static int nandll_read_page(unsigned char *buf, unsigned long addr, int large_block)
{
int i;
int page_size = 512;
if (large_block)
page_size = 2048;
show("in this fucn\n");
NF_ENABLE_CE;
NF_CLEAR_RB;
NF_CMD(NAND_CMD_READ0);
NF_ADDR(0x0);
if (large_block)
NF_ADDR(0x0); /*从0x0地址开始拷贝*/
NF_ADDR(addr & 0xff);
NF_ADDR((addr >> 8) & 0xff);
NF_ADDR((addr >> 16) & 0xff);
if (large_block)
NF_CMD(NAND_CMD_READSTART);
NF_DETECT_RB;
for (i = 0; i < page_size; i++)
buf[i] = NF_RDDATA8;
NF_DISABLE_CE;
return 0;
}
static int NF_ReadPage(U32 block,U32 page,U8 *buffer,U8 *spareBuf)
{
int i;
unsigned int blockPage;
U8 *bufPt=buffer;
page=page&0x1f;
blockPage=(block<<5)+page;
NF_nFCE_L();
NF_CMD(0x00); // Read command
NF_ADDR(0); // Column = 0
NF_ADDR(blockPage&0xff); //
NF_ADDR((blockPage>>8)&0xff); // Block & Page num.
NF_ADDR((blockPage>>16)&0xff); //
Delay(1); //wait tWB(100ns)/////??????
NF_WAITRB(); // Wait tR(max 12us)
for(i=0;i<(512);i++)
{
*bufPt++=NF_RDDATA(); // Read one page
}
if(spareBuf!=NULL)
{
for(i=0;i<16;i++)
spareBuf[i]=NF_RDDATA(); // Read spare array
}
NF_nFCE_H();
return 1;
}
static int NAND_ReadPage(unsigned long block,unsigned long page,unsigned char *buffer) //?Flash
{
int i;
unsigned int blockPage;
unsigned volatile short *NFCONF;
unsigned volatile short *NFCMD;
unsigned volatile short *NFSTAT;
unsigned volatile short *NFADDR;
unsigned volatile short *NFDATA;
NFCONF=(unsigned short *)0x4e000000;
NFCMD=(unsigned short *)0x4e000004;
NFSTAT=(unsigned short *)0x4e000010;
NFDATA=(unsigned short *)0x4e00000C;
NFADDR=(unsigned short *)0x4e000008;
page=page&0x1f;
blockPage=(block<<5)+page; //1Bolck¥]§t32page
//NF_RSTECC(); // Initialize ECC
NF_nFCE_L();
NF_CMD(0x00); // Read command
NF_ADDR(0); // Column = 0
NF_ADDR(blockPage&0xff); //
NF_ADDR((blockPage>>8)&0xff); // Block & Page num.
NF_ADDR((blockPage>>16)&0xff); //
for(i=0;i<10;i++); //wait tWB(100ns)
NF_WAITRB(); // Wait tR(max 12us)
for(i=0;i<512;i++)
{
*buffer++=NF_RDDATA(); // Read one page
}
NF_nFCE_H();
}
static int NF_IsBadBlock(U32 block)
{
unsigned int blockPage;
U8 data;
blockPage=(block<<5); // For 2'nd cycle I/O[7:5]
NF_nFCE_L();
NF_CMD(0x50); // Spare array read command
NF_ADDR(517&0xf); // Read the mark of bad block in spare array(M addr=5)
NF_ADDR(blockPage&0xff); // The mark of bad block is in 0 page
NF_ADDR((blockPage>>8)&0xff); // For block number A[24:17]
NF_ADDR((blockPage>>16)&0xff); // For block number A[25]
Delay(1); // wait tWB(100ns)
NF_WAITRB(); // Wait tR(max 12us)
data=NF_RDDATA();
NF_nFCE_H();
if(data!=0xff)
{
printf("[block %d:bad block(%x)]\n",block,data);
return 1;
}
else
{
printf(".");
return 0;
}
}
static void rLB_ReadPage(U32 addr, unsigned char * to)
{
U32 i;
rNF_Reset();
// Enable the chip
NF_nFCE_L();
NF_CLEAR_RB();
// Issue Read command
NF_CMD(CMD_READ);
// Set up address
NF_ADDR(0x00);
NF_ADDR(0x00);
NF_ADDR((addr) & 0xff);
NF_ADDR((addr >> 8) & 0xff);
NF_ADDR((addr >> 16) & 0xff);
NF_CMD(CMD_READ3);
NF_DETECT_RB(); // wait tR(max 12us)
for (i = 0; i < 2048; i++)
{
to[i] = NF_RDDATA8();
}
NF_nFCE_H();
}
static int NAND_WritePage(unsigned long block,unsigned long page,unsigned char *buffer) //?Flash
{
int i;
unsigned long blockPage=(block<<5)+page;
//NF_RSTECC(); // Initialize ECC
unsigned volatile short *NFCONF;
unsigned volatile short *NFCMD;
unsigned volatile short *NFSTAT;
unsigned volatile short *NFADDR;
unsigned volatile short *NFDATA;
NFCONF=(unsigned short *)0x4e000000;
NFCMD=(unsigned short *)0x4e000004;
NFSTAT=(unsigned short *)0x4e000010;
NFDATA=(unsigned short *)0x4e00000C;
NFADDR=(unsigned short *)0x4e000008;
NF_nFCE_L();
NF_CMD(0x0); //?????\\Read Mode 1
NF_CMD(0x80); // Write 1st command,?Õu?¤J
NF_ADDR(0); // Column 0
NF_ADDR(blockPage&0xff);
NF_ADDR((blockPage>>8)&0xff); // Block & page num.
NF_ADDR((blockPage>>16)&0xff);
for(i=0;i<512;i++)
{
NF_WRDATA(*buffer++); // Write one page to NFM from buffer
}
#if 0
seBuf[0]=rNFECC0;
seBuf[1]=rNFECC1;
seBuf[2]=rNFECC2;
seBuf[5]=0xff; // Marking good block
for(i=0;i<16;i++)
NF_WRDATA(seBuf[i]); // Write spare array(ECC and Mark)
#endif
NF_CMD(0x10); // Write 2nd command
for(i=0;i<10;i++); //tWB = 100ns. ////??????
NF_WAITRB(); //wait tPROG 200~500us;
NF_CMD(0x70); // Read status command
for(i=0;i<3;i++); //twhr=60ns
if (NF_RDDATA()&0x1)
{
NF_nFCE_H();
return 0;
}//error }
else
{
NF_nFCE_H();
return 1;
}
}
WORD NF_ReadPage(WORD block,WORD page,BYTE* buffer)
{
int i;
WORD blockPage = (block << 5) + page;
BYTE* bufPt = buffer;
BYTE ECCbuf[6];
NF_RSTECC(); // 复位 ECC
NF_MainECCUnlock(); // 解锁本页 main 区域的 ECC 校验，允许生成 ECC 校验码
NF_nFCE_L();
NF_CLEAR_RB(); // 清 RnB 信号
NF_CMD( NF_CMD_RD1 ); // 从本页的上半部分开始读
NF_ADDR( 0 ); // 从本页的第一个列（字节）开始读
NF_ADDR( blockPage & 0xff ); // 这三行代码指明页号
NF_ADDR( ( blockPage >> 8 ) & 0xff );
NF_ADDR( ( blockPage >> 16 ) & 0xff );
NF_WAIT_RB();
// 往本页的 main 区里写入 buffer 里的内容
for(i=0 ; i<NF_MAINSIZE ; i++)
{
buffer[i] = NF_RDDATA8();
}
NF_MainECCLock(); // 锁定 main 区域的 ECC 校验码
NF_SpareECCUnlock(); // 解锁本页 spare 区域的 ECC 校验
// 读 spare 区域的前4个字节，即 main 区域的 ECC 校验码部分
for(i=0 ; i<4 ; i++)
{
ECCbuf[i] = NF_RDDATA8();
}
NF_SpareECCLock(); // 锁定 spare 区域的 ECC 校验码
// 读 spare 区域的第5，第6个字节，即 spare 区域的 ECC 校验码部分
for(i=4 ; i<6 ; i++)
{
ECCbuf[i] = NF_RDDATA8();
}
/* 下面就是验证 ECC 校验码了 */
if(( ECCbuf[0] == (NFMECCD0 & 0xff)) &&
( ECCbuf[1] == ((NFMECCD0 >> 16) & 0xff)) &&
( ECCbuf[2] == (NFMECCD1 & 0xff)) &&
( ECCbuf[3] == ((NFMECCD1 >> 16) & 0xff)) &&
( ECCbuf[4] == (NFSECCD & 0xff)) &&
( ECCbuf[5] == ((NFSECCD >> 16) & 0xff)))
{ // ECC 校验全部成功
NF_nFCE_H();
return 1;
}
else
{ // ECC 校验不成功
static int NF_WritePage(U32 block,U32 page,U8 *buffer,U8 *spareBuf)
{
int i;
U32 blockPage=(block<<5)+page;
U8 *bufPt=buffer;
NF_nFCE_L();
NF_CMD(0x0);
NF_CMD(0x80); // Write 1st command
NF_ADDR(0); // Column 0
NF_ADDR(blockPage&0xff); //
NF_ADDR((blockPage>>8)&0xff); // Block & page num.
NF_ADDR((blockPage>>16)&0xff); //
for(i=0;i<512;i++)
{
NF_WRDATA(*bufPt++); // Write one page to NFM from buffer
}
if(spareBuf!=NULL)
{
for(i=0;i<16;i++)
{
NF_WRDATA(spareBuf[i]); // Write spare array(ECC and Mark)
}
}
NF_CMD(0x10); // Write 2nd command
Delay(1); //tWB = 100ns.
NF_WAITRB(); //wait tPROG 200~500us;
NF_CMD(0x70); // Read status command
Delay(1); //twhr=60ns
if (NF_RDDATA()&0x1) // Page write error
{
NF_nFCE_H();
printf("[PROGRAM_ERROR:block#=%d]\n",block);
NF_MarkBadBlock(block);
return 0;
}
else
{
NF_nFCE_H();
#if (WRITEVERIFY==1)
//return NF_VerifyPage(block,page,pPage);
#else
return 1;
#endif
}
}
static char rNF_ReadID()
{
char pMID;
char pDID;
char nBuff;
char n4thcycle;
int i;
NF_nFCE_L();
NF_CLEAR_RB();
NF_CMD(CMD_READID); // read id command
NF_ADDR(0x0);
for ( i = 0; i < 100; i++ );
pMID = NF_RDDATA8();
pDID = NF_RDDATA8();
nBuff = NF_RDDATA8();
n4thcycle = NF_RDDATA8();
NF_nFCE_H();
return (pDID);
}
static int NF_MarkBadBlock(U32 block)
{
int i;
U32 blockPage=(block<<5);
seBuf[0]=0xff;
seBuf[1]=0xff;
seBuf[2]=0xff;
seBuf[5]=0x44; // Bad blcok mark=0
NF_nFCE_L();
NF_CMD(0x50);
NF_CMD(0x80); // Write 1st command
NF_ADDR(0x0); // The mark of bad block is
NF_ADDR(blockPage&0xff); // marked 5th spare array
NF_ADDR((blockPage>>8)&0xff); // in the 1st page.
NF_ADDR((blockPage>>16)&0xff);
for(i=0;i<16;i++)
{
NF_WRDATA(seBuf[i]); // Write spare array
}
NF_CMD(0x10); // Write 2nd command
Delay(1); //tWB = 100ns.
NF_WAITRB(); // Wait tPROG(200~500us)
NF_CMD(0x70);
Delay(1); //twhr=60ns//
if (NF_RDDATA()&0x1) // Spare arrray write error
{
NF_nFCE_H();
printf("[Program error is occurred but ignored]\n");
}
else
{
NF_nFCE_H();
}
printf("[block #%d is marked as a bad block]\n",block);
return 1;
}
void SubmitSpareAreaReadCmd(DWORD SectorStartAddr, DWORD SpareStartAddr)
{
NF_nFCE_L();
NF_CLEAR_RB();
NF_CMD(CMD_READ); // Send read command.
NF_ADDR((SpareStartAddr)&0xff);
NF_ADDR((SpareStartAddr>>8)&0xff);
NF_ADDR((SectorStartAddr) & 0xff);
NF_ADDR((SectorStartAddr >> 8) & 0xff);
if(g_bNeedExtAddr)
{
NF_ADDR((SectorStartAddr >> 16) & 0xff);
}
NF_CMD(CMD_READ3); // 2nd command
NF_DETECT_RB(); // Wait for command to complete.
}
char __low_nand_write_page(unsigned int page_addr,unsigned char *from)
{
U32 i;
char nfstatus;
unsigned int *pfrom = (unsigned int *)from;//2440的NFADDR寄存器是32位的
// printk("write page addr :%.8x \r\n",page_addr);
// __low_nand_reset();
// Enable the chip
NF_nFCE_L();
NF_CLEAR_RB();
// Issue Read command
NF_CMD(CMD_WRITE1);
// Set up address
NF_ADDR(page_addr & 0xff);
NF_ADDR((page_addr >> 8) & 0x0f);
NF_ADDR((page_addr >> 12) & 0xff);
NF_ADDR((page_addr >> 20) & 0xff);
NF_ADDR((page_addr >> 28) & 0x01);
// NF_WRDATA(0xffffffff);
// NF_WRDATA(0xffffffff);
// NF_WRDATA(0xffffffff);
// NF_WRDATA(0xffffffff);
for(i = 0;i < (NAND_PAGE_SIZE+64) >> 2;++i) {
NF_WRDATA( *((unsigned*)pfrom++));
}
NF_CMD(CMD_WRITE2);
NF_DETECT_RB(); // wait tR(max 12us)
NF_CMD(CMD_STATUS);
return (NF_RDDATA8() & 0x01);
// nfstatus = NF_RDDATA8();
// NF_nFCE_H();
// printk("nand status:%x\r\n",nfstatus);
}
WORD NF_CheckId()
{
WORD id;
NF_nFCE_L();
NF_CLEAR_RB();
NF_CMD( NF_CMD_RDD );
NF_ADDR( 0x0 ); // 指定地址 0x0， 芯片手册要求
NF_WAIT_RB();
id = NF_RDDATA8() << 8; // 厂商 ID
id |= NF_RDDATA8(); // 设备 ID
NF_nFCE_H();
return id;
}
static U16 NF_CheckId(void)
{
U16 id;
NF_nFCE_L();
NF_CMD(0x90);
NF_ADDR(0x0);
Delay(1); //wait tWB(100ns)
id=NF_RDDATA()<<8; // Maker code(K9S1208V:0xec)
id|=NF_RDDATA(); // Devide code(K9S1208V:0x76)
NF_nFCE_H();
return id;
}
void __low_nand_read_page(unsigned int page_addr,unsigned char *to)
{
U32 i;
char nfstatus;
unsigned int *pto = (unsigned int *)to;
// printk("read page addr :%.8x \r\n",page_addr);
// __low_nand_reset();
// Enable the chip
NF_nFCE_L();
NF_CLEAR_RB();
// Issue Read command
NF_CMD(CMD_READ);
// Set up address
NF_ADDR(page_addr & 0xff);
NF_ADDR((page_addr >> 8) & 0x0f);
NF_ADDR((page_addr >> 12) & 0xff);
NF_ADDR((page_addr >> 20) & 0xff);
NF_ADDR((page_addr >> 28) & 0x01);
NF_CMD(CMD_READ2);
NF_DETECT_RB(); // wait tR(max 12us)
for (i = 0; i < (NAND_PAGE_SIZE+64) >> 2;++i) {
*((unsigned*)pto++) = NF_RDDATA();
}
// for (i = 0; i < NAND_PAGE_SIZE ;++i)
// {
// to[i] = NF_RDDATA8();
// }
NF_nFCE_H();
}
char __low_nand_readid(unsigned int *part1,unsigned *part2)
{
char g_nfid1;
char g_nfid2;
char g_nfid3;
char g_nfid4;
char g_nfid5;
char pMID;
char pDID;
char nBuff;
char n4thcycle;
int i;
NF_nFCE_L();
NF_CLEAR_RB();
NF_CMD(CMD_READID); // read id command
NF_ADDR(0x00);
for ( i = 0; i < 100; i++ );
g_nfid1 = NF_RDDATA8();
g_nfid2 = NF_RDDATA8();
g_nfid3 = NF_RDDATA8();
g_nfid4 = NF_RDDATA8();
g_nfid5 = NF_RDDATA8();
pMID = g_nfid1;
pDID = g_nfid2;
nBuff = NF_RDDATA8();
n4thcycle = NF_RDDATA8();
NF_nFCE_H();
return (pDID);
}
static int NF_EraseBlock(U32 block)
{
U32 blockPage=(block<<5);
#if BAD_CHECK
if(NF_IsBadBlock(block) && block!=0) //block #0 can't be bad block for NAND boot
return 0;
#endif
NF_nFCE_L();
NF_CMD(0x60); // Erase one block 1st command
NF_ADDR(blockPage&0xff); // Page number=0
NF_ADDR((blockPage>>8)&0xff);
NF_ADDR((blockPage>>16)&0xff);
NF_CMD(0xd0); // Erase one blcok 2nd command
Delay(1); //wait tWB(100ns)
NF_WAITRB(); // Wait tBERS max 3ms.
NF_CMD(0x70); // Read status command
if (NF_RDDATA()&0x1) // Erase error
{
NF_nFCE_H();
printf("[ERASE_ERROR:block#=%d]\n",block);
NF_MarkBadBlock(block);
return 0;
}
else
{
NF_nFCE_H();
return 1;
}
}
BOOL FMD_LB_ReadSector(SECTOR_ADDR startSectorAddr, LPBYTE pSectorBuff, PSectorInfo pSectorInfoBuff, DWORD dwNumSectors)
{
ULONG SectorAddr = (ULONG)startSectorAddr;
DWORD i;
volatile DWORD rddata;
UINT32 nRetEcc = 0;
DWORD MECCBuf[MAX_SECTORS_PER_PAGE];
UINT16 nSectorLoop;
int NewSpareAddr = NAND_PAGE_SIZE;
int NewDataAddr = 0;
int NewSectorAddr = startSectorAddr;
DWORD SECCBuf1; // 1st Spare ECC
DWORD SECCBuf2; // 2nd Spare ECC(cloned from 1st)
BYTE RawSectorInfo[8];
RETAILMSG(FMD_ZONE_FUNCTION,(TEXT("#### FMD_DRIVER:::FMD_LB_READSECTOR %x %x\r\n"),startSectorAddr,NewDataAddr));
if (!pSectorBuff && !pSectorInfoBuff)
{
return(FALSE);
}
if ( dwNumSectors > 1 )
{
RETAILMSG(FMD_ZONE_ERROR, (TEXT("######## FATAL ERROR => FMD::FMD_ReadSector->dwNumsectors is bigger than 1. \r\n")));
return FALSE;
}
if (!pSectorBuff)
{
return NAND_LB_ReadSectorInfo(startSectorAddr, pSectorInfoBuff);
}
SubmitSpareAreaReadCmd(NewSectorAddr, NewSpareAddr+NAND_SECC1_OFFSET); //< Spare Area Start Address, SECTOR_SIZE(512)*SECTOS_PER_PAGE(4)=2048 -> Physical Page Size
// Read SECC1, SECC2 from Spare area
SECCBuf1 = NF_RDDATA_WORD();
SECCBuf2 = NF_RDDATA_WORD();
// Set address for random access to read SectorInfo and MECC code from Spare Area
NF_CMD(CMD_RDO); // Send read random data output command
NF_ADDR((NewSpareAddr)&0xff);
NF_ADDR(((NewSpareAddr)>>8)&0xff);
NF_CMD(CMD_RDO2); // Command done
if (pSectorInfoBuff) /// Read SectorInfo doesn't check this
{
ReadOneSectorInfo(RawSectorInfo); ///< Read One SectorInfo by sizeof(SectorInfo)
// Check ECC abour SectorInfo
NF_WRMECCD0( ((SECCBuf1&0xff00)<<8)|(SECCBuf1&0xff) );
NF_WRMECCD1( ((SECCBuf1&0xff000000)>>8)|((SECCBuf1&0xff0000)>>16) );
nRetEcc = NF_ECC_ERR0;
if (!ECC_CorrectData(startSectorAddr, RawSectorInfo, nRetEcc, ECC_CORRECT_SPARE1)) // Use specific byte
{
RETAILMSG(FMD_ZONE_ERROR, (TEXT("#### SECC1 ECC correction failed\n")));
NF_nFCE_H();
return FALSE;
}
RestructSectorInfo(pSectorInfoBuff, RawSectorInfo);
}
else
{
for(i=0; i<sizeof(SectorInfo)/sizeof(DWORD); i++)