int main(){
int t;
while(scanf("%d", &t) > 0){
int i, x, y;
char op[10];
for(i = 0; i < 30001; i++)
top[i] = down[i] = Fdown[i] = Ftop[i] = i, ct[i] = 0;
while(t--){
scanf("%s", op);
if(op[0] == 'M'){
scanf("%d%d", &x, &y);
int ftop = find_top(y), fdown = find_down(x);
if(find_top(x) != ftop){
down[fdown] = ftop;
top[ftop] = fdown;
Fdown[fdown] = ftop;
Ftop[ftop] = fdown;
}
}
else{
scanf("%d", &x);
printf("%d\n", ct[x]);
}
}
}
return 0;
}
//********************************************************
void WordsEdit::do_add_word(void)
{
QString str = lineword->text();
char *word = (char *)str.latin1();
FindLastWord = 0;
FindLastGroup = 0;
int curgroup = listgroup->currentItem();
if(find_down(word)){
sprintf(tmp,"This word already exists (in group %d).\nDo you wish to remove this occurance and add it to this group ?",wordlist->WordGroup[FindLastGroup].GroupNum);
switch( QMessageBox::information( this, "Remove duplicate word ?",
tmp,
"Yes", "No",
0, // Enter == button 0
1 ) ) { // Escape == button 1
case 0: //yes
wordlist->WordGroup[FindLastGroup].Words.del(FindLastWord);
update_group(FindLastGroup);
changed=true;
break;
case 1: //no
return;
}
}
wordlist->WordGroup[curgroup].Words.addsorted(word);
changed=true;
select_group(curgroup);
update_group(curgroup);
}
//********************************************************
void WordsFind::find_next_cb()
{
int ret;
QString str = find_field->text();
char *word = (char *)str.latin1();
if(FindLastGroup==-1||FindLastWord==-1){
find_first_cb();
return;
}
if(down->isChecked()){
if(FindLastWord+1 >= wordlist->WordGroup[FindLastGroup].Words.num){
if(FindLastGroup+1 >= wordlist->NumGroups){
menu->errmes("Find","'%s' not found !",word);
return ;
}
else{
FindLastWord = 0;
FindLastGroup++;
}
}
else{
FindLastWord++;
}
ret = find_down(word);
}
else{
if(FindLastWord -1 < 0){
if(FindLastGroup-1 < 0){
menu->errmes("Find","'%s' not found !",word);
return;
}
else{
FindLastGroup--;
FindLastWord = wordlist->WordGroup[FindLastGroup].Words.num-1;
}
}
else{
FindLastWord--;
}
ret = find_up(word);
}
if(ret){
wordsedit->listgroup->setCurrentItem(FindLastGroup);
wordsedit->listwords->setCurrentItem(FindLastWord);
}
else{
menu->errmes("Find","'%s' not found !",word);
}
}
//********************************************************
void WordsFind::find_first_cb()
{
int ret;
QString str = find_field->text();
char *word = (char *)str.latin1();
if(down->isChecked()){
if(start->isChecked()){
FindLastGroup=0;
FindLastWord=0;
}
else{
if(wordsedit->listgroup->currentItem()!=-1)
FindLastGroup=wordsedit->listgroup->currentItem();
else
FindLastGroup=0;
if(wordsedit->listwords->currentItem()!=-1)
FindLastWord=wordsedit->listwords->currentItem();
else
FindLastWord=0;
}
ret = find_down(word);
}
else{
if(start->isChecked()){
FindLastGroup=wordlist->NumGroups -1;
FindLastWord = wordlist->WordGroup[FindLastGroup].Words.num-1;
}
else{
if(wordsedit->listgroup->currentItem()!=-1)
FindLastGroup=wordsedit->listgroup->currentItem();
else
FindLastGroup=wordlist->NumGroups -1;
if(wordsedit->listwords->currentItem()!=-1)
FindLastWord=wordsedit->listwords->currentItem();
else
FindLastWord=wordlist->WordGroup[FindLastGroup].Words.num-1;
}
ret = find_up(word);
}
if(ret){
wordsedit->listgroup->setCurrentItem(FindLastGroup);
wordsedit->listwords->setCurrentItem(FindLastWord);
}
else{
menu->errmes("Find","'%s' not found !",word);
}
}
void hexbright::update() {
unsigned long now;
#if (DEBUG==DEBUG_LOOP)
unsigned long start_time=micros();
#endif
#ifdef STROBE
while (true) {
do {
now = micros();
} while (next_strobe > now && // not ready for strobe
continue_time > now); // not ready for update
if (next_strobe <= now) {
if (now - next_strobe <26) {
digitalWriteFast(DPIN_DRV_EN, HIGH);
delayMicroseconds(strobe_duration);
digitalWriteFast(DPIN_DRV_EN, LOW);
}
next_strobe += strobe_delay;
}
if(continue_time <= now) {
if(strobe_delay>update_delay && // we strobe less than once every 8333 microseconds
next_strobe-continue_time < 4000) // and the next strobe is within 4000 microseconds (may occur before we return)
continue;
else
break;
}
} // do nothing... (will short circuit once every 70 minutes (micros maxint))
#else
do {
now = micros();
} while (continue_time > now); // not ready for update
#endif
// if we're in debug mode, let us know if our loops are too large
#if (DEBUG!=DEBUG_OFF && DEBUG!=DEBUG_PRINT)
static int i=0;
#if (DEBUG==DEBUG_LOOP)
static unsigned long last_time = 0;
if(!i) {
Serial.print("Time used: ");
Serial.print(start_time-last_time);
Serial.println("/8333");
}
last_time = now;
#endif
if(now-continue_time>5000 && !i) {
// This may be caused by too much processing for our update_delay, or by too many print statements)
// If you're triggering this, your button and light will react more slowly, and some accelerometer
// data is being missed.
Serial.println("WARNING: code is too slow");
}
if (!i)
i=1000/update_delay; // display loop output every second
else
i--;
#endif
// power saving modes described here: http://www.atmel.com/Images/2545s.pdf
//run overheat protection, time display, track battery usage
#ifdef LED
// regardless of desired led state, turn it off so we can read the button
_led_off(RLED);
delayMicroseconds(50); // let the light stabilize...
read_button();
// turn on (or off) the leds, if appropriate
adjust_leds();
#ifdef PRINT_NUMBER
update_number();
#endif
#else
read_button();
#endif
read_thermal_sensor(); // takes about .2 ms to execute (fairly long, relative to the other steps)
read_charge_state();
read_avr_voltage();
#ifdef ACCELEROMETER
read_accelerometer();
find_down();
#endif
detect_overheating();
detect_low_battery();
apply_max_light_level();
// change light levels as requested
adjust_light();
// advance time at the same rate as values are changed in the accelerometer.
// advance continue_time here, so the first run through short-circuits,
// meaning we will read hardware immediately after power on.
continue_time = continue_time+(1000*update_delay);
}
void hexbright::update() {
// advance time at the same rate as values are changed in the accelerometer.
continue_time = continue_time+(1000*update_delay);
unsigned long now;
while (true) {
do {
now = micros();
} while (next_strobe > now && // not ready for strobe
continue_time > now); // not ready for update
if (next_strobe <= now) {
if (now - next_strobe <26) {
digitalWrite(DPIN_DRV_EN, HIGH);
delayMicroseconds(strobe_duration);
digitalWrite(DPIN_DRV_EN, LOW);
}
next_strobe += strobe_delay;
}
if(continue_time <= now) {
if(strobe_delay>update_delay && // we strobe less than once every 8333 microseconds
next_strobe-continue_time < 4000) // and the next strobe is within 4000 microseconds (may occur before we return)
continue;
else
break;
}
} // do nothing... (will short circuit once every 70 minutes (micros maxint))
// if we're in debug mode, let us know if our loops are too large
#if (DEBUG!=DEBUG_OFF)
static int i=0;
static float avg_loop_time = 0;
static float last_time = 0;
avg_loop_time = (avg_loop_time*29 + continue_time-last_time)/30;
#if (DEBUG==DEBUG_LOOP)
if(!i) {
Serial.print("Average loop time: ");
Serial.println(avg_loop_time/1000);
}
#endif
if(avg_loop_time/1000>update_delay+1 && !i) {
// This may be caused by too much processing for our update_delay, or by too many print statements (each one takes a few ms)
Serial.print("WARNING: loop time: ");
Serial.println(avg_loop_time/1000);
}
if (!i)
i=1000/update_delay; // display loop output every second
else
i--;
last_time = continue_time;
#endif
// power saving modes described here: http://www.atmel.com/Images/2545s.pdf
//run overheat protection, time display, track battery usage
#ifdef LED
// regardless of desired led state, turn it off so we can read the button
_led_off(RLED);
delayMicroseconds(50); // let the light stabilize...
read_button();
// turn on (or off) the leds, if appropriate
adjust_leds();
#ifdef PRINT_NUMBER
update_number();
#endif
#else
read_button();
#endif
read_thermal_sensor(); // takes about .2 ms to execute (fairly long, relative to the other steps)
#ifdef ACCELEROMETER
read_accelerometer();
find_down();
#endif
overheat_protection();
// change light levels as requested
adjust_light();
}
int find_down(int x){
return x == Fdown[x] ? x : (Fdown[x] = find_down(Fdown[x]));
}