Пример #1
0
void
audio_init()
{
  unsigned int buffer_time = 50000;
  const char* device;
  int err;

  if(audio_initialised)
    return;

  audio_initialised = 1;

  device = getenv("ALSA_DEVICE");

  if(!device)
    device = "default";

  if(0 > (err = snd_pcm_open(&playback_handle, device,
                             SND_PCM_STREAM_PLAYBACK, 0/*SND_PCM_NONBLOCK*/)))
    errx(EXIT_FAILURE, "Audio: Cannot open device %s: %s", device, snd_strerror(err));

  if(0 > (err = snd_pcm_sw_params_malloc(&sw_params)))
    errx(EXIT_FAILURE, "Audio: Could not allocate software parameter structure: %s",
         snd_strerror(err));

  if(0 > (err = snd_pcm_hw_params_malloc(&hw_params)))
    errx(EXIT_FAILURE, "Audio: Could not allocate hardware parameter structure: %s",
         snd_strerror(err));

  if(0 > (err = snd_pcm_hw_params_any(playback_handle, hw_params)))
    errx(EXIT_FAILURE, "Audio: Could not initializa hardware parameters: %s",
         snd_strerror(err));

  if(0 > (err = snd_pcm_hw_params_set_access(playback_handle, hw_params,
                                             SND_PCM_ACCESS_RW_INTERLEAVED)))
    errx(EXIT_FAILURE, "Audio: Could not set access type: %s", snd_strerror(err));

  if(0 > (err = snd_pcm_hw_params_set_format(playback_handle, hw_params,
                                             SND_PCM_FORMAT_S16)))
    errx(EXIT_FAILURE, "Audio: Could not set sample format to signed 16 bit "
         "native endian: %s", snd_strerror(err));

  if(0 > (err = snd_pcm_hw_params_set_rate_near(playback_handle, hw_params,
                                                &rate, 0)))
    errx(EXIT_FAILURE, "Audio: Could not set sample rate %uHz: %s", rate,
         snd_strerror(err));

  if(0 > (err = snd_pcm_hw_params_set_channels(playback_handle, hw_params, 2)))
    errx(EXIT_FAILURE, "Audio: Could not set channel count to %u: %s",
         2, snd_strerror(err));

  snd_pcm_hw_params_set_buffer_time_near(playback_handle, hw_params, &buffer_time, 0);

  if(0 > (err = snd_pcm_hw_params(playback_handle, hw_params)))
    errx(EXIT_FAILURE, "Audio: Could not set hardware parameters: %s", snd_strerror(err));

  fprintf(stderr, "Buffer time is %.3f seconds\n", buffer_time / 1.0e6);

  if(0 > (err = snd_pcm_sw_params_current(playback_handle, sw_params)))
    errx(EXIT_FAILURE, "Audio: Could not initialise software parameters: %s",
         snd_strerror(err));

  snd_pcm_sw_params_set_start_threshold(playback_handle, sw_params, 0);
  snd_pcm_sw_params_set_avail_min(playback_handle, sw_params, 1024);

  snd_pcm_uframes_t min;
  snd_pcm_sw_params_get_avail_min(sw_params, &min);
  fprintf(stderr, "Minimum %u\n", (unsigned) min);

  if(0 > (err = snd_pcm_sw_params(playback_handle, sw_params)))
    errx(EXIT_FAILURE, "Audio: Could not set software parameters: %s",
        snd_strerror(err));

  buffer_size = snd_pcm_avail_update(playback_handle);
}
Пример #2
0
int initAlsa(char **argv,int optind)
{
    snd_pcm_hw_params_t *hw_params;
    int err,n;
    unsigned int Fs;

    if ((err = snd_pcm_open(&capture_handle, argv[optind],
                            SND_PCM_STREAM_CAPTURE, 0)) < 0) {
        fprintf(stderr, "Alsa cannot open audio device %s (%s)\n",argv[optind], snd_strerror(err));
        return 1;
    }

    if ((err = snd_pcm_hw_params_malloc(&hw_params)) < 0) {
        fprintf(stderr,
                "Alsa cannot allocate hardware parameter structure (%s)\n",snd_strerror(err));
        return 1;
    }

    if ((err = snd_pcm_hw_params_any(capture_handle, hw_params)) < 0) {
        fprintf(stderr,
                "Alsa cannot initialize hardware parameter structure (%s)\n",snd_strerror(err));
        return 1;
    }

    if ((err = snd_pcm_hw_params_set_access(capture_handle, hw_params,SND_PCM_ACCESS_RW_INTERLEAVED)) < 0) {
        fprintf(stderr, "Alsa cannot set access type (%s)\n",snd_strerror(err));
        return 1;
    }

    if ((err = snd_pcm_hw_params_set_format(capture_handle, hw_params,SND_PCM_FORMAT_S16)) < 0) {
        fprintf(stderr, "Alsa cannot set sample format (%s)\n",snd_strerror(err));
        return 1;
    }

    snd_pcm_hw_params_set_rate_resample(capture_handle, hw_params,0);
    Fs=19200;
    n=1;
    if ((err = snd_pcm_hw_params_set_rate_near(capture_handle, hw_params, &Fs,&n)) < 0) {
        fprintf(stderr, "Alsa cannot set sample rate (%s)\n",snd_strerror(err));
        return 1;
    }
    fprintf(stderr, "Alsa sample rate %d\n",Fs);

    if(snd_pcm_hw_params_get_channels (hw_params, &nbch)!=0) {
        fprintf(stderr, "Alsa cannot get number of channels\n");
        return 1;
    }
    if(nbch>4) {
        fprintf(stderr, "Alsa too much channels\n");
        return 1;

    }
    if ((err = snd_pcm_hw_params(capture_handle, hw_params)) < 0) {
        fprintf(stderr, "Alsa cannot set parameters (%s)\n",snd_strerror(err));
        return 1;
    }
    snd_pcm_hw_params_free(hw_params);

    if ((err = snd_pcm_prepare(capture_handle)) < 0) {
        fprintf(stderr,
                "Alsa cannot prepare audio interface for use (%s)\n",snd_strerror(err));
        return 1;
    }

    for(n=0; n<nbch; n++) {
        channel[n].chn=n;
        channel[n].Infs=Fs;
        channel[n].InBuff=malloc(MAXNBFRAMES*sizeof(sample_t));
    }
    for(; n<MAXNBCHANNELS; n++) channel[n].Infs=0;

    return (0);
}
Пример #3
0
bool OutputALSA::initialize(quint32 freq, ChannelMap map, Qmmp::AudioFormat format)
{
    m_inited = false;

    if (pcm_handle)
        return false;

    if (snd_pcm_open(&pcm_handle, pcm_name, SND_PCM_STREAM_PLAYBACK, SND_PCM_NONBLOCK) < 0)
    {
        qWarning ("OutputALSA: Error opening PCM device %s", pcm_name);
        return false;
    }

    // we need to configure

    uint rate = freq; /* Sample rate */
    uint exact_rate = freq;   /* Sample rate returned by */

    /* load settings from config */
    QSettings settings(Qmmp::configFile(), QSettings::IniFormat);
    settings.beginGroup("ALSA");
    uint buffer_time = settings.value("buffer_time",500).toUInt()*1000;
    uint period_time = settings.value("period_time",100).toUInt()*1000;
    bool use_pause =  settings.value("use_snd_pcm_pause", false).toBool();
    settings.endGroup();

    snd_pcm_hw_params_t *hwparams = 0;
    snd_pcm_sw_params_t *swparams = 0;
    int err; //alsa error code

    //hw params
    snd_pcm_hw_params_alloca(&hwparams);
    if ((err = snd_pcm_hw_params_any(pcm_handle, hwparams)) < 0)
    {
        qWarning("OutputALSA: Can not read configuration for PCM device: %s", snd_strerror(err));
        return false;
    }
    if (m_use_mmap)
    {
        if ((err = snd_pcm_hw_params_set_access(pcm_handle, hwparams, SND_PCM_ACCESS_MMAP_INTERLEAVED)) < 0)
        {
            qWarning("OutputALSA: Error setting mmap access: %s", snd_strerror(err));
            m_use_mmap = false;
        }
    }
    if (!m_use_mmap)
    {
        if ((err = snd_pcm_hw_params_set_access(pcm_handle, hwparams, SND_PCM_ACCESS_RW_INTERLEAVED)) < 0)
        {
            qWarning("OutputALSA: Error setting access: %s", snd_strerror(err));
            return false;
        }
    }
    snd_pcm_format_t alsa_format = SND_PCM_FORMAT_UNKNOWN;
    switch (format)
    {
    case Qmmp::PCM_S8:
        alsa_format = SND_PCM_FORMAT_S8;
        break;
    case Qmmp::PCM_S16LE:
        alsa_format = SND_PCM_FORMAT_S16_LE;
        break;
    case Qmmp::PCM_S24LE:
        alsa_format = SND_PCM_FORMAT_S24_LE;
        break;
    case Qmmp::PCM_S32LE:
        alsa_format = SND_PCM_FORMAT_S32_LE;
        break;
    default:
        qWarning("OutputALSA: unsupported format detected");
        return false;
    }
    if ((err = snd_pcm_hw_params_set_format(pcm_handle, hwparams, alsa_format)) < 0)
    {
        qDebug("OutputALSA: Error setting format: %s", snd_strerror(err));
        return false;
    }
    exact_rate = rate;

    if ((err = snd_pcm_hw_params_set_rate_near(pcm_handle, hwparams, &exact_rate, 0)) < 0)
    {
        qWarning("OutputALSA: Error setting rate: %s", snd_strerror(err));
        return false;
    }
    if (rate != exact_rate)
    {
        qWarning("OutputALSA: The rate %d Hz is not supported by your hardware.\n==> Using %d Hz instead.", rate, exact_rate);
        rate = exact_rate;
    }
    uint c = map.count();
    if ((err = snd_pcm_hw_params_set_channels_near(pcm_handle, hwparams, &c)) < 0)
    {
        qWarning("OutputALSA: Error setting channels: %s", snd_strerror(err));
        return false;
    }
    if (c != (uint)map.count())
    {
        qWarning("OutputALSA: The channel number %d is not supported by your hardware", map.count());
        qWarning("==> Using %d instead.", c);
    }
    if ((err = snd_pcm_hw_params_set_period_time_near(pcm_handle, hwparams, &period_time ,0)) < 0)
    {
        qWarning("OutputALSA: Error setting period time: %s", snd_strerror(err));
        return false;
    }
    if ((err = snd_pcm_hw_params_set_buffer_time_near(pcm_handle, hwparams, &buffer_time ,0)) < 0)
    {
        qWarning("OutputALSA: Error setting buffer time: %s", snd_strerror(err));
        return false;
    }
    if ((err = snd_pcm_hw_params(pcm_handle, hwparams)) < 0)
    {
        qWarning("OutputALSA: Error setting HW params: %s", snd_strerror(err));
        return false;
    }
    //read some alsa parameters
    snd_pcm_uframes_t buffer_size = 0;
    snd_pcm_uframes_t period_size = 0;
    if ((err = snd_pcm_hw_params_get_buffer_size(hwparams, &buffer_size)) < 0)
    {
        qWarning("OutputALSA: Error reading buffer size: %s", snd_strerror(err));
        return false;
    }
    if ((err = snd_pcm_hw_params_get_period_size(hwparams, &period_size, 0)) < 0)
    {
        qWarning("OutputALSA: Error reading period size: %s", snd_strerror(err));
        return false;
    }
    //swparams
    snd_pcm_sw_params_alloca(&swparams);
    snd_pcm_sw_params_current(pcm_handle, swparams);
    if ((err = snd_pcm_sw_params_set_start_threshold(pcm_handle, swparams,
               buffer_size - period_size)) < 0)
        qWarning("OutputALSA: Error setting threshold: %s", snd_strerror(err));
    if ((err = snd_pcm_sw_params(pcm_handle, swparams)) < 0)
    {
        qWarning("OutputALSA: Error setting SW params: %s", snd_strerror(err));
        return false;
    }
    //setup needed values
    m_chunk_size = period_size;
    m_can_pause = snd_pcm_hw_params_can_pause(hwparams) && use_pause;
    qDebug("OutputALSA: can pause: %d", m_can_pause);

    ChannelMap out_map = map;
#if (SND_LIB_VERSION >= 0x01001B)
    //channel map configuration
    snd_pcm_chmap_t *chmap = snd_pcm_get_chmap(pcm_handle);
    if(chmap)
    {
        out_map.clear();
        char tmp[256];
        memset(tmp,0,256);
        snd_pcm_chmap_print(chmap, 256, tmp);
        qDebug("OutputALSA: received channel map: %s",tmp);

        for(uint i = 0; i < chmap->channels; ++i)
        {
            if(m_alsa_channels.keys().contains(chmap->pos[i]))
                out_map.append(m_alsa_channels.value(chmap->pos[i]));
            else
                out_map.append(Qmmp::CHAN_NULL);
        }
        free(chmap);
    }
    else
        qWarning("OutputALSA: Unable to receive current channel map");
#endif
    configure(exact_rate, out_map, format); //apply configuration
    //create alsa prebuffer;
    m_prebuf_size = 2 * snd_pcm_frames_to_bytes(pcm_handle, m_chunk_size); //buffer for two periods
    m_prebuf = (uchar *)malloc(m_prebuf_size);
    m_inited = true;
    return true;
}
Пример #4
0
int main(int argc, char *argv[]) {
    const char *dev;
    int r, cap, count = 0;
    snd_pcm_hw_params_t *hwparams;
    snd_pcm_sw_params_t *swparams;
    snd_pcm_status_t *status;
    snd_pcm_t *pcm;
    unsigned rate = SAMPLE_RATE;
    unsigned periods = 2;
    snd_pcm_uframes_t boundary, buffer_size = SAMPLE_RATE/10; /* 100s */
    int dir = 1;
    int fillrate;
    struct timespec start, last_timestamp = { 0, 0 };
    uint64_t start_us, last_us = 0;
    snd_pcm_sframes_t last_avail = 0, last_delay = 0;
    struct pollfd *pollfds;
    int n_pollfd;
    int64_t sample_count = 0;
    uint16_t *samples;
    struct sched_param sp;

    r = -1;
#ifdef _POSIX_PRIORITY_SCHEDULING
    sp.sched_priority = 5;
    r = pthread_setschedparam(pthread_self(), SCHED_RR, &sp);
#endif
    if (r)
        printf("Could not get RT prio. :(\n");

    snd_pcm_hw_params_alloca(&hwparams);
    snd_pcm_sw_params_alloca(&swparams);
    snd_pcm_status_alloca(&status);

    r = clock_gettime(CLOCK_MONOTONIC, &start);
    assert(r == 0);

    start_us = timespec_us(&start);

    dev = argc > 1 ? argv[1] : "front:0";
    cap = argc > 2 ? atoi(argv[2]) : 0;
    fillrate = argc > 3 ? atoi(argv[3]) : 1;

    samples = calloc(fillrate, CHANNELS*sizeof(uint16_t));
    assert(samples);

    if (cap == 0)
      r = snd_pcm_open(&pcm, dev, SND_PCM_STREAM_PLAYBACK, 0);
    else
      r = snd_pcm_open(&pcm, dev, SND_PCM_STREAM_CAPTURE, 0);
    assert(r == 0);

    r = snd_pcm_hw_params_any(pcm, hwparams);
    assert(r == 0);

    r = snd_pcm_hw_params_set_rate_resample(pcm, hwparams, 0);
    assert(r == 0);

    r = snd_pcm_hw_params_set_access(pcm, hwparams, SND_PCM_ACCESS_RW_INTERLEAVED);
    assert(r == 0);

    r = snd_pcm_hw_params_set_format(pcm, hwparams, SND_PCM_FORMAT_S16_LE);
    assert(r == 0);

    r = snd_pcm_hw_params_set_rate_near(pcm, hwparams, &rate, NULL);
    assert(r == 0);

    r = snd_pcm_hw_params_set_channels(pcm, hwparams, CHANNELS);
    assert(r == 0);

    r = snd_pcm_hw_params_set_periods_integer(pcm, hwparams);
    assert(r == 0);

    r = snd_pcm_hw_params_set_periods_near(pcm, hwparams, &periods, &dir);
    assert(r == 0);

    r = snd_pcm_hw_params_set_buffer_size_near(pcm, hwparams, &buffer_size);
    assert(r == 0);

    r = snd_pcm_hw_params(pcm, hwparams);
    assert(r == 0);

    r = snd_pcm_hw_params_current(pcm, hwparams);
    assert(r == 0);

    r = snd_pcm_sw_params_current(pcm, swparams);
    assert(r == 0);

    if (cap == 0)
      r = snd_pcm_sw_params_set_avail_min(pcm, swparams, 1);
    else
      r = snd_pcm_sw_params_set_avail_min(pcm, swparams, 0);
    assert(r == 0);

    r = snd_pcm_sw_params_set_period_event(pcm, swparams, 0);
    assert(r == 0);

    r = snd_pcm_hw_params_get_buffer_size(hwparams, &buffer_size);
    assert(r == 0);
    r = snd_pcm_sw_params_set_start_threshold(pcm, swparams, buffer_size - (buffer_size % fillrate));
    assert(r == 0);

    r = snd_pcm_sw_params_get_boundary(swparams, &boundary);
    assert(r == 0);
    r = snd_pcm_sw_params_set_stop_threshold(pcm, swparams, boundary);
    assert(r == 0);

    r = snd_pcm_sw_params_set_tstamp_mode(pcm, swparams, SND_PCM_TSTAMP_ENABLE);
    assert(r == 0);

    r = snd_pcm_sw_params(pcm, swparams);
    assert(r == 0);

    r = snd_pcm_prepare(pcm);
    assert(r == 0);

    r = snd_pcm_sw_params_current(pcm, swparams);
    assert(r == 0);

/*     assert(snd_pcm_hw_params_is_monotonic(hwparams) > 0); */

    n_pollfd = snd_pcm_poll_descriptors_count(pcm);
    assert(n_pollfd > 0);

    pollfds = malloc(sizeof(struct pollfd) * n_pollfd);
    assert(pollfds);

    r = snd_pcm_poll_descriptors(pcm, pollfds, n_pollfd);
    assert(r == n_pollfd);

    printf("Starting. Buffer size is %u frames\n", (unsigned int) buffer_size);

    if (cap) {
      r = snd_pcm_start(pcm);
      assert(r == 0);
    }

    for (;;) {
        snd_pcm_sframes_t avail, delay;
        struct timespec now, timestamp;
        unsigned short revents;
        int handled = 0;
        uint64_t now_us, timestamp_us;
        snd_pcm_state_t state;
        unsigned long long pos;

        r = poll(pollfds, n_pollfd, 0);
        assert(r >= 0);

        r = snd_pcm_poll_descriptors_revents(pcm, pollfds, n_pollfd, &revents);
        assert(r == 0);

        if (cap == 0)
          assert((revents & ~POLLOUT) == 0);
        else
          assert((revents & ~POLLIN) == 0);

        avail = snd_pcm_avail(pcm);
        assert(avail >= 0);

        r = snd_pcm_status(pcm, status);
        assert(r == 0);

        /* This assertion fails from time to time. ALSA seems to be broken */
/*         assert(avail == (snd_pcm_sframes_t) snd_pcm_status_get_avail(status)); */
/*         printf("%lu %lu\n", (unsigned long) avail, (unsigned long) snd_pcm_status_get_avail(status)); */

        snd_pcm_status_get_htstamp(status, &timestamp);
        delay = snd_pcm_status_get_delay(status);
        state = snd_pcm_status_get_state(status);

        r = clock_gettime(CLOCK_MONOTONIC, &now);
        assert(r == 0);

        assert(!revents || avail > 0);

        if ((!cap && (avail >= fillrate)) || (cap && (unsigned)avail >= buffer_size)) {
            snd_pcm_sframes_t sframes;

            if (cap == 0)
              sframes = snd_pcm_writei(pcm, samples, fillrate);
            else
              sframes = snd_pcm_readi(pcm, samples, fillrate);
            assert(sframes == fillrate);

            handled = fillrate;
            sample_count += fillrate;
        }

        if (!handled &&
            memcmp(&timestamp, &last_timestamp, sizeof(timestamp)) == 0 &&
            avail == last_avail &&
            delay == last_delay) {
            /* This is boring */
            continue;
        }

        now_us = timespec_us(&now);
        timestamp_us = timespec_us(&timestamp);

        if (cap == 0)
            pos = (unsigned long long) ((sample_count - handled - delay) * 1000000LU / SAMPLE_RATE);
        else
            pos = (unsigned long long) ((sample_count - handled + delay) * 1000000LU / SAMPLE_RATE);

        if (count++ % 50 == 0)
            printf("Elapsed\tCPU\tALSA\tPos\tSamples\tavail\tdelay\trevents\thandled\tstate\n");

        printf("%llu\t%llu\t%llu\t%llu\t%llu\t%li\t%li\t%i\t%i\t%i\n",
               (unsigned long long) (now_us - last_us),
               (unsigned long long) (now_us - start_us),
               (unsigned long long) (timestamp_us ? timestamp_us - start_us : 0),
               pos,
               (unsigned long long) sample_count,
               (signed long) avail,
               (signed long) delay,
               revents,
               handled,
               state);

        if (cap == 0)
          /** When this assert is hit, most likely something bad
           * happened, i.e. the avail jumped suddenly. */
          assert((unsigned) avail <= buffer_size);

        last_avail = avail;
        last_delay = delay;
        last_timestamp = timestamp;
        last_us = now_us;
    }

    return 0;
}
Пример #5
0
static void
alsa_configure (struct sound_device *sd)
{
  int val, err, dir;
  unsigned uval;
  struct alsa_params *p = (struct alsa_params *) sd->data;
  snd_pcm_uframes_t buffer_size;

  eassert (p->handle != 0);

  err = snd_pcm_hw_params_malloc (&p->hwparams);
  if (err < 0)
    alsa_sound_perror ("Could not allocate hardware parameter structure", err);

  err = snd_pcm_sw_params_malloc (&p->swparams);
  if (err < 0)
    alsa_sound_perror ("Could not allocate software parameter structure", err);

  err = snd_pcm_hw_params_any (p->handle, p->hwparams);
  if (err < 0)
    alsa_sound_perror ("Could not initialize hardware parameter structure", err);

  err = snd_pcm_hw_params_set_access (p->handle, p->hwparams,
                                      SND_PCM_ACCESS_RW_INTERLEAVED);
  if (err < 0)
    alsa_sound_perror ("Could not set access type", err);

  val = sd->format;
  err = snd_pcm_hw_params_set_format (p->handle, p->hwparams, val);
  if (err < 0)
    alsa_sound_perror ("Could not set sound format", err);

  uval = sd->sample_rate;
  err = snd_pcm_hw_params_set_rate_near (p->handle, p->hwparams, &uval, 0);
  if (err < 0)
    alsa_sound_perror ("Could not set sample rate", err);

  val = sd->channels;
  err = snd_pcm_hw_params_set_channels (p->handle, p->hwparams, val);
  if (err < 0)
    alsa_sound_perror ("Could not set channel count", err);

  err = snd_pcm_hw_params (p->handle, p->hwparams);
  if (err < 0)
    alsa_sound_perror ("Could not set parameters", err);


  err = snd_pcm_hw_params_get_period_size (p->hwparams, &p->period_size, &dir);
  if (err < 0)
    alsa_sound_perror ("Unable to get period size for playback", err);

  err = snd_pcm_hw_params_get_buffer_size (p->hwparams, &buffer_size);
  if (err < 0)
    alsa_sound_perror ("Unable to get buffer size for playback", err);

  err = snd_pcm_sw_params_current (p->handle, p->swparams);
  if (err < 0)
    alsa_sound_perror ("Unable to determine current swparams for playback",
                       err);

  /* Start the transfer when the buffer is almost full */
  err = snd_pcm_sw_params_set_start_threshold (p->handle, p->swparams,
                                               (buffer_size / p->period_size)
                                               * p->period_size);
  if (err < 0)
    alsa_sound_perror ("Unable to set start threshold mode for playback", err);

  /* Allow the transfer when at least period_size samples can be processed */
  err = snd_pcm_sw_params_set_avail_min (p->handle, p->swparams, p->period_size);
  if (err < 0)
    alsa_sound_perror ("Unable to set avail min for playback", err);

  err = snd_pcm_sw_params (p->handle, p->swparams);
  if (err < 0)
    alsa_sound_perror ("Unable to set sw params for playback\n", err);

  snd_pcm_hw_params_free (p->hwparams);
  p->hwparams = NULL;
  snd_pcm_sw_params_free (p->swparams);
  p->swparams = NULL;

  err = snd_pcm_prepare (p->handle);
  if (err < 0)
    alsa_sound_perror ("Could not prepare audio interface for use", err);

  if (sd->volume > 0)
    {
      int chn;
      snd_mixer_t *handle;
      snd_mixer_elem_t *e;
      if (snd_mixer_open (&handle, 0) >= 0)
        {
	  char const *file = string_default (sd->file,
					     DEFAULT_ALSA_SOUND_DEVICE);
          if (snd_mixer_attach (handle, file) >= 0
              && snd_mixer_load (handle) >= 0
              && snd_mixer_selem_register (handle, NULL, NULL) >= 0)
            for (e = snd_mixer_first_elem (handle);
                 e;
                 e = snd_mixer_elem_next (e))
              {
                if (snd_mixer_selem_has_playback_volume (e))
                  {
                    long pmin, pmax, vol;
                    snd_mixer_selem_get_playback_volume_range (e, &pmin, &pmax);
                    vol = pmin + (sd->volume * (pmax - pmin)) / 100;

                    for (chn = 0; chn <= SND_MIXER_SCHN_LAST; chn++)
                      snd_mixer_selem_set_playback_volume (e, chn, vol);
                  }
              }
          snd_mixer_close (handle);
        }
    }
}
Пример #6
0
void *data_streaming(void *socket_desc)
{
  int rc;
  snd_pcm_t *handle;
  snd_pcm_hw_params_t *params;
  unsigned int val;
  int dir;
  snd_pcm_uframes_t frames;
  int i;

  /* Open PCM device for recording (capture). */
  rc = snd_pcm_open(&handle, "plughw:1,0",
                    SND_PCM_STREAM_CAPTURE, 0);
  if (rc < 0) {
    fprintf(stderr,
            "unable to open pcm device: %s\n",
            snd_strerror(rc));
    exit(1);
  }

  /* Allocate a hardware parameters object. */
  snd_pcm_hw_params_alloca(&params);

  /* Fill it in with default values. */
  snd_pcm_hw_params_any(handle, params);

  /* Set the desired hardware parameters. */

  /* Interleaved mode */
  snd_pcm_hw_params_set_access(handle, params,
                      SND_PCM_ACCESS_RW_INTERLEAVED);

  /* Signed 16-bit little-endian format */

  /* Signed 16-bit little-endian format */
  snd_pcm_hw_params_set_format(handle, params,
                              SND_PCM_FORMAT_U8);

  /* Two channels (stereo) */
  snd_pcm_hw_params_set_channels(handle, params, 1);

  /* 44100 bits/second sampling rate (CD quality) */
  val = 32768;
  snd_pcm_hw_params_set_rate_near(handle, params,
                                  &val, &dir);

  /* Set period size to 32 frames. */
  frames = SIZE;
  snd_pcm_hw_params_set_period_size_near(handle,
                              params, &frames, &dir);

  /* Write the parameters to the driver */
  rc = snd_pcm_hw_params(handle, params);
  if (rc < 0) {
    fprintf(stderr,
            "unable to set hw parameters: %s\n",
            snd_strerror(rc));
    exit(1);
  }

  /* Use a buffer large enough to hold one period */
  snd_pcm_hw_params_get_period_size(params,
                                      &frames, &dir);
 /* 2 bytes/sample, 2 channels */

  /* We want to loop for 5 seconds */
  snd_pcm_hw_params_get_period_time(params,
                                         &val, &dir);
  
  while (1) {
        pthread_mutex_lock(&mutex);
        rc = snd_pcm_readi(handle, buffer, frames);
        pthread_kill(tid, SIGUSR1);
        pthread_mutex_unlock(&mutex);

    if (rc == -EPIPE) {
      /* EPIPE means overrun */
      fprintf(stderr, "overrun occurred\n");
      snd_pcm_prepare(handle);
    } else if (rc < 0) {
      fprintf(stderr,"error from read: %s\n",snd_strerror(rc));
    } else if (rc != (int)frames) {
      fprintf(stderr, "short read, read %d frames\n", rc);
    }
   }

  snd_pcm_drain(handle);
  snd_pcm_close(handle);
  free(buffer);

    return 0;
}
Пример #7
0
/**************************************************************************
 * 				widOpen				[internal]
 */
static DWORD widOpen(WORD wDevID, LPWAVEOPENDESC lpDesc, DWORD dwFlags)
{
    WINE_WAVEDEV*	        wwi;
    snd_pcm_hw_params_t *       hw_params;
    snd_pcm_sw_params_t *       sw_params;
    snd_pcm_access_t            access;
    snd_pcm_format_t            format;
    unsigned int                rate;
    unsigned int                buffer_time = 500000;
    unsigned int                period_time = 10000;
    snd_pcm_uframes_t           buffer_size;
    snd_pcm_uframes_t           period_size;
    int                         flags;
    snd_pcm_t *                 pcm;
    int                         err;
    int                         dir;
    DWORD                       ret;

    /* JPW TODO - review this code */
    TRACE("(%u, %p, %08X);\n", wDevID, lpDesc, dwFlags);
    if (lpDesc == NULL) {
	WARN("Invalid Parameter !\n");
	return MMSYSERR_INVALPARAM;
    }
    if (wDevID >= ALSA_WidNumDevs) {
	TRACE("Requested device %d, but only %d are known!\n", wDevID, ALSA_WidNumDevs);
	return MMSYSERR_BADDEVICEID;
    }

    /* only PCM format is supported so far... */
    if (!ALSA_supportedFormat(lpDesc->lpFormat)) {
	WARN("Bad format: tag=%04X nChannels=%d nSamplesPerSec=%d !\n",
	     lpDesc->lpFormat->wFormatTag, lpDesc->lpFormat->nChannels,
	     lpDesc->lpFormat->nSamplesPerSec);
	return WAVERR_BADFORMAT;
    }

    if (dwFlags & WAVE_FORMAT_QUERY) {
	TRACE("Query format: tag=%04X nChannels=%d nSamplesPerSec=%d !\n",
	     lpDesc->lpFormat->wFormatTag, lpDesc->lpFormat->nChannels,
	     lpDesc->lpFormat->nSamplesPerSec);
	return MMSYSERR_NOERROR;
    }

    wwi = &WInDev[wDevID];

    if (wwi->pcm != NULL) {
        WARN("already allocated\n");
        return MMSYSERR_ALLOCATED;
    }

    wwi->pcm = 0;
    flags = SND_PCM_NONBLOCK;

    if ( (err=snd_pcm_open(&pcm, wwi->pcmname, SND_PCM_STREAM_CAPTURE, flags)) < 0 )
    {
        ERR("Error open: %s\n", snd_strerror(err));
	return MMSYSERR_NOTENABLED;
    }

    wwi->wFlags = HIWORD(dwFlags & CALLBACK_TYPEMASK);

    wwi->waveDesc = *lpDesc;
    ALSA_copyFormat(lpDesc->lpFormat, &wwi->format);

    if (wwi->format.Format.wBitsPerSample == 0) {
	WARN("Resetting zeroed wBitsPerSample\n");
	wwi->format.Format.wBitsPerSample = 8 *
	    (wwi->format.Format.nAvgBytesPerSec /
	     wwi->format.Format.nSamplesPerSec) /
	    wwi->format.Format.nChannels;
    }

    hw_params = HeapAlloc( GetProcessHeap(), HEAP_ZERO_MEMORY, snd_pcm_hw_params_sizeof() );
    sw_params = HeapAlloc( GetProcessHeap(), HEAP_ZERO_MEMORY, snd_pcm_sw_params_sizeof() );

    snd_pcm_hw_params_any(pcm, hw_params);

#define EXIT_ON_ERROR(f,e,txt) do \
{ \
    int err; \
    if ( (err = (f) ) < 0) \
    { \
	WARN(txt ": %s\n", snd_strerror(err)); \
	ret = (e); \
        goto error; \
    } \
} while(0)

    access = SND_PCM_ACCESS_MMAP_INTERLEAVED;
    if ( ( err = snd_pcm_hw_params_set_access(pcm, hw_params, access ) ) < 0) {
        WARN("mmap not available. switching to standard write.\n");
        access = SND_PCM_ACCESS_RW_INTERLEAVED;
	EXIT_ON_ERROR( snd_pcm_hw_params_set_access(pcm, hw_params, access ), MMSYSERR_INVALPARAM, "unable to set access for playback");
	wwi->read = snd_pcm_readi;
    }
    else
	wwi->read = snd_pcm_mmap_readi;

    EXIT_ON_ERROR( snd_pcm_hw_params_set_channels(pcm, hw_params, wwi->format.Format.nChannels), WAVERR_BADFORMAT, "unable to set required channels");

    if ((wwi->format.Format.wFormatTag == WAVE_FORMAT_PCM) ||
        ((wwi->format.Format.wFormatTag == WAVE_FORMAT_EXTENSIBLE) &&
        IsEqualGUID(&wwi->format.SubFormat, &KSDATAFORMAT_SUBTYPE_PCM))) {
        format = (wwi->format.Format.wBitsPerSample == 8) ? SND_PCM_FORMAT_U8 :
                 (wwi->format.Format.wBitsPerSample == 16) ? SND_PCM_FORMAT_S16_LE :
                 (wwi->format.Format.wBitsPerSample == 24) ? SND_PCM_FORMAT_S24_3LE :
                 (wwi->format.Format.wBitsPerSample == 32) ? SND_PCM_FORMAT_S32_LE : -1;
    } else if ((wwi->format.Format.wFormatTag == WAVE_FORMAT_EXTENSIBLE) &&
        IsEqualGUID(&wwi->format.SubFormat, &KSDATAFORMAT_SUBTYPE_IEEE_FLOAT)){
        format = (wwi->format.Format.wBitsPerSample == 32) ? SND_PCM_FORMAT_FLOAT_LE : -1;
    } else if (wwi->format.Format.wFormatTag == WAVE_FORMAT_MULAW) {
        FIXME("unimplemented format: WAVE_FORMAT_MULAW\n");
        ret = WAVERR_BADFORMAT;
        goto error;
    } else if (wwi->format.Format.wFormatTag == WAVE_FORMAT_ALAW) {
        FIXME("unimplemented format: WAVE_FORMAT_ALAW\n");
        ret = WAVERR_BADFORMAT;
        goto error;
    } else if (wwi->format.Format.wFormatTag == WAVE_FORMAT_ADPCM) {
        FIXME("unimplemented format: WAVE_FORMAT_ADPCM\n");
        ret = WAVERR_BADFORMAT;
        goto error;
    } else {
        ERR("invalid format: %0x04x\n", wwi->format.Format.wFormatTag);
        ret = WAVERR_BADFORMAT;
        goto error;
    }

    EXIT_ON_ERROR( snd_pcm_hw_params_set_format(pcm, hw_params, format), WAVERR_BADFORMAT, "unable to set required format");

    rate = wwi->format.Format.nSamplesPerSec;
    dir = 0;
    err = snd_pcm_hw_params_set_rate_near(pcm, hw_params, &rate, &dir);
    if (err < 0) {
	WARN("Rate %d Hz not available for playback: %s\n", wwi->format.Format.nSamplesPerSec, snd_strerror(rate));
        ret = WAVERR_BADFORMAT;
        goto error;
    }
    if (!ALSA_NearMatch(rate, wwi->format.Format.nSamplesPerSec)) {
	WARN("Rate doesn't match (requested %d Hz, got %d Hz)\n", wwi->format.Format.nSamplesPerSec, rate);
        ret = WAVERR_BADFORMAT;
        goto error;
    }

    dir=0;
    EXIT_ON_ERROR( snd_pcm_hw_params_set_buffer_time_near(pcm, hw_params, &buffer_time, &dir), MMSYSERR_INVALPARAM, "unable to set buffer time");
    dir=0;
    EXIT_ON_ERROR( snd_pcm_hw_params_set_period_time_near(pcm, hw_params, &period_time, &dir), MMSYSERR_INVALPARAM, "unable to set period time");

    EXIT_ON_ERROR( snd_pcm_hw_params(pcm, hw_params), MMSYSERR_INVALPARAM, "unable to set hw params for playback");

    dir=0;
    err = snd_pcm_hw_params_get_period_size(hw_params, &period_size, &dir);
    err = snd_pcm_hw_params_get_buffer_size(hw_params, &buffer_size);

    snd_pcm_sw_params_current(pcm, sw_params);
    EXIT_ON_ERROR( snd_pcm_sw_params_set_start_threshold(pcm, sw_params, 1), MMSYSERR_ERROR, "unable to set start threshold");
    EXIT_ON_ERROR( snd_pcm_sw_params_set_silence_size(pcm, sw_params, 0), MMSYSERR_ERROR, "unable to set silence size");
    EXIT_ON_ERROR( snd_pcm_sw_params_set_avail_min(pcm, sw_params, period_size), MMSYSERR_ERROR, "unable to set avail min");
    EXIT_ON_ERROR( snd_pcm_sw_params_set_silence_threshold(pcm, sw_params, 0), MMSYSERR_ERROR, "unable to set silence threshold");
    EXIT_ON_ERROR( snd_pcm_sw_params(pcm, sw_params), MMSYSERR_ERROR, "unable to set sw params for playback");
#undef EXIT_ON_ERROR

    snd_pcm_prepare(pcm);

    if (TRACE_ON(wave))
	ALSA_TraceParameters(hw_params, sw_params, FALSE);

    /* now, we can save all required data for later use... */
    if ( wwi->hw_params )
	snd_pcm_hw_params_free(wwi->hw_params);
    snd_pcm_hw_params_malloc(&(wwi->hw_params));
    snd_pcm_hw_params_copy(wwi->hw_params, hw_params);

    wwi->dwBufferSize = snd_pcm_frames_to_bytes(pcm, buffer_size);
    wwi->lpQueuePtr = wwi->lpPlayPtr = wwi->lpLoopPtr = NULL;
    wwi->pcm = pcm;

    ALSA_InitRingMessage(&wwi->msgRing);

    wwi->dwPeriodSize = snd_pcm_frames_to_bytes(pcm, period_size);
    TRACE("dwPeriodSize=%u\n", wwi->dwPeriodSize);
    TRACE("wBitsPerSample=%u, nAvgBytesPerSec=%u, nSamplesPerSec=%u, nChannels=%u nBlockAlign=%u!\n",
	  wwi->format.Format.wBitsPerSample, wwi->format.Format.nAvgBytesPerSec,
	  wwi->format.Format.nSamplesPerSec, wwi->format.Format.nChannels,
	  wwi->format.Format.nBlockAlign);

    wwi->hStartUpEvent = CreateEventW(NULL, FALSE, FALSE, NULL);
    wwi->hThread = CreateThread(NULL, 0, widRecorder, (LPVOID)(DWORD_PTR)wDevID, 0, &(wwi->dwThreadID));
    if (wwi->hThread)
        SetThreadPriority(wwi->hThread, THREAD_PRIORITY_TIME_CRITICAL);
    WaitForSingleObject(wwi->hStartUpEvent, INFINITE);
    CloseHandle(wwi->hStartUpEvent);
    wwi->hStartUpEvent = INVALID_HANDLE_VALUE;

    HeapFree( GetProcessHeap(), 0, hw_params );
    HeapFree( GetProcessHeap(), 0, sw_params );
    return widNotifyClient(wwi, WIM_OPEN, 0L, 0L);

error:
    snd_pcm_close(pcm);
    HeapFree( GetProcessHeap(), 0, hw_params );
    HeapFree( GetProcessHeap(), 0, sw_params );
    return ret;
}
Пример #8
0
    bool setParameters (unsigned int sampleRate, int numChannels, int bufferSize)
    {
        if (handle == nullptr)
            return false;

        JUCE_ALSA_LOG ("ALSADevice::setParameters(" << deviceID << ", "
                         << (int) sampleRate << ", " << numChannels << ", " << bufferSize << ")");

        snd_pcm_hw_params_t* hwParams;
        snd_pcm_hw_params_alloca (&hwParams);

        if (snd_pcm_hw_params_any (handle, hwParams) < 0)
        {
            // this is the error message that aplay returns when an error happens here,
            // it is a bit more explicit that "Invalid parameter"
            error = "Broken configuration for this PCM: no configurations available";
            return false;
        }

        if (snd_pcm_hw_params_set_access (handle, hwParams, SND_PCM_ACCESS_RW_INTERLEAVED) >= 0) // works better for plughw..
            isInterleaved = true;
        else if (snd_pcm_hw_params_set_access (handle, hwParams, SND_PCM_ACCESS_RW_NONINTERLEAVED) >= 0)
            isInterleaved = false;
        else
        {
            jassertfalse;
            return false;
        }

        enum { isFloatBit = 1 << 16, isLittleEndianBit = 1 << 17, onlyUseLower24Bits = 1 << 18 };

        const int formatsToTry[] = { SND_PCM_FORMAT_FLOAT_LE,   32 | isFloatBit | isLittleEndianBit,
                                     SND_PCM_FORMAT_FLOAT_BE,   32 | isFloatBit,
                                     SND_PCM_FORMAT_S32_LE,     32 | isLittleEndianBit,
                                     SND_PCM_FORMAT_S32_BE,     32,
                                     SND_PCM_FORMAT_S24_3LE,    24 | isLittleEndianBit,
                                     SND_PCM_FORMAT_S24_3BE,    24,
                                     SND_PCM_FORMAT_S24_LE,     32 | isLittleEndianBit | onlyUseLower24Bits,
                                     SND_PCM_FORMAT_S16_LE,     16 | isLittleEndianBit,
                                     SND_PCM_FORMAT_S16_BE,     16 };
        bitDepth = 0;

        for (int i = 0; i < numElementsInArray (formatsToTry); i += 2)
        {
            if (snd_pcm_hw_params_set_format (handle, hwParams, (_snd_pcm_format) formatsToTry [i]) >= 0)
            {
                const int type = formatsToTry [i + 1];
                bitDepth = type & 255;

                converter.reset (createConverter (isInput, bitDepth,
                                                  (type & isFloatBit) != 0,
                                                  (type & isLittleEndianBit) != 0,
                                                  (type & onlyUseLower24Bits) != 0,
                                                  numChannels,
                                                  isInterleaved));
                break;
            }
        }

        if (bitDepth == 0)
        {
            error = "device doesn't support a compatible PCM format";
            JUCE_ALSA_LOG ("Error: " + error);
            return false;
        }

        int dir = 0;
        unsigned int periods = 4;
        snd_pcm_uframes_t samplesPerPeriod = (snd_pcm_uframes_t) bufferSize;

        if (JUCE_ALSA_FAILED (snd_pcm_hw_params_set_rate_near (handle, hwParams, &sampleRate, 0))
            || JUCE_ALSA_FAILED (snd_pcm_hw_params_set_channels (handle, hwParams, (unsigned int ) numChannels))
            || JUCE_ALSA_FAILED (snd_pcm_hw_params_set_periods_near (handle, hwParams, &periods, &dir))
            || JUCE_ALSA_FAILED (snd_pcm_hw_params_set_period_size_near (handle, hwParams, &samplesPerPeriod, &dir))
            || JUCE_ALSA_FAILED (snd_pcm_hw_params (handle, hwParams)))
        {
            return false;
        }

        snd_pcm_uframes_t frames = 0;

        if (JUCE_ALSA_FAILED (snd_pcm_hw_params_get_period_size (hwParams, &frames, &dir))
             || JUCE_ALSA_FAILED (snd_pcm_hw_params_get_periods (hwParams, &periods, &dir)))
            latency = 0;
        else
            latency = (int) frames * ((int) periods - 1); // (this is the method JACK uses to guess the latency..)

        JUCE_ALSA_LOG ("frames: " << (int) frames << ", periods: " << (int) periods
                          << ", samplesPerPeriod: " << (int) samplesPerPeriod);

        snd_pcm_sw_params_t* swParams;
        snd_pcm_sw_params_alloca (&swParams);
        snd_pcm_uframes_t boundary;

        if (JUCE_ALSA_FAILED (snd_pcm_sw_params_current (handle, swParams))
            || JUCE_ALSA_FAILED (snd_pcm_sw_params_get_boundary (swParams, &boundary))
            || JUCE_ALSA_FAILED (snd_pcm_sw_params_set_silence_threshold (handle, swParams, 0))
            || JUCE_ALSA_FAILED (snd_pcm_sw_params_set_silence_size (handle, swParams, boundary))
            || JUCE_ALSA_FAILED (snd_pcm_sw_params_set_start_threshold (handle, swParams, samplesPerPeriod))
            || JUCE_ALSA_FAILED (snd_pcm_sw_params_set_stop_threshold (handle, swParams, boundary))
            || JUCE_ALSA_FAILED (snd_pcm_sw_params (handle, swParams)))
        {
            return false;
        }

       #if JUCE_ALSA_LOGGING
        // enable this to dump the config of the devices that get opened
        snd_output_t* out;
        snd_output_stdio_attach (&out, stderr, 0);
        snd_pcm_hw_params_dump (hwParams, out);
        snd_pcm_sw_params_dump (swParams, out);
       #endif

        numChannelsRunning = numChannels;

        return true;
    }
Пример #9
0
static int
quh_alsa_config (st_quh_nfo_t *file)
{
  (void) file;
#if 0
  snd_pcm_hw_params_t *hw_params;
  snd_pcm_format_t format;
  int rate = 0;
  
  if (snd_pcm_hw_params_malloc (&hw_params) < 0)
    return -1;

  if (snd_pcm_hw_params_any (handle, hw_params) < 0)
    {
      snd_pcm_hw_params_free (hw_params);
      return -1;
    }

  if (snd_pcm_hw_params_set_access (handle, hw_params,
                                    SND_PCM_ACCESS_RW_INTERLEAVED) < 0)
    {
      snd_pcm_hw_params_free (hw_params);
      return -1;
    }

  switch (file->size)
    {
    case 1:
      format = SND_PCM_FORMAT_S8;
      break;
    case 2:
      format = SND_PCM_FORMAT_S16;
      break;
    case 3:
      format = SND_PCM_FORMAT_S24;
      break;
    default:
      format = SND_PCM_FORMAT_S16;
      break;
    }

  if (snd_pcm_hw_params_set_format (handle, hw_params, format) < 0)
    {
      snd_pcm_hw_params_free (hw_params);
      return -1;
    }

  rate = file->rate;
  if (snd_pcm_hw_params_set_rate_near (handle, hw_params, rate, 0) < 0)
    {
      snd_pcm_hw_params_free (hw_params);
      return -1;
    }

  if ((float) rate * 1.05 < file->rate || (float) rate * 0.95 > file->rate)
    {
      snd_pcm_hw_params_free (hw_params);
      return -1;
    }

  if (snd_pcm_hw_params_set_channels (handle, hw_params, file->channels) < 0)
    {
      snd_pcm_hw_params_free (hw_params);
      return -1;
    }

  if (snd_pcm_hw_params (handle, hw_params) < 0)
    {
      snd_pcm_hw_params_free (hw_params);
      return -1;
    }

  snd_pcm_hw_params_free (hw_params);
#endif
  return 0;
}
Пример #10
0
alsa_dev_t* alsa_open(char *name)
{
    alsa_dev_t *alsa_dev = NULL;
    snd_pcm_hw_params_t *params = NULL;
    uint32_t val = 0;
    int32_t rc = 0;
    int32_t dir = 0;

    alsa_dev = malloc(sizeof(alsa_dev_t));
    if (!alsa_dev)
    {
        syslog(LOG_ERR, "Failed to create audio device: Out of memory");
        exit(EXIT_FAILURE);
    }

    /* Open PCM device for recording (capture). */
    rc = snd_pcm_open(&alsa_dev->snd_pcm, name, SND_PCM_STREAM_CAPTURE, 0);
    if (rc < 0)
    {
        syslog(LOG_ERR, "Cannot open pcm device: %s", snd_strerror(rc));
        exit(EXIT_FAILURE);
    }

    alsa_dev->name = name;

    /* Allocate a hardware parameters object. */
    snd_pcm_hw_params_alloca(&params);

    /* Fill it in with default values. */
    snd_pcm_hw_params_any(alsa_dev->snd_pcm, params);

    /* Set the desired hardware parameters. */

    /* Interleaved mode */
    snd_pcm_hw_params_set_access(alsa_dev->snd_pcm, params, 
                                 SND_PCM_ACCESS_RW_INTERLEAVED);

    /* Signed 16-bit little-endian format */
    snd_pcm_hw_params_set_format(alsa_dev->snd_pcm, params, 
                                 SND_PCM_FORMAT_S16_LE);

    /* Two channels (stereo) */
    snd_pcm_hw_params_set_channels(alsa_dev->snd_pcm, params, AUDIO_CHANNEL_NUM);

    /* 44100 bits/second sampling rate (CD quality) */
    val = AUDIO_SAMPLE_RATE;
    snd_pcm_hw_params_set_rate_near(alsa_dev->snd_pcm, params, &val, &dir);

    alsa_dev->frames = 1152;
    snd_pcm_hw_params_set_period_size_near(alsa_dev->snd_pcm, params, 
                                           &alsa_dev->frames, &dir);

    /* Write the parameters to the driver */
    rc = snd_pcm_hw_params(alsa_dev->snd_pcm, params);
    if (rc < 0)
    {
        syslog(LOG_ERR, "Cannot set hw parameters: %s", snd_strerror(rc));
        exit(EXIT_FAILURE);
    }

    /* Use a buffer large enough to hold one period */
    snd_pcm_hw_params_get_period_size(params, &alsa_dev->frames, &dir);

    /* We want to loop for 5 seconds */
    snd_pcm_hw_params_get_period_time(params, &val, &dir);

    snd_pcm_prepare(alsa_dev->snd_pcm);

    snd_pcm_start(alsa_dev->snd_pcm);

    return alsa_dev;
}
av_cold int ff_alsa_open(AVFormatContext *ctx, snd_pcm_stream_t mode,
                         unsigned int *sample_rate,
                         int channels, enum CodecID *codec_id)
{
    AlsaData *s = ctx->priv_data;
    const char *audio_device;
    int res, flags = 0;
    snd_pcm_format_t format;
    snd_pcm_t *h;
    snd_pcm_hw_params_t *hw_params;
    snd_pcm_uframes_t buffer_size, period_size;
    int64_t layout = ctx->streams[0]->codec->channel_layout;

    if (ctx->filename[0] == 0) audio_device = "default";
    else                       audio_device = ctx->filename;

    if (*codec_id == CODEC_ID_NONE)
        *codec_id = DEFAULT_CODEC_ID;
    format = codec_id_to_pcm_format(*codec_id);
    if (format == SND_PCM_FORMAT_UNKNOWN) {
        av_log(ctx, AV_LOG_ERROR, "sample format 0x%04x is not supported\n", *codec_id);
        return AVERROR(ENOSYS);
    }
    s->frame_size = av_get_bits_per_sample(*codec_id) / 8 * channels;

    if (ctx->flags & AVFMT_FLAG_NONBLOCK) {
        flags = SND_PCM_NONBLOCK;
    }
    res = snd_pcm_open(&h, audio_device, mode, flags);
    if (res < 0) {
        av_log(ctx, AV_LOG_ERROR, "cannot open audio device %s (%s)\n",
               audio_device, snd_strerror(res));
        return AVERROR(EIO);
    }

    res = snd_pcm_hw_params_malloc(&hw_params);
    if (res < 0) {
        av_log(ctx, AV_LOG_ERROR, "cannot allocate hardware parameter structure (%s)\n",
               snd_strerror(res));
        goto fail1;
    }

    res = snd_pcm_hw_params_any(h, hw_params);
    if (res < 0) {
        av_log(ctx, AV_LOG_ERROR, "cannot initialize hardware parameter structure (%s)\n",
               snd_strerror(res));
        goto fail;
    }

    res = snd_pcm_hw_params_set_access(h, hw_params, SND_PCM_ACCESS_RW_INTERLEAVED);
    if (res < 0) {
        av_log(ctx, AV_LOG_ERROR, "cannot set access type (%s)\n",
               snd_strerror(res));
        goto fail;
    }

    res = snd_pcm_hw_params_set_format(h, hw_params, format);
    if (res < 0) {
        av_log(ctx, AV_LOG_ERROR, "cannot set sample format 0x%04x %d (%s)\n",
               *codec_id, format, snd_strerror(res));
        goto fail;
    }

    res = snd_pcm_hw_params_set_rate_near(h, hw_params, sample_rate, 0);
    if (res < 0) {
        av_log(ctx, AV_LOG_ERROR, "cannot set sample rate (%s)\n",
               snd_strerror(res));
        goto fail;
    }

    res = snd_pcm_hw_params_set_channels(h, hw_params, channels);
    if (res < 0) {
        av_log(ctx, AV_LOG_ERROR, "cannot set channel count to %d (%s)\n",
               channels, snd_strerror(res));
        goto fail;
    }

    snd_pcm_hw_params_get_buffer_size_max(hw_params, &buffer_size);
    buffer_size = FFMIN(buffer_size, ALSA_BUFFER_SIZE_MAX);
    /* TODO: maybe use ctx->max_picture_buffer somehow */
    res = snd_pcm_hw_params_set_buffer_size_near(h, hw_params, &buffer_size);
    if (res < 0) {
        av_log(ctx, AV_LOG_ERROR, "cannot set ALSA buffer size (%s)\n",
               snd_strerror(res));
        goto fail;
    }

    snd_pcm_hw_params_get_period_size_min(hw_params, &period_size, NULL);
    if (!period_size)
        period_size = buffer_size / 4;
    res = snd_pcm_hw_params_set_period_size_near(h, hw_params, &period_size, NULL);
    if (res < 0) {
        av_log(ctx, AV_LOG_ERROR, "cannot set ALSA period size (%s)\n",
               snd_strerror(res));
        goto fail;
    }
    s->period_size = period_size;

    res = snd_pcm_hw_params(h, hw_params);
    if (res < 0) {
        av_log(ctx, AV_LOG_ERROR, "cannot set parameters (%s)\n",
               snd_strerror(res));
        goto fail;
    }

    snd_pcm_hw_params_free(hw_params);

    if (channels > 2 && layout) {
        if (find_reorder_func(s, *codec_id, layout, mode == SND_PCM_STREAM_PLAYBACK) < 0) {
            char name[128];
            av_get_channel_layout_string(name, sizeof(name), channels, layout);
            av_log(ctx, AV_LOG_WARNING, "ALSA channel layout unknown or unimplemented for %s %s.\n",
                   name, mode == SND_PCM_STREAM_PLAYBACK ? "playback" : "capture");
        }
        if (s->reorder_func) {
            s->reorder_buf_size = buffer_size;
            s->reorder_buf = av_malloc(s->reorder_buf_size * s->frame_size);
            if (!s->reorder_buf)
                goto fail1;
        }
    }

    s->h = h;
    return 0;

fail:
    snd_pcm_hw_params_free(hw_params);
fail1:
    snd_pcm_close(h);
    return AVERROR(EIO);
}
Пример #12
0
 main() {
  long loops;
  int rc;
  int size;
  snd_pcm_t *handle;
  snd_pcm_hw_params_t *params;
  unsigned int val;
  int dir;
  snd_pcm_uframes_t frames;
 unsigned char *buffer;
  int i=0;

/* socket setting */
   int sd;
   struct sockaddr_in s_addr;
   int n, n_send, status;

   int on = 1;


   sd = socket (AF_INET, SOCK_DGRAM, 0);

   bzero(&s_addr, sizeof(s_addr));
   s_addr.sin_family = AF_INET;
   s_addr.sin_addr.s_addr = inet_addr("192.168.42.255");
   s_addr.sin_port = htons(2007);

   if((status = setsockopt(sd, SOL_SOCKET, SO_BROADCAST, &on, sizeof(on))) != 0 )
   {
      printf("setsockopt error\n");
      exit(-1);
   }


  /* Open PCM device for recording (capture). */
  rc = snd_pcm_open(&handle, "plughw:1,0",
                    SND_PCM_STREAM_CAPTURE, 0);
  if (rc < 0) {
    fprintf(stderr,
            "unable to open pcm device: %s\n",
            snd_strerror(rc));
    exit(1);
  }

  /* Allocate a hardware parameters object. */
  snd_pcm_hw_params_alloca(&params);

  /* Fill it in with default values. */
  snd_pcm_hw_params_any(handle, params);

  /* Set the desired hardware parameters. */

  /* Interleaved mode */
  snd_pcm_hw_params_set_access(handle, params,
                      SND_PCM_ACCESS_RW_INTERLEAVED);

  /* Signed 16-bit little-endian format */
  snd_pcm_hw_params_set_format(handle, params,SND_PCM_FORMAT_U8);

  /* Two channels (stereo) */
  snd_pcm_hw_params_set_channels(handle, params, 1);

  /* 44100 bits/second sampling rate (CD quality) */
  val = 44100;
  snd_pcm_hw_params_set_rate_near(handle, params,
                                  &val, &dir);

  /* Set period size to 32 frames. */
  frames =4800;
  snd_pcm_hw_params_set_period_size_near(handle,
                              params, &frames, &dir);

  /* Write the parameters to the driver */
  rc = snd_pcm_hw_params(handle, params);
  if (rc < 0) {
    fprintf(stderr,
            "unable to set hw parameters: %s\n",
            snd_strerror(rc));
    exit(1);
  }

  /* Use a buffer large enough to hold one period */
  snd_pcm_hw_params_get_period_size(params,
                                      &frames, &dir);
  size = frames *1; /* 2 bytes/sample, 2 channels */

  buffer = (unsigned char*) malloc(size);
	
  /* We want to loop for 5 seconds */
  snd_pcm_hw_params_get_period_time(params,
                                         &val, &dir);
  while (1) {
    rc = snd_pcm_readi(handle, buffer, frames);
    if (rc == -EPIPE) {
      /* EPIPE means overrun */
      fprintf(stderr, "overrun occurred\n");
      snd_pcm_prepare(handle);
    } else if (rc < 0) {
      fprintf(stderr,
              "error from read: %s\n",
              snd_strerror(rc));
    } else if (rc != (int)frames) {
      fprintf(stderr, "short read, read %d frames\n", rc);
    }

if ((n_send = sendto(sd, buffer, strlen(buffer), 0, (struct sockaddr *)&s_addr, sizeof(s_addr))) < 0 ) {
	fprintf(stderr, "sendto() error");
         exit(-3);
      }
   }
  snd_pcm_drain(handle);
  snd_pcm_close(handle);
  free(buffer);
   close(sd);
}
Пример #13
0
int AudioAlsa::setHWParams( const ch_cnt_t _channels, snd_pcm_access_t _access )
{
	int err, dir;

	// choose all parameters
	if( ( err = snd_pcm_hw_params_any( m_handle, m_hwParams ) ) < 0 )
	{
		printf( "Broken configuration for playback: no configurations "
				"available: %s\n", snd_strerror( err ) );
		return err;
	}

	// set the interleaved read/write format
	if( ( err = snd_pcm_hw_params_set_access( m_handle, m_hwParams,
							_access ) ) < 0 )
	{
		printf( "Access type not available for playback: %s\n",
							snd_strerror( err ) );
		return err;
	}

	// set the sample format
	if( ( snd_pcm_hw_params_set_format( m_handle, m_hwParams,
						SND_PCM_FORMAT_S16_LE ) ) < 0 )
	{
		if( ( snd_pcm_hw_params_set_format( m_handle, m_hwParams,
						SND_PCM_FORMAT_S16_BE ) ) < 0 )
		{
			printf( "Neither little- nor big-endian available for "
					"playback: %s\n", snd_strerror( err ) );
			return err;
		}
		m_convertEndian = isLittleEndian();
	}
	else
	{
		m_convertEndian = !isLittleEndian();
	}

	// set the count of channels
	if( ( err = snd_pcm_hw_params_set_channels( m_handle, m_hwParams,
							_channels ) ) < 0 )
	{
		printf( "Channel count (%i) not available for playbacks: %s\n"
				"(Does your soundcard not support surround?)\n",
					_channels, snd_strerror( err ) );
		return err;
	}

	// set the sample rate
	if( ( err = snd_pcm_hw_params_set_rate( m_handle, m_hwParams,
						sampleRate(), 0 ) ) < 0 )
	{
		if( ( err = snd_pcm_hw_params_set_rate( m_handle, m_hwParams,
				mixer()->baseSampleRate(), 0 ) ) < 0 )
		{
			printf( "Could not set sample rate: %s\n",
							snd_strerror( err ) );
			return err;
		}
	}

	m_periodSize = mixer()->framesPerPeriod();
	m_bufferSize = m_periodSize * 8;
	dir = 0;
	err = snd_pcm_hw_params_set_period_size_near( m_handle, m_hwParams,
							&m_periodSize, &dir );
	if( err < 0 )
	{
		printf( "Unable to set period size %lu for playback: %s\n",
					m_periodSize, snd_strerror( err ) );
		return err;
	}
	dir = 0;
	err = snd_pcm_hw_params_get_period_size( m_hwParams, &m_periodSize,
									&dir );
	if( err < 0 )
	{
		printf( "Unable to get period size for playback: %s\n",
							snd_strerror( err ) );
	}

	dir = 0;
	err = snd_pcm_hw_params_set_buffer_size_near( m_handle, m_hwParams,
								&m_bufferSize );
	if( err < 0 )
	{
		printf( "Unable to set buffer size %lu for playback: %s\n",
					m_bufferSize, snd_strerror( err ) );
		return ( err );
	}
	err = snd_pcm_hw_params_get_buffer_size( m_hwParams, &m_bufferSize );

	if( 2 * m_periodSize > m_bufferSize )
	{
		printf( "buffer to small, could not use\n" );
		return ( err );
	}


	// write the parameters to device
	err = snd_pcm_hw_params( m_handle, m_hwParams );
	if( err < 0 )
	{
		printf( "Unable to set hw params for playback: %s\n",
							snd_strerror( err ) );
		return ( err );
	}

	return ( 0 );	// all ok
}
Пример #14
0
static HRESULT SetFormat(IDsDriverBufferImpl *This, LPWAVEFORMATEX pwfx)
{
    snd_pcm_t *pcm = NULL;
    snd_pcm_hw_params_t *hw_params = This->hw_params;
    unsigned int buffer_time = 500000;
    snd_pcm_format_t format = -1;
    snd_pcm_uframes_t psize;
    DWORD rate = pwfx->nSamplesPerSec;
    int err=0;

    switch (pwfx->wBitsPerSample)
    {
        case  8: format = SND_PCM_FORMAT_U8; break;
        case 16: format = SND_PCM_FORMAT_S16_LE; break;
        case 24: format = SND_PCM_FORMAT_S24_3LE; break;
        case 32: format = SND_PCM_FORMAT_S32_LE; break;
        default: FIXME("Unsupported bpp: %d\n", pwfx->wBitsPerSample); return DSERR_GENERIC;
    }

    err = snd_pcm_open(&pcm, WOutDev[This->drv->wDevID].pcmname, SND_PCM_STREAM_PLAYBACK, SND_PCM_NONBLOCK);
    if (err < 0)
    {
        if (errno != EBUSY || !This->pcm)
        {
            WARN("Cannot open sound device: %s\n", snd_strerror(err));
            return DSERR_GENERIC;
        }
        snd_pcm_drop(This->pcm);
        snd_pcm_close(This->pcm);
        This->pcm = NULL;
        err = snd_pcm_open(&pcm, WOutDev[This->drv->wDevID].pcmname, SND_PCM_STREAM_PLAYBACK, SND_PCM_NONBLOCK);
        if (err < 0)
        {
            WARN("Cannot open sound device: %s\n", snd_strerror(err));
            return DSERR_BUFFERLOST;
        }
    }

    /* Set some defaults */
    snd_pcm_hw_params_any(pcm, hw_params);
    err = snd_pcm_hw_params_set_channels(pcm, hw_params, pwfx->nChannels);
    if (err < 0) { WARN("Could not set channels to %d\n", pwfx->nChannels); goto err; }

    err = snd_pcm_hw_params_set_format(pcm, hw_params, format);
    if (err < 0) { WARN("Could not set format to %d bpp\n", pwfx->wBitsPerSample); goto err; }

    /* Alsa's rate resampling is only used if the application specifically requests
     * a buffer at a certain frequency, else it is better to disable it due to unwanted
     * side effects, which may include: Less granular pointer, changing buffer sizes, etc
     */
#if SND_LIB_VERSION >= 0x010009
    snd_pcm_hw_params_set_rate_resample(pcm, hw_params, 0);
#endif

    err = snd_pcm_hw_params_set_rate_near(pcm, hw_params, &rate, NULL);
    if (err < 0) { rate = pwfx->nSamplesPerSec; WARN("Could not set rate\n"); goto err; }

    if (!ALSA_NearMatch(rate, pwfx->nSamplesPerSec))
    {
        WARN("Could not set sound rate to %d, but instead to %d\n", pwfx->nSamplesPerSec, rate);
        pwfx->nSamplesPerSec = rate;
        pwfx->nAvgBytesPerSec = rate * pwfx->nBlockAlign;
        /* Let DirectSound detect this */
    }

    snd_pcm_hw_params_set_periods_integer(pcm, hw_params);
    snd_pcm_hw_params_set_buffer_time_near(pcm, hw_params, &buffer_time, NULL);
    buffer_time = 10000;
    snd_pcm_hw_params_set_period_time_near(pcm, hw_params, &buffer_time, NULL);

    err = snd_pcm_hw_params_get_period_size(hw_params, &psize, NULL);
    buffer_time = 16;
    snd_pcm_hw_params_set_periods_near(pcm, hw_params, &buffer_time, NULL);

    if (!This->mmap)
    {
        HeapFree(GetProcessHeap(), 0, This->mmap_buffer);
        This->mmap_buffer = NULL;
    }

    err = snd_pcm_hw_params_set_access (pcm, hw_params, SND_PCM_ACCESS_MMAP_INTERLEAVED);
    if (err >= 0)
        This->mmap = 1;
    else
    {
        This->mmap = 0;
        err = snd_pcm_hw_params_set_access (pcm, hw_params, SND_PCM_ACCESS_RW_INTERLEAVED);
    }

    err = snd_pcm_hw_params(pcm, hw_params);

    /* ALSA needs at least 3 buffers to work successfully */
    This->mmap_commitahead = 3 * psize;
    while (This->mmap_commitahead <= 512)
        This->mmap_commitahead += psize;

    if (This->pcm)
    {
        snd_pcm_drop(This->pcm);
        snd_pcm_close(This->pcm);
    }
    This->pcm = pcm;
    snd_pcm_prepare(This->pcm);
    DSDB_CreateMMAP(This);
    return S_OK;

    err:
    if (err < 0)
        WARN("Failed to apply changes: %s\n", snd_strerror(err));

    if (!This->pcm)
        This->pcm = pcm;
    else
        snd_pcm_close(pcm);

    if (This->pcm)
        snd_pcm_hw_params_current(This->pcm, This->hw_params);

    return DSERR_BADFORMAT;
}
Пример #15
0
static RD_BOOL
alsa_set_format(snd_pcm_t * pcm, RD_WAVEFORMATEX * pwfx)
{
	snd_pcm_hw_params_t *hwparams = NULL;
	int err;
	unsigned int buffertime;
	short samplewidth;
	int audiochannels;
	unsigned int rate;

	samplewidth = pwfx->wBitsPerSample / 8;

	if ((err = snd_pcm_hw_params_malloc(&hwparams)) < 0)
	{
		error("snd_pcm_hw_params_malloc: %s\n", snd_strerror(err));
		return False;
	}

	if ((err = snd_pcm_hw_params_any(pcm, hwparams)) < 0)
	{
		error("snd_pcm_hw_params_any: %s\n", snd_strerror(err));
		return False;
	}

	if ((err = snd_pcm_hw_params_set_access(pcm, hwparams, SND_PCM_ACCESS_RW_INTERLEAVED)) < 0)
	{
		error("snd_pcm_hw_params_set_access: %s\n", snd_strerror(err));
		return False;
	}

	if (pwfx->wBitsPerSample == 16)
	{
		if ((err = snd_pcm_hw_params_set_format(pcm, hwparams, SND_PCM_FORMAT_S16_LE)) < 0)
		{
			error("snd_pcm_hw_params_set_format: %s\n", snd_strerror(err));
			return False;
		}
	}
	else
	{
		if ((err = snd_pcm_hw_params_set_format(pcm, hwparams, SND_PCM_FORMAT_S8)) < 0)
		{
			error("snd_pcm_hw_params_set_format: %s\n", snd_strerror(err));
			return False;
		}
	}

#if 0
	if ((err = snd_pcm_hw_params_set_rate_resample(pcm, hwparams, 1)) < 0)
	{
		error("snd_pcm_hw_params_set_rate_resample: %s\n", snd_strerror(err));
		return False;
	}
#endif

	rate = pwfx->nSamplesPerSec;
	if ((err = snd_pcm_hw_params_set_rate_near(pcm, hwparams, &rate, 0)) < 0)
	{
		error("snd_pcm_hw_params_set_rate_near: %s\n", snd_strerror(err));
		return False;
	}

	audiochannels = pwfx->nChannels;
	if ((err = snd_pcm_hw_params_set_channels(pcm, hwparams, pwfx->nChannels)) < 0)
	{
		error("snd_pcm_hw_params_set_channels: %s\n", snd_strerror(err));
		return False;
	}


	buffertime = 500000;	/* microseconds */
	if ((err = snd_pcm_hw_params_set_buffer_time_near(pcm, hwparams, &buffertime, 0)) < 0)
	{
		error("snd_pcm_hw_params_set_buffer_time_near: %s\n", snd_strerror(err));
		return False;
	}

	if ((err = snd_pcm_hw_params(pcm, hwparams)) < 0)
	{
		error("snd_pcm_hw_params: %s\n", snd_strerror(err));
		return False;
	}

	snd_pcm_hw_params_free(hwparams);

	if ((err = snd_pcm_prepare(pcm)) < 0)
	{
		error("snd_pcm_prepare: %s\n", snd_strerror(err));
		return False;
	}

	reopened = True;

	return True;
}
Пример #16
0
static ALCboolean alsa_reset_playback(ALCdevice *device)
{
    alsa_data *data = (alsa_data*)device->ExtraData;
    snd_pcm_uframes_t periodSizeInFrames;
    unsigned int periodLen, bufferLen;
    snd_pcm_sw_params_t *sp = NULL;
    snd_pcm_hw_params_t *hp = NULL;
    snd_pcm_access_t access;
    snd_pcm_format_t format;
    unsigned int periods;
    unsigned int rate;
    const char *funcerr;
    int allowmmap;
    int err;

    format = -1;
    switch(device->FmtType)
    {
        case DevFmtByte:
            format = SND_PCM_FORMAT_S8;
            break;
        case DevFmtUByte:
            format = SND_PCM_FORMAT_U8;
            break;
        case DevFmtShort:
            format = SND_PCM_FORMAT_S16;
            break;
        case DevFmtUShort:
            format = SND_PCM_FORMAT_U16;
            break;
        case DevFmtInt:
            format = SND_PCM_FORMAT_S32;
            break;
        case DevFmtUInt:
            format = SND_PCM_FORMAT_U32;
            break;
        case DevFmtFloat:
            format = SND_PCM_FORMAT_FLOAT;
            break;
    }

    allowmmap = GetConfigValueBool("alsa", "mmap", 1);
    periods = device->NumUpdates;
    periodLen = (ALuint64)device->UpdateSize * 1000000 / device->Frequency;
    bufferLen = periodLen * periods;
    rate = device->Frequency;

    snd_pcm_hw_params_malloc(&hp);
#define CHECK(x) if((funcerr=#x),(err=(x)) < 0) goto error
    CHECK(snd_pcm_hw_params_any(data->pcmHandle, hp));
    /* set interleaved access */
    if(!allowmmap || snd_pcm_hw_params_set_access(data->pcmHandle, hp, SND_PCM_ACCESS_MMAP_INTERLEAVED) < 0)
    {
        if(periods > 2)
        {
            periods--;
            bufferLen = periodLen * periods;
        }
        CHECK(snd_pcm_hw_params_set_access(data->pcmHandle, hp, SND_PCM_ACCESS_RW_INTERLEAVED));
    }
    /* test and set format (implicitly sets sample bits) */
    if(snd_pcm_hw_params_test_format(data->pcmHandle, hp, format) < 0)
    {
        static const struct {
            snd_pcm_format_t format;
            enum DevFmtType fmttype;
        } formatlist[] = {
            { SND_PCM_FORMAT_FLOAT, DevFmtFloat  },
            { SND_PCM_FORMAT_S32,   DevFmtInt    },
            { SND_PCM_FORMAT_U32,   DevFmtUInt   },
            { SND_PCM_FORMAT_S16,   DevFmtShort  },
            { SND_PCM_FORMAT_U16,   DevFmtUShort },
            { SND_PCM_FORMAT_S8,    DevFmtByte   },
            { SND_PCM_FORMAT_U8,    DevFmtUByte  },
        };
        size_t k;

        for(k = 0;k < COUNTOF(formatlist);k++)
        {
            format = formatlist[k].format;
            if(snd_pcm_hw_params_test_format(data->pcmHandle, hp, format) >= 0)
            {
                device->FmtType = formatlist[k].fmttype;
                break;
            }
        }
    }
    CHECK(snd_pcm_hw_params_set_format(data->pcmHandle, hp, format));
    /* test and set channels (implicitly sets frame bits) */
    if(snd_pcm_hw_params_test_channels(data->pcmHandle, hp, ChannelsFromDevFmt(device->FmtChans)) < 0)
    {
        static const enum DevFmtChannels channellist[] = {
            DevFmtStereo,
            DevFmtQuad,
            DevFmtX51,
            DevFmtX71,
            DevFmtMono,
        };
        size_t k;

        for(k = 0;k < COUNTOF(channellist);k++)
        {
            if(snd_pcm_hw_params_test_channels(data->pcmHandle, hp, ChannelsFromDevFmt(channellist[k])) >= 0)
            {
                device->FmtChans = channellist[k];
                break;
            }
        }
    }
    CHECK(snd_pcm_hw_params_set_channels(data->pcmHandle, hp, ChannelsFromDevFmt(device->FmtChans)));
    /* set rate (implicitly constrains period/buffer parameters) */
    if(snd_pcm_hw_params_set_rate_resample(data->pcmHandle, hp, 0) < 0)
        ERR("Failed to disable ALSA resampler\n");
    CHECK(snd_pcm_hw_params_set_rate_near(data->pcmHandle, hp, &rate, NULL));
    /* set buffer time (implicitly constrains period/buffer parameters) */
    CHECK(snd_pcm_hw_params_set_buffer_time_near(data->pcmHandle, hp, &bufferLen, NULL));
    /* set period time (implicitly sets buffer size/bytes/time and period size/bytes) */
    CHECK(snd_pcm_hw_params_set_period_time_near(data->pcmHandle, hp, &periodLen, NULL));
    /* install and prepare hardware configuration */
    CHECK(snd_pcm_hw_params(data->pcmHandle, hp));
    /* retrieve configuration info */
    CHECK(snd_pcm_hw_params_get_access(hp, &access));
    CHECK(snd_pcm_hw_params_get_period_size(hp, &periodSizeInFrames, NULL));
    CHECK(snd_pcm_hw_params_get_periods(hp, &periods, NULL));

    snd_pcm_hw_params_free(hp);
    hp = NULL;
    snd_pcm_sw_params_malloc(&sp);

    CHECK(snd_pcm_sw_params_current(data->pcmHandle, sp));
    CHECK(snd_pcm_sw_params_set_avail_min(data->pcmHandle, sp, periodSizeInFrames));
    CHECK(snd_pcm_sw_params_set_stop_threshold(data->pcmHandle, sp, periodSizeInFrames*periods));
    CHECK(snd_pcm_sw_params(data->pcmHandle, sp));
#undef CHECK
    snd_pcm_sw_params_free(sp);
    sp = NULL;

    /* Increase periods by one, since the temp buffer counts as an extra
     * period */
    if(access == SND_PCM_ACCESS_RW_INTERLEAVED)
        device->NumUpdates = periods+1;
    else
        device->NumUpdates = periods;
    device->UpdateSize = periodSizeInFrames;
    device->Frequency = rate;

    SetDefaultChannelOrder(device);

    return ALC_TRUE;

error:
    ERR("%s failed: %s\n", funcerr, snd_strerror(err));
    if(hp) snd_pcm_hw_params_free(hp);
    if(sp) snd_pcm_sw_params_free(sp);
    return ALC_FALSE;
}
Пример #17
0
int main()
{
	int fp;
  unsigned int pcm, tmp, dir;
  int buff_size;
	
  long loops;
  int rc;
  int size;
  snd_pcm_t *handle;
  snd_pcm_hw_params_t *params;
  unsigned int val;
  
  snd_pcm_uframes_t frames;
  char *buff;
  int rate, channels, seconds;

  /* Open PCM device for recording (capture). */
  rc = snd_pcm_open(&handle, "default", SND_PCM_STREAM_CAPTURE, 0);

  if (rc < 0) 
  {
    fprintf(stderr,"unable to open pcm device: %s\n",   snd_strerror(rc));
    exit(1);
  }

  /* Allocate a hardware parameters object. */
  snd_pcm_hw_params_alloca(&params);

  /* Fill it in with default values. */
  snd_pcm_hw_params_any(handle, params);

  /* Set the desired hardware parameters. */

  /* Interleaved mode */
  snd_pcm_hw_params_set_access(handle, params,  SND_PCM_ACCESS_RW_INTERLEAVED);

  /* Signed 16-bit little-endian format */
  snd_pcm_hw_params_set_format(handle, params,SND_PCM_FORMAT_U8);

  /* Two channels (stereo) */
  snd_pcm_hw_params_set_channels(handle, params, 1);

  /* 44100 bits/second sampling rate (CD quality) */
  val = 8000;
  
  snd_pcm_hw_params_set_rate_near(handle, params,  &val, &dir);

  /* Set period size to 32 frames. */
  frames = 32;
  snd_pcm_hw_params_set_period_size_near(handle,params, &frames, &dir);

  /* Write the parameters to the driver */
  rc = snd_pcm_hw_params(handle, params);
  if (rc < 0) 
  {
    fprintf(stderr,"unable to set hw parameters: %s\n", snd_strerror(rc));
    exit(1);
  }

  /* Use a buff large enough to hold one period */

  snd_pcm_hw_params_get_period_size(params,  &frames, &dir);
  size = frames * 4; /* 2 bytes/sample, 2 channels */
  buff = (char *) malloc(size);

  /* We want to loop for 5 seconds */

  snd_pcm_hw_params_get_period_time(params, &val, &dir);
  loops = 50000000 / val;

	fp=open("222.wav",O_WRONLY);
  while (loops > 0) 
  {
		loops--;
		bzero(buff,sizeof(buff));
		rc = snd_pcm_readi(handle, buff, frames);
		write(fp,buff,128);
		if (rc == -EPIPE) 
		{
		  /* EPIPE means overrun */
		  fprintf(stderr, "overrun occurred\n");
		  snd_pcm_prepare(handle);
		} else if (rc < 0) 
		{
		  fprintf(stderr,"error from read: %s\n",  snd_strerror(rc));
		} else if (rc != (int)frames) 
		{
		  fprintf(stderr, "short read, read %d frames\n", rc);
		}
		
		/*rc = write(1, buff, size);
		if (rc != size)
		  fprintf(stderr,"short write: wrote %d bytes\n", rc);
	*/
  }

  snd_pcm_drain(handle);
  snd_pcm_close(handle);
  
	free(buff);

	return 0;
}
Пример #18
0
static ALCenum alsa_open_capture(ALCdevice *Device, const ALCchar *deviceName)
{
    const char *driver = NULL;
    snd_pcm_hw_params_t *hp;
    snd_pcm_uframes_t bufferSizeInFrames;
    snd_pcm_uframes_t periodSizeInFrames;
    ALboolean needring = AL_FALSE;
    snd_pcm_format_t format;
    const char *funcerr;
    alsa_data *data;
    int err;

    if(deviceName)
    {
        size_t idx;

        if(!allCaptureDevNameMap)
            allCaptureDevNameMap = probe_devices(SND_PCM_STREAM_CAPTURE, &numCaptureDevNames);

        for(idx = 0;idx < numCaptureDevNames;idx++)
        {
            if(strcmp(deviceName, allCaptureDevNameMap[idx].name) == 0)
            {
                driver = allCaptureDevNameMap[idx].device;
                break;
            }
        }
        if(idx == numCaptureDevNames)
            return ALC_INVALID_VALUE;
    }
    else
    {
        deviceName = alsaDevice;
        driver = GetConfigValue("alsa", "capture", "default");
    }

    data = (alsa_data*)calloc(1, sizeof(alsa_data));

    err = snd_pcm_open(&data->pcmHandle, driver, SND_PCM_STREAM_CAPTURE, SND_PCM_NONBLOCK);
    if(err < 0)
    {
        ERR("Could not open capture device '%s': %s\n", driver, snd_strerror(err));
        free(data);
        return ALC_INVALID_VALUE;
    }

    format = -1;
    switch(Device->FmtType)
    {
        case DevFmtByte:
            format = SND_PCM_FORMAT_S8;
            break;
        case DevFmtUByte:
            format = SND_PCM_FORMAT_U8;
            break;
        case DevFmtShort:
            format = SND_PCM_FORMAT_S16;
            break;
        case DevFmtUShort:
            format = SND_PCM_FORMAT_U16;
            break;
        case DevFmtInt:
            format = SND_PCM_FORMAT_S32;
            break;
        case DevFmtUInt:
            format = SND_PCM_FORMAT_U32;
            break;
        case DevFmtFloat:
            format = SND_PCM_FORMAT_FLOAT;
            break;
    }

    funcerr = NULL;
    bufferSizeInFrames = maxu(Device->UpdateSize*Device->NumUpdates,
                              100*Device->Frequency/1000);
    periodSizeInFrames = minu(bufferSizeInFrames, 25*Device->Frequency/1000);

    snd_pcm_hw_params_malloc(&hp);
#define CHECK(x) if((funcerr=#x),(err=(x)) < 0) goto error
    CHECK(snd_pcm_hw_params_any(data->pcmHandle, hp));
    /* set interleaved access */
    CHECK(snd_pcm_hw_params_set_access(data->pcmHandle, hp, SND_PCM_ACCESS_RW_INTERLEAVED));
    /* set format (implicitly sets sample bits) */
    CHECK(snd_pcm_hw_params_set_format(data->pcmHandle, hp, format));
    /* set channels (implicitly sets frame bits) */
    CHECK(snd_pcm_hw_params_set_channels(data->pcmHandle, hp, ChannelsFromDevFmt(Device->FmtChans)));
    /* set rate (implicitly constrains period/buffer parameters) */
    CHECK(snd_pcm_hw_params_set_rate(data->pcmHandle, hp, Device->Frequency, 0));
    /* set buffer size in frame units (implicitly sets period size/bytes/time and buffer time/bytes) */
    if(snd_pcm_hw_params_set_buffer_size_min(data->pcmHandle, hp, &bufferSizeInFrames) < 0)
    {
        TRACE("Buffer too large, using intermediate ring buffer\n");
        needring = AL_TRUE;
        CHECK(snd_pcm_hw_params_set_buffer_size_near(data->pcmHandle, hp, &bufferSizeInFrames));
    }
    /* set buffer size in frame units (implicitly sets period size/bytes/time and buffer time/bytes) */
    CHECK(snd_pcm_hw_params_set_period_size_near(data->pcmHandle, hp, &periodSizeInFrames, NULL));
    /* install and prepare hardware configuration */
    CHECK(snd_pcm_hw_params(data->pcmHandle, hp));
    /* retrieve configuration info */
    CHECK(snd_pcm_hw_params_get_period_size(hp, &periodSizeInFrames, NULL));
#undef CHECK
    snd_pcm_hw_params_free(hp);
    hp = NULL;

    if(needring)
    {
        data->ring = CreateRingBuffer(FrameSizeFromDevFmt(Device->FmtChans, Device->FmtType),
                                      Device->UpdateSize*Device->NumUpdates);
        if(!data->ring)
        {
            ERR("ring buffer create failed\n");
            goto error2;
        }

        data->size = snd_pcm_frames_to_bytes(data->pcmHandle, periodSizeInFrames);
        data->buffer = malloc(data->size);
        if(!data->buffer)
        {
            ERR("buffer malloc failed\n");
            goto error2;
        }
    }

    Device->DeviceName = strdup(deviceName);

    Device->ExtraData = data;
    return ALC_NO_ERROR;

error:
    ERR("%s failed: %s\n", funcerr, snd_strerror(err));
    if(hp) snd_pcm_hw_params_free(hp);

error2:
    free(data->buffer);
    DestroyRingBuffer(data->ring);
    snd_pcm_close(data->pcmHandle);
    free(data);

    Device->ExtraData = NULL;
    return ALC_INVALID_VALUE;
}
    /**
     * Create and initialize Alsa audio output device with given parameters.
     *
     * @param Parameters - optional parameters
     * @throws AudioOutputException  if output device cannot be opened
     */
    AudioOutputDeviceAlsa::AudioOutputDeviceAlsa(std::map<String,DeviceCreationParameter*> Parameters) : AudioOutputDevice(Parameters), Thread(true, true, 1, 0) {
        pcm_handle           = NULL;
        stream               = SND_PCM_STREAM_PLAYBACK;
        this->uiAlsaChannels = ((DeviceCreationParameterInt*)Parameters["CHANNELS"])->ValueAsInt();
        this->uiSamplerate   = ((DeviceCreationParameterInt*)Parameters["SAMPLERATE"])->ValueAsInt();
        this->FragmentSize   = ((DeviceCreationParameterInt*)Parameters["FRAGMENTSIZE"])->ValueAsInt();
        uint Fragments       = ((DeviceCreationParameterInt*)Parameters["FRAGMENTS"])->ValueAsInt();
        String Card          = ((DeviceCreationParameterString*)Parameters["CARD"])->ValueAsString();

        dmsg(2,("Checking if hw parameters supported...\n"));
        if (HardwareParametersSupported(Card, uiAlsaChannels, uiSamplerate, Fragments, FragmentSize)) {
            pcm_name = "hw:" + Card;
        }
        else {
            fprintf(stderr, "Warning: your soundcard doesn't support chosen hardware parameters; ");
            fprintf(stderr, "trying to compensate support lack with plughw...");
            fflush(stdout);
            pcm_name = "plughw:" + Card;
        }
        dmsg(2,("HW check completed.\n"));

        int err;

        snd_pcm_hw_params_alloca(&hwparams);  // Allocate the snd_pcm_hw_params_t structure on the stack.

        /* Open PCM. The last parameter of this function is the mode. */
        /* If this is set to 0, the standard mode is used. Possible   */
        /* other values are SND_PCM_NONBLOCK and SND_PCM_ASYNC.       */
        /* If SND_PCM_NONBLOCK is used, read / write access to the    */
        /* PCM device will return immediately. If SND_PCM_ASYNC is    */
        /* specified, SIGIO will be emitted whenever a period has     */
        /* been completely processed by the soundcard.                */
        if ((err = snd_pcm_open(&pcm_handle, pcm_name.c_str(), stream, 0)) < 0) {
            throw AudioOutputException(String("Error opening PCM device ") + pcm_name + ": " + snd_strerror(err));
        }

        if ((err = snd_pcm_hw_params_any(pcm_handle, hwparams)) < 0) {
            throw AudioOutputException(String("Error, cannot initialize hardware parameter structure: ") + snd_strerror(err));
        }

        /* Set access type. This can be either    */
        /* SND_PCM_ACCESS_RW_INTERLEAVED or       */
        /* SND_PCM_ACCESS_RW_NONINTERLEAVED.      */
        if ((err = snd_pcm_hw_params_set_access(pcm_handle, hwparams, SND_PCM_ACCESS_RW_INTERLEAVED)) < 0) {
            throw AudioOutputException(String("Error snd_pcm_hw_params_set_access: ") + snd_strerror(err));
        }

        /* Set sample format */
        #if WORDS_BIGENDIAN
        if ((err = snd_pcm_hw_params_set_format(pcm_handle, hwparams, SND_PCM_FORMAT_S16_BE)) < 0)
        #else // little endian
        if ((err = snd_pcm_hw_params_set_format(pcm_handle, hwparams, SND_PCM_FORMAT_S16_LE)) < 0)
        #endif
        {
            throw AudioOutputException(String("Error setting sample format: ") + snd_strerror(err));
        }

        int dir = 0;

        /* Set sample rate. If the exact rate is not supported */
        /* by the hardware, use nearest possible rate.         */
        #if ALSA_MAJOR > 0
        if((err = snd_pcm_hw_params_set_rate_near(pcm_handle, hwparams, &uiSamplerate, &dir)) < 0)
        #else
        if((err = snd_pcm_hw_params_set_rate_near(pcm_handle, hwparams, uiSamplerate, &dir)) < 0)
        #endif
        {
            throw AudioOutputException(String("Error setting sample rate: ") + snd_strerror(err));
        }

        if ((err = snd_pcm_hw_params_set_channels(pcm_handle, hwparams, uiAlsaChannels)) < 0) {
            throw AudioOutputException(String("Error setting number of channels: ") + snd_strerror(err));
        }

        /* Set number of periods. Periods used to be called fragments. */
        if ((err = snd_pcm_hw_params_set_periods(pcm_handle, hwparams, Fragments, dir)) < 0) {
            throw AudioOutputException(String("Error setting number of ") + ToString(Fragments) + " periods: " + snd_strerror(err));
        }

        /* Set buffer size (in frames). The resulting latency is given by */
        /* latency = periodsize * periods / (rate * bytes_per_frame)     */
        if ((err = snd_pcm_hw_params_set_buffer_size(pcm_handle, hwparams, (FragmentSize * Fragments))) < 0) {
            throw AudioOutputException(String("Error setting buffersize: ") + snd_strerror(err));
        }

        /* Apply HW parameter settings to */
        /* PCM device and prepare device  */
        if ((err = snd_pcm_hw_params(pcm_handle, hwparams)) < 0) {
            throw AudioOutputException(String("Error setting HW params: ") + snd_strerror(err));
        }

        if (snd_pcm_sw_params_malloc(&swparams) != 0) {
            throw AudioOutputException(String("Error in snd_pcm_sw_params_malloc: ") + snd_strerror(err));
        }

        if (snd_pcm_sw_params_current(pcm_handle, swparams) != 0) {
            throw AudioOutputException(String("Error in snd_pcm_sw_params_current: ") + snd_strerror(err));
        }

        if (snd_pcm_sw_params_set_stop_threshold(pcm_handle, swparams, 0xffffffff) != 0) {
            throw AudioOutputException(String("Error in snd_pcm_sw_params_set_stop_threshold: ") + snd_strerror(err));
        }

        if (snd_pcm_sw_params(pcm_handle, swparams) != 0) {
            throw AudioOutputException(String("Error in snd_pcm_sw_params: ") + snd_strerror(err));
        }

        if ((err = snd_pcm_prepare(pcm_handle)) < 0) {
            throw AudioOutputException(String("Error snd_pcm_prepare: ") + snd_strerror(err));
        }

        // allocate Alsa output buffer
        pAlsaOutputBuffer = new int16_t[uiAlsaChannels * FragmentSize];

        // create audio channels for this audio device to which the sampler engines can write to
        for (int i = 0; i < uiAlsaChannels; i++) this->Channels.push_back(new AudioChannel(i, FragmentSize));

	if (((DeviceCreationParameterBool*)Parameters["ACTIVE"])->ValueAsBool()) {
		Play();
	}
    }
Пример #20
0
// We're making these functions static - there's no need to pollute the global namespace
static void alsa_init(audio_backend_pull_callback_t pull_callback)
{
	snd_pcm_hw_params_t *params;
	unsigned int val;
	int dir=-1;

	string device = cfgLoadStr("alsa", "device", "");

	int rc = -1;
	if (device == "" || device == "auto")
	{
		printf("ALSA: trying to determine audio device\n");

		// trying default device
		device = "default";
		rc = snd_pcm_open(&handle, device.c_str(), SND_PCM_STREAM_PLAYBACK, 0);

		// "default" didn't work, try first device
		if (rc < 0)
		{
			device = "plughw:0,0,0";
			rc = snd_pcm_open(&handle, device.c_str(), SND_PCM_STREAM_PLAYBACK, 0);

			if (rc < 0)
			{
				device = "plughw:0,0";
				rc = snd_pcm_open(&handle, device.c_str(), SND_PCM_STREAM_PLAYBACK, 0);
			}
		}

		// first didn't work, try second
		if (rc < 0)
		{
			device = "plughw:1,0";
			rc = snd_pcm_open(&handle, device.c_str(), SND_PCM_STREAM_PLAYBACK, 0);
		}

		// try pulse audio backend
		if (rc < 0)
		{
			device = "pulse";
			rc = snd_pcm_open(&handle, device.c_str(), SND_PCM_STREAM_PLAYBACK, 0);
		}

		if (rc < 0)
			printf("ALSA: unable to automatically determine audio device.\n");
	}
	else {
		rc = snd_pcm_open(&handle, device.c_str(), SND_PCM_STREAM_PLAYBACK, 0);
	}

	if (rc < 0)
	{
		fprintf(stderr, "ALSA: unable to open PCM device %s: %s\n", device.c_str(), snd_strerror(rc));
		return;
	}

	printf("ALSA: Successfully initialized \"%s\"\n", device.c_str());

	/* Allocate a hardware parameters object. */
	snd_pcm_hw_params_alloca(&params);

	/* Fill it in with default values. */
	rc=snd_pcm_hw_params_any(handle, params);
	if (rc < 0)
	{
		fprintf(stderr, "ALSA: Error:snd_pcm_hw_params_any %s\n", snd_strerror(rc));
		return;
	}

	/* Set the desired hardware parameters. */

	/* Interleaved mode */
	rc=snd_pcm_hw_params_set_access(handle, params, SND_PCM_ACCESS_RW_INTERLEAVED);
	if (rc < 0)
	{
		fprintf(stderr, "ALSA: Error:snd_pcm_hw_params_set_access %s\n", snd_strerror(rc));
		return;
	}

	/* Signed 16-bit little-endian format */
	rc=snd_pcm_hw_params_set_format(handle, params, SND_PCM_FORMAT_S16_LE);
	if (rc < 0)
	{
		fprintf(stderr, "ALSA: Error:snd_pcm_hw_params_set_format %s\n", snd_strerror(rc));
		return;
	}

	/* Two channels (stereo) */
	rc=snd_pcm_hw_params_set_channels(handle, params, 2);
	if (rc < 0)
	{
		fprintf(stderr, "ALSA: Error:snd_pcm_hw_params_set_channels %s\n", snd_strerror(rc));
		return;
	}

	/* 44100 bits/second sampling rate (CD quality) */
	val = 44100;
	rc=snd_pcm_hw_params_set_rate_near(handle, params, &val, &dir);
	if (rc < 0)
	{
		fprintf(stderr, "ALSA: Error:snd_pcm_hw_params_set_rate_near %s\n", snd_strerror(rc));
		return;
	}

	/* Set period size to settings.aica.BufferSize frames. */
	period_size = settings.aica.BufferSize;
	rc=snd_pcm_hw_params_set_period_size_near(handle, params, &period_size, &dir);
	if (rc < 0)
	{
		fprintf(stderr, "ALSA: Error:snd_pcm_hw_params_set_buffer_size_near %s\n", snd_strerror(rc));
		return;
	}
	else
	{
		printf("ALSA: period size set to %ld\n", period_size);
	}

	buffer_size = (44100 * 100 /* settings.omx.Audio_Latency */ / 1000 / period_size + 1) * period_size;
	rc=snd_pcm_hw_params_set_buffer_size_near(handle, params, &buffer_size);
	if (rc < 0)
	{
		fprintf(stderr, "ALSA: Error:snd_pcm_hw_params_set_buffer_size_near %s\n", snd_strerror(rc));
		return;
	}
	else
	{
		printf("ALSA: buffer size set to %ld\n", buffer_size);
	}

	/* Write the parameters to the driver */
	rc = snd_pcm_hw_params(handle, params);
	if (rc < 0)
	{
		fprintf(stderr, "ALSA: Unable to set hw parameters: %s\n", snd_strerror(rc));
		return;
	}
}
Пример #21
0
/* Open and init the default recording device. */
void audioInit(void)
{
	int rc;
	int size;
	snd_pcm_hw_params_t *params;
	unsigned int val;
	int dir = 0;

	/* Open PCM device for recording (capture). */
	rc = snd_pcm_open(&sound.handle, getenvDefault(SOUND_DEVICE_ENV,
	                                               SOUND_DEVICE),
	                  SND_PCM_STREAM_CAPTURE, 0);
	if (rc < 0)
	{
		fprintf(stderr, "unable to open pcm device: %s\n", snd_strerror(rc));
		exit(EXIT_FAILURE);
	}

	/* Allocate a hardware parameters object. */
	snd_pcm_hw_params_alloca(&params);

	/* Fill it in with default values. */
	snd_pcm_hw_params_any(sound.handle, params);

	/* Set the desired hardware parameters. */

	/* Interleaved mode. */
	snd_pcm_hw_params_set_access(sound.handle, params,
	                             SND_PCM_ACCESS_RW_INTERLEAVED);

	/* Signed 16-bit little-endian format. */
	snd_pcm_hw_params_set_format(sound.handle, params,
	                             SND_PCM_FORMAT_S16_LE);

	/* One channel (mono). */
	snd_pcm_hw_params_set_channels(sound.handle, params, 1);

	/* 44100 bits/second sampling rate (CD quality). */
	val = SOUND_RATE;
	snd_pcm_hw_params_set_rate_near(sound.handle, params, &val, &dir);

	/* Set period size. It's best to set this to the same value as
	 * SOUND_SAMPLES_PER_TURN. A lower value would generate more
	 * hardware interrupts and thus a lower latency but that's of no use
	 * since we have to wait for an amount of SOUND_SAMPLES_PER_TURN
	 * samples anyway. */
	snd_pcm_uframes_t frames = SOUND_SAMPLES_PER_TURN;
	snd_pcm_hw_params_set_period_size_near(sound.handle, params,
	                                       &frames, &dir);

	/* Write the parameters to the driver. */
	rc = snd_pcm_hw_params(sound.handle, params);
	if (rc < 0)
	{
		fprintf(stderr, "unable to set hw parameters: %s\n",
		        snd_strerror(rc));
		exit(EXIT_FAILURE);
	}

	/* Acquire n frames per turn. */
	sound.bufferSizeFrames = SOUND_SAMPLES_PER_TURN;
	size = sound.bufferSizeFrames * 2;  /* 2 bytes/sample, 1 channel */

	/* Initialize the buffer. */
	sound.buffer = (char *)malloc(size);
	sound.bufferLast = (char *)malloc(size);
	sound.bufferFill = 0;
	sound.bufferReady = 0;

	/* Try to switch to non-blocking mode for reading. If that fails,
	 * print a warning and continue in blocking mode. */
	rc = snd_pcm_nonblock(sound.handle, 1);
	if (rc < 0)
	{
		fprintf(stderr, "Could not switch to non-blocking mode: %s\n",
		        snd_strerror(rc));
	}

	/* Prepare in audioRead() for the first time. */
	sound.reprepare = 1;
}
Пример #22
0
static bool set_snd_pcm_hw_params(snd_pcm_t *snd, snd_pcm_hw_params_t *params, snd_pcm_format_t fmt, unsigned &channels, unsigned &sample_rate, unsigned &delay_us)
{
	const bool ok = !snd_pcm_hw_params_set_access(snd, params, SND_PCM_ACCESS_RW_INTERLEAVED) && !snd_pcm_hw_params_set_format(snd, params, fmt) && !snd_pcm_hw_params_set_channels_near(snd, params, &channels) && !snd_pcm_hw_params_set_rate_near(snd, params, &sample_rate, NULL);
	if (ok)
	{
		unsigned period_us = delay_us >> 2;
		return (!snd_pcm_hw_params_set_buffer_time_near(snd, params, &delay_us, NULL) && !snd_pcm_hw_params_set_period_time_near(snd, params, &period_us, NULL)) || (!snd_pcm_hw_params_set_period_time_near(snd, params, &period_us, NULL) && !snd_pcm_hw_params_set_buffer_time_near(snd, params, &delay_us, NULL));
	}
	return false;
}
Пример #23
0
static snd_pcm_t *
alsa_open (int channels, unsigned samplerate, int realtime)
{	const char * device = "default" ;
	snd_pcm_t *alsa_dev = NULL ;
	snd_pcm_hw_params_t *hw_params ;
	snd_pcm_uframes_t buffer_size ;
	snd_pcm_uframes_t alsa_period_size, alsa_buffer_frames ;
	snd_pcm_sw_params_t *sw_params ;

	int err ;

	if (realtime)
	{	alsa_period_size = 256 ;
		alsa_buffer_frames = 3 * alsa_period_size ;
		}
	else
	{	alsa_period_size = 1024 ;
		alsa_buffer_frames = 4 * alsa_period_size ;
		} ;

	if ((err = snd_pcm_open (&alsa_dev, device, SND_PCM_STREAM_PLAYBACK, 0)) < 0)
	{	fprintf (stderr, "cannot open audio device \"%s\" (%s)\n", device, snd_strerror (err)) ;
		goto catch_error ;
		} ;

	snd_pcm_nonblock (alsa_dev, 0) ;

	if ((err = snd_pcm_hw_params_malloc (&hw_params)) < 0)
	{	fprintf (stderr, "cannot allocate hardware parameter structure (%s)\n", snd_strerror (err)) ;
		goto catch_error ;
		} ;

	if ((err = snd_pcm_hw_params_any (alsa_dev, hw_params)) < 0)
	{	fprintf (stderr, "cannot initialize hardware parameter structure (%s)\n", snd_strerror (err)) ;
		goto catch_error ;
		} ;

	if ((err = snd_pcm_hw_params_set_access (alsa_dev, hw_params, SND_PCM_ACCESS_RW_INTERLEAVED)) < 0)
	{	fprintf (stderr, "cannot set access type (%s)\n", snd_strerror (err)) ;
		goto catch_error ;
		} ;

	if ((err = snd_pcm_hw_params_set_format (alsa_dev, hw_params, SND_PCM_FORMAT_FLOAT)) < 0)
	{	fprintf (stderr, "cannot set sample format (%s)\n", snd_strerror (err)) ;
		goto catch_error ;
		} ;

	if ((err = snd_pcm_hw_params_set_rate_near (alsa_dev, hw_params, &samplerate, 0)) < 0)
	{	fprintf (stderr, "cannot set sample rate (%s)\n", snd_strerror (err)) ;
		goto catch_error ;
		} ;

	if ((err = snd_pcm_hw_params_set_channels (alsa_dev, hw_params, channels)) < 0)
	{	fprintf (stderr, "cannot set channel count (%s)\n", snd_strerror (err)) ;
		goto catch_error ;
		} ;

	if ((err = snd_pcm_hw_params_set_buffer_size_near (alsa_dev, hw_params, &alsa_buffer_frames)) < 0)
	{	fprintf (stderr, "cannot set buffer size (%s)\n", snd_strerror (err)) ;
		goto catch_error ;
		} ;

	if ((err = snd_pcm_hw_params_set_period_size_near (alsa_dev, hw_params, &alsa_period_size, 0)) < 0)
	{	fprintf (stderr, "cannot set period size (%s)\n", snd_strerror (err)) ;
		goto catch_error ;
		} ;

	if ((err = snd_pcm_hw_params (alsa_dev, hw_params)) < 0)
	{	fprintf (stderr, "cannot set parameters (%s)\n", snd_strerror (err)) ;
		goto catch_error ;
		} ;

	/* extra check: if we have only one period, this code won't work */
	snd_pcm_hw_params_get_period_size (hw_params, &alsa_period_size, 0) ;
	snd_pcm_hw_params_get_buffer_size (hw_params, &buffer_size) ;
	if (alsa_period_size == buffer_size)
	{	fprintf (stderr, "Can't use period equal to buffer size (%lu == %lu)", alsa_period_size, buffer_size) ;
		goto catch_error ;
		} ;

	snd_pcm_hw_params_free (hw_params) ;

	if ((err = snd_pcm_sw_params_malloc (&sw_params)) != 0)
	{	fprintf (stderr, "%s: snd_pcm_sw_params_malloc: %s", __func__, snd_strerror (err)) ;
		goto catch_error ;
		} ;

	if ((err = snd_pcm_sw_params_current (alsa_dev, sw_params)) != 0)
	{	fprintf (stderr, "%s: snd_pcm_sw_params_current: %s", __func__, snd_strerror (err)) ;
		goto catch_error ;
		} ;

	/* note: set start threshold to delay start until the ring buffer is full */
	snd_pcm_sw_params_current (alsa_dev, sw_params) ;

	if ((err = snd_pcm_sw_params_set_start_threshold (alsa_dev, sw_params, buffer_size)) < 0)
	{	fprintf (stderr, "cannot set start threshold (%s)\n", snd_strerror (err)) ;
		goto catch_error ;
		} ;

	if ((err = snd_pcm_sw_params (alsa_dev, sw_params)) != 0)
	{	fprintf (stderr, "%s: snd_pcm_sw_params: %s", __func__, snd_strerror (err)) ;
		goto catch_error ;
		} ;

	snd_pcm_sw_params_free (sw_params) ;

	snd_pcm_reset (alsa_dev) ;

catch_error :

	if (err < 0 && alsa_dev != NULL)
	{	snd_pcm_close (alsa_dev) ;
		return NULL ;
		} ;

	return alsa_dev ;
} /* alsa_open */
Пример #24
0
// alsa	      
	main (int argc, char *argv[])
	{
		int i;
		int err;
		short buf[128];
		snd_pcm_t *playback_handle;
		snd_pcm_hw_params_t *hw_params;
	
		if ((err = snd_pcm_open (&playback_handle, argv[1], SND_PCM_STREAM_PLAYBACK, 0)) < 0) {
			fprintf (stderr, "cannot open audio device %s (%s)\n", 
				 argv[1],
				 snd_strerror (err));
			exit (1);
		}
		   
		if ((err = snd_pcm_hw_params_malloc (&hw_params)) < 0) {
			fprintf (stderr, "cannot allocate hardware parameter structure (%s)\n",
				 snd_strerror (err));
			exit (1);
		}
				 
		if ((err = snd_pcm_hw_params_any (playback_handle, hw_params)) < 0) {
			fprintf (stderr, "cannot initialize hardware parameter structure (%s)\n",
				 snd_strerror (err));
			exit (1);
		}
	
		if ((err = snd_pcm_hw_params_set_access (playback_handle, hw_params, SND_PCM_ACCESS_RW_INTERLEAVED)) < 0) {
			fprintf (stderr, "cannot set access type (%s)\n",
				 snd_strerror (err));
			exit (1);
		}
	
		if ((err = snd_pcm_hw_params_set_format (playback_handle, hw_params, SND_PCM_FORMAT_S16_LE)) < 0) {
			fprintf (stderr, "cannot set sample format (%s)\n",
				 snd_strerror (err));
			exit (1);
		}
	
		if ((err = snd_pcm_hw_params_set_rate_near (playback_handle, hw_params, 44100, 0)) < 0) {
			fprintf (stderr, "cannot set sample rate (%s)\n",
				 snd_strerror (err));
			exit (1);
		}
	
		if ((err = snd_pcm_hw_params_set_channels (playback_handle, hw_params, 2)) < 0) {
			fprintf (stderr, "cannot set channel count (%s)\n",
				 snd_strerror (err));
			exit (1);
		}
	
		if ((err = snd_pcm_hw_params (playback_handle, hw_params)) < 0) {
			fprintf (stderr, "cannot set parameters (%s)\n",
				 snd_strerror (err));
			exit (1);
		}
	
		snd_pcm_hw_params_free (hw_params);
	
		if ((err = snd_pcm_prepare (playback_handle)) < 0) {
			fprintf (stderr, "cannot prepare audio interface for use (%s)\n",
				 snd_strerror (err));
			exit (1);
		}
	
		for (i = 0; i < 10; ++i) {
			if ((err = snd_pcm_writei (playback_handle, buf, 128)) != 128) {
				fprintf (stderr, "write to audio interface failed (%s)\n",
					 snd_strerror (err));
				exit (1);
			}
		}
	
		snd_pcm_close (playback_handle);
		exit (0);
	}
Пример #25
0
int main( int argc, char *argv[] )
{
    struct structArgs cmdArgs;
	unsigned int val, val2;
	int dir;
    int errNum;
	cmdArgs.card = 0;		// Default card.
	cmdArgs.control = 1;	// Default control.


    // ************************************************************************
    //  ALSA control elements.
    // ************************************************************************
    snd_pcm_t *pcmp;
    snd_pcm_hw_params_t *params;
//	snd_pcm_stream_t stream = SND_PCM_STREAM_PLAYBACK;
	snd_pcm_stream_t stream = SND_PCM_STREAM_CAPTURE;
    snd_pcm_uframes_t frames;


    // ************************************************************************
    //  Get command line parameters.
    // ************************************************************************
    argp_parse( &argp, argc, argv, 0, 0, &cmdArgs );

    printf( "Card = %i\n", cmdArgs.card );
    printf( "Control = %i\n", cmdArgs.control );
    sprintf( cmdArgs.deviceID, "hw:%i,%i", cmdArgs.card, cmdArgs.control );
	printf( "Using device %s :", cmdArgs.deviceID );

    /* Allocate a hardware parameters object. */
    if ( snd_pcm_hw_params_alloca( &params ) < 0 )
    {
    	fprintf( stderr, "Unable to allocate.\n" );
    	return -1;
   	}
    /* Open PCM device for playback. */
//    if ( snd_pcm_open( &pcmp, cmdArgs.deviceID, stream, 0 ) < 0 )
//    {
//        fprintf( stderr, "Unable to open pcm device.\n" );
//    	return -1;
//    }
    /* Fill it in with default values. */
//    if ( snd_pcm_hw_params_any( pcmp, params ) < 0
//    {
//    	fprintf( stderr, "Unable to set default values.\n" );
//    	return -1;
//    }
    /* Interleaved mode */
//    snd_pcm_hw_params_set_access( pcmp, params,
//    		SND_PCM_ACCESS_RW_INTERLEAVED );

    /* Signed 16-bit little-endian format */
    snd_pcm_hw_params_set_format( pcmp, params,
        	SND_PCM_FORMAT_S16_LE );

    /* Two channels (stereo) */
    snd_pcm_hw_params_set_channels( pcmp, params, 2 );

    /* 44100 bits/second sampling rate (CD quality) */
    val = 44100;
    snd_pcm_hw_params_set_rate_near( pcmp, params, &val, &dir );

    /* Write the parameters to the driver */
    errNum = snd_pcm_hw_params( pcmp, params );
    if ( errNum < 0 )
    {
        fprintf(stderr, "unable to set hw parameters: %s\n",
            snd_strerror( errNum ));
        exit( 1 );
    }

    /* Display information about the PCM interface */

    printf( "PCM handle name = '%s'\n", snd_pcm_name( pcmp ));

    printf("PCM state = %s\n", snd_pcm_state_name( snd_pcm_state( pcmp )));

    snd_pcm_hw_params_get_access( params, ( snd_pcm_access_t * ) &val );
    printf( "access type = %s\n",
        snd_pcm_access_name(( snd_pcm_access_t ) val ));

    snd_pcm_hw_params_get_format( params, ( snd_pcm_format_t * ) &val );
    printf( "format = '%s' (%s)\n",
        snd_pcm_format_name(( snd_pcm_format_t ) val ),
        snd_pcm_format_description(( snd_pcm_format_t ) val ));

    snd_pcm_hw_params_get_subformat( params,
        ( snd_pcm_subformat_t * ) &val );
    printf( "subformat = '%s' (%s)\n",
        snd_pcm_subformat_name(( snd_pcm_subformat_t ) val ),
        snd_pcm_subformat_description((
        snd_pcm_subformat_t ) val ));

    snd_pcm_hw_params_get_channels( params, &val );
    printf( "channels = %d\n", val );

    snd_pcm_hw_params_get_rate( params, &val, &dir );
    printf( "rate = %d bps\n", val );

    snd_pcm_hw_params_get_period_time( params, &val, &dir );
    printf( "period time = %d us\n", val );

    snd_pcm_hw_params_get_period_size( params, &frames, &dir );
    printf( "period size = %d frames\n", ( int ) frames );

    snd_pcm_hw_params_get_buffer_time( params, &val, &dir );
    printf( "buffer time = %d us\n", val );

    snd_pcm_hw_params_get_buffer_size( params,
        ( snd_pcm_uframes_t * ) &val );
    printf( "buffer size = %d frames\n", val );

    snd_pcm_hw_params_get_periods( params, &val, &dir );
    printf( "periods per buffer = %d frames\n", val );

    snd_pcm_hw_params_get_rate_numden( params, &val, &val2 );
    printf( "exact rate = %d/%d bps\n", val, val2 );

    val = snd_pcm_hw_params_get_sbits( params );
    printf( "significant bits = %d\n", val );

//    snd_pcm_hw_params_get_tick_time( params, &val, &dir );
//    printf( "tick time = %d us\n", val );

    val = snd_pcm_hw_params_is_batch( params );
    printf( "is batch = %d\n", val );

    val = snd_pcm_hw_params_is_block_transfer( params );
    printf( "is block transfer = %d\n", val );

    val = snd_pcm_hw_params_is_double( params );
    printf( "is double = %d\n", val );

    val = snd_pcm_hw_params_is_half_duplex( params );
    printf( "is half duplex = %d\n", val );

    val = snd_pcm_hw_params_is_joint_duplex( params );
    printf( "is joint duplex = %d\n", val );

    val = snd_pcm_hw_params_can_overrange( params );
    printf( "can overrange = %d\n", val );

    val = snd_pcm_hw_params_can_mmap_sample_resolution( params );
    printf( "can mmap = %d\n", val );

    val = snd_pcm_hw_params_can_pause( params );
    printf( "can pause = %d\n", val );

    val = snd_pcm_hw_params_can_resume( params );
    printf( "can resume = %d\n", val );

    val = snd_pcm_hw_params_can_sync_start( params );
    printf( "can sync start = %d\n", val );
    snd_pcm_close( pcmp );

    return 0;
}
Пример #26
0
static void* sound_thread(void* context)
{
    struct SPU* c = (struct SPU*)context;
    int div;
    snd_pcm_t* snd;
    snd_pcm_hw_params_t* hwp;
    int rate = c->sampling;
    int periods = 3;
    snd_pcm_hw_params_alloca(&hwp);
    if (snd_pcm_open(&snd, "default", SND_PCM_STREAM_PLAYBACK, 0) < 0) {
        return NULL;
    }
    if (snd_pcm_hw_params_any(snd, hwp) < 0) {
        return NULL;
    }
    div = c->bit / 8;
    switch (c->bit) {
        case 8:
            if (snd_pcm_hw_params_set_format(snd, hwp, SND_PCM_FORMAT_U8) < 0) {
                return NULL;
            }
            break;
        case 16:
            if (snd_pcm_hw_params_set_format(snd, hwp, SND_PCM_FORMAT_S16_LE) < 0) {
                return NULL;
            }
            break;
        case 24:
            if (snd_pcm_hw_params_set_format(snd, hwp, SND_PCM_FORMAT_S24_LE) < 0) {
                return NULL;
            }
            break;
        case 32:
            if (snd_pcm_hw_params_set_format(snd, hwp, SND_PCM_FORMAT_S32_LE) < 0) {
                return NULL;
            }
            break;
        default:
            return NULL;
    }
    if (snd_pcm_hw_params_set_rate_near(snd, hwp, &rate, 0) < 0) {
        return NULL;
    }
    if (rate != SAMPLE_RATE) {
        return NULL;
    }
    if (snd_pcm_hw_params_set_channels(snd, hwp, c->ch) < 0) {
        return NULL;
    }
    if (snd_pcm_hw_params_set_periods(snd, hwp, periods, 0) < 0) {
        return NULL;
    }
    if (snd_pcm_hw_params_set_buffer_size(snd, hwp, (periods * c->size) / 4) < 0) {
        return NULL;
    }
    if (snd_pcm_hw_params(snd, hwp) < 0) {
        return NULL;
    }
    while (c->alive) {
        c->callback(c->buffer, c->size);
        while (c->alive) {
            if (snd_pcm_writei(snd, c->buffer, c->size / div) < 0) {
                snd_pcm_prepare(snd);
            } else {
                break;
            }
        }
    }
    snd_pcm_drain(snd);
    snd_pcm_close(snd);
    return NULL;
}
Пример #27
0
static int alsaio_setup(t_alsa_dev *dev, int out, int *channels, int *rate,
                        int nfrags, int frag_size)
{
    int bufsizeforthis, err;
    snd_pcm_hw_params_t* hw_params;
    unsigned int tmp_uint;
    snd_pcm_uframes_t tmp_snd_pcm_uframes;

    if (sys_verbose)
    {
        if (out)
            post("configuring sound output...");
        else post("configuring sound input...");
    }

    /* set hardware parameters... */
    snd_pcm_hw_params_alloca(&hw_params);

    /* get the default params */
    err = snd_pcm_hw_params_any(dev->a_handle, hw_params);
    check_error(err, "snd_pcm_hw_params_any");

    /* try to set interleaved access */
    err = snd_pcm_hw_params_set_access(dev->a_handle,
                                       hw_params, SND_PCM_ACCESS_RW_INTERLEAVED);
    if (err < 0)
        return (-1);
    check_error(err, "snd_pcm_hw_params_set_access");
#if 0       /* enable this to print out which formats are available */
    {
        int i;
        for (i = 0; i <= SND_PCM_FORMAT_LAST; i++)
            fprintf(stderr, "%d -> %d\n",
                    i, snd_pcm_hw_params_test_format(dev->a_handle, hw_params, i));
    }
#endif
    /* Try to set 32 bit format first */
    err = snd_pcm_hw_params_set_format(dev->a_handle,
                                       hw_params, SND_PCM_FORMAT_S32);
    if (err < 0)
    {
        /* fprintf(stderr,
            "PD-ALSA: 32 bit format not available - trying 24\n"); */
        err = snd_pcm_hw_params_set_format(dev->a_handle, hw_params,
                                           SND_PCM_FORMAT_S24_3LE);
        if (err < 0)
        {
            /* fprintf(stderr,
                "PD-ALSA: 32/24 bit format not available - using 16\n"); */
            err = snd_pcm_hw_params_set_format(dev->a_handle, hw_params,
                                               SND_PCM_FORMAT_S16);
            check_error(err, "snd_pcm_hw_params_set_format");
            dev->a_sampwidth = 2;
        }
        else dev->a_sampwidth = 3;
    }
    else dev->a_sampwidth = 4;

    if (sys_verbose)
        post("Sample width set to %d bytes", dev->a_sampwidth);

    /* set the subformat */
    err = snd_pcm_hw_params_set_subformat(dev->a_handle,
                                          hw_params, SND_PCM_SUBFORMAT_STD);
    check_error(err, "snd_pcm_hw_params_set_subformat");

    /* set the number of channels */
    tmp_uint = *channels;
    err = snd_pcm_hw_params_set_channels_min(dev->a_handle,
            hw_params, &tmp_uint);
    check_error(err, "snd_pcm_hw_params_set_channels");
    if (tmp_uint != (unsigned)*channels)
        post("ALSA: set %s channels to %d", (out?"output":"input"), tmp_uint);
    *channels = tmp_uint;
    dev->a_channels = *channels;

    /* set the sampling rate */
    err = snd_pcm_hw_params_set_rate_min(dev->a_handle, hw_params,
                                         (unsigned int *)rate, 0);
    check_error(err, "snd_pcm_hw_params_set_rate_min (input)");
#if 0
    err = snd_pcm_hw_params_get_rate(hw_params, &subunitdir);
    post("input sample rate %d", err);
#endif

    /* post("frag size %d, nfrags %d", frag_size, nfrags); */
    /* set "period size" */
#ifdef ALSAAPI9
    err = snd_pcm_hw_params_set_period_size_near(dev->a_handle,
            hw_params, (snd_pcm_uframes_t)frag_size, 0);
#else
    tmp_snd_pcm_uframes = frag_size;
    err = snd_pcm_hw_params_set_period_size_near(dev->a_handle,
            hw_params, &tmp_snd_pcm_uframes, 0);
#endif
    check_error(err, "snd_pcm_hw_params_set_period_size_near (input)");

    /* set the buffer size */
#ifdef ALSAAPI9
    err = snd_pcm_hw_params_set_buffer_size_near(dev->a_handle,
            hw_params, nfrags * frag_size);
#else
    tmp_snd_pcm_uframes = nfrags * frag_size;
    err = snd_pcm_hw_params_set_buffer_size_near(dev->a_handle,
            hw_params, &tmp_snd_pcm_uframes);
#endif
    check_error(err, "snd_pcm_hw_params_set_buffer_size_near (input)");

    err = snd_pcm_hw_params(dev->a_handle, hw_params);
    check_error(err, "snd_pcm_hw_params (input)");

    /* set up the buffer */
    bufsizeforthis = DEFDACBLKSIZE * dev->a_sampwidth * *channels;
    if (alsa_snd_buf)
    {
        if (alsa_snd_bufsize < bufsizeforthis)
        {
            if (!(alsa_snd_buf = realloc(alsa_snd_buf, bufsizeforthis)))
            {
                post("out of memory");
                return (0);
            }
            memset(alsa_snd_buf, 0, bufsizeforthis);
            alsa_snd_bufsize = bufsizeforthis;
        }
    }
    else
    {
        if (!(alsa_snd_buf = (void *)malloc(bufsizeforthis)))
        {
            post("out of memory");
            return (0);
        }
        memset(alsa_snd_buf, 0, bufsizeforthis);
        alsa_snd_bufsize = bufsizeforthis;
    }
    return (1);
}
Пример #28
0
int sndout_alsa_start(int rate_, int stereo)
{
	snd_pcm_hw_params_t *hwparams = NULL;
	unsigned int rate = rate_;
	int samples, shift;
	int ret;

	samples = rate * 40 / 1000;
	for (shift = 8; (1 << shift) < samples; shift++)
		;
	period_size = 1 << shift;
	buffer_size = 8 * period_size;

	snd_pcm_hw_params_alloca(&hwparams);

	ret  = snd_pcm_hw_params_any(handle, hwparams);
	ret |= snd_pcm_hw_params_set_access(handle, hwparams, SND_PCM_ACCESS_RW_INTERLEAVED);
	ret |= snd_pcm_hw_params_set_format(handle, hwparams, SND_PCM_FORMAT_S16_LE);
	ret |= snd_pcm_hw_params_set_channels(handle, hwparams, stereo ? 2 : 1);
	ret |= snd_pcm_hw_params_set_rate_near(handle, hwparams, &rate, 0);
	ret |= snd_pcm_hw_params_set_buffer_size_near(handle, hwparams, &buffer_size);
	ret |= snd_pcm_hw_params_set_period_size_near(handle, hwparams, &period_size, NULL);

	if (ret != 0) {
		fprintf(stderr, PFX "failed to set hwparams\n");
		goto fail;
	}

	ret = snd_pcm_hw_params(handle, hwparams);
	if (ret != 0) {
		fprintf(stderr, PFX "failed to apply hwparams: %d\n", ret);
		goto fail;
	}

	snd_pcm_hw_params_get_buffer_size(hwparams, &buffer_size);
	snd_pcm_hw_params_get_period_size(hwparams, &period_size, NULL);
	snd_pcm_hw_params_get_channels(hwparams, &channels);

	silent_period = realloc(silent_period, period_size * 2 * channels);
	if (silent_period != NULL)
		memset(silent_period, 0, period_size * 2 * channels);

	ret = snd_pcm_prepare(handle);
	if (ret != 0) {
		fprintf(stderr, PFX "snd_pcm_prepare failed: %d\n", ret);
		goto fail;
	}

	ret = snd_pcm_start(handle);
	if (ret != 0) {
		fprintf(stderr, PFX "snd_pcm_start failed: %d\n", ret);
		goto fail;
	}

	failure_counter = 0;

	return 0;

fail:
	// to flush out redirected logs
	fflush(stdout);
	fflush(stderr);
	return -1;
}
Пример #29
0
bool CAESinkALSA::InitializeHW(AEAudioFormat &format)
{
  snd_pcm_hw_params_t *hw_params;

  snd_pcm_hw_params_alloca(&hw_params);
  memset(hw_params, 0, snd_pcm_hw_params_sizeof());

  snd_pcm_hw_params_any(m_pcm, hw_params);
  snd_pcm_hw_params_set_access(m_pcm, hw_params, SND_PCM_ACCESS_RW_INTERLEAVED);

  unsigned int sampleRate   = format.m_sampleRate;
  unsigned int channelCount = format.m_channelLayout.Count();
  snd_pcm_hw_params_set_rate_near    (m_pcm, hw_params, &sampleRate, NULL);
  snd_pcm_hw_params_set_channels_near(m_pcm, hw_params, &channelCount);

  /* ensure we opened X channels or more */
  if (format.m_channelLayout.Count() > channelCount)
  {
    CLog::Log(LOGERROR, "CAESinkALSA::InitializeHW - Unable to open the required number of channels");
    return false;
  }

  /* update the channelLayout to what we managed to open */
  format.m_channelLayout.Reset();
  for (unsigned int i = 0; i < channelCount; ++i)
    format.m_channelLayout += ALSAChannelMap[i];

  snd_pcm_format_t fmt = AEFormatToALSAFormat(format.m_dataFormat);
  if (fmt == SND_PCM_FORMAT_UNKNOWN)
  {
    /* if we dont support the requested format, fallback to float */
    format.m_dataFormat = AE_FMT_FLOAT;
    fmt                 = SND_PCM_FORMAT_FLOAT;
  }

  /* try the data format */
  if (snd_pcm_hw_params_set_format(m_pcm, hw_params, fmt) < 0)
  {
    /* if the chosen format is not supported, try each one in decending order */
    CLog::Log(LOGINFO, "CAESinkALSA::InitializeHW - Your hardware does not support %s, trying other formats", CAEUtil::DataFormatToStr(format.m_dataFormat));
    for (enum AEDataFormat i = AE_FMT_MAX; i > AE_FMT_INVALID; i = (enum AEDataFormat)((int)i - 1))
    {
      if (AE_IS_RAW(i) || i == AE_FMT_MAX)
        continue;

      if (m_passthrough && i != AE_FMT_S16BE && i != AE_FMT_S16LE)
	continue;

      fmt = AEFormatToALSAFormat(i);

      if (fmt == SND_PCM_FORMAT_UNKNOWN || snd_pcm_hw_params_set_format(m_pcm, hw_params, fmt) < 0)
      {
        fmt = SND_PCM_FORMAT_UNKNOWN;
        continue;
      }

      int fmtBits = CAEUtil::DataFormatToBits(i);
      int bits    = snd_pcm_hw_params_get_sbits(hw_params);
      if (bits != fmtBits)
      {
        /* if we opened in 32bit and only have 24bits, pack into 24 */
        if (fmtBits == 32 && bits == 24)
          i = AE_FMT_S24NE4;
        else
          continue;
      }

      /* record that the format fell back to X */
      format.m_dataFormat = i;
      CLog::Log(LOGINFO, "CAESinkALSA::InitializeHW - Using data format %s", CAEUtil::DataFormatToStr(format.m_dataFormat));
      break;
    }

    /* if we failed to find a valid output format */
    if (fmt == SND_PCM_FORMAT_UNKNOWN)
    {
      CLog::Log(LOGERROR, "CAESinkALSA::InitializeHW - Unable to find a suitable output format");
      return false;
    }
  }

  unsigned int periods;

  snd_pcm_uframes_t periodSize, bufferSize;
  snd_pcm_hw_params_get_buffer_size_max(hw_params, &bufferSize);

  bufferSize  = std::min(bufferSize, (snd_pcm_uframes_t)8192);
  periodSize  = bufferSize / ALSA_PERIODS;
  periods     = ALSA_PERIODS;

  CLog::Log(LOGDEBUG, "CAESinkALSA::InitializeHW - Request: periodSize %lu, periods %u, bufferSize %lu", periodSize, periods, bufferSize);

  /* work on a copy of the hw params */
  snd_pcm_hw_params_t *hw_params_copy;
  snd_pcm_hw_params_alloca(&hw_params_copy);

  /* try to set the buffer size then the period size */
  snd_pcm_hw_params_copy(hw_params_copy, hw_params);
  snd_pcm_hw_params_set_buffer_size_near(m_pcm, hw_params_copy, &bufferSize);
  snd_pcm_hw_params_set_period_size_near(m_pcm, hw_params_copy, &periodSize, NULL);
  snd_pcm_hw_params_set_periods_near    (m_pcm, hw_params_copy, &periods   , NULL);
  if (snd_pcm_hw_params(m_pcm, hw_params_copy) != 0)
  {
    /* try to set the period size then the buffer size */
    snd_pcm_hw_params_copy(hw_params_copy, hw_params);
    snd_pcm_hw_params_set_period_size_near(m_pcm, hw_params_copy, &periodSize, NULL);
    snd_pcm_hw_params_set_buffer_size_near(m_pcm, hw_params_copy, &bufferSize);
    snd_pcm_hw_params_set_periods_near    (m_pcm, hw_params_copy, &periods   , NULL);
    if (snd_pcm_hw_params(m_pcm, hw_params_copy) != 0)
    {
      /* try to just set the buffer size */
      snd_pcm_hw_params_copy(hw_params_copy, hw_params);
      snd_pcm_hw_params_set_buffer_size_near(m_pcm, hw_params_copy, &bufferSize);
      snd_pcm_hw_params_set_periods_near    (m_pcm, hw_params_copy, &periods   , NULL);
      if (snd_pcm_hw_params(m_pcm, hw_params_copy) != 0)
      {
        /* try to just set the period size */
        snd_pcm_hw_params_copy(hw_params_copy, hw_params);
        snd_pcm_hw_params_set_period_size_near(m_pcm, hw_params_copy, &periodSize, NULL);
        snd_pcm_hw_params_set_periods_near    (m_pcm, hw_params_copy, &periods   , NULL);
        if (snd_pcm_hw_params(m_pcm, hw_params_copy) != 0)
        {
          CLog::Log(LOGERROR, "CAESinkALSA::InitializeHW - Failed to set the parameters");
          return false;
        }
      }
    }
  }

  snd_pcm_hw_params_get_period_size(hw_params_copy, &periodSize, NULL);
  snd_pcm_hw_params_get_buffer_size(hw_params_copy, &bufferSize);
  

  CLog::Log(LOGDEBUG, "CAESinkALSA::InitializeHW - Got: periodSize %lu, periods %u, bufferSize %lu", periodSize, periods, bufferSize);

  /* set the format parameters */
  format.m_sampleRate   = sampleRate;
  format.m_frames       = periodSize;
  format.m_frameSamples = periodSize * format.m_channelLayout.Count();
  format.m_frameSize    = snd_pcm_frames_to_bytes(m_pcm, 1);

  m_bufferSize = (unsigned int)bufferSize;
  m_timeout    = std::ceil((double)(bufferSize * 1000) / (double)sampleRate);

  CLog::Log(LOGDEBUG, "CAESinkALSA::InitializeHW - Setting timeout to %d ms", m_timeout);

  return true;
}
Пример #30
0
static int alsa_init(const char *param, int *speed, int *fragsize, int *fragnr, int *channels)
{
    int err, dir;
    unsigned int rate, periods;
    snd_pcm_uframes_t period_size;
    snd_pcm_hw_params_t *hwparams;

    if (!param) {
        param = "default";
    }

    snd_pcm_hw_params_alloca(&hwparams);

    if ((err = snd_pcm_open(&handle, param, SND_PCM_STREAM_PLAYBACK, 0)) < 0) {
        log_message(LOG_DEFAULT, "Playback open error for '%s': %s", param,
                    snd_strerror(err));
        return 1;
    }

    if ((err = snd_pcm_hw_params_any(handle, hwparams)) < 0) {
        log_message(LOG_DEFAULT, "Broken configuration for playback: no configurations available: %s", snd_strerror(err));
        goto fail;
    }

    if ((err = snd_pcm_hw_params_set_access(handle, hwparams, SND_PCM_ACCESS_RW_INTERLEAVED)) < 0) {
        log_message(LOG_DEFAULT, "Access type not available for playback: %s", snd_strerror(err));
        goto fail;
    }

    if ((err = snd_pcm_hw_params_set_format(handle, hwparams, SND_PCM_FORMAT_S16)) < 0) {
        log_message(LOG_DEFAULT, "Sample format not available for playback: %s", snd_strerror(err));
        goto fail;
    }

    if ((err = snd_pcm_hw_params_set_channels(handle, hwparams,
                    (unsigned int)*channels)) < 0) {
        log_message(LOG_DEFAULT, "Channels count (%i) not available for playbacks: %s", *channels, snd_strerror(err));
        goto fail;
    }

    rate = (unsigned int)*speed;
    if ((err = snd_pcm_hw_params_set_rate_near(handle, hwparams, &rate, 0)) < 0) {
        log_message(LOG_DEFAULT, "Rate %iHz not available for playback: %s", *speed, snd_strerror(err));
        goto fail;
    }
    if (rate != (unsigned int)*speed) {
        printf("Rate doesn't match (requested %iHz, got %uHz)", *speed, rate);
        *speed = (int)rate;
    }
    /* calculate requested buffer size */
    alsa_bufsize = (*fragsize) * (*fragnr);

    period_size = (snd_pcm_uframes_t)*fragsize;
    dir = 0;
    if ((err = snd_pcm_hw_params_set_period_size_near(handle, hwparams, &period_size, &dir)) < 0) {
        log_message(LOG_DEFAULT, "Unable to set period size %li for playback: %s", period_size, snd_strerror(err));
        goto fail;
    }
    *fragsize = (int)period_size;

    /* number of periods according to the buffer size we wanted, nearest val */
    *fragnr = (alsa_bufsize + *fragsize / 2) / *fragsize;

    periods = (unsigned int)*fragnr;
    dir = 0;
    if ((err = snd_pcm_hw_params_set_periods_near(handle, hwparams, &periods, &dir)) < 0) {
        log_message(LOG_DEFAULT, "Unable to set periods %i for playback: %s", periods, snd_strerror(err));
        goto fail;
    }
    *fragnr = (int)periods;

    alsa_can_pause = snd_pcm_hw_params_can_pause(hwparams);

    if ((err = snd_pcm_hw_params(handle, hwparams)) < 0) {
        log_message(LOG_DEFAULT, "Unable to set hw params for playback: %s", snd_strerror(err));
        goto fail;
    }

    alsa_bufsize = (*fragsize) * (*fragnr);
    alsa_fragsize = *fragsize;
    alsa_channels = *channels;

    return 0;

fail:
    snd_pcm_close(handle);
    handle = NULL;
    return 1;
}