示例#1
0
文件: tls.c 项目: flrl/openbsd
int
tls_configure_ssl(struct tls *ctx)
{
	SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_SSLv2);
	SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_SSLv3);

	SSL_CTX_clear_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1);
	SSL_CTX_clear_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1_1);
	SSL_CTX_clear_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1_2);

	if ((ctx->config->protocols & TLS_PROTOCOL_TLSv1_0) == 0)
		SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1);
	if ((ctx->config->protocols & TLS_PROTOCOL_TLSv1_1) == 0)
		SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1_1);
	if ((ctx->config->protocols & TLS_PROTOCOL_TLSv1_2) == 0)
		SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1_2);

	if (ctx->config->ciphers != NULL) {
		if (SSL_CTX_set_cipher_list(ctx->ssl_ctx,
		    ctx->config->ciphers) != 1) {
			tls_set_error(ctx, "failed to set ciphers");
			goto err;
		}
	}

	return (0);

err:
	return (-1);
}
示例#2
0
int
tls_configure_ssl(struct tls *ctx)
{
	SSL_CTX_set_mode(ctx->ssl_ctx, SSL_MODE_ENABLE_PARTIAL_WRITE);
	SSL_CTX_set_mode(ctx->ssl_ctx, SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER);

	SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_SSLv2);
	SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_SSLv3);

	SSL_CTX_clear_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1);
	SSL_CTX_clear_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1_1);
	SSL_CTX_clear_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1_2);

	if ((ctx->config->protocols & TLS_PROTOCOL_TLSv1_0) == 0)
		SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1);
	if ((ctx->config->protocols & TLS_PROTOCOL_TLSv1_1) == 0)
		SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1_1);
	if ((ctx->config->protocols & TLS_PROTOCOL_TLSv1_2) == 0)
		SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1_2);

	if (ctx->config->ciphers != NULL) {
		if (SSL_CTX_set_cipher_list(ctx->ssl_ctx,
		    ctx->config->ciphers) != 1) {
			tls_set_errorx(ctx, "failed to set ciphers");
			goto err;
		}
	}

	SSL_CTX_set_info_callback(ctx->ssl_ctx, tls_info_callback);

	return (0);

err:
	return (-1);
}
示例#3
0
文件: ssl_ctx.c 项目: 3dn37/ourfa
int ourfa_ssl_ctx_set_ssl_type(ourfa_ssl_ctx_t *ssl_ctx, unsigned ssl_type)
{
   const char *cipher_list = "ADH-RC4-MD5";

   assert(ssl_ctx);
   if (ssl_ctx->ssl_type == ssl_type)
      return OURFA_OK;

   switch (ssl_type) {
      case OURFA_SSL_TYPE_NONE:
	 /* XXX */
	 SSL_CTX_set_options(ssl_ctx->ssl_ctx, SSL_OP_NO_TLSv1 | SSL_OP_NO_SSLv2 | SSL_OP_NO_SSLv3);
	 break;
      case OURFA_SSL_TYPE_TLS1:
	 SSL_CTX_set_options(ssl_ctx->ssl_ctx, SSL_OP_NO_SSLv2 | SSL_OP_NO_SSLv3);
#ifdef SSL_CTRL_CLEAR_OPTIONS
	 SSL_CTX_clear_options(ssl_ctx->ssl_ctx, SSL_OP_NO_TLSv1);
#endif
	 break;
      case OURFA_SSL_TYPE_SSL3:
	 SSL_CTX_set_options(ssl_ctx->ssl_ctx, SSL_OP_NO_TLSv1 | SSL_OP_NO_SSLv2);
#ifdef SSL_CTRL_CLEAR_OPTIONS
	 SSL_CTX_clear_options(ssl_ctx->ssl_ctx, SSL_OP_NO_SSLv3);
#endif
	 break;
      case OURFA_SSL_TYPE_RSA_CRT:
	 SSL_CTX_set_options(ssl_ctx->ssl_ctx, SSL_OP_NO_TLSv1 | SSL_OP_NO_SSLv2);
#ifdef SSL_CTRL_CLEAR_OPTIONS
	 SSL_CTX_clear_options(ssl_ctx->ssl_ctx, SSL_OP_NO_SSLv3);
#endif
	 cipher_list = "RC4-MD5";
	 break;
      case OURFA_SSL_TYPE_CRT:
	 /* XXX: Cert, key required  */
	 SSL_CTX_set_options(ssl_ctx->ssl_ctx, SSL_OP_NO_TLSv1 | SSL_OP_NO_SSLv2);
#ifdef SSL_CTRL_CLEAR_OPTIONS
	 SSL_CTX_clear_options(ssl_ctx->ssl_ctx, SSL_OP_NO_SSLv3);
#endif
	 break;
      default:
	 return ssl_ctx->printf_err(OURFA_ERROR_WRONG_SSL_TYPE, ssl_ctx->err_ctx,
	       "Unknown requested SSL type 0x%x", ssl_type);
   } /* switch (ssl_type)  */

   ssl_ctx->ssl_type = ssl_type;

   if ((ssl_type != OURFA_SSL_TYPE_NONE)
	 && SSL_CTX_set_cipher_list(ssl_ctx->ssl_ctx, cipher_list) == 0) {
      return ssl_ctx->printf_err(OURFA_ERROR_WRONG_CLIENT_CERTIFICATE, ssl_ctx->err_ctx,
	    "SSL_CTX_set_cipher_list(""%s"") Failed",
	    cipher_list);
   }

   return OURFA_OK;
}
示例#4
0
int
tls_configure_ssl(struct tls *ctx, SSL_CTX *ssl_ctx)
{
	SSL_CTX_set_mode(ssl_ctx, SSL_MODE_ENABLE_PARTIAL_WRITE);
	SSL_CTX_set_mode(ssl_ctx, SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER);

	SSL_CTX_set_options(ssl_ctx, SSL_OP_NO_SSLv2);
	SSL_CTX_set_options(ssl_ctx, SSL_OP_NO_SSLv3);

	SSL_CTX_clear_options(ssl_ctx, SSL_OP_NO_TLSv1);
	SSL_CTX_clear_options(ssl_ctx, SSL_OP_NO_TLSv1_1);
	SSL_CTX_clear_options(ssl_ctx, SSL_OP_NO_TLSv1_2);

	if ((ctx->config->protocols & TLS_PROTOCOL_TLSv1_0) == 0)
		SSL_CTX_set_options(ssl_ctx, SSL_OP_NO_TLSv1);
	if ((ctx->config->protocols & TLS_PROTOCOL_TLSv1_1) == 0)
		SSL_CTX_set_options(ssl_ctx, SSL_OP_NO_TLSv1_1);
	if ((ctx->config->protocols & TLS_PROTOCOL_TLSv1_2) == 0)
		SSL_CTX_set_options(ssl_ctx, SSL_OP_NO_TLSv1_2);

	if (ctx->config->alpn != NULL) {
		if (SSL_CTX_set_alpn_protos(ssl_ctx, ctx->config->alpn,
		    ctx->config->alpn_len) != 0) {
			tls_set_errorx(ctx, "failed to set alpn");
			goto err;
		}
	}

	if (ctx->config->ciphers != NULL) {
		if (SSL_CTX_set_cipher_list(ssl_ctx,
		    ctx->config->ciphers) != 1) {
			tls_set_errorx(ctx, "failed to set ciphers");
			goto err;
		}
	}

	if (ctx->config->verify_time == 0) {
		X509_VERIFY_PARAM_set_flags(ssl_ctx->param,
		    X509_V_FLAG_NO_CHECK_TIME);
	}

	/* Disable any form of session caching by default */
	SSL_CTX_set_session_cache_mode(ssl_ctx, SSL_SESS_CACHE_OFF);
	SSL_CTX_set_options(ssl_ctx, SSL_OP_NO_TICKET);

	return (0);

 err:
	return (-1);
}
示例#5
0
/* Initializes an Nsock pool to create SSL connections. This sets an internal
 * SSL_CTX, which is like a template that sets options for all connections that
 * are made from it. The connections made from this context will use only secure
 * ciphers but no server certificate verification is done. Returns the SSL_CTX
 * so you can set your own options. */
nsock_ssl_ctx nsock_pool_ssl_init(nsock_pool ms_pool, int flags) {
  struct npool *ms = (struct npool *)ms_pool;
  char rndbuf[128];

  if (ms->sslctx == NULL)
    ms->sslctx = ssl_init_common();

  /* Get_random_bytes may or may not provide high-quality randomness. Add it to
   * the entropy pool without increasing the entropy estimate (third argument of
   * RAND_add is 0). We rely on OpenSSL's entropy gathering, called implicitly
   * by RAND_status, to give us what we need, or else bail out if it fails. */
  get_random_bytes(rndbuf, sizeof(rndbuf));
  RAND_add(rndbuf, sizeof(rndbuf), 0);

  if (!(flags & NSOCK_SSL_MAX_SPEED)) {
    if (!RAND_status())
      fatal("%s: Failed to seed OpenSSL PRNG"
            " (RAND_status returned false).", __func__);
  }

  /* SSL_OP_ALL sets bug-compatibility for pretty much everything.
   * SSL_OP_NO_SSLv2 disables the less-secure SSLv2 while allowing us to use the
   * SSLv2-compatible SSLv23_client_method. */
  SSL_CTX_set_verify(ms->sslctx, SSL_VERIFY_NONE, NULL);
  SSL_CTX_clear_options(ms->sslctx, SSL_OP_NO_SSLv2);
  SSL_CTX_set_options(ms->sslctx, flags & NSOCK_SSL_MAX_SPEED ?
                                  SSL_OP_ALL : SSL_OP_ALL|SSL_OP_NO_SSLv2);

  if (!SSL_CTX_set_cipher_list(ms->sslctx, flags & NSOCK_SSL_MAX_SPEED ?
                                           CIPHERS_FAST : CIPHERS_SECURE))
    fatal("Unable to set OpenSSL cipher list: %s",
          ERR_error_string(ERR_get_error(), NULL));

  return ms->sslctx;
}
示例#6
0
	void OnReload(Configuration::Conf *conf) override
	{
		Configuration::Block *config = conf->GetModule(this);

		this->certfile = config->Get<Anope::string>("cert", "data/anope.crt");
		this->keyfile = config->Get<Anope::string>("key", "data/anope.key");

		if (Anope::IsFile(this->certfile.c_str()))
		{
			if (!SSL_CTX_use_certificate_file(client_ctx, this->certfile.c_str(), SSL_FILETYPE_PEM) || !SSL_CTX_use_certificate_file(server_ctx, this->certfile.c_str(), SSL_FILETYPE_PEM))
				throw ConfigException("Error loading certificate");
			else
				Log(LOG_DEBUG) << "m_ssl_openssl: Successfully loaded certificate " << this->certfile;
		}
		else
			Log() << "Unable to open certificate " << this->certfile;

		if (Anope::IsFile(this->keyfile.c_str()))
		{
			if (!SSL_CTX_use_PrivateKey_file(client_ctx, this->keyfile.c_str(), SSL_FILETYPE_PEM) || !SSL_CTX_use_PrivateKey_file(server_ctx, this->keyfile.c_str(), SSL_FILETYPE_PEM))
				throw ConfigException("Error loading private key");
			else
				Log(LOG_DEBUG) << "m_ssl_openssl: Successfully loaded private key " << this->keyfile;
		}
		else
		{
			if (Anope::IsFile(this->certfile.c_str()))
				throw ConfigException("Error loading private key " + this->keyfile + " - file not found");
			else
				Log() << "Unable to open private key " << this->keyfile;
		}

		// Allow disabling SSLv3
		if (!config->Get<Anope::string>("sslv3").empty())
		{
			if (config->Get<bool>("sslv3"))
			{
				SSL_CTX_clear_options(client_ctx, SSL_OP_NO_SSLv3);
				SSL_CTX_clear_options(server_ctx, SSL_OP_NO_SSLv3);
			}
			else
			{
				SSL_CTX_set_options(client_ctx, SSL_OP_NO_SSLv3);
				SSL_CTX_set_options(server_ctx, SSL_OP_NO_SSLv3);
			}
		}
	}
示例#7
0
int amqp_ssl_socket_set_ssl_versions(amqp_socket_t *base,
                                     amqp_tls_version_t min,
                                     amqp_tls_version_t max) {
  struct amqp_ssl_socket_t *self;
  if (base->klass != &amqp_ssl_socket_class) {
    amqp_abort("<%p> is not of type amqp_ssl_socket_t", base);
  }
  self = (struct amqp_ssl_socket_t *)base;

  {
    long clear_options;
    long set_options = 0;
#if defined(SSL_OP_NO_TLSv1_2)
    amqp_tls_version_t max_supported = AMQP_TLSv1_2;
    clear_options = SSL_OP_NO_TLSv1 | SSL_OP_NO_TLSv1_1 | SSL_OP_NO_TLSv1_2;
#elif defined(SSL_OP_NO_TLSv1_1)
    amqp_tls_version_t max_supported = AMQP_TLSv1_1;
    clear_options = SSL_OP_NO_TLSv1 | SSL_OP_NO_TLSv1_1;
#elif defined(SSL_OP_NO_TLSv1)
    amqp_tls_version_t max_supported = AMQP_TLSv1;
    clear_options = SSL_OP_NO_TLSv1;
#else
# error "Need a version of OpenSSL that can support TLSv1 or greater."
#endif

    if (AMQP_TLSvLATEST == max) {
      max = max_supported;
    }
    if (AMQP_TLSvLATEST == min) {
      min = max_supported;
    }

    if (min > max) {
      return AMQP_STATUS_INVALID_PARAMETER;
    }

    if (max > max_supported || min > max_supported) {
      return AMQP_STATUS_UNSUPPORTED;
    }

    if (min > AMQP_TLSv1) {
      set_options |= SSL_OP_NO_TLSv1;
    }
#ifdef SSL_OP_NO_TLSv1_1
    if (min > AMQP_TLSv1_1 || max < AMQP_TLSv1_1) {
      set_options |= SSL_OP_NO_TLSv1_1;
    }
#endif
#ifdef SSL_OP_NO_TLSv1_2
    if (max < AMQP_TLSv1_2) {
      set_options |= SSL_OP_NO_TLSv1_2;
    }
#endif
    SSL_CTX_clear_options(self->ctx, clear_options);
    SSL_CTX_set_options(self->ctx, set_options);
  }

  return AMQP_STATUS_OK;
}
示例#8
0
/* OpenSSL < 0.9.8m does not have SSL_CTX_clear_options() */
long HsOpenSSL_SSL_CTX_clear_options(SSL_CTX* ctx, long options) {
#if defined(SSL_CTX_clear_options)
    return SSL_CTX_clear_options(ctx, options);
#else
    long tmp = SSL_CTX_get_options(ctx);
    return SSL_CTX_set_options(ctx, tmp & ~options);
#endif
}
示例#9
0
文件: tls.c 项目: markokr/libusual
int
tls_configure_ssl(struct tls *ctx)
{
	SSL_CTX_set_mode(ctx->ssl_ctx, SSL_MODE_ENABLE_PARTIAL_WRITE);
	SSL_CTX_set_mode(ctx->ssl_ctx, SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER);
	SSL_CTX_set_mode(ctx->ssl_ctx, SSL_MODE_RELEASE_BUFFERS);

	SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_SSLv2);
	SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_SSLv3);

	SSL_CTX_clear_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1);
	SSL_CTX_clear_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1_1);
	SSL_CTX_clear_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1_2);

	if ((ctx->config->protocols & TLS_PROTOCOL_TLSv1_0) == 0)
		SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1);
	if ((ctx->config->protocols & TLS_PROTOCOL_TLSv1_1) == 0)
		SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1_1);
	if ((ctx->config->protocols & TLS_PROTOCOL_TLSv1_2) == 0)
		SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1_2);

	if (ctx->config->ciphers != NULL) {
		if (SSL_CTX_set_cipher_list(ctx->ssl_ctx,
		    ctx->config->ciphers) != 1) {
			tls_set_errorx(ctx, "failed to set ciphers");
			goto err;
		}
	}

	SSL_CTX_set_info_callback(ctx->ssl_ctx, tls_info_callback);

#ifdef X509_V_FLAG_NO_CHECK_TIME
	if (ctx->config->verify_time == 0) {
		X509_VERIFY_PARAM *vfp = SSL_CTX_get0_param(ctx->ssl_ctx);
		X509_VERIFY_PARAM_set_flags(vfp, X509_V_FLAG_NO_CHECK_TIME);
	}
#endif

	return (0);

 err:
	return (-1);
}
示例#10
0
文件: ssl.c 项目: witchu/lua-openssl
static int openssl_ssl_ctx_options(lua_State*L)
{
  SSL_CTX* ctx = CHECK_OBJECT(1, SSL_CTX, "openssl.ssl_ctx");
  long options = 0;
  int ret;
  int i;
  if (!lua_isnoneornil(L, 2))
  {
    int top = lua_gettop(L);
    int clear = lua_isboolean(L, 2) ? lua_toboolean(L, 2) : 0;
    i = lua_isboolean(L, 2) ? 3 : 2;
    for (; i <= top; i++)
    {
      if (lua_isnumber(L, i))
        options |= (long)luaL_checkinteger(L, i);
      else
      {
        const char* s = luaL_checkstring(L, i);
        int j;
        for (j = 0; ssl_options[j].name; j++)
        {
          LuaL_Enum e = ssl_options[j];
          if (strcasecmp(s, e.name))
          {
            options |= e.val;
            break;
          }
        }
      }
    }


    if (clear != 0)
      options = SSL_CTX_clear_options(ctx, options);
    else
      options = SSL_CTX_set_options(ctx, options);
  }
  else
    options = SSL_CTX_get_options(ctx);

  lua_newtable(L);
  ret = 0;
  for (i = 0; ssl_options[i].name; i++)
  {
    LuaL_Enum e = ssl_options[i];
    if (options && e.val)
    {
      lua_pushstring(L, e.name);
      ret++;
      lua_rawseti(L, -2, ret);
    }
  }
  return 1;
}
示例#11
0
文件: tls.c 项目: jedisct1/pure-ftpd
static void tls_init_options(void)
{
    static int passes;

# ifdef SSL_OP_CIPHER_SERVER_PREFERENCE
    SSL_CTX_set_options(tls_ctx, SSL_OP_CIPHER_SERVER_PREFERENCE);
# endif
# ifdef SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
    SSL_CTX_set_options(tls_ctx, SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION);
# endif
    SSL_CTX_set_options(tls_ctx, SSL_OP_NO_SSLv2);
    SSL_CTX_set_options(tls_ctx, SSL_OP_NO_SSLv3);
# ifdef SSL_OP_NO_TLSv1
    SSL_CTX_set_options(tls_ctx, SSL_OP_NO_TLSv1);
# endif
# ifdef SSL_OP_NO_TLSv1_1
    SSL_CTX_set_options(tls_ctx, SSL_OP_NO_TLSv1_1);
# endif
# ifdef SSL_OP_NO_TLSv1_2
    SSL_CTX_clear_options(tls_ctx, SSL_OP_NO_TLSv1_2);
# endif
# ifdef SSL_OP_NO_TLSv1_3
    SSL_CTX_clear_options(tls_ctx, SSL_OP_NO_TLSv1_3);
# endif
    if (tlsciphersuite != NULL) {
        if (SSL_CTX_set_cipher_list(tls_ctx, tlsciphersuite) != 1) {
            logfile(LOG_ERR, MSG_TLS_CIPHER_FAILED, tlsciphersuite);
            _EXIT(EXIT_FAILURE);
        }
    }
    SSL_CTX_set_info_callback(tls_ctx, ssl_info_cb);
    if (passes == 0) {
        SSL_CTX_set_tlsext_servername_callback(tls_ctx, ssl_servername_cb);
        passes++;
    }
    SSL_CTX_set_verify_depth(tls_ctx, MAX_CERTIFICATE_DEPTH);
}
示例#12
0
long SSL_CTX_clear_options_shim(SSL_CTX *ctx, long options) {
    return SSL_CTX_clear_options(ctx, options);
}
示例#13
0
boost::asio::ssl::context ssl_options_t::create_context() const
{
  boost::asio::ssl::context ssl_context{boost::asio::ssl::context::tlsv12};
  if (!bool(*this))
    return ssl_context;

  // only allow tls v1.2 and up
  ssl_context.set_options(boost::asio::ssl::context::default_workarounds);
  ssl_context.set_options(boost::asio::ssl::context::no_sslv2);
  ssl_context.set_options(boost::asio::ssl::context::no_sslv3);
  ssl_context.set_options(boost::asio::ssl::context::no_tlsv1);
  ssl_context.set_options(boost::asio::ssl::context::no_tlsv1_1);

  // only allow a select handful of tls v1.3 and v1.2 ciphers to be used
  SSL_CTX_set_cipher_list(ssl_context.native_handle(), "ECDHE-ECDSA-CHACHA20-POLY1305-SHA256:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256");

  // set options on the SSL context for added security
  SSL_CTX *ctx = ssl_context.native_handle();
  CHECK_AND_ASSERT_THROW_MES(ctx, "Failed to get SSL context");
  SSL_CTX_clear_options(ctx, SSL_OP_LEGACY_SERVER_CONNECT); // SSL_CTX_SET_OPTIONS(3)
  SSL_CTX_set_session_cache_mode(ctx, SSL_SESS_CACHE_OFF); // https://stackoverflow.com/questions/22378442
#ifdef SSL_OP_NO_TICKET
  SSL_CTX_set_options(ctx, SSL_OP_NO_TICKET); // https://stackoverflow.com/questions/22378442
#endif
#ifdef SSL_OP_NO_RENEGOTIATION
  SSL_CTX_set_options(ctx, SSL_OP_NO_RENEGOTIATION);
#endif
#ifdef SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
  SSL_CTX_set_options(ctx, SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION);
#endif
#ifdef SSL_OP_NO_COMPRESSION
  SSL_CTX_set_options(ctx, SSL_OP_NO_COMPRESSION);
#endif
#ifdef SSL_OP_CIPHER_SERVER_PREFERENCE
  SSL_CTX_set_options(ctx, SSL_OP_CIPHER_SERVER_PREFERENCE);
#endif
  SSL_CTX_set_ecdh_auto(ctx, 1);

  switch (verification)
  {
    case ssl_verification_t::system_ca:
      ssl_context.set_default_verify_paths();
      break;
    case ssl_verification_t::user_certificates:
      ssl_context.set_verify_depth(0);
      /* fallthrough */
    case ssl_verification_t::user_ca:
      if (!ca_path.empty())
      {
        const boost::system::error_code err = load_ca_file(ssl_context, ca_path);
        if (err)
          throw boost::system::system_error{err, "Failed to load user CA file at " + ca_path};
      }
      break;
    default:
      break;
  }

  CHECK_AND_ASSERT_THROW_MES(auth.private_key_path.empty() == auth.certificate_path.empty(), "private key and certificate must be either both given or both empty");
  if (auth.private_key_path.empty())
  {
    EVP_PKEY *pkey;
    X509 *cert;
    bool ok = false;

#ifdef USE_EXTRA_EC_CERT
    CHECK_AND_ASSERT_THROW_MES(create_ec_ssl_certificate(pkey, cert, NID_secp256k1), "Failed to create certificate");
    CHECK_AND_ASSERT_THROW_MES(SSL_CTX_use_certificate(ctx, cert), "Failed to use generated certificate");
    if (!SSL_CTX_use_PrivateKey(ctx, pkey))
      MERROR("Failed to use generated EC private key for " << NID_secp256k1);
    else
      ok = true;
    X509_free(cert);
    EVP_PKEY_free(pkey);
#endif

    CHECK_AND_ASSERT_THROW_MES(create_rsa_ssl_certificate(pkey, cert), "Failed to create certificate");
    CHECK_AND_ASSERT_THROW_MES(SSL_CTX_use_certificate(ctx, cert), "Failed to use generated certificate");
    if (!SSL_CTX_use_PrivateKey(ctx, pkey))
      MERROR("Failed to use generated RSA private key for RSA");
    else
      ok = true;
    X509_free(cert);
    EVP_PKEY_free(pkey);

    CHECK_AND_ASSERT_THROW_MES(ok, "Failed to use any generated certificate");
  }
  else
    auth.use_ssl_certificate(ssl_context);

  return ssl_context;
}
示例#14
0
/*
    Open the SSL module
 */
PUBLIC int sslOpen()
{
    RandBuf     randBuf;
    X509_STORE  *store;
    uchar       resume[16];
    char        *ciphers;

    trace(7, "Initializing SSL");

    randBuf.now = time(0);
    randBuf.pid = getpid();
    RAND_seed((void*) &randBuf, sizeof(randBuf));
#if ME_UNIX_LIKE
    trace(6, "OpenSsl: Before calling RAND_load_file");
    RAND_load_file("/dev/urandom", 256);
    trace(6, "OpenSsl: After calling RAND_load_file");
#endif

    CRYPTO_malloc_init();
#if !ME_WIN_LIKE
    OpenSSL_add_all_algorithms();
#endif
    SSL_library_init();
    SSL_load_error_strings();
    SSLeay_add_ssl_algorithms();

    if ((sslctx = SSL_CTX_new(SSLv23_server_method())) == 0) {
        error("Unable to create SSL context");
        return -1;
    }

    /*
          Set the server certificate and key files
     */
    if (*ME_GOAHEAD_SSL_KEY && sslSetKeyFile(ME_GOAHEAD_SSL_KEY) < 0) {
        sslClose();
        return -1;
    }
    if (*ME_GOAHEAD_SSL_CERTIFICATE && sslSetCertFile(ME_GOAHEAD_SSL_CERTIFICATE) < 0) {
        sslClose();
        return -1;
    }

    if (ME_GOAHEAD_SSL_VERIFY_PEER) {
        SSL_CTX_set_verify(sslctx, SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT, verifyClientCertificate);
        SSL_CTX_set_verify_depth(sslctx, VERIFY_DEPTH);
    } else {
        SSL_CTX_set_verify(sslctx, SSL_VERIFY_NONE, verifyClientCertificate);
    }
    /*
          Set the client certificate verification locations
     */
    if (ME_GOAHEAD_SSL_AUTHORITY && *ME_GOAHEAD_SSL_AUTHORITY) {
        if ((!SSL_CTX_load_verify_locations(sslctx, ME_GOAHEAD_SSL_AUTHORITY, NULL)) ||
                (!SSL_CTX_set_default_verify_paths(sslctx))) {
            error("Unable to read cert verification locations");
            sslClose();
            return -1;
        }
        /*
            Define the list of CA certificates to send to the client before they send their client
            certificate for validation
         */
        SSL_CTX_set_client_CA_list(sslctx, SSL_load_client_CA_file(ME_GOAHEAD_SSL_AUTHORITY));
    }
    if (ME_GOAHEAD_SSL_REVOKE && *ME_GOAHEAD_SSL_REVOKE) {
        store = SSL_CTX_get_cert_store(sslctx);
        if (!X509_STORE_load_locations(store, ME_GOAHEAD_SSL_REVOKE, 0)) {
            error("Cannot load certificate revoke list: %s", ME_GOAHEAD_SSL_REVOKE);
            sslClose();
            return -1;
        }
    }

    /*
        Configure DH parameters
     */
    dhKey = getDhKey();
    SSL_CTX_set_tmp_dh_callback(sslctx, dhcallback);

    /*
        Configure cipher suite
     */
    if (ME_GOAHEAD_SSL_CIPHERS && *ME_GOAHEAD_SSL_CIPHERS) {
        ciphers = ME_GOAHEAD_SSL_CIPHERS;
    } else {
        ciphers = OPENSSL_DEFAULT_CIPHERS;
    }
    ciphers = mapCipherNames(ciphers);
    trace(5, "Using OpenSSL ciphers: %s", ciphers);
    if (SSL_CTX_set_cipher_list(sslctx, ciphers) != 1) {
        error("Unable to set cipher list \"%s\"", ciphers);
        sslClose();
        wfree(ciphers);
        return -1;
    }
    wfree(ciphers);

    /*
        Define default OpenSSL options
     */
    SSL_CTX_set_options(sslctx, SSL_OP_ALL);

    /*
        Ensure we generate a new private key for each connection
     */
    SSL_CTX_set_options(sslctx, SSL_OP_SINGLE_DH_USE);

    /*
        Define a session reuse context
     */
    RAND_bytes(resume, sizeof(resume));
    SSL_CTX_set_session_id_context(sslctx, resume, sizeof(resume));

    /*
        Elliptic Curve initialization
     */
#if SSL_OP_SINGLE_ECDH_USE
#ifdef SSL_CTX_set_ecdh_auto
    SSL_CTX_set_ecdh_auto(sslctx, 1);
#else
    {
        EC_KEY  *ecdh;
        cchar   *name;
        int      nid;

        name = ME_GOAHEAD_SSL_CURVE;
        if ((nid = OBJ_sn2nid(name)) == 0) {
            error("Unknown curve name \"%s\"", name);
            sslClose();
            return -1;
        }
        if ((ecdh = EC_KEY_new_by_curve_name(nid)) == 0) {
            error("Unable to create curve \"%s\"", name);
            sslClose();
            return -1;
        }
        SSL_CTX_set_options(sslctx, SSL_OP_SINGLE_ECDH_USE);
        SSL_CTX_set_tmp_ecdh(sslctx, ecdh);
        EC_KEY_free(ecdh);
    }
#endif
#endif

    SSL_CTX_set_mode(sslctx, SSL_MODE_ENABLE_PARTIAL_WRITE | SSL_MODE_AUTO_RETRY | SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER);
#ifdef SSL_OP_MSIE_SSLV2_RSA_PADDING
    SSL_CTX_set_options(sslctx, SSL_OP_MSIE_SSLV2_RSA_PADDING);
#endif
#ifdef SSL_MODE_RELEASE_BUFFERS
    SSL_CTX_set_mode(sslctx, SSL_MODE_RELEASE_BUFFERS);
#endif
#ifdef SSL_OP_CIPHER_SERVER_PREFERENCE
    SSL_CTX_set_mode(sslctx, SSL_OP_CIPHER_SERVER_PREFERENCE);
#endif

    /*
        Select the required protocols
        Disable both SSLv2 and SSLv3 by default - they are insecure
     */
    SSL_CTX_set_options(sslctx, SSL_OP_NO_SSLv2);
    SSL_CTX_set_options(sslctx, SSL_OP_NO_SSLv3);

#if defined(SSL_OP_NO_TLSv1) && ME_GOAHEAD_SSL_NO_V1
    SSL_CTX_set_options(sslctx, SSL_OP_NO_TLSv1);
#endif
#if defined(SSL_OP_NO_TLSv1_1) && ME_GOAHEAD_SSL_NO_V1_1
    SSL_CTX_set_options(sslctx, SSL_OP_NO_TLSv1_1);
#endif
#if defined(SSL_OP_NO_TLSv1_2) && ME_GOAHEAD_SSL_NO_V1_2
    SSL_CTX_set_options(sslctx, SSL_OP_NO_TLSv1_2);
#endif


#if defined(SSL_OP_NO_TICKET)
    /*
        Ticket based session reuse is enabled by default
     */
#if defined(ME_GOAHEAD_SSL_TICKET)
    if (ME_GOAHEAD_SSL_TICKET) {
        SSL_CTX_clear_options(sslctx, SSL_OP_NO_TICKET);
    } else {
        SSL_CTX_set_options(sslctx, SSL_OP_NO_TICKET);
    }
#else
    SSL_CTX_clear_options(sslctx, SSL_OP_NO_TICKET);
#endif
#endif

#if defined(SSL_OP_NO_COMPRESSION)
    /*
        CRIME attack targets compression
     */
    SSL_CTX_clear_options(sslctx, SSL_OP_NO_COMPRESSION);
#endif

#if defined(SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS)
    /*
        Disables a countermeasure against a SSL 3.0/TLS 1.0 protocol vulnerability affecting CBC ciphers.
        Defaults to true.
     */
#if defined(ME_GOAHEAD_SSL_EMPTY_FRAGMENTS)
    if (ME_GOAHEAD_SSL_EMPTY_FRAGMENTS) {
        /* SSL_OP_ALL disables empty fragments. Only needed for ancient browsers like IE-6 on SSL-3.0/TLS-1.0 */
        SSL_CTX_clear_options(sslctx, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS);
    } else {
        SSL_CTX_set_options(sslctx, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS);
    }
#else
    SSL_CTX_set_options(sslctx, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS);
#endif
#endif

#if defined(ME_GOAHEAD_SSL_CACHE)
    /*
        Set the number of sessions supported. Default in OpenSSL is 20K.
     */
    SSL_CTX_sess_set_cache_size(sslctx, ME_GOAHEAD_SSL_CACHE);
#else
    SSL_CTX_sess_set_cache_size(sslctx, 256);
#endif

    return 0;
}
示例#15
0
LWS_VISIBLE int
lws_context_init_server_ssl(struct lws_context_creation_info *info,
			    struct lws_vhost *vhost)
{
	struct lws_context *context = vhost->context;
	struct lws wsi;
	unsigned long error;
	int n;

	if (!lws_check_opt(info->options, LWS_SERVER_OPTION_DO_SSL_GLOBAL_INIT)) {
		vhost->use_ssl = 0;
		return 0;
	}

	/*
	 * If he is giving a cert filepath, take it as a sign he wants to use
	 * it on this vhost.  User code can leave the cert filepath NULL and
	 * set the LWS_SERVER_OPTION_CREATE_VHOST_SSL_CTX option itself, in
	 * which case he's expected to set up the cert himself at
	 * LWS_CALLBACK_OPENSSL_LOAD_EXTRA_SERVER_VERIFY_CERTS, which
	 * provides the vhost SSL_CTX * in the user parameter.
	 */
	if (info->ssl_cert_filepath)
		info->options |= LWS_SERVER_OPTION_CREATE_VHOST_SSL_CTX;

	if (info->port != CONTEXT_PORT_NO_LISTEN) {

		vhost->use_ssl = lws_check_opt(info->options,
					LWS_SERVER_OPTION_CREATE_VHOST_SSL_CTX);

		if (vhost->use_ssl && info->ssl_cipher_list)
			lwsl_notice(" SSL ciphers: '%s'\n", info->ssl_cipher_list);

		if (vhost->use_ssl)
			lwsl_notice(" Using SSL mode\n");
		else
			lwsl_notice(" Using non-SSL mode\n");
	}

	/*
	 * give him a fake wsi with context + vhost set, so he can use
	 * lws_get_context() in the callback
	 */
	memset(&wsi, 0, sizeof(wsi));
	wsi.vhost = vhost;
	wsi.context = context;

	(void)n;
	(void)error;

	/*
	 * Firefox insists on SSLv23 not SSLv3
	 * Konq disables SSLv2 by default now, SSLv23 works
	 *
	 * SSLv23_server_method() is the openssl method for "allow all TLS
	 * versions", compared to e.g. TLSv1_2_server_method() which only allows
	 * tlsv1.2. Unwanted versions must be disabled using SSL_CTX_set_options()
	 */
#if !defined(LWS_WITH_MBEDTLS)
	{
		SSL_METHOD *method;

		method = (SSL_METHOD *)SSLv23_server_method();
		if (!method) {
			error = ERR_get_error();
			lwsl_err("problem creating ssl method %lu: %s\n",
					error, ERR_error_string(error,
					      (char *)context->pt[0].serv_buf));
			return 1;
		}
		vhost->ssl_ctx = SSL_CTX_new(method);	/* create context */
		if (!vhost->ssl_ctx) {
			error = ERR_get_error();
			lwsl_err("problem creating ssl context %lu: %s\n",
					error, ERR_error_string(error,
					      (char *)context->pt[0].serv_buf));
			return 1;
		}
	}
#else
	{
		const SSL_METHOD *method = TLSv1_2_server_method();

		vhost->ssl_ctx = SSL_CTX_new(method);	/* create context */
		if (!vhost->ssl_ctx) {
			lwsl_err("problem creating ssl context\n");
			return 1;
		}

	}
#endif
#if !defined(LWS_WITH_MBEDTLS)

	/* associate the lws context with the SSL_CTX */

	SSL_CTX_set_ex_data(vhost->ssl_ctx,
			openssl_SSL_CTX_private_data_index, (char *)vhost->context);
	/* Disable SSLv2 and SSLv3 */
	SSL_CTX_set_options(vhost->ssl_ctx, SSL_OP_NO_SSLv2 | SSL_OP_NO_SSLv3);
#ifdef SSL_OP_NO_COMPRESSION
	SSL_CTX_set_options(vhost->ssl_ctx, SSL_OP_NO_COMPRESSION);
#endif
	SSL_CTX_set_options(vhost->ssl_ctx, SSL_OP_SINGLE_DH_USE);
	SSL_CTX_set_options(vhost->ssl_ctx, SSL_OP_CIPHER_SERVER_PREFERENCE);

	if (info->ssl_cipher_list)
		SSL_CTX_set_cipher_list(vhost->ssl_ctx,
						info->ssl_cipher_list);
#endif

	/* as a server, are we requiring clients to identify themselves? */

	if (lws_check_opt(info->options,
			  LWS_SERVER_OPTION_REQUIRE_VALID_OPENSSL_CLIENT_CERT)) {
		int verify_options = SSL_VERIFY_PEER;

		if (!lws_check_opt(info->options,
				   LWS_SERVER_OPTION_PEER_CERT_NOT_REQUIRED))
			verify_options |= SSL_VERIFY_FAIL_IF_NO_PEER_CERT;

#if !defined(LWS_WITH_MBEDTLS)
		SSL_CTX_set_session_id_context(vhost->ssl_ctx,
				(unsigned char *)context, sizeof(void *));

		/* absolutely require the client cert */

		SSL_CTX_set_verify(vhost->ssl_ctx,
		       verify_options, OpenSSL_verify_callback);
#endif
	}

#if !defined(LWS_WITH_MBEDTLS) && !defined(OPENSSL_NO_TLSEXT)
	SSL_CTX_set_tlsext_servername_callback(vhost->ssl_ctx,
					       lws_ssl_server_name_cb);
	SSL_CTX_set_tlsext_servername_arg(vhost->ssl_ctx, context);
#endif

	/*
	 * give user code a chance to load certs into the server
	 * allowing it to verify incoming client certs
	 */
#if !defined(LWS_WITH_MBEDTLS)
	if (info->ssl_ca_filepath &&
	    !SSL_CTX_load_verify_locations(vhost->ssl_ctx,
					   info->ssl_ca_filepath, NULL)) {
		lwsl_err("%s: SSL_CTX_load_verify_locations unhappy\n", __func__);
	}
#endif
	if (vhost->use_ssl) {
		if (lws_context_ssl_init_ecdh_curve(info, vhost))
			return -1;

		vhost->protocols[0].callback(&wsi,
			LWS_CALLBACK_OPENSSL_LOAD_EXTRA_SERVER_VERIFY_CERTS,
			vhost->ssl_ctx, NULL, 0);
	}

	if (lws_check_opt(info->options, LWS_SERVER_OPTION_ALLOW_NON_SSL_ON_SSL_PORT))
		/* Normally SSL listener rejects non-ssl, optionally allow */
		vhost->allow_non_ssl_on_ssl_port = 1;

	if (info->ssl_options_set)
		SSL_CTX_set_options(vhost->ssl_ctx, info->ssl_options_set);

/* SSL_clear_options introduced in 0.9.8m */
#if !defined(LWS_WITH_MBEDTLS)
#if (OPENSSL_VERSION_NUMBER >= 0x009080df) && !defined(USE_WOLFSSL)
	if (info->ssl_options_clear)
		SSL_CTX_clear_options(vhost->ssl_ctx, info->ssl_options_clear);
#endif
#endif

	lwsl_info(" SSL options 0x%lX\n", SSL_CTX_get_options(vhost->ssl_ctx));

	if (vhost->use_ssl && info->ssl_cert_filepath) {
		/*
		 * The user code can choose to either pass the cert and
		 * key filepaths using the info members like this, or it can
		 * leave them NULL; force the vhost SSL_CTX init using the info
		 * options flag LWS_SERVER_OPTION_CREATE_VHOST_SSL_CTX; and
		 * set up the cert himself using the user callback
		 * LWS_CALLBACK_OPENSSL_LOAD_EXTRA_SERVER_VERIFY_CERTS, which
		 * happened just above and has the vhost SSL_CTX * in the user
		 * parameter.
		 */
#if !defined(LWS_WITH_MBEDTLS)
		/* set the local certificate from CertFile */
		n = SSL_CTX_use_certificate_chain_file(vhost->ssl_ctx,
					info->ssl_cert_filepath);
		if (n != 1) {
			error = ERR_get_error();
			lwsl_err("problem getting cert '%s' %lu: %s\n",
				info->ssl_cert_filepath,
				error,
				ERR_error_string(error,
					      (char *)context->pt[0].serv_buf));
			return 1;
		}
		lws_ssl_bind_passphrase(vhost->ssl_ctx, info);
#else
		uint8_t *p;
		lws_filepos_t flen;
		int err;

		if (alloc_pem_to_der_file(vhost->context, info->ssl_cert_filepath, &p,
				                &flen)) {
			lwsl_err("couldn't find cert file %s\n",
				 info->ssl_cert_filepath);

			return 1;
		}
		err = SSL_CTX_use_certificate_ASN1(vhost->ssl_ctx, flen, p);
		if (!err) {
			lwsl_err("Problem loading cert\n");
			return 1;
		}
#if !defined(LWS_WITH_ESP32)
		free(p);
		p = NULL;
#endif

		if (info->ssl_private_key_filepath) {
			if (alloc_pem_to_der_file(vhost->context,
				       info->ssl_private_key_filepath, &p, &flen)) {
				lwsl_err("couldn't find cert file %s\n",
					 info->ssl_cert_filepath);

				return 1;
			}
			err = SSL_CTX_use_PrivateKey_ASN1(0, vhost->ssl_ctx, p, flen);
			if (!err) {
				lwsl_err("Problem loading key\n");

				return 1;
			}
		}

#if !defined(LWS_WITH_ESP32)
		free(p);
		p = NULL;
#endif
#endif
		if (info->ssl_private_key_filepath != NULL) {
#if !defined(LWS_WITH_MBEDTLS)
			/* set the private key from KeyFile */
			if (SSL_CTX_use_PrivateKey_file(vhost->ssl_ctx,
				     info->ssl_private_key_filepath,
						       SSL_FILETYPE_PEM) != 1) {
				error = ERR_get_error();
				lwsl_err("ssl problem getting key '%s' %lu: %s\n",
					 info->ssl_private_key_filepath, error,
					 ERR_error_string(error,
					      (char *)context->pt[0].serv_buf));
				return 1;
			}
#endif
		} else
			if (vhost->protocols[0].callback(&wsi,
				LWS_CALLBACK_OPENSSL_CONTEXT_REQUIRES_PRIVATE_KEY,
				vhost->ssl_ctx, NULL, 0)) {
				lwsl_err("ssl private key not set\n");

				return 1;
			}
#if !defined(LWS_WITH_MBEDTLS)
		/* verify private key */
		if (!SSL_CTX_check_private_key(vhost->ssl_ctx)) {
			lwsl_err("Private SSL key doesn't match cert\n");
			return 1;
		}
#endif
	}
	if (vhost->use_ssl) {
		if (lws_context_ssl_init_ecdh(vhost))
			return 1;

		/*
		 * SSL is happy and has a cert it's content with
		 * If we're supporting HTTP2, initialize that
		 */
		lws_context_init_http2_ssl(vhost);
	}

	return 0;
}
示例#16
0
int MAIN(int argc, char **argv)
	{
	int off=0, clr = 0;
	SSL *con=NULL,*con2=NULL;
	X509_STORE *store = NULL;
	int s,k,width,state=0;
	char *cbuf=NULL,*sbuf=NULL,*mbuf=NULL;
	int cbuf_len,cbuf_off;
	int sbuf_len,sbuf_off;
	fd_set readfds,writefds;
	short port=PORT;
	int full_log=1;
	char *host=SSL_HOST_NAME;
	char *cert_file=NULL,*key_file=NULL;
	int cert_format = FORMAT_PEM, key_format = FORMAT_PEM;
	char *passarg = NULL, *pass = NULL;
	X509 *cert = NULL;
	EVP_PKEY *key = NULL;
	char *CApath=NULL,*CAfile=NULL,*cipher=NULL;
	int reconnect=0,badop=0,verify=SSL_VERIFY_NONE,bugs=0;
	int cutthrough=0;
	int crlf=0;
	int write_tty,read_tty,write_ssl,read_ssl,tty_on,ssl_pending;
	SSL_CTX *ctx=NULL;
	int ret=1,in_init=1,i,nbio_test=0;
	int starttls_proto = PROTO_OFF;
	int prexit = 0, vflags = 0;
	SSL_METHOD *meth=NULL;
#ifdef sock_type
#undef sock_type
#endif
	int sock_type=SOCK_STREAM;
	BIO *sbio;
	char *inrand=NULL;
	int mbuf_len=0;
	struct timeval timeout, *timeoutp;
#ifndef OPENSSL_NO_ENGINE
	char *engine_id=NULL;
	char *ssl_client_engine_id=NULL;
	ENGINE *ssl_client_engine=NULL;
#endif
	ENGINE *e=NULL;
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
	struct timeval tv;
#endif

#ifndef OPENSSL_NO_TLSEXT
	char *servername = NULL; 
        tlsextctx tlsextcbp = 
        {NULL,0};
#endif
	char *sess_in = NULL;
	char *sess_out = NULL;
	struct sockaddr peer;
	int peerlen = sizeof(peer);
	int enable_timeouts = 0 ;
	long socket_mtu = 0;
#ifndef OPENSSL_NO_JPAKE
	char *jpake_secret = NULL;
#endif

#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
	meth=SSLv23_client_method();
#elif !defined(OPENSSL_NO_SSL3)
	meth=SSLv3_client_method();
#elif !defined(OPENSSL_NO_SSL2)
	meth=SSLv2_client_method();
#endif

	apps_startup();
	c_Pause=0;
	c_quiet=0;
	c_ign_eof=0;
	c_debug=0;
	c_msg=0;
	c_showcerts=0;

	if (bio_err == NULL)
		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);

	if (!load_config(bio_err, NULL))
		goto end;

	if (	((cbuf=OPENSSL_malloc(BUFSIZZ)) == NULL) ||
		((sbuf=OPENSSL_malloc(BUFSIZZ)) == NULL) ||
		((mbuf=OPENSSL_malloc(BUFSIZZ)) == NULL))
		{
		BIO_printf(bio_err,"out of memory\n");
		goto end;
		}

	verify_depth=0;
	verify_error=X509_V_OK;
#ifdef FIONBIO
	c_nbio=0;
#endif

	argc--;
	argv++;
	while (argc >= 1)
		{
		if	(strcmp(*argv,"-host") == 0)
			{
			if (--argc < 1) goto bad;
			host= *(++argv);
			}
		else if	(strcmp(*argv,"-port") == 0)
			{
			if (--argc < 1) goto bad;
			port=atoi(*(++argv));
			if (port == 0) goto bad;
			}
		else if (strcmp(*argv,"-connect") == 0)
			{
			if (--argc < 1) goto bad;
			if (!extract_host_port(*(++argv),&host,NULL,&port))
				goto bad;
			}
		else if	(strcmp(*argv,"-verify") == 0)
			{
			verify=SSL_VERIFY_PEER;
			if (--argc < 1) goto bad;
			verify_depth=atoi(*(++argv));
			BIO_printf(bio_err,"verify depth is %d\n",verify_depth);
			}
		else if	(strcmp(*argv,"-cert") == 0)
			{
			if (--argc < 1) goto bad;
			cert_file= *(++argv);
			}
		else if	(strcmp(*argv,"-sess_out") == 0)
			{
			if (--argc < 1) goto bad;
			sess_out = *(++argv);
			}
		else if	(strcmp(*argv,"-sess_in") == 0)
			{
			if (--argc < 1) goto bad;
			sess_in = *(++argv);
			}
		else if	(strcmp(*argv,"-certform") == 0)
			{
			if (--argc < 1) goto bad;
			cert_format = str2fmt(*(++argv));
			}
		else if	(strcmp(*argv,"-crl_check") == 0)
			vflags |= X509_V_FLAG_CRL_CHECK;
		else if	(strcmp(*argv,"-crl_check_all") == 0)
			vflags |= X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL;
		else if	(strcmp(*argv,"-prexit") == 0)
			prexit=1;
		else if	(strcmp(*argv,"-crlf") == 0)
			crlf=1;
		else if	(strcmp(*argv,"-quiet") == 0)
			{
			c_quiet=1;
			c_ign_eof=1;
			}
		else if	(strcmp(*argv,"-ign_eof") == 0)
			c_ign_eof=1;
		else if	(strcmp(*argv,"-no_ign_eof") == 0)
			c_ign_eof=0;
		else if	(strcmp(*argv,"-pause") == 0)
			c_Pause=1;
		else if	(strcmp(*argv,"-debug") == 0)
			c_debug=1;
#ifndef OPENSSL_NO_TLSEXT
		else if	(strcmp(*argv,"-tlsextdebug") == 0)
			c_tlsextdebug=1;
		else if	(strcmp(*argv,"-status") == 0)
			c_status_req=1;
#endif
#ifdef WATT32
		else if (strcmp(*argv,"-wdebug") == 0)
			dbug_init();
#endif
		else if	(strcmp(*argv,"-msg") == 0)
			c_msg=1;
		else if	(strcmp(*argv,"-showcerts") == 0)
			c_showcerts=1;
		else if	(strcmp(*argv,"-nbio_test") == 0)
			nbio_test=1;
		else if	(strcmp(*argv,"-state") == 0)
			state=1;
#ifndef OPENSSL_NO_SSL2
		else if	(strcmp(*argv,"-ssl2") == 0)
			meth=SSLv2_client_method();
#endif
#ifndef OPENSSL_NO_SSL3
		else if	(strcmp(*argv,"-ssl3") == 0)
			meth=SSLv3_client_method();
#endif
#ifndef OPENSSL_NO_TLS1
		else if	(strcmp(*argv,"-tls1") == 0)
			meth=TLSv1_client_method();
#endif
#ifndef OPENSSL_NO_DTLS1
		else if	(strcmp(*argv,"-dtls1") == 0)
			{
			meth=DTLSv1_client_method();
			sock_type=SOCK_DGRAM;
			}
		else if (strcmp(*argv,"-timeout") == 0)
			enable_timeouts=1;
		else if (strcmp(*argv,"-mtu") == 0)
			{
			if (--argc < 1) goto bad;
			socket_mtu = atol(*(++argv));
			}
#endif
		else if (strcmp(*argv,"-bugs") == 0)
			bugs=1;
		else if	(strcmp(*argv,"-keyform") == 0)
			{
			if (--argc < 1) goto bad;
			key_format = str2fmt(*(++argv));
			}
		else if	(strcmp(*argv,"-pass") == 0)
			{
			if (--argc < 1) goto bad;
			passarg = *(++argv);
			}
		else if	(strcmp(*argv,"-key") == 0)
			{
			if (--argc < 1) goto bad;
			key_file= *(++argv);
			}
		else if	(strcmp(*argv,"-reconnect") == 0)
			{
			reconnect=5;
			}
		else if	(strcmp(*argv,"-CApath") == 0)
			{
			if (--argc < 1) goto bad;
			CApath= *(++argv);
			}
		else if	(strcmp(*argv,"-CAfile") == 0)
			{
			if (--argc < 1) goto bad;
			CAfile= *(++argv);
			}
		else if (strcmp(*argv,"-no_tls1") == 0)
			off|=SSL_OP_NO_TLSv1;
		else if (strcmp(*argv,"-no_ssl3") == 0)
			off|=SSL_OP_NO_SSLv3;
		else if (strcmp(*argv,"-no_ssl2") == 0)
			off|=SSL_OP_NO_SSLv2;
#ifndef OPENSSL_NO_TLSEXT
		else if	(strcmp(*argv,"-no_ticket") == 0)
			{ off|=SSL_OP_NO_TICKET; }
#endif
		else if (strcmp(*argv,"-cutthrough") == 0)
			cutthrough=1;
		else if (strcmp(*argv,"-serverpref") == 0)
			off|=SSL_OP_CIPHER_SERVER_PREFERENCE;
		else if (strcmp(*argv,"-legacy_renegotiation") == 0)
			off|=SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION;
		else if	(strcmp(*argv,"-legacy_server_connect") == 0)
			{ off|=SSL_OP_LEGACY_SERVER_CONNECT; }
		else if	(strcmp(*argv,"-no_legacy_server_connect") == 0)
			{ clr|=SSL_OP_LEGACY_SERVER_CONNECT; }
		else if	(strcmp(*argv,"-cipher") == 0)
			{
			if (--argc < 1) goto bad;
			cipher= *(++argv);
			}
#ifdef FIONBIO
		else if (strcmp(*argv,"-nbio") == 0)
			{ c_nbio=1; }
#endif
		else if	(strcmp(*argv,"-starttls") == 0)
			{
			if (--argc < 1) goto bad;
			++argv;
			if (strcmp(*argv,"smtp") == 0)
				starttls_proto = PROTO_SMTP;
			else if (strcmp(*argv,"pop3") == 0)
				starttls_proto = PROTO_POP3;
			else if (strcmp(*argv,"imap") == 0)
				starttls_proto = PROTO_IMAP;
			else if (strcmp(*argv,"ftp") == 0)
				starttls_proto = PROTO_FTP;
			else if (strcmp(*argv, "xmpp") == 0)
				starttls_proto = PROTO_XMPP;
			else
				goto bad;
			}
#ifndef OPENSSL_NO_ENGINE
		else if	(strcmp(*argv,"-engine") == 0)
			{
			if (--argc < 1) goto bad;
			engine_id = *(++argv);
			}
		else if	(strcmp(*argv,"-ssl_client_engine") == 0)
			{
			if (--argc < 1) goto bad;
			ssl_client_engine_id = *(++argv);
			}
#endif
		else if (strcmp(*argv,"-rand") == 0)
			{
			if (--argc < 1) goto bad;
			inrand= *(++argv);
			}
#ifndef OPENSSL_NO_TLSEXT
		else if (strcmp(*argv,"-servername") == 0)
			{
			if (--argc < 1) goto bad;
			servername= *(++argv);
			/* meth=TLSv1_client_method(); */
			}
#endif
#ifndef OPENSSL_NO_JPAKE
		else if (strcmp(*argv,"-jpake") == 0)
			{
			if (--argc < 1) goto bad;
			jpake_secret = *++argv;
			}
#endif
		else
			{
			BIO_printf(bio_err,"unknown option %s\n",*argv);
			badop=1;
			break;
			}
		argc--;
		argv++;
		}
	if (badop)
		{
bad:
		sc_usage();
		goto end;
		}

	OpenSSL_add_ssl_algorithms();
	SSL_load_error_strings();

#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine_id, 1);
	if (ssl_client_engine_id)
		{
		ssl_client_engine = ENGINE_by_id(ssl_client_engine_id);
		if (!ssl_client_engine)
			{
			BIO_printf(bio_err,
					"Error getting client auth engine\n");
			goto end;
			}
		}
#endif
	if (!app_passwd(bio_err, passarg, NULL, &pass, NULL))
		{
		BIO_printf(bio_err, "Error getting password\n");
		goto end;
		}

	if (key_file == NULL)
		key_file = cert_file;


	if (key_file)

		{

		key = load_key(bio_err, key_file, key_format, 0, pass, e,
			       "client certificate private key file");
		if (!key)
			{
			ERR_print_errors(bio_err);
			goto end;
			}

		}

	if (cert_file)

		{
		cert = load_cert(bio_err,cert_file,cert_format,
				NULL, e, "client certificate file");

		if (!cert)
			{
			ERR_print_errors(bio_err);
			goto end;
			}
		}

	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
		&& !RAND_status())
		{
		BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
		}
	if (inrand != NULL)
		BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
			app_RAND_load_files(inrand));

	if (bio_c_out == NULL)
		{
		if (c_quiet && !c_debug && !c_msg)
			{
			bio_c_out=BIO_new(BIO_s_null());
			}
		else
			{
			if (bio_c_out == NULL)
				bio_c_out=BIO_new_fp(stdout,BIO_NOCLOSE);
			}
		}

	ctx=SSL_CTX_new(meth);
	if (ctx == NULL)
		{
		ERR_print_errors(bio_err);
		goto end;
		}

#ifndef OPENSSL_NO_ENGINE
	if (ssl_client_engine)
		{
		if (!SSL_CTX_set_client_cert_engine(ctx, ssl_client_engine))
			{
			BIO_puts(bio_err, "Error setting client auth engine\n");
			ERR_print_errors(bio_err);
			ENGINE_free(ssl_client_engine);
			goto end;
			}
		ENGINE_free(ssl_client_engine);
		}
#endif

	if (bugs)
		SSL_CTX_set_options(ctx,SSL_OP_ALL|off);
	else
		SSL_CTX_set_options(ctx,off);

	if (clr)
		SSL_CTX_clear_options(ctx, clr);
	/* DTLS: partial reads end up discarding unread UDP bytes :-( 
	 * Setting read ahead solves this problem.
	 */
	if (sock_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx, 1);

	/* Enable handshake cutthrough for client connections using
	 * strong ciphers. */
	if (cutthrough)
		{
		int ssl_mode = SSL_CTX_get_mode(ctx);
		ssl_mode |= SSL_MODE_HANDSHAKE_CUTTHROUGH;
		SSL_CTX_set_mode(ctx, ssl_mode);
		}

	if (state) SSL_CTX_set_info_callback(ctx,apps_ssl_info_callback);
	if (cipher != NULL)
		if(!SSL_CTX_set_cipher_list(ctx,cipher)) {
		BIO_printf(bio_err,"error setting cipher list\n");
		ERR_print_errors(bio_err);
		goto end;
	}
#if 0
	else
		SSL_CTX_set_cipher_list(ctx,getenv("SSL_CIPHER"));
#endif

	SSL_CTX_set_verify(ctx,verify,verify_callback);
	if (!set_cert_key_stuff(ctx,cert,key))
		goto end;

	if ((!SSL_CTX_load_verify_locations(ctx,CAfile,CApath)) ||
		(!SSL_CTX_set_default_verify_paths(ctx)))
		{
		/* BIO_printf(bio_err,"error setting default verify locations\n"); */
		ERR_print_errors(bio_err);
		/* goto end; */
		}

	store = SSL_CTX_get_cert_store(ctx);
	X509_STORE_set_flags(store, vflags);
#ifndef OPENSSL_NO_TLSEXT
	if (servername != NULL)
		{
		tlsextcbp.biodebug = bio_err;
		SSL_CTX_set_tlsext_servername_callback(ctx, ssl_servername_cb);
		SSL_CTX_set_tlsext_servername_arg(ctx, &tlsextcbp);
		}
#endif

	con=SSL_new(ctx);
	if (sess_in)
		{
		SSL_SESSION *sess;
		BIO *stmp = BIO_new_file(sess_in, "r");
		if (!stmp)
			{
			BIO_printf(bio_err, "Can't open session file %s\n",
						sess_in);
			ERR_print_errors(bio_err);
			goto end;
			}
		sess = PEM_read_bio_SSL_SESSION(stmp, NULL, 0, NULL);
		BIO_free(stmp);
		if (!sess)
			{
			BIO_printf(bio_err, "Can't open session file %s\n",
						sess_in);
			ERR_print_errors(bio_err);
			goto end;
			}
		SSL_set_session(con, sess);
		SSL_SESSION_free(sess);
		}
#ifndef OPENSSL_NO_TLSEXT
	if (servername != NULL)
		{
		if (!SSL_set_tlsext_host_name(con,servername))
			{
			BIO_printf(bio_err,"Unable to set TLS servername extension.\n");
			ERR_print_errors(bio_err);
			goto end;
			}
		}
#endif

#ifndef OPENSSL_NO_KRB5
	if (con  &&  (con->kssl_ctx = kssl_ctx_new()) != NULL)
                {
                kssl_ctx_setstring(con->kssl_ctx, KSSL_SERVER, host);
		}
#endif	/* OPENSSL_NO_KRB5  */
/*	SSL_set_cipher_list(con,"RC4-MD5"); */

re_start:

	if (init_client(&s,host,port,sock_type) == 0)
		{
		BIO_printf(bio_err,"connect:errno=%d\n",get_last_socket_error());
		SHUTDOWN(s);
		goto end;
		}
	BIO_printf(bio_c_out,"CONNECTED(%08X)\n",s);

#ifdef FIONBIO
	if (c_nbio)
		{
		unsigned long l=1;
		BIO_printf(bio_c_out,"turning on non blocking io\n");
		if (BIO_socket_ioctl(s,FIONBIO,&l) < 0)
			{
			ERR_print_errors(bio_err);
			goto end;
			}
		}
#endif                                              
	if (c_Pause & 0x01) con->debug=1;

	if ( SSL_version(con) == DTLS1_VERSION)
		{

		sbio=BIO_new_dgram(s,BIO_NOCLOSE);
		if (getsockname(s, &peer, (void *)&peerlen) < 0)
			{
			BIO_printf(bio_err, "getsockname:errno=%d\n",
				get_last_socket_error());
			SHUTDOWN(s);
			goto end;
			}

		(void)BIO_ctrl_set_connected(sbio, 1, &peer);

		if ( enable_timeouts)
			{
			timeout.tv_sec = 0;
			timeout.tv_usec = DGRAM_RCV_TIMEOUT;
			BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_RECV_TIMEOUT, 0, &timeout);
			
			timeout.tv_sec = 0;
			timeout.tv_usec = DGRAM_SND_TIMEOUT;
			BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout);
			}

		if (socket_mtu > 28)
			{
			SSL_set_options(con, SSL_OP_NO_QUERY_MTU);
			SSL_set_mtu(con, socket_mtu - 28);
			}
		else
			/* want to do MTU discovery */
			BIO_ctrl(sbio, BIO_CTRL_DGRAM_MTU_DISCOVER, 0, NULL);
		}
	else
		sbio=BIO_new_socket(s,BIO_NOCLOSE);

	if (nbio_test)
		{
		BIO *test;

		test=BIO_new(BIO_f_nbio_test());
		sbio=BIO_push(test,sbio);
		}

	if (c_debug)
		{
		con->debug=1;
		BIO_set_callback(sbio,bio_dump_callback);
		BIO_set_callback_arg(sbio,(char *)bio_c_out);
		}
	if (c_msg)
		{
		SSL_set_msg_callback(con, msg_cb);
		SSL_set_msg_callback_arg(con, bio_c_out);
		}
#ifndef OPENSSL_NO_TLSEXT
	if (c_tlsextdebug)
		{
		SSL_set_tlsext_debug_callback(con, tlsext_cb);
		SSL_set_tlsext_debug_arg(con, bio_c_out);
		}
	if (c_status_req)
		{
		SSL_set_tlsext_status_type(con, TLSEXT_STATUSTYPE_ocsp);
		SSL_CTX_set_tlsext_status_cb(ctx, ocsp_resp_cb);
		SSL_CTX_set_tlsext_status_arg(ctx, bio_c_out);
#if 0
{
STACK_OF(OCSP_RESPID) *ids = sk_OCSP_RESPID_new_null();
OCSP_RESPID *id = OCSP_RESPID_new();
id->value.byKey = ASN1_OCTET_STRING_new();
id->type = V_OCSP_RESPID_KEY;
ASN1_STRING_set(id->value.byKey, "Hello World", -1);
sk_OCSP_RESPID_push(ids, id);
SSL_set_tlsext_status_ids(con, ids);
}
#endif
		}
#endif
#ifndef OPENSSL_NO_JPAKE
	if (jpake_secret)
		jpake_client_auth(bio_c_out, sbio, jpake_secret);
#endif

	SSL_set_bio(con,sbio,sbio);
	SSL_set_connect_state(con);

	/* ok, lets connect */
	width=SSL_get_fd(con)+1;

	read_tty=1;
	write_tty=0;
	tty_on=0;
	read_ssl=1;
	write_ssl=1;
	
	cbuf_len=0;
	cbuf_off=0;
	sbuf_len=0;
	sbuf_off=0;

	/* This is an ugly hack that does a lot of assumptions */
	/* We do have to handle multi-line responses which may come
 	   in a single packet or not. We therefore have to use
	   BIO_gets() which does need a buffering BIO. So during
	   the initial chitchat we do push a buffering BIO into the
	   chain that is removed again later on to not disturb the
	   rest of the s_client operation. */
	if (starttls_proto == PROTO_SMTP)
		{
		int foundit=0;
		BIO *fbio = BIO_new(BIO_f_buffer());
		BIO_push(fbio, sbio);
		/* wait for multi-line response to end from SMTP */
		do
			{
			mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
			}
		while (mbuf_len>3 && mbuf[3]=='-');
		/* STARTTLS command requires EHLO... */
		BIO_printf(fbio,"EHLO openssl.client.net\r\n");
		(void)BIO_flush(fbio);
		/* wait for multi-line response to end EHLO SMTP response */
		do
			{
			mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
			if (strstr(mbuf,"STARTTLS"))
				foundit=1;
			}
		while (mbuf_len>3 && mbuf[3]=='-');
		(void)BIO_flush(fbio);
		BIO_pop(fbio);
		BIO_free(fbio);
		if (!foundit)
			BIO_printf(bio_err,
				   "didn't found starttls in server response,"
				   " try anyway...\n");
		BIO_printf(sbio,"STARTTLS\r\n");
		BIO_read(sbio,sbuf,BUFSIZZ);
		}
	else if (starttls_proto == PROTO_POP3)
		{
		BIO_read(sbio,mbuf,BUFSIZZ);
		BIO_printf(sbio,"STLS\r\n");
		BIO_read(sbio,sbuf,BUFSIZZ);
		}
	else if (starttls_proto == PROTO_IMAP)
		{
		int foundit=0;
		BIO *fbio = BIO_new(BIO_f_buffer());
		BIO_push(fbio, sbio);
		BIO_gets(fbio,mbuf,BUFSIZZ);
		/* STARTTLS command requires CAPABILITY... */
		BIO_printf(fbio,". CAPABILITY\r\n");
		(void)BIO_flush(fbio);
		/* wait for multi-line CAPABILITY response */
		do
			{
			mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
			if (strstr(mbuf,"STARTTLS"))
				foundit=1;
			}
		while (mbuf_len>3 && mbuf[0]!='.');
		(void)BIO_flush(fbio);
		BIO_pop(fbio);
		BIO_free(fbio);
		if (!foundit)
			BIO_printf(bio_err,
				   "didn't found STARTTLS in server response,"
				   " try anyway...\n");
		BIO_printf(sbio,". STARTTLS\r\n");
		BIO_read(sbio,sbuf,BUFSIZZ);
		}
	else if (starttls_proto == PROTO_FTP)
		{
		BIO *fbio = BIO_new(BIO_f_buffer());
		BIO_push(fbio, sbio);
		/* wait for multi-line response to end from FTP */
		do
			{
			mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
			}
		while (mbuf_len>3 && mbuf[3]=='-');
		(void)BIO_flush(fbio);
		BIO_pop(fbio);
		BIO_free(fbio);
		BIO_printf(sbio,"AUTH TLS\r\n");
		BIO_read(sbio,sbuf,BUFSIZZ);
		}
	if (starttls_proto == PROTO_XMPP)
		{
		int seen = 0;
		BIO_printf(sbio,"<stream:stream "
		    "xmlns:stream='http://etherx.jabber.org/streams' "
		    "xmlns='jabber:client' to='%s' version='1.0'>", host);
		seen = BIO_read(sbio,mbuf,BUFSIZZ);
		mbuf[seen] = 0;
		while (!strstr(mbuf, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'"))
			{
			if (strstr(mbuf, "/stream:features>"))
				goto shut;
			seen = BIO_read(sbio,mbuf,BUFSIZZ);
			mbuf[seen] = 0;
			}
		BIO_printf(sbio, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'/>");
		seen = BIO_read(sbio,sbuf,BUFSIZZ);
		sbuf[seen] = 0;
		if (!strstr(sbuf, "<proceed"))
			goto shut;
		mbuf[0] = 0;
		}

	for (;;)
		{
		FD_ZERO(&readfds);
		FD_ZERO(&writefds);

		if ((SSL_version(con) == DTLS1_VERSION) &&
			DTLSv1_get_timeout(con, &timeout))
			timeoutp = &timeout;
		else
			timeoutp = NULL;

		if (SSL_in_init(con) && !SSL_total_renegotiations(con))
			{
			in_init=1;
			tty_on=0;
			}
		else
			{
			tty_on=1;
			if (in_init)
				{
				in_init=0;
				if (sess_out)
					{
					BIO *stmp = BIO_new_file(sess_out, "w");
					if (stmp)
						{
						PEM_write_bio_SSL_SESSION(stmp, SSL_get_session(con));
						BIO_free(stmp);
						}
					else 
						BIO_printf(bio_err, "Error writing session file %s\n", sess_out);
					}
				print_stuff(bio_c_out,con,full_log);
				if (full_log > 0) full_log--;

				if (starttls_proto)
					{
					BIO_printf(bio_err,"%s",mbuf);
					/* We don't need to know any more */
					starttls_proto = PROTO_OFF;
					}

				if (reconnect)
					{
					reconnect--;
					BIO_printf(bio_c_out,"drop connection and then reconnect\n");
					SSL_shutdown(con);
					SSL_set_connect_state(con);
					SHUTDOWN(SSL_get_fd(con));
					goto re_start;
					}
				}
			}

		ssl_pending = read_ssl && SSL_pending(con);

		if (!ssl_pending)
			{
#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE)
			if (tty_on)
				{
				if (read_tty)  FD_SET(fileno(stdin),&readfds);
				if (write_tty) FD_SET(fileno(stdout),&writefds);
				}
			if (read_ssl)
				FD_SET(SSL_get_fd(con),&readfds);
			if (write_ssl)
				FD_SET(SSL_get_fd(con),&writefds);
#else
			if(!tty_on || !write_tty) {
				if (read_ssl)
					FD_SET(SSL_get_fd(con),&readfds);
				if (write_ssl)
					FD_SET(SSL_get_fd(con),&writefds);
			}
#endif
/*			printf("mode tty(%d %d%d) ssl(%d%d)\n",
				tty_on,read_tty,write_tty,read_ssl,write_ssl);*/

			/* Note: under VMS with SOCKETSHR the second parameter
			 * is currently of type (int *) whereas under other
			 * systems it is (void *) if you don't have a cast it
			 * will choke the compiler: if you do have a cast then
			 * you can either go for (int *) or (void *).
			 */
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
                        /* Under Windows/DOS we make the assumption that we can
			 * always write to the tty: therefore if we need to
			 * write to the tty we just fall through. Otherwise
			 * we timeout the select every second and see if there
			 * are any keypresses. Note: this is a hack, in a proper
			 * Windows application we wouldn't do this.
			 */
			i=0;
			if(!write_tty) {
				if(read_tty) {
					tv.tv_sec = 1;
					tv.tv_usec = 0;
					i=select(width,(void *)&readfds,(void *)&writefds,
						 NULL,&tv);
#if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
					if(!i && (!_kbhit() || !read_tty) ) continue;
#else
					if(!i && (!((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0))) || !read_tty) ) continue;
#endif
				} else 	i=select(width,(void *)&readfds,(void *)&writefds,
					 NULL,timeoutp);
			}
#elif defined(OPENSSL_SYS_NETWARE)
			if(!write_tty) {
				if(read_tty) {
					tv.tv_sec = 1;
					tv.tv_usec = 0;
					i=select(width,(void *)&readfds,(void *)&writefds,
						NULL,&tv);
				} else 	i=select(width,(void *)&readfds,(void *)&writefds,
					NULL,timeoutp);
			}
#else
			i=select(width,(void *)&readfds,(void *)&writefds,
				 NULL,timeoutp);
#endif
			if ( i < 0)
				{
				BIO_printf(bio_err,"bad select %d\n",
				get_last_socket_error());
				goto shut;
				/* goto end; */
				}
			}

		if ((SSL_version(con) == DTLS1_VERSION) && DTLSv1_handle_timeout(con) > 0)
			{
			BIO_printf(bio_err,"TIMEOUT occured\n");
			}

		if (!ssl_pending && FD_ISSET(SSL_get_fd(con),&writefds))
			{
			k=SSL_write(con,&(cbuf[cbuf_off]),
				(unsigned int)cbuf_len);
			switch (SSL_get_error(con,k))
				{
			case SSL_ERROR_NONE:
				cbuf_off+=k;
				cbuf_len-=k;
				if (k <= 0) goto end;
				/* we have done a  write(con,NULL,0); */
				if (cbuf_len <= 0)
					{
					read_tty=1;
					write_ssl=0;
					}
				else /* if (cbuf_len > 0) */
					{
					read_tty=0;
					write_ssl=1;
					}
				break;
			case SSL_ERROR_WANT_WRITE:
				BIO_printf(bio_c_out,"write W BLOCK\n");
				write_ssl=1;
				read_tty=0;
				break;
			case SSL_ERROR_WANT_READ:
				BIO_printf(bio_c_out,"write R BLOCK\n");
				write_tty=0;
				read_ssl=1;
				write_ssl=0;
				break;
			case SSL_ERROR_WANT_X509_LOOKUP:
				BIO_printf(bio_c_out,"write X BLOCK\n");
				break;
			case SSL_ERROR_ZERO_RETURN:
				if (cbuf_len != 0)
					{
					BIO_printf(bio_c_out,"shutdown\n");
					goto shut;
					}
				else
					{
					read_tty=1;
					write_ssl=0;
					break;
					}
				
			case SSL_ERROR_SYSCALL:
				if ((k != 0) || (cbuf_len != 0))
					{
					BIO_printf(bio_err,"write:errno=%d\n",
						get_last_socket_error());
					goto shut;
					}
				else
					{
					read_tty=1;
					write_ssl=0;
					}
				break;
			case SSL_ERROR_SSL:
				ERR_print_errors(bio_err);
				goto shut;
				}
			}
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
		/* Assume Windows/DOS can always write */
		else if (!ssl_pending && write_tty)
#else
		else if (!ssl_pending && FD_ISSET(fileno(stdout),&writefds))
#endif
			{
#ifdef CHARSET_EBCDIC
			ascii2ebcdic(&(sbuf[sbuf_off]),&(sbuf[sbuf_off]),sbuf_len);
#endif
			i=write(fileno(stdout),&(sbuf[sbuf_off]),sbuf_len);

			if (i <= 0)
				{
				BIO_printf(bio_c_out,"DONE\n");
				goto shut;
				/* goto end; */
				}

			sbuf_len-=i;;
			sbuf_off+=i;
			if (sbuf_len <= 0)
				{
				read_ssl=1;
				write_tty=0;
				}
			}
		else if (ssl_pending || FD_ISSET(SSL_get_fd(con),&readfds))
			{
#ifdef RENEG
{ static int iiii; if (++iiii == 52) { SSL_renegotiate(con); iiii=0; } }
#endif
#if 1
			k=SSL_read(con,sbuf,1024 /* BUFSIZZ */ );
#else
/* Demo for pending and peek :-) */
			k=SSL_read(con,sbuf,16);
{ char zbuf[10240]; 
printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240));
}
#endif

			switch (SSL_get_error(con,k))
				{
			case SSL_ERROR_NONE:
				if (k <= 0)
					goto end;
				sbuf_off=0;
				sbuf_len=k;

				read_ssl=0;
				write_tty=1;
				break;
			case SSL_ERROR_WANT_WRITE:
				BIO_printf(bio_c_out,"read W BLOCK\n");
				write_ssl=1;
				read_tty=0;
				break;
			case SSL_ERROR_WANT_READ:
				BIO_printf(bio_c_out,"read R BLOCK\n");
				write_tty=0;
				read_ssl=1;
				if ((read_tty == 0) && (write_ssl == 0))
					write_ssl=1;
				break;
			case SSL_ERROR_WANT_X509_LOOKUP:
				BIO_printf(bio_c_out,"read X BLOCK\n");
				break;
			case SSL_ERROR_SYSCALL:
				BIO_printf(bio_err,"read:errno=%d\n",get_last_socket_error());
				goto shut;
			case SSL_ERROR_ZERO_RETURN:
				BIO_printf(bio_c_out,"closed\n");
				goto shut;
			case SSL_ERROR_SSL:
				ERR_print_errors(bio_err);
				goto shut;
				/* break; */
				}
			}

#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
#if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
		else if (_kbhit())
#else
		else if ((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
#endif
#elif defined (OPENSSL_SYS_NETWARE)
        else if (_kbhit())
#else
		else if (FD_ISSET(fileno(stdin),&readfds))
#endif
			{
			if (crlf)
				{
				int j, lf_num;

				i=read(fileno(stdin),cbuf,BUFSIZZ/2);
				lf_num = 0;
				/* both loops are skipped when i <= 0 */
				for (j = 0; j < i; j++)
					if (cbuf[j] == '\n')
						lf_num++;
				for (j = i-1; j >= 0; j--)
					{
					cbuf[j+lf_num] = cbuf[j];
					if (cbuf[j] == '\n')
						{
						lf_num--;
						i++;
						cbuf[j+lf_num] = '\r';
						}
					}
				assert(lf_num == 0);
				}
			else
				i=read(fileno(stdin),cbuf,BUFSIZZ);

			if ((!c_ign_eof) && ((i <= 0) || (cbuf[0] == 'Q')))
				{
				BIO_printf(bio_err,"DONE\n");
				goto shut;
				}

			if ((!c_ign_eof) && (cbuf[0] == 'R'))
				{
				BIO_printf(bio_err,"RENEGOTIATING\n");
				SSL_renegotiate(con);
				cbuf_len=0;
				}
			else
				{
				cbuf_len=i;
				cbuf_off=0;
#ifdef CHARSET_EBCDIC
				ebcdic2ascii(cbuf, cbuf, i);
#endif
				}

			write_ssl=1;
			read_tty=0;
			}
		}
shut:
	SSL_shutdown(con);
	SHUTDOWN(SSL_get_fd(con));
	ret=0;
end:
	if(prexit) print_stuff(bio_c_out,con,1);
	if (con != NULL) SSL_free(con);
	if (con2 != NULL) SSL_free(con2);
	if (ctx != NULL) SSL_CTX_free(ctx);
	if (cert)
		X509_free(cert);
	if (key)
		EVP_PKEY_free(key);
	if (pass)
		OPENSSL_free(pass);
	if (cbuf != NULL) { OPENSSL_cleanse(cbuf,BUFSIZZ); OPENSSL_free(cbuf); }
	if (sbuf != NULL) { OPENSSL_cleanse(sbuf,BUFSIZZ); OPENSSL_free(sbuf); }
	if (mbuf != NULL) { OPENSSL_cleanse(mbuf,BUFSIZZ); OPENSSL_free(mbuf); }
	if (bio_c_out != NULL)
		{
		BIO_free(bio_c_out);
		bio_c_out=NULL;
		}
	apps_shutdown();
	OPENSSL_EXIT(ret);
	}
示例#17
0
int
s_client_main(int argc, char **argv)
{
	unsigned int off = 0, clr = 0;
	SSL *con = NULL;
	int s, k, width, state = 0, af = AF_UNSPEC;
	char *cbuf = NULL, *sbuf = NULL, *mbuf = NULL;
	int cbuf_len, cbuf_off;
	int sbuf_len, sbuf_off;
	fd_set readfds, writefds;
	char *port = PORT_STR;
	int full_log = 1;
	char *host = SSL_HOST_NAME;
	char *cert_file = NULL, *key_file = NULL;
	int cert_format = FORMAT_PEM, key_format = FORMAT_PEM;
	char *passarg = NULL, *pass = NULL;
	X509 *cert = NULL;
	EVP_PKEY *key = NULL;
	char *CApath = NULL, *CAfile = NULL, *cipher = NULL;
	int reconnect = 0, badop = 0, verify = SSL_VERIFY_NONE, bugs = 0;
	int crlf = 0;
	int write_tty, read_tty, write_ssl, read_ssl, tty_on, ssl_pending;
	SSL_CTX *ctx = NULL;
	int ret = 1, in_init = 1, i, nbio_test = 0;
	int starttls_proto = PROTO_OFF;
	int prexit = 0;
	X509_VERIFY_PARAM *vpm = NULL;
	int badarg = 0;
	const SSL_METHOD *meth = NULL;
	int socket_type = SOCK_STREAM;
	BIO *sbio;
	int mbuf_len = 0;
	struct timeval timeout, *timeoutp;
	const char *errstr = NULL;
#ifndef OPENSSL_NO_ENGINE
	char *engine_id = NULL;
	char *ssl_client_engine_id = NULL;
	ENGINE *ssl_client_engine = NULL;
#endif
	ENGINE *e = NULL;
#ifndef OPENSSL_NO_TLSEXT
	char *servername = NULL;
	tlsextctx tlsextcbp =
	{NULL, 0};
#ifndef OPENSSL_NO_NEXTPROTONEG
	const char *next_proto_neg_in = NULL;
#endif
#endif
	char *sess_in = NULL;
	char *sess_out = NULL;
	struct sockaddr peer;
	int peerlen = sizeof(peer);
	int enable_timeouts = 0;
	long socket_mtu = 0;

	meth = SSLv23_client_method();

	c_Pause = 0;
	c_quiet = 0;
	c_ign_eof = 0;
	c_debug = 0;
	c_msg = 0;
	c_showcerts = 0;

	if (((cbuf = malloc(BUFSIZZ)) == NULL) ||
	    ((sbuf = malloc(BUFSIZZ)) == NULL) ||
	    ((mbuf = malloc(BUFSIZZ + 1)) == NULL)) {	/* NUL byte */
		BIO_printf(bio_err, "out of memory\n");
		goto end;
	}
	verify_depth = 0;
	verify_error = X509_V_OK;
	c_nbio = 0;

	argc--;
	argv++;
	while (argc >= 1) {
		if (strcmp(*argv, "-host") == 0) {
			if (--argc < 1)
				goto bad;
			host = *(++argv);
		} else if (strcmp(*argv, "-port") == 0) {
			if (--argc < 1)
				goto bad;
			port = *(++argv);
			if (port == NULL || *port == '\0')
				goto bad;
		} else if (strcmp(*argv, "-connect") == 0) {
			if (--argc < 1)
				goto bad;
			if (!extract_host_port(*(++argv), &host, NULL, &port))
				goto bad;
		} else if (strcmp(*argv, "-verify") == 0) {
			verify = SSL_VERIFY_PEER;
			if (--argc < 1)
				goto bad;
			verify_depth = strtonum(*(++argv), 0, INT_MAX, &errstr);
			if (errstr)
				goto bad;
			BIO_printf(bio_err, "verify depth is %d\n", verify_depth);
		} else if (strcmp(*argv, "-cert") == 0) {
			if (--argc < 1)
				goto bad;
			cert_file = *(++argv);
		} else if (strcmp(*argv, "-sess_out") == 0) {
			if (--argc < 1)
				goto bad;
			sess_out = *(++argv);
		} else if (strcmp(*argv, "-sess_in") == 0) {
			if (--argc < 1)
				goto bad;
			sess_in = *(++argv);
		} else if (strcmp(*argv, "-certform") == 0) {
			if (--argc < 1)
				goto bad;
			cert_format = str2fmt(*(++argv));
		} else if (args_verify(&argv, &argc, &badarg, bio_err, &vpm)) {
			if (badarg)
				goto bad;
			continue;
		} else if (strcmp(*argv, "-verify_return_error") == 0)
			verify_return_error = 1;
		else if (strcmp(*argv, "-prexit") == 0)
			prexit = 1;
		else if (strcmp(*argv, "-crlf") == 0)
			crlf = 1;
		else if (strcmp(*argv, "-quiet") == 0) {
			c_quiet = 1;
			c_ign_eof = 1;
		} else if (strcmp(*argv, "-ign_eof") == 0)
			c_ign_eof = 1;
		else if (strcmp(*argv, "-no_ign_eof") == 0)
			c_ign_eof = 0;
		else if (strcmp(*argv, "-pause") == 0)
			c_Pause = 1;
		else if (strcmp(*argv, "-debug") == 0)
			c_debug = 1;
#ifndef OPENSSL_NO_TLSEXT
		else if (strcmp(*argv, "-tlsextdebug") == 0)
			c_tlsextdebug = 1;
		else if (strcmp(*argv, "-status") == 0)
			c_status_req = 1;
#endif
		else if (strcmp(*argv, "-msg") == 0)
			c_msg = 1;
		else if (strcmp(*argv, "-showcerts") == 0)
			c_showcerts = 1;
		else if (strcmp(*argv, "-nbio_test") == 0)
			nbio_test = 1;
		else if (strcmp(*argv, "-state") == 0)
			state = 1;
		else if (strcmp(*argv, "-ssl3") == 0)
			meth = SSLv3_client_method();
		else if (strcmp(*argv, "-tls1_2") == 0)
			meth = TLSv1_2_client_method();
		else if (strcmp(*argv, "-tls1_1") == 0)
			meth = TLSv1_1_client_method();
		else if (strcmp(*argv, "-tls1") == 0)
			meth = TLSv1_client_method();
#ifndef OPENSSL_NO_DTLS1
		else if (strcmp(*argv, "-dtls1") == 0) {
			meth = DTLSv1_client_method();
			socket_type = SOCK_DGRAM;
		} else if (strcmp(*argv, "-timeout") == 0)
			enable_timeouts = 1;
		else if (strcmp(*argv, "-mtu") == 0) {
			if (--argc < 1)
				goto bad;
			socket_mtu = strtonum(*(++argv), 0, LONG_MAX, &errstr);
			if (errstr)
				goto bad;
		}
#endif
		else if (strcmp(*argv, "-bugs") == 0)
			bugs = 1;
		else if (strcmp(*argv, "-keyform") == 0) {
			if (--argc < 1)
				goto bad;
			key_format = str2fmt(*(++argv));
		} else if (strcmp(*argv, "-pass") == 0) {
			if (--argc < 1)
				goto bad;
			passarg = *(++argv);
		} else if (strcmp(*argv, "-key") == 0) {
			if (--argc < 1)
				goto bad;
			key_file = *(++argv);
		} else if (strcmp(*argv, "-reconnect") == 0) {
			reconnect = 5;
		} else if (strcmp(*argv, "-CApath") == 0) {
			if (--argc < 1)
				goto bad;
			CApath = *(++argv);
		} else if (strcmp(*argv, "-CAfile") == 0) {
			if (--argc < 1)
				goto bad;
			CAfile = *(++argv);
		} else if (strcmp(*argv, "-no_tls1_2") == 0)
			off |= SSL_OP_NO_TLSv1_2;
		else if (strcmp(*argv, "-no_tls1_1") == 0)
			off |= SSL_OP_NO_TLSv1_1;
		else if (strcmp(*argv, "-no_tls1") == 0)
			off |= SSL_OP_NO_TLSv1;
		else if (strcmp(*argv, "-no_ssl3") == 0)
			off |= SSL_OP_NO_SSLv3;
		else if (strcmp(*argv, "-no_ssl2") == 0)
			off |= SSL_OP_NO_SSLv2;
		else if (strcmp(*argv, "-no_comp") == 0) {
			off |= SSL_OP_NO_COMPRESSION;
		}
#ifndef OPENSSL_NO_TLSEXT
		else if (strcmp(*argv, "-no_ticket") == 0) {
			off |= SSL_OP_NO_TICKET;
		}
#ifndef OPENSSL_NO_NEXTPROTONEG
		else if (strcmp(*argv, "-nextprotoneg") == 0) {
			if (--argc < 1)
				goto bad;
			next_proto_neg_in = *(++argv);
		}
#endif
#endif
		else if (strcmp(*argv, "-serverpref") == 0)
			off |= SSL_OP_CIPHER_SERVER_PREFERENCE;
		else if (strcmp(*argv, "-legacy_renegotiation") == 0)
			; /* no-op */
		else if (strcmp(*argv, "-legacy_server_connect") == 0) {
			off |= SSL_OP_LEGACY_SERVER_CONNECT;
		} else if (strcmp(*argv, "-no_legacy_server_connect") == 0) {
			clr |= SSL_OP_LEGACY_SERVER_CONNECT;
		} else if (strcmp(*argv, "-cipher") == 0) {
			if (--argc < 1)
				goto bad;
			cipher = *(++argv);
		}
		else if (strcmp(*argv, "-nbio") == 0) {
			c_nbio = 1;
		}
		else if (strcmp(*argv, "-starttls") == 0) {
			if (--argc < 1)
				goto bad;
			++argv;
			if (strcmp(*argv, "smtp") == 0)
				starttls_proto = PROTO_SMTP;
			else if (strcmp(*argv, "lmtp") == 0)
				starttls_proto = PROTO_LMTP;
			else if (strcmp(*argv, "pop3") == 0)
				starttls_proto = PROTO_POP3;
			else if (strcmp(*argv, "imap") == 0)
				starttls_proto = PROTO_IMAP;
			else if (strcmp(*argv, "ftp") == 0)
				starttls_proto = PROTO_FTP;
			else if (strcmp(*argv, "xmpp") == 0)
				starttls_proto = PROTO_XMPP;
			else
				goto bad;
		}
#ifndef OPENSSL_NO_ENGINE
		else if (strcmp(*argv, "-engine") == 0) {
			if (--argc < 1)
				goto bad;
			engine_id = *(++argv);
		} else if (strcmp(*argv, "-ssl_client_engine") == 0) {
			if (--argc < 1)
				goto bad;
			ssl_client_engine_id = *(++argv);
		}
#endif
		else if (strcmp(*argv, "-4") == 0) {
			af = AF_INET;
		} else if (strcmp(*argv, "-6") == 0) {
			af = AF_INET6;
		}
#ifndef OPENSSL_NO_TLSEXT
		else if (strcmp(*argv, "-servername") == 0) {
			if (--argc < 1)
				goto bad;
			servername = *(++argv);
			/* meth=TLSv1_client_method(); */
		}
#endif
#ifndef OPENSSL_NO_SRTP
		else if (strcmp(*argv, "-use_srtp") == 0) {
			if (--argc < 1)
				goto bad;
			srtp_profiles = *(++argv);
		}
#endif
		else if (strcmp(*argv, "-keymatexport") == 0) {
			if (--argc < 1)
				goto bad;
			keymatexportlabel = *(++argv);
		} else if (strcmp(*argv, "-keymatexportlen") == 0) {
			const char *errstr;

			if (--argc < 1)
				goto bad;
			keymatexportlen = strtonum(*(++argv), 1, INT_MAX, &errstr);
			if (errstr)
				goto bad;
		} else {
			BIO_printf(bio_err, "unknown option %s\n", *argv);
			badop = 1;
			break;
		}
		argc--;
		argv++;
	}
	if (badop) {
bad:
		if (errstr)
			BIO_printf(bio_err, "invalid argument %s: %s\n",
			    *argv, errstr);
		else
			sc_usage();
		goto end;
	}

#if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
	next_proto.status = -1;
	if (next_proto_neg_in) {
		next_proto.data = next_protos_parse(&next_proto.len, next_proto_neg_in);
		if (next_proto.data == NULL) {
			BIO_printf(bio_err, "Error parsing -nextprotoneg argument\n");
			goto end;
		}
	} else
		next_proto.data = NULL;
#endif

#ifndef OPENSSL_NO_ENGINE
	e = setup_engine(bio_err, engine_id, 1);
	if (ssl_client_engine_id) {
		ssl_client_engine = ENGINE_by_id(ssl_client_engine_id);
		if (!ssl_client_engine) {
			BIO_printf(bio_err,
			    "Error getting client auth engine\n");
			goto end;
		}
	}
#endif
	if (!app_passwd(bio_err, passarg, NULL, &pass, NULL)) {
		BIO_printf(bio_err, "Error getting password\n");
		goto end;
	}
	if (key_file == NULL)
		key_file = cert_file;


	if (key_file) {

		key = load_key(bio_err, key_file, key_format, 0, pass, e,
		    "client certificate private key file");
		if (!key) {
			ERR_print_errors(bio_err);
			goto end;
		}
	}
	if (cert_file) {
		cert = load_cert(bio_err, cert_file, cert_format,
		    NULL, e, "client certificate file");

		if (!cert) {
			ERR_print_errors(bio_err);
			goto end;
		}
	}
	if (bio_c_out == NULL) {
		if (c_quiet && !c_debug && !c_msg) {
			bio_c_out = BIO_new(BIO_s_null());
		} else {
			if (bio_c_out == NULL)
				bio_c_out = BIO_new_fp(stdout, BIO_NOCLOSE);
		}
	}

	ctx = SSL_CTX_new(meth);
	if (ctx == NULL) {
		ERR_print_errors(bio_err);
		goto end;
	}
	if (vpm)
		SSL_CTX_set1_param(ctx, vpm);

#ifndef OPENSSL_NO_ENGINE
	if (ssl_client_engine) {
		if (!SSL_CTX_set_client_cert_engine(ctx, ssl_client_engine)) {
			BIO_puts(bio_err, "Error setting client auth engine\n");
			ERR_print_errors(bio_err);
			ENGINE_free(ssl_client_engine);
			goto end;
		}
		ENGINE_free(ssl_client_engine);
	}
#endif

#ifndef OPENSSL_NO_SRTP
	if (srtp_profiles != NULL)
		SSL_CTX_set_tlsext_use_srtp(ctx, srtp_profiles);
#endif
	if (bugs)
		SSL_CTX_set_options(ctx, SSL_OP_ALL | off);
	else
		SSL_CTX_set_options(ctx, off);

	if (clr)
		SSL_CTX_clear_options(ctx, clr);
	/*
	 * DTLS: partial reads end up discarding unread UDP bytes :-( Setting
	 * read ahead solves this problem.
	 */
	if (socket_type == SOCK_DGRAM)
		SSL_CTX_set_read_ahead(ctx, 1);

#if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
	if (next_proto.data)
		SSL_CTX_set_next_proto_select_cb(ctx, next_proto_cb, &next_proto);
#endif

	if (state)
		SSL_CTX_set_info_callback(ctx, apps_ssl_info_callback);
	if (cipher != NULL)
		if (!SSL_CTX_set_cipher_list(ctx, cipher)) {
			BIO_printf(bio_err, "error setting cipher list\n");
			ERR_print_errors(bio_err);
			goto end;
		}

	SSL_CTX_set_verify(ctx, verify, verify_callback);
	if (!set_cert_key_stuff(ctx, cert, key))
		goto end;

	if ((!SSL_CTX_load_verify_locations(ctx, CAfile, CApath)) ||
	    (!SSL_CTX_set_default_verify_paths(ctx))) {
		/*
		 * BIO_printf(bio_err,"error setting default verify
		 * locations\n");
		 */
		ERR_print_errors(bio_err);
		/* goto end; */
	}
#ifndef OPENSSL_NO_TLSEXT
	if (servername != NULL) {
		tlsextcbp.biodebug = bio_err;
		SSL_CTX_set_tlsext_servername_callback(ctx, ssl_servername_cb);
		SSL_CTX_set_tlsext_servername_arg(ctx, &tlsextcbp);
	}
#endif

	con = SSL_new(ctx);
	if (sess_in) {
		SSL_SESSION *sess;
		BIO *stmp = BIO_new_file(sess_in, "r");
		if (!stmp) {
			BIO_printf(bio_err, "Can't open session file %s\n",
			    sess_in);
			ERR_print_errors(bio_err);
			goto end;
		}
		sess = PEM_read_bio_SSL_SESSION(stmp, NULL, 0, NULL);
		BIO_free(stmp);
		if (!sess) {
			BIO_printf(bio_err, "Can't open session file %s\n",
			    sess_in);
			ERR_print_errors(bio_err);
			goto end;
		}
		SSL_set_session(con, sess);
		SSL_SESSION_free(sess);
	}
#ifndef OPENSSL_NO_TLSEXT
	if (servername != NULL) {
		if (!SSL_set_tlsext_host_name(con, servername)) {
			BIO_printf(bio_err, "Unable to set TLS servername extension.\n");
			ERR_print_errors(bio_err);
			goto end;
		}
	}
#endif
/*	SSL_set_cipher_list(con,"RC4-MD5"); */

re_start:

	if (init_client(&s, host, port, socket_type, af) == 0) {
		BIO_printf(bio_err, "connect:errno=%d\n", errno);
		shutdown(s, SHUT_RD);
		close(s);
		goto end;
	}
	BIO_printf(bio_c_out, "CONNECTED(%08X)\n", s);

	if (c_nbio) {
		unsigned long l = 1;
		BIO_printf(bio_c_out, "turning on non blocking io\n");
		if (BIO_socket_ioctl(s, FIONBIO, &l) < 0) {
			ERR_print_errors(bio_err);
			goto end;
		}
	}
	if (c_Pause & 0x01)
		SSL_set_debug(con, 1);

	if (SSL_version(con) == DTLS1_VERSION) {

		sbio = BIO_new_dgram(s, BIO_NOCLOSE);
		if (getsockname(s, &peer, (void *) &peerlen) < 0) {
			BIO_printf(bio_err, "getsockname:errno=%d\n",
			    errno);
			shutdown(s, SHUT_RD);
			close(s);
			goto end;
		}
		(void) BIO_ctrl_set_connected(sbio, 1, &peer);

		if (enable_timeouts) {
			timeout.tv_sec = 0;
			timeout.tv_usec = DGRAM_RCV_TIMEOUT;
			BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_RECV_TIMEOUT, 0, &timeout);

			timeout.tv_sec = 0;
			timeout.tv_usec = DGRAM_SND_TIMEOUT;
			BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout);
		}
		if (socket_mtu > 28) {
			SSL_set_options(con, SSL_OP_NO_QUERY_MTU);
			SSL_set_mtu(con, socket_mtu - 28);
		} else
			/* want to do MTU discovery */
			BIO_ctrl(sbio, BIO_CTRL_DGRAM_MTU_DISCOVER, 0, NULL);
	} else
		sbio = BIO_new_socket(s, BIO_NOCLOSE);

	if (nbio_test) {
		BIO *test;

		test = BIO_new(BIO_f_nbio_test());
		sbio = BIO_push(test, sbio);
	}
	if (c_debug) {
		SSL_set_debug(con, 1);
		BIO_set_callback(sbio, bio_dump_callback);
		BIO_set_callback_arg(sbio, (char *) bio_c_out);
	}
	if (c_msg) {
		SSL_set_msg_callback(con, msg_cb);
		SSL_set_msg_callback_arg(con, bio_c_out);
	}
#ifndef OPENSSL_NO_TLSEXT
	if (c_tlsextdebug) {
		SSL_set_tlsext_debug_callback(con, tlsext_cb);
		SSL_set_tlsext_debug_arg(con, bio_c_out);
	}
	if (c_status_req) {
		SSL_set_tlsext_status_type(con, TLSEXT_STATUSTYPE_ocsp);
		SSL_CTX_set_tlsext_status_cb(ctx, ocsp_resp_cb);
		SSL_CTX_set_tlsext_status_arg(ctx, bio_c_out);
	}
#endif

	SSL_set_bio(con, sbio, sbio);
	SSL_set_connect_state(con);

	/* ok, lets connect */
	width = SSL_get_fd(con) + 1;

	read_tty = 1;
	write_tty = 0;
	tty_on = 0;
	read_ssl = 1;
	write_ssl = 1;

	cbuf_len = 0;
	cbuf_off = 0;
	sbuf_len = 0;
	sbuf_off = 0;

	/* This is an ugly hack that does a lot of assumptions */
	/*
	 * We do have to handle multi-line responses which may come in a
	 * single packet or not. We therefore have to use BIO_gets() which
	 * does need a buffering BIO. So during the initial chitchat we do
	 * push a buffering BIO into the chain that is removed again later on
	 * to not disturb the rest of the s_client operation.
	 */
	if (starttls_proto == PROTO_SMTP || starttls_proto == PROTO_LMTP) {
		int foundit = 0;
		BIO *fbio = BIO_new(BIO_f_buffer());
		BIO_push(fbio, sbio);
		/* wait for multi-line response to end from SMTP */
		do {
			mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
		}
		while (mbuf_len > 3 && mbuf[3] == '-');
		/* STARTTLS command requires EHLO... */
		BIO_printf(fbio, "%cHLO openssl.client.net\r\n",
			   starttls_proto == PROTO_SMTP ? 'E' : 'L');
		(void) BIO_flush(fbio);
		/* wait for multi-line response to end EHLO SMTP response */
		do {
			mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
			if (strstr(mbuf, "STARTTLS"))
				foundit = 1;
		}
		while (mbuf_len > 3 && mbuf[3] == '-');
		(void) BIO_flush(fbio);
		BIO_pop(fbio);
		BIO_free(fbio);
		if (!foundit)
			BIO_printf(bio_err,
			    "didn't found starttls in server response,"
			    " try anyway...\n");
		BIO_printf(sbio, "STARTTLS\r\n");
		BIO_read(sbio, sbuf, BUFSIZZ);
	} else if (starttls_proto == PROTO_POP3) {
		mbuf_len = BIO_read(sbio, mbuf, BUFSIZZ);
		if (mbuf_len == -1) {
			BIO_printf(bio_err, "BIO_read failed\n");
			goto end;
		}
		BIO_printf(sbio, "STLS\r\n");
		BIO_read(sbio, sbuf, BUFSIZZ);
	} else if (starttls_proto == PROTO_IMAP) {
		int foundit = 0;
		BIO *fbio = BIO_new(BIO_f_buffer());
		BIO_push(fbio, sbio);
		BIO_gets(fbio, mbuf, BUFSIZZ);
		/* STARTTLS command requires CAPABILITY... */
		BIO_printf(fbio, ". CAPABILITY\r\n");
		(void) BIO_flush(fbio);
		/* wait for multi-line CAPABILITY response */
		do {
			mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
			if (strstr(mbuf, "STARTTLS"))
				foundit = 1;
		}
		while (mbuf_len > 3 && mbuf[0] != '.');
		(void) BIO_flush(fbio);
		BIO_pop(fbio);
		BIO_free(fbio);
		if (!foundit)
			BIO_printf(bio_err,
			    "didn't found STARTTLS in server response,"
			    " try anyway...\n");
		BIO_printf(sbio, ". STARTTLS\r\n");
		BIO_read(sbio, sbuf, BUFSIZZ);
	} else if (starttls_proto == PROTO_FTP) {
		BIO *fbio = BIO_new(BIO_f_buffer());
		BIO_push(fbio, sbio);
		/* wait for multi-line response to end from FTP */
		do {
			mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
		}
		while (mbuf_len > 3 && mbuf[3] == '-');
		(void) BIO_flush(fbio);
		BIO_pop(fbio);
		BIO_free(fbio);
		BIO_printf(sbio, "AUTH TLS\r\n");
		BIO_read(sbio, sbuf, BUFSIZZ);
	}
	if (starttls_proto == PROTO_XMPP) {
		int seen = 0;
		BIO_printf(sbio, "<stream:stream "
		    "xmlns:stream='http://etherx.jabber.org/streams' "
		    "xmlns='jabber:client' to='%s' version='1.0'>", host);
		seen = BIO_read(sbio, mbuf, BUFSIZZ);
		mbuf[seen] = 0;
		while (!strstr(mbuf, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'")) {
			if (strstr(mbuf, "/stream:features>"))
				goto shut;
			seen = BIO_read(sbio, mbuf, BUFSIZZ);
			mbuf[seen] = 0;
		}
		BIO_printf(sbio, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'/>");
		seen = BIO_read(sbio, sbuf, BUFSIZZ);
		sbuf[seen] = 0;
		if (!strstr(sbuf, "<proceed"))
			goto shut;
		mbuf[0] = 0;
	}
	for (;;) {
		FD_ZERO(&readfds);
		FD_ZERO(&writefds);

		if ((SSL_version(con) == DTLS1_VERSION) &&
		    DTLSv1_get_timeout(con, &timeout))
			timeoutp = &timeout;
		else
			timeoutp = NULL;

		if (SSL_in_init(con) && !SSL_total_renegotiations(con)) {
			in_init = 1;
			tty_on = 0;
		} else {
			tty_on = 1;
			if (in_init) {
				in_init = 0;
				if (sess_out) {
					BIO *stmp = BIO_new_file(sess_out, "w");
					if (stmp) {
						PEM_write_bio_SSL_SESSION(stmp, SSL_get_session(con));
						BIO_free(stmp);
					} else
						BIO_printf(bio_err, "Error writing session file %s\n", sess_out);
				}
				print_stuff(bio_c_out, con, full_log);
				if (full_log > 0)
					full_log--;

				if (starttls_proto) {
					BIO_write(bio_err, mbuf, mbuf_len);
					/* We don't need to know any more */
					starttls_proto = PROTO_OFF;
				}
				if (reconnect) {
					reconnect--;
					BIO_printf(bio_c_out, "drop connection and then reconnect\n");
					SSL_shutdown(con);
					SSL_set_connect_state(con);
					shutdown(SSL_get_fd(con), SHUT_RD);
					close(SSL_get_fd(con));
					goto re_start;
				}
			}
		}

		ssl_pending = read_ssl && SSL_pending(con);

		/* XXX should add tests for fd_set overflow */

		if (!ssl_pending) {
			if (tty_on) {
				if (read_tty)
					FD_SET(fileno(stdin), &readfds);
				if (write_tty)
					FD_SET(fileno(stdout), &writefds);
			}
			if (read_ssl)
				FD_SET(SSL_get_fd(con), &readfds);
			if (write_ssl)
				FD_SET(SSL_get_fd(con), &writefds);
/*			printf("mode tty(%d %d%d) ssl(%d%d)\n",
				tty_on,read_tty,write_tty,read_ssl,write_ssl);*/

			i = select(width, &readfds, &writefds,
			    NULL, timeoutp);
			if (i < 0) {
				BIO_printf(bio_err, "bad select %d\n",
				    errno);
				goto shut;
				/* goto end; */
			}
		}
		if ((SSL_version(con) == DTLS1_VERSION) && DTLSv1_handle_timeout(con) > 0) {
			BIO_printf(bio_err, "TIMEOUT occured\n");
		}
		if (!ssl_pending && FD_ISSET(SSL_get_fd(con), &writefds)) {
			k = SSL_write(con, &(cbuf[cbuf_off]),
			    (unsigned int) cbuf_len);
			switch (SSL_get_error(con, k)) {
			case SSL_ERROR_NONE:
				cbuf_off += k;
				cbuf_len -= k;
				if (k <= 0)
					goto end;
				/* we have done a  write(con,NULL,0); */
				if (cbuf_len <= 0) {
					read_tty = 1;
					write_ssl = 0;
				} else {	/* if (cbuf_len > 0) */
					read_tty = 0;
					write_ssl = 1;
				}
				break;
			case SSL_ERROR_WANT_WRITE:
				BIO_printf(bio_c_out, "write W BLOCK\n");
				write_ssl = 1;
				read_tty = 0;
				break;
			case SSL_ERROR_WANT_READ:
				BIO_printf(bio_c_out, "write R BLOCK\n");
				write_tty = 0;
				read_ssl = 1;
				write_ssl = 0;
				break;
			case SSL_ERROR_WANT_X509_LOOKUP:
				BIO_printf(bio_c_out, "write X BLOCK\n");
				break;
			case SSL_ERROR_ZERO_RETURN:
				if (cbuf_len != 0) {
					BIO_printf(bio_c_out, "shutdown\n");
					ret = 0;
					goto shut;
				} else {
					read_tty = 1;
					write_ssl = 0;
					break;
				}

			case SSL_ERROR_SYSCALL:
				if ((k != 0) || (cbuf_len != 0)) {
					BIO_printf(bio_err, "write:errno=%d\n",
					    errno);
					goto shut;
				} else {
					read_tty = 1;
					write_ssl = 0;
				}
				break;
			case SSL_ERROR_SSL:
				ERR_print_errors(bio_err);
				goto shut;
			}
		} else if (!ssl_pending && FD_ISSET(fileno(stdout), &writefds)) {
			i = write(fileno(stdout), &(sbuf[sbuf_off]), sbuf_len);

			if (i <= 0) {
				BIO_printf(bio_c_out, "DONE\n");
				ret = 0;
				goto shut;
				/* goto end; */
			}
			sbuf_len -= i;
			sbuf_off += i;
			if (sbuf_len <= 0) {
				read_ssl = 1;
				write_tty = 0;
			}
		} else if (ssl_pending || FD_ISSET(SSL_get_fd(con), &readfds)) {
#ifdef RENEG
			{
				static int iiii;
				if (++iiii == 52) {
					SSL_renegotiate(con);
					iiii = 0;
				}
			}
#endif
			k = SSL_read(con, sbuf, 1024 /* BUFSIZZ */ );

			switch (SSL_get_error(con, k)) {
			case SSL_ERROR_NONE:
				if (k <= 0)
					goto end;
				sbuf_off = 0;
				sbuf_len = k;

				read_ssl = 0;
				write_tty = 1;
				break;
			case SSL_ERROR_WANT_WRITE:
				BIO_printf(bio_c_out, "read W BLOCK\n");
				write_ssl = 1;
				read_tty = 0;
				break;
			case SSL_ERROR_WANT_READ:
				BIO_printf(bio_c_out, "read R BLOCK\n");
				write_tty = 0;
				read_ssl = 1;
				if ((read_tty == 0) && (write_ssl == 0))
					write_ssl = 1;
				break;
			case SSL_ERROR_WANT_X509_LOOKUP:
				BIO_printf(bio_c_out, "read X BLOCK\n");
				break;
			case SSL_ERROR_SYSCALL:
				ret = errno;
				BIO_printf(bio_err, "read:errno=%d\n", ret);
				goto shut;
			case SSL_ERROR_ZERO_RETURN:
				BIO_printf(bio_c_out, "closed\n");
				ret = 0;
				goto shut;
			case SSL_ERROR_SSL:
				ERR_print_errors(bio_err);
				goto shut;
				/* break; */
			}
		} else if (FD_ISSET(fileno(stdin), &readfds)) {
			if (crlf) {
				int j, lf_num;

				i = read(fileno(stdin), cbuf, BUFSIZZ / 2);
				lf_num = 0;
				/* both loops are skipped when i <= 0 */
				for (j = 0; j < i; j++)
					if (cbuf[j] == '\n')
						lf_num++;
				for (j = i - 1; j >= 0; j--) {
					cbuf[j + lf_num] = cbuf[j];
					if (cbuf[j] == '\n') {
						lf_num--;
						i++;
						cbuf[j + lf_num] = '\r';
					}
				}
				assert(lf_num == 0);
			} else
				i = read(fileno(stdin), cbuf, BUFSIZZ);

			if ((!c_ign_eof) && ((i <= 0) || (cbuf[0] == 'Q'))) {
				BIO_printf(bio_err, "DONE\n");
				ret = 0;
				goto shut;
			}
			if ((!c_ign_eof) && (cbuf[0] == 'R')) {
				BIO_printf(bio_err, "RENEGOTIATING\n");
				SSL_renegotiate(con);
				cbuf_len = 0;
			} else {
				cbuf_len = i;
				cbuf_off = 0;
			}

			write_ssl = 1;
			read_tty = 0;
		}
	}

	ret = 0;
shut:
	if (in_init)
		print_stuff(bio_c_out, con, full_log);
	SSL_shutdown(con);
	shutdown(SSL_get_fd(con), SHUT_RD);
	close(SSL_get_fd(con));
end:
	if (con != NULL) {
		if (prexit != 0)
			print_stuff(bio_c_out, con, 1);
		SSL_free(con);
	}
#if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
	free(next_proto.data);
#endif
	if (ctx != NULL)
		SSL_CTX_free(ctx);
	if (cert)
		X509_free(cert);
	if (key)
		EVP_PKEY_free(key);
	free(pass);
	if (vpm)
		X509_VERIFY_PARAM_free(vpm);
	if (cbuf != NULL) {
		OPENSSL_cleanse(cbuf, BUFSIZZ);
		free(cbuf);
	}
	if (sbuf != NULL) {
		OPENSSL_cleanse(sbuf, BUFSIZZ);
		free(sbuf);
	}
	if (mbuf != NULL) {
		OPENSSL_cleanse(mbuf, BUFSIZZ);
		free(mbuf);
	}
	if (bio_c_out != NULL) {
		BIO_free(bio_c_out);
		bio_c_out = NULL;
	}

	return (ret);
}
示例#18
0
static int test_tls13ccs(int tst)
{
    SSL_CTX *sctx = NULL, *cctx = NULL;
    SSL *sssl = NULL, *cssl = NULL;
    int ret = 0;
    const char msg[] = "Dummy data";
    char buf[80];
    size_t written, readbytes;
    SSL_SESSION *sess = NULL;

    chseen = shseen = sccsseen = ccsaftersh = ccsbeforesh = 0;
    sappdataseen = cappdataseen = badccs = badvers = badsessid = 0;
    chsessidlen = 0;

    if (!TEST_true(create_ssl_ctx_pair(TLS_server_method(), TLS_client_method(),
                                       TLS1_VERSION, 0,
                                       &sctx, &cctx, cert, privkey))
        || !TEST_true(SSL_CTX_set_max_early_data(sctx,
                                                 SSL3_RT_MAX_PLAIN_LENGTH)))
        goto err;

    /*
     * Test 0: Simple Handshake
     * Test 1: Simple Handshake, client middlebox compat mode disabled
     * Test 2: Simple Handshake, server middlebox compat mode disabled
     * Test 3: HRR Handshake
     * Test 4: HRR Handshake, client middlebox compat mode disabled
     * Test 5: HRR Handshake, server middlebox compat mode disabled
     * Test 6: Early data handshake
     * Test 7: Early data handshake, client middlebox compat mode disabled
     * Test 8: Early data handshake, server middlebox compat mode disabled
     * Test 9: Early data then HRR
     * Test 10: Early data then HRR, client middlebox compat mode disabled
     * Test 11: Early data then HRR, server middlebox compat mode disabled
     */
    switch (tst) {
    case 0:
    case 3:
    case 6:
    case 9:
        break;
    case 1:
    case 4:
    case 7:
    case 10:
        SSL_CTX_clear_options(cctx, SSL_OP_ENABLE_MIDDLEBOX_COMPAT);
        break;
    case 2:
    case 5:
    case 8:
    case 11:
        SSL_CTX_clear_options(sctx, SSL_OP_ENABLE_MIDDLEBOX_COMPAT);
        break;
    default:
        TEST_error("Invalid test value");
        goto err;
    }

    if (tst >= 6) {
        /* Get a session suitable for early_data */
        if (!TEST_true(create_ssl_objects(sctx, cctx, &sssl, &cssl, NULL, NULL))
                || !TEST_true(create_ssl_connection(sssl, cssl, SSL_ERROR_NONE)))
            goto err;
        sess = SSL_get1_session(cssl);
        if (!TEST_ptr(sess))
            goto err;
        SSL_shutdown(cssl);
        SSL_shutdown(sssl);
        SSL_free(sssl);
        SSL_free(cssl);
        sssl = cssl = NULL;
    }

    if ((tst >= 3 && tst <= 5) || tst >= 9) {
        /* HRR handshake */
        if (!TEST_true(SSL_CTX_set1_groups_list(sctx, "P-256")))
            goto err;
    }

    s_to_c_fbio = BIO_new(bio_f_watchccs_filter());
    c_to_s_fbio = BIO_new(bio_f_watchccs_filter());
    if (!TEST_ptr(s_to_c_fbio)
            || !TEST_ptr(c_to_s_fbio)) {
        BIO_free(s_to_c_fbio);
        BIO_free(c_to_s_fbio);
        goto err;
    }

    /* BIOs get freed on error */
    if (!TEST_true(create_ssl_objects(sctx, cctx, &sssl, &cssl, s_to_c_fbio,
                                      c_to_s_fbio)))
        goto err;

    if (tst >= 6) {
        /* Early data */
        if (!TEST_true(SSL_set_session(cssl, sess))
                || !TEST_true(SSL_write_early_data(cssl, msg, strlen(msg),
                                                   &written))
                || (tst <= 8
                    && !TEST_int_eq(SSL_read_early_data(sssl, buf,  sizeof(buf),
                                                &readbytes),
                                                SSL_READ_EARLY_DATA_SUCCESS)))
            goto err;
        if (tst <= 8) {
            if (!TEST_int_gt(SSL_connect(cssl), 0))
                goto err;
        } else {
            if (!TEST_int_le(SSL_connect(cssl), 0))
                goto err;
        }
        if (!TEST_int_eq(SSL_read_early_data(sssl, buf,  sizeof(buf),
                                             &readbytes),
                         SSL_READ_EARLY_DATA_FINISH))
            goto err;
    }

    /* Perform handshake (or complete it if doing early data ) */
    if (!TEST_true(create_ssl_connection(sssl, cssl, SSL_ERROR_NONE)))
        goto err;

    /*
     * Check there were no unexpected CCS messages, all record versions
     * were as expected, and that the session ids were reflected by the server
     * correctly.
     */
    if (!TEST_false(badccs) || !TEST_false(badvers) || !TEST_false(badsessid))
        goto err;

    switch (tst) {
    case 0:
        if (!TEST_true(sccsseen)
                || !TEST_true(ccsaftersh)
                || !TEST_false(ccsbeforesh)
                || !TEST_size_t_gt(chsessidlen, 0))
            goto err;
        break;

    case 1:
        if (!TEST_true(sccsseen)
                || !TEST_false(ccsaftersh)
                || !TEST_false(ccsbeforesh)
                || !TEST_size_t_eq(chsessidlen, 0))
            goto err;
        break;

    case 2:
        if (!TEST_false(sccsseen)
                || !TEST_true(ccsaftersh)
                || !TEST_false(ccsbeforesh)
                || !TEST_size_t_gt(chsessidlen, 0))
            goto err;
        break;

    case 3:
        if (!TEST_true(sccsseen)
                || !TEST_true(ccsaftersh)
                || !TEST_false(ccsbeforesh)
                || !TEST_size_t_gt(chsessidlen, 0))
            goto err;
        break;

    case 4:
        if (!TEST_true(sccsseen)
                || !TEST_false(ccsaftersh)
                || !TEST_false(ccsbeforesh)
                || !TEST_size_t_eq(chsessidlen, 0))
            goto err;
        break;

    case 5:
        if (!TEST_false(sccsseen)
                || !TEST_true(ccsaftersh)
                || !TEST_false(ccsbeforesh)
                || !TEST_size_t_gt(chsessidlen, 0))
            goto err;
        break;

    case 6:
        if (!TEST_true(sccsseen)
                || !TEST_false(ccsaftersh)
                || !TEST_true(ccsbeforesh)
                || !TEST_size_t_gt(chsessidlen, 0))
            goto err;
        break;

    case 7:
        if (!TEST_true(sccsseen)
                || !TEST_false(ccsaftersh)
                || !TEST_false(ccsbeforesh)
                || !TEST_size_t_eq(chsessidlen, 0))
            goto err;
        break;

    case 8:
        if (!TEST_false(sccsseen)
                || !TEST_false(ccsaftersh)
                || !TEST_true(ccsbeforesh)
                || !TEST_size_t_gt(chsessidlen, 0))
            goto err;
        break;

    case 9:
        if (!TEST_true(sccsseen)
                || !TEST_false(ccsaftersh)
                || !TEST_true(ccsbeforesh)
                || !TEST_size_t_gt(chsessidlen, 0))
            goto err;
        break;

    case 10:
        if (!TEST_true(sccsseen)
                || !TEST_false(ccsaftersh)
                || !TEST_false(ccsbeforesh)
                || !TEST_size_t_eq(chsessidlen, 0))
            goto err;
        break;

    case 11:
        if (!TEST_false(sccsseen)
                || !TEST_false(ccsaftersh)
                || !TEST_true(ccsbeforesh)
                || !TEST_size_t_gt(chsessidlen, 0))
            goto err;
        break;

    default:
        TEST_error("Invalid test value");
        goto err;
    }

    ret = 1;
 err:
    SSL_SESSION_free(sess);
    SSL_free(sssl);
    SSL_free(cssl);
    SSL_CTX_free(sctx);
    SSL_CTX_free(cctx);

    return ret;
}
示例#19
0
int main(int argc, char *argv[])
{
    BIO *err;
    int testresult = 0;
    int currtest = 0;

    SSL_library_init();
    SSL_load_error_strings();

    err = BIO_new_fp(stderr, BIO_NOCLOSE | BIO_FP_TEXT);

    CRYPTO_malloc_debug_init();
    CRYPTO_set_mem_debug_options(V_CRYPTO_MDEBUG_ALL);
    CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);


    confctx = SSL_CONF_CTX_new();
    ctx = SSL_CTX_new(SSLv23_method());
    ssl = SSL_new(ctx);
    if (confctx == NULL || ctx == NULL)
        goto end;

    SSL_CONF_CTX_set_flags(confctx, SSL_CONF_FLAG_FILE
                                    | SSL_CONF_FLAG_CLIENT
                                    | SSL_CONF_FLAG_SERVER);

    /*
     * For each test set up an SSL_CTX and SSL and see whether SSLv2 is enabled
     * as expected after various SSL_CONF_cmd("Protocol", ...) calls.
     */
    for (currtest = 0; currtest < TOTAL_NUM_TESTS; currtest++) {
        BIO_printf(err, "SSLv2 CONF Test number %d\n", currtest);
        if (currtest == TEST_SSL_CTX)
            SSL_CONF_CTX_set_ssl_ctx(confctx, ctx);
        else
            SSL_CONF_CTX_set_ssl(confctx, ssl);

        /* SSLv2 should be off by default */
        if (!checksslv2(currtest, SSLV2OFF)) {
            BIO_printf(err, "SSLv2 CONF Test: Off by default test FAIL\n");
            goto end;
        }

        if (SSL_CONF_cmd(confctx, "Protocol", "ALL") != 2
                || !SSL_CONF_CTX_finish(confctx)) {
            BIO_printf(err, "SSLv2 CONF Test: SSL_CONF command FAIL\n");
            goto end;
        }

        /* Should still be off even after ALL Protocols on */
        if (!checksslv2(currtest, SSLV2OFF)) {
            BIO_printf(err, "SSLv2 CONF Test: Off after config #1 FAIL\n");
            goto end;
        }

        if (SSL_CONF_cmd(confctx, "Protocol", "SSLv2") != 2
                || !SSL_CONF_CTX_finish(confctx)) {
            BIO_printf(err, "SSLv2 CONF Test: SSL_CONF command FAIL\n");
            goto end;
        }

        /* Should still be off even if explicitly asked for */
        if (!checksslv2(currtest, SSLV2OFF)) {
            BIO_printf(err, "SSLv2 CONF Test: Off after config #2 FAIL\n");
            goto end;
        }

        if (SSL_CONF_cmd(confctx, "Protocol", "-SSLv2") != 2
                || !SSL_CONF_CTX_finish(confctx)) {
            BIO_printf(err, "SSLv2 CONF Test: SSL_CONF command FAIL\n");;
            goto end;
        }

        if (!checksslv2(currtest, SSLV2OFF)) {
            BIO_printf(err, "SSLv2 CONF Test: Off after config #3 FAIL\n");
            goto end;
        }

        if (currtest == TEST_SSL_CTX)
            SSL_CTX_clear_options(ctx, SSL_OP_NO_SSLv2);
        else
            SSL_clear_options(ssl, SSL_OP_NO_SSLv2);

        if (!checksslv2(currtest, SSLV2ON)) {
            BIO_printf(err, "SSLv2 CONF Test: On after clear FAIL\n");
            goto end;
        }

        if (SSL_CONF_cmd(confctx, "Protocol", "ALL") != 2
                || !SSL_CONF_CTX_finish(confctx)) {
            BIO_printf(err, "SSLv2 CONF Test: SSL_CONF command FAIL\n");
            goto end;
        }

        /* Option has been cleared and config says have SSLv2 so should be on */
        if (!checksslv2(currtest, SSLV2ON)) {
            BIO_printf(err, "SSLv2 CONF Test: On after config #1 FAIL\n");
            goto end;
        }

        if (SSL_CONF_cmd(confctx, "Protocol", "SSLv2") != 2
                || !SSL_CONF_CTX_finish(confctx)) {
            BIO_printf(err, "SSLv2 CONF Test: SSL_CONF command FAIL\n");
            goto end;
        }

        /* Option has been cleared and config says have SSLv2 so should be on */
        if (!checksslv2(currtest, SSLV2ON)) {
            BIO_printf(err, "SSLv2 CONF Test: On after config #2 FAIL\n");
            goto end;
        }

        if (SSL_CONF_cmd(confctx, "Protocol", "-SSLv2") != 2
                || !SSL_CONF_CTX_finish(confctx)) {
            BIO_printf(err, "SSLv2 CONF Test: SSL_CONF command FAIL\n");
            goto end;
        }

        /* Option has been cleared but config says no SSLv2 so should be off */
        if (!checksslv2(currtest, SSLV2OFF)) {
            BIO_printf(err, "SSLv2 CONF Test: Off after config #4 FAIL\n");
            goto end;
        }

    }

    testresult = 1;

 end:
    SSL_free(ssl);
    SSL_CTX_free(ctx);
    SSL_CONF_CTX_free(confctx);

    if (!testresult) {
        printf("SSLv2 CONF test: FAILED (Test %d)\n", currtest);
        ERR_print_errors(err);
    } else {
        printf("SSLv2 CONF test: PASSED\n");
    }

    ERR_free_strings();
    ERR_remove_thread_state(NULL);
    EVP_cleanup();
    CRYPTO_cleanup_all_ex_data();
    CRYPTO_mem_leaks(err);
    BIO_free(err);

    return testresult ? EXIT_SUCCESS : EXIT_FAILURE;
}
示例#20
0
文件: tls.c 项目: bamarni/pure-ftpd
int tls_init_library(void)
{
    unsigned int rnd;

    tls_cnx_handshook = 0;
    tls_data_cnx_handshook = 0;
    SSL_library_init();
    SSL_load_error_strings();
    OpenSSL_add_all_algorithms();
    while (RAND_status() == 0) {
        rnd = zrand();
        RAND_seed(&rnd, (int) sizeof rnd);
    }
    if ((tls_ctx = SSL_CTX_new(SSLv23_server_method())) == NULL) {
        tls_error(__LINE__, 0);
    }
# ifdef SSL_OP_CIPHER_SERVER_PREFERENCE
    SSL_CTX_set_options(tls_ctx, SSL_OP_CIPHER_SERVER_PREFERENCE);
# endif
# ifdef SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
    SSL_CTX_set_options(tls_ctx,
                        SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION);
# endif
    SSL_CTX_set_options(tls_ctx, SSL_OP_NO_SSLv2);
    SSL_CTX_set_options(tls_ctx, SSL_OP_NO_SSLv3);
# ifdef SSL_OP_NO_TLSv1
    SSL_CTX_clear_options(tls_ctx, SSL_OP_NO_TLSv1);
# endif
# ifdef SSL_OP_NO_TLSv1_1
    SSL_CTX_clear_options(tls_ctx, SSL_OP_NO_TLSv1_1);
# endif
# ifdef SSL_OP_NO_TLSv1_2
    SSL_CTX_clear_options(tls_ctx, SSL_OP_NO_TLSv1_2);
# endif
    if (tlsciphersuite != NULL) {
        if (SSL_CTX_set_cipher_list(tls_ctx, tlsciphersuite) != 1) {
            logfile(LOG_ERR, MSG_TLS_CIPHER_FAILED, tlsciphersuite);
            _EXIT(EXIT_FAILURE);
        }
    }
    if (SSL_CTX_use_certificate_chain_file(tls_ctx, cert_file) != 1) {
        die(421, LOG_ERR,
            MSG_FILE_DOESNT_EXIST ": [%s]", cert_file);
    }
    if (SSL_CTX_use_PrivateKey_file(tls_ctx, cert_file,
                                    SSL_FILETYPE_PEM) != 1) {
        tls_error(__LINE__, 0);
    }
    if (SSL_CTX_check_private_key(tls_ctx) != 1) {
        tls_error(__LINE__, 0);
    }
    tls_init_cache();
# ifdef SSL_CTRL_SET_ECDH_AUTO
    SSL_CTX_ctrl(tls_ctx, SSL_CTRL_SET_ECDH_AUTO, 1, NULL);
# else
    tls_init_ecdh_curve();
# endif
# ifdef SSL_CTRL_SET_DH_AUTO
    if (tls_init_dhparams() != 0) {
        SSL_CTX_ctrl(tls_ctx, SSL_CTRL_SET_DH_AUTO, 1, NULL);
    }
# else
    if (tls_init_dhparams() != 0) {
        tls_init_dhparams_default();
    }
# endif
# ifdef DISABLE_SSL_RENEGOTIATION
    SSL_CTX_set_info_callback(tls_ctx, ssl_info_cb);
# endif
    SSL_CTX_set_verify_depth(tls_ctx, 6);
    if (ssl_verify_client_cert) {
        SSL_CTX_set_verify(tls_ctx, SSL_VERIFY_FAIL_IF_NO_PEER_CERT |
                           SSL_VERIFY_PEER, NULL);
        if (SSL_CTX_load_verify_locations(tls_ctx, cert_file, NULL) != 1) {
            tls_error(__LINE__, 0);
        }
    }
    return 0;
}
示例#21
0
/*
    Create and initialize an SSL configuration for a route. This configuration is used by all requests for
    a given route. An application can have different SSL configurations for different routes. There is also
    a default SSL configuration that is used when a route does not define a configuration and one for clients.
 */
static int configOss(MprSsl *ssl, int flags, char **errorMsg)
{
    OpenConfig      *cfg;
    X509_STORE      *store;
    SSL_CTX         *ctx;
    cchar           *key;
    uchar           resume[16];
    int             verifyMode;

    assert(ssl);
    if (ssl->config && !ssl->changed) {
        return 0;
    }
    if ((ssl->config = mprAllocObj(OpenConfig, manageOpenConfig)) == 0) {
        return MPR_ERR_MEMORY;
    }
    cfg = ssl->config;

    if ((ctx = SSL_CTX_new(SSLv23_method())) == 0) {
        mprLog("error openssl", 0, "Unable to create SSL context");
        return MPR_ERR_CANT_INITIALIZE;
    }
    SSL_CTX_set_app_data(ctx, (void*) ssl);

    if (ssl->verifyPeer && !(ssl->caFile || ssl->caPath)) {
        *errorMsg = sfmt("Cannot verify peer due to undefined CA certificates");
        SSL_CTX_free(ctx);
        return MPR_ERR_CANT_INITIALIZE;
    }

    /*
        Configure the certificates
     */
    if (ssl->certFile) {
        if (setCertFile(ctx, ssl->certFile) < 0) {
            SSL_CTX_free(ctx);
            return MPR_ERR_CANT_INITIALIZE;
        }
        key = (ssl->keyFile == 0) ? ssl->certFile : ssl->keyFile;
        if (key) {
            if (setKeyFile(ctx, key) < 0) {
                SSL_CTX_free(ctx);
                return MPR_ERR_CANT_INITIALIZE;
            }
            if (!SSL_CTX_check_private_key(ctx)) {
                mprLog("error openssl", 0, "Check of private key file failed: %s", key);
                SSL_CTX_free(ctx);
                return MPR_ERR_CANT_INITIALIZE;
            }
        }
    }
    if (ssl->ciphers) {
        ssl->ciphers = mapCipherNames(ssl->ciphers);
    }
    if (!ssl->ciphers && (flags & MPR_SOCKET_SERVER)) {
        ssl->ciphers = sclone(OPENSSL_DEFAULT_CIPHERS);
    }
    if (ssl->ciphers) {
        mprLog("info openssl", 5, "Using SSL ciphers: %s", ssl->ciphers);
        if (SSL_CTX_set_cipher_list(ctx, ssl->ciphers) != 1) {
            *errorMsg = sfmt("Unable to set cipher list \"%s\"", ssl->ciphers);
            SSL_CTX_free(ctx);
            return MPR_ERR_CANT_INITIALIZE;
        }
    }
    verifyMode = ssl->verifyPeer ? SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT : SSL_VERIFY_NONE;
    if (verifyMode != SSL_VERIFY_NONE) {
        if (!(ssl->caFile || ssl->caPath)) {
            *errorMsg = sclone("No defined certificate authority file");
            SSL_CTX_free(ctx);
            return MPR_ERR_CANT_INITIALIZE;
        }
        if ((!SSL_CTX_load_verify_locations(ctx, (char*) ssl->caFile, (char*) ssl->caPath)) ||
                (!SSL_CTX_set_default_verify_paths(ctx))) {
            *errorMsg = sfmt("Unable to set certificate locations: %s: %s", ssl->caFile, ssl->caPath);
            SSL_CTX_free(ctx);
            return MPR_ERR_CANT_INITIALIZE;
        }
        if (ssl->caFile) {
            STACK_OF(X509_NAME) *certNames;
            certNames = SSL_load_client_CA_file(ssl->caFile);
            if (certNames) {
                /*
                    Define the list of CA certificates to send to the client
                    before they send their client certificate for validation
                 */
                SSL_CTX_set_client_CA_list(ctx, certNames);
            }
        }
        store = SSL_CTX_get_cert_store(ctx);
        if (ssl->revoke && !X509_STORE_load_locations(store, ssl->revoke, 0)) {
            mprLog("error openssl", 0, "Cannot load certificate revoke list: %s", ssl->revoke);
            SSL_CTX_free(ctx);
            return MPR_ERR_CANT_INITIALIZE;
        }
        if (flags & MPR_SOCKET_SERVER) {
            SSL_CTX_set_verify_depth(ctx, ssl->verifyDepth);
        }
    }

    /*
        Define callbacks
     */
    SSL_CTX_set_verify(ctx, verifyMode, verifyPeerCertificate);
    if (flags & MPR_SOCKET_SERVER) {
        SSL_CTX_set_tlsext_servername_callback(ctx, sniHostname);
    }

    /*
        Configure DH parameters
     */
    SSL_CTX_set_tmp_dh_callback(ctx, dhcallback);
    cfg->dhKey = getDhKey();

    /*
        Define default OpenSSL options
        Ensure we generate a new private key for each connection
        Disable SSLv2 and SSLv3 by default -- they are insecure.
     */
    cfg->setFlags = SSL_OP_ALL | SSL_OP_SINGLE_DH_USE | SSL_OP_SINGLE_ECDH_USE | SSL_OP_NO_SSLv2 | SSL_OP_NO_SSLv3;
#ifdef SSL_OP_NO_TLSv1
    if (!(ssl->protocols & MPR_PROTO_TLSV1)) {
        cfg->setFlags |= SSL_OP_NO_TLSv1;
    }
#endif
#ifdef SSL_OP_NO_TLSv1_1
    if (!(ssl->protocols & MPR_PROTO_TLSV1_1)) {
        cfg->setFlags |= SSL_OP_NO_TLSv1_1;
    }
#endif
#ifdef SSL_OP_NO_TLSv1_2
    if (!(ssl->protocols & MPR_PROTO_TLSV1_2)) {
        cfg->setFlags |= SSL_OP_NO_TLSv1_2;
    }
#endif
#ifdef SSL_OP_MSIE_SSLV2_RSA_PADDING
    cfg->setFlags |= SSL_OP_MSIE_SSLV2_RSA_PADDING;
#endif
#if defined(SSL_OP_NO_TICKET)
    /*
        Ticket based session reuse is enabled by default
     */
    #if defined(ME_MPR_SSL_TICKET)
        if (ME_MPR_SSL_TICKET) {
            cfg->clearFlags |= SSL_OP_NO_TICKET;
        } else {
            cfg->setFlags |= SSL_OP_NO_TICKET;
        }
    #else
        cfg->clearFlags |= SSL_OP_NO_TICKET;
    #endif
#endif

#if defined(SSL_OP_NO_COMPRESSION)
    /*
        CRIME attack targets compression
     */
    cfg->clearFlags |= SSL_OP_NO_COMPRESSION;
#endif

#if defined(SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION)
    /*
        Force a new session on renegotiation. Default to true.
        This is required when using SNI and changing context during the SSL hello
     */
    #if defined(ME_MPR_SSL_RENEGOTIATE)
        if (ME_MPR_SSL_RENEGOTIATE) {
            cfg->clearFlags |= SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION;
        } else {
            cfg->setFlags |= SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION;
        }
    #else
        cfg->setFlags |= SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION;
    #endif
#endif

#if defined(SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS)
    /*
        Disables a countermeasure against a SSL 3.0/TLS 1.0 protocol vulnerability affecting CBC ciphers.
        Defaults to true.
     */
    #if defined(ME_MPR_SSL_EMPTY_FRAGMENTS)
        if (ME_MPR_SSL_EMPTY_FRAGMENTS) {
            /* SSL_OP_ALL disables empty fragments. Only needed for ancient browsers like IE-6 on SSL-3.0/TLS-1.0 */
            cfg->clearFlags |= SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS;
        } else {
            cfg->setFlags |= SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS;
        }
    #else
        cfg->setFlags |= SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS;
    #endif
#endif

    /*
        Define a session reuse context
     */
    RAND_bytes(resume, sizeof(resume));
    SSL_CTX_set_session_id_context(ctx, resume, sizeof(resume));

    /*
        Elliptic Curve initialization
     */
#if SSL_OP_SINGLE_ECDH_USE
    #ifdef SSL_CTX_set_ecdh_auto
        /* This is supported in OpenSSL 1.0.2 */
        SSL_CTX_set_ecdh_auto(ctx, 1);
    #else
        {
            EC_KEY  *ecdh;
            cchar   *name;
            int      nid;

            name = ME_MPR_SSL_CURVE;
            if ((nid = OBJ_sn2nid(name)) == 0) {
                *errorMsg = sfmt("Unknown curve name \"%s\"", name);
                SSL_CTX_free(ctx);
                return MPR_ERR_CANT_INITIALIZE;
            }
            if ((ecdh = EC_KEY_new_by_curve_name(nid)) == 0) {
                *errorMsg = sfmt("Unable to create curve \"%s\"", name);
                SSL_CTX_free(ctx);
                return MPR_ERR_CANT_INITIALIZE;
            }
            SSL_CTX_set_tmp_ecdh(ctx, ecdh);
            EC_KEY_free(ecdh);
        }
    #endif
#endif

    SSL_CTX_set_mode(ctx, SSL_MODE_ENABLE_PARTIAL_WRITE | SSL_MODE_AUTO_RETRY | SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER);
#ifdef SSL_MODE_RELEASE_BUFFERS
    SSL_CTX_set_mode(ctx, SSL_MODE_RELEASE_BUFFERS);
#endif
#ifdef SSL_OP_CIPHER_SERVER_PREFERENCE
    SSL_CTX_set_mode(ctx, SSL_OP_CIPHER_SERVER_PREFERENCE);
#endif

#if defined(ME_MPR_SSL_CACHE)
    /*
        Set the number of sessions supported. Default in OpenSSL is 20K.
     */
    SSL_CTX_sess_set_cache_size(ctx, ME_MPR_SSL_CACHE);
#else
    SSL_CTX_sess_set_cache_size(ctx, 1024);
#endif

    SSL_CTX_set_options(ctx, cfg->setFlags);
    SSL_CTX_clear_options(ctx, cfg->clearFlags);

    cfg->ctx = ctx;
    ssl->changed = 0;
    ssl->config = cfg;
    return 0;
}
示例#22
0
int context_init(SERVICE_OPTIONS *section) { /* init SSL context */
    /* create SSL context */
    if(section->option.client)
        section->ctx=SSL_CTX_new(section->client_method);
    else /* server mode */
        section->ctx=SSL_CTX_new(section->server_method);
    if(!section->ctx) {
        sslerror("SSL_CTX_new");
        return 1; /* FAILED */
    }
    SSL_CTX_set_ex_data(section->ctx, index_opt, section); /* for callbacks */

    /* load certificate and private key to be verified by the peer server */
#if !defined(OPENSSL_NO_ENGINE) && OPENSSL_VERSION_NUMBER>=0x0090809fL
    /* SSL_CTX_set_client_cert_engine() was introduced in OpenSSL 0.9.8i */
    if(section->option.client && section->engine) {
        if(SSL_CTX_set_client_cert_engine(section->ctx, section->engine))
            s_log(LOG_INFO, "Client certificate engine (%s) enabled",
                ENGINE_get_id(section->engine));
        else /* no client certificate functionality in this engine */
            sslerror("SSL_CTX_set_client_cert_engine"); /* ignore error */
    }
#endif
    if(auth_init(section))
        return 1; /* FAILED */

    /* initialize verification of the peer server certificate */
    if(verify_init(section))
        return 1; /* FAILED */

    /* initialize DH/ECDH server mode */
    if(!section->option.client) {
#ifndef OPENSSL_NO_TLSEXT
        SSL_CTX_set_tlsext_servername_arg(section->ctx, section);
        SSL_CTX_set_tlsext_servername_callback(section->ctx, servername_cb);
#endif /* OPENSSL_NO_TLSEXT */
#ifndef OPENSSL_NO_DH
        dh_init(section); /* ignore the result (errors are not critical) */
#endif /* OPENSSL_NO_DH */
#ifndef OPENSSL_NO_ECDH
        ecdh_init(section); /* ignore the result (errors are not critical) */
#endif /* OPENSSL_NO_ECDH */
    }

    /* setup session cache */
    if(!section->option.client) {
        unsigned servname_len=(unsigned)strlen(section->servname);
        if(servname_len>SSL_MAX_SSL_SESSION_ID_LENGTH)
            servname_len=SSL_MAX_SSL_SESSION_ID_LENGTH;
        if(!SSL_CTX_set_session_id_context(section->ctx,
                (unsigned char *)section->servname, servname_len)) {
            sslerror("SSL_CTX_set_session_id_context");
            return 1; /* FAILED */
        }
    }
#ifdef SSL_SESS_CACHE_NO_INTERNAL_STORE
    /* the default cache mode is just SSL_SESS_CACHE_SERVER */
    SSL_CTX_set_session_cache_mode(section->ctx,
        SSL_SESS_CACHE_SERVER|SSL_SESS_CACHE_NO_INTERNAL_STORE);
#endif
    SSL_CTX_sess_set_cache_size(section->ctx, section->session_size);
    SSL_CTX_set_timeout(section->ctx, section->session_timeout);
    SSL_CTX_sess_set_new_cb(section->ctx, sess_new_cb);
    SSL_CTX_sess_set_get_cb(section->ctx, sess_get_cb);
    SSL_CTX_sess_set_remove_cb(section->ctx, sess_remove_cb);

    /* set info callback */
    SSL_CTX_set_info_callback(section->ctx, info_callback);

    /* ciphers, options, mode */
    if(section->cipher_list)
        if(!SSL_CTX_set_cipher_list(section->ctx, section->cipher_list)) {
            sslerror("SSL_CTX_set_cipher_list");
            return 1; /* FAILED */
        }
    SSL_CTX_set_options(section->ctx,
        (SSL_OPTIONS_TYPE)(section->ssl_options_set));
#if OPENSSL_VERSION_NUMBER>=0x009080dfL
    SSL_CTX_clear_options(section->ctx,
        (SSL_OPTIONS_TYPE)(section->ssl_options_clear));
    s_log(LOG_DEBUG, "SSL options: 0x%08lX (+0x%08lX, -0x%08lX)",
        SSL_CTX_get_options(section->ctx),
        section->ssl_options_set, section->ssl_options_clear);
#else /* OpenSSL older than 0.9.8m */
    s_log(LOG_DEBUG, "SSL options: 0x%08lX (+0x%08lX)",
        SSL_CTX_get_options(section->ctx),
        section->ssl_options_set);
#endif /* OpenSSL 0.9.8m or later */

    /* initialize OpenSSL CONF options */
    if(conf_init(section))
        return 1; /* FAILED */

#ifdef SSL_MODE_RELEASE_BUFFERS
    SSL_CTX_set_mode(section->ctx,
        SSL_MODE_ENABLE_PARTIAL_WRITE |
        SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER |
        SSL_MODE_RELEASE_BUFFERS);
#else
    SSL_CTX_set_mode(section->ctx,
        SSL_MODE_ENABLE_PARTIAL_WRITE |
        SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER);
#endif
    return 0; /* OK */
}
示例#23
0
/*
 * this may now get called after the vhost creation, when certs become
 * available.
 */
int
lws_tls_server_certs_load(struct lws_vhost *vhost, struct lws *wsi,
			  const char *cert, const char *private_key,
			  const char *mem_cert, size_t mem_cert_len,
			  const char *mem_privkey, size_t mem_privkey_len)
{
#if !defined(OPENSSL_NO_EC)
	const char *ecdh_curve = "prime256v1";
#if !defined(LWS_WITH_BORINGSSL) && defined(LWS_HAVE_SSL_EXTRA_CHAIN_CERTS)
	STACK_OF(X509) *extra_certs = NULL;
#endif
	EC_KEY *ecdh, *EC_key = NULL;
	EVP_PKEY *pkey;
	X509 *x = NULL;
	int ecdh_nid;
	int KeyType;
#endif
	unsigned long error;
	lws_filepos_t flen;
	uint8_t *p;
	int ret;

	int n = lws_tls_generic_cert_checks(vhost, cert, private_key), m;

	(void)ret;

	if (!cert && !private_key)
		n = LWS_TLS_EXTANT_ALTERNATIVE;

	if (n == LWS_TLS_EXTANT_NO && (!mem_cert || !mem_privkey))
		return 0;
	if (n == LWS_TLS_EXTANT_NO)
		n = LWS_TLS_EXTANT_ALTERNATIVE;

	if (n == LWS_TLS_EXTANT_ALTERNATIVE && (!mem_cert || !mem_privkey))
		return 1; /* no alternative */

	if (n == LWS_TLS_EXTANT_ALTERNATIVE) {

#if OPENSSL_VERSION_NUMBER >= 0x10100000L

		/*
		 * Although we have prepared update certs, we no longer have
		 * the rights to read our own cert + key we saved.
		 *
		 * If we were passed copies in memory buffers, use those
		 * in favour of the filepaths we normally want.
		 */
		cert = NULL;
		private_key = NULL;
	}

	/*
	 * use the multi-cert interface for backwards compatibility in the
	 * both simple files case
	 */

	if (n != LWS_TLS_EXTANT_ALTERNATIVE && cert) {

		/* set the local certificate from CertFile */
		m = SSL_CTX_use_certificate_chain_file(vhost->tls.ssl_ctx, cert);
		if (m != 1) {
			error = ERR_get_error();
			lwsl_err("problem getting cert '%s' %lu: %s\n",
				 cert, error, ERR_error_string(error,
				       (char *)vhost->context->pt[0].serv_buf));

			return 1;
		}

		if (private_key) {
			/* set the private key from KeyFile */
			if (SSL_CTX_use_PrivateKey_file(vhost->tls.ssl_ctx, private_key,
							SSL_FILETYPE_PEM) != 1) {
				error = ERR_get_error();
				lwsl_err("ssl problem getting key '%s' %lu: %s\n",
					 private_key, error,
					 ERR_error_string(error,
					      (char *)vhost->context->pt[0].serv_buf));
				return 1;
			}
		} else {
			if (vhost->protocols[0].callback(wsi,
				      LWS_CALLBACK_OPENSSL_CONTEXT_REQUIRES_PRIVATE_KEY,
							 vhost->tls.ssl_ctx, NULL, 0)) {
				lwsl_err("ssl private key not set\n");

				return 1;
			}
		}

		return 0;
	}

	/* otherwise allow for DER or PEM, file or memory image */

	if (lws_tls_alloc_pem_to_der_file(vhost->context, cert, mem_cert,
					  mem_cert_len, &p, &flen)) {
		lwsl_err("%s: couldn't read cert file\n", __func__);

		return 1;
	}

#if !defined(USE_WOLFSSL)
	ret = SSL_CTX_use_certificate_ASN1(vhost->tls.ssl_ctx, (int)flen, p);
#else
	ret = wolfSSL_CTX_use_certificate_buffer(vhost->tls.ssl_ctx,
						 (uint8_t *)p, (int)flen,
						 WOLFSSL_FILETYPE_ASN1);
#endif
	lws_free_set_NULL(p);
	if (ret != 1) {
		lwsl_err("%s: Problem loading cert\n", __func__);

		return 1;
	}

	if (lws_tls_alloc_pem_to_der_file(vhost->context, private_key,
					  mem_privkey, mem_privkey_len,
					  &p, &flen)) {
		lwsl_notice("unable to convert memory privkey\n");

		return 1;
	}

#if !defined(USE_WOLFSSL)
	ret = SSL_CTX_use_PrivateKey_ASN1(EVP_PKEY_RSA, vhost->tls.ssl_ctx, p,
					  (long)(long long)flen);
	if (ret != 1) {
		ret = SSL_CTX_use_PrivateKey_ASN1(EVP_PKEY_EC,
						  vhost->tls.ssl_ctx, p,
						  (long)(long long)flen);
	}
#else
	ret = wolfSSL_CTX_use_PrivateKey_buffer(vhost->tls.ssl_ctx, p, flen,
						WOLFSSL_FILETYPE_ASN1);
#endif
	lws_free_set_NULL(p);
	if (ret != 1)  {
		lwsl_notice("unable to use memory privkey\n");

		return 1;
	}

#else
		/*
		 * Although we have prepared update certs, we no longer have
		 * the rights to read our own cert + key we saved.
		 *
		 * If we were passed copies in memory buffers, use those
		 * instead.
		 *
		 * The passed memory-buffer cert image is in DER, and the
		 * memory-buffer private key image is PEM.
		 */
#ifndef USE_WOLFSSL
		if (SSL_CTX_use_certificate_ASN1(vhost->tls.ssl_ctx,
						 (int)mem_cert_len,
						 (uint8_t *)mem_cert) != 1) {
#else
		if (wolfSSL_CTX_use_certificate_buffer(vhost->tls.ssl_ctx,
						 (uint8_t *)mem_cert,
						 (int)mem_cert_len,
						 WOLFSSL_FILETYPE_ASN1) != 1) {

#endif
			lwsl_err("Problem loading update cert\n");

			return 1;
		}

		if (lws_tls_alloc_pem_to_der_file(vhost->context, NULL,
						  mem_privkey, mem_privkey_len,
						  &p, &flen)) {
			lwsl_notice("unable to convert memory privkey\n");

			return 1;
		}
#ifndef USE_WOLFSSL
		if (SSL_CTX_use_PrivateKey_ASN1(EVP_PKEY_RSA,
						vhost->tls.ssl_ctx, p,
						(long)(long long)flen) != 1) {
#else
		if (wolfSSL_CTX_use_PrivateKey_buffer(vhost->tls.ssl_ctx, p,
					    flen, WOLFSSL_FILETYPE_ASN1) != 1) {
#endif
			lwsl_notice("unable to use memory privkey\n");

			return 1;
		}

		goto check_key;
	}

	/* set the local certificate from CertFile */
	m = SSL_CTX_use_certificate_chain_file(vhost->tls.ssl_ctx, cert);
	if (m != 1) {
		error = ERR_get_error();
		lwsl_err("problem getting cert '%s' %lu: %s\n",
			 cert, error, ERR_error_string(error,
			       (char *)vhost->context->pt[0].serv_buf));

		return 1;
	}

	if (n != LWS_TLS_EXTANT_ALTERNATIVE && private_key) {
		/* set the private key from KeyFile */
		if (SSL_CTX_use_PrivateKey_file(vhost->tls.ssl_ctx, private_key,
					        SSL_FILETYPE_PEM) != 1) {
			error = ERR_get_error();
			lwsl_err("ssl problem getting key '%s' %lu: %s\n",
				 private_key, error,
				 ERR_error_string(error,
				      (char *)vhost->context->pt[0].serv_buf));
			return 1;
		}
	} else {
		if (vhost->protocols[0].callback(wsi,
			      LWS_CALLBACK_OPENSSL_CONTEXT_REQUIRES_PRIVATE_KEY,
						 vhost->tls.ssl_ctx, NULL, 0)) {
			lwsl_err("ssl private key not set\n");

			return 1;
		}
	}

check_key:
#endif

	/* verify private key */
	if (!SSL_CTX_check_private_key(vhost->tls.ssl_ctx)) {
		lwsl_err("Private SSL key doesn't match cert\n");

		return 1;
	}


#if !defined(OPENSSL_NO_EC)
	if (vhost->tls.ecdh_curve[0])
		ecdh_curve = vhost->tls.ecdh_curve;

	ecdh_nid = OBJ_sn2nid(ecdh_curve);
	if (NID_undef == ecdh_nid) {
		lwsl_err("SSL: Unknown curve name '%s'", ecdh_curve);
		return 1;
	}

	ecdh = EC_KEY_new_by_curve_name(ecdh_nid);
	if (NULL == ecdh) {
		lwsl_err("SSL: Unable to create curve '%s'", ecdh_curve);
		return 1;
	}
	SSL_CTX_set_tmp_ecdh(vhost->tls.ssl_ctx, ecdh);
	EC_KEY_free(ecdh);

	SSL_CTX_set_options(vhost->tls.ssl_ctx, SSL_OP_SINGLE_ECDH_USE);

	lwsl_notice(" SSL ECDH curve '%s'\n", ecdh_curve);

	if (lws_check_opt(vhost->context->options, LWS_SERVER_OPTION_SSL_ECDH))
		lwsl_notice(" Using ECDH certificate support\n");

	/* Get X509 certificate from ssl context */
#if !defined(LWS_WITH_BORINGSSL)
#if !defined(LWS_HAVE_SSL_EXTRA_CHAIN_CERTS)
	x = sk_X509_value(vhost->tls.ssl_ctx->extra_certs, 0);
#else
	SSL_CTX_get_extra_chain_certs_only(vhost->tls.ssl_ctx, &extra_certs);
	if (extra_certs)
		x = sk_X509_value(extra_certs, 0);
	else
		lwsl_info("%s: no extra certs\n", __func__);
#endif
	if (!x) {
		//lwsl_err("%s: x is NULL\n", __func__);
		goto post_ecdh;
	}
#else
	return 0;
#endif
	/* Get the public key from certificate */
	pkey = X509_get_pubkey(x);
	if (!pkey) {
		lwsl_err("%s: pkey is NULL\n", __func__);

		return 1;
	}
	/* Get the key type */
	KeyType = EVP_PKEY_type(EVP_PKEY_id(pkey));

	if (EVP_PKEY_EC != KeyType) {
		lwsl_notice("Key type is not EC\n");
		return 0;
	}
	/* Get the key */
	EC_key = EVP_PKEY_get1_EC_KEY(pkey);
	/* Set ECDH parameter */
	if (!EC_key) {
		lwsl_err("%s: ECDH key is NULL \n", __func__);
		return 1;
	}
	SSL_CTX_set_tmp_ecdh(vhost->tls.ssl_ctx, EC_key);

	EC_KEY_free(EC_key);
#else
	lwsl_notice(" OpenSSL doesn't support ECDH\n");
#endif
#if !defined(OPENSSL_NO_EC) && !defined(LWS_WITH_BORINGSSL)
post_ecdh:
#endif
	vhost->tls.skipped_certs = 0;

	return 0;
}

int
lws_tls_server_vhost_backend_init(const struct lws_context_creation_info *info,
				  struct lws_vhost *vhost, struct lws *wsi)
{
	unsigned long error;
	SSL_METHOD *method = (SSL_METHOD *)SSLv23_server_method();

	if (!method) {
		error = ERR_get_error();
		lwsl_err("problem creating ssl method %lu: %s\n",
				error, ERR_error_string(error,
				      (char *)vhost->context->pt[0].serv_buf));
		return 1;
	}
	vhost->tls.ssl_ctx = SSL_CTX_new(method);	/* create context */
	if (!vhost->tls.ssl_ctx) {
		error = ERR_get_error();
		lwsl_err("problem creating ssl context %lu: %s\n",
				error, ERR_error_string(error,
				      (char *)vhost->context->pt[0].serv_buf));
		return 1;
	}

	SSL_CTX_set_ex_data(vhost->tls.ssl_ctx,
			    openssl_SSL_CTX_private_data_index,
			    (char *)vhost->context);
	/* Disable SSLv2 and SSLv3 */
	SSL_CTX_set_options(vhost->tls.ssl_ctx, SSL_OP_NO_SSLv2 |
						SSL_OP_NO_SSLv3);
#ifdef SSL_OP_NO_COMPRESSION
	SSL_CTX_set_options(vhost->tls.ssl_ctx, SSL_OP_NO_COMPRESSION);
#endif
	SSL_CTX_set_options(vhost->tls.ssl_ctx, SSL_OP_SINGLE_DH_USE);
	SSL_CTX_set_options(vhost->tls.ssl_ctx, SSL_OP_CIPHER_SERVER_PREFERENCE);

	if (info->ssl_cipher_list)
		SSL_CTX_set_cipher_list(vhost->tls.ssl_ctx, info->ssl_cipher_list);

#if defined(LWS_HAVE_SSL_CTX_set_ciphersuites)
	if (info->tls1_3_plus_cipher_list)
		SSL_CTX_set_ciphersuites(vhost->tls.ssl_ctx,
					 info->tls1_3_plus_cipher_list);
#endif

#if !defined(OPENSSL_NO_TLSEXT)
	SSL_CTX_set_tlsext_servername_callback(vhost->tls.ssl_ctx,
					       lws_ssl_server_name_cb);
	SSL_CTX_set_tlsext_servername_arg(vhost->tls.ssl_ctx, vhost->context);
#endif

	if (info->ssl_ca_filepath &&
	    !SSL_CTX_load_verify_locations(vhost->tls.ssl_ctx,
					   info->ssl_ca_filepath, NULL)) {
		lwsl_err("%s: SSL_CTX_load_verify_locations unhappy\n",
			 __func__);
	}

	if (info->ssl_options_set)
		SSL_CTX_set_options(vhost->tls.ssl_ctx, info->ssl_options_set);

/* SSL_clear_options introduced in 0.9.8m */
#if (OPENSSL_VERSION_NUMBER >= 0x009080df) && !defined(USE_WOLFSSL)
	if (info->ssl_options_clear)
		SSL_CTX_clear_options(vhost->tls.ssl_ctx,
				      info->ssl_options_clear);
#endif

	lwsl_info(" SSL options 0x%lX\n",
			(unsigned long)SSL_CTX_get_options(vhost->tls.ssl_ctx));
	if (!vhost->tls.use_ssl ||
	    (!info->ssl_cert_filepath && !info->server_ssl_cert_mem))
		return 0;

	lws_ssl_bind_passphrase(vhost->tls.ssl_ctx, info);

	return lws_tls_server_certs_load(vhost, wsi, info->ssl_cert_filepath,
					 info->ssl_private_key_filepath,
					 info->server_ssl_cert_mem,
					 info->server_ssl_cert_mem_len,
					 info->server_ssl_private_key_mem,
					 info->server_ssl_private_key_mem_len);
}
示例#24
0
/* Init necessary structures for SSL in WebIf*/
SSL_CTX *SSL_Webif_Init(void)
{
	SSL_library_init();
	SSL_load_error_strings();
	ERR_load_BIO_strings();
	ERR_load_SSL_strings();

	SSL_CTX *ctx;

	static const char *cs_cert = "oscam.pem";

	if(pthread_key_create(&getssl, NULL))
	{
		cs_log("Could not create getssl");
	}

	// set locking callbacks for SSL
	int32_t i, num = CRYPTO_num_locks();
	lock_cs = (CS_MUTEX_LOCK *) OPENSSL_malloc(num * sizeof(CS_MUTEX_LOCK));

	for(i = 0; i < num; ++i)
	{
		cs_lock_create(&lock_cs[i], "ssl_lock_cs", 10000);
	}
	/* static lock callbacks */
	CRYPTO_set_id_callback(SSL_id_function);
	CRYPTO_set_locking_callback(SSL_locking_function);
	/* dynamic lock callbacks */
	CRYPTO_set_dynlock_create_callback(SSL_dyn_create_function);
	CRYPTO_set_dynlock_lock_callback(SSL_dyn_lock_function);
	CRYPTO_set_dynlock_destroy_callback(SSL_dyn_destroy_function);

	if(cfg.http_force_sslv3)
	{
		ctx = SSL_CTX_new(SSLv3_server_method());
#ifdef SSL_CTX_clear_options
		SSL_CTX_clear_options(ctx, SSL_OP_ALL); //we CLEAR all bug workarounds! This is for security reason
#else
		cs_log("WARNING: You enabled to force sslv3 but your system does not support to clear the ssl workarounds! SSL security will be reduced!");
#endif
		SSL_CTX_set_options(ctx, SSL_OP_NO_SSLv2); // we force SSL v3 !
		SSL_CTX_set_cipher_list(ctx, SSL_TXT_RC4);
	}
	else
		{ ctx = SSL_CTX_new(SSLv23_server_method()); }

	char path[128];

	if(!cfg.http_cert)
		{ get_config_filename(path, sizeof(path), cs_cert); }
	else
		{ cs_strncpy(path, cfg.http_cert, sizeof(path)); }

	if(!ctx)
	{
		ERR_print_errors_fp(stderr);
		return NULL;
	}

	if(SSL_CTX_use_certificate_file(ctx, path, SSL_FILETYPE_PEM) <= 0)
	{
		ERR_print_errors_fp(stderr);
		return NULL;
	}

	if(SSL_CTX_use_PrivateKey_file(ctx, path, SSL_FILETYPE_PEM) <= 0)
	{
		ERR_print_errors_fp(stderr);
		return NULL;
	}

	if(!SSL_CTX_check_private_key(ctx))
	{
		cs_log("SSL: Private key does not match the certificate public key");
		return NULL;
	}
	cs_log("load ssl certificate file %s", path);
	return ctx;
}
示例#25
0
文件: openssl.c 项目: wljcom/appweb
/*
    Create and initialize an SSL configuration for a route. This configuration is used by all requests for
    a given route. An application can have different SSL configurations for different routes. There is also 
    a default SSL configuration that is used when a route does not define a configuration and one for clients.
 */
static OpenConfig *createOpenSslConfig(MprSocket *sp)
{
    MprSsl          *ssl;
    OpenConfig      *cfg;
    X509_STORE      *store;
    SSL_CTX         *context;
    cchar           *key;
    uchar           resume[16];
    int             verifyMode;

    ssl = sp->ssl;
    assert(ssl);

    if ((ssl->config = mprAllocObj(OpenConfig, manageOpenConfig)) == 0) {
        return 0;
    }
    cfg = ssl->config;

    if ((context = SSL_CTX_new(SSLv23_method())) == 0) {
        mprLog("error openssl", 0, "Unable to create SSL context"); 
        return 0;
    }
    SSL_CTX_set_app_data(context, (void*) ssl);

    if (ssl->verifyPeer && !(ssl->caFile || ssl->caPath)) {
        sp->errorMsg = sfmt("Cannot verify peer due to undefined CA certificates");
        SSL_CTX_free(context);
        return 0;
    }

    /*
        Configure the certificates
     */
    if (ssl->certFile) {
        if (SSL_CTX_use_certificate_chain_file(context, ssl->certFile) <= 0) {
            if (SSL_CTX_use_certificate_file(context, ssl->certFile, SSL_FILETYPE_ASN1) <= 0) {
                mprLog("error openssl", 0, "Cannot open certificate file: %s", ssl->certFile);
                SSL_CTX_free(context);
                return 0;
            }
        }
        key = (ssl->keyFile == 0) ? ssl->certFile : ssl->keyFile;
        if (key) {
            if (SSL_CTX_use_PrivateKey_file(context, key, SSL_FILETYPE_PEM) <= 0) {
                /* attempt ASN1 for self-signed format */
                if (SSL_CTX_use_PrivateKey_file(context, key, SSL_FILETYPE_ASN1) <= 0) {
                    mprLog("error openssl", 0, "Cannot open private key file: %s", key);
                    SSL_CTX_free(context);
                    return 0;
                }
            }
            if (!SSL_CTX_check_private_key(context)) {
                mprLog("error openssl", 0, "Check of private key file failed: %s", key);
                SSL_CTX_free(context);
                return 0;
            }
        }
    }
    if (ssl->ciphers) {
        ssl->ciphers = mapCipherNames(ssl->ciphers);
    }
    if (!ssl->ciphers && (sp->flags & MPR_SOCKET_SERVER)) {
        ssl->ciphers = sclone(OPENSSL_DEFAULT_CIPHERS);
    }
    if (ssl->ciphers) {
        mprLog("info openssl", 5, "Using SSL ciphers: %s", ssl->ciphers);
        if (SSL_CTX_set_cipher_list(context, ssl->ciphers) != 1) {
            sp->errorMsg = sfmt("Unable to set cipher list \"%s\". %s", ssl->ciphers, getOssError(sp)); 
            SSL_CTX_free(context);
            return 0;
        }
    }
    verifyMode = ssl->verifyPeer ? SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT : SSL_VERIFY_NONE;
    if (verifyMode != SSL_VERIFY_NONE) {
        if (!(ssl->caFile || ssl->caPath)) {
            sp->errorMsg = sclone("No defined certificate authority file");
            SSL_CTX_free(context);
            return 0;
        }
        if ((!SSL_CTX_load_verify_locations(context, (char*) ssl->caFile, (char*) ssl->caPath)) ||
                (!SSL_CTX_set_default_verify_paths(context))) {
            sp->errorMsg = sfmt("Unable to set certificate locations: %s: %s", ssl->caFile, ssl->caPath); 
            SSL_CTX_free(context);
            return 0;
        }
        if (ssl->caFile) {
            STACK_OF(X509_NAME) *certNames;
            certNames = SSL_load_client_CA_file(ssl->caFile);
            if (certNames) {
                /*
                    Define the list of CA certificates to send to the client
                    before they send their client certificate for validation
                 */
                SSL_CTX_set_client_CA_list(context, certNames);
            }
        }
        store = SSL_CTX_get_cert_store(context);
        if (ssl->revokeList && !X509_STORE_load_locations(store, ssl->revokeList, 0)) {
            mprLog("error openssl", 0, "Cannot load certificate revoke list: %s", ssl->revokeList);
            SSL_CTX_free(context);
            return 0;
        }
        if (sp->flags & MPR_SOCKET_SERVER) {
            SSL_CTX_set_verify_depth(context, ssl->verifyDepth);
        }
    }

    /*
        Define callbacks
     */
    SSL_CTX_set_verify(context, verifyMode, verifyPeerCertificate);

    /*
        Configure DH parameters
     */
    SSL_CTX_set_tmp_dh_callback(context, dhcallback);
    cfg->dhKey = getDhKey();

    /*
        Define default OpenSSL options
     */
    SSL_CTX_set_options(context, SSL_OP_ALL);

    /*
        Ensure we generate a new private key for each connection
     */
    SSL_CTX_set_options(context, SSL_OP_SINGLE_DH_USE);

    /*
        Define a session reuse context
     */
    RAND_bytes(resume, sizeof(resume));
    SSL_CTX_set_session_id_context(context, resume, sizeof(resume));

    /*
        Elliptic Curve initialization
     */
#if SSL_OP_SINGLE_ECDH_USE
    #ifdef SSL_CTX_set_ecdh_auto
        SSL_CTX_set_ecdh_auto(context, 1);
    #else
        {
            EC_KEY  *ecdh;
            cchar   *name;
            int      nid;

            name = ME_MPR_SSL_CURVE;
            if ((nid = OBJ_sn2nid(name)) == 0) {
                sp->errorMsg = sfmt("Unknown curve name \"%s\"", name);
                SSL_CTX_free(context);
                return 0;
            }
            if ((ecdh = EC_KEY_new_by_curve_name(nid)) == 0) {
                sp->errorMsg = sfmt("Unable to create curve \"%s\"", name);
                SSL_CTX_free(context);
                return 0;
            }
            SSL_CTX_set_options(context, SSL_OP_SINGLE_ECDH_USE);
            SSL_CTX_set_tmp_ecdh(context, ecdh);
            EC_KEY_free(ecdh);
        }
    #endif
#endif

    SSL_CTX_set_mode(context, SSL_MODE_ENABLE_PARTIAL_WRITE | SSL_MODE_AUTO_RETRY | SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER);
#ifdef SSL_OP_MSIE_SSLV2_RSA_PADDING
    SSL_CTX_set_options(context, SSL_OP_MSIE_SSLV2_RSA_PADDING);
#endif
#ifdef SSL_MODE_RELEASE_BUFFERS
    SSL_CTX_set_mode(context, SSL_MODE_RELEASE_BUFFERS);
#endif
#ifdef SSL_OP_CIPHER_SERVER_PREFERENCE
    SSL_CTX_set_mode(context, SSL_OP_CIPHER_SERVER_PREFERENCE);
#endif
    /*
        Select the required protocols
        Disable SSLv2 and SSLv3 by default -- they are insecure.
     */
    SSL_CTX_set_options(context, SSL_OP_NO_SSLv2);
    SSL_CTX_set_options(context, SSL_OP_NO_SSLv3);
#ifdef SSL_OP_NO_TLSv1
    if (!(ssl->protocols & MPR_PROTO_TLSV1)) {
        SSL_CTX_set_options(context, SSL_OP_NO_TLSv1);
    }
#endif
#ifdef SSL_OP_NO_TLSv1_1
    if (!(ssl->protocols & MPR_PROTO_TLSV1_1)) {
        SSL_CTX_set_options(context, SSL_OP_NO_TLSv1_1);
    }
#endif
#ifdef SSL_OP_NO_TLSv1_2
    if (!(ssl->protocols & MPR_PROTO_TLSV1_2)) {
        SSL_CTX_set_options(context, SSL_OP_NO_TLSv1_2);
    }
#endif

    /*
        Options set via main.me mpr.ssl.*
     */
#if defined(SSL_OP_NO_TICKET)
    /*
        Ticket based session reuse is enabled by default
     */
    #if defined(ME_MPR_SSL_TICKET)
        if (ME_MPR_SSL_TICKET) {
            SSL_CTX_clear_options(context, SSL_OP_NO_TICKET);
        } else {
            SSL_CTX_set_options(context, SSL_OP_NO_TICKET);
        }
    #else
        SSL_CTX_clear_options(context, SSL_OP_NO_TICKET);
    #endif
#endif

#if defined(SSL_OP_NO_COMPRESSION)
    /* 
        Use of compression is not secure. Disabled by default.
     */
    #if defined(ME_MPR_SSL_COMPRESSION)
        if (ME_MPR_SSL_COMPRESSION) {
            SSL_CTX_clear_options(context, SSL_OP_NO_COMPRESSION);
        } else {
            SSL_CTX_set_options(context, SSL_OP_NO_COMPRESSION);
        }
    #else
        /*
            CRIME attack targets compression
         */
        SSL_CTX_clear_options(context, SSL_OP_NO_COMPRESSION);
    #endif
#endif

#if defined(SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION)
    /*
        Force a new session on renegotiation. Default to true.
     */
    #if defined(ME_MPR_SSL_RENEGOTIATE)
        if (ME_MPR_SSL_RENEGOTIATE) {
            SSL_CTX_clear_options(context, SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION);
        } else {
            SSL_CTX_set_options(context, SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION);
        }
    #else
        SSL_CTX_set_options(context, SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION);
    #endif
#endif

#if defined(SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS)
    /*
        Disables a countermeasure against a SSL 3.0/TLS 1.0 protocol vulnerability affecting CBC ciphers.
        Defaults to true.
     */
    #if defined(ME_MPR_SSL_EMPTY_FRAGMENTS)
        if (ME_MPR_SSL_EMPTY_FRAGMENTS) {
            /* SSL_OP_ALL disables empty fragments. Only needed for ancient browsers like IE-6 on SSL-3.0/TLS-1.0 */
            SSL_CTX_clear_options(context, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS);
        } else {
            SSL_CTX_set_options(context, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS);
        }
    #else
        SSL_CTX_set_options(context, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS);
    #endif
#endif

#if defined(ME_MPR_SSL_CACHE)
    /*
        Set the number of sessions supported. Default in OpenSSL is 20K.
     */
    SSL_CTX_sess_set_cache_size(context, ME_MPR_SSL_CACHE);
#else
    SSL_CTX_sess_set_cache_size(context, 1024);
#endif

    cfg->context = context;
    return cfg;
}