示例#1
0
static int __devinit njs_cs_init_rest(struct IsdnCard *card,
				      struct IsdnCardState *cs)
{
	const int bytecnt = 256;

	printk(KERN_INFO
		"NETjet-S: %s card configured at %#lx IRQ %d\n",
		cs->subtyp ? "TJ320" : "TJ300", cs->hw.njet.base, cs->irq);
	if (!request_region(cs->hw.njet.base, bytecnt, "netjet-s isdn")) {
		printk(KERN_WARNING
		       "HiSax: NETjet-S config port %#lx-%#lx already in use\n",
		       cs->hw.njet.base,
		       cs->hw.njet.base + bytecnt);
		return (0);
	}
	cs->readisac  = &NETjet_ReadIC;
	cs->writeisac = &NETjet_WriteIC;
	cs->readisacfifo  = &NETjet_ReadICfifo;
	cs->writeisacfifo = &NETjet_WriteICfifo;
	cs->BC_Read_Reg  = &dummyrr;
	cs->BC_Write_Reg = &dummywr;
	cs->BC_Send_Data = &netjet_fill_dma;
	setup_isac(cs);
	cs->cardmsg = &NETjet_S_card_msg;
	cs->irq_func = &netjet_s_interrupt;
	cs->irq_flags |= IRQF_SHARED;
	ISACVersion(cs, "NETjet-S:");

	return (1);
}
示例#2
0
int __init
setup_saphir(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, saphir_rev);
	printk(KERN_INFO "HiSax: HST Saphir driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_HSTSAPHIR)
		return (0);

	/* IO-Ports */
	cs->hw.saphir.cfg_reg = card->para[1];
	cs->hw.saphir.isac = card->para[1] + ISAC_DATA;
	cs->hw.saphir.hscx = card->para[1] + HSCX_DATA;
	cs->hw.saphir.ale = card->para[1] + ADDRESS_REG;
	cs->irq = card->para[0];
	if (check_region((cs->hw.saphir.cfg_reg), 6)) {
		printk(KERN_WARNING
			"HiSax: %s config port %x-%x already in use\n",
			CardType[card->typ],
			cs->hw.saphir.cfg_reg,
			cs->hw.saphir.cfg_reg + 5);
		return (0);
	} else
		request_region(cs->hw.saphir.cfg_reg,6, "saphir");

	printk(KERN_INFO
	       "HiSax: %s config irq:%d io:0x%X\n",
	       CardType[cs->typ], cs->irq,
	       cs->hw.saphir.cfg_reg);

	cs->hw.saphir.timer.function = (void *) SaphirWatchDog;
	cs->hw.saphir.timer.data = (long) cs;
	init_timer(&cs->hw.saphir.timer);
	cs->hw.saphir.timer.expires = jiffies + 4*HZ;
	add_timer(&cs->hw.saphir.timer);
	if (saphir_reset(cs)) {
		release_io_saphir(cs);
		return (0);
	}
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &saphir_card_msg;
	cs->irq_func = &saphir_interrupt;
	ISACVersion(cs, "saphir:");
	if (HscxVersion(cs, "saphir:")) {
		printk(KERN_WARNING
		    "saphir: wrong HSCX versions check IO address\n");
		release_io_saphir(cs);
		return (0);
	}
	return (1);
}
int __init
setup_sportster(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, sportster_revision);
	printk(KERN_INFO "HiSax: USR Sportster driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_SPORTSTER)
		return (0);

	cs->hw.spt.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	if (!get_io_range(cs))
		return (0);
	cs->hw.spt.isac = cs->hw.spt.cfg_reg + SPORTSTER_ISAC;
	cs->hw.spt.hscx[0] = cs->hw.spt.cfg_reg + SPORTSTER_HSCXA;
	cs->hw.spt.hscx[1] = cs->hw.spt.cfg_reg + SPORTSTER_HSCXB;
	
	switch(cs->irq) {
		case 5:	cs->hw.spt.res_irq = 1;
			break;
		case 7:	cs->hw.spt.res_irq = 2;
			break;
		case 10:cs->hw.spt.res_irq = 3;
			break;
		case 11:cs->hw.spt.res_irq = 4;
			break;
		case 12:cs->hw.spt.res_irq = 5;
			break;
		case 14:cs->hw.spt.res_irq = 6;
			break;
		case 15:cs->hw.spt.res_irq = 7;
			break;
		default:release_io_sportster(cs);
			printk(KERN_WARNING "Sportster: wrong IRQ\n");
			return(0);
	}
	printk(KERN_INFO "HiSax: %s config irq:%d cfg:0x%X\n",
		CardType[cs->typ], cs->irq, cs->hw.spt.cfg_reg);
	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Sportster_card_msg;
	cs->irq_func = &sportster_interrupt;
	ISACVersion(cs, "Sportster:");
	if (HscxVersion(cs, "Sportster:")) {
		printk(KERN_WARNING
		       "Sportster: wrong HSCX versions check IO address\n");
		release_io_sportster(cs);
		return (0);
	}
	return (1);
}
示例#4
0
int __devinit
setup_avm_a1_pcmcia(struct IsdnCard *card)
{
	u_char model, vers;
	struct IsdnCardState *cs = card->cs;
	long flags;
	char tmp[64];


	strcpy(tmp, avm_revision);
	printk(KERN_INFO "HiSax: AVM A1 PCMCIA driver Rev. %s\n",
						 HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_A1_PCMCIA)
		return (0);

	cs->hw.avm.cfg_reg = card->para[1];
	cs->irq = card->para[0];


	save_flags(flags);
	outb(cs->hw.avm.cfg_reg+ASL1_OFFSET, ASL1_W_ENABLE_S0);
        sti();

	byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET,0x00);
	HZDELAY(HZ / 5 + 1);
	byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET,ASL0_W_RESET);
	HZDELAY(HZ / 5 + 1);
	byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET,0x00);

	byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET, ASL0_W_TDISABLE|ASL0_W_TRESET);

	restore_flags(flags);

	model = bytein(cs->hw.avm.cfg_reg+MODREG_OFFSET);
	vers = bytein(cs->hw.avm.cfg_reg+VERREG_OFFSET);

	printk(KERN_INFO "AVM A1 PCMCIA: io 0x%x irq %d model %d version %d\n",
				cs->hw.avm.cfg_reg, cs->irq, model, vers);

	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &AVM_card_msg;
	cs->irq_func = &avm_a1p_interrupt;

	ISACVersion(cs, "AVM A1 PCMCIA:");
	if (HscxVersion(cs, "AVM A1 PCMCIA:")) {
		printk(KERN_WARNING
		       "AVM A1 PCMCIA: wrong HSCX versions check IO address\n");
		return (0);
	}
	return (1);
}
示例#5
0
int __init
setup_mic(struct IsdnCard *card)
{
	int bytecnt;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, mic_revision);
	printk(KERN_INFO "HiSax: mic driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_MIC)
		return (0);

	bytecnt = 8;
	cs->hw.mic.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	cs->hw.mic.adr = cs->hw.mic.cfg_reg + MIC_ADR;
	cs->hw.mic.isac = cs->hw.mic.cfg_reg + MIC_ISAC;
	cs->hw.mic.hscx = cs->hw.mic.cfg_reg + MIC_HSCX;

	if (check_region((cs->hw.mic.cfg_reg), bytecnt)) {
		printk(KERN_WARNING
		       "HiSax: %s config port %x-%x already in use\n",
		       CardType[card->typ],
		       cs->hw.mic.cfg_reg,
		       cs->hw.mic.cfg_reg + bytecnt);
		return (0);
	} else {
		request_region(cs->hw.mic.cfg_reg, bytecnt, "mic isdn");
	}

	printk(KERN_INFO
	       "mic: defined at 0x%x IRQ %d\n",
	       cs->hw.mic.cfg_reg,
	       cs->irq);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &mic_card_msg;
	cs->irq_func = &mic_interrupt;
	ISACVersion(cs, "mic:");
	if (HscxVersion(cs, "mic:")) {
		printk(KERN_WARNING
		    "mic: wrong HSCX versions check IO address\n");
		release_io_mic(cs);
		return (0);
	}
	return (1);
}
示例#6
0
__initfunc(int
setup_ix1micro(struct IsdnCard *card))
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, ix1_revision);
	printk(KERN_INFO "HiSax: ITK IX1 driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_IX1MICROR2)
		return (0);

	/* IO-Ports */
	cs->hw.ix1.isac_ale = card->para[1] + ISAC_COMMAND_OFFSET;
	cs->hw.ix1.hscx_ale = card->para[1] + HSCX_COMMAND_OFFSET;
	cs->hw.ix1.isac = card->para[1] + ISAC_DATA_OFFSET;
	cs->hw.ix1.hscx = card->para[1] + HSCX_DATA_OFFSET;
	cs->hw.ix1.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	if (cs->hw.ix1.cfg_reg) {
		if (check_region((cs->hw.ix1.cfg_reg), 4)) {
			printk(KERN_WARNING
			  "HiSax: %s config port %x-%x already in use\n",
			       CardType[card->typ],
			       cs->hw.ix1.cfg_reg,
			       cs->hw.ix1.cfg_reg + 4);
			return (0);
		} else
			request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg");
	}
	printk(KERN_INFO
	       "HiSax: %s config irq:%d io:0x%X\n",
	       CardType[cs->typ], cs->irq,
	       cs->hw.ix1.cfg_reg);
	ix1_reset(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &ix1_card_msg;
	cs->irq_func = &ix1micro_interrupt;
	ISACVersion(cs, "ix1-Micro:");
	if (HscxVersion(cs, "ix1-Micro:")) {
		printk(KERN_WARNING
		    "ix1-Micro: wrong HSCX versions check IO address\n");
		release_io_ix1micro(cs);
		return (0);
	}
	return (1);
}
static int __devinit a4t_cs_init(struct IsdnCard *card,
				 struct IsdnCardState *cs,
				 u_int pci_memaddr)
{
	I20_REGISTER_FILE *pI20_Regs;

	if (!cs->irq) {		/* IRQ range check ?? */
		printk(KERN_WARNING "HiSax: Telekom A4T: No IRQ\n");
		return (0);
	}
	cs->hw.ax.base = (long) ioremap(pci_memaddr, 4096);
	/* Check suspecious address */
	pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base);
	if ((pI20_Regs->i20IntStatus & 0x8EFFFFFF) != 0) {
		printk(KERN_WARNING "HiSax: Telekom A4T address "
		       "%lx-%lx suspicious\n",
		       cs->hw.ax.base, cs->hw.ax.base + 4096);
		iounmap((void *) cs->hw.ax.base);
		cs->hw.ax.base = 0;
		return (0);
	}
	cs->hw.ax.isac_adr = cs->hw.ax.base + PO_OFFSET;
	cs->hw.ax.jade_adr = cs->hw.ax.base + PO_OFFSET;
	cs->hw.ax.isac_ale = GCS_1;
	cs->hw.ax.jade_ale = GCS_3;

	printk(KERN_INFO "HiSax: Telekom A4T: Card configured at "
	       "0x%lX IRQ %d\n",
	       cs->hw.ax.base, cs->irq);

	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadJADE;
	cs->BC_Write_Reg = &WriteJADE;
	cs->BC_Send_Data = &jade_fill_fifo;
	cs->cardmsg = &BKM_card_msg;
	cs->irq_func = &bkm_interrupt;
	cs->irq_flags |= IRQF_SHARED;
	ISACVersion(cs, "Telekom A4T:");
	/* Jade version */
	JadeVersion(cs, "Telekom A4T:");

	return (1);
}
示例#8
0
int __init
setup_niccy(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, niccy_revision);
	printk(KERN_INFO "HiSax: Niccy driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_NICCY)
		return (0);
#ifdef __ISAPNP__
	if (!card->para[1] && isapnp_present()) {
		struct pci_bus *pb;
		struct pci_dev *pd;

		if ((pb = isapnp_find_card(
			ISAPNP_VENDOR('S', 'D', 'A'),
			ISAPNP_FUNCTION(0x0150), pnp_c))) {
			pnp_c = pb;
			pd = NULL;
			if (!(pd = isapnp_find_dev(pnp_c,
				ISAPNP_VENDOR('S', 'D', 'A'),
				ISAPNP_FUNCTION(0x0150), pd))) {
				printk(KERN_ERR "NiccyPnP: PnP error card found, no device\n");
				return (0);
			}
			pd->prepare(pd);
			pd->deactivate(pd);
			pd->activate(pd);
			card->para[1] = pd->resource[0].start;
			card->para[2] = pd->resource[1].start;
			card->para[0] = pd->irq_resource[0].start;
			if (!card->para[0] || !card->para[1] || !card->para[2]) {
				printk(KERN_ERR "NiccyPnP:some resources are missing %ld/%lx/%lx\n",
					card->para[0], card->para[1], card->para[2]);
				pd->deactivate(pd);
				return(0);
			}
		} else {
			printk(KERN_INFO "NiccyPnP: no ISAPnP card found\n");
		}
	}
#endif
	if (card->para[1]) {
		cs->hw.niccy.isac = card->para[1] + ISAC_PNP;
		cs->hw.niccy.hscx = card->para[1] + HSCX_PNP;
		cs->hw.niccy.isac_ale = card->para[2] + ISAC_PNP;
		cs->hw.niccy.hscx_ale = card->para[2] + HSCX_PNP;
		cs->hw.niccy.cfg_reg = 0;
		cs->subtyp = NICCY_PNP;
		cs->irq = card->para[0];
		if (check_region((cs->hw.niccy.isac), 2)) {
			printk(KERN_WARNING
				"HiSax: %s data port %x-%x already in use\n",
				CardType[card->typ],
				cs->hw.niccy.isac,
				cs->hw.niccy.isac + 1);
			return (0);
		} else
			request_region(cs->hw.niccy.isac, 2, "niccy data");
		if (check_region((cs->hw.niccy.isac_ale), 2)) {
			printk(KERN_WARNING
				"HiSax: %s address port %x-%x already in use\n",
				CardType[card->typ],
				cs->hw.niccy.isac_ale,
				cs->hw.niccy.isac_ale + 1);
			release_region(cs->hw.niccy.isac, 2);
			return (0);
		} else
			request_region(cs->hw.niccy.isac_ale, 2, "niccy addr");
	} else {
#if CONFIG_PCI
		u_int pci_ioaddr;
		if (!pci_present()) {
			printk(KERN_ERR "Niccy: no PCI bus present\n");
			return(0);
		}
		cs->subtyp = 0;
		if ((niccy_dev = pci_find_device(PCI_VENDOR_ID_SATSAGEM,
			PCI_DEVICE_ID_SATSAGEM_NICCY, niccy_dev))) {
			if (pci_enable_device(niccy_dev))
				return(0);
			/* get IRQ */
			if (!niccy_dev->irq) {
				printk(KERN_WARNING "Niccy: No IRQ for PCI card found\n");
				return(0);
			}
			cs->irq = niccy_dev->irq;
			cs->hw.niccy.cfg_reg = pci_resource_start(niccy_dev, 0);
			if (!cs->hw.niccy.cfg_reg) {
				printk(KERN_WARNING "Niccy: No IO-Adr for PCI cfg found\n");
				return(0);
			}
			pci_ioaddr = pci_resource_start(niccy_dev, 1);
			if (!pci_ioaddr) {
				printk(KERN_WARNING "Niccy: No IO-Adr for PCI card found\n");
				return(0);
			}
			cs->subtyp = NICCY_PCI;
		} else {
			printk(KERN_WARNING "Niccy: No PCI card found\n");
			return(0);
		}
		cs->irq_flags |= SA_SHIRQ;
		cs->hw.niccy.isac = pci_ioaddr + ISAC_PCI_DATA;
		cs->hw.niccy.isac_ale = pci_ioaddr + ISAC_PCI_ADDR;
		cs->hw.niccy.hscx = pci_ioaddr + HSCX_PCI_DATA;
		cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR;
		if (check_region((cs->hw.niccy.isac), 4)) {
			printk(KERN_WARNING
				"HiSax: %s data port %x-%x already in use\n",
				CardType[card->typ],
				cs->hw.niccy.isac,
				cs->hw.niccy.isac + 4);
			return (0);
		} else
			request_region(cs->hw.niccy.isac, 4, "niccy");
		if (check_region(cs->hw.niccy.cfg_reg, 0x40)) {
			printk(KERN_WARNING
			       "HiSax: %s pci port %x-%x already in use\n",
				CardType[card->typ],
				cs->hw.niccy.cfg_reg,
				cs->hw.niccy.cfg_reg + 0x40);
			release_region(cs->hw.niccy.isac, 4);
			return (0);
		} else {
			request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci");
		}
#else
		printk(KERN_WARNING "Niccy: io0 0 and NO_PCI_BIOS\n");
		printk(KERN_WARNING "Niccy: unable to config NICCY PCI\n");
		return (0);
#endif /* CONFIG_PCI */
	}
	printk(KERN_INFO
		"HiSax: %s %s config irq:%d data:0x%X ale:0x%X\n",
		CardType[cs->typ], (cs->subtyp==1) ? "PnP":"PCI",
		cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &niccy_card_msg;
	cs->irq_func = &niccy_interrupt;
	ISACVersion(cs, "Niccy:");
	if (HscxVersion(cs, "Niccy:")) {
		printk(KERN_WARNING
		    "Niccy: wrong HSCX versions check IO address\n");
		release_io_niccy(cs);
		return (0);
	}
	return (1);
}
示例#9
0
int __devinit
setup_telespci(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif

	strcpy(tmp, telespci_revision);
;
	if (cs->typ != ISDN_CTYPE_TELESPCI)
		return (0);

	if ((dev_tel = hisax_find_pci_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) {
		if (pci_enable_device(dev_tel))
			return(0);
		cs->irq = dev_tel->irq;
		if (!cs->irq) {
;
			return(0);
		}
		cs->hw.teles0.membase = ioremap(pci_resource_start(dev_tel, 0),
			PAGE_SIZE);
//		printk(KERN_INFO "Found: Zoran, base-address: 0x%llx, irq: 0x%x\n",
//			(unsigned long long)pci_resource_start(dev_tel, 0),
;
	} else {
;
		return(0);
	}

	/* Initialize Zoran PCI controller */
	writel(0x00000000, cs->hw.teles0.membase + 0x28);
	writel(0x01000000, cs->hw.teles0.membase + 0x28);
	writel(0x01000000, cs->hw.teles0.membase + 0x28);
	writel(0x7BFFFFFF, cs->hw.teles0.membase + 0x2C);
	writel(0x70000000, cs->hw.teles0.membase + 0x3C);
	writel(0x61000000, cs->hw.teles0.membase + 0x40);
	/* writel(0x00800000, cs->hw.teles0.membase + 0x200); */

//	printk(KERN_INFO
//	       "HiSax: Teles PCI config irq:%d mem:%p\n",
//	       cs->irq,
;

	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &TelesPCI_card_msg;
	cs->irq_func = &telespci_interrupt;
	cs->irq_flags |= IRQF_SHARED;
	ISACVersion(cs, "TelesPCI:");
	if (HscxVersion(cs, "TelesPCI:")) {
//		printk(KERN_WARNING
;
		release_io_telespci(cs);
		return (0);
	}
	return (1);
}
示例#10
0
文件: diva.c 项目: nhanh0/hah
int __init
setup_diva(struct IsdnCard *card)
{
	int bytecnt;
	u_char val;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, Diva_revision);
	printk(KERN_INFO "HiSax: Eicon.Diehl Diva driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_DIEHLDIVA)
		return(0);
	cs->hw.diva.status = 0;
	if (card->para[1]) {
		cs->hw.diva.ctrl_reg = 0;
		cs->hw.diva.cfg_reg = card->para[1];
		val = readreg(cs->hw.diva.cfg_reg + DIVA_IPAC_ADR,
			cs->hw.diva.cfg_reg + DIVA_IPAC_DATA, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
		if ((val == 1) || (val==2)) {
			cs->subtyp = DIVA_IPAC_ISA;
			cs->hw.diva.ctrl = 0;
			cs->hw.diva.isac = card->para[1] + DIVA_IPAC_DATA;
			cs->hw.diva.hscx = card->para[1] + DIVA_IPAC_DATA;
			cs->hw.diva.isac_adr = card->para[1] + DIVA_IPAC_ADR;
			cs->hw.diva.hscx_adr = card->para[1] + DIVA_IPAC_ADR;
			test_and_set_bit(HW_IPAC, &cs->HW_Flags);
		} else {
			cs->subtyp = DIVA_ISA;
			cs->hw.diva.ctrl = card->para[1] + DIVA_ISA_CTRL;
			cs->hw.diva.isac = card->para[1] + DIVA_ISA_ISAC_DATA;
			cs->hw.diva.hscx = card->para[1] + DIVA_HSCX_DATA;
			cs->hw.diva.isac_adr = card->para[1] + DIVA_ISA_ISAC_ADR;
			cs->hw.diva.hscx_adr = card->para[1] + DIVA_HSCX_ADR;
		}
		cs->irq = card->para[0];
		bytecnt = 8;
	} else {
#if CONFIG_PCI
		if (!pci_present()) {
			printk(KERN_ERR "Diva: no PCI bus present\n");
			return(0);
		}

		cs->subtyp = 0;
		if ((dev_diva = pci_find_device(PCI_VENDOR_ID_EICON,
			PCI_DEVICE_ID_EICON_DIVA20, dev_diva))) {
			if (pci_enable_device(dev_diva))
				return(0);
			cs->subtyp = DIVA_PCI;
			cs->irq = dev_diva->irq;
			cs->hw.diva.cfg_reg = pci_resource_start(dev_diva, 2);
		} else if ((dev_diva_u = pci_find_device(PCI_VENDOR_ID_EICON,
			PCI_DEVICE_ID_EICON_DIVA20_U, dev_diva_u))) {
			if (pci_enable_device(dev_diva_u))
				return(0);
			cs->subtyp = DIVA_PCI;
			cs->irq = dev_diva_u->irq;
			cs->hw.diva.cfg_reg = pci_resource_start(dev_diva_u, 2);
		} else if ((dev_diva201 = pci_find_device(PCI_VENDOR_ID_EICON,
			PCI_DEVICE_ID_EICON_DIVA201, dev_diva201))) {
			if (pci_enable_device(dev_diva201))
				return(0);
			cs->subtyp = DIVA_IPAC_PCI;
			cs->irq = dev_diva201->irq;
			cs->hw.diva.pci_cfg =
				(ulong) ioremap(pci_resource_start(dev_diva201, 0), 4096);
			cs->hw.diva.cfg_reg =
				(ulong) ioremap(pci_resource_start(dev_diva201, 1), 4096);
		} else {
			printk(KERN_WARNING "Diva: No PCI card found\n");
			return(0);
		}

		if (!cs->irq) {
			printk(KERN_WARNING "Diva: No IRQ for PCI card found\n");
			return(0);
		}

		if (!cs->hw.diva.cfg_reg) {
			printk(KERN_WARNING "Diva: No IO-Adr for PCI card found\n");
			return(0);
		}
		cs->irq_flags |= SA_SHIRQ;
#else
		printk(KERN_WARNING "Diva: cfgreg 0 and NO_PCI_BIOS\n");
		printk(KERN_WARNING "Diva: unable to config DIVA PCI\n");
		return (0);
#endif /* CONFIG_PCI */
		if (cs->subtyp == DIVA_IPAC_PCI) {
			cs->hw.diva.ctrl = 0;
			cs->hw.diva.isac = 0;
			cs->hw.diva.hscx = 0;
			cs->hw.diva.isac_adr = 0;
			cs->hw.diva.hscx_adr = 0;
			test_and_set_bit(HW_IPAC, &cs->HW_Flags);
			bytecnt = 0;
		} else {
			cs->hw.diva.ctrl = cs->hw.diva.cfg_reg + DIVA_PCI_CTRL;
			cs->hw.diva.isac = cs->hw.diva.cfg_reg + DIVA_PCI_ISAC_DATA;
			cs->hw.diva.hscx = cs->hw.diva.cfg_reg + DIVA_HSCX_DATA;
			cs->hw.diva.isac_adr = cs->hw.diva.cfg_reg + DIVA_PCI_ISAC_ADR;
			cs->hw.diva.hscx_adr = cs->hw.diva.cfg_reg + DIVA_HSCX_ADR;
			bytecnt = 32;
		}
	}

	printk(KERN_INFO
		"Diva: %s card configured at %#lx IRQ %d\n",
		(cs->subtyp == DIVA_PCI) ? "PCI" :
		(cs->subtyp == DIVA_ISA) ? "ISA" : 
		(cs->subtyp == DIVA_IPAC_ISA) ? "IPAC ISA" : "IPAC PCI",
		cs->hw.diva.cfg_reg, cs->irq);
	if ((cs->subtyp == DIVA_IPAC_PCI) || (cs->subtyp == DIVA_PCI))
		printk(KERN_INFO "Diva: %s PCI space at %#lx\n",
			(cs->subtyp == DIVA_PCI) ? "PCI" : "IPAC PCI",
			cs->hw.diva.pci_cfg);
	if (cs->subtyp != DIVA_IPAC_PCI) {
		if (check_region(cs->hw.diva.cfg_reg, bytecnt)) {
			printk(KERN_WARNING
			       "HiSax: %s config port %lx-%lx already in use\n",
			       CardType[card->typ],
			       cs->hw.diva.cfg_reg,
			       cs->hw.diva.cfg_reg + bytecnt);
			return (0);
		} else {
			request_region(cs->hw.diva.cfg_reg, bytecnt, "diva isdn");
		}
	}
	reset_diva(cs);
	cs->BC_Read_Reg  = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Diva_card_msg;
	if (cs->subtyp == DIVA_IPAC_ISA) {
		cs->readisac  = &ReadISAC_IPAC;
		cs->writeisac = &WriteISAC_IPAC;
		cs->readisacfifo  = &ReadISACfifo_IPAC;
		cs->writeisacfifo = &WriteISACfifo_IPAC;
		cs->irq_func = &diva_irq_ipac_isa;
		val = readreg(cs->hw.diva.isac_adr, cs->hw.diva.isac, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else if (cs->subtyp == DIVA_IPAC_PCI) {
		cs->readisac  = &MemReadISAC_IPAC;
		cs->writeisac = &MemWriteISAC_IPAC;
		cs->readisacfifo  = &MemReadISACfifo_IPAC;
		cs->writeisacfifo = &MemWriteISACfifo_IPAC;
		cs->BC_Read_Reg  = &MemReadHSCX;
		cs->BC_Write_Reg = &MemWriteHSCX;
		cs->BC_Send_Data = &Memhscx_fill_fifo;
		cs->irq_func = &diva_irq_ipac_pci;
		val = memreadreg(cs->hw.diva.cfg_reg, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else { /* DIVA 2.0 */
		cs->hw.diva.tl.function = (void *) diva_led_handler;
		cs->hw.diva.tl.data = (long) cs;
		init_timer(&cs->hw.diva.tl);
		cs->readisac  = &ReadISAC;
		cs->writeisac = &WriteISAC;
		cs->readisacfifo  = &ReadISACfifo;
		cs->writeisacfifo = &WriteISACfifo;
		cs->irq_func = &diva_interrupt;
		ISACVersion(cs, "Diva:");
		if (HscxVersion(cs, "Diva:")) {
			printk(KERN_WARNING
		       "Diva: wrong HSCX versions check IO address\n");
			release_io_diva(cs);
			return (0);
		}
	}
	return (1);
}
示例#11
0
__initfunc(int
setup_diva(struct IsdnCard *card))
{
	int bytecnt;
	u_char val;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, Diva_revision);
	printk(KERN_INFO "HiSax: Eicon.Diehl Diva driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_DIEHLDIVA)
		return(0);
	cs->hw.diva.status = 0;
	if (card->para[1]) {
		cs->hw.diva.ctrl_reg = 0;
		cs->hw.diva.cfg_reg = card->para[1];
		val = readreg(cs->hw.diva.cfg_reg + DIVA_IPAC_ADR,
			cs->hw.diva.cfg_reg + DIVA_IPAC_DATA, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
		if (val == 1) {
			cs->subtyp = DIVA_IPAC_ISA;
			cs->hw.diva.ctrl = 0;
			cs->hw.diva.isac = card->para[1] + DIVA_IPAC_DATA;
			cs->hw.diva.hscx = card->para[1] + DIVA_IPAC_DATA;
			cs->hw.diva.isac_adr = card->para[1] + DIVA_IPAC_ADR;
			cs->hw.diva.hscx_adr = card->para[1] + DIVA_IPAC_ADR;
			test_and_set_bit(HW_IPAC, &cs->HW_Flags);
		} else {
			cs->subtyp = DIVA_ISA;
			cs->hw.diva.ctrl = card->para[1] + DIVA_ISA_CTRL;
			cs->hw.diva.isac = card->para[1] + DIVA_ISA_ISAC_DATA;
			cs->hw.diva.hscx = card->para[1] + DIVA_HSCX_DATA;
			cs->hw.diva.isac_adr = card->para[1] + DIVA_ISA_ISAC_ADR;
			cs->hw.diva.hscx_adr = card->para[1] + DIVA_HSCX_ADR;
		}
		cs->irq = card->para[0];
		bytecnt = 8;
	} else {
#if CONFIG_PCI
		u_char pci_bus, pci_device_fn, pci_irq;
		u_int pci_ioaddr;

		cs->subtyp = 0;
		for (; pci_index < 0xff; pci_index++) {
			if (pcibios_find_device(PCI_VENDOR_EICON_DIEHL,
			   PCI_DIVA20_ID, pci_index, &pci_bus, &pci_device_fn)
			   == PCIBIOS_SUCCESSFUL)
				cs->subtyp = DIVA_PCI;
			else if (pcibios_find_device(PCI_VENDOR_EICON_DIEHL,
			   PCI_DIVA20_ID, pci_index, &pci_bus, &pci_device_fn)
			   == PCIBIOS_SUCCESSFUL)
			   	cs->subtyp = DIVA_PCI;
			else
				break;
			/* get IRQ */
			pcibios_read_config_byte(pci_bus, pci_device_fn,
				PCI_INTERRUPT_LINE, &pci_irq);

			/* get IO address */
			pcibios_read_config_dword(pci_bus, pci_device_fn,
				PCI_BASE_ADDRESS_2, &pci_ioaddr);
			if (cs->subtyp)
				break;
		}
		if (!cs->subtyp) {
			printk(KERN_WARNING "Diva: No PCI card found\n");
			return(0);
		}
		pci_index++;
		if (!pci_irq) {
			printk(KERN_WARNING "Diva: No IRQ for PCI card found\n");
			return(0);
		}

		if (!pci_ioaddr) {
			printk(KERN_WARNING "Diva: No IO-Adr for PCI card found\n");
			return(0);
		}
		pci_ioaddr &= ~3; /* remove io/mem flag */
		cs->hw.diva.cfg_reg = pci_ioaddr;
		cs->hw.diva.ctrl = pci_ioaddr + DIVA_PCI_CTRL;
		cs->hw.diva.isac = pci_ioaddr + DIVA_PCI_ISAC_DATA;
		cs->hw.diva.hscx = pci_ioaddr + DIVA_HSCX_DATA;
		cs->hw.diva.isac_adr = pci_ioaddr + DIVA_PCI_ISAC_ADR;
		cs->hw.diva.hscx_adr = pci_ioaddr + DIVA_HSCX_ADR;
		cs->irq = pci_irq;
		bytecnt = 32;
#else
		printk(KERN_WARNING "Diva: cfgreg 0 and NO_PCI_BIOS\n");
		printk(KERN_WARNING "Diva: unable to config DIVA PCI\n");
		return (0);
#endif /* CONFIG_PCI */
	}

	printk(KERN_INFO
		"Diva: %s card configured at 0x%x IRQ %d\n",
		(cs->subtyp == DIVA_PCI) ? "PCI" :
		(cs->subtyp == DIVA_ISA) ? "ISA" : "IPAC",
		cs->hw.diva.cfg_reg, cs->irq);
	if (check_region(cs->hw.diva.cfg_reg, bytecnt)) {
		printk(KERN_WARNING
		       "HiSax: %s config port %x-%x already in use\n",
		       CardType[card->typ],
		       cs->hw.diva.cfg_reg,
		       cs->hw.diva.cfg_reg + bytecnt);
		return (0);
	} else {
		request_region(cs->hw.diva.cfg_reg, bytecnt, "diva isdn");
	}

	reset_diva(cs);
	cs->BC_Read_Reg  = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Diva_card_msg;
	if (cs->subtyp == DIVA_IPAC_ISA) {
		cs->readisac  = &ReadISAC_IPAC;
		cs->writeisac = &WriteISAC_IPAC;
		cs->readisacfifo  = &ReadISACfifo_IPAC;
		cs->writeisacfifo = &WriteISACfifo_IPAC;
		val = readreg(cs->hw.diva.isac_adr, cs->hw.diva.isac, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else {
		cs->hw.diva.tl.function = (void *) diva_led_handler;
		cs->hw.diva.tl.data = (long) cs;
		init_timer(&cs->hw.diva.tl);
		cs->readisac  = &ReadISAC;
		cs->writeisac = &WriteISAC;
		cs->readisacfifo  = &ReadISACfifo;
		cs->writeisacfifo = &WriteISACfifo;
		ISACVersion(cs, "Diva:");
		if (HscxVersion(cs, "Diva:")) {
			printk(KERN_WARNING
		       "Diva: wrong HSCX versions check IO address\n");
			release_io_diva(cs);
			return (0);
		}
	}
	return (1);
}
示例#12
0
int __init
setup_asuscom(struct IsdnCard *card)
{
    int bytecnt;
    struct IsdnCardState *cs = card->cs;
    u_char val;
    char tmp[64];

    strcpy(tmp, Asuscom_revision);
    printk(KERN_INFO "HiSax: Asuscom ISDNLink driver Rev. %s\n", HiSax_getrev(tmp));
    if (cs->typ != ISDN_CTYPE_ASUSCOM)
        return (0);
#ifdef __ISAPNP__
    if (!card->para[1] && isapnp_present()) {
        struct pnp_dev *pnp_d;
        while(ipid->card_vendor) {
            if ((pnp_c = pnp_find_card(ipid->card_vendor,
                                       ipid->card_device, pnp_c))) {
                pnp_d = NULL;
                if ((pnp_d = pnp_find_dev(pnp_c,
                                          ipid->vendor, ipid->function, pnp_d))) {
                    int err;

                    printk(KERN_INFO "HiSax: %s detected\n",
                           (char *)ipid->driver_data);
                    pnp_disable_dev(pnp_d);
                    err = pnp_activate_dev(pnp_d);
                    if (err<0) {
                        printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
                               __FUNCTION__, err);
                        return(0);
                    }
                    card->para[1] = pnp_port_start(pnp_d, 0);
                    card->para[0] = pnp_irq(pnp_d, 0);
                    if (!card->para[0] || !card->para[1]) {
                        printk(KERN_ERR "AsusPnP:some resources are missing %ld/%lx\n",
                               card->para[0], card->para[1]);
                        pnp_disable_dev(pnp_d);
                        return(0);
                    }
                    break;
                } else {
                    printk(KERN_ERR "AsusPnP: PnP error card found, no device\n");
                }
            }
            ipid++;
            pnp_c = NULL;
        }
        if (!ipid->card_vendor) {
            printk(KERN_INFO "AsusPnP: no ISAPnP card found\n");
            return(0);
        }
    }
#endif
    bytecnt = 8;
    cs->hw.asus.cfg_reg = card->para[1];
    cs->irq = card->para[0];
    if (!request_region(cs->hw.asus.cfg_reg, bytecnt, "asuscom isdn")) {
        printk(KERN_WARNING
               "HiSax: %s config port %x-%x already in use\n",
               CardType[card->typ],
               cs->hw.asus.cfg_reg,
               cs->hw.asus.cfg_reg + bytecnt);
        return (0);
    }
    printk(KERN_INFO "ISDNLink: defined at 0x%x IRQ %d\n",
           cs->hw.asus.cfg_reg, cs->irq);
    setup_isac(cs);
    cs->BC_Read_Reg = &ReadHSCX;
    cs->BC_Write_Reg = &WriteHSCX;
    cs->BC_Send_Data = &hscx_fill_fifo;
    cs->cardmsg = &Asus_card_msg;
    val = readreg(cs->hw.asus.cfg_reg + ASUS_IPAC_ALE,
                  cs->hw.asus.cfg_reg + ASUS_IPAC_DATA, IPAC_ID);
    if ((val == 1) || (val == 2)) {
        cs->subtyp = ASUS_IPAC;
        cs->hw.asus.adr  = cs->hw.asus.cfg_reg + ASUS_IPAC_ALE;
        cs->hw.asus.isac = cs->hw.asus.cfg_reg + ASUS_IPAC_DATA;
        cs->hw.asus.hscx = cs->hw.asus.cfg_reg + ASUS_IPAC_DATA;
        test_and_set_bit(HW_IPAC, &cs->HW_Flags);
        cs->readisac = &ReadISAC_IPAC;
        cs->writeisac = &WriteISAC_IPAC;
        cs->readisacfifo = &ReadISACfifo_IPAC;
        cs->writeisacfifo = &WriteISACfifo_IPAC;
        cs->irq_func = &asuscom_interrupt_ipac;
        printk(KERN_INFO "Asus: IPAC version %x\n", val);
    } else {
        cs->subtyp = ASUS_ISACHSCX;
        cs->hw.asus.adr = cs->hw.asus.cfg_reg + ASUS_ADR;
        cs->hw.asus.isac = cs->hw.asus.cfg_reg + ASUS_ISAC;
        cs->hw.asus.hscx = cs->hw.asus.cfg_reg + ASUS_HSCX;
        cs->hw.asus.u7 = cs->hw.asus.cfg_reg + ASUS_CTRL_U7;
        cs->hw.asus.pots = cs->hw.asus.cfg_reg + ASUS_CTRL_POTS;
        cs->readisac = &ReadISAC;
        cs->writeisac = &WriteISAC;
        cs->readisacfifo = &ReadISACfifo;
        cs->writeisacfifo = &WriteISACfifo;
        cs->irq_func = &asuscom_interrupt;
        ISACVersion(cs, "ISDNLink:");
        if (HscxVersion(cs, "ISDNLink:")) {
            printk(KERN_WARNING
                   "ISDNLink: wrong HSCX versions check IO address\n");
            release_io_asuscom(cs);
            return (0);
        }
    }
    return (1);
}
示例#13
0
文件: isurf.c 项目: robacklin/ts4700
int __devinit
setup_isurf(struct IsdnCard *card)
{
	int ver;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, ISurf_revision);
	printk(KERN_INFO "HiSax: ISurf driver Rev. %s\n", HiSax_getrev(tmp));
	
 	if (cs->typ != ISDN_CTYPE_ISURF)
 		return(0);
	if (card->para[1] && card->para[2]) {
		cs->hw.isurf.reset = card->para[1];
		cs->hw.isurf.phymem = card->para[2];
		cs->irq = card->para[0];
	} else {
#ifdef __ISAPNP__
		if (isapnp_present()) {
			struct pnp_dev *pnp_d = NULL;
			int err;

			cs->subtyp = 0;
			if ((pnp_c = pnp_find_card(
				ISAPNP_VENDOR('S', 'I', 'E'),
				ISAPNP_FUNCTION(0x0010), pnp_c))) {
				if (!(pnp_d = pnp_find_dev(pnp_c,
					ISAPNP_VENDOR('S', 'I', 'E'),
					ISAPNP_FUNCTION(0x0010), pnp_d))) {
					printk(KERN_ERR "ISurfPnP: PnP error card found, no device\n");
					return (0);
				}
				pnp_disable_dev(pnp_d);
				err = pnp_activate_dev(pnp_d);
				cs->hw.isurf.reset = pnp_port_start(pnp_d, 0);
				cs->hw.isurf.phymem = pnp_mem_start(pnp_d, 1);
				cs->irq = pnp_irq(pnp_d, 0);
				if (!cs->irq || !cs->hw.isurf.reset || !cs->hw.isurf.phymem) {
					printk(KERN_ERR "ISurfPnP:some resources are missing %d/%x/%lx\n",
						cs->irq, cs->hw.isurf.reset, cs->hw.isurf.phymem);
					pnp_disable_dev(pnp_d);
					return(0);
				}
			} else {
				printk(KERN_INFO "ISurfPnP: no ISAPnP card found\n");
				return(0);
			}
		} else {
			printk(KERN_INFO "ISurfPnP: no ISAPnP bus found\n");
			return(0);
		}
#else
		printk(KERN_WARNING "HiSax: Siemens I-Surf port/mem not set\n");
		return (0);
#endif
	}
	if (!request_region(cs->hw.isurf.reset, 1, "isurf isdn")) {
		printk(KERN_WARNING
			"HiSax: Siemens I-Surf config port %x already in use\n",
			cs->hw.isurf.reset);
			return (0);
	}
	if (!request_region(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE, "isurf iomem")) {
		printk(KERN_WARNING "HiSax: Siemens I-Surf memory region "
			"%lx-%lx already in use\n",
			cs->hw.isurf.phymem,
			cs->hw.isurf.phymem + ISURF_IOMEM_SIZE);
		release_region(cs->hw.isurf.reset, 1);
		return (0);
	}
	cs->hw.isurf.isar = ioremap(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE);
	cs->hw.isurf.isac = cs->hw.isurf.isar + ISURF_ISAC_OFFSET;
	printk(KERN_INFO
	       "ISurf: defined at 0x%x 0x%lx IRQ %d\n",
	       cs->hw.isurf.reset,
	       cs->hw.isurf.phymem,
	       cs->irq);

	setup_isac(cs);
	cs->cardmsg = &ISurf_card_msg;
	cs->irq_func = &isurf_interrupt;
	cs->auxcmd = &isurf_auxcmd;
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->bcs[0].hw.isar.reg = &cs->hw.isurf.isar_r;
	cs->bcs[1].hw.isar.reg = &cs->hw.isurf.isar_r;
	test_and_set_bit(HW_ISAR, &cs->HW_Flags);
	ISACVersion(cs, "ISurf:");
	cs->BC_Read_Reg = &ReadISAR;
	cs->BC_Write_Reg = &WriteISAR;
	cs->BC_Send_Data = &isar_fill_fifo;
	ver = ISARVersion(cs, "ISurf:");
	if (ver < 0) {
		printk(KERN_WARNING
			"ISurf: wrong ISAR version (ret = %d)\n", ver);
		release_io_isurf(cs);
		return (0);
	}
	return (1);
}
示例#14
0
文件: diva.c 项目: asmalldev/linux
static int setup_diva_common(struct IsdnCardState *cs)
{
	int bytecnt;
	u_char val;

	if ((cs->subtyp == DIVA_ISA) || (cs->subtyp == DIVA_IPAC_ISA))
		bytecnt = 8;
	else
		bytecnt = 32;

	printk(KERN_INFO
	       "Diva: %s card configured at %#lx IRQ %d\n",
	       (cs->subtyp == DIVA_PCI) ? "PCI" :
	       (cs->subtyp == DIVA_ISA) ? "ISA" :
	       (cs->subtyp == DIVA_IPAC_ISA) ? "IPAC ISA" :
	       (cs->subtyp == DIVA_IPAC_PCI) ? "IPAC PCI" : "IPACX PCI",
	       cs->hw.diva.cfg_reg, cs->irq);
	if ((cs->subtyp == DIVA_IPAC_PCI)  ||
	    (cs->subtyp == DIVA_IPACX_PCI) ||
	    (cs->subtyp == DIVA_PCI))
		printk(KERN_INFO "Diva: %s space at %#lx\n",
		       (cs->subtyp == DIVA_PCI) ? "PCI" :
		       (cs->subtyp == DIVA_IPAC_PCI) ? "IPAC PCI" : "IPACX PCI",
		       cs->hw.diva.pci_cfg);
	if ((cs->subtyp != DIVA_IPAC_PCI) &&
	    (cs->subtyp != DIVA_IPACX_PCI)) {
		if (!request_region(cs->hw.diva.cfg_reg, bytecnt, "diva isdn")) {
			printk(KERN_WARNING
			       "HiSax: %s config port %lx-%lx already in use\n",
			       "diva",
			       cs->hw.diva.cfg_reg,
			       cs->hw.diva.cfg_reg + bytecnt);
			iounmap_diva(cs);
			return (0);
		}
	}
	cs->BC_Read_Reg  = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Diva_card_msg;
	setup_isac(cs);
	if (cs->subtyp == DIVA_IPAC_ISA) {
		cs->readisac  = &ReadISAC_IPAC;
		cs->writeisac = &WriteISAC_IPAC;
		cs->readisacfifo  = &ReadISACfifo_IPAC;
		cs->writeisacfifo = &WriteISACfifo_IPAC;
		cs->irq_func = &diva_irq_ipac_isa;
		val = readreg(cs->hw.diva.isac_adr, cs->hw.diva.isac, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else if (cs->subtyp == DIVA_IPAC_PCI) {
		cs->readisac  = &MemReadISAC_IPAC;
		cs->writeisac = &MemWriteISAC_IPAC;
		cs->readisacfifo  = &MemReadISACfifo_IPAC;
		cs->writeisacfifo = &MemWriteISACfifo_IPAC;
		cs->BC_Read_Reg  = &MemReadHSCX;
		cs->BC_Write_Reg = &MemWriteHSCX;
		cs->BC_Send_Data = &Memhscx_fill_fifo;
		cs->irq_func = &diva_irq_ipac_pci;
		val = memreadreg(cs->hw.diva.cfg_reg, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else if (cs->subtyp == DIVA_IPACX_PCI) {
		cs->readisac  = &MemReadISAC_IPACX;
		cs->writeisac = &MemWriteISAC_IPACX;
		cs->readisacfifo  = &MemReadISACfifo_IPACX;
		cs->writeisacfifo = &MemWriteISACfifo_IPACX;
		cs->BC_Read_Reg  = &MemReadHSCX_IPACX;
		cs->BC_Write_Reg = &MemWriteHSCX_IPACX;
		cs->BC_Send_Data = NULL; // function located in ipacx module
		cs->irq_func = &diva_irq_ipacx_pci;
		printk(KERN_INFO "Diva: IPACX Design Id: %x\n",
		       MemReadISAC_IPACX(cs, IPACX_ID) & 0x3F);
	} else { /* DIVA 2.0 */
		setup_timer(&cs->hw.diva.tl, (void *)diva_led_handler,
			    (long)cs);
		cs->readisac  = &ReadISAC;
		cs->writeisac = &WriteISAC;
		cs->readisacfifo  = &ReadISACfifo;
		cs->writeisacfifo = &WriteISACfifo;
		cs->irq_func = &diva_interrupt;
		ISACVersion(cs, "Diva:");
		if (HscxVersion(cs, "Diva:")) {
			printk(KERN_WARNING
			       "Diva: wrong HSCX versions check IO address\n");
			release_io_diva(cs);
			return (0);
		}
	}
	return (1);
}
示例#15
0
int __init
setup_netjet_s(struct IsdnCard *card)
{
    int bytecnt;
    struct IsdnCardState *cs = card->cs;
    char tmp[64];
    long flags;

#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif
    strcpy(tmp, NETjet_S_revision);
    printk(KERN_INFO "HiSax: Traverse Tech. NETjet-S driver Rev. %s\n", HiSax_getrev(tmp));
    if (cs->typ != ISDN_CTYPE_NETJET_S)
        return(0);
    test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);

#if CONFIG_PCI

    for ( ;; )
    {
        if (!pci_present()) {
            printk(KERN_ERR "Netjet: no PCI bus present\n");
            return(0);
        }
        if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
                                          PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
            if (pci_enable_device(dev_netjet))
                return(0);
            pci_set_master(dev_netjet);
            cs->irq = dev_netjet->irq;
            if (!cs->irq) {
                printk(KERN_WARNING "NETjet-S: No IRQ for PCI card found\n");
                return(0);
            }
            cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
            if (!cs->hw.njet.base) {
                printk(KERN_WARNING "NETjet-S: No IO-Adr for PCI card found\n");
                return(0);
            }
        } else {
            printk(KERN_WARNING "NETjet-S: No PCI card found\n");
            return(0);
        }

        cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA;
        cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF;

        save_flags(flags);
        sti();

        cs->hw.njet.ctrl_reg = 0xff;  /* Reset On */
        byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);

        set_current_state(TASK_UNINTERRUPTIBLE);
        schedule_timeout((10*HZ)/1000);	/* Timeout 10ms */

        cs->hw.njet.ctrl_reg = 0x00;  /* Reset Off and status read clear */
        byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);

        set_current_state(TASK_UNINTERRUPTIBLE);
        schedule_timeout((10*HZ)/1000);	/* Timeout 10ms */

        restore_flags(flags);

        cs->hw.njet.auxd = 0xC0;
        cs->hw.njet.dmactrl = 0;

        byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ);
        byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ);
        byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);

        switch ( ( ( NETjet_ReadIC( cs, ISAC_RBCH ) >> 5 ) & 3 ) )
        {
        case 0 :
            break;

        case 3 :
            printk( KERN_WARNING "NETjet-S: NETspider-U PCI card found\n" );
            continue;

        default :
            printk( KERN_WARNING "NETjet-S: No PCI card found\n" );
            return 0;
        }
        break;
    }
#else

    printk(KERN_WARNING "NETjet-S: NO_PCI_BIOS\n");
    printk(KERN_WARNING "NETjet-S: unable to config NETJET-S PCI\n");
    return (0);

#endif /* CONFIG_PCI */

    bytecnt = 256;

    printk(KERN_INFO
           "NETjet-S: PCI card configured at %#lx IRQ %d\n",
           cs->hw.njet.base, cs->irq);
    if (check_region(cs->hw.njet.base, bytecnt)) {
        printk(KERN_WARNING
               "HiSax: %s config port %#lx-%#lx already in use\n",
               CardType[card->typ],
               cs->hw.njet.base,
               cs->hw.njet.base + bytecnt);
        return (0);
    } else {
        request_region(cs->hw.njet.base, bytecnt, "netjet-s isdn");
    }
    reset_netjet_s(cs);
    cs->readisac  = &NETjet_ReadIC;
    cs->writeisac = &NETjet_WriteIC;
    cs->readisacfifo  = &NETjet_ReadICfifo;
    cs->writeisacfifo = &NETjet_WriteICfifo;
    cs->BC_Read_Reg  = &dummyrr;
    cs->BC_Write_Reg = &dummywr;
    cs->BC_Send_Data = &netjet_fill_dma;
    cs->cardmsg = &NETjet_S_card_msg;
    cs->irq_func = &netjet_s_interrupt;
    cs->irq_flags |= SA_SHIRQ;
    ISACVersion(cs, "NETjet-S:");
    return (1);
}
示例#16
0
int __devinit
setup_sedlbauer(struct IsdnCard *card)
{
	int bytecnt, ver, val;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];
	u16 sub_vendor_id, sub_id;

	strcpy(tmp, Sedlbauer_revision);
	printk(KERN_INFO "HiSax: Sedlbauer driver Rev. %s\n", HiSax_getrev(tmp));
	
 	if (cs->typ == ISDN_CTYPE_SEDLBAUER) {
 		cs->subtyp = SEDL_SPEED_CARD_WIN;
		cs->hw.sedl.bus = SEDL_BUS_ISA;
		cs->hw.sedl.chip = SEDL_CHIP_TEST;
 	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_PCMCIA) {	
 		cs->subtyp = SEDL_SPEED_STAR;
		cs->hw.sedl.bus = SEDL_BUS_PCMCIA;
		cs->hw.sedl.chip = SEDL_CHIP_TEST;
 	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_FAX) {	
 		cs->subtyp = SEDL_SPEED_FAX;
		cs->hw.sedl.bus = SEDL_BUS_ISA;
		cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
 	} else
		return (0);

	bytecnt = 8;
	if (card->para[1]) {
		cs->hw.sedl.cfg_reg = card->para[1];
		cs->irq = card->para[0];
		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
			bytecnt = 16;
		}
	} else {
#ifdef __ISAPNP__
		if (isapnp_present()) {
			struct pnp_dev *pnp_d;
			while(ipid->card_vendor) {
				if ((pnp_c = pnp_find_card(ipid->card_vendor,
					ipid->card_device, pnp_c))) {
					pnp_d = NULL;
					if ((pnp_d = pnp_find_dev(pnp_c,
						ipid->vendor, ipid->function, pnp_d))) {
						int err;

						printk(KERN_INFO "HiSax: %s detected\n",
							(char *)ipid->driver_data);
						pnp_disable_dev(pnp_d);
						err = pnp_activate_dev(pnp_d);
						if (err<0) {
							printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
								__FUNCTION__, err);
							return(0);
						}
						card->para[1] = pnp_port_start(pnp_d, 0);
						card->para[0] = pnp_irq(pnp_d, 0);

						if (!card->para[0] || !card->para[1]) {
							printk(KERN_ERR "Sedlbauer PnP:some resources are missing %ld/%lx\n",
								card->para[0], card->para[1]);
							pnp_disable_dev(pnp_d);
							return(0);
						}
						cs->hw.sedl.cfg_reg = card->para[1];
						cs->irq = card->para[0];
						if (ipid->function == ISAPNP_FUNCTION(0x2)) {
							cs->subtyp = SEDL_SPEED_FAX;
							cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
							bytecnt = 16;
						} else {
							cs->subtyp = SEDL_SPEED_CARD_WIN;
							cs->hw.sedl.chip = SEDL_CHIP_TEST;
						}
						goto ready;
					} else {
						printk(KERN_ERR "Sedlbauer PnP: PnP error card found, no device\n");
						return(0);
					}
				}
				ipid++;
				pnp_c = NULL;
			} 
			if (!ipid->card_vendor) {
				printk(KERN_INFO "Sedlbauer PnP: no ISAPnP card found\n");
			}
		}
#endif
/* Probe for Sedlbauer speed pci */
#ifdef CONFIG_PCI
		if ((dev_sedl = pci_find_device(PCI_VENDOR_ID_TIGERJET,
				PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
			if (pci_enable_device(dev_sedl))
				return(0);
			cs->irq = dev_sedl->irq;
			if (!cs->irq) {
				printk(KERN_WARNING "Sedlbauer: No IRQ for PCI card found\n");
				return(0);
			}
			cs->hw.sedl.cfg_reg = pci_resource_start(dev_sedl, 0);
		} else {
			printk(KERN_WARNING "Sedlbauer: No PCI card found\n");
			return(0);
		}
		cs->irq_flags |= IRQF_SHARED;
		cs->hw.sedl.bus = SEDL_BUS_PCI;
		sub_vendor_id = dev_sedl->subsystem_vendor;
		sub_id = dev_sedl->subsystem_device;
		printk(KERN_INFO "Sedlbauer: PCI subvendor:%x subid %x\n",
			sub_vendor_id, sub_id);
		printk(KERN_INFO "Sedlbauer: PCI base adr %#x\n",
			cs->hw.sedl.cfg_reg);
		if (sub_id != PCI_SUB_ID_SEDLBAUER) {
			printk(KERN_ERR "Sedlbauer: unknown sub id %#x\n", sub_id);
			return(0);
		}
		if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PYRAMID) {
			cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
			cs->subtyp = SEDL_SPEEDFAX_PYRAMID;
		} else if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PCI) {
			cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
			cs->subtyp = SEDL_SPEEDFAX_PCI;
		} else if (sub_vendor_id == PCI_SUBVENDOR_HST_SAPHIR3) {
			cs->hw.sedl.chip = SEDL_CHIP_IPAC;
			cs->subtyp = HST_SAPHIR3;
		} else if (sub_vendor_id == PCI_SUBVENDOR_SEDLBAUER_PCI) {
			cs->hw.sedl.chip = SEDL_CHIP_IPAC;
			cs->subtyp = SEDL_SPEED_PCI;
		} else {
			printk(KERN_ERR "Sedlbauer: unknown sub vendor id %#x\n",
				sub_vendor_id);
			return(0);
		}
		bytecnt = 256;
		cs->hw.sedl.reset_on = SEDL_ISAR_PCI_ISAR_RESET_ON;
		cs->hw.sedl.reset_off = SEDL_ISAR_PCI_ISAR_RESET_OFF;
		byteout(cs->hw.sedl.cfg_reg, 0xff);
		byteout(cs->hw.sedl.cfg_reg, 0x00);
		byteout(cs->hw.sedl.cfg_reg+ 2, 0xdd);
		byteout(cs->hw.sedl.cfg_reg+ 5, 0x02);
		byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_on);
		mdelay(2);
		byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
		mdelay(10);
#else
		printk(KERN_WARNING "Sedlbauer: NO_PCI_BIOS\n");
		return (0);
#endif /* CONFIG_PCI */
	}	

#ifdef __ISAPNP__
ready:	
#endif

	/* In case of the sedlbauer pcmcia card, this region is in use,
	 * reserved for us by the card manager. So we do not check it
	 * here, it would fail.
	 */
	if (cs->hw.sedl.bus != SEDL_BUS_PCMCIA &&
		!request_region(cs->hw.sedl.cfg_reg, bytecnt, "sedlbauer isdn")) {
		printk(KERN_WARNING
			"HiSax: %s config port %x-%x already in use\n",
			CardType[card->typ],
			cs->hw.sedl.cfg_reg,
			cs->hw.sedl.cfg_reg + bytecnt);
			return (0);
	}

	printk(KERN_INFO
	       "Sedlbauer: defined at 0x%x-0x%x IRQ %d\n",
	       cs->hw.sedl.cfg_reg,
	       cs->hw.sedl.cfg_reg + bytecnt,
	       cs->irq);

	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Sedl_card_msg;

/*
 * testing ISA and PCMCIA Cards for IPAC, default is ISAC
 * do not test for PCI card, because ports are different
 * and PCI card uses only IPAC (for the moment)
 */	
	if (cs->hw.sedl.bus != SEDL_BUS_PCI) {
		val = readreg(cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR,
			cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC, IPAC_ID);
		printk(KERN_DEBUG "Sedlbauer: testing IPAC version %x\n", val);
	        if ((val == 1) || (val == 2)) {
			/* IPAC */
			cs->subtyp = SEDL_SPEED_WIN2_PC104;
			if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
				cs->subtyp = SEDL_SPEED_STAR2;
			}
			cs->hw.sedl.chip = SEDL_CHIP_IPAC;
		} else {
			/* ISAC_HSCX oder ISAC_ISAR */
			if (cs->hw.sedl.chip == SEDL_CHIP_TEST) {
				cs->hw.sedl.chip = SEDL_CHIP_ISAC_HSCX;
			}
		}
	}

/*
 * hw.sedl.chip is now properly set
 */
	printk(KERN_INFO "Sedlbauer: %s detected\n",
		Sedlbauer_Types[cs->subtyp]);

	setup_isac(cs);
	if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
		if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
	                cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
		} else {
	                cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
		}
		test_and_set_bit(HW_IPAC, &cs->HW_Flags);
		cs->readisac = &ReadISAC_IPAC;
		cs->writeisac = &WriteISAC_IPAC;
		cs->readisacfifo = &ReadISACfifo_IPAC;
		cs->writeisacfifo = &WriteISACfifo_IPAC;
		cs->irq_func = &sedlbauer_interrupt_ipac;
		val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ID);
		printk(KERN_INFO "Sedlbauer: IPAC version %x\n", val);
	} else {
		/* ISAC_HSCX oder ISAC_ISAR */
		cs->readisac = &ReadISAC;
		cs->writeisac = &WriteISAC;
		cs->readisacfifo = &ReadISACfifo;
		cs->writeisacfifo = &WriteISACfifo;
		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
			if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ISAR;
			} else {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR;
				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR_RESET_ON;
				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR_RESET_OFF;
			}
			cs->bcs[0].hw.isar.reg = &cs->hw.sedl.isar;
			cs->bcs[1].hw.isar.reg = &cs->hw.sedl.isar;
			test_and_set_bit(HW_ISAR, &cs->HW_Flags);
			cs->irq_func = &sedlbauer_interrupt_isar;
			cs->auxcmd = &isar_auxcmd;
			ISACVersion(cs, "Sedlbauer:");
			cs->BC_Read_Reg = &ReadISAR;
			cs->BC_Write_Reg = &WriteISAR;
			cs->BC_Send_Data = &isar_fill_fifo;
			bytecnt = 3;
			while (bytecnt) {
				ver = ISARVersion(cs, "Sedlbauer:");
				if (ver < 0)
					printk(KERN_WARNING
						"Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
				else
					break;
				reset_sedlbauer(cs);
				bytecnt--;
			}
			if (!bytecnt) {
				release_io_sedlbauer(cs);
				return (0);
			}
		} else {
			if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_HSCX;
				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
				cs->irq_flags |= IRQF_SHARED;
			} else {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_HSCX;
				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_ON;
				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_OFF;
			}
			cs->irq_func = &sedlbauer_interrupt;
			ISACVersion(cs, "Sedlbauer:");
		
			if (HscxVersion(cs, "Sedlbauer:")) {
				printk(KERN_WARNING
					"Sedlbauer: wrong HSCX versions check IO address\n");
				release_io_sedlbauer(cs);
				return (0);
			}
		}
	}
	return (1);
}
int __devinit
setup_sedlbauer(struct IsdnCard *card)
{
	int bytecnt = 8, ver, val, rc;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, Sedlbauer_revision);
	printk(KERN_INFO "HiSax: Sedlbauer driver Rev. %s\n", HiSax_getrev(tmp));
	
 	if (cs->typ == ISDN_CTYPE_SEDLBAUER) {
 		cs->subtyp = SEDL_SPEED_CARD_WIN;
		cs->hw.sedl.bus = SEDL_BUS_ISA;
		cs->hw.sedl.chip = SEDL_CHIP_TEST;
 	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_PCMCIA) {	
 		cs->subtyp = SEDL_SPEED_STAR;
		cs->hw.sedl.bus = SEDL_BUS_PCMCIA;
		cs->hw.sedl.chip = SEDL_CHIP_TEST;
 	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_FAX) {	
 		cs->subtyp = SEDL_SPEED_FAX;
		cs->hw.sedl.bus = SEDL_BUS_ISA;
		cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
 	} else
		return (0);

	bytecnt = 8;
	if (card->para[1]) {
		cs->hw.sedl.cfg_reg = card->para[1];
		cs->irq = card->para[0];
		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
			bytecnt = 16;
		}
	} else {
		rc = setup_sedlbauer_isapnp(card, &bytecnt);
		if (!rc)
			return (0);
		if (rc > 0)
			goto ready;

		/* Probe for Sedlbauer speed pci */
		rc = setup_sedlbauer_pci(card);
		if (!rc)
			return (0);

		bytecnt = 256;
	}	

ready:	

	/* In case of the sedlbauer pcmcia card, this region is in use,
	 * reserved for us by the card manager. So we do not check it
	 * here, it would fail.
	 */
	if (cs->hw.sedl.bus != SEDL_BUS_PCMCIA &&
		!request_region(cs->hw.sedl.cfg_reg, bytecnt, "sedlbauer isdn")) {
		printk(KERN_WARNING
			"HiSax: %s config port %x-%x already in use\n",
			CardType[card->typ],
			cs->hw.sedl.cfg_reg,
			cs->hw.sedl.cfg_reg + bytecnt);
			return (0);
	}

	printk(KERN_INFO
	       "Sedlbauer: defined at 0x%x-0x%x IRQ %d\n",
	       cs->hw.sedl.cfg_reg,
	       cs->hw.sedl.cfg_reg + bytecnt,
	       cs->irq);

	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Sedl_card_msg;

/*
 * testing ISA and PCMCIA Cards for IPAC, default is ISAC
 * do not test for PCI card, because ports are different
 * and PCI card uses only IPAC (for the moment)
 */	
	if (cs->hw.sedl.bus != SEDL_BUS_PCI) {
		val = readreg(cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR,
			cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC, IPAC_ID);
		printk(KERN_DEBUG "Sedlbauer: testing IPAC version %x\n", val);
	        if ((val == 1) || (val == 2)) {
			/* IPAC */
			cs->subtyp = SEDL_SPEED_WIN2_PC104;
			if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
				cs->subtyp = SEDL_SPEED_STAR2;
			}
			cs->hw.sedl.chip = SEDL_CHIP_IPAC;
		} else {
			/* ISAC_HSCX oder ISAC_ISAR */
			if (cs->hw.sedl.chip == SEDL_CHIP_TEST) {
				cs->hw.sedl.chip = SEDL_CHIP_ISAC_HSCX;
			}
		}
	}

/*
 * hw.sedl.chip is now properly set
 */
	printk(KERN_INFO "Sedlbauer: %s detected\n",
		Sedlbauer_Types[cs->subtyp]);

	setup_isac(cs);
	if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
		if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
	                cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
		} else {
	                cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
		}
		test_and_set_bit(HW_IPAC, &cs->HW_Flags);
		cs->readisac = &ReadISAC_IPAC;
		cs->writeisac = &WriteISAC_IPAC;
		cs->readisacfifo = &ReadISACfifo_IPAC;
		cs->writeisacfifo = &WriteISACfifo_IPAC;
		cs->irq_func = &sedlbauer_interrupt_ipac;
		val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ID);
		printk(KERN_INFO "Sedlbauer: IPAC version %x\n", val);
	} else {
		/* ISAC_HSCX oder ISAC_ISAR */
		cs->readisac = &ReadISAC;
		cs->writeisac = &WriteISAC;
		cs->readisacfifo = &ReadISACfifo;
		cs->writeisacfifo = &WriteISACfifo;
		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
			if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ISAR;
			} else {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR;
				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR_RESET_ON;
				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR_RESET_OFF;
			}
			cs->bcs[0].hw.isar.reg = &cs->hw.sedl.isar;
			cs->bcs[1].hw.isar.reg = &cs->hw.sedl.isar;
			test_and_set_bit(HW_ISAR, &cs->HW_Flags);
			cs->irq_func = &sedlbauer_interrupt_isar;
			cs->auxcmd = &isar_auxcmd;
			ISACVersion(cs, "Sedlbauer:");
			cs->BC_Read_Reg = &ReadISAR;
			cs->BC_Write_Reg = &WriteISAR;
			cs->BC_Send_Data = &isar_fill_fifo;
			bytecnt = 3;
			while (bytecnt) {
				ver = ISARVersion(cs, "Sedlbauer:");
				if (ver < 0)
					printk(KERN_WARNING
						"Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
				else
					break;
				reset_sedlbauer(cs);
				bytecnt--;
			}
			if (!bytecnt) {
				release_io_sedlbauer(cs);
				return (0);
			}
		} else {
			if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_HSCX;
				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
				cs->irq_flags |= IRQF_SHARED;
			} else {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_HSCX;
				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_ON;
				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_OFF;
			}
			cs->irq_func = &sedlbauer_interrupt;
			ISACVersion(cs, "Sedlbauer:");
		
			if (HscxVersion(cs, "Sedlbauer:")) {
				printk(KERN_WARNING
					"Sedlbauer: wrong HSCX versions check IO address\n");
				release_io_sedlbauer(cs);
				return (0);
			}
		}
	}
	return (1);
}
示例#18
0
文件: isurf.c 项目: TitaniumBoy/lin
int __init
setup_isurf(struct IsdnCard *card)
{
	int ver;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, ISurf_revision);
	printk(KERN_INFO "HiSax: ISurf driver Rev. %s\n", HiSax_getrev(tmp));
	
 	if (cs->typ != ISDN_CTYPE_ISURF)
 		return(0);
	if (card->para[1] && card->para[2]) {
		cs->hw.isurf.reset = card->para[1];
		cs->hw.isurf.phymem = card->para[2];
		cs->irq = card->para[0];
	} else {
		printk(KERN_WARNING "HiSax: %s port/mem not set\n",
			CardType[card->typ]);
		return (0);
	}
	if (check_region(cs->hw.isurf.reset, 1)) {
		printk(KERN_WARNING
			"HiSax: %s config port %x already in use\n",
			CardType[card->typ],
			cs->hw.isurf.reset);
			return (0);
	} else {
		request_region(cs->hw.isurf.reset, 1, "isurf isdn");
	}
	if (check_mem_region(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE)) {
		printk(KERN_WARNING
			"HiSax: %s memory region %lx-%lx already in use\n",
			CardType[card->typ],
			cs->hw.isurf.phymem,
			cs->hw.isurf.phymem + ISURF_IOMEM_SIZE);
		release_region(cs->hw.isurf.reset, 1);
		return (0);
	} else {
		request_mem_region(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE,
			"isurf iomem");
	}
	cs->hw.isurf.isar =
		(unsigned long) ioremap(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE);
	cs->hw.isurf.isac = cs->hw.isurf.isar + ISURF_ISAC_OFFSET;
	printk(KERN_INFO
	       "ISurf: defined at 0x%x 0x%lx IRQ %d\n",
	       cs->hw.isurf.reset,
	       cs->hw.isurf.phymem,
	       cs->irq);

	cs->cardmsg = &ISurf_card_msg;
	cs->irq_func = &isurf_interrupt;
	cs->auxcmd = &isurf_auxcmd;
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->bcs[0].hw.isar.reg = &cs->hw.isurf.isar_r;
	cs->bcs[1].hw.isar.reg = &cs->hw.isurf.isar_r;
	reset_isurf(cs, ISURF_RESET);
	test_and_set_bit(HW_ISAR, &cs->HW_Flags);
	ISACVersion(cs, "ISurf:");
	cs->BC_Read_Reg = &ReadISAR;
	cs->BC_Write_Reg = &WriteISAR;
	cs->BC_Send_Data = &isar_fill_fifo;
	ver = ISARVersion(cs, "ISurf:");
	if (ver < 0) {
		printk(KERN_WARNING
			"ISurf: wrong ISAR version (ret = %d)\n", ver);
		release_io_isurf(cs);
		return (0);
	}
	return (1);
}
示例#19
0
int __devinit
setup_sedlbauer(struct IsdnCard *card)
{
	int bytecnt, ver, val;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];
	u16 sub_vendor_id, sub_id;
	long flags;

	strcpy(tmp, Sedlbauer_revision);
	printk(KERN_INFO "HiSax: Sedlbauer driver Rev. %s\n", HiSax_getrev(tmp));
	
 	if (cs->typ == ISDN_CTYPE_SEDLBAUER) {
 		cs->subtyp = SEDL_SPEED_CARD_WIN;
		cs->hw.sedl.bus = SEDL_BUS_ISA;
		cs->hw.sedl.chip = SEDL_CHIP_TEST;
 	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_PCMCIA) {	
 		cs->subtyp = SEDL_SPEED_STAR;
		cs->hw.sedl.bus = SEDL_BUS_PCMCIA;
		cs->hw.sedl.chip = SEDL_CHIP_TEST;
 	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_FAX) {	
 		cs->subtyp = SEDL_SPEED_FAX;
		cs->hw.sedl.bus = SEDL_BUS_ISA;
		cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
 	} else
		return (0);

	bytecnt = 8;
	if (card->para[1]) {
		cs->hw.sedl.cfg_reg = card->para[1];
		cs->irq = card->para[0];
		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
			bytecnt = 16;
		}
	} else {
/* Probe for Sedlbauer speed pci */
#if CONFIG_PCI
		if (!pci_present()) {
			printk(KERN_ERR "Sedlbauer: no PCI bus present\n");
			return(0);
		}
		if ((dev_sedl = pci_find_device(PCI_VENDOR_ID_TIGERJET,
				PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
			if (pci_enable_device(dev_sedl))
				return(0);
			cs->irq = dev_sedl->irq;
			if (!cs->irq) {
				printk(KERN_WARNING "Sedlbauer: No IRQ for PCI card found\n");
				return(0);
			}
			cs->hw.sedl.cfg_reg = pci_resource_start(dev_sedl, 0);
		} else {
			printk(KERN_WARNING "Sedlbauer: No PCI card found\n");
			return(0);
		}
		cs->irq_flags |= SA_SHIRQ;
		cs->hw.sedl.bus = SEDL_BUS_PCI;
		sub_vendor_id = dev_sedl->subsystem_vendor;
		sub_id = dev_sedl->subsystem_device;
		printk(KERN_INFO "Sedlbauer: PCI subvendor:%x subid %x\n",
			sub_vendor_id, sub_id);
		printk(KERN_INFO "Sedlbauer: PCI base adr %#x\n",
			cs->hw.sedl.cfg_reg);
		if (sub_id != PCI_SUB_ID_SEDLBAUER) {
			printk(KERN_ERR "Sedlbauer: unknown sub id %#x\n", sub_id);
			return(0);
		}
		if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PYRAMID) {
			cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
			cs->subtyp = SEDL_SPEEDFAX_PYRAMID;
		} else if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PCI) {
			cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
			cs->subtyp = SEDL_SPEEDFAX_PCI;
		} else if (sub_vendor_id == PCI_SUBVENDOR_SEDLBAUER_PCI) {
			cs->hw.sedl.chip = SEDL_CHIP_IPAC;
			cs->subtyp = SEDL_SPEED_PCI;
		} else {
			printk(KERN_ERR "Sedlbauer: unknown sub vendor id %#x\n",
				sub_vendor_id);
			return(0);
		}
		bytecnt = 256;
		cs->hw.sedl.reset_on = SEDL_ISAR_PCI_ISAR_RESET_ON;
		cs->hw.sedl.reset_off = SEDL_ISAR_PCI_ISAR_RESET_OFF;
		byteout(cs->hw.sedl.cfg_reg, 0xff);
		byteout(cs->hw.sedl.cfg_reg, 0x00);
		byteout(cs->hw.sedl.cfg_reg+ 2, 0xdd);
		byteout(cs->hw.sedl.cfg_reg+ 5, 0x02);
		byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_on);
		save_flags(flags);
		sti();
		current->state = TASK_UNINTERRUPTIBLE;
		schedule_timeout((10*HZ)/1000);
		byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
		restore_flags(flags);
#else
		printk(KERN_WARNING "Sedlbauer: NO_PCI_BIOS\n");
		return (0);
#endif /* CONFIG_PCI */
	}	
	
	/* In case of the sedlbauer pcmcia card, this region is in use,
	 * reserved for us by the card manager. So we do not check it
	 * here, it would fail.
	 */
	if (cs->hw.sedl.bus != SEDL_BUS_PCMCIA &&
		check_region((cs->hw.sedl.cfg_reg), bytecnt)) {
		printk(KERN_WARNING
			"HiSax: %s config port %x-%x already in use\n",
			CardType[card->typ],
			cs->hw.sedl.cfg_reg,
			cs->hw.sedl.cfg_reg + bytecnt);
			return (0);
	} else {
		request_region(cs->hw.sedl.cfg_reg, bytecnt, "sedlbauer isdn");
	}

	printk(KERN_INFO
	       "Sedlbauer: defined at 0x%x-0x%x IRQ %d\n",
	       cs->hw.sedl.cfg_reg,
	       cs->hw.sedl.cfg_reg + bytecnt,
	       cs->irq);

	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Sedl_card_msg;

/*
 * testing ISA and PCMCIA Cards for IPAC, default is ISAC
 * do not test for PCI card, because ports are different
 * and PCI card uses only IPAC (for the moment)
 */	
	if (cs->hw.sedl.bus != SEDL_BUS_PCI) {
		val = readreg(cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR,
			cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC, IPAC_ID);
		printk(KERN_DEBUG "Sedlbauer: testing IPAC version %x\n", val);
	        if ((val == 1) || (val == 2)) {
			/* IPAC */
			cs->subtyp = SEDL_SPEED_WIN2_PC104;
			if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
				cs->subtyp = SEDL_SPEED_STAR2;
			}
			cs->hw.sedl.chip = SEDL_CHIP_IPAC;
		} else {
			/* ISAC_HSCX oder ISAC_ISAR */
			if (cs->hw.sedl.chip == SEDL_CHIP_TEST) {
				cs->hw.sedl.chip = SEDL_CHIP_ISAC_HSCX;
			}
		}
	}

/*
 * hw.sedl.chip is now properly set
 */
	printk(KERN_INFO "Sedlbauer: %s detected\n",
		Sedlbauer_Types[cs->subtyp]);


	if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
		if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
	                cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
		} else {
	                cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
		}
		test_and_set_bit(HW_IPAC, &cs->HW_Flags);
		cs->readisac = &ReadISAC_IPAC;
		cs->writeisac = &WriteISAC_IPAC;
		cs->readisacfifo = &ReadISACfifo_IPAC;
		cs->writeisacfifo = &WriteISACfifo_IPAC;
		cs->irq_func = &sedlbauer_interrupt_ipac;

		val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ID);
		printk(KERN_INFO "Sedlbauer: IPAC version %x\n", val);
		reset_sedlbauer(cs);
	} else {
		/* ISAC_HSCX oder ISAC_ISAR */
		cs->readisac = &ReadISAC;
		cs->writeisac = &WriteISAC;
		cs->readisacfifo = &ReadISACfifo;
		cs->writeisacfifo = &WriteISACfifo;
		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
			if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ISAR;
			} else {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR;
				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR_RESET_ON;
				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR_RESET_OFF;
			}
			cs->bcs[0].hw.isar.reg = &cs->hw.sedl.isar;
			cs->bcs[1].hw.isar.reg = &cs->hw.sedl.isar;
			test_and_set_bit(HW_ISAR, &cs->HW_Flags);
			cs->irq_func = &sedlbauer_interrupt_isar;
			cs->auxcmd = &isar_auxcmd;
			ISACVersion(cs, "Sedlbauer:");
			cs->BC_Read_Reg = &ReadISAR;
			cs->BC_Write_Reg = &WriteISAR;
			cs->BC_Send_Data = &isar_fill_fifo;
			ver = ISARVersion(cs, "Sedlbauer:");
			if (ver < 0) {
				printk(KERN_WARNING
					"Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
				release_io_sedlbauer(cs);
				return (0);
			}
		} else {
			if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_HSCX;
				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
			} else {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_HSCX;
				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_ON;
				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_OFF;
			}
			cs->irq_func = &sedlbauer_interrupt;
			ISACVersion(cs, "Sedlbauer:");
		
			if (HscxVersion(cs, "Sedlbauer:")) {
				printk(KERN_WARNING
					"Sedlbauer: wrong HSCX versions check IO address\n");
				release_io_sedlbauer(cs);
				return (0);
			}
			reset_sedlbauer(cs);
		}
	}
	return (1);
}
int __init
setup_bkm_a4t(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];
	u_int pci_memaddr = 0, found = 0;
	I20_REGISTER_FILE *pI20_Regs;
#if CONFIG_PCI
#endif

	strcpy(tmp, bkm_a4t_revision);
	printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ == ISDN_CTYPE_BKM_A4T) {
		cs->subtyp = BKM_A4T;
	} else
		return (0);

#if CONFIG_PCI
	if (!pci_present()) {
		printk(KERN_ERR "bkm_a4t: no PCI bus present\n");
		return (0);
	}
	while ((dev_a4t = pci_find_device(PCI_VENDOR_ID_ZORAN,
		PCI_DEVICE_ID_ZORAN_36120, dev_a4t))) {
		u16 sub_sys;
		u16 sub_vendor;

		sub_vendor = dev_a4t->subsystem_vendor;
		sub_sys = dev_a4t->subsystem_device;
		if ((sub_sys == PCI_DEVICE_ID_BERKOM_A4T) && (sub_vendor == PCI_VENDOR_ID_BERKOM)) {
			if (pci_enable_device(dev_a4t))
				return(0);
			found = 1;
			pci_memaddr = pci_resource_start(dev_a4t, 0);
			cs->irq = dev_a4t->irq;
			break;
		}
	}
	if (!found) {
		printk(KERN_WARNING "HiSax: %s: Card not found\n", CardType[card->typ]);
		return (0);
	}
	if (!cs->irq) {		/* IRQ range check ?? */
		printk(KERN_WARNING "HiSax: %s: No IRQ\n", CardType[card->typ]);
		return (0);
	}
	if (!pci_memaddr) {
		printk(KERN_WARNING "HiSax: %s: No Memory base address\n", CardType[card->typ]);
		return (0);
	}
	cs->hw.ax.base = (long) ioremap(pci_memaddr, 4096);
	/* Check suspecious address */
	pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base);
	if ((pI20_Regs->i20IntStatus & 0x8EFFFFFF) != 0) {
		printk(KERN_WARNING "HiSax: %s address %lx-%lx suspecious\n",
		       CardType[card->typ], cs->hw.ax.base, cs->hw.ax.base + 4096);
		iounmap((void *) cs->hw.ax.base);
		cs->hw.ax.base = 0;
		return (0);
	}
	cs->hw.ax.isac_adr = cs->hw.ax.base + PO_OFFSET;
	cs->hw.ax.jade_adr = cs->hw.ax.base + PO_OFFSET;
	cs->hw.ax.isac_ale = GCS_1;
	cs->hw.ax.jade_ale = GCS_3;
#else
	printk(KERN_WARNING "HiSax: %s: NO_PCI_BIOS\n", CardType[card->typ]);
	printk(KERN_WARNING "HiSax: %s: unable to configure\n", CardType[card->typ]);
	return (0);
#endif				/* CONFIG_PCI */
	printk(KERN_INFO "HiSax: %s: Card configured at 0x%lX IRQ %d\n",
	       CardType[card->typ], cs->hw.ax.base, cs->irq);

	reset_bkm(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadJADE;
	cs->BC_Write_Reg = &WriteJADE;
	cs->BC_Send_Data = &jade_fill_fifo;
	cs->cardmsg = &BKM_card_msg;
	cs->irq_func = &bkm_interrupt;
	cs->irq_flags |= SA_SHIRQ;
	ISACVersion(cs, "Telekom A4T:");
	/* Jade version */
	JadeVersion(cs, "Telekom A4T:");
	return (1);
}
示例#21
0
int __init
setup_teles0(struct IsdnCard *card)
{
	u_char val;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, teles0_revision);
	printk(KERN_INFO "HiSax: Teles 8.0/16.0 driver Rev. %s\n", HiSax_getrev(tmp));
	if ((cs->typ != ISDN_CTYPE_16_0) && (cs->typ != ISDN_CTYPE_8_0))
		return (0);

	if (cs->typ == ISDN_CTYPE_16_0)
		cs->hw.teles0.cfg_reg = card->para[2];
	else			/* 8.0 */
		cs->hw.teles0.cfg_reg = 0;

	if (card->para[1] < 0x10000) {
		card->para[1] <<= 4;
		printk(KERN_INFO
		   "Teles0: membase configured DOSish, assuming 0x%lx\n",
		       (unsigned long) card->para[1]);
	}
	cs->irq = card->para[0];
	if (cs->hw.teles0.cfg_reg) {
		if (!request_region(cs->hw.teles0.cfg_reg, 8, "teles cfg")) {
			printk(KERN_WARNING
			  "HiSax: %s config port %x-%x already in use\n",
			       CardType[card->typ],
			       cs->hw.teles0.cfg_reg,
			       cs->hw.teles0.cfg_reg + 8);
			return (0);
		}
	}
	if (cs->hw.teles0.cfg_reg) {
		if ((val = bytein(cs->hw.teles0.cfg_reg + 0)) != 0x51) {
			printk(KERN_WARNING "Teles0: 16.0 Byte at %x is %x\n",
			       cs->hw.teles0.cfg_reg + 0, val);
			release_region(cs->hw.teles0.cfg_reg, 8);
			return (0);
		}
		if ((val = bytein(cs->hw.teles0.cfg_reg + 1)) != 0x93) {
			printk(KERN_WARNING "Teles0: 16.0 Byte at %x is %x\n",
			       cs->hw.teles0.cfg_reg + 1, val);
			release_region(cs->hw.teles0.cfg_reg, 8);
			return (0);
		}
		val = bytein(cs->hw.teles0.cfg_reg + 2);	/* 0x1e=without AB
								   * 0x1f=with AB
								   * 0x1c 16.3 ???
								 */
		if (val != 0x1e && val != 0x1f) {
			printk(KERN_WARNING "Teles0: 16.0 Byte at %x is %x\n",
			       cs->hw.teles0.cfg_reg + 2, val);
			release_region(cs->hw.teles0.cfg_reg, 8);
			return (0);
		}
	}
	/* 16.0 and 8.0 designed for IOM1 */
	test_and_set_bit(HW_IOM1, &cs->HW_Flags);
	cs->hw.teles0.phymem = card->para[1];
	if (!request_mem_region(cs->hw.teles0.phymem, TELES_IOMEM_SIZE, "teles iomem")) {
		printk(KERN_WARNING
			"HiSax: %s memory region %lx-%lx already in use\n",
			CardType[card->typ],
			cs->hw.teles0.phymem,
			cs->hw.teles0.phymem + TELES_IOMEM_SIZE);
		if (cs->hw.teles0.cfg_reg)
			release_region(cs->hw.teles0.cfg_reg, 8);
		return (0);
	}
	cs->hw.teles0.membase = ioremap(cs->hw.teles0.phymem, TELES_IOMEM_SIZE);
	printk(KERN_INFO
	       "HiSax: %s config irq:%d mem:%p cfg:0x%X\n",
	       CardType[cs->typ], cs->irq,
	       cs->hw.teles0.membase, cs->hw.teles0.cfg_reg);
	if (reset_teles0(cs)) {
		printk(KERN_WARNING "Teles0: wrong IRQ\n");
		release_io_teles0(cs);
		return (0);
	}
	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Teles_card_msg;
	cs->irq_func = &teles0_interrupt;
	ISACVersion(cs, "Teles0:");
	if (HscxVersion(cs, "Teles0:")) {
		printk(KERN_WARNING
		 "Teles0: wrong HSCX versions check IO/MEM addresses\n");
		release_io_teles0(cs);
		return (0);
	}
	return (1);
}
示例#22
0
int __devinit
setup_teles3(struct IsdnCard *card)
{
	u_char val;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, teles3_revision);
	printk(KERN_INFO "HiSax: Teles IO driver Rev. %s\n", HiSax_getrev(tmp));
	if ((cs->typ != ISDN_CTYPE_16_3) && (cs->typ != ISDN_CTYPE_PNP)
	    && (cs->typ != ISDN_CTYPE_TELESPCMCIA) && (cs->typ != ISDN_CTYPE_COMPAQ_ISA))
		return (0);

#ifdef __ISAPNP__
	if (!card->para[1] && isapnp_present()) {
		struct pnp_dev *pnp_d;
		while(ipid->card_vendor) {
			if ((pnp_c = pnp_find_card(ipid->card_vendor,
				ipid->card_device, pnp_c))) {
				pnp_d = NULL;
				if ((pnp_d = pnp_find_dev(pnp_c,
					ipid->vendor, ipid->function, pnp_d))) {
					int err;

					printk(KERN_INFO "HiSax: %s detected\n",
						(char *)ipid->driver_data);
					pnp_disable_dev(pnp_d);
					err = pnp_activate_dev(pnp_d);
					if (err<0) {
						printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
							__FUNCTION__, err);
						return(0);
					}
					card->para[3] = pnp_port_start(pnp_d, 2);
					card->para[2] = pnp_port_start(pnp_d, 1);
					card->para[1] = pnp_port_start(pnp_d, 0);
					card->para[0] = pnp_irq(pnp_d, 0);
					if (!card->para[0] || !card->para[1] || !card->para[2]) {
						printk(KERN_ERR "Teles PnP:some resources are missing %ld/%lx/%lx\n",
							card->para[0], card->para[1], card->para[2]);
						pnp_disable_dev(pnp_d);
						return(0);
					}
					break;
				} else {
					printk(KERN_ERR "Teles PnP: PnP error card found, no device\n");
				}
			}
			ipid++;
			pnp_c = NULL;
		} 
		if (!ipid->card_vendor) {
			printk(KERN_INFO "Teles PnP: no ISAPnP card found\n");
			return(0);
		}
	}
#endif
	if (cs->typ == ISDN_CTYPE_16_3) {
		cs->hw.teles3.cfg_reg = card->para[1];
		switch (cs->hw.teles3.cfg_reg) {
			case 0x180:
			case 0x280:
			case 0x380:
				cs->hw.teles3.cfg_reg |= 0xc00;
				break;
		}
		cs->hw.teles3.isac = cs->hw.teles3.cfg_reg - 0x420;
		cs->hw.teles3.hscx[0] = cs->hw.teles3.cfg_reg - 0xc20;
		cs->hw.teles3.hscx[1] = cs->hw.teles3.cfg_reg - 0x820;
	} else if (cs->typ == ISDN_CTYPE_TELESPCMCIA) {
		cs->hw.teles3.cfg_reg = 0;
		cs->hw.teles3.hscx[0] = card->para[1] - 0x20;
		cs->hw.teles3.hscx[1] = card->para[1];
		cs->hw.teles3.isac = card->para[1] + 0x20;
	} else if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
		cs->hw.teles3.cfg_reg = card->para[3];
		cs->hw.teles3.isac = card->para[2] - 32;
		cs->hw.teles3.hscx[0] = card->para[1] - 32;
		cs->hw.teles3.hscx[1] = card->para[1];
	} else {	/* PNP */
		cs->hw.teles3.cfg_reg = 0;
		cs->hw.teles3.isac = card->para[1] - 32;
		cs->hw.teles3.hscx[0] = card->para[2] - 32;
		cs->hw.teles3.hscx[1] = card->para[2];
	}
	cs->irq = card->para[0];
	cs->hw.teles3.isacfifo = cs->hw.teles3.isac + 0x3e;
	cs->hw.teles3.hscxfifo[0] = cs->hw.teles3.hscx[0] + 0x3e;
	cs->hw.teles3.hscxfifo[1] = cs->hw.teles3.hscx[1] + 0x3e;
	if (cs->typ == ISDN_CTYPE_TELESPCMCIA) {
		if (!request_region(cs->hw.teles3.hscx[1], 96, "HiSax Teles PCMCIA")) {
			printk(KERN_WARNING
			       "HiSax: %s ports %x-%x already in use\n",
			       CardType[cs->typ],
			       cs->hw.teles3.hscx[1],
			       cs->hw.teles3.hscx[1] + 96);
			return (0);
		}
	} else {
		if (cs->hw.teles3.cfg_reg) {
			if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
				if (!request_region(cs->hw.teles3.cfg_reg, 1, "teles3 cfg")) {
					printk(KERN_WARNING
						"HiSax: %s config port %x already in use\n",
						CardType[card->typ],
						cs->hw.teles3.cfg_reg);
					return (0);
				}
			} else {
				if (!request_region(cs->hw.teles3.cfg_reg, 8, "teles3 cfg")) {
					printk(KERN_WARNING
					       "HiSax: %s config port %x-%x already in use\n",
					       CardType[card->typ],
					       cs->hw.teles3.cfg_reg,
						cs->hw.teles3.cfg_reg + 8);
					return (0);
				}
			}
		}
		if (!request_region(cs->hw.teles3.isac + 32, 32, "HiSax isac")) {
			printk(KERN_WARNING
			   "HiSax: %s isac ports %x-%x already in use\n",
			       CardType[cs->typ],
			       cs->hw.teles3.isac + 32,
			       cs->hw.teles3.isac + 64);
			if (cs->hw.teles3.cfg_reg) {
				if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
					release_region(cs->hw.teles3.cfg_reg, 1);
				} else {
					release_region(cs->hw.teles3.cfg_reg, 8);
				}
			}
			return (0);
		}
		if (!request_region(cs->hw.teles3.hscx[0] + 32, 32, "HiSax hscx A")) {
			printk(KERN_WARNING
			 "HiSax: %s hscx A ports %x-%x already in use\n",
			       CardType[cs->typ],
			       cs->hw.teles3.hscx[0] + 32,
			       cs->hw.teles3.hscx[0] + 64);
			if (cs->hw.teles3.cfg_reg) {
				if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
					release_region(cs->hw.teles3.cfg_reg, 1);
				} else {
					release_region(cs->hw.teles3.cfg_reg, 8);
				}
			}
			release_ioregs(cs, 1);
			return (0);
		}
		if (!request_region(cs->hw.teles3.hscx[1] + 32, 32, "HiSax hscx B")) {
			printk(KERN_WARNING
			 "HiSax: %s hscx B ports %x-%x already in use\n",
			       CardType[cs->typ],
			       cs->hw.teles3.hscx[1] + 32,
			       cs->hw.teles3.hscx[1] + 64);
			if (cs->hw.teles3.cfg_reg) {
				if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
					release_region(cs->hw.teles3.cfg_reg, 1);
				} else {
					release_region(cs->hw.teles3.cfg_reg, 8);
				}
			}
			release_ioregs(cs, 3);
			return (0);
		}
	}
	if ((cs->hw.teles3.cfg_reg) && (cs->typ != ISDN_CTYPE_COMPAQ_ISA)) {
		if ((val = bytein(cs->hw.teles3.cfg_reg + 0)) != 0x51) {
			printk(KERN_WARNING "Teles: 16.3 Byte at %x is %x\n",
			       cs->hw.teles3.cfg_reg + 0, val);
			release_io_teles3(cs);
			return (0);
		}
		if ((val = bytein(cs->hw.teles3.cfg_reg + 1)) != 0x93) {
			printk(KERN_WARNING "Teles: 16.3 Byte at %x is %x\n",
			       cs->hw.teles3.cfg_reg + 1, val);
			release_io_teles3(cs);
			return (0);
		}
		val = bytein(cs->hw.teles3.cfg_reg + 2);/* 0x1e=without AB
							 * 0x1f=with AB
							 * 0x1c 16.3 ???
							 * 0x39 16.3 1.1
							 * 0x38 16.3 1.3
							 * 0x46 16.3 with AB + Video (Teles-Vision)
							 */
		if (val != 0x46 && val != 0x39 && val != 0x38 && val != 0x1c && val != 0x1e && val != 0x1f) {
			printk(KERN_WARNING "Teles: 16.3 Byte at %x is %x\n",
			       cs->hw.teles3.cfg_reg + 2, val);
			release_io_teles3(cs);
			return (0);
		}
	}
	printk(KERN_INFO
	       "HiSax: %s config irq:%d isac:0x%X  cfg:0x%X\n",
	       CardType[cs->typ], cs->irq,
	       cs->hw.teles3.isac + 32, cs->hw.teles3.cfg_reg);
	printk(KERN_INFO
	       "HiSax: hscx A:0x%X  hscx B:0x%X\n",
	       cs->hw.teles3.hscx[0] + 32, cs->hw.teles3.hscx[1] + 32);

	setup_isac(cs);
	if (reset_teles3(cs)) {
		printk(KERN_WARNING "Teles3: wrong IRQ\n");
		release_io_teles3(cs);
		return (0);
	}
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Teles_card_msg;
	cs->irq_func = &teles3_interrupt;
	ISACVersion(cs, "Teles3:");
	if (HscxVersion(cs, "Teles3:")) {
		printk(KERN_WARNING
		       "Teles3: wrong HSCX versions check IO address\n");
		release_io_teles3(cs);
		return (0);
	}
	return (1);
}
示例#23
0
文件: teleint.c 项目: 274914765/C
int __devinit
setup_TeleInt(struct IsdnCard *card)
{
    struct IsdnCardState *cs = card->cs;
    char tmp[64];

    strcpy(tmp, TeleInt_revision);
    printk(KERN_INFO "HiSax: TeleInt driver Rev. %s\n", HiSax_getrev(tmp));
    if (cs->typ != ISDN_CTYPE_TELEINT)
        return (0);

    cs->hw.hfc.addr = card->para[1] & 0x3fe;
    cs->irq = card->para[0];
    cs->hw.hfc.cirm = HFC_CIRM;
    cs->hw.hfc.isac_spcr = 0x00;
    cs->hw.hfc.cip = 0;
    cs->hw.hfc.ctmt = HFC_CTMT | HFC_CLTIMER;
    cs->bcs[0].hw.hfc.send = NULL;
    cs->bcs[1].hw.hfc.send = NULL;
    cs->hw.hfc.fifosize = 7 * 1024 + 512;
    cs->hw.hfc.timer.function = (void *) TeleInt_Timer;
    cs->hw.hfc.timer.data = (long) cs;
    init_timer(&cs->hw.hfc.timer);
    if (!request_region(cs->hw.hfc.addr, 2, "TeleInt isdn")) {
        printk(KERN_WARNING
               "HiSax: TeleInt config port %x-%x already in use\n",
               cs->hw.hfc.addr,
               cs->hw.hfc.addr + 2);
        return (0);
    }
    /* HW IO = IO */
    byteout(cs->hw.hfc.addr, cs->hw.hfc.addr & 0xff);
    byteout(cs->hw.hfc.addr | 1, ((cs->hw.hfc.addr & 0x300) >> 8) | 0x54);
    switch (cs->irq) {
        case 3:
            cs->hw.hfc.cirm |= HFC_INTA;
            break;
        case 4:
            cs->hw.hfc.cirm |= HFC_INTB;
            break;
        case 5:
            cs->hw.hfc.cirm |= HFC_INTC;
            break;
        case 7:
            cs->hw.hfc.cirm |= HFC_INTD;
            break;
        case 10:
            cs->hw.hfc.cirm |= HFC_INTE;
            break;
        case 11:
            cs->hw.hfc.cirm |= HFC_INTF;
            break;
        default:
            printk(KERN_WARNING "TeleInt: wrong IRQ\n");
            release_io_TeleInt(cs);
            return (0);
    }
    byteout(cs->hw.hfc.addr | 1, cs->hw.hfc.cirm);
    byteout(cs->hw.hfc.addr | 1, cs->hw.hfc.ctmt);

    printk(KERN_INFO "TeleInt: defined at 0x%x IRQ %d\n",
        cs->hw.hfc.addr, cs->irq);

    setup_isac(cs);
    cs->readisac = &ReadISAC;
    cs->writeisac = &WriteISAC;
    cs->readisacfifo = &ReadISACfifo;
    cs->writeisacfifo = &WriteISACfifo;
    cs->BC_Read_Reg = &ReadHFC;
    cs->BC_Write_Reg = &WriteHFC;
    cs->cardmsg = &TeleInt_card_msg;
    cs->irq_func = &TeleInt_interrupt;
    ISACVersion(cs, "TeleInt:");
    return (1);
}
int __init
setup_diva(struct IsdnCard *card)
{
	int bytecnt = 8;
	u_char val;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, Diva_revision);
	printk(KERN_INFO "HiSax: Eicon.Diehl Diva driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_DIEHLDIVA)
		return(0);
	cs->hw.diva.status = 0;
	if (card->para[1]) {
		cs->hw.diva.ctrl_reg = 0;
		cs->hw.diva.cfg_reg = card->para[1];
		val = readreg(cs->hw.diva.cfg_reg + DIVA_IPAC_ADR,
			cs->hw.diva.cfg_reg + DIVA_IPAC_DATA, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
		if ((val == 1) || (val==2)) {
			cs->subtyp = DIVA_IPAC_ISA;
			cs->hw.diva.ctrl = 0;
			cs->hw.diva.isac = card->para[1] + DIVA_IPAC_DATA;
			cs->hw.diva.hscx = card->para[1] + DIVA_IPAC_DATA;
			cs->hw.diva.isac_adr = card->para[1] + DIVA_IPAC_ADR;
			cs->hw.diva.hscx_adr = card->para[1] + DIVA_IPAC_ADR;
			test_and_set_bit(HW_IPAC, &cs->HW_Flags);
		} else {
			cs->subtyp = DIVA_ISA;
			cs->hw.diva.ctrl = card->para[1] + DIVA_ISA_CTRL;
			cs->hw.diva.isac = card->para[1] + DIVA_ISA_ISAC_DATA;
			cs->hw.diva.hscx = card->para[1] + DIVA_HSCX_DATA;
			cs->hw.diva.isac_adr = card->para[1] + DIVA_ISA_ISAC_ADR;
			cs->hw.diva.hscx_adr = card->para[1] + DIVA_HSCX_ADR;
		}
		cs->irq = card->para[0];
	} else {
#ifdef __ISAPNP__
		if (isapnp_present()) {
			struct pnp_dev *pnp_d;
			while(ipid->card_vendor) {
				if ((pnp_c = pnp_find_card(ipid->card_vendor,
					ipid->card_device, pnp_c))) {
					pnp_d = NULL;
					if ((pnp_d = pnp_find_dev(pnp_c,
						ipid->vendor, ipid->function, pnp_d))) {
						int err;

						printk(KERN_INFO "HiSax: %s detected\n",
							(char *)ipid->driver_data);
						pnp_disable_dev(pnp_d);
						err = pnp_activate_dev(pnp_d);
						if (err<0) {
							printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
								__FUNCTION__, err);
							return(0);
						}
						card->para[1] = pnp_port_start(pnp_d, 0);
						card->para[0] = pnp_irq(pnp_d, 0);
						if (!card->para[0] || !card->para[1]) {
							printk(KERN_ERR "Diva PnP:some resources are missing %ld/%lx\n",
								card->para[0], card->para[1]);
							pnp_disable_dev(pnp_d); 
							return(0);
						}
						cs->hw.diva.cfg_reg  = card->para[1];
						cs->irq = card->para[0];
						if (ipid->function == ISAPNP_FUNCTION(0xA1)) {
							cs->subtyp = DIVA_IPAC_ISA;
							cs->hw.diva.ctrl = 0;
							cs->hw.diva.isac =
								card->para[1] + DIVA_IPAC_DATA;
							cs->hw.diva.hscx =
								card->para[1] + DIVA_IPAC_DATA;
							cs->hw.diva.isac_adr =
								card->para[1] + DIVA_IPAC_ADR;
							cs->hw.diva.hscx_adr =
								card->para[1] + DIVA_IPAC_ADR;
							test_and_set_bit(HW_IPAC, &cs->HW_Flags);
						} else {
							cs->subtyp = DIVA_ISA;
							cs->hw.diva.ctrl =
								card->para[1] + DIVA_ISA_CTRL;
							cs->hw.diva.isac =
								card->para[1] + DIVA_ISA_ISAC_DATA;
							cs->hw.diva.hscx =
								card->para[1] + DIVA_HSCX_DATA;
							cs->hw.diva.isac_adr =
								card->para[1] + DIVA_ISA_ISAC_ADR;
							cs->hw.diva.hscx_adr =
								card->para[1] + DIVA_HSCX_ADR;
						}
						goto ready;
					} else {
						printk(KERN_ERR "Diva PnP: PnP error card found, no device\n");
						return(0);
					}
				}
				ipid++;
				pnp_c=NULL;
			} 
			if (!ipid->card_vendor) {
				printk(KERN_INFO "Diva PnP: no ISAPnP card found\n");
			}
		}
#endif
#ifdef CONFIG_PCI
		cs->subtyp = 0;
		if ((dev_diva = pci_find_device(PCI_VENDOR_ID_EICON,
			PCI_DEVICE_ID_EICON_DIVA20, dev_diva))) {
			if (pci_enable_device(dev_diva))
				return(0);
			cs->subtyp = DIVA_PCI;
			cs->irq = dev_diva->irq;
			cs->hw.diva.cfg_reg = pci_resource_start(dev_diva, 2);
		} else if ((dev_diva_u = pci_find_device(PCI_VENDOR_ID_EICON,
			PCI_DEVICE_ID_EICON_DIVA20_U, dev_diva_u))) {
			if (pci_enable_device(dev_diva_u))
				return(0);
			cs->subtyp = DIVA_PCI;
			cs->irq = dev_diva_u->irq;
			cs->hw.diva.cfg_reg = pci_resource_start(dev_diva_u, 2);
		} else if ((dev_diva201 = pci_find_device(PCI_VENDOR_ID_EICON,
			PCI_DEVICE_ID_EICON_DIVA201, dev_diva201))) {
			if (pci_enable_device(dev_diva201))
				return(0);
			cs->subtyp = DIVA_IPAC_PCI;
			cs->irq = dev_diva201->irq;
			cs->hw.diva.pci_cfg =
				(ulong) ioremap(pci_resource_start(dev_diva201, 0), 4096);
			cs->hw.diva.cfg_reg =
				(ulong) ioremap(pci_resource_start(dev_diva201, 1), 4096);
		} else if ((dev_diva202 = pci_find_device(PCI_VENDOR_ID_EICON,
			PCI_DEVICE_ID_EICON_DIVA202, dev_diva202))) {
			if (pci_enable_device(dev_diva202))
				return(0);
			cs->subtyp = DIVA_IPACX_PCI;
			cs->irq = dev_diva202->irq;
			cs->hw.diva.pci_cfg =
				(ulong) ioremap(pci_resource_start(dev_diva202, 0), 4096);
			cs->hw.diva.cfg_reg =
				(ulong) ioremap(pci_resource_start(dev_diva202, 1), 4096);
		} else {
			printk(KERN_WARNING "Diva: No PCI card found\n");
			return(0);
		}

		if (!cs->irq) {
			printk(KERN_WARNING "Diva: No IRQ for PCI card found\n");
			return(0);
		}

		if (!cs->hw.diva.cfg_reg) {
			printk(KERN_WARNING "Diva: No IO-Adr for PCI card found\n");
			return(0);
		}
		cs->irq_flags |= SA_SHIRQ;
#else
		printk(KERN_WARNING "Diva: cfgreg 0 and NO_PCI_BIOS\n");
		printk(KERN_WARNING "Diva: unable to config DIVA PCI\n");
		return (0);
#endif /* CONFIG_PCI */
		if ((cs->subtyp == DIVA_IPAC_PCI) ||
		    (cs->subtyp == DIVA_IPACX_PCI)   ) {
			cs->hw.diva.ctrl = 0;
			cs->hw.diva.isac = 0;
			cs->hw.diva.hscx = 0;
			cs->hw.diva.isac_adr = 0;
			cs->hw.diva.hscx_adr = 0;
			test_and_set_bit(HW_IPAC, &cs->HW_Flags);
			bytecnt = 0;
		} else {
			cs->hw.diva.ctrl = cs->hw.diva.cfg_reg + DIVA_PCI_CTRL;
			cs->hw.diva.isac = cs->hw.diva.cfg_reg + DIVA_PCI_ISAC_DATA;
			cs->hw.diva.hscx = cs->hw.diva.cfg_reg + DIVA_HSCX_DATA;
			cs->hw.diva.isac_adr = cs->hw.diva.cfg_reg + DIVA_PCI_ISAC_ADR;
			cs->hw.diva.hscx_adr = cs->hw.diva.cfg_reg + DIVA_HSCX_ADR;
			bytecnt = 32;
		}
	}
ready:
	printk(KERN_INFO
		"Diva: %s card configured at %#lx IRQ %d\n",
		(cs->subtyp == DIVA_PCI) ? "PCI" :
		(cs->subtyp == DIVA_ISA) ? "ISA" : 
		(cs->subtyp == DIVA_IPAC_ISA) ? "IPAC ISA" :
		(cs->subtyp == DIVA_IPAC_PCI) ? "IPAC PCI" : "IPACX PCI",
		cs->hw.diva.cfg_reg, cs->irq);
	if ((cs->subtyp == DIVA_IPAC_PCI)  || 
	    (cs->subtyp == DIVA_IPACX_PCI) || 
	    (cs->subtyp == DIVA_PCI)         )
		printk(KERN_INFO "Diva: %s space at %#lx\n",
			(cs->subtyp == DIVA_PCI) ? "PCI" :
			(cs->subtyp == DIVA_IPAC_PCI) ? "IPAC PCI" : "IPACX PCI",
			cs->hw.diva.pci_cfg);
	if ((cs->subtyp != DIVA_IPAC_PCI) &&
	    (cs->subtyp != DIVA_IPACX_PCI)   ) {
		if (!request_region(cs->hw.diva.cfg_reg, bytecnt, "diva isdn")) {
			printk(KERN_WARNING
			       "HiSax: %s config port %lx-%lx already in use\n",
			       CardType[card->typ],
			       cs->hw.diva.cfg_reg,
			       cs->hw.diva.cfg_reg + bytecnt);
			return (0);
		}
	}
	cs->BC_Read_Reg  = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Diva_card_msg;
	setup_isac(cs);
	if (cs->subtyp == DIVA_IPAC_ISA) {
		cs->readisac  = &ReadISAC_IPAC;
		cs->writeisac = &WriteISAC_IPAC;
		cs->readisacfifo  = &ReadISACfifo_IPAC;
		cs->writeisacfifo = &WriteISACfifo_IPAC;
		cs->irq_func = &diva_irq_ipac_isa;
		val = readreg(cs->hw.diva.isac_adr, cs->hw.diva.isac, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else if (cs->subtyp == DIVA_IPAC_PCI) {
		cs->readisac  = &MemReadISAC_IPAC;
		cs->writeisac = &MemWriteISAC_IPAC;
		cs->readisacfifo  = &MemReadISACfifo_IPAC;
		cs->writeisacfifo = &MemWriteISACfifo_IPAC;
		cs->BC_Read_Reg  = &MemReadHSCX;
		cs->BC_Write_Reg = &MemWriteHSCX;
		cs->BC_Send_Data = &Memhscx_fill_fifo;
		cs->irq_func = &diva_irq_ipac_pci;
		val = memreadreg(cs->hw.diva.cfg_reg, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else if (cs->subtyp == DIVA_IPACX_PCI) {
		cs->readisac  = &MemReadISAC_IPACX;
		cs->writeisac = &MemWriteISAC_IPACX;
		cs->readisacfifo  = &MemReadISACfifo_IPACX;
		cs->writeisacfifo = &MemWriteISACfifo_IPACX;
		cs->BC_Read_Reg  = &MemReadHSCX_IPACX;
		cs->BC_Write_Reg = &MemWriteHSCX_IPACX;
		cs->BC_Send_Data = NULL; // function located in ipacx module
		cs->irq_func = &diva_irq_ipacx_pci;
		printk(KERN_INFO "Diva: IPACX Design Id: %x\n", 
			MemReadISAC_IPACX(cs, IPACX_ID) &0x3F);
	} else { /* DIVA 2.0 */
		cs->hw.diva.tl.function = (void *) diva_led_handler;
		cs->hw.diva.tl.data = (long) cs;
		init_timer(&cs->hw.diva.tl);
		cs->readisac  = &ReadISAC;
		cs->writeisac = &WriteISAC;
		cs->readisacfifo  = &ReadISACfifo;
		cs->writeisacfifo = &WriteISACfifo;
		cs->irq_func = &diva_interrupt;
		ISACVersion(cs, "Diva:");
		if (HscxVersion(cs, "Diva:")) {
			printk(KERN_WARNING
		       "Diva: wrong HSCX versions check IO address\n");
			release_io_diva(cs);
			return (0);
		}
	}
	return (1);
}
示例#25
0
int __init
setup_avm_a1(struct IsdnCard *card)
{
	u_char val;
	struct IsdnCardState *cs = card->cs;
	long flags;
	char tmp[64];

	strcpy(tmp, avm_revision);
	printk(KERN_INFO "HiSax: AVM driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_A1)
		return (0);

	cs->hw.avm.cfg_reg = card->para[1] + 0x1800;
	cs->hw.avm.isac = card->para[1] + 0x1400 - 0x20;
	cs->hw.avm.hscx[0] = card->para[1] + 0x400 - 0x20;
	cs->hw.avm.hscx[1] = card->para[1] + 0xc00 - 0x20;
	cs->hw.avm.isacfifo = card->para[1] + 0x1000;
	cs->hw.avm.hscxfifo[0] = card->para[1];
	cs->hw.avm.hscxfifo[1] = card->para[1] + 0x800;
	cs->irq = card->para[0];
	if (check_region((cs->hw.avm.cfg_reg), 8)) {
		printk(KERN_WARNING
		       "HiSax: %s config port %x-%x already in use\n",
		       CardType[card->typ],
		       cs->hw.avm.cfg_reg,
		       cs->hw.avm.cfg_reg + 8);
		return (0);
	} else {
		request_region(cs->hw.avm.cfg_reg, 8, "avm cfg");
	}
	if (check_region((cs->hw.avm.isac + 32), 32)) {
		printk(KERN_WARNING
		       "HiSax: %s isac ports %x-%x already in use\n",
		       CardType[cs->typ],
		       cs->hw.avm.isac + 32,
		       cs->hw.avm.isac + 64);
		release_ioregs(cs, 0);
		return (0);
	} else {
		request_region(cs->hw.avm.isac + 32, 32, "HiSax isac");
	}
	if (check_region((cs->hw.avm.isacfifo), 1)) {
		printk(KERN_WARNING
		       "HiSax: %s isac fifo port %x already in use\n",
		       CardType[cs->typ],
		       cs->hw.avm.isacfifo);
		release_ioregs(cs, 1);
		return (0);
	} else {
		request_region(cs->hw.avm.isacfifo, 1, "HiSax isac fifo");
	}
	if (check_region((cs->hw.avm.hscx[0]) + 32, 32)) {
		printk(KERN_WARNING
		       "HiSax: %s hscx A ports %x-%x already in use\n",
		       CardType[cs->typ],
		       cs->hw.avm.hscx[0] + 32,
		       cs->hw.avm.hscx[0] + 64);
		release_ioregs(cs, 3);
		return (0);
	} else {
		request_region(cs->hw.avm.hscx[0] + 32, 32, "HiSax hscx A");
	}
	if (check_region(cs->hw.avm.hscxfifo[0], 1)) {
		printk(KERN_WARNING
		       "HiSax: %s hscx A fifo port %x already in use\n",
		       CardType[cs->typ],
		       cs->hw.avm.hscxfifo[0]);
		release_ioregs(cs, 7);
		return (0);
	} else {
		request_region(cs->hw.avm.hscxfifo[0], 1, "HiSax hscx A fifo");
	}
	if (check_region(cs->hw.avm.hscx[1] + 32, 32)) {
		printk(KERN_WARNING
		       "HiSax: %s hscx B ports %x-%x already in use\n",
		       CardType[cs->typ],
		       cs->hw.avm.hscx[1] + 32,
		       cs->hw.avm.hscx[1] + 64);
		release_ioregs(cs, 0xf);
		return (0);
	} else {
		request_region(cs->hw.avm.hscx[1] + 32, 32, "HiSax hscx B");
	}
	if (check_region(cs->hw.avm.hscxfifo[1], 1)) {
		printk(KERN_WARNING
		       "HiSax: %s hscx B fifo port %x already in use\n",
		       CardType[cs->typ],
		       cs->hw.avm.hscxfifo[1]);
		release_ioregs(cs, 0x1f);
		return (0);
	} else {
		request_region(cs->hw.avm.hscxfifo[1], 1, "HiSax hscx B fifo");
	}
	save_flags(flags);
	byteout(cs->hw.avm.cfg_reg, 0x0);
	sti();
	HZDELAY(HZ / 5 + 1);
	byteout(cs->hw.avm.cfg_reg, 0x1);
	HZDELAY(HZ / 5 + 1);
	byteout(cs->hw.avm.cfg_reg, 0x0);
	HZDELAY(HZ / 5 + 1);
	val = cs->irq;
	if (val == 9)
		val = 2;
	byteout(cs->hw.avm.cfg_reg + 1, val);
	HZDELAY(HZ / 5 + 1);
	byteout(cs->hw.avm.cfg_reg, 0x0);
	HZDELAY(HZ / 5 + 1);
	restore_flags(flags);

	val = bytein(cs->hw.avm.cfg_reg);
	printk(KERN_INFO "AVM A1: Byte at %x is %x\n",
	       cs->hw.avm.cfg_reg, val);
	val = bytein(cs->hw.avm.cfg_reg + 3);
	printk(KERN_INFO "AVM A1: Byte at %x is %x\n",
	       cs->hw.avm.cfg_reg + 3, val);
	val = bytein(cs->hw.avm.cfg_reg + 2);
	printk(KERN_INFO "AVM A1: Byte at %x is %x\n",
	       cs->hw.avm.cfg_reg + 2, val);
	val = bytein(cs->hw.avm.cfg_reg);
	printk(KERN_INFO "AVM A1: Byte at %x is %x\n",
	       cs->hw.avm.cfg_reg, val);

	printk(KERN_INFO
	       "HiSax: %s config irq:%d cfg:0x%X\n",
	       CardType[cs->typ], cs->irq,
	       cs->hw.avm.cfg_reg);
	printk(KERN_INFO
	       "HiSax: isac:0x%X/0x%X\n",
	       cs->hw.avm.isac + 32, cs->hw.avm.isacfifo);
	printk(KERN_INFO
	       "HiSax: hscx A:0x%X/0x%X  hscx B:0x%X/0x%X\n",
	       cs->hw.avm.hscx[0] + 32, cs->hw.avm.hscxfifo[0],
	       cs->hw.avm.hscx[1] + 32, cs->hw.avm.hscxfifo[1]);

	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &AVM_card_msg;
	cs->irq_func = &avm_a1_interrupt;
	ISACVersion(cs, "AVM A1:");
	if (HscxVersion(cs, "AVM A1:")) {
		printk(KERN_WARNING
		       "AVM A1: wrong HSCX versions check IO address\n");
		release_ioregs(cs, 0x3f);
		return (0);
	}
	return (1);
}
示例#26
0
int __init
setup_netjet_s(struct IsdnCard *card)
{
	int bytecnt,cfg;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif
	strcpy(tmp, NETjet_S_revision);
	printk(KERN_INFO "HiSax: Traverse Tech. NETjet-S driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_NETJET_S)
		return(0);
	test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);

#ifdef CONFIG_PCI

	for ( ;; )
	{
		if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
			PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
			if (pci_enable_device(dev_netjet))
				return(0);
			pci_set_master(dev_netjet);
			cs->irq = dev_netjet->irq;
			if (!cs->irq) {
				printk(KERN_WARNING "NETjet-S: No IRQ for PCI card found\n");
				return(0);
			}
			cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
			if (!cs->hw.njet.base) {
				printk(KERN_WARNING "NETjet-S: No IO-Adr for PCI card found\n");
				return(0);
			}
			/* the TJ300 and TJ320 must be detected, the IRQ handling is different
			 * unfortunatly the chips use the same device ID, but the TJ320 has
			 * the bit20 in status PCI cfg register set
			 */
			pci_read_config_dword(dev_netjet, 0x04, &cfg);
			if (cfg & 0x00100000)
				cs->subtyp = 1; /* TJ320 */
			else
				cs->subtyp = 0; /* TJ300 */
			/* 2001/10/04 Christoph Ersfeld, Formula-n Europe AG www.formula-n.com */
			if ((dev_netjet->subsystem_vendor == 0x55) &&
				(dev_netjet->subsystem_device == 0x02)) {
				printk(KERN_WARNING "Netjet: You tried to load this driver with an incompatible TigerJet-card\n");
				printk(KERN_WARNING "Use type=41 for Formula-n enter:now ISDN PCI and compatible\n");
				return(0);
			}
			/* end new code */
		} else {
			printk(KERN_WARNING "NETjet-S: No PCI card found\n");
			return(0);
		}

		cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA;
		cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF;

		cs->hw.njet.ctrl_reg = 0xff;  /* Reset On */
		byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
		mdelay(10);

		cs->hw.njet.ctrl_reg = 0x00;  /* Reset Off and status read clear */
		byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
		mdelay(10);

		cs->hw.njet.auxd = 0xC0;
		cs->hw.njet.dmactrl = 0;

		byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ);
		byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ);
		byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);

		switch ( ( ( NETjet_ReadIC( cs, ISAC_RBCH ) >> 5 ) & 3 ) )
		{
			case 0 :
				break;

			case 3 :
				printk( KERN_WARNING "NETjet-S: NETspider-U PCI card found\n" );
				continue;

			default :
				printk( KERN_WARNING "NETjet-S: No PCI card found\n" );
				return 0;
                }
                break;
	}
#else

	printk(KERN_WARNING "NETjet-S: NO_PCI_BIOS\n");
	printk(KERN_WARNING "NETjet-S: unable to config NETJET-S PCI\n");
	return (0);

#endif /* CONFIG_PCI */

	bytecnt = 256;

	printk(KERN_INFO
		"NETjet-S: %s card configured at %#lx IRQ %d\n",
		cs->subtyp ? "TJ320" : "TJ300", cs->hw.njet.base, cs->irq);
	if (!request_region(cs->hw.njet.base, bytecnt, "netjet-s isdn")) {
		printk(KERN_WARNING
		       "HiSax: %s config port %#lx-%#lx already in use\n",
		       CardType[card->typ],
		       cs->hw.njet.base,
		       cs->hw.njet.base + bytecnt);
		return (0);
	}
	cs->readisac  = &NETjet_ReadIC;
	cs->writeisac = &NETjet_WriteIC;
	cs->readisacfifo  = &NETjet_ReadICfifo;
	cs->writeisacfifo = &NETjet_WriteICfifo;
	cs->BC_Read_Reg  = &dummyrr;
	cs->BC_Write_Reg = &dummywr;
	cs->BC_Send_Data = &netjet_fill_dma;
	setup_isac(cs);
	cs->cardmsg = &NETjet_S_card_msg;
	cs->irq_func = &netjet_s_interrupt;
	cs->irq_flags |= SA_SHIRQ;
	ISACVersion(cs, "NETjet-S:");
	return (1);
}
示例#27
0
int __devinit
setup_ix1micro(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, ix1_revision);
	printk(KERN_INFO "HiSax: ITK IX1 driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_IX1MICROR2)
		return (0);

#ifdef __ISAPNP__
	if (!card->para[1] && isapnp_present()) {
		struct pnp_dev *pnp_d;
		while(ipid->card_vendor) {
			if ((pnp_c = pnp_find_card(ipid->card_vendor,
				ipid->card_device, pnp_c))) {
				pnp_d = NULL;
				if ((pnp_d = pnp_find_dev(pnp_c,
					ipid->vendor, ipid->function, pnp_d))) {
					int err;

					printk(KERN_INFO "HiSax: %s detected\n",
						(char *)ipid->driver_data);
					pnp_disable_dev(pnp_d);
					err = pnp_activate_dev(pnp_d);
					if (err<0) {
						printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
							__FUNCTION__, err);
						return(0);
					}
					card->para[1] = pnp_port_start(pnp_d, 0);
					card->para[0] = pnp_irq(pnp_d, 0);
					if (!card->para[0] || !card->para[1]) {
						printk(KERN_ERR "ITK PnP:some resources are missing %ld/%lx\n",
							card->para[0], card->para[1]);
						pnp_disable_dev(pnp_d);
						return(0);
					}
					break;
				} else {
					printk(KERN_ERR "ITK PnP: PnP error card found, no device\n");
				}
			}
			ipid++;
			pnp_c = NULL;
		} 
		if (!ipid->card_vendor) {
			printk(KERN_INFO "ITK PnP: no ISAPnP card found\n");
			return(0);
		}
	}
#endif
	/* IO-Ports */
	cs->hw.ix1.isac_ale = card->para[1] + ISAC_COMMAND_OFFSET;
	cs->hw.ix1.hscx_ale = card->para[1] + HSCX_COMMAND_OFFSET;
	cs->hw.ix1.isac = card->para[1] + ISAC_DATA_OFFSET;
	cs->hw.ix1.hscx = card->para[1] + HSCX_DATA_OFFSET;
	cs->hw.ix1.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	if (cs->hw.ix1.cfg_reg) {
		if (!request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg")) {
			printk(KERN_WARNING
			  "HiSax: %s config port %x-%x already in use\n",
			       CardType[card->typ],
			       cs->hw.ix1.cfg_reg,
			       cs->hw.ix1.cfg_reg + 4);
			return (0);
		}
	}
	printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n",
		CardType[cs->typ], cs->irq, cs->hw.ix1.cfg_reg);
	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &ix1_card_msg;
	cs->irq_func = &ix1micro_interrupt;
	ISACVersion(cs, "ix1-Micro:");
	if (HscxVersion(cs, "ix1-Micro:")) {
		printk(KERN_WARNING
		    "ix1-Micro: wrong HSCX versions check IO address\n");
		release_io_ix1micro(cs);
		return (0);
	}
	return (1);
}
示例#28
0
int __devinit
setup_gazel(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];
	u_char val;

	strcpy(tmp, gazel_revision);
	printk(KERN_INFO "Gazel: Driver Revision %s\n", HiSax_getrev(tmp));

	if (cs->typ != ISDN_CTYPE_GAZEL)
		return (0);

	if (card->para[0]) {
		if (setup_gazelisa(card, cs))
			return (0);
	} else {

#ifdef CONFIG_PCI_LEGACY
		if (setup_gazelpci(cs))
			return (0);
#else
		printk(KERN_WARNING "Gazel: Card PCI requested and NO_PCI_BIOS, unable to config\n");
		return (0);
#endif				/* CONFIG_PCI */
	}

	if (reserve_regions(card, cs)) {
		return (0);
	}
	if (reset_gazel(cs)) {
		printk(KERN_WARNING "Gazel: wrong IRQ\n");
		release_io_gazel(cs);
		return (0);
	}
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Gazel_card_msg;

	switch (cs->subtyp) {
		case R647:
		case R685:
			cs->irq_func = &gazel_interrupt;
			ISACVersion(cs, "Gazel:");
			if (HscxVersion(cs, "Gazel:")) {
				printk(KERN_WARNING
				       "Gazel: wrong HSCX versions check IO address\n");
				release_io_gazel(cs);
				return (0);
			}
			break;
		case R742:
		case R753:
			cs->irq_func = &gazel_interrupt_ipac;
			val = ReadISAC(cs, IPAC_ID - 0x80);
			printk(KERN_INFO "Gazel: IPAC version %x\n", val);
			break;
	}

	return (1);
}
示例#29
0
int __init
setup_telespci(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif
	strcpy(tmp, telespci_revision);
	printk(KERN_INFO "HiSax: Teles/PCI driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_TELESPCI)
		return (0);
#if CONFIG_PCI
	if (!pci_present()) {
		printk(KERN_ERR "TelesPCI: no PCI bus present\n");
		return(0);
	}
	if ((dev_tel = pci_find_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) {
		if (pci_enable_device(dev_tel))
			return(0);
		cs->irq = dev_tel->irq;
		if (!cs->irq) {
			printk(KERN_WARNING "Teles: No IRQ for PCI card found\n");
			return(0);
		}
		cs->hw.teles0.membase = (u_long) ioremap(pci_resource_start(dev_tel, 0),
			PAGE_SIZE);
		printk(KERN_INFO "Found: Zoran, base-address: 0x%lx, irq: 0x%x\n",
			pci_resource_start(dev_tel, 0), dev_tel->irq);
	} else {
		printk(KERN_WARNING "TelesPCI: No PCI card found\n");
		return(0);
	}
#else
	printk(KERN_WARNING "HiSax: Teles/PCI and NO_PCI_BIOS\n");
	printk(KERN_WARNING "HiSax: Teles/PCI unable to config\n");
	return (0);
#endif /* CONFIG_PCI */

	/* Initialize Zoran PCI controller */
	writel(0x00000000, cs->hw.teles0.membase + 0x28);
	writel(0x01000000, cs->hw.teles0.membase + 0x28);
	writel(0x01000000, cs->hw.teles0.membase + 0x28);
	writel(0x7BFFFFFF, cs->hw.teles0.membase + 0x2C);
	writel(0x70000000, cs->hw.teles0.membase + 0x3C);
	writel(0x61000000, cs->hw.teles0.membase + 0x40);
	/* writel(0x00800000, cs->hw.teles0.membase + 0x200); */

	printk(KERN_INFO
	       "HiSax: %s config irq:%d mem:%lx\n",
	       CardType[cs->typ], cs->irq,
	       cs->hw.teles0.membase);

	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &TelesPCI_card_msg;
	cs->irq_func = &telespci_interrupt;
	cs->irq_flags |= SA_SHIRQ;
	ISACVersion(cs, "TelesPCI:");
	if (HscxVersion(cs, "TelesPCI:")) {
		printk(KERN_WARNING
		 "TelesPCI: wrong HSCX versions check IO/MEM addresses\n");
		release_io_telespci(cs);
		return (0);
	}
	return (1);
}
示例#30
0
int __devinit
setup_teles3(struct IsdnCard *card)
{
	u_char val;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, teles3_revision);
	printk(KERN_INFO "HiSax: Teles IO driver Rev. %s\n", HiSax_getrev(tmp));
	if ((cs->typ != ISDN_CTYPE_16_3) && (cs->typ != ISDN_CTYPE_PNP)
	    && (cs->typ != ISDN_CTYPE_TELESPCMCIA) && (cs->typ != ISDN_CTYPE_COMPAQ_ISA))
		return (0);

	if (cs->typ == ISDN_CTYPE_16_3) {
		cs->hw.teles3.cfg_reg = card->para[1];
		switch (cs->hw.teles3.cfg_reg) {
			case 0x180:
			case 0x280:
			case 0x380:
				cs->hw.teles3.cfg_reg |= 0xc00;
				break;
		}
		cs->hw.teles3.isac = cs->hw.teles3.cfg_reg - 0x420;
		cs->hw.teles3.hscx[0] = cs->hw.teles3.cfg_reg - 0xc20;
		cs->hw.teles3.hscx[1] = cs->hw.teles3.cfg_reg - 0x820;
	} else if (cs->typ == ISDN_CTYPE_TELESPCMCIA) {
		cs->hw.teles3.cfg_reg = 0;
		cs->hw.teles3.hscx[0] = card->para[1] - 0x20;
		cs->hw.teles3.hscx[1] = card->para[1];
		cs->hw.teles3.isac = card->para[1] + 0x20;
	} else if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
		cs->hw.teles3.cfg_reg = card->para[3];
		cs->hw.teles3.isac = card->para[2] - 32;
		cs->hw.teles3.hscx[0] = card->para[1] - 32;
		cs->hw.teles3.hscx[1] = card->para[1];
	} else {	/* PNP */
		cs->hw.teles3.cfg_reg = 0;
		cs->hw.teles3.isac = card->para[1] - 32;
		cs->hw.teles3.hscx[0] = card->para[2] - 32;
		cs->hw.teles3.hscx[1] = card->para[2];
	}
	cs->irq = card->para[0];
	cs->hw.teles3.isacfifo = cs->hw.teles3.isac + 0x3e;
	cs->hw.teles3.hscxfifo[0] = cs->hw.teles3.hscx[0] + 0x3e;
	cs->hw.teles3.hscxfifo[1] = cs->hw.teles3.hscx[1] + 0x3e;
	if (cs->typ == ISDN_CTYPE_TELESPCMCIA) {
		if (check_region((cs->hw.teles3.hscx[1]), 96 )) {
			printk(KERN_WARNING
			       "HiSax: %s ports %x-%x already in use\n",
			       CardType[cs->typ],
			       cs->hw.teles3.hscx[1],
			       cs->hw.teles3.hscx[1] + 96);
			return (0);
		} else
			request_region(cs->hw.teles3.hscx[1], 96, "HiSax Teles PCMCIA");
	} else {
		if (cs->hw.teles3.cfg_reg) {
			if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
				if (check_region((cs->hw.teles3.cfg_reg), 1)) {
					printk(KERN_WARNING
						"HiSax: %s config port %x already in use\n",
						CardType[card->typ],
						cs->hw.teles3.cfg_reg);
					return (0);
				} else
					request_region(cs->hw.teles3.cfg_reg, 1, "teles3 cfg");
			} else {
				if (check_region((cs->hw.teles3.cfg_reg), 8)) {
					printk(KERN_WARNING
					       "HiSax: %s config port %x-%x already in use\n",
					       CardType[card->typ],
					       cs->hw.teles3.cfg_reg,
						cs->hw.teles3.cfg_reg + 8);
					return (0);
				} else
					request_region(cs->hw.teles3.cfg_reg, 8, "teles3 cfg");
			}
		}
		if (check_region((cs->hw.teles3.isac + 32), 32)) {
			printk(KERN_WARNING
			   "HiSax: %s isac ports %x-%x already in use\n",
			       CardType[cs->typ],
			       cs->hw.teles3.isac + 32,
			       cs->hw.teles3.isac + 64);
			if (cs->hw.teles3.cfg_reg) {
				if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
					release_region(cs->hw.teles3.cfg_reg, 1);
				} else {
					release_region(cs->hw.teles3.cfg_reg, 8);
				}
			}
			return (0);
		} else
			request_region(cs->hw.teles3.isac + 32, 32, "HiSax isac");
		if (check_region((cs->hw.teles3.hscx[0] + 32), 32)) {
			printk(KERN_WARNING
			 "HiSax: %s hscx A ports %x-%x already in use\n",
			       CardType[cs->typ],
			       cs->hw.teles3.hscx[0] + 32,
			       cs->hw.teles3.hscx[0] + 64);
			if (cs->hw.teles3.cfg_reg) {
				if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
					release_region(cs->hw.teles3.cfg_reg, 1);
				} else {
					release_region(cs->hw.teles3.cfg_reg, 8);
				}
			}
			release_ioregs(cs, 1);
			return (0);
		} else
			request_region(cs->hw.teles3.hscx[0] + 32, 32, "HiSax hscx A");
		if (check_region((cs->hw.teles3.hscx[1] + 32), 32)) {
			printk(KERN_WARNING
			 "HiSax: %s hscx B ports %x-%x already in use\n",
			       CardType[cs->typ],
			       cs->hw.teles3.hscx[1] + 32,
			       cs->hw.teles3.hscx[1] + 64);
			if (cs->hw.teles3.cfg_reg) {
				if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
					release_region(cs->hw.teles3.cfg_reg, 1);
				} else {
					release_region(cs->hw.teles3.cfg_reg, 8);
				}
			}
			release_ioregs(cs, 3);
			return (0);
		} else
			request_region(cs->hw.teles3.hscx[1] + 32, 32, "HiSax hscx B");
	}
	if ((cs->hw.teles3.cfg_reg) && (cs->typ != ISDN_CTYPE_COMPAQ_ISA)) {
		if ((val = bytein(cs->hw.teles3.cfg_reg + 0)) != 0x51) {
			printk(KERN_WARNING "Teles: 16.3 Byte at %x is %x\n",
			       cs->hw.teles3.cfg_reg + 0, val);
			release_io_teles3(cs);
			return (0);
		}
		if ((val = bytein(cs->hw.teles3.cfg_reg + 1)) != 0x93) {
			printk(KERN_WARNING "Teles: 16.3 Byte at %x is %x\n",
			       cs->hw.teles3.cfg_reg + 1, val);
			release_io_teles3(cs);
			return (0);
		}
		val = bytein(cs->hw.teles3.cfg_reg + 2);/* 0x1e=without AB
							 * 0x1f=with AB
							 * 0x1c 16.3 ???
							 * 0x39 16.3 1.1
							 * 0x38 16.3 1.3
							 * 0x46 16.3 with AB + Video (Teles-Vision)
							 */
		if (val != 0x46 && val != 0x39 && val != 0x38 && val != 0x1c && val != 0x1e && val != 0x1f) {
			printk(KERN_WARNING "Teles: 16.3 Byte at %x is %x\n",
			       cs->hw.teles3.cfg_reg + 2, val);
			release_io_teles3(cs);
			return (0);
		}
	}
	printk(KERN_INFO
	       "HiSax: %s config irq:%d isac:0x%X  cfg:0x%X\n",
	       CardType[cs->typ], cs->irq,
	       cs->hw.teles3.isac + 32, cs->hw.teles3.cfg_reg);
	printk(KERN_INFO
	       "HiSax: hscx A:0x%X  hscx B:0x%X\n",
	       cs->hw.teles3.hscx[0] + 32, cs->hw.teles3.hscx[1] + 32);

	if (reset_teles3(cs)) {
		printk(KERN_WARNING "Teles3: wrong IRQ\n");
		release_io_teles3(cs);
		return (0);
	}
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Teles_card_msg;
	cs->irq_func = &teles3_interrupt;
	ISACVersion(cs, "Teles3:");
	if (HscxVersion(cs, "Teles3:")) {
		printk(KERN_WARNING
		       "Teles3: wrong HSCX versions check IO address\n");
		release_io_teles3(cs);
		return (0);
	}
	return (1);
}