static void * mts_usb_probe (struct usb_device *dev, unsigned int interface,
const struct usb_device_id *id)
{
int i;
int result;
int ep_out = -1;
int ep_in_set[3]; /* this will break if we have more than three endpoints
which is why we check */
int *ep_in_current = ep_in_set;
struct mts_desc * new_desc;
struct vendor_product const* p;
/* the altsettting 0 on the interface we're probing */
struct usb_interface_descriptor *altsetting;
MTS_DEBUG_GOT_HERE();
MTS_DEBUG( "usb-device descriptor at %x\n", (int)dev );
MTS_DEBUG( "product id = 0x%x, vendor id = 0x%x\n",
(int)dev->descriptor.idProduct,
(int)dev->descriptor.idVendor );
MTS_DEBUG_GOT_HERE();
p = &mts_supported_products[id - mts_usb_ids];
MTS_DEBUG_GOT_HERE();
MTS_DEBUG( "found model %s\n", p->name );
if ( p->support_status != mts_sup_full )
MTS_MESSAGE( "model %s is not known to be fully supported, reports welcome!\n",
p->name );
/* the altsettting 0 on the interface we're probing */
altsetting =
&(dev->actconfig->interface[interface].altsetting[0]);
/* Check if the config is sane */
if ( altsetting->bNumEndpoints != MTS_EP_TOTAL ) {
MTS_WARNING( "expecting %d got %d endpoints! Bailing out.\n",
(int)MTS_EP_TOTAL, (int)altsetting->bNumEndpoints );
return NULL;
}
for( i = 0; i < altsetting->bNumEndpoints; i++ ) {
if ((altsetting->endpoint[i].bmAttributes &
USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) {
MTS_WARNING( "can only deal with bulk endpoints; endpoint %d is not bulk.\n",
(int)altsetting->endpoint[i].bEndpointAddress );
} else {
if (altsetting->endpoint[i].bEndpointAddress &
USB_DIR_IN)
*ep_in_current++
= altsetting->endpoint[i].bEndpointAddress &
USB_ENDPOINT_NUMBER_MASK;
else {
if ( ep_out != -1 ) {
MTS_WARNING( "can only deal with one output endpoints. Bailing out." );
return NULL;
}
ep_out = altsetting->endpoint[i].bEndpointAddress &
USB_ENDPOINT_NUMBER_MASK;
}
}
}
if ( ep_out == -1 ) {
MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" );
return NULL;
}
/* I don't understand the following fully (it's from usb-storage) -- John */
/* set the interface -- STALL is an acceptable response here */
result = usb_set_interface(dev, altsetting->bInterfaceNumber, 0);
MTS_DEBUG("usb_set_interface returned %d.\n",result);
switch( result )
{
case 0: /* no error */
break;
case -EPIPE:
usb_clear_halt(dev, usb_sndctrlpipe(dev, 0));
MTS_DEBUG( "clearing clearing stall on control interface\n" );
break;
default:
MTS_DEBUG( "unknown error %d from usb_set_interface\n",
(int)result );
return NULL;
}
/* allocating a new descriptor */
new_desc = (struct mts_desc *)kmalloc(sizeof(struct mts_desc), GFP_KERNEL);
if (new_desc == NULL)
{
MTS_ERROR("couldn't allocate scanner desc, bailing out!\n");
return NULL;
}
/* As done by usb_alloc_urb */
memset( new_desc, 0, sizeof(*new_desc) );
spin_lock_init(&new_desc->urb.lock);
/* initialising that descriptor */
new_desc->usb_dev = dev;
new_desc->interface = interface;
init_MUTEX(&new_desc->lock);
if(mts_list){
new_desc->host_number = mts_list->host_number+1;
} else {
new_desc->host_number = 0;
}
/* endpoints */
new_desc->ep_out = ep_out;
new_desc->ep_response = ep_in_set[0];
new_desc->ep_image = ep_in_set[1];
if ( new_desc->ep_out != MTS_EP_OUT )
MTS_WARNING( "will this work? Command EP is not usually %d\n",
(int)new_desc->ep_out );
if ( new_desc->ep_response != MTS_EP_RESPONSE )
MTS_WARNING( "will this work? Response EP is not usually %d\n",
(int)new_desc->ep_response );
if ( new_desc->ep_image != MTS_EP_IMAGE )
MTS_WARNING( "will this work? Image data EP is not usually %d\n",
(int)new_desc->ep_image );
/* Initialize the host template based on the default one */
memcpy(&(new_desc->ctempl), &mts_scsi_host_template, sizeof(mts_scsi_host_template));
/* HACK from usb-storage - this is needed for scsi detection */
(struct mts_desc *)new_desc->ctempl.proc_dir = new_desc; /* FIXME */
MTS_DEBUG("registering SCSI module\n");
new_desc->ctempl.module = THIS_MODULE;
result = scsi_register_host(&new_desc->ctempl);
/* Will get hit back in microtek_detect by this func */
if ( result )
{
MTS_ERROR( "error %d from scsi_register_host! Help!\n",
(int)result );
/* FIXME: need more cleanup? */
kfree( new_desc );
return NULL;
}
MTS_DEBUG_GOT_HERE();
/* FIXME: the bomb is armed, must the host be registered under lock ? */
/* join the list - lock it */
down(&mts_list_semaphore);
mts_add_nolock( new_desc );
up(&mts_list_semaphore);
MTS_DEBUG("completed probe and exiting happily\n");
return (void *)new_desc;
}
static int mts_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
int i;
int ep_out = -1;
int ep_in_set[3]; /* this will break if we have more than three endpoints
which is why we check */
int *ep_in_current = ep_in_set;
int err_retval = -ENOMEM;
struct mts_desc * new_desc;
struct vendor_product const* p;
struct usb_device *dev = interface_to_usbdev (intf);
/* the current altsetting on the interface we're probing */
struct usb_host_interface *altsetting;
MTS_DEBUG_GOT_HERE();
MTS_DEBUG( "usb-device descriptor at %x\n", (int)dev );
MTS_DEBUG( "product id = 0x%x, vendor id = 0x%x\n",
le16_to_cpu(dev->descriptor.idProduct),
le16_to_cpu(dev->descriptor.idVendor) );
MTS_DEBUG_GOT_HERE();
p = &mts_supported_products[id - mts_usb_ids];
MTS_DEBUG_GOT_HERE();
MTS_DEBUG( "found model %s\n", p->name );
if ( p->support_status != mts_sup_full )
MTS_MESSAGE( "model %s is not known to be fully supported, reports welcome!\n",
p->name );
/* the current altsetting on the interface we're probing */
altsetting = intf->cur_altsetting;
/* Check if the config is sane */
if ( altsetting->desc.bNumEndpoints != MTS_EP_TOTAL ) {
MTS_WARNING( "expecting %d got %d endpoints! Bailing out.\n",
(int)MTS_EP_TOTAL, (int)altsetting->desc.bNumEndpoints );
return -ENODEV;
}
for( i = 0; i < altsetting->desc.bNumEndpoints; i++ ) {
if ((altsetting->endpoint[i].desc.bmAttributes &
USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) {
MTS_WARNING( "can only deal with bulk endpoints; endpoint %d is not bulk.\n",
(int)altsetting->endpoint[i].desc.bEndpointAddress );
} else {
if (altsetting->endpoint[i].desc.bEndpointAddress &
USB_DIR_IN)
*ep_in_current++
= altsetting->endpoint[i].desc.bEndpointAddress &
USB_ENDPOINT_NUMBER_MASK;
else {
if ( ep_out != -1 ) {
MTS_WARNING( "can only deal with one output endpoints. Bailing out." );
return -ENODEV;
}
ep_out = altsetting->endpoint[i].desc.bEndpointAddress &
USB_ENDPOINT_NUMBER_MASK;
}
}
}
if ( ep_out == -1 ) {
MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" );
return -ENODEV;
}
new_desc = kzalloc(sizeof(struct mts_desc), GFP_KERNEL);
if (!new_desc)
goto out;
new_desc->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!new_desc->urb)
goto out_kfree;
new_desc->context.scsi_status = kmalloc(1, GFP_KERNEL);
if (!new_desc->context.scsi_status)
goto out_kfree2;
new_desc->usb_dev = dev;
new_desc->usb_intf = intf;
init_MUTEX(&new_desc->lock);
/* endpoints */
new_desc->ep_out = ep_out;
new_desc->ep_response = ep_in_set[0];
new_desc->ep_image = ep_in_set[1];
if ( new_desc->ep_out != MTS_EP_OUT )
MTS_WARNING( "will this work? Command EP is not usually %d\n",
(int)new_desc->ep_out );
if ( new_desc->ep_response != MTS_EP_RESPONSE )
MTS_WARNING( "will this work? Response EP is not usually %d\n",
(int)new_desc->ep_response );
if ( new_desc->ep_image != MTS_EP_IMAGE )
MTS_WARNING( "will this work? Image data EP is not usually %d\n",
(int)new_desc->ep_image );
new_desc->host = scsi_host_alloc(&mts_scsi_host_template,
sizeof(new_desc));
if (!new_desc->host)
goto out_free_urb;
new_desc->host->hostdata[0] = (unsigned long)new_desc;
if (scsi_add_host(new_desc->host, NULL)) {
err_retval = -EIO;
goto out_free_urb;
}
scsi_scan_host(new_desc->host);
usb_set_intfdata(intf, new_desc);
return 0;
out_kfree2:
kfree(new_desc->context.scsi_status);
out_free_urb:
usb_free_urb(new_desc->urb);
out_kfree:
kfree(new_desc);
out:
return err_retval;
}