/* * Function BuildPadShapePolygon * Build the Corner list of the polygonal shape, * depending on shape, extra size (clearance ...) pad and orientation * Note: for Round and oval pads this function is equivalent to * TransformShapeWithClearanceToPolygon, but not for other shapes */ void D_PAD::BuildPadShapePolygon( SHAPE_POLY_SET& aCornerBuffer, wxSize aInflateValue, int aSegmentsPerCircle, double aCorrectionFactor ) const { wxPoint corners[4]; wxPoint PadShapePos = ShapePos(); /* Note: for pad having a shape offset, * the pad position is NOT the shape position */ switch( GetShape() ) { case PAD_SHAPE_CIRCLE: case PAD_SHAPE_OVAL: TransformShapeWithClearanceToPolygon( aCornerBuffer, aInflateValue.x, aSegmentsPerCircle, aCorrectionFactor ); break; case PAD_SHAPE_TRAPEZOID: case PAD_SHAPE_RECT: aCornerBuffer.NewOutline(); BuildPadPolygon( corners, aInflateValue, m_Orient ); for( int ii = 0; ii < 4; ii++ ) { corners[ii] += PadShapePos; // Shift origin to position aCornerBuffer.Append( corners[ii].x, corners[ii].y ); } break; } }
/* * Function BuildPadShapePolygon * Build the Corner list of the polygonal shape, * depending on shape, extra size (clearance ...) pad and orientation * Note: for Round and oval pads this function is equivalent to * TransformShapeWithClearanceToPolygon, but not for other shapes */ void D_PAD::BuildPadShapePolygon( SHAPE_POLY_SET& aCornerBuffer, wxSize aInflateValue, int aError ) const { wxPoint corners[4]; wxPoint padShapePos = ShapePos(); /* Note: for pad having a shape offset, * the pad position is NOT the shape position */ switch( GetShape() ) { case PAD_SHAPE_CIRCLE: case PAD_SHAPE_OVAL: case PAD_SHAPE_ROUNDRECT: case PAD_SHAPE_CHAMFERED_RECT: { // We are using TransformShapeWithClearanceToPolygon to build the shape. // Currently, this method uses only the same inflate value for X and Y dirs. // so because here this is not the case, we use a inflated dummy pad to build // the polygonal shape // TODO: remove this dummy pad when TransformShapeWithClearanceToPolygon will use // a wxSize to inflate the pad size D_PAD dummy( *this ); dummy.SetSize( GetSize() + aInflateValue + aInflateValue ); dummy.TransformShapeWithClearanceToPolygon( aCornerBuffer, 0 ); } break; case PAD_SHAPE_TRAPEZOID: case PAD_SHAPE_RECT: aCornerBuffer.NewOutline(); BuildPadPolygon( corners, aInflateValue, m_Orient ); for( int ii = 0; ii < 4; ii++ ) { corners[ii] += padShapePos; // Shift origin to position aCornerBuffer.Append( corners[ii].x, corners[ii].y ); } break; case PAD_SHAPE_CUSTOM: // for a custom shape, that is in fact a polygon (with holes), we can use only a inflate value. // so use ( aInflateValue.x + aInflateValue.y ) / 2 as polygon inflate value. // (different values for aInflateValue.x and aInflateValue.y has no sense for a custom pad) TransformShapeWithClearanceToPolygon( aCornerBuffer, ( aInflateValue.x + aInflateValue.y ) / 2 ); break; } }
bool D_PAD::HitTest( const wxPoint& aPosition ) { int dx, dy; double dist; wxPoint shape_pos = ReturnShapePos(); wxPoint delta = aPosition - shape_pos; // first test: a test point must be inside a minimum sized bounding circle. int radius = GetBoundingRadius(); if( ( abs( delta.x ) > radius ) || ( abs( delta.y ) > radius ) ) return false; dx = m_Size.x >> 1; // dx also is the radius for rounded pads dy = m_Size.y >> 1; switch( m_PadShape & 0x7F ) { case PAD_CIRCLE: dist = hypot( delta.x, delta.y ); if( KiROUND( dist ) <= dx ) return true; break; case PAD_TRAPEZOID: { wxPoint poly[4]; BuildPadPolygon( poly, wxSize(0,0), 0 ); RotatePoint( &delta, -m_Orient ); return TestPointInsidePolygon( poly, 4, delta ); } default: RotatePoint( &delta, -m_Orient ); if( (abs( delta.x ) <= dx ) && (abs( delta.y ) <= dy) ) return true; break; } return false; }
bool D_PAD::HitTest( const wxPoint& aPosition ) const { int dx, dy; wxPoint shape_pos = ShapePos(); wxPoint delta = aPosition - shape_pos; // first test: a test point must be inside a minimum sized bounding circle. int radius = GetBoundingRadius(); if( ( abs( delta.x ) > radius ) || ( abs( delta.y ) > radius ) ) return false; dx = m_Size.x >> 1; // dx also is the radius for rounded pads dy = m_Size.y >> 1; switch( GetShape() ) { case PAD_SHAPE_CIRCLE: if( KiROUND( EuclideanNorm( delta ) ) <= dx ) return true; break; case PAD_SHAPE_TRAPEZOID: { wxPoint poly[4]; BuildPadPolygon( poly, wxSize(0,0), 0 ); RotatePoint( &delta, -m_Orient ); return TestPointInsidePolygon( poly, 4, delta ); } case PAD_SHAPE_OVAL: { RotatePoint( &delta, -m_Orient ); // An oval pad has the same shape as a segment with rounded ends // After rotation, the test point is relative to an horizontal pad int dist; wxPoint offset; if( dy > dx ) // shape is a vertical oval { offset.y = dy - dx; dist = dx; } else //if( dy <= dx ) shape is an horizontal oval { offset.x = dy - dx; dist = dy; } return TestSegmentHit( delta, - offset, offset, dist ); } break; case PAD_SHAPE_RECT: RotatePoint( &delta, -m_Orient ); if( (abs( delta.x ) <= dx ) && (abs( delta.y ) <= dy) ) return true; break; } return false; }
bool D_PAD::HitTest( const EDA_RECT& aRect, bool aContained, int aAccuracy ) const { EDA_RECT arect = aRect; arect.Normalize(); arect.Inflate( aAccuracy ); wxPoint shapePos = ShapePos(); EDA_RECT shapeRect; int r; EDA_RECT bb = GetBoundingBox(); wxPoint endCenter; int radius; if( !arect.Intersects( bb ) ) return false; // This covers total containment for all test cases if( arect.Contains( bb ) ) return true; switch( GetShape() ) { case PAD_SHAPE_CIRCLE: return arect.IntersectsCircle( GetPosition(), GetBoundingRadius() ); case PAD_SHAPE_RECT: shapeRect.SetOrigin( shapePos ); shapeRect.Inflate( m_Size.x / 2, m_Size.y / 2 ); return arect.Intersects( shapeRect, m_Orient ); case PAD_SHAPE_OVAL: // Circlular test if dimensions are equal if( m_Size.x == m_Size.y ) return arect.IntersectsCircle( shapePos, GetBoundingRadius() ); shapeRect.SetOrigin( shapePos ); // Horizontal dimension is greater if( m_Size.x > m_Size.y ) { radius = m_Size.y / 2; shapeRect.Inflate( m_Size.x / 2 - radius, radius ); endCenter = wxPoint( m_Size.x / 2 - radius, 0 ); RotatePoint( &endCenter, m_Orient ); // Test circular ends if( arect.IntersectsCircle( shapePos + endCenter, radius ) || arect.IntersectsCircle( shapePos - endCenter, radius ) ) { return true; } } else { radius = m_Size.x / 2; shapeRect.Inflate( radius, m_Size.y / 2 - radius ); endCenter = wxPoint( 0, m_Size.y / 2 - radius ); RotatePoint( &endCenter, m_Orient ); // Test circular ends if( arect.IntersectsCircle( shapePos + endCenter, radius ) || arect.IntersectsCircle( shapePos - endCenter, radius ) ) { return true; } } // Test rectangular portion between rounded ends if( arect.Intersects( shapeRect, m_Orient ) ) { return true; } break; case PAD_SHAPE_TRAPEZOID: /* Trapezoid intersection tests: * A) Any points of rect inside trapezoid * B) Any points of trapezoid inside rect * C) Any sides of trapezoid cross rect */ { wxPoint poly[4]; BuildPadPolygon( poly, wxSize( 0, 0 ), 0 ); wxPoint corners[4]; corners[0] = wxPoint( arect.GetLeft(), arect.GetTop() ); corners[1] = wxPoint( arect.GetRight(), arect.GetTop() ); corners[2] = wxPoint( arect.GetRight(), arect.GetBottom() ); corners[3] = wxPoint( arect.GetLeft(), arect.GetBottom() ); for( int i=0; i<4; i++ ) { RotatePoint( &poly[i], m_Orient ); poly[i] += shapePos; } for( int ii=0; ii<4; ii++ ) { if( TestPointInsidePolygon( poly, 4, corners[ii] ) ) { return true; } if( arect.Contains( poly[ii] ) ) { return true; } if( arect.Intersects( poly[ii], poly[(ii+1) % 4] ) ) { return true; } } return false; } case PAD_SHAPE_ROUNDRECT: /* RoundRect intersection can be broken up into simple tests: * a) Test intersection of horizontal rect * b) Test intersection of vertical rect * c) Test intersection of each corner */ r = GetRoundRectCornerRadius(); /* Test A - intersection of horizontal rect */ shapeRect.SetSize( 0, 0 ); shapeRect.SetOrigin( shapePos ); shapeRect.Inflate( m_Size.x / 2, m_Size.y / 2 - r ); // Short-circuit test for zero width or height if( shapeRect.GetWidth() > 0 && shapeRect.GetHeight() > 0 && arect.Intersects( shapeRect, m_Orient ) ) { return true; } /* Test B - intersection of vertical rect */ shapeRect.SetSize( 0, 0 ); shapeRect.SetOrigin( shapePos ); shapeRect.Inflate( m_Size.x / 2 - r, m_Size.y / 2 ); // Short-circuit test for zero width or height if( shapeRect.GetWidth() > 0 && shapeRect.GetHeight() > 0 && arect.Intersects( shapeRect, m_Orient ) ) { return true; } /* Test C - intersection of each corner */ endCenter = wxPoint( m_Size.x / 2 - r, m_Size.y / 2 - r ); RotatePoint( &endCenter, m_Orient ); if( arect.IntersectsCircle( shapePos + endCenter, r ) || arect.IntersectsCircle( shapePos - endCenter, r ) ) { return true; } endCenter = wxPoint( m_Size.x / 2 - r, -m_Size.y / 2 + r ); RotatePoint( &endCenter, m_Orient ); if( arect.IntersectsCircle( shapePos + endCenter, r ) || arect.IntersectsCircle( shapePos - endCenter, r ) ) { return true; } break; default: break; } return false; }
bool D_PAD::HitTest( const wxPoint& aPosition ) const { int dx, dy; wxPoint shape_pos = ShapePos(); wxPoint delta = aPosition - shape_pos; // first test: a test point must be inside a minimum sized bounding circle. int radius = GetBoundingRadius(); if( ( abs( delta.x ) > radius ) || ( abs( delta.y ) > radius ) ) return false; dx = m_Size.x >> 1; // dx also is the radius for rounded pads dy = m_Size.y >> 1; switch( GetShape() ) { case PAD_SHAPE_CIRCLE: if( KiROUND( EuclideanNorm( delta ) ) <= dx ) return true; break; case PAD_SHAPE_TRAPEZOID: { wxPoint poly[4]; BuildPadPolygon( poly, wxSize(0,0), 0 ); RotatePoint( &delta, -m_Orient ); return TestPointInsidePolygon( poly, 4, delta ); } case PAD_SHAPE_OVAL: { RotatePoint( &delta, -m_Orient ); // An oval pad has the same shape as a segment with rounded ends // After rotation, the test point is relative to an horizontal pad int dist; wxPoint offset; if( dy > dx ) // shape is a vertical oval { offset.y = dy - dx; dist = dx; } else //if( dy <= dx ) shape is an horizontal oval { offset.x = dy - dx; dist = dy; } return TestSegmentHit( delta, - offset, offset, dist ); } break; case PAD_SHAPE_RECT: RotatePoint( &delta, -m_Orient ); if( (abs( delta.x ) <= dx ) && (abs( delta.y ) <= dy) ) return true; break; case PAD_SHAPE_ROUNDRECT: { // Check for hit in polygon SHAPE_POLY_SET outline; const int segmentToCircleCount = 32; TransformRoundRectToPolygon( outline, wxPoint(0,0), GetSize(), m_Orient, GetRoundRectCornerRadius(), segmentToCircleCount ); const SHAPE_LINE_CHAIN &poly = outline.COutline( 0 ); return TestPointInsidePolygon( (const wxPoint*)&poly.CPoint(0), poly.PointCount(), delta ); } break; case PAD_SHAPE_CUSTOM: // Check for hit in polygon RotatePoint( &delta, -m_Orient ); if( m_customShapeAsPolygon.OutlineCount() ) { const SHAPE_LINE_CHAIN& poly = m_customShapeAsPolygon.COutline( 0 ); return TestPointInsidePolygon( (const wxPoint*)&poly.CPoint(0), poly.PointCount(), delta ); } break; } return false; }
void D_PAD::TransformShapeWithClearanceToPolygon( SHAPE_POLY_SET& aCornerBuffer, int aClearanceValue, int aError, bool ignoreLineWidth ) const { wxASSERT_MSG( !ignoreLineWidth, "IgnoreLineWidth has no meaning for pads." ); double angle = m_Orient; int dx = (m_Size.x / 2) + aClearanceValue; int dy = (m_Size.y / 2) + aClearanceValue; wxPoint padShapePos = ShapePos(); /* Note: for pad having a shape offset, * the pad position is NOT the shape position */ switch( GetShape() ) { case PAD_SHAPE_CIRCLE: { TransformCircleToPolygon( aCornerBuffer, padShapePos, dx, aError ); } break; case PAD_SHAPE_OVAL: // An oval pad has the same shape as a segment with rounded ends { int width; wxPoint shape_offset; if( dy > dx ) // Oval pad X/Y ratio for choosing translation axis { shape_offset.y = dy - dx; width = dx * 2; } else //if( dy <= dx ) { shape_offset.x = dy - dx; width = dy * 2; } RotatePoint( &shape_offset, angle ); wxPoint start = padShapePos - shape_offset; wxPoint end = padShapePos + shape_offset; TransformOvalClearanceToPolygon( aCornerBuffer, start, end, width, aError ); } break; case PAD_SHAPE_TRAPEZOID: case PAD_SHAPE_RECT: { wxPoint corners[4]; BuildPadPolygon( corners, wxSize( 0, 0 ), angle ); SHAPE_POLY_SET outline; outline.NewOutline(); for( int ii = 0; ii < 4; ii++ ) { corners[ii] += padShapePos; outline.Append( corners[ii].x, corners[ii].y ); } int numSegs = std::max( GetArcToSegmentCount( aClearanceValue, aError, 360.0 ), 6 ); double correction = GetCircletoPolyCorrectionFactor( numSegs ); int rounding_radius = KiROUND( aClearanceValue * correction ); outline.Inflate( rounding_radius, numSegs ); aCornerBuffer.Append( outline ); } break; case PAD_SHAPE_CHAMFERED_RECT: case PAD_SHAPE_ROUNDRECT: { SHAPE_POLY_SET outline; int radius = GetRoundRectCornerRadius() + aClearanceValue; int numSegs = std::max( GetArcToSegmentCount( radius, aError, 360.0 ), 6 ); double correction = GetCircletoPolyCorrectionFactor( numSegs ); int clearance = KiROUND( aClearanceValue * correction ); int rounding_radius = GetRoundRectCornerRadius() + clearance; wxSize shapesize( m_Size ); shapesize.x += clearance * 2; shapesize.y += clearance * 2; bool doChamfer = GetShape() == PAD_SHAPE_CHAMFERED_RECT; TransformRoundChamferedRectToPolygon( outline, padShapePos, shapesize, angle, rounding_radius, doChamfer ? GetChamferRectRatio() : 0.0, doChamfer ? GetChamferPositions() : 0, aError ); aCornerBuffer.Append( outline ); } break; case PAD_SHAPE_CUSTOM: { int numSegs = std::max( GetArcToSegmentCount( aClearanceValue, aError, 360.0 ), 6 ); double correction = GetCircletoPolyCorrectionFactor( numSegs ); int clearance = KiROUND( aClearanceValue * correction ); SHAPE_POLY_SET outline; // Will contain the corners in board coordinates outline.Append( m_customShapeAsPolygon ); CustomShapeAsPolygonToBoardPosition( &outline, GetPosition(), GetOrientation() ); outline.Simplify( SHAPE_POLY_SET::PM_FAST ); outline.Inflate( clearance, numSegs ); outline.Fracture( SHAPE_POLY_SET::PM_FAST ); aCornerBuffer.Append( outline ); } break; } }
void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo ) { wxPoint coord[4]; double angle = m_Orient; int seg_width; GRSetDrawMode( aDC, aDrawInfo.m_DrawMode ); // calculate pad shape position : wxPoint shape_pos = ShapePos() - aDrawInfo.m_Offset; wxSize halfsize = m_Size; halfsize.x >>= 1; halfsize.y >>= 1; switch( GetShape() ) { case PAD_CIRCLE: if( aDrawInfo.m_ShowPadFilled ) GRFilledCircle( aClipBox, aDC, shape_pos.x, shape_pos.y, halfsize.x + aDrawInfo.m_Mask_margin.x, 0, aDrawInfo.m_Color, aDrawInfo.m_Color ); else GRCircle( aClipBox, aDC, shape_pos.x, shape_pos.y, halfsize.x + aDrawInfo.m_Mask_margin.x, m_PadSketchModePenSize, aDrawInfo.m_Color ); if( aDrawInfo.m_PadClearance ) { GRCircle( aClipBox, aDC, shape_pos.x, shape_pos.y, halfsize.x + aDrawInfo.m_PadClearance, 0, aDrawInfo.m_Color ); } break; case PAD_OVAL: { wxPoint segStart, segEnd; seg_width = BuildSegmentFromOvalShape(segStart, segEnd, angle, aDrawInfo.m_Mask_margin); segStart += shape_pos; segEnd += shape_pos; if( aDrawInfo.m_ShowPadFilled ) { GRFillCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y, seg_width, aDrawInfo.m_Color ); } else { GRCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y, seg_width, m_PadSketchModePenSize, aDrawInfo.m_Color ); } // Draw the clearance line if( aDrawInfo.m_PadClearance ) { seg_width += 2 * aDrawInfo.m_PadClearance; GRCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y, seg_width, aDrawInfo.m_Color ); } } break; case PAD_RECT: case PAD_TRAPEZOID: BuildPadPolygon( coord, aDrawInfo.m_Mask_margin, angle ); for( int ii = 0; ii < 4; ii++ ) coord[ii] += shape_pos; GRClosedPoly( aClipBox, aDC, 4, coord, aDrawInfo.m_ShowPadFilled, aDrawInfo.m_ShowPadFilled ? 0 : m_PadSketchModePenSize, aDrawInfo.m_Color, aDrawInfo.m_Color ); if( aDrawInfo.m_PadClearance ) { BuildPadPolygon( coord, wxSize( aDrawInfo.m_PadClearance, aDrawInfo.m_PadClearance ), angle ); for( int ii = 0; ii < 4; ii++ ) coord[ii] += shape_pos; GRClosedPoly( aClipBox, aDC, 4, coord, 0, aDrawInfo.m_Color, aDrawInfo.m_Color ); } break; default: break; } // Draw the pad hole wxPoint holepos = m_Pos - aDrawInfo.m_Offset; int hole = m_Drill.x >> 1; bool drawhole = hole > 0; if( !aDrawInfo.m_ShowPadFilled && !aDrawInfo.m_ShowNotPlatedHole ) drawhole = false; if( drawhole ) { bool blackpenstate = false; if( aDrawInfo.m_IsPrinting ) { blackpenstate = GetGRForceBlackPenState(); GRForceBlackPen( false ); aDrawInfo.m_HoleColor = WHITE; } if( aDrawInfo.m_DrawMode != GR_XOR ) GRSetDrawMode( aDC, GR_COPY ); else GRSetDrawMode( aDC, GR_XOR ); EDA_COLOR_T hole_color = aDrawInfo.m_HoleColor; if( aDrawInfo. m_ShowNotPlatedHole ) // Draw a specific hole color hole_color = aDrawInfo.m_NPHoleColor; switch( GetDrillShape() ) { case PAD_DRILL_CIRCLE: if( aDC->LogicalToDeviceXRel( hole ) > MIN_DRAW_WIDTH ) GRFilledCircle( aClipBox, aDC, holepos.x, holepos.y, hole, 0, hole_color, hole_color ); break; case PAD_DRILL_OBLONG: { wxPoint drl_start, drl_end; GetOblongDrillGeometry( drl_start, drl_end, seg_width ); GRFilledSegment( aClipBox, aDC, holepos + drl_start, holepos + drl_end, seg_width, hole_color ); } break; default: break; } if( aDrawInfo.m_IsPrinting ) GRForceBlackPen( blackpenstate ); } GRSetDrawMode( aDC, aDrawInfo.m_DrawMode ); // Draw "No connect" ( / or \ or cross X ) if necessary if( GetNetCode() == 0 && aDrawInfo.m_ShowNCMark ) { int dx0 = std::min( halfsize.x, halfsize.y ); EDA_COLOR_T nc_color = BLUE; if( m_layerMask[F_Cu] ) /* Draw \ */ GRLine( aClipBox, aDC, holepos.x - dx0, holepos.y - dx0, holepos.x + dx0, holepos.y + dx0, 0, nc_color ); if( m_layerMask[B_Cu] ) // Draw / GRLine( aClipBox, aDC, holepos.x + dx0, holepos.y - dx0, holepos.x - dx0, holepos.y + dx0, 0, nc_color ); } if( aDrawInfo.m_DrawMode != GR_XOR ) GRSetDrawMode( aDC, GR_COPY ); else GRSetDrawMode( aDC, GR_XOR ); // Draw the pad number if( !aDrawInfo.m_Display_padnum && !aDrawInfo.m_Display_netname ) return; wxPoint tpos0 = shape_pos; // Position of the centre of text wxPoint tpos = tpos0; wxSize AreaSize; // size of text area, normalized to AreaSize.y < AreaSize.x int shortname_len = 0; if( aDrawInfo.m_Display_netname ) shortname_len = GetShortNetname().Len(); if( GetShape() == PAD_CIRCLE ) angle = 0; AreaSize = m_Size; if( m_Size.y > m_Size.x ) { angle += 900; AreaSize.x = m_Size.y; AreaSize.y = m_Size.x; } if( shortname_len > 0 ) // if there is a netname, provides room to display this netname { AreaSize.y /= 2; // Text used only the upper area of the // pad. The lower area displays the net name tpos.y -= AreaSize.y / 2; } // Calculate the position of text, that is the middle point of the upper // area of the pad RotatePoint( &tpos, shape_pos, angle ); // Draw text with an angle between -90 deg and + 90 deg double t_angle = angle; NORMALIZE_ANGLE_90( t_angle ); /* Note: in next calculations, texte size is calculated for 3 or more * chars. Of course, pads numbers and nets names can have less than 3 * chars. but after some tries, i found this is gives the best look */ #define MIN_CHAR_COUNT 3 wxString buffer; int tsize; EDA_RECT* clipBox = aDrawInfo.m_DrawPanel? aDrawInfo.m_DrawPanel->GetClipBox() : NULL; if( aDrawInfo.m_Display_padnum ) { StringPadName( buffer ); int numpad_len = buffer.Len(); numpad_len = std::max( numpad_len, MIN_CHAR_COUNT ); tsize = std::min( AreaSize.y, AreaSize.x / numpad_len ); if( aDC->LogicalToDeviceXRel( tsize ) >= MIN_TEXT_SIZE ) // Not drawable when size too small. { // tsize reserve room for marges and segments thickness tsize = ( tsize * 7 ) / 10; DrawGraphicHaloText( clipBox, aDC, tpos, aDrawInfo.m_Color, BLACK, WHITE, buffer, t_angle, wxSize( tsize , tsize ), GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER, tsize / 7, false, false ); } } // display the short netname, if exists if( shortname_len == 0 ) return; shortname_len = std::max( shortname_len, MIN_CHAR_COUNT ); tsize = std::min( AreaSize.y, AreaSize.x / shortname_len ); if( aDC->LogicalToDeviceXRel( tsize ) >= MIN_TEXT_SIZE ) // Not drawable in size too small. { tpos = tpos0; if( aDrawInfo.m_Display_padnum ) tpos.y += AreaSize.y / 2; RotatePoint( &tpos, shape_pos, angle ); // tsize reserve room for marges and segments thickness tsize = ( tsize * 7 ) / 10; DrawGraphicHaloText( clipBox, aDC, tpos, aDrawInfo.m_Color, BLACK, WHITE, GetShortNetname(), t_angle, wxSize( tsize, tsize ), GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER, tsize / 7, false, false ); } }
void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo ) { wxPoint coord[4]; int delta_cx, delta_cy; int angle = m_Orient; int seg_width; GRSetDrawMode( aDC, aDrawInfo.m_DrawMode ); // calculate pad shape position : wxPoint shape_pos = ReturnShapePos() - aDrawInfo.m_Offset; wxSize halfsize = m_Size; halfsize.x >>= 1; halfsize.y >>= 1; switch( GetShape() ) { case PAD_CIRCLE: if( aDrawInfo.m_ShowPadFilled ) GRFilledCircle( aClipBox, aDC, shape_pos.x, shape_pos.y, halfsize.x + aDrawInfo.m_Mask_margin.x, 0, aDrawInfo.m_Color, aDrawInfo.m_Color ); else GRCircle( aClipBox, aDC, shape_pos.x, shape_pos.y, halfsize.x + aDrawInfo.m_Mask_margin.x, m_PadSketchModePenSize, aDrawInfo.m_Color ); if( aDrawInfo.m_PadClearance ) { GRCircle( aClipBox, aDC, shape_pos.x, shape_pos.y, halfsize.x + aDrawInfo.m_PadClearance, 0, aDrawInfo.m_Color ); } break; case PAD_OVAL: { wxPoint segStart, segEnd; seg_width = BuildSegmentFromOvalShape(segStart, segEnd, angle); segStart += shape_pos; segEnd += shape_pos; if( aDrawInfo.m_ShowPadFilled ) { GRFillCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y, seg_width, aDrawInfo.m_Color ); } else { GRCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y, seg_width, m_PadSketchModePenSize, aDrawInfo.m_Color ); } /* Draw the isolation line. */ if( aDrawInfo.m_PadClearance ) { seg_width += 2 * aDrawInfo.m_PadClearance; GRCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y, seg_width, aDrawInfo.m_Color ); } } break; case PAD_RECT: case PAD_TRAPEZOID: BuildPadPolygon( coord, aDrawInfo.m_Mask_margin, angle ); for( int ii = 0; ii < 4; ii++ ) coord[ii] += shape_pos; GRClosedPoly( aClipBox, aDC, 4, coord, aDrawInfo.m_ShowPadFilled, aDrawInfo.m_ShowPadFilled ? 0 : m_PadSketchModePenSize, aDrawInfo.m_Color, aDrawInfo.m_Color ); if( aDrawInfo.m_PadClearance ) { BuildPadPolygon( coord, wxSize( aDrawInfo.m_PadClearance, aDrawInfo.m_PadClearance ), angle ); for( int ii = 0; ii < 4; ii++ ) coord[ii] += shape_pos; GRClosedPoly( aClipBox, aDC, 4, coord, 0, aDrawInfo.m_Color, aDrawInfo.m_Color ); } break; default: break; } /* Draw the pad hole */ wxPoint holepos = m_Pos - aDrawInfo.m_Offset; int hole = m_Drill.x >> 1; bool drawhole = hole > 0; if( !aDrawInfo.m_ShowPadFilled && !aDrawInfo. m_ShowNotPlatedHole ) drawhole = false; if( drawhole ) { bool blackpenstate = false; if( aDrawInfo.m_IsPrinting ) { blackpenstate = GetGRForceBlackPenState(); GRForceBlackPen( false ); aDrawInfo.m_HoleColor = g_DrawBgColor; } if( aDrawInfo.m_DrawMode != GR_XOR ) GRSetDrawMode( aDC, GR_COPY ); else GRSetDrawMode( aDC, GR_XOR ); int hole_color = aDrawInfo.m_HoleColor; if( aDrawInfo. m_ShowNotPlatedHole ) // Draw a specific hole color hole_color = aDrawInfo.m_NPHoleColor; switch( m_DrillShape ) { case PAD_CIRCLE: if( aDC->LogicalToDeviceXRel( hole ) > 1 ) GRFilledCircle( aClipBox, aDC, holepos.x, holepos.y, hole, 0, aDrawInfo.m_Color, hole_color ); break; case PAD_OVAL: halfsize.x = m_Drill.x >> 1; halfsize.y = m_Drill.y >> 1; if( m_Drill.x > m_Drill.y ) /* horizontal */ { delta_cx = halfsize.x - halfsize.y; delta_cy = 0; seg_width = m_Drill.y; } else /* vertical */ { delta_cx = 0; delta_cy = halfsize.y - halfsize.x; seg_width = m_Drill.x; } RotatePoint( &delta_cx, &delta_cy, angle ); GRFillCSegm( aClipBox, aDC, holepos.x + delta_cx, holepos.y + delta_cy, holepos.x - delta_cx, holepos.y - delta_cy, seg_width, hole_color ); break; default: break; } if( aDrawInfo.m_IsPrinting ) GRForceBlackPen( blackpenstate ); } GRSetDrawMode( aDC, aDrawInfo.m_DrawMode ); /* Draw "No connect" ( / or \ or cross X ) if necessary. : */ if( m_Netname.IsEmpty() && aDrawInfo.m_ShowNCMark ) { int dx0 = MIN( halfsize.x, halfsize.y ); int nc_color = BLUE; if( m_layerMask & LAYER_FRONT ) /* Draw \ */ GRLine( aClipBox, aDC, holepos.x - dx0, holepos.y - dx0, holepos.x + dx0, holepos.y + dx0, 0, nc_color ); if( m_layerMask & LAYER_BACK ) /* Draw / */ GRLine( aClipBox, aDC, holepos.x + dx0, holepos.y - dx0, holepos.x - dx0, holepos.y + dx0, 0, nc_color ); } /* Draw the pad number */ if( !aDrawInfo.m_Display_padnum && !aDrawInfo.m_Display_netname ) return; wxPoint tpos0 = shape_pos; // Position of the centre of text wxPoint tpos = tpos0; wxSize AreaSize; // size of text area, normalized to AreaSize.y < AreaSize.x int shortname_len = m_ShortNetname.Len(); if( !aDrawInfo.m_Display_netname ) shortname_len = 0; if( GetShape() == PAD_CIRCLE ) angle = 0; AreaSize = m_Size; if( m_Size.y > m_Size.x ) { angle += 900; AreaSize.x = m_Size.y; AreaSize.y = m_Size.x; } if( shortname_len > 0 ) // if there is a netname, provides room to display this netname { AreaSize.y /= 2; // Text used only the upper area of the // pad. The lower area displays the net name tpos.y -= AreaSize.y / 2; } // Calculate the position of text, that is the middle point of the upper // area of the pad RotatePoint( &tpos, shape_pos, angle ); /* Draw text with an angle between -90 deg and + 90 deg */ int t_angle = angle; NORMALIZE_ANGLE_90( t_angle ); /* Note: in next calculations, texte size is calculated for 3 or more * chars. Of course, pads numbers and nets names can have less than 3 * chars. but after some tries, i found this is gives the best look */ #define MIN_CHAR_COUNT 3 wxString buffer; int tsize; if( aDrawInfo.m_Display_padnum ) { ReturnStringPadName( buffer ); int numpad_len = buffer.Len(); numpad_len = MAX( numpad_len, MIN_CHAR_COUNT ); tsize = min( AreaSize.y, AreaSize.x / numpad_len ); #define CHAR_SIZE_MIN 5 if( aDC->LogicalToDeviceXRel( tsize ) >= CHAR_SIZE_MIN ) // Not drawable when size too small. { // tsize reserve room for marges and segments thickness tsize = (int) ( tsize * 0.8 ); DrawGraphicText( aDrawInfo.m_DrawPanel, aDC, tpos, WHITE, buffer, t_angle, wxSize( tsize, tsize ), GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER, tsize / 7, false, false ); } } // display the short netname, if exists if( shortname_len == 0 ) return; shortname_len = MAX( shortname_len, MIN_CHAR_COUNT ); tsize = min( AreaSize.y, AreaSize.x / shortname_len ); if( aDC->LogicalToDeviceXRel( tsize ) >= CHAR_SIZE_MIN ) // Not drawable in size too small. { tpos = tpos0; if( aDrawInfo.m_Display_padnum ) tpos.y += AreaSize.y / 2; RotatePoint( &tpos, shape_pos, angle ); // tsize reserve room for marges and segments thickness tsize = (int) ( tsize * 0.8 ); DrawGraphicText( aDrawInfo.m_DrawPanel, aDC, tpos, WHITE, m_ShortNetname, t_angle, wxSize( tsize, tsize ), GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER, tsize / 7, false, false ); } }
/* Function TransformShapeWithClearanceToPolygon * Convert the pad shape to a closed polygon * Used in filling zones calculations and 3D view generation * Circles and arcs are approximated by segments * aCornerBuffer = a SHAPE_POLY_SET to store the polygon corners * aClearanceValue = the clearance around the pad * aCircleToSegmentsCount = the number of segments to approximate a circle * aCorrectionFactor = the correction to apply to circles radius to keep * clearance when the circle is approximated by segment bigger or equal * to the real clearance value (usually near from 1.0) */ void D_PAD:: TransformShapeWithClearanceToPolygon( SHAPE_POLY_SET& aCornerBuffer, int aClearanceValue, int aCircleToSegmentsCount, double aCorrectionFactor ) const { double angle = m_Orient; int dx = (m_Size.x / 2) + aClearanceValue; int dy = (m_Size.y / 2) + aClearanceValue; wxPoint PadShapePos = ShapePos(); /* Note: for pad having a shape offset, * the pad position is NOT the shape position */ switch( GetShape() ) { case PAD_SHAPE_CIRCLE: dx = KiROUND( dx * aCorrectionFactor ); TransformCircleToPolygon( aCornerBuffer, PadShapePos, dx, aCircleToSegmentsCount ); break; case PAD_SHAPE_OVAL: // An oval pad has the same shape as a segment with rounded ends { int width; wxPoint shape_offset; if( dy > dx ) // Oval pad X/Y ratio for choosing translation axis { dy = KiROUND( dy * aCorrectionFactor ); shape_offset.y = dy - dx; width = dx * 2; } else //if( dy <= dx ) { dx = KiROUND( dx * aCorrectionFactor ); shape_offset.x = dy - dx; width = dy * 2; } RotatePoint( &shape_offset, angle ); wxPoint start = PadShapePos - shape_offset; wxPoint end = PadShapePos + shape_offset; TransformRoundedEndsSegmentToPolygon( aCornerBuffer, start, end, aCircleToSegmentsCount, width ); } break; case PAD_SHAPE_TRAPEZOID: case PAD_SHAPE_RECT: { wxPoint corners[4]; BuildPadPolygon( corners, wxSize( 0, 0 ), angle ); SHAPE_POLY_SET outline; outline.NewOutline(); for( int ii = 0; ii < 4; ii++ ) { corners[ii] += PadShapePos; outline.Append( corners[ii].x, corners[ii].y ); } double rounding_radius = aClearanceValue * aCorrectionFactor; outline.Inflate( (int) rounding_radius, aCircleToSegmentsCount ); aCornerBuffer.Append( outline ); } break; } }