示例#1
0
/*
	PCI device probe & initialization function
*/
static int DEVINIT rt_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
{
	void *pAd = NULL, *handle;
	struct net_device *net_dev;
	const char *print_name;
	unsigned long csr_addr;
	int rv = 0;
	RTMP_OS_NETDEV_OP_HOOK netDevHook;
	unsigned long OpMode;

	DBGPRINT(RT_DEBUG_TRACE, ("===> %s()\n", __FUNCTION__));

/*PCIDevInit============================================== */
	/* wake up and enable device */
	if ((rv = pci_enable_device(pdev))!= 0)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("Enable PCI device failed, errno=%d!\n", rv));
		return rv;
	}

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
	print_name = pci_name(pdev);
#else
	print_name = pdev->slot_name;
#endif /* LINUX_VERSION_CODE */

	if ((rv = pci_request_regions(pdev, print_name)) != 0)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("Request PCI resource failed, errno=%d!\n", rv));
		goto err_out;
	}
	
	/* map physical address to virtual address for accessing register */
	csr_addr = (unsigned long) ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
	if (!csr_addr)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("ioremap failed for device %s, region 0x%lX @ 0x%lX\n",
					print_name, (ULONG)pci_resource_len(pdev, 0), (ULONG)pci_resource_start(pdev, 0)));
		goto err_out_free_res;
	}
	else
	{
		DBGPRINT(RT_DEBUG_TRACE, ("%s: at 0x%lx, VA 0x%lx, IRQ %d. \n",  print_name, 
					(ULONG)pci_resource_start(pdev, 0), (ULONG)csr_addr, pdev->irq));
	}

	/* Set DMA master */
	pci_set_master(pdev);

	/* Allocate RTMP_ADAPTER adapter structure */
	os_alloc_mem(NULL, (UCHAR **)&handle, sizeof(struct os_cookie));
	if (handle == NULL)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("%s(): Allocate memory for os handle failed!\n", __FUNCTION__));
		goto err_out_iounmap;
	}
	memset(handle, 0, sizeof(struct os_cookie));

	((POS_COOKIE)handle)->pci_dev = pdev;

#ifdef OS_ABL_FUNC_SUPPORT
{
	RTMP_PCI_CONFIG PciConfig;
	PciConfig.ConfigVendorID = PCI_VENDOR_ID;
	/* get DRIVER operations */
	RTMP_DRV_OPS_FUNCTION(pRtmpDrvOps, NULL, &PciConfig, NULL);
}
#endif /* OS_ABL_FUNC_SUPPORT */

	rv = RTMPAllocAdapterBlock(handle, &pAd);	/* we may need the pdev for allocate structure of "RTMP_ADAPTER" */
	if (rv != NDIS_STATUS_SUCCESS) 
		goto err_out_iounmap;

#ifdef MULTI_INF_SUPPORT
	if (pAdGlobalList[0] == NULL)
		pAdGlobalList[0] = pAd;
	else if (pAdGlobalList[1] == NULL) 	
		pAdGlobalList[1] = pAd;
	else
		DBGPRINT(RT_DEBUG_ERROR, ("%s(): pAdGlobalList assign Error !\n", __FUNCTION__));	
#endif /* MULTI_INF_SUPPORT */

	RTMP_DRIVER_PCI_CSR_SET(pAd, csr_addr);

	RTMP_DRIVER_PCIE_INIT(pAd, pdev);

/*NetDevInit============================================== */
	net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
	if (net_dev == NULL)
		goto err_out_free_radev;
	
	/* Here are the net_device structure with pci-bus specific parameters. */
	net_dev->irq = pdev->irq;		/* Interrupt IRQ number */
	net_dev->base_addr = csr_addr;		/* Save CSR virtual address and irq to device structure */
	pci_set_drvdata(pdev, net_dev);	/* Set driver data */
	

/*All done, it's time to register the net device to linux kernel. */
	/* Register this device */
#ifdef RT_CFG80211_SUPPORT
{
/*	pAd->pCfgDev = &(pdev->dev); */
/*	pAd->CFG80211_Register = CFG80211_Register; */
/*	RTMP_DRIVER_CFG80211_INIT(pAd, pdev); */

	/*
		In 2.6.32, cfg80211 register must be before register_netdevice();
		We can not put the register in rt28xx_open();
		Or you will suffer NULL pointer in list_add of
		cfg80211_netdev_notifier_call().
	*/
	CFG80211_Register(pAd, &(pdev->dev), net_dev);
}
#endif /* RT_CFG80211_SUPPORT */

	RTMP_DRIVER_OP_MODE_GET(pAd, &OpMode);
	rv = RtmpOSNetDevAttach(OpMode, net_dev, &netDevHook);
	if (rv)
		goto err_out_free_netdev;


#ifdef PRE_ASSIGN_MAC_ADDR
{
	UCHAR mac_addr[MAC_ADDR_LEN];
	RTMP_DRIVER_MAC_ADDR_GET(pAd, &mac_addr[0]);
	DBGPRINT(RT_DEBUG_TRACE, ("@%s MAC address: %02x:%02x:%02x:%02x:%02x:%02x\n",
				__FUNCTION__, mac_addr[0], mac_addr[1],
				mac_addr[2], mac_addr[3],
				mac_addr[4], mac_addr[5]));
	/* Set up the Mac address */
	RtmpOSNetDevAddrSet(OpMode, net_dev, &mac_addr[0], NULL);
}
#endif /* PRE_ASSIGN_MAC_ADDR */

	DBGPRINT(RT_DEBUG_TRACE, ("<=== %s()\n", __FUNCTION__));

	return 0; /* probe ok */


	/* --------------------------- ERROR HANDLE --------------------------- */
err_out_free_netdev:
	RtmpOSNetDevFree(net_dev);
	
err_out_free_radev:
	/* free RTMP_ADAPTER strcuture and os_cookie*/
	RTMPFreeAdapter(pAd);

err_out_iounmap:
	iounmap((void *)(csr_addr));
	release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); 
	
err_out_free_res:
	pci_release_regions(pdev);
	
err_out:
	pci_disable_device(pdev);

	DBGPRINT(RT_DEBUG_ERROR, ("<=== %s() failed with rv = %d!\n",
				__FUNCTION__, rv));

	return -ENODEV; /* probe fail */
}
static INT __devinit   rt2860_probe(
    IN  struct pci_dev              *pci_dev, 
    IN  const struct pci_device_id  *pci_id)
{
	VOID 				*pAd = NULL;
	struct  net_device	*net_dev;
	PVOID				handle;
	PSTRING				print_name;
	ULONG				csr_addr;
	INT rv = 0;
	RTMP_OS_NETDEV_OP_HOOK	netDevHook;
	ULONG					OpMode;

	DBGPRINT(RT_DEBUG_TRACE, ("===> rt2860_probe\n"));

/*PCIDevInit============================================== */
	/* wake up and enable device */
	if ((rv = pci_enable_device(pci_dev))!= 0)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("Enable PCI device failed, errno=%d!\n", rv));
		return rv;
	}

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
	print_name = pci_name(pci_dev);
#else
	print_name = pci_dev->slot_name;
#endif /* LINUX_VERSION_CODE */

	if ((rv = pci_request_regions(pci_dev, print_name)) != 0)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("Request PCI resource failed, errno=%d!\n", rv));
		goto err_out;
	}
	
	/* map physical address to virtual address for accessing register */
	csr_addr = (unsigned long) ioremap(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0));
	if (!csr_addr)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("ioremap failed for device %s, region 0x%lX @ 0x%lX\n",
					print_name, (ULONG)pci_resource_len(pci_dev, 0), (ULONG)pci_resource_start(pci_dev, 0)));
		goto err_out_free_res;
	}
	else
	{
		DBGPRINT(RT_DEBUG_TRACE, ("%s: at 0x%lx, VA 0x%lx, IRQ %d. \n",  print_name, 
					(ULONG)pci_resource_start(pci_dev, 0), (ULONG)csr_addr, pci_dev->irq));
	}

	/* Set DMA master */
	pci_set_master(pci_dev);


/*RtmpDevInit============================================== */
	/* Allocate RTMP_ADAPTER adapter structure */
/*	handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL); */
	os_alloc_mem(NULL, (UCHAR **)&handle, sizeof(struct os_cookie));
	if (handle == NULL)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("%s(): Allocate memory for os handle failed!\n", __FUNCTION__));
		goto err_out_iounmap;
	}
	memset(handle, 0, sizeof(struct os_cookie));

	((POS_COOKIE)handle)->pci_dev = pci_dev;

#ifdef OS_ABL_FUNC_SUPPORT
{
	RTMP_PCI_CONFIG PciConfig;
	PciConfig.ConfigVendorID = PCI_VENDOR_ID;
	/* get DRIVER operations */
	RTMP_DRV_OPS_FUNCTION(pRtmpDrvOps, NULL, &PciConfig, NULL);
}
#endif /* OS_ABL_FUNC_SUPPORT */

	rv = RTMPAllocAdapterBlock(handle, &pAd);	/* we may need the pci_dev for allocate structure of "RTMP_ADAPTER" */
	if (rv != NDIS_STATUS_SUCCESS) 
		goto err_out_iounmap;
	/* Here are the RTMP_ADAPTER structure with pci-bus specific parameters. */
/*	pAd->CSRBaseAddress = (PUCHAR)csr_addr; */
	RTMP_DRIVER_PCI_CSR_SET(pAd, csr_addr);

/*	RTMPInitPCIeDevice(pci_dev, pAd); */
	RTMP_DRIVER_PCIE_INIT(pAd, pci_dev);

/*NetDevInit============================================== */
	net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
	if (net_dev == NULL)
		goto err_out_free_radev;
	
	/* Here are the net_device structure with pci-bus specific parameters. */
	net_dev->irq = pci_dev->irq;		/* Interrupt IRQ number */
	net_dev->base_addr = csr_addr;		/* Save CSR virtual address and irq to device structure */
	pci_set_drvdata(pci_dev, net_dev);	/* Set driver data */
	
#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
/* for supporting Network Manager */
	/* Set the sysfs physical device reference for the network logical device
	  * if set prior to registration will cause a symlink during initialization.
	 */
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
	SET_NETDEV_DEV(net_dev, &(pci_dev->dev));
#endif
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */

/*All done, it's time to register the net device to linux kernel. */
	/* Register this device */
#ifdef RT_CFG80211_SUPPORT
{
/*	pAd->pCfgDev = &(pci_dev->dev); */
/*	pAd->CFG80211_Register = CFG80211_Register; */
/*	RTMP_DRIVER_CFG80211_INIT(pAd, pci_dev); */

	/*
		In 2.6.32, cfg80211 register must be before register_netdevice();
		We can not put the register in rt28xx_open();
		Or you will suffer NULL pointer in list_add of
		cfg80211_netdev_notifier_call().
	*/
	CFG80211_Register(pAd, &(pci_dev->dev), net_dev);
}
#endif /* RT_CFG80211_SUPPORT */

	RTMP_DRIVER_OP_MODE_GET(pAd, &OpMode);
	rv = RtmpOSNetDevAttach(OpMode, net_dev, &netDevHook);
	if (rv)
		goto err_out_free_netdev;

#ifdef CONFIG_STA_SUPPORT
/*	pAd->StaCfg.OriDevType = net_dev->type; */
	RTMP_DRIVER_STA_DEV_TYPE_SET(pAd, net_dev->type);
#endif /* CONFIG_STA_SUPPORT */

/*#ifdef KTHREAD_SUPPORT */
#ifdef PRE_ASSIGN_MAC_ADDR
	UCHAR PermanentAddress[MAC_ADDR_LEN];
	RTMP_DRIVER_MAC_ADDR_GET(pAd, &PermanentAddress[0]);
	DBGPRINT(RT_DEBUG_TRACE, ("@%s MAC address: %02x:%02x:%02x:%02x:%02x:%02x\n", __FUNCTION__, PermanentAddress[0], PermanentAddress[1],PermanentAddress[2],PermanentAddress[3],PermanentAddress[4],PermanentAddress[5]));
	/* Set up the Mac address */
	RtmpOSNetDevAddrSet(OpMode, net_dev, &PermanentAddress[0], NULL);
#endif /* PRE_ASSIGN_MAC_ADDR */

	DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2860_probe\n"));

	return 0; /* probe ok */


	/* --------------------------- ERROR HANDLE --------------------------- */
err_out_free_netdev:
	RtmpOSNetDevFree(net_dev);
	
err_out_free_radev:
	/* free RTMP_ADAPTER strcuture and os_cookie*/
	RTMPFreeAdapter(pAd);

err_out_iounmap:
	iounmap((void *)(csr_addr));
	release_mem_region(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0)); 
	
err_out_free_res:
	pci_release_regions(pci_dev);
	
err_out:
	pci_disable_device(pci_dev);

	DBGPRINT(RT_DEBUG_ERROR, ("<=== rt2860_probe failed with rv = %d!\n", rv));

	return -ENODEV; /* probe fail */
}
示例#3
0
static int rt2870_probe(
	IN struct usb_interface *intf,
	IN struct usb_device *usb_dev,
	IN const USB_DEVICE_ID *dev_id,
	IN VOID **ppAd)
{
	struct  net_device		*net_dev = NULL;
	VOID       				*pAd = (VOID *) NULL;
	INT                 	status, rv;
	PVOID					handle;
	RTMP_OS_NETDEV_OP_HOOK	netDevHook;
	ULONG					OpMode;
#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
/*	INT 		pm_usage_cnt; */
	INT		 res =1 ; 
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */	

	

	DBGPRINT(RT_DEBUG_TRACE, ("===>rt2870_probe()!\n"));
	
#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND

        res = usb_autopm_get_interface(intf);
	if (res)
	{
			DBGPRINT(RT_DEBUG_ERROR, ("rt2870_probe autopm_resume fail ------\n"));
		     return -EIO;
	}

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
	atomic_set(&intf->pm_usage_cnt, 1);
	 printk(" rt2870_probe ====> pm_usage_cnt %d \n", atomic_read(&intf->pm_usage_cnt));
#else
         intf->pm_usage_cnt = 1;
	 printk(" rt2870_probe ====> pm_usage_cnt %d \n", intf->pm_usage_cnt);
#endif
	

#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */



/*RtmpDevInit============================================= */
	/* Allocate RTMP_ADAPTER adapter structure */
/*	handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL); */
	os_alloc_mem(NULL, (UCHAR **)&handle, sizeof(struct os_cookie));
	if (handle == NULL)
	{
		printk("rt2870_probe(): Allocate memory for os handle failed!\n");
		return -ENOMEM;
	}
	memset(handle, 0, sizeof(struct os_cookie));

	((POS_COOKIE)handle)->pUsb_Dev = usb_dev;

#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
	((POS_COOKIE)handle)->intf = intf;
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */



	/* set/get operators to/from DRIVER module */
#ifdef OS_ABL_FUNC_SUPPORT
	/* get DRIVER operations */
	RtmpNetOpsInit(pRtmpDrvNetOps);
	RTMP_DRV_OPS_FUNCTION(pRtmpDrvOps, pRtmpDrvNetOps, NULL, NULL);
	RtmpNetOpsSet(pRtmpDrvNetOps);
#endif /* OS_ABL_FUNC_SUPPORT */

	rv = RTMPAllocAdapterBlock(handle, &pAd);
	if (rv != NDIS_STATUS_SUCCESS) 
	{
/*		kfree(handle); */
		os_free_mem(NULL, handle);
		goto err_out;
	}

/*USBDevInit============================================== */
	if (USBDevConfigInit(usb_dev, intf, pAd) == FALSE)
		goto err_out_free_radev;

	RtmpRaDevCtrlInit(pAd, RTMP_DEV_INF_USB);
	
/*NetDevInit============================================== */
	net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
	if (net_dev == NULL)
		goto err_out_free_radev;
	
	/* Here are the net_device structure with usb specific parameters. */
#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
	/* for supporting Network Manager.
	  * Set the sysfs physical device reference for the network logical device if set prior to registration will 
	  * cause a symlink during initialization.
	 */
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
	SET_NETDEV_DEV(net_dev, &(usb_dev->dev));
#endif
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */

#ifdef CONFIG_STA_SUPPORT
/*    pAd->StaCfg.OriDevType = net_dev->type; */
	RTMP_DRIVER_STA_DEV_TYPE_SET(pAd, net_dev->type);
#endif /* CONFIG_STA_SUPPORT */

/*All done, it's time to register the net device to linux kernel. */
	/* Register this device */
#ifdef RT_CFG80211_SUPPORT
{
/*	pAd->pCfgDev = &(usb_dev->dev); */
/*	pAd->CFG80211_Register = CFG80211_Register; */
/*	RTMP_DRIVER_CFG80211_INIT(pAd, usb_dev); */

	/*
		In 2.6.32, cfg80211 register must be before register_netdevice();
		We can not put the register in rt28xx_open();
		Or you will suffer NULL pointer in list_add of
		cfg80211_netdev_notifier_call().
	*/
	CFG80211_Register(pAd, &(usb_dev->dev), net_dev);
}
#endif /* RT_CFG80211_SUPPORT */

	RTMP_DRIVER_OP_MODE_GET(pAd, &OpMode);
	status = RtmpOSNetDevAttach(OpMode, net_dev, &netDevHook);
	if (status != 0)
		goto err_out_free_netdev;

/*#ifdef KTHREAD_SUPPORT */

	*ppAd = pAd;

#ifdef INF_PPA_SUPPORT
/*	pAd->pDirectpathCb = (PPA_DIRECTPATH_CB *) kmalloc (sizeof(PPA_DIRECTPATH_CB), GFP_ATOMIC); */
/*	os_alloc_mem(NULL, (UCHAR **)&(pAd->pDirectpathCb), sizeof(PPA_DIRECTPATH_CB)); */
	RTMP_DRIVER_INF_PPA_INIT(pAd);
#endif /* INF_PPA_SUPPORT */

#ifdef PRE_ASSIGN_MAC_ADDR
	UCHAR PermanentAddress[MAC_ADDR_LEN];
	RTMP_DRIVER_MAC_ADDR_GET(pAd, &PermanentAddress[0]);
	DBGPRINT(RT_DEBUG_TRACE, ("@%s MAC address: %02x:%02x:%02x:%02x:%02x:%02x\n", __FUNCTION__, PermanentAddress[0], PermanentAddress[1],PermanentAddress[2],PermanentAddress[3],PermanentAddress[4],PermanentAddress[5]));
	/* Set up the Mac address */
	RtmpOSNetDevAddrSet(OpMode, net_dev, &PermanentAddress[0], NULL);
#endif /* PRE_ASSIGN_MAC_ADDR */

#ifdef CONFIG_HAS_EARLYSUSPEND
	RTMP_DRIVER_ADAPTER_REGISTER_EARLYSUSPEND(pAd);
#endif

#ifdef EXT_BUILD_CHANNEL_LIST
	RTMP_DRIVER_SET_PRECONFIG_VALUE(pAd);
#endif /* EXT_BUILD_CHANNEL_LIST */

	DBGPRINT(RT_DEBUG_TRACE, ("<===rt2870_probe()!\n"));

	return 0;

	/* --------------------------- ERROR HANDLE --------------------------- */	
err_out_free_netdev:
	RtmpOSNetDevFree(net_dev);
	
err_out_free_radev:
	RTMPFreeAdapter(pAd);
	
err_out:
	*ppAd = NULL;

	return -1;
	
}
示例#4
0
static int rt2870_probe(
	struct usb_interface *intf,
	struct usb_device *usb_dev,
	const USB_DEVICE_ID *dev_id,
	VOID **ppAd)
{
	struct net_device *net_dev = NULL;
#ifdef RESUME_WITH_USB_RESET_SUPPORT
	VOID *pAd = (VOID *) gpAd;
#else
	VOID *pAd = (VOID *) NULL;
#endif /* RESUME_WITH_USB_RESET_SUPPORT */

	INT status, rv;
	PVOID handle;
	RTMP_OS_NETDEV_OP_HOOK netDevHook;
	ULONG OpMode;
#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
/*	INT pm_usage_cnt; */
	INT res =1 ; 
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */	

	DBGPRINT(RT_DEBUG_TRACE, ("===>rt2870_probe()!\n"));
	
#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
        res = usb_autopm_get_interface(intf);
	if (res)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("rt2870_probe autopm_resume fail ------\n"));
		return -EIO;
	}

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
	atomic_set(&intf->pm_usage_cnt, 1);
	 printk(" rt2870_probe ====> pm_usage_cnt %d \n", atomic_read(&intf->pm_usage_cnt));
#else
         intf->pm_usage_cnt = 1;
	 printk(" rt2870_probe ====> pm_usage_cnt %d \n", intf->pm_usage_cnt);
#endif
	
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */


	os_alloc_mem(NULL, (UCHAR **)&handle, sizeof(struct os_cookie));
	if (handle == NULL)
	{
		printk("rt2870_probe(): Allocate memory for os handle failed!\n");
		return -ENOMEM;
	}
	memset(handle, 0, sizeof(struct os_cookie));

	((POS_COOKIE)handle)->pUsb_Dev = usb_dev;

#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
	((POS_COOKIE)handle)->intf = intf;
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */

	/* set/get operators to/from DRIVER module */
#ifdef OS_ABL_FUNC_SUPPORT
	/* get DRIVER operations */
	RtmpNetOpsInit(pRtmpDrvNetOps);
	RTMP_DRV_OPS_FUNCTION(pRtmpDrvOps, pRtmpDrvNetOps, NULL, NULL);
	RtmpNetOpsSet(pRtmpDrvNetOps);
#endif /* OS_ABL_FUNC_SUPPORT */

#ifdef RESUME_WITH_USB_RESET_SUPPORT
	if (rtusb_fast_probe(handle, &pAd, intf) == NDIS_STATUS_SUCCESS)
	{
		*ppAd = pAd;
		goto fast_probe_done;
	}	

#endif /* RESUME_WITH_USB_RESET_SUPPORT */

	rv = RTMPAllocAdapterBlock(handle, &pAd);
	if (rv != NDIS_STATUS_SUCCESS) 
	{
		os_free_mem(NULL, handle);
		goto err_out;
	}

	if (USBDevConfigInit(usb_dev, intf, pAd) == FALSE)
		goto err_out_free_radev;

	RTMP_DRIVER_USB_INIT(pAd, usb_dev, dev_id->driver_info);
	
	net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
	if (net_dev == NULL)
		goto err_out_free_radev;
	
	/* Here are the net_device structure with usb specific parameters. */
#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
	/* for supporting Network Manager.
	  * Set the sysfs physical device reference for the network logical device if set prior to registration will 
	  * cause a symlink during initialization.
	 */
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
	SET_NETDEV_DEV(net_dev, &(usb_dev->dev));
#endif
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */

#ifdef CONFIG_STA_SUPPORT
/*    pAd->StaCfg.OriDevType = net_dev->type; */
	RTMP_DRIVER_STA_DEV_TYPE_SET(pAd, net_dev->type);
#ifdef PROFILE_PATH_DYNAMIC
	RTMP_DRIVER_STA_PROFILEPATH_SET(pAd, (ULONG)profilePath);
#endif /* PROFILE_PATH_DYNAMIC */
#endif /* CONFIG_STA_SUPPORT */

/*All done, it's time to register the net device to linux kernel. */
	/* Register this device */
#ifdef RT_CFG80211_SUPPORT
{
/*	pAd->pCfgDev = &(usb_dev->dev); */
/*	pAd->CFG80211_Register = CFG80211_Register; */
/*	RTMP_DRIVER_CFG80211_INIT(pAd, usb_dev); */

	/*
		In 2.6.32, cfg80211 register must be before register_netdevice();
		We can not put the register in rt28xx_open();
		Or you will suffer NULL pointer in list_add of
		cfg80211_netdev_notifier_call().
	*/
	CFG80211_Register(pAd, &(usb_dev->dev), net_dev);
}
#endif /* RT_CFG80211_SUPPORT */

	RTMP_DRIVER_OP_MODE_GET(pAd, &OpMode);
	status = RtmpOSNetDevAttach(OpMode, net_dev, &netDevHook);
	if (status != 0)
		goto err_out_free_netdev;

/*#ifdef KTHREAD_SUPPORT */
#if 0 /* move to RtmpOSTaskInit() */
{
	RT_CMD_WAIT_QUEUE_LIST List, *pList = &List;
	RTMP_DRIVER_TASK_LIST_GET(pAd, &List);

	init_waitqueue_head(&(RTMP_OS_TASK_GET(pList->pMlmeTask)->kthread_q));
#ifdef RTMP_TIMER_TASK_SUPPORT
	init_waitqueue_head(&(RTMP_OS_TASK_GET(pList->pTimerTask)->kthread_q));
#endif /* RTMP_TIMER_TASK_SUPPORT */
	init_waitqueue_head(&(RTMP_OS_TASK_GET(pList->pCmdQTask)->kthread_q));
#ifdef WSC_INCLUDED
	init_waitqueue_head(&(RTMP_OS_TASK_GET(pList->pWscTask)->kthread_q));
#endif /* WSC_INCLUDED */
}
#endif /* KTHREAD_SUPPORT */

	*ppAd = pAd;
#ifdef RESUME_WITH_USB_RESET_SUPPORT
	gpAd = pAd;
#endif /* RESUME_WITH_USB_RESET_SUPPORT */

#ifdef INF_PPA_SUPPORT
	RTMP_DRIVER_INF_PPA_INIT(pAd);
#endif /* INF_PPA_SUPPORT */

#ifdef PRE_ASSIGN_MAC_ADDR
{
	UCHAR PermanentAddress[MAC_ADDR_LEN];
	RTMP_DRIVER_MAC_ADDR_GET(pAd, &PermanentAddress[0]);
	DBGPRINT(RT_DEBUG_TRACE, ("%s():MAC Addr - %02x:%02x:%02x:%02x:%02x:%02x\n",
				__FUNCTION__, PermanentAddress[0], PermanentAddress[1],
				PermanentAddress[2],PermanentAddress[3],
				PermanentAddress[4],PermanentAddress[5]));

	/* Set up the Mac address */
	RtmpOSNetDevAddrSet(OpMode, net_dev, &PermanentAddress[0], NULL);
}
#endif /* PRE_ASSIGN_MAC_ADDR */

#ifdef EXT_BUILD_CHANNEL_LIST
	RTMP_DRIVER_SET_PRECONFIG_VALUE(pAd);
#endif /* EXT_BUILD_CHANNEL_LIST */

	DBGPRINT(RT_DEBUG_TRACE, ("<===rt2870_probe()!\n"));

	return 0;

	/* --------------------------- ERROR HANDLE --------------------------- */	
err_out_free_netdev:
	RtmpOSNetDevFree(net_dev);
	
err_out_free_radev:
	RTMPFreeAdapter(pAd);
	
err_out:
	*ppAd = NULL;

	return -1;
	
#ifdef RESUME_WITH_USB_RESET_SUPPORT
fast_probe_done:
	printk("fast probe done\n");
	return 0;
#endif /* RESUME_WITH_USB_RESET_SUPPORT */
}