/* Hand over a packet to a device for processing. Return value
USB_RET_ASYNC indicates the processing isn't finished yet, the
driver will call usb_packet_complete() when done processing it. */
int usb_handle_packet(USBDevice *dev, USBPacket *p)
{
int ret;
if (dev == NULL) {
return USB_RET_NODEV;
}
assert(dev == p->ep->dev);
assert(dev->state == USB_STATE_DEFAULT);
usb_packet_check_state(p, USB_PACKET_SETUP);
assert(p->ep != NULL);
if (QTAILQ_EMPTY(&p->ep->queue) || p->ep->pipeline) {
ret = usb_process_one(p);
if (ret == USB_RET_ASYNC) {
usb_packet_set_state(p, USB_PACKET_ASYNC);
QTAILQ_INSERT_TAIL(&p->ep->queue, p, queue);
} else {
p->result = ret;
usb_packet_set_state(p, USB_PACKET_COMPLETE);
}
} else {
ret = USB_RET_ASYNC;
usb_packet_set_state(p, USB_PACKET_QUEUED);
QTAILQ_INSERT_TAIL(&p->ep->queue, p, queue);
}
return ret;
}
/* Notify the controller that an async packet is complete. This should only
be called for packets previously deferred by returning USB_RET_ASYNC from
handle_packet. */
void usb_packet_complete(USBDevice *dev, USBPacket *p)
{
USBEndpoint *ep = p->ep;
int ret;
usb_packet_check_state(p, USB_PACKET_ASYNC);
assert(QTAILQ_FIRST(&ep->queue) == p);
usb_packet_set_state(p, USB_PACKET_COMPLETE);
QTAILQ_REMOVE(&ep->queue, p, queue);
dev->port->ops->complete(dev->port, p);
while (!QTAILQ_EMPTY(&ep->queue)) {
p = QTAILQ_FIRST(&ep->queue);
if (p->state == USB_PACKET_ASYNC) {
break;
}
usb_packet_check_state(p, USB_PACKET_QUEUED);
ret = usb_process_one(p);
if (ret == USB_RET_ASYNC) {
usb_packet_set_state(p, USB_PACKET_ASYNC);
break;
}
p->result = ret;
usb_packet_set_state(p, USB_PACKET_COMPLETE);
QTAILQ_REMOVE(&ep->queue, p, queue);
dev->port->ops->complete(dev->port, p);
}
}
/* Notify the controller that an async packet is complete. This should only
be called for packets previously deferred by returning USB_RET_ASYNC from
handle_packet. */
void usb_packet_complete(USBDevice *dev, USBPacket *p)
{
USBEndpoint *ep = p->ep;
int ret;
usb_packet_check_state(p, USB_PACKET_ASYNC);
usb_packet_complete_one(dev, p);
while (!QTAILQ_EMPTY(&ep->queue)) {
p = QTAILQ_FIRST(&ep->queue);
if (ep->halted) {
/* Empty the queue on a halt */
p->result = USB_RET_REMOVE_FROM_QUEUE;
dev->port->ops->complete(dev->port, p);
continue;
}
if (p->state == USB_PACKET_ASYNC) {
break;
}
usb_packet_check_state(p, USB_PACKET_QUEUED);
ret = usb_process_one(p);
if (ret == USB_RET_ASYNC) {
usb_packet_set_state(p, USB_PACKET_ASYNC);
break;
}
p->result = ret;
usb_packet_complete_one(ep->dev, p);
}
}
/* Hand over a packet to a device for processing. Return value
USB_RET_ASYNC indicates the processing isn't finished yet, the
driver will call usb_packet_complete() when done processing it. */
int usb_handle_packet(USBDevice *dev, USBPacket *p)
{
int ret;
if (dev == NULL) {
return USB_RET_NODEV;
}
assert(dev == p->ep->dev);
assert(dev->state == USB_STATE_DEFAULT);
usb_packet_check_state(p, USB_PACKET_SETUP);
assert(p->ep != NULL);
/* Submitting a new packet clears halt */
if (p->ep->halted) {
assert(QTAILQ_EMPTY(&p->ep->queue));
p->ep->halted = false;
}
if (QTAILQ_EMPTY(&p->ep->queue) || p->ep->pipeline) {
ret = usb_process_one(p);
if (ret == USB_RET_ASYNC) {
assert(p->ep->type != USB_ENDPOINT_XFER_ISOC);
usb_packet_set_state(p, USB_PACKET_ASYNC);
QTAILQ_INSERT_TAIL(&p->ep->queue, p, queue);
} else if (ret == USB_RET_ADD_TO_QUEUE) {
usb_packet_set_state(p, USB_PACKET_QUEUED);
QTAILQ_INSERT_TAIL(&p->ep->queue, p, queue);
ret = USB_RET_ASYNC;
} else {
/*
* When pipelining is enabled usb-devices must always return async,
* otherwise packets can complete out of order!
*/
assert(!p->ep->pipeline || QTAILQ_EMPTY(&p->ep->queue));
if (ret != USB_RET_NAK) {
p->result = ret;
usb_packet_set_state(p, USB_PACKET_COMPLETE);
}
}
} else {
ret = USB_RET_ASYNC;
usb_packet_set_state(p, USB_PACKET_QUEUED);
QTAILQ_INSERT_TAIL(&p->ep->queue, p, queue);
}
return ret;
}
void usb_packet_setup(USBPacket *p, int pid, USBEndpoint *ep)
{
assert(!usb_packet_is_inflight(p));
p->pid = pid;
p->ep = ep;
p->result = 0;
qemu_iovec_reset(&p->iov);
usb_packet_set_state(p, USB_PACKET_SETUP);
}
/* Cancel an active packet. The packed must have been deferred by
returning USB_RET_ASYNC from handle_packet, and not yet
completed. */
void usb_cancel_packet(USBPacket * p)
{
bool callback = (p->state == USB_PACKET_ASYNC);
assert(usb_packet_is_inflight(p));
usb_packet_set_state(p, USB_PACKET_CANCELED);
QTAILQ_REMOVE(&p->ep->queue, p, queue);
if (callback) {
usb_device_cancel_packet(p->ep->dev, p);
}
}
void usb_packet_setup(USBPacket *p, int pid, USBEndpoint *ep, uint64_t id)
{
assert(!usb_packet_is_inflight(p));
assert(p->iov.iov != NULL);
p->id = id;
p->pid = pid;
p->ep = ep;
p->result = 0;
p->parameter = 0;
qemu_iovec_reset(&p->iov);
usb_packet_set_state(p, USB_PACKET_SETUP);
}
static void __usb_packet_complete(USBDevice *dev, USBPacket *p)
{
USBEndpoint *ep = p->ep;
assert(p->result != USB_RET_ASYNC && p->result != USB_RET_NAK);
if (p->result < 0) {
ep->halted = true;
}
usb_packet_set_state(p, USB_PACKET_COMPLETE);
QTAILQ_REMOVE(&ep->queue, p, queue);
dev->port->ops->complete(dev->port, p);
}
void usb_packet_complete_one(USBDevice *dev, USBPacket *p)
{
USBEndpoint *ep = p->ep;
assert(QTAILQ_FIRST(&ep->queue) == p);
assert(p->result != USB_RET_ASYNC && p->result != USB_RET_NAK);
if (p->result < 0 || (p->short_not_ok && (p->result < p->iov.size))) {
ep->halted = true;
}
usb_packet_set_state(p, USB_PACKET_COMPLETE);
QTAILQ_REMOVE(&ep->queue, p, queue);
dev->port->ops->complete(dev->port, p);
}
void usb_packet_setup(USBPacket *p, int pid, USBEndpoint *ep, uint64_t id,
bool short_not_ok, bool int_req)
{
assert(!usb_packet_is_inflight(p));
assert(p->iov.iov != NULL);
p->id = id;
p->pid = pid;
p->ep = ep;
p->result = 0;
p->parameter = 0;
p->short_not_ok = short_not_ok;
p->int_req = int_req;
p->combined = NULL;
qemu_iovec_reset(&p->iov);
usb_packet_set_state(p, USB_PACKET_SETUP);
}
/* Notify the controller that an async packet is complete. This should only
be called for packets previously deferred by returning USB_RET_ASYNC from
handle_packet. */
void usb_packet_complete(USBDevice *dev, USBPacket *p)
{
USBEndpoint *ep = p->ep;
int ret;
usb_packet_check_state(p, USB_PACKET_ASYNC);
assert(QTAILQ_FIRST(&ep->queue) == p);
__usb_packet_complete(dev, p);
while (!ep->halted && !QTAILQ_EMPTY(&ep->queue)) {
p = QTAILQ_FIRST(&ep->queue);
if (p->state == USB_PACKET_ASYNC) {
break;
}
usb_packet_check_state(p, USB_PACKET_QUEUED);
ret = usb_process_one(p);
if (ret == USB_RET_ASYNC) {
usb_packet_set_state(p, USB_PACKET_ASYNC);
break;
}
p->result = ret;
__usb_packet_complete(ep->dev, p);
}
}