT_YCrCb_NV12
|| format == HAL_PIXEL_FORMAT_YCrCb_NV12_VIDEO
|| format == HAL_PIXEL_FORMAT_YCbCr_420_888)
{
int align = 8;
int bpp = 0;
char property[PROPERTY_VALUE_MAX];
int gpuformat = HAL_PIXEL_FORMAT_RGB_565;
switch (format)
{
case HAL_PIXEL_FORMAT_YCrCb_420_SP:
case HAL_PIXEL_FORMAT_YV12:
case HAL_PIXEL_FORMAT_YCbCr_420_888:
stride = GRALLOC_ALIGN(w, 16);
size = h * (stride + GRALLOC_ALIGN(stride / 2, 16));
break;
case HAL_PIXEL_FORMAT_YCrCb_NV12:
//stride = GRALLOC_ALIGN(w, 16);
//size = h * (stride + GRALLOC_ALIGN(stride/2,16));
bpp = 2;
bpr = (w*bpp + (align-1)) & ~(align-1);
size = bpr * h;
stride = bpr / bpp;
break;
case HAL_PIXEL_FORMAT_YCrCb_NV12_VIDEO:
property_set("sys.gmali.performance","video");
bpp = 2;
if (property_get("sys.yuv.rgb.format", property, NULL) > 0) {
gpuformat = atoi(property);
}
if(gpuformat == HAL_PIXEL_FORMAT_RGBA_8888 || gpuformat == HAL_PIXEL_FORMAT_RGBX_8888)
bpp = 4;
else if(gpuformat == HAL_PIXEL_FORMAT_RGB_565)
bpp = 2;
bpr = (w*bpp + (align-1)) & ~(align-1);
#if GET_VPU_INTO_FROM_HEAD
size = bpr * h;
#else
//zxl:add tVPU_FRAME at the end of allocated buffer
size = bpr * h + sizeof(tVPU_FRAME);
#endif
stride = bpr / bpp;
break;
default:
return -EINVAL;
}
}
else
{
int align = 8;
int bpp = 0;
switch (format)
{
case HAL_PIXEL_FORMAT_RGBA_8888:
case HAL_PIXEL_FORMAT_RGBX_8888:
case HAL_PIXEL_FORMAT_BGRA_8888:
case HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED:
bpp = 4;
break;
case HAL_PIXEL_FORMAT_RGB_888:
bpp = 3;
break;
case HAL_PIXEL_FORMAT_RGB_565:
case HAL_PIXEL_FORMAT_YCbCr_422_I:
case HAL_PIXEL_FORMAT_YCbCr_422_SP:
case HAL_PIXEL_FORMAT_RAW_SENSOR:
#if PLATFORM_SDK_VERSION < 18
case HAL_PIXEL_FORMAT_RGBA_5551:
case HAL_PIXEL_FORMAT_RGBA_4444:
#endif
bpp = 2;
break;
case HAL_PIXEL_FORMAT_BLOB:
bpp = 1;
break;
default:
return -EINVAL;
}
int w_e = w, h_e = h;
#ifdef USE_LCDC_COMPOSER
if (!(usage & GRALLOC_USAGE_HW_FB)) {
#ifndef LCDC_COMPOSER_LANDSCAPE_ONLY
private_module_t* m = reinterpret_cast<private_module_t*>(dev->common.module);
uint32_t rot = (usage & GRALLOC_USAGE_ROT_MASK) >> 24;
int bar = 0;
if(rot & 0x08) {
rot &= ~0x08;
switch(rot) {
case 0:
case HAL_TRANSFORM_ROT_180:
bar = m->info.yres - h;
//ALOGD("bar=%d",bar);
if((w == m->info.xres) && (bar > 0) && (bar < 100)) {
if(0 == rot)
h_e += bar;
else
reserve = true;
}
//ALOGI("rot=%d [0/180]bar=%d,w=%d,h=%d,w_e=%d,h_e=%d",rot,bar,w,h,w_e,h_e);
break;
case HAL_TRANSFORM_ROT_90:
case HAL_TRANSFORM_ROT_270:
bar = m->info.xres - w;
if((h == m->info.yres) && (bar > 0) && (bar < 100)) {
w_e += bar;
}
if (rot == HAL_TRANSFORM_ROT_270)
{
reserve = true;
}
// ALOGI("rot=%d [90/270]bar=%d,w=%d,h=%d,w_e=%d,h_e=%d",rot,bar,w,h,w_e,h_e);
break;
default:
break;
}
}
else
{
int bar_h;
int bar_w;
bar_h = m->info.yres - h;
bar_w = m->info.xres - w;
//ALOGD("bar=%d",bar);
if((w == m->info.xres) && (bar_h > 0) && (bar_h < 100))
{
h_e += bar_h;
}
else if((h == m->info.yres) && (bar_w > 0) && (bar_w < 100))
{
w_e += bar_w;
}
reserve = true;
// ALOGI("[other rot=%x]bar_w=%d,bar_h=%d,w=%d,h=%d,w_e=%d,h_e=%d",rot,bar_w,bar_h,w,h,w_e,h_e);
}
//ALOGD("rot[%d]: %d x %d => %d x %d, reserve=%d", rot, w, h, w_e, h_e, (int)reserve);
#else
h_e += 100;
#endif
}
if(w_e % 16) {
//ALOGD("alloc_device_alloc, w[%d] not align, aligned to %d", w_e, (w + 31) & (~31));
w_e = (w + 15) & (~15);
}
#endif
if (!(usage & GRALLOC_USAGE_HW_FB))
{
//zxl:fix failed of cts DecodeEditEncodeTest
if(usage == 0x10702)
{
if(w_e % 32) {
w_e=GRALLOC_ALIGN(w_e,32);
}
}
else
{
if(w_e % 16) {
w_e=GRALLOC_ALIGN(w_e,16);
}
}
}
else
{
if(w_e % 32)
{
w_e=GRALLOC_ALIGN(w_e,32);
}
}
// bpr = (w_e*bpp + (align-1)) & ~(align-1);
bpr = GRALLOC_ALIGN(w_e * bpp, 64);
size = bpr * h_e;
stride = bpr / bpp;
if (format == HAL_PIXEL_FORMAT_BLOB) {
bpp = 1;
size = w*h;
stride = w;
if (GRALLOC_USAGE_HW_CAMERA_WRITE & usage) {
/* take count from private usage flags */
int count = (usage & GRALLOC_USAGE_PRIVATE_MASK ) >> 28;
size += count * GRALLOC_EXTRA_ALLOCATION_UNIT_SIZE;
int wifi_unload_driver()
{
property_set(DRIVER_PROP_NAME, "unloaded");
return 0;
}
int wifi_start_supplicant(int p2p_supported)
{
char supp_status[PROPERTY_VALUE_MAX] = {'\0'};
int count = 200; /* wait at most 20 seconds for completion */
#ifdef HAVE_LIBC_SYSTEM_PROPERTIES
const prop_info *pi;
unsigned serial = 0, i;
#endif
if (p2p_supported) {
strcpy(supplicant_name, P2P_SUPPLICANT_NAME);
strcpy(supplicant_prop_name, P2P_PROP_NAME);
/* Ensure p2p config file is created */
if (ensure_config_file_exists(P2P_CONFIG_FILE) < 0) {
ALOGE("Failed to create a p2p config file");
return -1;
}
} else {
strcpy(supplicant_name, SUPPLICANT_NAME);
strcpy(supplicant_prop_name, SUPP_PROP_NAME);
}
/* Check whether already running */
if (property_get(supplicant_prop_name, supp_status, NULL)
&& strcmp(supp_status, "running") == 0) {
return 0;
}
/* Before starting the daemon, make sure its config file exists */
if (ensure_config_file_exists(SUPP_CONFIG_FILE) < 0) {
ALOGE("Wi-Fi will not be enabled");
return -1;
}
if (ensure_entropy_file_exists() < 0) {
ALOGE("Wi-Fi entropy file was not created");
}
/* Clear out any stale socket files that might be left over. */
wpa_ctrl_cleanup();
/* Reset sockets used for exiting from hung state */
exit_sockets[0] = exit_sockets[1] = -1;
#ifdef HAVE_LIBC_SYSTEM_PROPERTIES
/*
* Get a reference to the status property, so we can distinguish
* the case where it goes stopped => running => stopped (i.e.,
* it start up, but fails right away) from the case in which
* it starts in the stopped state and never manages to start
* running at all.
*/
pi = __system_property_find(supplicant_prop_name);
if (pi != NULL) {
serial = __system_property_serial(pi);
}
#endif
property_get("wifi.interface", primary_iface, WIFI_TEST_INTERFACE);
property_set("ctl.start", supplicant_name);
sched_yield();
while (count-- > 0) {
#ifdef HAVE_LIBC_SYSTEM_PROPERTIES
if (pi == NULL) {
pi = __system_property_find(supplicant_prop_name);
}
if (pi != NULL) {
__system_property_read(pi, NULL, supp_status);
if (strcmp(supp_status, "running") == 0) {
return 0;
} else if (__system_property_serial(pi) != serial &&
strcmp(supp_status, "stopped") == 0) {
return -1;
}
}
#else
if (property_get(supplicant_prop_name, supp_status, NULL)) {
if (strcmp(supp_status, "running") == 0)
return 0;
}
#endif
usleep(100000);
}
return -1;
}
int wifi_load_driver()
{
property_set(DRIVER_PROP_NAME, "ok");
return 0;
}
int main(int argc, char *argv[]) {
base::CommandLine::Init(argc, argv);
base::CommandLine* cl = base::CommandLine::ForCurrentProcess();
int32_t port = kDefaultPort;
if (cl->HasSwitch(kPort)) {
std::string value = cl->GetSwitchValueASCII(kPort);
base::StringToInt(value, &port);
}
// Puch a TCP hole to accept connection
FwDaemon daemon(std::unique_ptr<FirewallInterface>{new FirewalldFirewall()}, (uint16_t)port);
daemon.Run();
std::unique_ptr<Socket> server = Socket::NewServer(Socket::Protocol::kTcp, port);
if (server == nullptr) {
ALOGE("Failed to create fastbootd service.");
return 1;
}
int fastbootd_reboot = 0;
if (property_get_bool("persist.sys.fastbootd.reboot", 1)) {
pthread_t hreboot;
pthread_create(&hreboot, NULL, thread_reboot, &fastbootd_reboot);
fastbootd_reboot = 1;
}
// Check if in demo mode
if (fastbootd_reboot == 1) {
struct stat st;
int result = stat("/boot/DEMO", &st);
if (result == 0 && S_ISREG(st.st_mode)) {
fastbootd_reboot = 0;
}
}
std::string handshake_message(android::base::StringPrintf("FB%02d", kProtocolVersion));
while (true) {
std::unique_ptr<Socket> client = server->Accept();
if (client == nullptr) {
ALOGE("Failed to accept client connection.");
continue;
}
char buffer[4];
ssize_t bytes = client->Receive(buffer, sizeof(buffer), 500);
if (bytes != 4) {
ALOGE("Failed to get client version.");
continue;
}
if (memcmp(buffer, "FB01", 4) != 0) {
ALOGE("Unsupported client: %c%c%c%c", buffer[0], buffer[1], buffer[2], buffer[3]);
continue;
}
if (fastbootd_reboot) {
fastbootd_reboot = 0;
property_set("persist.sys.fastbootd.reboot", "0");
}
if (!client->Send(handshake_message.c_str(), kHandshakeLength)) {
ALOGE("Failed to send handshake.");
continue;
}
command_loop(client.get());
}
return 0;
}
void restart_usb_service(int fd, void *cookie) {
property_set("service.adb.tcp.port", "0");
WriteFdExactly(fd, "restarting in USB mode\n");
adb_close(fd);
}
int wifi_start_supplicant_common(const char *config_file)
{
char daemon_cmd[PROPERTY_VALUE_MAX];
char supp_status[PROPERTY_VALUE_MAX] = {'\0'};
int count = 200; /* wait at most 20 seconds for completion */
#ifdef HAVE_LIBC_SYSTEM_PROPERTIES
const prop_info *pi;
unsigned serial = 0;
#endif
/* Check whether already running */
if (property_get(SUPP_PROP_NAME, supp_status, NULL)
&& strcmp(supp_status, "running") == 0) {
return 0;
}
/* Before starting the daemon, make sure its config file exists */
if (ensure_config_file_exists(config_file) < 0) {
LOGE("Wi-Fi will not be enabled");
return -1;
}
if (ensure_entropy_file_exists() < 0) {
LOGE("Wi-Fi entropy file was not created");
}
/* Clear out any stale socket files that might be left over. */
wifi_wpa_ctrl_cleanup();
#ifdef HAVE_LIBC_SYSTEM_PROPERTIES
/*
* Get a reference to the status property, so we can distinguish
* the case where it goes stopped => running => stopped (i.e.,
* it start up, but fails right away) from the case in which
* it starts in the stopped state and never manages to start
* running at all.
*/
pi = __system_property_find(SUPP_PROP_NAME);
if (pi != NULL) {
serial = pi->serial;
}
#endif
property_get("wifi.interface", iface, WIFI_TEST_INTERFACE);
snprintf(daemon_cmd, PROPERTY_VALUE_MAX, "%s:-i%s -c%s", SUPPLICANT_NAME, iface, config_file);
property_set("ctl.start", daemon_cmd);
sched_yield();
while (count-- > 0) {
#ifdef HAVE_LIBC_SYSTEM_PROPERTIES
if (pi == NULL) {
pi = __system_property_find(SUPP_PROP_NAME);
}
if (pi != NULL) {
__system_property_read(pi, NULL, supp_status);
if (strcmp(supp_status, "running") == 0) {
return 0;
} else if (pi->serial != serial &&
strcmp(supp_status, "stopped") == 0) {
return -1;
}
}
#else
if (property_get(SUPP_PROP_NAME, supp_status, NULL)) {
if (strcmp(supp_status, "running") == 0)
return 0;
}
#endif
usleep(100000);
}
return -1;
}
void handle_property_set_fd()
{
prop_msg msg;
int s;
int r;
int res;
struct ucred cr;
struct sockaddr_un addr;
socklen_t addr_size = sizeof(addr);
socklen_t cr_size = sizeof(cr);
char * source_ctx = NULL;
if ((s = accept(property_set_fd, (struct sockaddr *) &addr, &addr_size)) < 0) {
return;
}
/* Check socket options here */
if (getsockopt(s, SOL_SOCKET, SO_PEERCRED, &cr, &cr_size) < 0) {
close(s);
ERROR("Unable to receive socket options\n");
return;
}
r = TEMP_FAILURE_RETRY(recv(s, &msg, sizeof(msg), 0));
if(r != sizeof(prop_msg)) {
ERROR("sys_prop: mis-match msg size received: %d expected: %d errno: %d\n",
r, sizeof(prop_msg), errno);
close(s);
return;
}
switch(msg.cmd) {
case PROP_MSG_SETPROP:
msg.name[PROP_NAME_MAX-1] = 0;
msg.value[PROP_VALUE_MAX-1] = 0;
if (!is_legal_property_name(msg.name, strlen(msg.name))) {
ERROR("sys_prop: illegal property name. Got: \"%s\"\n", msg.name);
close(s);
return;
}
getpeercon(s, &source_ctx);
if(memcmp(msg.name,"ctl.",4) == 0) {
// Keep the old close-socket-early behavior when handling
// ctl.* properties.
close(s);
if (check_control_perms(msg.value, cr.uid, cr.gid, source_ctx)) {
handle_control_message((char*) msg.name + 4, (char*) msg.value);
} else {
ERROR("sys_prop: Unable to %s service ctl [%s] uid:%d gid:%d pid:%d\n",
msg.name + 4, msg.value, cr.uid, cr.gid, cr.pid);
}
} else {
if (check_perms(msg.name, cr.uid, cr.gid, source_ctx)) {
property_set((char*) msg.name, (char*) msg.value);
} else {
ERROR("sys_prop: permission denied uid:%d name:%s\n",
cr.uid, msg.name);
}
// Note: bionic's property client code assumes that the
// property server will not close the socket until *AFTER*
// the property is written to memory.
close(s);
}
freecon(source_ctx);
break;
default:
close(s);
break;
}
}
int main(int argc, char **argv) {
// Recovery needs to install world-readable files, so clear umask
// set by init
umask(0);
Log_Offset = 0;
// Set up temporary log file (/tmp/recovery.log)
freopen(TMP_LOG_FILE, "a", stdout);
setbuf(stdout, NULL);
freopen(TMP_LOG_FILE, "a", stderr);
setbuf(stderr, NULL);
signal(SIGPIPE, SIG_IGN);
// Handle ADB sideload
if (argc == 3 && strcmp(argv[1], "--adbd") == 0) {
property_set("ctl.stop", "adbd");
adb_main(argv[2]);
return 0;
}
#ifdef RECOVERY_SDCARD_ON_DATA
datamedia = true;
#endif
char crash_prop_val[PROPERTY_VALUE_MAX];
int crash_counter;
property_get("twrp.crash_counter", crash_prop_val, "-1");
crash_counter = atoi(crash_prop_val) + 1;
snprintf(crash_prop_val, sizeof(crash_prop_val), "%d", crash_counter);
property_set("twrp.crash_counter", crash_prop_val);
property_set("ro.twrp.boot", "1");
property_set("ro.twrp.version", TW_VERSION_STR);
time_t StartupTime = time(NULL);
printf("Starting TWRP %s on %s (pid %d)\n", TW_VERSION_STR, ctime(&StartupTime), getpid());
#ifdef HAVE_SELINUX
printf("Setting SELinux to permissive\n");
TWFunc::write_file("/sys/fs/selinux/enforce", "0");
TWFunc::write_file("/file_contexts",
"\n\n# MultiROM folders\n"
"/data/media/multirom(/.*)? <<none>>\n"
"/data/media/0/multirom(/.*)? <<none>>\n"
"/realdata/media/multirom(/.*)? <<none>>\n"
"/realdata/media/0/multirom(/.*)? <<none>>\n"
"/sdcard/multirom(/.*)? <<none>>\n"
"/mnt/mrom(/.*)? <<none>>\n",
"ae");
#endif
// MultiROM _might_ have crashed the recovery while the boot device was redirected.
// It would be bad to let that as is.
MultiROM::failsafeCheckPartition("/tmp/mrom_fakebootpart");
MultiROM::failsafeCheckPartition("/tmp/mrom_fakesyspart");
// Load default values to set DataManager constants and handle ifdefs
DataManager::SetDefaultValues();
printf("Starting the UI...");
gui_init();
printf("=> Linking mtab\n");
symlink("/proc/mounts", "/etc/mtab");
if (TWFunc::Path_Exists("/etc/twrp.fstab")) {
if (TWFunc::Path_Exists("/etc/recovery.fstab")) {
printf("Renaming regular /etc/recovery.fstab -> /etc/recovery.fstab.bak\n");
rename("/etc/recovery.fstab", "/etc/recovery.fstab.bak");
}
printf("Moving /etc/twrp.fstab -> /etc/recovery.fstab\n");
rename("/etc/twrp.fstab", "/etc/recovery.fstab");
}
printf("=> Processing recovery.fstab\n");
if (!PartitionManager.Process_Fstab("/etc/recovery.fstab", 1)) {
LOGERR("Failing out of recovery due to problem with recovery.fstab.\n");
return -1;
}
PartitionManager.Output_Partition_Logging();
DataManager::SetValue(TW_MROM_REC_VERSION_VAR, MultiROM::getRecoveryVersion());
printf("MultiROM Recovery version: %s\n", DataManager::GetStrValue(TW_MROM_REC_VERSION_VAR).c_str());
// Load up all the resources
gui_loadResources();
#ifdef HAVE_SELINUX
if (TWFunc::Path_Exists("/prebuilt_file_contexts")) {
if (TWFunc::Path_Exists("/file_contexts")) {
printf("Renaming regular /file_contexts -> /file_contexts.bak\n");
rename("/file_contexts", "/file_contexts.bak");
}
printf("Moving /prebuilt_file_contexts -> /file_contexts\n");
rename("/prebuilt_file_contexts", "/file_contexts");
}
struct selinux_opt selinux_options[] = {
{ SELABEL_OPT_PATH, "/file_contexts" }
};
selinux_handle = selabel_open(SELABEL_CTX_FILE, selinux_options, 1);
if (!selinux_handle)
printf("No file contexts for SELinux\n");
else
printf("SELinux contexts loaded from /file_contexts\n");
{ // Check to ensure SELinux can be supported by the kernel
char *contexts = NULL;
if (PartitionManager.Mount_By_Path("/cache", true) && TWFunc::Path_Exists("/cache/recovery")) {
lgetfilecon("/cache/recovery", &contexts);
if (!contexts) {
lsetfilecon("/cache/recovery", "test");
lgetfilecon("/cache/recovery", &contexts);
}
} else {
LOGINFO("Could not check /cache/recovery SELinux contexts, using /sbin/teamwin instead which may be inaccurate.\n");
lgetfilecon("/sbin/teamwin", &contexts);
}
if (!contexts) {
gui_print_color("warning", "Kernel does not have support for reading SELinux contexts.\n");
} else {
free(contexts);
gui_print("Full SELinux support is present.\n");
}
}
#else
gui_print_color("warning", "No SELinux support (no libselinux).\n");
#endif
PartitionManager.Mount_By_Path("/cache", true);
string Zip_File, Reboot_Value;
bool Cache_Wipe = false, Factory_Reset = false, Perform_Backup = false, Shutdown = false;
{
TWPartition* misc = PartitionManager.Find_Partition_By_Path("/misc");
if (misc != NULL) {
if (misc->Current_File_System == "emmc") {
set_device_type('e');
set_device_name(misc->Actual_Block_Device.c_str());
} else if (misc->Current_File_System == "mtd") {
set_device_type('m');
set_device_name(misc->MTD_Name.c_str());
} else {
LOGERR("Unknown file system for /misc\n");
}
}
get_args(&argc, &argv);
int index, index2, len;
char* argptr;
char* ptr;
printf("Startup Commands: ");
for (index = 1; index < argc; index++) {
argptr = argv[index];
printf(" '%s'", argv[index]);
len = strlen(argv[index]);
if (*argptr == '-') {argptr++; len--;}
if (*argptr == '-') {argptr++; len--;}
if (*argptr == 'u') {
ptr = argptr;
index2 = 0;
while (*ptr != '=' && *ptr != '\n')
ptr++;
// skip the = before grabbing Zip_File
while (*ptr == '=')
ptr++;
if (*ptr) {
Zip_File = ptr;
} else
LOGERR("argument error specifying zip file\n");
} else if (*argptr == 'w') {
if (len == 9)
Factory_Reset = true;
else if (len == 10)
Cache_Wipe = true;
} else if (*argptr == 'n') {
Perform_Backup = true;
} else if (*argptr == 'p') {
Shutdown = true;
} else if (*argptr == 's') {
ptr = argptr;
index2 = 0;
while (*ptr != '=' && *ptr != '\n')
ptr++;
if (*ptr) {
Reboot_Value = *ptr;
}
}
}
printf("\n");
}
if(crash_counter == 0) {
property_list(Print_Prop, NULL);
printf("\n");
} else {
printf("twrp.crash_counter=%d\n", crash_counter);
}
// Check for and run startup script if script exists
TWFunc::check_and_run_script("/sbin/runatboot.sh", "boot");
TWFunc::check_and_run_script("/sbin/postrecoveryboot.sh", "boot");
#ifdef TW_INCLUDE_INJECTTWRP
// Back up TWRP Ramdisk if needed:
TWPartition* Boot = PartitionManager.Find_Partition_By_Path("/boot");
LOGINFO("Backing up TWRP ramdisk...\n");
if (Boot == NULL || Boot->Current_File_System != "emmc")
TWFunc::Exec_Cmd("injecttwrp --backup /tmp/backup_recovery_ramdisk.img");
else {
string injectcmd = "injecttwrp --backup /tmp/backup_recovery_ramdisk.img bd=" + Boot->Actual_Block_Device;
TWFunc::Exec_Cmd(injectcmd);
}
LOGINFO("Backup of TWRP ramdisk done.\n");
#endif
bool Keep_Going = true;
if (Perform_Backup) {
DataManager::SetValue(TW_BACKUP_NAME, "(Auto Generate)");
if (!OpenRecoveryScript::Insert_ORS_Command("backup BSDCAE\n"))
Keep_Going = false;
}
if (Keep_Going && !Zip_File.empty()) {
string ORSCommand = "install " + Zip_File;
if (!OpenRecoveryScript::Insert_ORS_Command(ORSCommand))
Keep_Going = false;
}
if (Keep_Going) {
if (Factory_Reset) {
if (!OpenRecoveryScript::Insert_ORS_Command("wipe data\n"))
Keep_Going = false;
} else if (Cache_Wipe) {
if (!OpenRecoveryScript::Insert_ORS_Command("wipe cache\n"))
Keep_Going = false;
}
}
TWFunc::Update_Log_File();
// Offer to decrypt if the device is encrypted
if (DataManager::GetIntValue(TW_IS_ENCRYPTED) != 0) {
LOGINFO("Is encrypted, do decrypt page first\n");
if (gui_startPage("decrypt", 1, 1) != 0) {
LOGERR("Failed to start decrypt GUI page.\n");
} else {
// Check for and load custom theme if present
gui_loadCustomResources();
}
} else if (datamedia) {
if (tw_get_default_metadata(DataManager::GetSettingsStoragePath().c_str()) != 0) {
LOGINFO("Failed to get default contexts and file mode for storage files.\n");
} else {
LOGINFO("Got default contexts and file mode for storage files.\n");
}
}
// Read the settings file
#ifdef TW_HAS_MTP
// We unmount partitions sometimes during early boot which may override
// the default of MTP being enabled by auto toggling MTP off. This
// will force it back to enabled then get overridden by the settings
// file, assuming that an entry for tw_mtp_enabled is set.
DataManager::SetValue("tw_mtp_enabled", 1);
#endif
DataManager::ReadSettingsFile();
gui_rotate(DataManager::GetIntValue(TW_ROTATION));
// Fixup the RTC clock on devices which require it
if(crash_counter == 0)
TWFunc::Fixup_Time_On_Boot();
// Run any outstanding OpenRecoveryScript
if(DataManager::GetIntValue(TW_IS_ENCRYPTED) == 0)
{
if ((TWFunc::Path_Exists(SCRIPT_FILE_TMP) || TWFunc::Path_Exists(SCRIPT_FILE_CACHE)))
OpenRecoveryScript::Run_OpenRecoveryScript();
else
MultiROM::executeCacheScripts();
}
#if 0
#ifdef TW_HAS_MTP
// Enable MTP?
char mtp_crash_check[PROPERTY_VALUE_MAX];
property_get("mtp.crash_check", mtp_crash_check, "0");
if (strcmp(mtp_crash_check, "0") == 0) {
property_set("mtp.crash_check", "1");
if (DataManager::GetIntValue("tw_mtp_enabled") == 1 && ((DataManager::GetIntValue(TW_IS_ENCRYPTED) != 0 && DataManager::GetIntValue(TW_IS_DECRYPTED) != 0) || DataManager::GetIntValue(TW_IS_ENCRYPTED) == 0)) {
LOGINFO("Enabling MTP during startup\n");
if (!PartitionManager.Enable_MTP())
PartitionManager.Disable_MTP();
else
gui_print("MTP Enabled\n");
} else {
PartitionManager.Disable_MTP();
}
property_set("mtp.crash_check", "0");
} else {
gui_print_color("warning", "MTP Crashed, not starting MTP on boot.\n");
DataManager::SetValue("tw_mtp_enabled", 0);
PartitionManager.Disable_MTP();
}
#else
PartitionManager.Disable_MTP();
#endif
#endif
// Launch the main GUI
gui_start();
// Disable flashing of stock recovery
TWFunc::Disable_Stock_Recovery_Replace();
// Check for su to see if the device is rooted or not
if (PartitionManager.Mount_By_Path("/system", false)) {
if (TWFunc::Path_Exists("/supersu/su") && !TWFunc::Path_Exists("/system/bin/su") && !TWFunc::Path_Exists("/system/xbin/su") && !TWFunc::Path_Exists("/system/bin/.ext/.su")) {
// Device doesn't have su installed
DataManager::SetValue("tw_busy", 1);
if (gui_startPage("installsu", 1, 1) != 0) {
LOGERR("Failed to start SuperSU install page.\n");
}
}
sync();
PartitionManager.UnMount_By_Path("/system", false);
}
// Reboot
TWFunc::Update_Intent_File(Reboot_Value);
TWFunc::Update_Log_File();
gui_print("Rebooting...\n");
string Reboot_Arg;
DataManager::GetValue("tw_reboot_arg", Reboot_Arg);
if (Reboot_Arg == "recovery")
TWFunc::tw_reboot(rb_recovery);
else if (Reboot_Arg == "poweroff")
TWFunc::tw_reboot(rb_poweroff);
else if (Reboot_Arg == "bootloader")
TWFunc::tw_reboot(rb_bootloader);
else if (Reboot_Arg == "download")
TWFunc::tw_reboot(rb_download);
else
TWFunc::tw_reboot(rb_system);
return 0;
}
// This program will trigger the dumpstate service to start a call to
// dumpstate, then connect to the dumpstate local client to read the
// output. All of the dumpstate output is written to stdout, including
// any errors encountered while reading/writing the output.
int main() {
// Start the dumpstate service.
property_set("ctl.start", "dumpstate");
// Socket will not be available until service starts.
int s;
for (int i = 0; i < 20; i++) {
s = socket_local_client("dumpstate", ANDROID_SOCKET_NAMESPACE_RESERVED,
SOCK_STREAM);
if (s >= 0)
break;
// Try again in 1 second.
sleep(1);
}
if (s == -1) {
printf("Failed to connect to dumpstate service: %s\n", strerror(errno));
return 1;
}
// Set a timeout so that if nothing is read in 3 minutes, we'll stop
// reading and quit. No timeout in dumpstate is longer than 60 seconds,
// so this gives lots of leeway in case of unforeseen time outs.
struct timeval tv;
tv.tv_sec = 3 * 60;
tv.tv_usec = 0;
if (setsockopt(s, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv)) == -1) {
printf("WARNING: Cannot set socket timeout: %s\n", strerror(errno));
}
while (1) {
char buffer[65536];
ssize_t bytes_read = TEMP_FAILURE_RETRY(read(s, buffer, sizeof(buffer)));
if (bytes_read == 0) {
break;
} else if (bytes_read == -1) {
// EAGAIN really means time out, so change the errno.
if (errno == EAGAIN) {
errno = ETIMEDOUT;
}
printf("\nBugreport read terminated abnormally (%s).\n", strerror(errno));
break;
}
ssize_t bytes_to_send = bytes_read;
ssize_t bytes_written;
do {
bytes_written = TEMP_FAILURE_RETRY(write(STDOUT_FILENO,
buffer + bytes_read - bytes_to_send,
bytes_to_send));
if (bytes_written == -1) {
printf("Failed to write data to stdout: read %zd, trying to send %zd (%s)\n",
bytes_read, bytes_to_send, strerror(errno));
return 1;
}
bytes_to_send -= bytes_written;
} while (bytes_written != 0 && bytes_to_send > 0);
}
TEMP_FAILURE_RETRY(close(s));
return 0;
}
void setRadioState(RIL_RadioState newState)
#endif /* MTK_RIL */
{
RIL_RadioState oldState;
RIL_RadioState *pState = NULL;
pthread_mutex_lock(&s_state_mutex);
oldState = sState;
pState = &sState;
#ifdef MTK_GEMINI
if (MTK_RIL_SOCKET_2 == rid) {
oldState = sState2;
pState = &sState2;
}
#endif /* MTK_GEMINI */
if (s_closed > 0) {
// If we're closed, the only reasonable state is
// RADIO_STATE_UNAVAILABLE
// This is here because things on the main thread
// may attempt to change the radio state after the closed
// event happened in another thread
assert(0);
newState = RADIO_STATE_UNAVAILABLE;
}
if (*pState != newState || s_closed > 0) {
*pState = newState;
assert(0);
pthread_cond_broadcast (&s_state_cond);
}
pthread_mutex_unlock(&s_state_mutex);
/* do these outside of the mutex */
if (*pState != oldState) {
RIL_onUnsolicitedResponse (RIL_UNSOL_RESPONSE_RADIO_STATE_CHANGED,
NULL, 0, rid);
/* FIXME onSimReady() and onRadioPowerOn() cannot be called
* from the AT reader thread
* Currently, this doesn't happen, but if that changes then these
* will need to be dispatched on the request thread
*/
if (*pState == RADIO_STATE_SIM_READY) {
onSIMReady(rid);
} else if (*pState == RADIO_STATE_SIM_NOT_READY) {
onRadioPowerOn(rid);
}
/* the following property is used for auto test*/
if (*pState == RADIO_STATE_SIM_READY)
{
property_set((const char *)PROPERTY_RIL_SIM_READY, (const char *)"true");
}
else
{
property_set((const char *)PROPERTY_RIL_SIM_READY, (const char *)"false");
}
}
}
/* Runs on the radio thread */
static void
initMsmFMRadio(hal::FMRadioSettings &aInfo)
{
mozilla::ScopedClose fd(sRadioFD);
char version[64];
int rc;
snprintf(version, sizeof(version), "%d", sMsmFMVersion);
property_set("hw.fm.version", version);
/* Set the mode for soc downloader */
property_set("hw.fm.mode", "normal");
/* start fm_dl service */
property_set("ctl.start", "fm_dl");
/*
* Fix bug 800263. Wait until the FM radio chips initialization is done
* then set other properties, or the system will hang and reboot. This
* work around is from codeaurora
* (git://codeaurora.org/platform/frameworks/base.git).
*/
for (int i = 0; i < 4; ++i) {
sleep(1);
char value[PROPERTY_VALUE_MAX];
property_get("hw.fm.init", value, "0");
if (!strcmp(value, "1")) {
break;
}
}
rc = setControl(V4L2_CID_PRIVATE_TAVARUA_STATE, FM_RECV);
if (rc < 0) {
HAL_LOG("Unable to turn on radio |%s|", strerror(errno));
return;
}
int preEmphasis = aInfo.preEmphasis() <= 50;
rc = setControl(V4L2_CID_PRIVATE_TAVARUA_EMPHASIS, preEmphasis);
if (rc) {
HAL_LOG("Unable to configure preemphasis");
return;
}
rc = setControl(V4L2_CID_PRIVATE_TAVARUA_RDS_STD, 0);
if (rc) {
HAL_LOG("Unable to configure RDS");
return;
}
int spacing;
switch (aInfo.spaceType()) {
case 50:
spacing = FM_CH_SPACE_50KHZ;
break;
case 100:
spacing = FM_CH_SPACE_100KHZ;
break;
case 200:
spacing = FM_CH_SPACE_200KHZ;
break;
default:
HAL_LOG("Unsupported space value - %d", aInfo.spaceType());
return;
}
rc = setControl(V4L2_CID_PRIVATE_TAVARUA_SPACING, spacing);
if (rc) {
HAL_LOG("Unable to configure spacing");
return;
}
/*
* Frequency conversions
*
* HAL uses units of 1k for frequencies
* V4L2 uses units of 62.5kHz
* Multiplying by (10000 / 625) converts from HAL units to V4L2.
*/
struct v4l2_tuner tuner = {0};
tuner.rangelow = (aInfo.lowerLimit() * 10000) / 625;
tuner.rangehigh = (aInfo.upperLimit() * 10000) / 625;
tuner.audmode = V4L2_TUNER_MODE_STEREO;
rc = ioctl(fd, VIDIOC_S_TUNER, &tuner);
if (rc < 0) {
HAL_LOG("Unable to adjust band limits");
return;
}
rc = setControl(V4L2_CID_PRIVATE_TAVARUA_REGION, TAVARUA_REGION_OTHER);
if (rc < 0) {
HAL_LOG("Unable to configure region");
return;
}
// Some devices do not support analog audio routing. This should be
// indicated by the 'ro.moz.fm.noAnalog' property at build time.
char propval[PROPERTY_VALUE_MAX];
property_get("ro.moz.fm.noAnalog", propval, "");
bool noAnalog = !strcmp(propval, "true");
rc = setControl(V4L2_CID_PRIVATE_TAVARUA_SET_AUDIO_PATH,
noAnalog ? FM_DIGITAL_PATH : FM_ANALOG_PATH);
if (rc < 0) {
HAL_LOG("Unable to set audio path");
return;
}
if (!noAnalog) {
/* Set the mode for soc downloader */
property_set("hw.fm.mode", "config_dac");
/* Use analog mode FM */
property_set("hw.fm.isAnalog", "true");
/* start fm_dl service */
property_set("ctl.start", "fm_dl");
for (int i = 0; i < 4; ++i) {
sleep(1);
char value[PROPERTY_VALUE_MAX];
property_get("hw.fm.init", value, "0");
if (!strcmp(value, "1")) {
break;
}
}
}
fd.forget();
sRadioEnabled = true;
}
void HDMIDisplay::readCEUnderscanInfo()
{
int hdmiScanInfoFile = -1;
ssize_t len = -1;
char scanInfo[17];
char *ce_info_str = NULL;
char *save_ptr;
const char token[] = ", \n";
int ce_info = -1;
memset(scanInfo, 0, sizeof(scanInfo));
hdmiScanInfoFile = openDeviceNode("scan_info", O_RDONLY);
if (hdmiScanInfoFile < 0) {
return;
} else {
len = read(hdmiScanInfoFile, scanInfo, sizeof(scanInfo)-1);
ALOGD("%s: Scan Info string: %s length = %zu",
__FUNCTION__, scanInfo, len);
if (len <= 0) {
close(hdmiScanInfoFile);
ALOGE("%s: Scan Info file empty", __FUNCTION__);
return;
}
scanInfo[len] = '\0'; /* null terminate the string */
close(hdmiScanInfoFile);
}
/*
* The scan_info contains the three fields
* PT - preferred video format
* IT - video format
* CE video format - containing the underscan support information
*/
/* PT */
ce_info_str = strtok_r(scanInfo, token, &save_ptr);
if (ce_info_str) {
/* IT */
ce_info_str = strtok_r(NULL, token, &save_ptr);
if (ce_info_str) {
/* CE */
ce_info_str = strtok_r(NULL, token, &save_ptr);
if (ce_info_str)
ce_info = atoi(ce_info_str);
}
}
if (ce_info_str) {
// ce_info contains the underscan information
if (ce_info == HDMI_SCAN_ALWAYS_UNDERSCANED ||
ce_info == HDMI_SCAN_BOTH_SUPPORTED)
// if TV supported underscan, then driver will always underscan
// hence no need to apply action safe rectangle
mUnderscanSupported = true;
} else {
ALOGE("%s: scan_info string error", __FUNCTION__);
}
// Store underscan support info in a system property
const char* prop = (mUnderscanSupported) ? "1" : "0";
property_set("hw.underscan_supported", prop);
return;
}
int bt_enable() {
LOGV(__FUNCTION__);
int ret = -1;
int hci_sock = -1;
int attempt;
LOGD(__FUNCTION__);
if (set_bluetooth_power(1) < 0) goto out;
LOGD("Starting hciattach daemon");
if (property_set("ctl.start", "hciattach") < 0) {
LOGE("##Failed to start hciattach");
set_bluetooth_power(0);
goto out;
}
LOGD("Starting hciattach daemon A");
// Try for 10 seconds, this can only succeed once hciattach has sent the
// firmware and then turned on hci device via HCIUARTSETPROTO ioctl
#define TRY_TIME 1000
for (attempt = TRY_TIME; attempt > 0; attempt--) {
hci_sock = create_hci_sock();
if (hci_sock < 0) {
goto out;
}
ret = ioctl(hci_sock, HCIDEVUP, HCI_DEV_ID);
if (!ret) {
break;
}else{
if (1==attempt)
LOGE("ioctl error: %s (%d)", strerror(errno), errno);
}
close(hci_sock);
usleep(10000); // 10 ms retry delay
}
if (attempt == 0) {
LOGE("%s: Timeout waiting for HCI device to come up [### ERROR ###]", __FUNCTION__);
if (property_set("ctl.stop", "hciattach") < 0) {
LOGE("Error stopping hciattach");
}
set_bluetooth_power(0);
goto out;
}
LOGI("%s: %d.%2d seconds\n", __FUNCTION__,(TRY_TIME - attempt)/100,(TRY_TIME - attempt)%100 );
LOGI("Starting bluetoothd deamon");
if (property_set("ctl.start", "bluetoothd") < 0) {
LOGE("Failed to start bluetoothd");
set_bluetooth_power(0);
goto out;
}
ret = 0;
out:
if (hci_sock >= 0) close(hci_sock);
return ret;
}
void *eng_vdiag_rthread(void *x)
{
int ser_fd, modem_fd,test_fd = -1;
int r_cnt, w_cnt, offset;
int retry_num = 0;
int dumpmemlen = 0;
int ret = -1;
int flag = 0;
s_dev_info = (eng_dev_info_t*)x;
char get_propvalue[PROPERTY_VALUE_MAX] = {0};
ENG_LOG("eng_vdiag_r thread start\n");
/*open usb/uart*/
ENG_LOG("eng_vdiag_r open serial...\n");
ENG_LOG("eng_vdiag_r s_dev_info->host_int.dev_diag=%s\n",s_dev_info->host_int.dev_diag);
ser_fd = eng_open_dev(s_dev_info->host_int.dev_diag, O_WRONLY);
if(ser_fd < 0) {
ENG_LOG("eng_vdiag_r open serial failed, error: %s\n", strerror(errno));
return NULL;
}
if(s_dev_info->host_int.dev_type == CONNECT_UART){
set_raw_data_speed(ser_fd, 115200);
}
s_ser_diag_fd = ser_fd;
/*open vbpipe/spipe*/
ENG_LOG("eng_vdiag_r open SIPC channel...\n");
do{
modem_fd = open(s_dev_info->modem_int.diag_chan, O_RDONLY);
if(modem_fd < 0) {
ENG_LOG("eng_vdiag_r cannot open %s, error: %s\n", s_dev_info->modem_int.diag_chan, strerror(errno));
sleep(5);
}
if((++retry_num) > MAX_OPEN_TIMES) {
ENG_LOG("eng_vdiag_r SIPC open times exceed the max times, vlog thread stopped.\n");
goto out;
}
}while(modem_fd < 0);
if(s_dev_info->host_int.cali_flag && (s_dev_info->host_int.dev_type == CONNECT_USB) && !g_ap_cali_flag){
eng_usb_enable();
}
ENG_LOG("eng_vdiag_r put log data from SIPC to serial\n");
while(1) {
int split_flag = 0;
memset(diag_data, 0, sizeof(diag_data));
r_cnt = read(modem_fd, diag_data, DATA_BUF_SIZE);
if (r_cnt <= 0) {
ENG_LOG("eng_vdiag_r read no log data : r_cnt=%d, %s\n", r_cnt, strerror(errno));
continue;
}
if(CONNECT_UART == s_dev_info->host_int.dev_type){
property_set("sys.config.engcplog.enable","1");
}
property_get("sys.config.engcplog.enable", get_propvalue, "not_find");
if((0 == strcmp(get_propvalue, "1")) && (1 == s_dev_info->host_int.cali_flag)){
ENG_LOG("%s sys.config.engcplog.enable= %s\n",__FUNCTION__, get_propvalue);
if (flag == 0) {
ret = create_log_dir();
if (!ret) {
flag = 1;
test_fd = open_log_path();
if(test_fd < 0){
ENG_LOG("eng_vdiag_r cannot open %s.\n", external_path);
}
}
}
if (test_fd >= 0) {
ret = eng_write_data_to_file(diag_data,r_cnt,test_fd);
if(ret < 0){
ENG_LOG("eng_vdiag_r write to logfile failed\n");
}
}
ENG_LOG("%s: r_cnt=%d\n", __FUNCTION__,r_cnt);
eng_filter_calibration_log_diag(diag_data,r_cnt,ser_fd);
}else{
// printf dump memory len
dump_mem_len_print(r_cnt, &dumpmemlen);
if( 0 == eng_diag_write2pc(diag_data, r_cnt, ser_fd)){
close(modem_fd);
return 0;
}
}
}
out:
ENG_LOG("eng_vdiag_r thread end\n");
if (modem_fd >= 0)
close(modem_fd);
if (test_fd >= 0)
close(test_fd);
close(ser_fd);
return 0;
}
bool InitConfig(const char* property_value) {
config.reset(new Config);
property_set("libc.debug.malloc.options", property_value);
return config->SetFromProperties();
}
int property_set_overwirte(const char *name, const char *value, int allow_overwirte_ro) ////Lenovo [EasyImage]
{
prop_info *pi;
int ret;
size_t namelen = strlen(name);
size_t valuelen = strlen(value);
if (!is_legal_property_name(name, namelen)) {
ERROR("PropSet Error:[%s:%s] property name is illegal\n", name, value);
return -1;
}
if (valuelen >= PROP_VALUE_MAX) {
ERROR("PropSet Error:[%s:%s] valuelen %d >= %d\n", name, value, valuelen, PROP_VALUE_MAX);
return -1;
}
#ifdef MTK_INIT
INFO("PropSet [%s:%s] Start>>\n", name, value);
#endif
pi = (prop_info*) __system_property_find(name);
if(pi != 0) {
/* ro.* properties may NEVER be modified once set */
if(allow_overwirte_ro!= 1 && !strncmp(name, "ro.", 3)){
#ifdef MTK_INIT
ERROR("PropSet Error:[%s:%s] ro.* properties may NEVER be modified once set\n", name, value);
#endif
return -1;
}
__system_property_update(pi, value, valuelen);
} else {
#ifdef INIT_ENG_BUILD
prop_area *pa = __system_property_area__;
if ((pa->bytes_used > PA_SIZE_ERR) && (0 == alarmed ))
{
alarmed = 1;
ERROR("[Property Error]: Unable to set [%s:%s] property limit has arrived: %d\n", name, value, pa->bytes_used);
#ifdef MTK_INIT
property_show();
#endif
}
else if ((pa->bytes_used > PA_SIZE_WARN) && (0 == warned ))
{
warned = 1;
NOTICE("[Property Warning]: limit would be arrived:%d (Max:%d). "
"Use getprop to review your properties!\n", pa->bytes_used, PA_SIZE);
#ifdef MTK_INIT
property_show();
#endif
}
#endif
ret = __system_property_add(name, namelen, value, valuelen);
if (ret < 0) {
#ifdef INIT_ENG_BUILD
ERROR("Failed to set '%s'='%s' bytes_used=%u\n", name, value, pa->bytes_used);
#else
ERROR("Failed to set '%s'='%s'\n", name, value);
#endif
return ret;
}
}
/* If name starts with "net." treat as a DNS property. */
if (strncmp("net.", name, strlen("net.")) == 0) {
if (strcmp("net.change", name) == 0) {
#ifdef MTK_INIT
INFO("PropSet [%s:%s] Done\n", name, value);
#endif
return 0;
}
/*
* The 'net.change' property is a special property used track when any
* 'net.*' property name is updated. It is _ONLY_ updated here. Its value
* contains the last updated 'net.*' property.
*/
property_set("net.change", name);
} else if (persistent_properties_loaded &&
strncmp("persist.", name, strlen("persist.")) == 0) {
/*
* Don't write properties to disk until after we have read all default properties
* to prevent them from being overwritten by default values.
*/
write_persistent_property(name, value);
} else if (strcmp("selinux.reload_policy", name) == 0 &&
strcmp("1", value) == 0) {
selinux_reload_policy();
}
property_changed(name, value);
#ifdef MTK_INIT
INFO("PropSet [%s:%s] Done\n", name, value);
#endif
return 0;
}
/*
* Start the dhcp client daemon, and wait for it to finish
* configuring the interface.
*
* The device init.rc file needs a corresponding entry for this work.
*
* Example:
* service dhcpcd_<interface> /system/bin/dhcpcd -ABKL -f dhcpcd.conf
*/
int dhcp_do_request(const char *interface,
char *ipaddr,
char *gateway,
uint32_t *prefixLength,
char *dns[],
char *server,
uint32_t *lease,
char *vendorInfo,
char *domain,
char *mtu)
{
char result_prop_name[PROPERTY_KEY_MAX];
char daemon_prop_name[PROPERTY_KEY_MAX];
char prop_value[PROPERTY_VALUE_MAX] = {'\0'};
char daemon_cmd[PROPERTY_VALUE_MAX * 2 + sizeof(DHCP_CONFIG_PATH)];
const char *ctrl_prop = "ctl.start";
const char *desired_status = "running";
/* Interface name after converting p2p0-p2p0-X to p2p to reuse system properties */
char p2p_interface[MAX_INTERFACE_LENGTH];
get_p2p_interface_replacement(interface, p2p_interface);
snprintf(result_prop_name, sizeof(result_prop_name), "%s.%s.result",
DHCP_PROP_NAME_PREFIX,
p2p_interface);
snprintf(daemon_prop_name, sizeof(daemon_prop_name), "%s_%s",
DAEMON_PROP_NAME,
p2p_interface);
/* Erase any previous setting of the dhcp result property */
property_set(result_prop_name, "");
/* HACK: Sometimes the lease file appears to be corrupted, which can cause
* unknown errors while obtaining an address. We just remove the corresponding
* lease file prior to starting the daemon...
*/
{
char lease_file_path[PROPERTY_VALUE_MAX];
snprintf(lease_file_path, sizeof(lease_file_path),
"/data/misc/dhcp/dhcpcd-%s.lease",
p2p_interface);
unlink(lease_file_path);
}
/* Start the daemon and wait until it's ready */
if (property_get(HOSTNAME_PROP_NAME, prop_value, NULL) && (prop_value[0] != '\0'))
snprintf(daemon_cmd, sizeof(daemon_cmd), "%s_%s:-f %s -h %s %s", DAEMON_NAME,
p2p_interface, DHCP_CONFIG_PATH, prop_value, interface);
else
snprintf(daemon_cmd, sizeof(daemon_cmd), "%s_%s:-f %s %s", DAEMON_NAME,
p2p_interface, DHCP_CONFIG_PATH, interface);
memset(prop_value, '\0', PROPERTY_VALUE_MAX);
property_set(ctrl_prop, daemon_cmd);
if (wait_for_property(daemon_prop_name, desired_status, 10) < 0) {
snprintf(errmsg, sizeof(errmsg), "%s", "Timed out waiting for dhcpcd to start");
return -1;
}
/* Wait for the daemon to return a result */
if (wait_for_property(result_prop_name, NULL, 30) < 0) {
snprintf(errmsg, sizeof(errmsg), "%s", "Timed out waiting for DHCP to finish");
return -1;
}
if (!property_get(result_prop_name, prop_value, NULL)) {
/* shouldn't ever happen, given the success of wait_for_property() */
snprintf(errmsg, sizeof(errmsg), "%s", "DHCP result property was not set");
return -1;
}
if (strcmp(prop_value, "ok") == 0) {
char dns_prop_name[PROPERTY_KEY_MAX];
if (fill_ip_info(interface, ipaddr, gateway, prefixLength, dns,
server, lease, vendorInfo, domain, mtu) == -1) {
return -1;
}
return 0;
} else {
snprintf(errmsg, sizeof(errmsg), "DHCP result was %s", prop_value);
return -1;
}
}
static void load_persistent_properties()
{
DIR* dir = opendir(PERSISTENT_PROPERTY_DIR);
int dir_fd;
struct dirent* entry;
char value[PROP_VALUE_MAX];
int fd, length;
struct stat sb;
if (dir) {
dir_fd = dirfd(dir);
while ((entry = readdir(dir)) != NULL) {
if (strncmp("persist.", entry->d_name, strlen("persist.")))
continue;
#if HAVE_DIRENT_D_TYPE
if (entry->d_type != DT_REG)
continue;
#endif
/* open the file and read the property value */
fd = openat(dir_fd, entry->d_name, O_RDONLY | O_NOFOLLOW);
if (fd < 0) {
ERROR("Unable to open persistent property file \"%s\" errno: %d\n",
entry->d_name, errno);
continue;
}
if (fstat(fd, &sb) < 0) {
ERROR("fstat on property file \"%s\" failed errno: %d\n", entry->d_name, errno);
close(fd);
continue;
}
// File must not be accessible to others, be owned by root/root, and
// not be a hard link to any other file.
if (((sb.st_mode & (S_IRWXG | S_IRWXO)) != 0)
|| (sb.st_uid != 0)
|| (sb.st_gid != 0)
|| (sb.st_nlink != 1)) {
ERROR("skipping insecure property file %s (uid=%u gid=%u nlink=%d mode=%o)\n",
entry->d_name, (unsigned int)sb.st_uid, (unsigned int)sb.st_gid,
sb.st_nlink, sb.st_mode);
close(fd);
continue;
}
length = read(fd, value, sizeof(value) - 1);
if (length >= 0) {
value[length] = 0;
property_set(entry->d_name, value);
} else {
ERROR("Unable to read persistent property file %s errno: %d\n",
entry->d_name, errno);
}
close(fd);
}
closedir(dir);
} else {
ERROR("Unable to open persistent property directory %s errno: %d\n", PERSISTENT_PROPERTY_DIR, errno);
}
persistent_properties_loaded = 1;
}
int do_wifi_workaround() {
property_set("ctl.start", WIFI_FIX_SVC);
return 0;
}
int do_setprop(int nargs, char **args)
{
property_set(args[1], args[2]);
return 0;
}
bool SFWatchDog::threadLoop() {
XLOGV("[%s]", __func__);
{
Mutex::Autolock _l(mScreenLock);
}
nsecs_t stopTime = 1;
if (isSFThreadHang(&stopTime)) {
char cmds[256];
static uint32_t rtt_ct = SW_WATCHDOG_RTTCOUNT;
if (rtt_ct > 0) {
rtt_ct --;
} else {
XLOGD("[SF-WD] swap rtt dump file");
// swap rtt dump file
snprintf(cmds, sizeof(cmds), "mv %s.txt %s_1.txt", RTT_DUMP, RTT_DUMP);
system(cmds);
rtt_ct = SW_WATCHDOG_RTTCOUNT;
}
// append SurfaceFlinger rtt information to rtt file
char filename[100];
snprintf(filename, sizeof(filename), "%s.txt", RTT_DUMP);
int fd = open(filename, O_CREAT | O_WRONLY | O_NOFOLLOW, 0666); /* -rw-rw-rw- */
if (fd < 0) {
ALOGE("Can't open %s: %s\n", filename, strerror(errno));
return true;
}
if (lseek(fd, 0, SEEK_END) < 0) {
fprintf(stderr, "lseek: %s\n", strerror(errno));
} else {
dump_backtrace_to_file(getpid(), fd);
}
close(fd);
XLOGD("[SF-WD] dump rtt file: %s.txt", RTT_DUMP);
XLOGW("[SF-WD] ============================================");
} else {
stopTime = 1;
}
getProperty();
char value[PROPERTY_VALUE_MAX];
snprintf(value, sizeof(value), "%" PRId64 " ", stopTime);
if (stopTime < 0 || stopTime >= 2147483247) {
volatile nsecs_t tmpStopTime = stopTime;
XLOGD("[SF-WD] tmpStopTime=(%" PRId64 ", %" PRId64 ")", tmpStopTime, stopTime);
abort();
}
uint32_t ret = property_set("service.sf.status", value);
if (mUpdateCount) {
if (mShowLog)
XLOGV("[SF-WD] mUpdateCount: %d", mUpdateCount);
#if 0
aee_ioctl_wdt_kick(WDT_SETBY_SF);
#endif
mUpdateCount = 0;
}
//else {
// XLOGV("[SF-WD] mUpdateCount not update!!!!!: %d", mUpdateCount);
// aee_ioctl_wdt_kick(WDT_SETBY_SF_NEED_NOT_UPDATE);
//}
usleep(mTimer * 1000);
return true;
}
