bool PLOT_CONTROLLER::OpenPlotfile( const wxString &aSuffix,
PlotFormat aFormat,
const wxString &aSheetDesc )
{
LOCALE_IO toggle;
/* Save the current format: sadly some plot routines depends on this
but the main reason is that the StartPlot method uses it to
dispatch the plotter creation */
m_plotOpts.SetFormat( aFormat );
// Ensure that the previous plot is closed
ClosePlot();
// Now compute the full filename for the output and start the plot
// (after ensuring the output directory is OK)
wxString outputDirName = m_plotOpts.GetOutputDirectory() ;
wxFileName outputDir = wxFileName::DirName( outputDirName );
wxString boardFilename = m_board->GetFileName();
if( EnsureOutputDirectory( &outputDir, boardFilename ) )
{
wxFileName fn( boardFilename );
BuildPlotFileName( &fn, outputDirName, aSuffix, GetDefaultPlotExtension( aFormat ) );
m_plotter = StartPlotBoard( m_board, &m_plotOpts, fn.GetFullPath(), aSheetDesc );
}
return( m_plotter != NULL );
}
void GENDRILL_WRITER_BASE::CreateMapFilesSet( const wxString& aPlotDirectory,
REPORTER * aReporter )
{
wxFileName fn;
wxString msg;
std::vector<DRILL_LAYER_PAIR> hole_sets = getUniqueLayerPairs();
// append a pair representing the NPTH set of holes, for separate drill files.
if( !m_merge_PTH_NPTH )
hole_sets.push_back( DRILL_LAYER_PAIR( F_Cu, B_Cu ) );
for( std::vector<DRILL_LAYER_PAIR>::const_iterator it = hole_sets.begin();
it != hole_sets.end(); ++it )
{
DRILL_LAYER_PAIR pair = *it;
// For separate drill files, the last layer pair is the NPTH drill file.
bool doing_npth = m_merge_PTH_NPTH ? false : ( it == hole_sets.end() - 1 );
buildHolesList( pair, doing_npth );
// The file is created if it has holes, or if it is the non plated drill file
// to be sure the NPTH file is up to date in separate files mode.
if( getHolesCount() > 0 || doing_npth )
{
fn = getDrillFileName( pair, doing_npth, m_merge_PTH_NPTH );
fn.SetPath( aPlotDirectory );
fn.SetExt( wxEmptyString ); // Will be added by GenDrillMap
wxString fullfilename = fn.GetFullPath() + wxT( "-drl_map" );
fullfilename << wxT(".") << GetDefaultPlotExtension( m_mapFileFmt );
bool success = genDrillMapFile( fullfilename, m_mapFileFmt );
if( ! success )
{
if( aReporter )
{
msg.Printf( _( "** Unable to create %s **\n" ), GetChars( fullfilename ) );
aReporter->Report( msg );
}
return;
}
else
{
if( aReporter )
{
msg.Printf( _( "Create file %s\n" ), GetChars( fullfilename ) );
aReporter->Report( msg );
}
}
}
}
}
bool PLOT_CONTROLLER::OpenPlotfile( const wxString &aSuffix,
PlotFormat aFormat,
const wxString &aSheetDesc )
{
LOCALE_IO toggle;
/* Save the current format: sadly some plot routines depends on this
but the main reason is that the StartPlot method uses it to
dispatch the plotter creation */
GetPlotOptions().SetFormat( aFormat );
// Ensure that the previous plot is closed
ClosePlot();
// Now compute the full filename for the output and start the plot
// (after ensuring the output directory is OK)
wxString outputDirName = GetPlotOptions().GetOutputDirectory() ;
wxFileName outputDir = wxFileName::DirName( outputDirName );
wxString boardFilename = m_board->GetFileName();
if( EnsureFileDirectoryExists( &outputDir, boardFilename ) )
{
// outputDir contains now the full path of plot files
m_plotFile = boardFilename;
m_plotFile.SetPath( outputDir.GetPath() );
wxString fileExt = GetDefaultPlotExtension( aFormat );
// Gerber format can use specific file ext, depending on layers
// (now not a good practice, because the official file ext is .gbr)
if( GetPlotOptions().GetFormat() == PLOT_FORMAT_GERBER &&
GetPlotOptions().GetUseGerberProtelExtensions() )
fileExt = GetGerberProtelExtension( GetLayer() );
// Build plot filenames from the board name and layer names:
BuildPlotFileName( &m_plotFile, outputDir.GetPath(), aSuffix, fileExt );
m_plotter = StartPlotBoard( m_board, &GetPlotOptions(), ToLAYER_ID( GetLayer() ),
m_plotFile.GetFullPath(), aSheetDesc );
}
return( m_plotter != NULL );
}
void EXCELLON_WRITER::CreateDrillandMapFilesSet( const wxString& aPlotDirectory,
bool aGenDrill, bool aGenMap,
REPORTER * aReporter )
{
wxFileName fn;
wxString msg;
wxString layername_extend; // added to the board filefame to create a full filename
//(board fileName + layer pair names)
// If some buried/blind vias are found, drill files are created
// layer pair by layer pair for buried vias
bool hasBuriedVias = false;
for( TRACK* track = m_pcb->m_Track; track != NULL; track = track->Next() )
{
if( track->Type() == PCB_VIA_T )
{
const VIA *via = static_cast<const VIA*>( track );
if( via->GetViaType() == VIA_MICROVIA ||
via->GetViaType() == VIA_BLIND_BURIED )
{
hasBuriedVias = true;
break;
}
}
}
int layer1 = F_Cu;
int layer2 = B_Cu;
bool gen_through_holes = true;
bool gen_NPTH_holes = false;
for( ; ; )
{
BuildHolesList( layer1, layer2, gen_through_holes ? false : true,
gen_NPTH_holes, m_merge_PTH_NPTH );
if( GetHolesCount() > 0 ) // has holes?
{
fn = m_pcb->GetFileName();
layername_extend.Empty();
if( gen_NPTH_holes )
{
layername_extend << wxT( "-NPTH" );
}
else if( !gen_through_holes )
{
if( layer1 == F_Cu )
layername_extend << wxT( "-front" );
else
layername_extend << wxT( "-inner" ) << layer1;
if( layer2 == B_Cu )
layername_extend << wxT( "-back" );
else
layername_extend << wxT( "-inner" ) << layer2;
}
fn.SetName( fn.GetName() + layername_extend );
fn.SetPath( aPlotDirectory );
if( aGenDrill )
{
fn.SetExt( DrillFileExtension );
wxString fullFilename = fn.GetFullPath();
FILE* file = wxFopen( fullFilename, wxT( "w" ) );
if( file == NULL )
{
if( aReporter )
{
msg.Printf( _( "** Unable to create %s **\n" ),
GetChars( fullFilename ) );
aReporter->Report( msg );
}
break;
}
else
{
if( aReporter )
{
msg.Printf( _( "Create file %s\n" ), GetChars( fullFilename ) );
aReporter->Report( msg );
}
}
CreateDrillFile( file );
}
if( aGenMap )
{
fn.SetExt( wxEmptyString ); // Will be added by GenDrillMap
wxString fullfilename = fn.GetFullPath() + wxT( "-drl_map" );
fullfilename << wxT(".") << GetDefaultPlotExtension( m_mapFileFmt );
bool success = GenDrillMapFile( fullfilename, m_mapFileFmt );
if( ! success )
{
if( aReporter )
{
msg.Printf( _( "** Unable to create %s **\n" ), GetChars( fullfilename ) );
aReporter->Report( msg );
}
return;
}
else
{
if( aReporter )
{
msg.Printf( _( "Create file %s\n" ), GetChars( fullfilename ) );
aReporter->Report( msg );
}
}
}
}
if( gen_NPTH_holes ) // The last drill file was created
break;
if( !hasBuriedVias )
gen_NPTH_holes = true;
else
{
if( gen_through_holes )
layer2 = layer1 + 1; // done with through-board holes, prepare generation of first layer pair
else
{
if( layer2 >= B_Cu ) // no more layer pair to consider
{
layer1 = F_Cu;
layer2 = B_Cu;
gen_NPTH_holes = true;
continue;
}
layer1++;
layer2++; // use next layer pair
if( layer2 == m_pcb->GetCopperLayerCount() - 1 )
layer2 = B_Cu; // the last layer is always the back layer
}
gen_through_holes = false;
}
}
}
void DIALOG_PLOT::Plot( wxCommandEvent& event )
{
applyPlotSettings();
// If no layer selected, we have nothing plotted.
// Prompt user if it happens because he could think there is a bug in Pcbnew.
if( !m_plotOpts.GetLayerSelection().any() )
{
DisplayError( this, _( "No layer selected, Nothing to plot" ) );
return;
}
// Create output directory if it does not exist (also transform it in
// absolute form). Bail if it fails
wxFileName outputDir = wxFileName::DirName( m_plotOpts.GetOutputDirectory() );
wxString boardFilename = m_parent->GetBoard()->GetFileName();
REPORTER& reporter = m_messagesPanel->Reporter();
if( !EnsureFileDirectoryExists( &outputDir, boardFilename, &reporter ) )
{
wxString msg;
msg.Printf( _( "Could not write plot files to folder \"%s\"." ),
GetChars( outputDir.GetPath() ) );
DisplayError( this, msg );
return;
}
m_plotOpts.SetAutoScale( false );
m_plotOpts.SetScale( 1 );
switch( m_plotOpts.GetScaleSelection() )
{
default:
break;
case 0: // Autoscale option
m_plotOpts.SetAutoScale( true );
break;
case 2: // 3:2 option
m_plotOpts.SetScale( 1.5 );
break;
case 3: // 2:1 option
m_plotOpts.SetScale( 2 );
break;
case 4: // 3:1 option
m_plotOpts.SetScale( 3 );
break;
}
/* If the scale factor edit controls are disabled or the scale value
* is 0, don't adjust the base scale factor. This fixes a bug when
* the default scale adjust is initialized to 0 and saved in program
* settings resulting in a divide by zero fault.
*/
if( m_fineAdjustXscaleOpt->IsEnabled() && m_XScaleAdjust != 0.0 )
m_plotOpts.SetFineScaleAdjustX( m_XScaleAdjust );
if( m_fineAdjustYscaleOpt->IsEnabled() && m_YScaleAdjust != 0.0 )
m_plotOpts.SetFineScaleAdjustY( m_YScaleAdjust );
if( m_PSFineAdjustWidthOpt->IsEnabled() )
m_plotOpts.SetWidthAdjust( m_PSWidthAdjust );
wxString file_ext( GetDefaultPlotExtension( m_plotOpts.GetFormat() ) );
// Test for a reasonable scale value
// XXX could this actually happen? isn't it constrained in the apply
// function?
if( m_plotOpts.GetScale() < PLOT_MIN_SCALE )
DisplayInfoMessage( this,
_( "Warning: Scale option set to a very small value" ) );
if( m_plotOpts.GetScale() > PLOT_MAX_SCALE )
DisplayInfoMessage( this,
_( "Warning: Scale option set to a very large value" ) );
GERBER_JOBFILE_WRITER jobfile_writer( m_board, &reporter );
// Save the current plot options in the board
m_parent->SetPlotSettings( m_plotOpts );
wxBusyCursor dummy;
for( LSEQ seq = m_plotOpts.GetLayerSelection().UIOrder(); seq; ++seq )
{
PCB_LAYER_ID layer = *seq;
// All copper layers that are disabled are actually selected
// This is due to wonkyness in automatically selecting copper layers
// for plotting when adding more than two layers to a board.
// If plot options become accessible to the layers setup dialog
// please move this functionality there!
// This skips a copper layer if it is actually disabled on the board.
if( ( LSET::AllCuMask() & ~m_board->GetEnabledLayers() )[layer] )
continue;
// Pick the basename from the board file
wxFileName fn( boardFilename );
// Use Gerber Extensions based on layer number
// (See http://en.wikipedia.org/wiki/Gerber_File)
if( m_plotOpts.GetFormat() == PLOT_FORMAT_GERBER && m_useGerberExtensions->GetValue() )
file_ext = GetGerberProtelExtension( layer );
BuildPlotFileName( &fn, outputDir.GetPath(), m_board->GetLayerName( layer ), file_ext );
wxString fullname = fn.GetFullName();
jobfile_writer.AddGbrFile( layer, fullname );
LOCALE_IO toggle;
BOARD* board = m_parent->GetBoard();
PLOTTER* plotter = StartPlotBoard( board, &m_plotOpts, layer, fn.GetFullPath(), wxEmptyString );
// Print diags in messages box:
wxString msg;
if( plotter )
{
PlotOneBoardLayer( board, plotter, layer, m_plotOpts );
plotter->EndPlot();
delete plotter;
msg.Printf( _( "Plot file \"%s\" created." ), GetChars( fn.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ACTION );
}
else
{
msg.Printf( _( "Unable to create file \"%s\"." ), GetChars( fn.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
}
}
if( m_plotOpts.GetFormat() == PLOT_FORMAT_GERBER && m_plotOpts.GetCreateGerberJobFile() )
{
// Pick the basename from the board file
wxFileName fn( boardFilename );
// Build gerber job file from basename
BuildPlotFileName( &fn, outputDir.GetPath(), "job", GerberJobFileExtension );
jobfile_writer.CreateJobFile( fn.GetFullPath() );
}
}