void load_interfaces(interface *inter)
{
struct ifaddrs *addrs,*tmp;
struct interface *buffor;
getifaddrs(&addrs);
tmp = addrs;
while (tmp)
{
if((buffor=search_interface_name(inter,tmp->ifa_name)) != NULL)
{
set_interface(buffor,tmp);
}
else
{
if(strncmp(inter->name,"\0",1) == 0)
set_interface(inter,tmp);
else
{
buffor=search_interface_last(inter);
buffor->next = malloc(sizeof(interface));
memset_struct(buffor->next);
set_interface(buffor->next,tmp);
}
}
tmp = tmp->ifa_next;
}
freeifaddrs(addrs);
}
StorageReal(CreatorInt& creat, IRef<eprovider::Storage> ifa,
Index ses)
: CreatureDefaultImplementation(creat)
{
set_interface(ifa,false,Monitor());
session = ses;
}
char MySniff::cfg_read_fname(char *file_name)
{
if (this->status==TH_STARTED){
this->stop();
}
if (this->status==TH_STOPPED){
new_dev_clean();
if (file_name==NULL){
xlog_err(LEVEL2,parent,"Alert","Null file name");
return -1;
}
if (set_read_file(file_name) != 0){
xlog_err(LEVEL2,parent,"Alert","Can't set read file name");
return -1;
}
if (set_interface() < 0){
xlog_err(LEVEL2,parent,"Alert","Can't read data from %s",file_name);
return -1;
}
settings = settings | XSNIFF_SETTING_IS_SET_INTERFACE;
return 0;
}else{
xlog_err(LEVEL2,parent,"Alert","Can't stop thread, before starting a new one (in read)");
return -1;
}
}
static void msd()
{
#if 1
unsigned InEndPt = 1;
unsigned OutEndPt = 1;
#else
unsigned InEndPt = 1;
unsigned OutEndPt = 2;
#endif
unsigned char abBuf[512];
int i;
// set_config(1); - the culprit
set_interface(0, 0);
#if 0
/* Send an Get Max LUN request */
abBuf[0] = 0;
if (doctrl(VUSB_DIR_TO_HOST | VUSB_REQ_CLASS | VUSB_TO_INTERFACE,
0xfe /* max lun */, 0, 1, 1, abBuf, "get max lun") >= 0)
printf("max luns: %d\n", abBuf[0]);
#endif
for (i = 0; i < 3; i++)
{
printf("i=%d\n", i);
/* Send an INQUIRY command to ep 2 */
memset(abBuf, 0, sizeof(abBuf));
memcpy(abBuf, "USBC", 4);
*(uint32_t *)(&abBuf[4]) = 0x12330984 ;
//abBuf[8] = 0x08;
abBuf[8] = 0x24;
abBuf[0xc] = 0x80;
abBuf[0xe] = 0x06; /* cmd length */
abBuf[0x0f] = 0x12; /* cmd - INQUIRY */
abBuf[0x13] = 0x24;
hex(abBuf, 31, "intquery req");
if (send_bulk(OutEndPt, abBuf, 31) < 0)
return;
//usleep(15000);
/* read result */
memset(abBuf, 0, sizeof(abBuf));
//printf("recv..\n");
int cb = recv_bulk(InEndPt, abBuf, 36);
hex(abBuf, cb, "inquiry result");
/* sense? */
memset(abBuf, 0, sizeof(abBuf));
cb = recv_bulk(InEndPt, abBuf, 36);
hex(abBuf, cb, "inquiry sense?");
usleep(150000);
}
}
//-----------------------------------------------------------------
// usb_process_request:
//-----------------------------------------------------------------
static void usb_process_request(struct device_request *request, unsigned char type, unsigned char req, unsigned char *data)
{
if ( type == USB_STANDARD_REQUEST )
{
// Standard requests
switch (req)
{
case REQ_GET_STATUS:
get_status(request);
break;
case REQ_CLEAR_FEATURE:
clear_feature(request);
break;
case REQ_SET_FEATURE:
set_feature(request);
break;
case REQ_SET_ADDRESS:
set_address(request);
break;
case REQ_GET_DESCRIPTOR:
get_descriptor(request);
break;
case REQ_GET_CONFIGURATION:
get_configuration(request);
break;
case REQ_SET_CONFIGURATION:
set_configuration(request);
break;
case REQ_GET_INTERFACE:
get_interface(request);
break;
case REQ_SET_INTERFACE:
set_interface(request);
break;
default:
log_printf(USBLOG_ERR, "USB: Unknown standard request %x\n", req);
usbhw_control_endpoint_stall();
break;
}
}
else if ( type == USB_VENDOR_REQUEST )
{
log_printf(USBLOG_ERR, "Vendor: Unknown command\n");
// None supported
usbhw_control_endpoint_stall();
}
else if ( type == USB_CLASS_REQUEST && _class_request)
{
_class_request(req, request->wValue, request->wIndex, data, request->wLength);
}
else
usbhw_control_endpoint_stall();
}
//----------------------------------------------------------------------------
//----------------------------------------------------------------------------
void SuifPrinterModule::initialize()
{
Module::initialize();
// register as a listener
ModuleSubSystem *ms = get_suif_env()->get_module_subsystem();
ms->register_interface_listener(this, "print_init");
// ms->register_interface_producer(this, "print");
set_interface("print", (Address)SuifPrinterModule::print_dispatch);
init();
}
StorageReal(CreatorInt& creat, IRef<eprovider::Storage> ifa,
const wchar_t* path, bool create_if_not_exists)
: CreatureDefaultImplementation(creat)
{
set_interface(ifa,true,Monitor());
Monitor monitor;
SIMPLE_CALL( (session = ifa->createSession(error)) );
SIMPLE_CALL( (ifa->openPath(session,path,create_if_not_exists,error)) );
//TODO: what if error???
}
void sr_integ_add_interface(struct sr_instance* sr,
struct sr_vns_if* vns_if/* borrowed */)
{
printf(" ** sr_integ_add_interface(..) called \n");
struct sr_router* subsystem = (struct sr_router*)sr_get_subsystem(sr);
subsystem->interface[subsystem->num_interfaces] = set_interface(vns_if, subsystem->num_interfaces);
#ifdef _CPUMODE_
write_interface_hw(subsystem);
#endif
subsystem->num_interfaces = subsystem->num_interfaces + 1;
printf(" ** sr_integ_add_interface(..) current no. of interfaces: %u\n", subsystem->num_interfaces);
} /* -- sr_integ_add_interface -- */
void CPrintStyleModule::initialize() {
Module::initialize();
_print_map =
new CascadingMap<string_gen_fn>(get_suif_env(), default_string_gen_fn);
#define HANDLE_DISPATCH(lower, name) \
set_print_function( name ## ::get_class_name(), \
handle_static_ ## lower ## );
#include "obj.defs"
#undef HANDLE_DISPATCH
set_interface("print", (Address)CPrintStyleModule::print_dispatch);
}
int main(int argc, char **argv)
{
g_fd = open(argv[1], O_RDWR);
if (g_fd < 0)
return bitch("open");
reset();
usb_set_connected(0, 1);
claim_if(0);
// set_config(1); - the culprit!
set_interface(0, 0);
msd();
return 0;
}
NTSTATUS set_interface_ex(libusb_device_t *dev,
interface_request_t* interface_request,
int timeout)
{
NTSTATUS status = STATUS_SUCCESS;
USB_INTERFACE_DESCRIPTOR *interface_descriptor = NULL;
USBMSG("interface-%s=%d alt-%s=%d timeout=%d\n",
interface_request->intf_use_index ? "index" : "number",
interface_request->intf_use_index ? interface_request->interface_index : interface_request->interface_number,
interface_request->altf_use_index ? "index" : "number",
interface_request->altf_use_index ? interface_request->altsetting_index : interface_request->altsetting_number,
timeout);
interface_descriptor = find_interface_desc_ex(dev->config.descriptor,dev->config.total_size,interface_request,NULL);
if (!interface_descriptor)
{
return STATUS_NO_MORE_ENTRIES;
}
return set_interface(dev,interface_descriptor->bInterfaceNumber, interface_descriptor->bAlternateSetting, timeout);
}
char MySniff::cfg_interface(char *name)
{
new_dev_clean();
set_dev_name(name);
if (set_interface()<0){
xlog_err(LEVEL2,parent,"Alert","This is not an supported wireless device. Check if the device is wireless and you have enabled monitor mode");
return -1;
}
//TODO we should use G.freq and not default one
settings = settings | XSNIFF_SETTING_IS_SET_INTERFACE;
if (is_offline() == 0){
if (this->cfg_chann()!=0){
xlog_err(LEVEL7,parent,"Alert","Please set custom channels before start capturing");
//return -1;
//!?
}
}
return 0;
}
void LocationModule::initialize() {
Module::initialize();
set_interface("get_object_location",
(Address)LocationModule::get_object_location);
}
void USBTester::callback_set_interface(uint16_t interface, uint8_t alternate)
{
complete_set_interface(set_interface(interface, alternate));
}
/* Main server module common for all transports
* This module will do the initial transport setups.
* Then it receives the command from client in CDC format
* and transmits the response back to the client.
* In the case of socket, it receives the command from the client
* and sends the response directly to the client via TCP socket.
*
* In the case of serial & wifi , it receives the command from the driver
* and sends the response to the driver.
*/
int
remote_server_exec(int argc, char **argv, void *wl)
{
int err;
int transport_descriptor;
char *async_cmd_flag = NULL;
int skip;
int download_flag = 0;
#if defined(LINUX) || defined(vxworks) || defined(OLYMPIC_RWL)
char old_intf_name[IFNAMSIZ];
#endif
#ifdef WIN32
char shell_fname[MAX_SHELL_FILE_LENGTH];
DWORD dwlen;
#endif
#ifdef RWL_DONGLE
int uart_enable = 1;
/* To set dongle flag when dongle server starts */
if ((err = rwl_var_setbuf(wl, dongleset, &uart_enable,
sizeof(int))) < 0) {
DPRINT_INFO(OUTPUT, "Unable to send to wl driver,error=%d\n", err);
}
#endif
if (rwl_iovar_check (wl) < 0) {
DPRINT_ERR(ERR, "wl_server: RWL_WIFI/RWL_DONGLE not defined ");
DPRINT_ERR(ERR, "Or In-Dongle mode enabled\n");
exit(0);
}
/* Initialise for all the transports - socket, serial, and wifi
* In Socket transport, main socket handler will be returned.
*/
if ((transport_descriptor = rwl_transport_setup(argc, argv)) < 0)
return BCME_ERROR;
#ifdef RWL_WIFI
remote_wifi_ser_init_cmds(wl);
#endif
/* Create a directory /tmp/RWL for the shell response files */
if (rwl_create_dir() < 0)
return BCME_ERROR;
#ifdef RWLASD
/* DUT initialization function */
wfa_dut_init(&trafficBuf, &respBuf, &parmsVal, &xcCmdBuf, &toutvalp);
#endif
#if defined(LINUX) || defined(vxworks)
/* Copy old interface name to restore it */
store_old_interface(wl, old_intf_name);
#endif /* defined(LINUX) || defined(vxworks) */
while (1) {
uchar *buf_ptr = NULL;
#ifdef VISTA_SERVER
int index;
char *vista_buf[MAX_VISTA_ARGC];
#endif
#ifdef RWL_SERIAL
g_rwl_hndle = transport_descriptor;
#else
g_rwl_hndle = -1;
#endif
#ifdef RWL_DONGLE
if (set_ctrlc) {
uart_enable = 0;
if ((err = rwl_var_setbuf(wl, dongleset, &uart_enable,
sizeof(int))) < 0) {
DPRINT_INFO(OUTPUT, "Unable to send to wl driver,error=%d\n", err);
}
set_ctrlc = 0;
exit(0);
}
#endif /* RWL_DONGLE */
/* Receive the CDC header */
if ((remote_rx_header(wl, transport_descriptor)) == BCME_ERROR) {
DPRINT_DBG(OUTPUT, "\n Waiting for client to transmit command\n");
continue;
}
DPRINT_INFO(OUTPUT, "REC : cmd %d\t msg len %d msg flag %d\t msg status %d\n",
g_rem_ptr->msg.cmd, g_rem_ptr->msg.len,
g_rem_ptr->msg.flags, g_rem_ptr->msg.status);
#ifdef RWL_WIFI
/* send the response to remote if it is findserver cmd, this is specific to wifi */
if (g_rem_ptr->msg.flags & REMOTE_FINDSERVER_IOCTL) {
remote_wifi_response(wl);
continue;
}
#endif /* RWL_WIFI */
/*
* Allocate buffer only if there is a response message expected.
* Some commands such as up/down do not output anything.
*/
if (g_rem_ptr->msg.len) {
if ((buf_ptr = malloc(g_rem_ptr->msg.len)) == NULL) {
DPRINT_ERR(ERR, "malloc of %d bytes failed\n", g_rem_ptr->msg.len);
continue;
}
}
/* Receive the data */
if ((err = remote_rx_data(buf_ptr)) == BCME_ERROR) {
if (buf_ptr)
free(buf_ptr);
continue;
}
/* Process RWL negotiate commands */
if (g_rem_ptr->msg.flags & REMOTE_NEGOTIATE_CMD) {
if (g_rem_ptr->msg.cmd == NEGOTIATE_GET_OS) {
if (g_rem_ptr->msg.len >= sizeof(int)) {
#if defined(LINUX)
*(int*)buf_ptr = LINUX_OS;
#elif defined(VISTA_SERVER)
*(int*)buf_ptr = WINVISTA_OS;
#elif defined(WIN32)
*(int*)buf_ptr = WIN32_OS;
#elif defined(MACOSX)
*(int*)buf_ptr = MAC_OSX;
#else
*(int*)buf_ptr = UNKNOWN_OS;
#endif
g_rem_ptr->msg.len = sizeof(int);
DPRINT_INFO(OUTPUT, "RESP : os type %d\n", *(int*)buf_ptr);
if (remote_tx_response(wl, buf_ptr, 0) < 0)
DPRINT_ERR(ERR, "\nReturn results failed\n");
}
}
#ifdef RWL_SOCKET
close_sock_handle(g_rwl_hndle);
#endif /* RWL_SOCKET */
if (buf_ptr)
free(buf_ptr);
continue;
}
/* Process command */
if (g_rem_ptr->msg.flags & REMOTE_SHELL_CMD) {
/* Get the response length first and get the response buffer in case of
* synchronous shell commands and the buf_ptr will have the response file
* name. In case of asynchronous shell commands, buf_ptr
* will be get updated by the remote_shell_execute function.
*/
need_speedy_response = 1;
#ifndef WIN32
if (buf_ptr) {
async_cmd_flag = strstr((char*)buf_ptr, "%");
}
if ((err = remote_shell_execute((char*)buf_ptr, wl)) > 0) {
if (async_cmd_flag)
g_rem_ptr->msg.len = err;
}
/* Sync shell command: No need to send response from here */
else {
#ifdef RWL_SOCKET
/* Transmitted to client. Then close the handle &
* get the new handle for next transmission & reception.
*/
close_sock_handle(g_rwl_hndle);
#endif /* RWL_SOCKET */
continue;
}
#else
if ((err = remote_shell_execute((char*)buf_ptr, wl)) != SUCCESS) {
DPRINT_ERR(ERR, "Error in executing shell command\n");
if (buf_ptr)
free(buf_ptr);
#ifdef RWL_SOCKET
/* Transmitted to client. Then close the handle &
* get the new handle for next transmission & reception.
*/
close_sock_handle(g_rwl_hndle);
#endif /* RWL_SOCKET */
continue;
}
/* Get the response from the temporary file */
if ((err = remote_shell_get_resp(shell_fname, wl)) != SUCCESS) {
DPRINT_ERR(ERR, "Error in executing shell command\n");
}
if (buf_ptr)
free(buf_ptr);
#ifdef RWL_SOCKET
/* Transmitted to client. Then close the handle &
* get the new handle for next transmission & reception.
*/
close_sock_handle(g_rwl_hndle);
#endif /* RWL_SOCKET */
continue;
#endif /* WIN32 */
} /* REMOTE_SHELL_CMD */
#ifdef RWLASD
if (g_rem_ptr->msg.flags & REMOTE_ASD_CMD) {
if ((err = remote_asd_exec(buf_ptr, (int *)&g_rem_ptr->msg.len)) < 0) {
DPRINT_ERR(ERR, "Error in executing asd command\n");
}
} /* REMOTE_ASD_CMD */
#endif
/*
* added to take care of OID base problem for cross OS RWL cleint server
* In case of LX Server and WIN32 client OID base need to be removed
* In case of WIN32 server and LX client OID base need to be added
*/
if (!(g_rem_ptr->msg.flags & REMOTE_ASD_CMD)) {
#if defined(LINUX) || defined(vxworks)
if (g_rem_ptr->msg.cmd > MAX_IOVAR)
g_rem_ptr->msg.cmd -= WL_OID_BASE;
#endif
#if defined(WIN32)
if (g_rem_ptr->msg.cmd < MAX_IOVAR)
g_rem_ptr->msg.cmd += WL_OID_BASE;
#endif
}
#ifdef VISTA_SERVER
if (g_rem_ptr->msg.flags & REMOTE_VISTA_CMD) {
vista_buf[0] = strtok(buf_ptr, " \t\n");
for (index = 1; (vista_buf[index] = strtok(NULL, " \t\n")) != NULL;
index++);
if ((err = remote_vista_exec(wl, vista_buf)) < 0) {
DPRINT_ERR(ERR, "Error in executing vista command\n");
}
memcpy(buf_ptr, vista_buf[0], strlen(vista_buf[0]));
g_rem_ptr->msg.len = strlen(vista_buf[0]);
} /* REMOTE_VISTA_CMD */
#endif /* VISTA_SERVER */
#ifndef OLYMPIC_RWL
#if defined(LINUX) || defined(vxworks)
#ifndef RWL_DONGLE
if (g_rem_ptr->msg.flags & REMOTE_GET_IOCTL ||
g_rem_ptr->msg.flags & REMOTE_SET_IOCTL) {
if (strlen(g_rem_ptr->intf_name) != 0) {
#if defined(LINUX)
struct ifreq ifr;
/* validate the interface */
memset(&ifr, 0, sizeof(ifr));
if (g_rem_ptr->intf_name)
strncpy(ifr.ifr_name, g_rem_ptr->intf_name, IFNAMSIZ);
if (wl_check((void *)&ifr)) {
DPRINT_ERR(ERR, "%s: wl driver adapter not found\n",
g_rem_ptr->intf_name);
/* Signal end of command output */
g_rem_ptr->msg.len = 0;
remote_tx_response(wl, NULL, BCME_NODEVICE);
if (buf_ptr)
free(buf_ptr);
#ifdef RWL_SOCKET
close_sock_handle(g_rwl_hndle);
#endif
continue;
}
#endif /* LINUX */
#if defined(vxworks)
if (wl_check((void *)g_rem_ptr->intf_name)) {
DPRINT_ERR(ERR, "%s: wl driver adapter not found\n",
g_rem_ptr->intf_name);
/* Signal end of command output */
g_rem_ptr->msg.len = 0;
remote_tx_response(wl, NULL, BCME_NODEVICE);
if (buf_ptr)
free(buf_ptr);
#ifdef RWL_SOCKET
close_sock_handle(g_rwl_hndle);
#endif
continue;
}
#endif /* vxworks */
if (set_interface(wl, g_rem_ptr->intf_name) == BCME_OK)
DPRINT_DBG(OUTPUT, "\n %s Interface will be used \n",
(char *)wl);
}
}
#endif /* ifndef RWL_DONGLE */
#endif /* defined(LINUX) || defined(vxworks) */
#endif /* ifndef OLYMPIC_RWL */
if (g_rem_ptr->msg.flags & REMOTE_SET_IOCTL ||
g_rem_ptr->msg.flags & RDHD_SET_IOCTL) {
#ifdef WIN32
#if defined (RWL_DONGLE) || defined (RWL_WIFI)
/* For commands with msg length as zero initialize the buffer to null */
if (g_rem_ptr->msg.len == 0)
buf_ptr = NULL;
#endif
#else
if (g_rem_ptr->msg.len == 0)
buf_ptr = NULL;
#endif /* WIN32 */
#if defined(LINUX) || defined(TARGETOS_symbian) || defined(TARGETOS_nucleus) || defined(MACOSX) || defined(TARGET_wiced)
#ifdef OLYMPIC_RWL
set_interface(wl, old_intf_name);
#endif
#if defined( TARGET_wiced )
set_interface(wl, g_rem_ptr->intf_name);
#endif
if (g_rem_ptr->msg.flags & REMOTE_SET_IOCTL) {
if (g_rem_ptr->msg.cmd == WLC_SET_VAR && buf_ptr &&
!strncmp((const char *)buf_ptr,
"init", g_rem_ptr->msg.len)) {
DPRINT_INFO(OUTPUT, "REC : init command\n");
err = 0;
} else if (g_rem_ptr->msg.cmd == WLC_SET_VAR && buf_ptr &&
!strncmp((const char *)buf_ptr,
"download", g_rem_ptr->msg.len)) {
DPRINT_INFO(OUTPUT, "REC : download command\n");
download_flag = download_flag? 0: 1;
if (download_flag) {
DPRINT_INFO(OUTPUT, "download started\n");
start_download( );
} else {
DPRINT_INFO(OUTPUT, "download completed\n");
finish_download( );
}
err = 0;
} else if (g_rem_ptr->msg.cmd == WLC_SET_VAR && buf_ptr &&
!strncmp((const char *)buf_ptr,
"membytes", g_rem_ptr->msg.len)) {
DPRINT_INFO(OUTPUT, "REC : membytes command\n");
skip = strlen("membytes ");
uint32_t address = *((uint32_t*)(buf_ptr + skip));
skip += sizeof(uint32_t);
uint32_t len = *((uint32_t*)(buf_ptr + skip));
skip += sizeof(uint32_t);
if ( len != g_rem_ptr->msg.len - skip )
{
DPRINT_ERR(ERR, "Length does not match\n");
}
membytes_write( address, buf_ptr + skip, g_rem_ptr->msg.len - skip );
err = 0;
} else {
err = wl_ioctl(wl, g_rem_ptr->msg.cmd,
(void *)buf_ptr, g_rem_ptr->msg.len, TRUE);
DPRINT_INFO(OUTPUT, "SEND : cmd %d\t msg len %d\n",
g_rem_ptr->msg.cmd, g_rem_ptr->msg.len);
DPRINT_INFO(OUTPUT, "error code: %d\n", err);
}
}
#if defined(LINUX)
if (err == IOCTL_ERROR) {
DPRINT_ERR(ERR, "Error in executing wl_ioctl\n");
DPRINT_ERR(ERR, "Setting Default Interface1 \n");
set_interface(wl, old_intf_name);
}
if (g_rem_ptr->msg.flags & RDHD_SET_IOCTL) {
err = dhd_ioctl(wl, g_rem_ptr->msg.cmd,
(void *)buf_ptr, g_rem_ptr->msg.len, TRUE);
}
#endif /* LINUX */
#elif vxworks
if ((err = wl_ioctl_vx(wl, g_rem_ptr->msg.cmd, (void *)buf_ptr,
g_rem_ptr->msg.len)) != 0) {
DPRINT_ERR(ERR, "Error in executing wl_ioctl_vx\n");
}
if (err == IOCTL_ERROR) {
DPRINT_ERR(ERR, "Error in executing wl_ioctl\n");
DPRINT_ERR(ERR, "Setting Default Interface \n");
set_interface(wl, old_intf_name);
}
#elif WIN32
dwlen = g_rem_ptr->msg.len;
if (g_rem_ptr->msg.flags & RDHD_SET_IOCTL) {
g_rem_ptr->msg.cmd = g_rem_ptr->msg.cmd
- WL_OID_BASE + OID_DHD_IOCTLS;
}
err = (int)ir_setinformation(wl, g_rem_ptr->msg.cmd,
buf_ptr, &dwlen);
#endif /* LINUX TARGETOS_symbian MACOSX */
g_rem_ptr->msg.flags = REMOTE_SET_IOCTL;
} /* RDHD/REMOTE_SET_IOCTL */
if (g_rem_ptr->msg.flags & REMOTE_GET_IOCTL ||
g_rem_ptr->msg.flags & RDHD_GET_IOCTL) {
#if defined(LINUX) || defined(TARGETOS_symbian) || defined(TARGETOS_nucleus) || defined(MACOSX) || defined(TARGET_wiced)
if (g_rem_ptr->msg.cmd == WLC_GET_VAR && buf_ptr &&
strncmp((const char *)buf_ptr, "exit", g_rem_ptr->msg.len) == 0) {
/* exit command from remote client terminates server */
free(buf_ptr);
break;
}
#if defined( TARGET_wiced )
set_interface(wl, g_rem_ptr->intf_name);
#endif
if (g_rem_ptr->msg.flags & REMOTE_GET_IOCTL)
err = wl_ioctl(wl, g_rem_ptr->msg.cmd, (void *)buf_ptr,
g_rem_ptr->msg.len, FALSE);
#if defined (LINUX)
if (err == IOCTL_ERROR) {
DPRINT_ERR(ERR, "REMOTE_GET_IOCTL::Error in executing wl_ioctl\n");
DPRINT_ERR(ERR, "Setting Default Interface \n");
set_interface(wl, old_intf_name);
}
if (g_rem_ptr->msg.flags & RDHD_GET_IOCTL)
err = dhd_ioctl(wl, g_rem_ptr->msg.cmd, (void *)buf_ptr,
g_rem_ptr->msg.len, FALSE);
#endif /* LINUX */
#elif vxworks
if ((err = wl_ioctl_vx(wl, g_rem_ptr->msg.cmd, (void *)buf_ptr,
g_rem_ptr->msg.len)) != 0) {
DPRINT_ERR(ERR, "Error in executing wl_ioctl_vx\n");
}
if (err == IOCTL_ERROR) {
DPRINT_ERR(ERR, "Error in executing wl_ioctl_vx\n");
DPRINT_ERR(ERR, "Setting Default Interface \n");
set_interface(wl, old_intf_name);
}
#elif WIN32
if (g_rem_ptr->msg.cmd == (WL_OID_BASE + WLC_GET_VAR) &&
strncmp(buf_ptr, "exit", g_rem_ptr->msg.len) == 0) {
/* exit command from remote client terminates server */
if (buf_ptr) {
free(buf_ptr);
}
break;
}
dwlen = g_rem_ptr->msg.len;
if (g_rem_ptr->msg.flags & RDHD_GET_IOCTL) {
g_rem_ptr->msg.cmd = g_rem_ptr->msg.cmd -
WL_OID_BASE + OID_DHD_IOCTLS;
}
err = (int)ir_queryinformation(wl,
g_rem_ptr->msg.cmd, buf_ptr, &dwlen);
#endif /* defined(LINUX) || defined(TARGETOS_symbian) || defined(TARGETOS_nucleus) || defined(TARGET_wiced) */
g_rem_ptr->msg.flags = REMOTE_GET_IOCTL;
} /* REMOTE_GET_IOCTL */
DPRINT_INFO(OUTPUT, "RESP : cmd %d\t msg len %d\n",
g_rem_ptr->msg.cmd, g_rem_ptr->msg.len);
#if defined(LINUX) || defined(vxworks)
/* setting back default interface */
set_interface(wl, old_intf_name);
#endif /* defined(LINUX) || defined(vxworks) */
/* Transmit the response results */
if (remote_tx_response(wl, buf_ptr, err) < 0) {
DPRINT_ERR(ERR, "\nReturn results failed\n");
}
#ifdef RWL_SOCKET
if (g_rem_ptr->msg.flags != REMOTE_SHELL_CMD)
/* Transmitted to client. Then close the handle & get the new handle
* for next transmission & reception. In case of shell commands this
* should be closed in respective shellproc files.
*/
close_sock_handle(g_rwl_hndle);
#endif /* RWL_SOCKET */
if (buf_ptr) {
free(buf_ptr);
}
} /* end of while */
#if defined (RWL_SOCKET)
/* Close the main handle for socket */
close_sock_handle(transport_descriptor);
#elif defined(RWL_SERIAL)
/* Close the main handle for serial pipe */
rwl_close_pipe(remote_type, (void*)&transport_descriptor);
#endif
#ifdef RWLASD
wfa_dut_deinit();
#endif
return err;
}
int main(int argc, char **argv)
{
int status;
int i;
int debug = 0;
int long_preamble = 0;
int test = TEST_NONE;
DataRate rate_e = DATA_RATE_1M;
char *rate_s = "1Mbps";
char *interface_name = NULL;
DBG("argc=%u\n", argc);
if(argc < 2)
{
print_usage();
return -1;
}
interface_name = argv[1];
for(i=2;i<argc;i++)
{
if(str_comp(argv[i], "-ch:", 4))
{
channel = atoi(argv[i]+4);
if((channel > 14) || (channel < 1))
{
CON("Invalid channel: %u\n", channel);
return -1;
}
continue;
}
if(str_comp(argv[i], "-time:", 6))
{
time = atoi(argv[i]+6);
if((time > 24*3600) || (time < 1))
{
CON("Invalid time: %u\n", time);
return -1;
}
continue;
}
if(str_comp(argv[i], "-rate:", 6))
{
int rate = atoi(argv[i]+6);
switch(rate)
{
case 1:
case 1000:
rate_e = DATA_RATE_1M;
rate_s = "1Mbps";
break;
case 2:
case 2000:
rate_e = DATA_RATE_2M;
rate_s = "2Mbps";
break;
case 5500:
rate_e = DATA_RATE_5_5M;
rate_s = "5.5Mbps";
break;
//case 6: the user migh have writen "-rate:6.5"...
case 6000:
rate_e = DATA_RATE_6M;
rate_s = "6Mbps";
break;
case 6500:
rate_e = DATA_RATE_MCS0;
rate_s = "6.5Mbps (MCS0)";
break;
case 9:
case 9000:
rate_e = DATA_RATE_9M;
rate_s = "9Mbps";
break;
case 11:
case 11000:
rate_e = DATA_RATE_11M;
rate_s = "11Mbps";
break;
case 12:
case 12000:
rate_e = DATA_RATE_12M;
rate_s = "12Mbps";
break;
case 13:
case 13000:
rate_e = DATA_RATE_MCS1;
rate_s = "13Mbps (MSC1)";
break;
case 18:
case 18000:
rate_e = DATA_RATE_18M;
rate_s = "18Mbps";
break;
case 19500:
rate_e = DATA_RATE_MCS2;
rate_s = "19.5Mbps (MSC2)";
break;
case 22:
case 22000:
rate_e = DATA_RATE_22M;
rate_s = "22Mbps";
break;
case 24:
case 24000:
rate_e = DATA_RATE_24M;
rate_s = "24Mbps";
break;
case 26:
case 26000:
rate_e = DATA_RATE_MCS3;
rate_s = "26Mbps (MSC3)";
break;
case 33:
case 33000:
rate_e = DATA_RATE_33M;
rate_s = "33Mbps";
break;
case 36:
case 36000:
rate_e = DATA_RATE_36M;
rate_s = "36Mbps";
break;
case 39:
case 39000:
rate_e = DATA_RATE_MCS4;
rate_s = "39Mbps (MCS4)";
break;
case 48:
case 48000:
rate_e = DATA_RATE_48M;
rate_s = "48Mbps";
break;
case 52:
case 52000:
rate_e = DATA_RATE_MCS5;
rate_s = "52Mbps (MCS5)";
break;
case 54:
case 54000:
rate_e = DATA_RATE_54M;
rate_s = "54Mbps";
break;
case 58500:
rate_e = DATA_RATE_MCS6;
rate_s = "58.5Mbps (MCS6)";
break;
case 65:
case 65000:
rate_e = DATA_RATE_MCS7;
rate_s = "65Mbps (MSC7)";
break;
default:
CON("Invalid modulation rate %uKbps\n",rate);
return -1;
}
continue;
}
if(str_comp(argv[i], "-bi:", 4))
{
burst_interval = atoi(argv[i]+4);
if(burst_interval < 0)
{
CON("Invalid burst interval: %u\n", burst_interval);
return -1;
}
continue;
}
if(str_comp(argv[i], "-size:", 6))
{
packet_size = atoi(argv[i]+6);
if((packet_size < 0) || (packet_size > 1536))
{
CON("Invalid packet size: %u\n", packet_size);
return -1;
}
continue;
}
if(str_comp(argv[i], "-pwr:", 5))
{
output_power = atoi(argv[i]+5);
if((output_power < 0) || (output_power > 30))
{
CON("Invalid output power: %ddBm\n", output_power);
return -1;
}
continue;
}
if(str_comp(argv[i], "none", 4))
{
test = TEST_NONE;
continue;
}
if(str_comp(argv[i], "tx", 2))
{
test = TEST_TX;
continue;
}
if(str_comp(argv[i], "rx", 2))
{
test = TEST_RX;
continue;
}
if(str_comp(argv[i], "-lp", 3))
{
long_preamble = 1;
continue;
}
if(str_comp(argv[i], "-dbg", 4))
{
enable_debug();
continue;
}
CON("I do not understand argument \"%s\", ignoring\n", argv[i]);
}
status = set_interface(interface_name);
if(status)
{
CON("Could not set interface name\n");
CON(" Driver say:\"%s\"\n",GetErrorString());
return -1;
}
status = OpenDUT();
if(status)
{
CON("Could not open connection to Nanoradio WiFi-chip\n");
CON(" Driver say:\"%s\"\n",GetErrorString());
return -1;
}
status = SetLongPreamble(long_preamble);
if(status)
{
CON("Failed to set long preamble\n");
CON(" Driver say:\"%s\"\n",GetErrorString());
goto exit;
}
status = SetBurstInterval(burst_interval);
if(status)
{
CON("Failed to set burst interval\n");
CON(" Driver say:\"%s\"\n",GetErrorString());
goto exit;
}
status = SetChannel(channel);
if(status)
{
CON("Failed to write channel to Nanoradio WiFi-chip\n");
CON(" Driver say:\"%s\"\n",GetErrorString());
goto exit;
}
status = SetPayload(packet_size);
if(status)
{
CON("Failed to set packet size\n");
CON(" Driver say:\"%s\"\n",GetErrorString());
goto exit;
}
status = SetDataRate(rate_e);
if(status)
{
CON("Failed to write data rate to Nanoradio WiFi-chip\n");
CON(" Driver say:\"%s\"\n",GetErrorString());
goto exit;
}
switch(test)
{
case TEST_NONE:
break;
case TEST_TX:
{
status = TxGain(output_power);
if(status)
{
CON("Failed to set output power\n");
CON(" Driver say:\"%s\"\n",GetErrorString());
goto exit;
}
status = TxStartWithMod();
if(status)
{
CON("Failed to start TX\n");
CON(" Driver say:\"%s\"\n",GetErrorString());
goto exit;
}
else
{
CON("Sending frames continiously on channel %u with rate %s for %u seconds\n",channel,rate_s,time);
sleep(time);
status = TxStop();
if(status)
{
CON("Failed to stop TX\n");
CON(" Driver say:\"%s\"\n",GetErrorString());
goto exit;
}
}
}
break;
case TEST_RX:
{
status = RxStart();
if(status)
{
CON("Failed to start RX\n");
CON(" Driver say:\"%s\"\n",GetErrorString());
goto exit;
}
else
{
CON("Counting frames on channel %u with rate %s for %u seconds\n",channel,rate_s,time);
sleep(time);
status = RxStop();
if(status)
{
CON("Failed to stop RX\n");
CON(" Driver say:\"%s\"\n",GetErrorString());
goto exit;
}
else
{
CON("Good frames:%u\n", GetGoodFrame());
}
}
}
break;
}
exit:
CloseDUT();
return status;
}
int main() {
//###################################################################### //TODO get this from config file eventually
//host interface
my_host_mac_addr = 0x080027445566ull;
my_host_ip_addr = IP4_ADR_P2H(192,168,1,20);
my_host_mask = IP4_ADR_P2H(255,255,255,0);
//loopback interface
loopback_ip_addr = IP4_ADR_P2H(127,0,0,1);
loopback_mask = IP4_ADR_P2H(255,0,0,0);
//any
any_ip_addr = IP4_ADR_P2H(0,0,0,0);
//######################################################################
sem_init(&control_serial_sem, 0, 1); //TODO remove after gen_control_serial_num() converted to RNG
signal(SIGINT, termination_handler); //register termination handler
// Start the driving thread of each module
PRINT_DEBUG("Initialize Modules");
switch_init(); //should always be first
daemon_init(); //TODO improve how sets mac/ip
interface_init();
arp_init();
arp_register_interface(my_host_mac_addr, my_host_ip_addr);
ipv4_init();
set_interface(my_host_ip_addr, my_host_mask);
set_loopback(loopback_ip_addr, loopback_mask);
icmp_init();
tcp_init();
udp_init();
//rtm_init(); //TODO when updated/fully implemented
pthread_attr_t fins_pthread_attr;
pthread_attr_init(&fins_pthread_attr);
PRINT_DEBUG("Run/start Modules");
switch_run(&fins_pthread_attr);
daemon_run(&fins_pthread_attr);
interface_run(&fins_pthread_attr);
arp_run(&fins_pthread_attr);
ipv4_run(&fins_pthread_attr);
icmp_run(&fins_pthread_attr);
tcp_run(&fins_pthread_attr);
udp_run(&fins_pthread_attr);
//rtm_run(&fins_pthread_attr);
//############################# //TODO custom test, remove later
/*
if (0) {
char recv_data[4000];
while (1) {
gets(recv_data);
PRINT_DEBUG("Sending ARP req");
metadata *params_req = (metadata *) malloc(sizeof(metadata));
if (params_req == NULL) {
PRINT_ERROR("metadata alloc fail");
exit(-1);
}
metadata_create(params_req);
uint32_t dst_ip = IP4_ADR_P2H(192, 168, 1, 11);
//uint32_t dst_ip = IP4_ADR_P2H(172, 31, 50, 152);
uint32_t src_ip = IP4_ADR_P2H(192, 168, 1, 20);
//uint32_t src_ip = IP4_ADR_P2H(172, 31, 50, 160);
metadata_writeToElement(params_req, "dst_ip", &dst_ip, META_TYPE_INT32);
metadata_writeToElement(params_req, "src_ip", &src_ip, META_TYPE_INT32);
struct finsFrame *ff_req = (struct finsFrame*) malloc(sizeof(struct finsFrame));
if (ff_req == NULL) {
PRINT_ERROR("todo error");
//metadata_destroy(params_req);
exit(-1);
}
ff_req->dataOrCtrl = CONTROL;
ff_req->destinationID.id = ARP_ID;
ff_req->destinationID.next = NULL;
ff_req->metaData = params_req;
ff_req->ctrlFrame.senderID = IP_ID;
ff_req->ctrlFrame.serial_num = gen_control_serial_num();
ff_req->ctrlFrame.opcode = CTRL_EXEC;
ff_req->ctrlFrame.param_id = EXEC_ARP_GET_ADDR;
ff_req->ctrlFrame.data_len = 0;
ff_req->ctrlFrame.data = NULL;
arp_to_switch(ff_req); //doesn't matter which queue
}
}
//#############################
*/
while (1)
;
return (1);
}
void Pass::initialize() {
Module::initialize();
set_interface("Pass", 0);
}
void PipelinablePass::initialize() {
Pass::initialize();
set_interface("PipelinablePass", 0);
}
void FrontendPass::initialize() {
Module::initialize();
set_interface("FrontendPass", 0);
}
/**
* Submit a LinuxRequest.
* @param env The JNIEnv.
* @param fd The file descriptor.
* @param linuxRequest The LinuxRequest.
*/
static void submitRequest( JNIEnv *env, int fd, jobject linuxRequest )
{
int type, err, sync = 0;
jclass LinuxRequest;
jmethodID getType, setError, setCompleted;
LinuxRequest = (*env)->GetObjectClass( env, linuxRequest );
getType = (*env)->GetMethodID( env, LinuxRequest, "getType", "()I" );
setCompleted = (*env)->GetMethodID( env, LinuxRequest, "setCompleted", "(Z)V" );
setError = (*env)->GetMethodID( env, LinuxRequest, "setError", "(I)V" );
(*env)->DeleteLocalRef( env, LinuxRequest );
type = (*env)->CallIntMethod( env, linuxRequest, getType );
dbg(MSG_DEBUG1, "submitRequest : Submitting Request.\n");
switch (type) {
case LINUX_PIPE_REQUEST:
dbg(MSG_DEBUG1, "submitRequest : Submitting Pipe Request.\n");
err = pipe_request( env, fd, linuxRequest );
break;
case LINUX_DCP_REQUEST:
dbg(MSG_DEBUG1, "submitRequest : Submitting Dcp Request.\n");
err = dcp_request( env, fd, linuxRequest );
break;
case LINUX_SET_INTERFACE_REQUEST:
dbg(MSG_DEBUG1, "submitRequest : Submitting SetInterface Request.\n");
err = set_interface( env, fd, linuxRequest );
sync = 1;
break;
case LINUX_SET_CONFIGURATION_REQUEST:
dbg(MSG_DEBUG1, "submitRequest : Submitting SetConfiguration Request.\n");
err = set_configuration( env, fd, linuxRequest );
sync = 1;
break;
case LINUX_CLAIM_INTERFACE_REQUEST:
dbg(MSG_DEBUG1, "submitRequest : Submitting ClaimInterface Request.\n");
err = claim_interface( env, fd, 1, linuxRequest );
sync = 1;
break;
case LINUX_RELEASE_INTERFACE_REQUEST:
dbg(MSG_DEBUG1, "submitRequest : Submitting ReleaseInterface Request.\n");
err = claim_interface( env, fd, 0, linuxRequest );
sync = 1;
break;
case LINUX_IS_CLAIMED_INTERFACE_REQUEST:
dbg(MSG_DEBUG1, "submitRequest : Submitting IsClaimed Request.\n");
err = is_claimed( env, fd, linuxRequest );
sync = 1;
break;
case LINUX_ISOCHRONOUS_REQUEST:
dbg(MSG_DEBUG1, "submitRequest : Submitting Isochronous Request.\n");
err = isochronous_request( env, fd, linuxRequest );
break;
default: /* ? */
dbg( MSG_ERROR, "submitRequest : Unknown Request type %d\n", type );
err = -EINVAL;
break;
}
if (err)
(*env)->CallVoidMethod( env, linuxRequest, setError, err );
if (sync || err)
(*env)->CallVoidMethod( env, linuxRequest, setCompleted, JNI_TRUE );
}
Menu::Menu(QString name, bool is_training, QWidget* parent) : QWidget(parent) {
this -> is_training = is_training;
this -> name = name;
set_interface();
}