示例#1
0
文件: init.c 项目: chambejp/system
int main(int argc, char **argv)
{
    int fd_count = 0;
    struct pollfd ufds[4];
    char *tmpdev;
    char* debuggable;
    char tmp[32];
    int property_set_fd_init = 0;
    int signal_fd_init = 0;
    int keychord_fd_init = 0;

    if (!strcmp(basename(argv[0]), "ueventd"))
        return ueventd_main(argc, argv);

    /* clear the umask */
    umask(0);

        /* Get the basic filesystem setup we need put
         * together in the initramdisk on / and then we'll
         * let the rc file figure out the rest.
         */
    mkdir("/dev", 0755);
    mkdir("/proc", 0755);
    mkdir("/sys", 0755);

    mount("tmpfs", "/dev", "tmpfs", MS_NOSUID, "mode=0755");
    mkdir("/dev/pts", 0755);
    mkdir("/dev/socket", 0755);
    mount("devpts", "/dev/pts", "devpts", 0, NULL);
    mount("proc", "/proc", "proc", 0, NULL);
    mount("sysfs", "/sys", "sysfs", 0, NULL);

        /* indicate that booting is in progress to background fw loaders, etc */
    close(open("/dev/.booting", O_WRONLY | O_CREAT, 0000));

        /* We must have some place other than / to create the
         * device nodes for kmsg and null, otherwise we won't
         * be able to remount / read-only later on.
         * Now that tmpfs is mounted on /dev, we can actually
         * talk to the outside world.
         */
    open_devnull_stdio();
    klog_init();

    INFO("reading config file\n");

    if (!charging_mode_booting())
       init_parse_config_file("/init.rc");
    else
       init_parse_config_file("/lpm.rc");

    /* pull the kernel commandline and ramdisk properties file in */
    import_kernel_cmdline(0, import_kernel_nv);
    /* don't expose the raw commandline to nonpriv processes */
    chmod("/proc/cmdline", 0440);

    if (!charging_mode_booting()) {
         get_hardware_name(hardware, &revision);
         snprintf(tmp, sizeof(tmp), "/init.%s.rc", hardware);
         init_parse_config_file(tmp);
    }

    /* Check for a target specific initialisation file and read if present */
    if (access("/init.target.rc", R_OK) == 0) {
        INFO("Reading target specific config file");
            init_parse_config_file("/init.target.rc");
    }

    action_for_each_trigger("early-init", action_add_queue_tail);

    queue_builtin_action(wait_for_coldboot_done_action, "wait_for_coldboot_done");
    queue_builtin_action(property_init_action, "property_init");
    queue_builtin_action(keychord_init_action, "keychord_init");
    queue_builtin_action(console_init_action, "console_init");
    queue_builtin_action(set_init_properties_action, "set_init_properties");

    /* execute all the boot actions to get us started */
    action_for_each_trigger("init", action_add_queue_tail);

    /* skip mounting filesystems in charger mode */
    if (strcmp(bootmode, "charger") != 0 || strcmp(battchg_pause, "true") != 0) {
        action_for_each_trigger("early-fs", action_add_queue_tail);
    if(emmc_boot) {
        action_for_each_trigger("emmc-fs", action_add_queue_tail);
    } else {
        action_for_each_trigger("fs", action_add_queue_tail);
    }
        action_for_each_trigger("post-fs", action_add_queue_tail);
        action_for_each_trigger("post-fs-data", action_add_queue_tail);
    }

    queue_builtin_action(property_service_init_action, "property_service_init");
    queue_builtin_action(signal_init_action, "signal_init");
    queue_builtin_action(check_startup_action, "check_startup");

    if (!strcmp(bootmode, "charger") || !strcmp(battchg_pause, "true")) {
        action_for_each_trigger("charger", action_add_queue_tail);
    } else {
        action_for_each_trigger("early-boot", action_add_queue_tail);
        action_for_each_trigger("boot", action_add_queue_tail);
    }

        /* run all property triggers based on current state of the properties */
    queue_builtin_action(queue_property_triggers_action, "queue_propety_triggers");


#if BOOTCHART
    queue_builtin_action(bootchart_init_action, "bootchart_init");
#endif

    for(;;) {
        int nr, i, timeout = -1;

        execute_one_command();
        restart_processes();

        if (!property_set_fd_init && get_property_set_fd() > 0) {
            ufds[fd_count].fd = get_property_set_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            property_set_fd_init = 1;
        }
        if (!signal_fd_init && get_signal_fd() > 0) {
            ufds[fd_count].fd = get_signal_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            signal_fd_init = 1;
        }
        if (!keychord_fd_init && get_keychord_fd() > 0) {
            ufds[fd_count].fd = get_keychord_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            keychord_fd_init = 1;
        }

        if (process_needs_restart) {
            timeout = (process_needs_restart - gettime()) * 1000;
            if (timeout < 0)
                timeout = 0;
        }

        if (!action_queue_empty() || cur_action)
            timeout = 0;

#if BOOTCHART
        if (bootchart_count > 0) {
            if (timeout < 0 || timeout > BOOTCHART_POLLING_MS)
                timeout = BOOTCHART_POLLING_MS;
            if (bootchart_step() < 0 || --bootchart_count == 0) {
                bootchart_finish();
                bootchart_count = 0;
            }
        }
#endif

        nr = poll(ufds, fd_count, timeout);
        if (nr <= 0)
            continue;

        for (i = 0; i < fd_count; i++) {
            if (ufds[i].revents == POLLIN) {
                if (ufds[i].fd == get_property_set_fd())
                    handle_property_set_fd();
                else if (ufds[i].fd == get_keychord_fd())
                    handle_keychord();
                else if (ufds[i].fd == get_signal_fd())
                    handle_signal();
            }
        }
    }

    return 0;
}
int main(int argc, char **argv)
{
    int fd_count = 0;
    struct pollfd ufds[4];
    char *tmpdev;
    char* debuggable;
    char tmp[32];
    int property_set_fd_init = 0;
    int signal_fd_init = 0;
    int keychord_fd_init = 0;
    bool is_charger = false;

    if (!strcmp(basename(argv[0]), "ueventd"))
        return ueventd_main(argc, argv);

    if (!strcmp(basename(argv[0]), "watchdogd"))
        return watchdogd_main(argc, argv);

    /* clear the umask */
    umask(0);

        /* Get the basic filesystem setup we need put
         * together in the initramdisk on / and then we'll
         * let the rc file figure out the rest.
         */
    mkdir("/dev", 0755);
    mkdir("/proc", 0755);
    mkdir("/sys", 0755);

    mount("tmpfs", "/dev", "tmpfs", MS_NOSUID, "mode=0755");
    mkdir("/dev/pts", 0755);
    mkdir("/dev/socket", 0755);
    mount("devpts", "/dev/pts", "devpts", 0, NULL);
    mount("proc", "/proc", "proc", 0, NULL);
    mount("sysfs", "/sys", "sysfs", 0, NULL);

        /* indicate that booting is in progress to background fw loaders, etc */
    close(open("/dev/.booting", O_WRONLY | O_CREAT, 0000));

        /* We must have some place other than / to create the
         * device nodes for kmsg and null, otherwise we won't
         * be able to remount / read-only later on.
         * Now that tmpfs is mounted on /dev, we can actually
         * talk to the outside world.
         */
    open_devnull_stdio();
    klog_init();
    property_init();

    get_hardware_name(hardware, &revision);

    process_kernel_cmdline();

#ifdef HAVE_SELINUX
    union selinux_callback cb;
    cb.func_log = klog_write;
    selinux_set_callback(SELINUX_CB_LOG, cb);

    cb.func_audit = audit_callback;
    selinux_set_callback(SELINUX_CB_AUDIT, cb);

    INFO("loading selinux policy\n");
    if (selinux_enabled) {
        if (selinux_android_load_policy() < 0) {
            selinux_enabled = 0;
            INFO("SELinux: Disabled due to failed policy load\n");
        } else {
            selinux_init_all_handles();
        }
    } else {
        INFO("SELinux:  Disabled by command line option\n");
    }
    /* These directories were necessarily created before initial policy load
     * and therefore need their security context restored to the proper value.
     * This must happen before /dev is populated by ueventd.
     */
    restorecon("/dev");
    restorecon("/dev/socket");
#endif

    is_charger = !strcmp(bootmode, "charger");

    INFO("property init\n");
    if (!is_charger)
        property_load_boot_defaults();

    INFO("reading config file\n");
    init_parse_config_file("/init.rc");

    action_for_each_trigger("early-init", action_add_queue_tail);

    queue_builtin_action(wait_for_coldboot_done_action, "wait_for_coldboot_done");
    queue_builtin_action(keychord_init_action, "keychord_init");
    //queue_builtin_action(console_init_action, "console_init");

    /* execute all the boot actions to get us started */
    action_for_each_trigger("init", action_add_queue_tail);

    /* skip mounting filesystems in charger mode */
    if (!is_charger) {
        action_for_each_trigger("early-fs", action_add_queue_tail);
        queue_builtin_action(console_init_action, "console_init");
        action_for_each_trigger("fs", action_add_queue_tail);
        action_for_each_trigger("post-fs", action_add_queue_tail);
        action_for_each_trigger("post-fs-data", action_add_queue_tail);
    }

    queue_builtin_action(property_service_init_action, "property_service_init");
    queue_builtin_action(signal_init_action, "signal_init");
    queue_builtin_action(check_startup_action, "check_startup");

    if (is_charger) {
        action_for_each_trigger("charger", action_add_queue_tail);
    } else {
        action_for_each_trigger("early-boot", action_add_queue_tail);
        action_for_each_trigger("boot", action_add_queue_tail);
    }

        /* run all property triggers based on current state of the properties */
    queue_builtin_action(queue_property_triggers_action, "queue_property_triggers");


#if BOOTCHART
    queue_builtin_action(bootchart_init_action, "bootchart_init");
#endif

    for(;;) {
        int nr, i, timeout = -1;

        execute_one_command();
        restart_processes();

        if (!property_set_fd_init && get_property_set_fd() > 0) {
            ufds[fd_count].fd = get_property_set_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            property_set_fd_init = 1;
        }
        if (!signal_fd_init && get_signal_fd() > 0) {
            ufds[fd_count].fd = get_signal_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            signal_fd_init = 1;
        }
        if (!keychord_fd_init && get_keychord_fd() > 0) {
            ufds[fd_count].fd = get_keychord_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            keychord_fd_init = 1;
        }

        if (process_needs_restart) {
            timeout = (process_needs_restart - gettime()) * 1000;
            if (timeout < 0)
                timeout = 0;
        }

        if (!action_queue_empty() || cur_action)
            timeout = 0;

#if BOOTCHART
        if (bootchart_count > 0) {
            if (timeout < 0 || timeout > BOOTCHART_POLLING_MS)
                timeout = BOOTCHART_POLLING_MS;
            if (bootchart_step() < 0 || --bootchart_count == 0) {
                bootchart_finish();
                bootchart_count = 0;
            }
        }
#endif

        nr = poll(ufds, fd_count, timeout);
        if (nr <= 0)
            continue;

        for (i = 0; i < fd_count; i++) {
            if (ufds[i].revents == POLLIN) {
                if (ufds[i].fd == get_property_set_fd())
                    handle_property_set_fd();
                else if (ufds[i].fd == get_keychord_fd())
                    handle_keychord();
                else if (ufds[i].fd == get_signal_fd())
                    handle_signal();
            }
        }
    }

    return 0;
}
示例#3
0
int main(int argc, char **argv)
{
    int fd_count = 0;
    struct pollfd ufds[4];
    char *tmpdev;
    char* debuggable;
    char tmp[32];
    int property_set_fd_init = 0;
    int signal_fd_init = 0;
    int keychord_fd_init = 0;
    bool is_charger = false;
#ifdef MTK_INIT
    int mt_boot_mode = 0;

    klog_set_level(6);
#endif
    if (!strcmp(basename(argv[0]), "ueventd"))
        return ueventd_main(argc, argv);

    if (!strcmp(basename(argv[0]), "watchdogd"))
        return watchdogd_main(argc, argv);

    /* clear the umask */
    umask(0);

        /* Get the basic filesystem setup we need put
         * together in the initramdisk on / and then we'll
         * let the rc file figure out the rest.
         */
    mkdir("/dev", 0755);
    mkdir("/proc", 0755);
    mkdir("/sys", 0755);

    mount("tmpfs", "/dev", "tmpfs", MS_NOSUID, "mode=0755");
    mkdir("/dev/pts", 0755);
    mkdir("/dev/socket", 0755);
    mount("devpts", "/dev/pts", "devpts", 0, NULL);
    mount("proc", "/proc", "proc", 0, NULL);
    mount("sysfs", "/sys", "sysfs", 0, NULL);

#ifdef INIT_ENG_BUILD
    mount("debugfs", "/sys/kernel/debug", "debugfs", 0, NULL);
#endif
        /* indicate that booting is in progress to background fw loaders, etc */
    close(open("/dev/.booting", O_WRONLY | O_CREAT, 0000));

        /* We must have some place other than / to create the
         * device nodes for kmsg and null, otherwise we won't
         * be able to remount / read-only later on.
         * Now that tmpfs is mounted on /dev, we can actually
         * talk to the outside world.
         */
    open_devnull_stdio();
    klog_init();
    property_init();

    get_hardware_name(hardware, &revision);

    process_kernel_cmdline();

    union selinux_callback cb;
    cb.func_log = log_callback;
    selinux_set_callback(SELINUX_CB_LOG, cb);

    cb.func_audit = audit_callback;
    selinux_set_callback(SELINUX_CB_AUDIT, cb);

    selinux_initialize();
    /* These directories were necessarily created before initial policy load
     * and therefore need their security context restored to the proper value.
     * This must happen before /dev is populated by ueventd.
     */
    restorecon("/dev");
    restorecon("/dev/socket");
    restorecon("/dev/__properties__");
    restorecon_recursive("/sys");

    is_charger = !strcmp(bootmode, "charger");

    INFO("property init\n");
    property_load_boot_defaults();
#ifndef INIT_ENG_BUILD
    property_set("ro.mtprof.disable", "1");
#endif


    INFO("reading config file\n");

#ifdef MTK_INIT
/* NEW FEATURE: multi-boot mode */
    mt_boot_mode = get_boot_mode();
    if ( (mt_boot_mode == MT_FACTORY_BOOT) || (mt_boot_mode == MT_ATE_FACTORY_BOOT) ) {
        printf("Factory Mode Booting.....\n");
        property_set("sys.mtk.no.factoryimage","1");
        init_parse_config_file("/factory_init.rc");
        init_parse_config_file("/factory_init.project.rc");
    }
    else if ( mt_boot_mode == MT_META_BOOT ) {
        printf("META Mode Booting.....\n");
        init_parse_config_file("/meta_init.rc");
        init_parse_config_file("/meta_init.project.rc");
    }
	else
     {
#endif // MTK_INIT
        init_parse_config_file("/init.rc");
#ifdef MTK_INIT
    }
#endif

#ifdef MTK_INIT
    if ( (mt_boot_mode == MT_FACTORY_BOOT) || (mt_boot_mode == MT_ATE_FACTORY_BOOT) ) {
    	  NOTICE("No need modem.rc for factory mode\n");
    }
    else if ( mt_boot_mode == MT_META_BOOT ) {
        init_parse_config_file("/meta_init.modem.rc");
    }else {
        init_parse_config_file("/init.modem.rc");
    }
#endif // MTK_INIT
/**** End of Parsing .rc files ****/

    action_for_each_trigger("early-init", action_add_queue_tail);

    queue_builtin_action(wait_for_coldboot_done_action, "wait_for_coldboot_done");
    queue_builtin_action(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng");
    queue_builtin_action(keychord_init_action, "keychord_init");
    queue_builtin_action(console_init_action, "console_init");

    /* execute all the boot actions to get us started */
    action_for_each_trigger("init", action_add_queue_tail);

    /* Repeat mix_hwrng_into_linux_rng in case /dev/hw_random or /dev/random
     * wasn't ready immediately after wait_for_coldboot_done
     */
    queue_builtin_action(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng");
    queue_builtin_action(property_service_init_action, "property_service_init");
    queue_builtin_action(signal_init_action, "signal_init");

    /* Don't mount filesystems or start core system services if in charger mode. */
    if (is_charger) {
        action_for_each_trigger("charger", action_add_queue_tail);
    }
    else
     {
        action_for_each_trigger("late-init", action_add_queue_tail);
    }

    /* run all property triggers based on current state of the properties */
    queue_builtin_action(queue_property_triggers_action, "queue_property_triggers");

#if BOOTCHART
    queue_builtin_action(bootchart_init_action, "bootchart_init");
#endif

    for(;;) {
        int nr, i, timeout = -1;

        execute_one_command();
        restart_processes();

        if (!property_set_fd_init && get_property_set_fd() > 0) {
            ufds[fd_count].fd = get_property_set_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            property_set_fd_init = 1;
        }
        if (!signal_fd_init && get_signal_fd() > 0) {
            ufds[fd_count].fd = get_signal_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            signal_fd_init = 1;
        }
        if (!keychord_fd_init && get_keychord_fd() > 0) {
            ufds[fd_count].fd = get_keychord_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            keychord_fd_init = 1;
        }

        if (process_needs_restart) {
            timeout = (process_needs_restart - gettime()) * 1000;
            if (timeout < 0)
                timeout = 0;
        }

        if (!action_queue_empty() || cur_action)
            timeout = 0;

#if BOOTCHART
        if (bootchart_count > 0) {
            if (timeout < 0 || timeout > BOOTCHART_POLLING_MS)
                timeout = BOOTCHART_POLLING_MS;
            if (bootchart_step() < 0 || --bootchart_count == 0) {
                bootchart_finish();
                bootchart_count = 0;
            }
        }
#endif

        nr = poll(ufds, fd_count, timeout);
        if (nr <= 0)
            continue;

        for (i = 0; i < fd_count; i++) {
            if (ufds[i].revents & POLLIN) {
                if (ufds[i].fd == get_property_set_fd())
                    handle_property_set_fd();
                else if (ufds[i].fd == get_keychord_fd())
                    handle_keychord();
                else if (ufds[i].fd == get_signal_fd())
                    handle_signal();
            }
        }
    }

    return 0;
}
int main(int argc, char **argv)
{
    int fd_count = 0;
    struct pollfd ufds[4];
    char *tmpdev;
    char* debuggable;
    char tmp[32];
    int property_set_fd_init = 0;
    int signal_fd_init = 0;
    int keychord_fd_init = 0;
    bool is_charger = false;

    if (!strcmp(basename(argv[0]), "ueventd"))
        return ueventd_main(argc, argv);

    if (!strcmp(basename(argv[0]), "watchdogd"))
        return watchdogd_main(argc, argv);

    /* clear the umask */
    umask(0);

        /* Get the basic filesystem setup we need put
         * together in the initramdisk on / and then we'll
         * let the rc file figure out the rest.
         */
    /* Don't repeat the setup of these filesystems,
     * it creates double mount points with an unknown effect
     * on the system.  This init file is for 2nd-init anyway.
     */
#ifndef NO_DEVFS_SETUP
    mkdir("/dev", 0755);
    mkdir("/proc", 0755);
    mkdir("/sys", 0755);

    mount("tmpfs", "/dev", "tmpfs", MS_NOSUID, "mode=0755");
    mkdir("/dev/pts", 0755);
    mkdir("/dev/socket", 0755);
    mount("devpts", "/dev/pts", "devpts", 0, NULL);
    mount("proc", "/proc", "proc", 0, NULL);
    mount("sysfs", "/sys", "sysfs", 0, NULL);

        /* indicate that booting is in progress to background fw loaders, etc */
    close(open("/dev/.booting", O_WRONLY | O_CREAT, 0000));

        /* We must have some place other than / to create the
         * device nodes for kmsg and null, otherwise we won't
         * be able to remount / read-only later on.
         * Now that tmpfs is mounted on /dev, we can actually
         * talk to the outside world.
         */
    open_devnull_stdio();
    klog_init();
#endif
    property_init();

    get_hardware_name(hardware, &revision);

    process_kernel_cmdline();

    union selinux_callback cb;
    cb.func_log = klog_write;
    selinux_set_callback(SELINUX_CB_LOG, cb);

    cb.func_audit = audit_callback;
    selinux_set_callback(SELINUX_CB_AUDIT, cb);

    selinux_initialize();
    /* These directories were necessarily created before initial policy load
     * and therefore need their security context restored to the proper value.
     * This must happen before /dev is populated by ueventd.
     */
    restorecon("/dev");
    restorecon("/dev/socket");
    restorecon("/dev/__properties__");
    restorecon_recursive("/sys");

    is_charger = !strcmp(bootmode, "charger");

    INFO("property init\n");
    if (!is_charger)
        property_load_boot_defaults();

    INFO("reading config file\n");

    if (!charging_mode_booting())
       init_parse_config_file("/init.rc");
    else
       init_parse_config_file("/lpm.rc");

    /* Check for an emmc initialisation file and read if present */
    if (emmc_boot && access("/init.emmc.rc", R_OK) == 0) {
        INFO("Reading emmc config file");
            init_parse_config_file("/init.emmc.rc");
    }

    /* Check for a target specific initialisation file and read if present */
    if (access("/init.target.rc", R_OK) == 0) {
        INFO("Reading target specific config file");
            init_parse_config_file("/init.target.rc");
    }

    action_for_each_trigger("early-init", action_add_queue_tail);

    queue_builtin_action(wait_for_coldboot_done_action, "wait_for_coldboot_done");
    queue_builtin_action(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng");
    queue_builtin_action(keychord_init_action, "keychord_init");
    queue_builtin_action(console_init_action, "console_init");

    /* execute all the boot actions to get us started */
    action_for_each_trigger("init", action_add_queue_tail);

    if (!is_charger) {
        action_for_each_trigger("early-fs", action_add_queue_tail);
        if(emmc_boot) {
            action_for_each_trigger("emmc-fs", action_add_queue_tail);
        } else {
            action_for_each_trigger("fs", action_add_queue_tail);
        }
        action_for_each_trigger("post-fs", action_add_queue_tail);
        action_for_each_trigger("post-fs-data", action_add_queue_tail);
    } else {
        action_for_each_trigger("charger-fs", action_add_queue_tail);
    }

    /* Repeat mix_hwrng_into_linux_rng in case /dev/hw_random or /dev/random
     * wasn't ready immediately after wait_for_coldboot_done
     */
    queue_builtin_action(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng");

    queue_builtin_action(property_service_init_action, "property_service_init");
    queue_builtin_action(signal_init_action, "signal_init");
    queue_builtin_action(check_startup_action, "check_startup");

    /* Older bootloaders use non-standard charging modes. Check for
     * those now, after mounting the filesystems */
    if (strcmp(battchg_pause, BOARD_CHARGING_CMDLINE_VALUE) == 0)
        is_charger = 1;

    if (is_charger) {
        action_for_each_trigger("charger", action_add_queue_tail);
    } else {
        action_for_each_trigger("early-boot", action_add_queue_tail);
        action_for_each_trigger("boot", action_add_queue_tail);
    }

        /* run all property triggers based on current state of the properties */
    queue_builtin_action(queue_property_triggers_action, "queue_property_triggers");


#if BOOTCHART
    queue_builtin_action(bootchart_init_action, "bootchart_init");
#endif

    for(;;) {
        int nr, i, timeout = -1;

        execute_one_command();
        restart_processes();

        if (!property_set_fd_init && get_property_set_fd() > 0) {
            ufds[fd_count].fd = get_property_set_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            property_set_fd_init = 1;
        }
        if (!signal_fd_init && get_signal_fd() > 0) {
            ufds[fd_count].fd = get_signal_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            signal_fd_init = 1;
        }
        if (!keychord_fd_init && get_keychord_fd() > 0) {
            ufds[fd_count].fd = get_keychord_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            keychord_fd_init = 1;
        }

        if (process_needs_restart) {
            timeout = (process_needs_restart - gettime()) * 1000;
            if (timeout < 0)
                timeout = 0;
        }

        if (!action_queue_empty() || cur_action)
            timeout = 0;

#if BOOTCHART
        if (bootchart_count > 0) {
            if (timeout < 0 || timeout > BOOTCHART_POLLING_MS)
                timeout = BOOTCHART_POLLING_MS;
            if (bootchart_step() < 0 || --bootchart_count == 0) {
                bootchart_finish();
                bootchart_count = 0;
            }
        }
#endif

        nr = poll(ufds, fd_count, timeout);
        if (nr <= 0)
            continue;

        for (i = 0; i < fd_count; i++) {
            if (ufds[i].revents & POLLIN) {
                if (ufds[i].fd == get_property_set_fd())
                    handle_property_set_fd();
                else if (ufds[i].fd == get_keychord_fd())
                    handle_keychord();
                else if (ufds[i].fd == get_signal_fd())
                    handle_signal();
            }
        }
    }

    return 0;
}
示例#5
0
文件: init.c 项目: 4Fwolf/mt6572_x201
int main(int argc, char **argv)
{
    int fd_count = 0;
    struct pollfd ufds[4];
    char *tmpdev;
    char* debuggable;
    char tmp[32];
    int property_set_fd_init = 0;
    int signal_fd_init = 0;
    int keychord_fd_init = 0;
    bool is_charger = false;

    klog_set_level(LOG_DEFAULT_LEVEL);
    if (!strcmp(basename(argv[0]), "ueventd"))
        return ueventd_main(argc, argv);

    if (!strcmp(basename(argv[0]), "watchdogd"))
        return watchdogd_main(argc, argv);

    /* clear the umask */
    umask(0);

        /* Get the basic filesystem setup we need put
         * together in the initramdisk on / and then we'll
         * let the rc file figure out the rest.
         */
    mkdir("/dev", 0755);
    mkdir("/proc", 0755);
    mkdir("/sys", 0755);

    mount("tmpfs", "/dev", "tmpfs", MS_NOSUID, "mode=0755");
    mkdir("/dev/pts", 0755);
    mkdir("/dev/socket", 0755);
    mount("devpts", "/dev/pts", "devpts", 0, NULL);
    mount("proc", "/proc", "proc", 0, NULL);
    mount("sysfs", "/sys", "sysfs", 0, NULL);

#ifdef INIT_ENG_BUILD
    mount("debugfs", "/sys/kernel/debug", "debugfs", 0, NULL);
#endif
        /* indicate that booting is in progress to background fw loaders, etc */
    close(open("/dev/.booting", O_WRONLY | O_CREAT, 0000));

        /* We must have some place other than / to create the
         * device nodes for kmsg and null, otherwise we won't
         * be able to remount / read-only later on.
         * Now that tmpfs is mounted on /dev, we can actually
         * talk to the outside world.
         */
    //open_devnull_stdio();
    klog_init();
    property_init();

    get_hardware_name(hardware, &revision);

    process_kernel_cmdline();

#ifdef HAVE_SELINUX
    union selinux_callback cb;
    cb.func_log = klog_write;
    selinux_set_callback(SELINUX_CB_LOG, cb);

    cb.func_audit = audit_callback;
    selinux_set_callback(SELINUX_CB_AUDIT, cb);

    INFO("loading selinux policy\n");
    if (selinux_enabled) {
        if (selinux_android_load_policy() < 0) {
            selinux_enabled = 0;
            INFO("SELinux: Disabled due to failed policy load\n");
        } else {
            selinux_init_all_handles();
        }
    } else {
        INFO("SELinux:  Disabled by command line option\n");
    }
    /* These directories were necessarily created before initial policy load
     * and therefore need their security context restored to the proper value.
     * This must happen before /dev is populated by ueventd.
     */
    restorecon("/dev");
    restorecon("/dev/socket");
#endif

    is_charger = !strcmp(bootmode, "charger");

    INFO("property init\n");
    if (!is_charger)
        property_load_boot_defaults();

#ifdef HAVE_AEE_FEATURE
    INFO("reading AEE config file\n");
#ifndef PARTIAL_BUILD
	init_parse_config_file("/init.aee.mtk.rc");
#else
	init_parse_config_file("/init.aee.customer.rc");
#endif // PARTIAL_BUILD

#endif // HAVE_AEE_FEATURE
    INFO("reading config file\n");

#ifdef USE_BUILT_IN_FACTORY
    ERROR("USE_BUILT_IN_FACTORY");
    if (is_factory_boot())
    {
        ERROR("This is factory boot");
        property_set("sys.mtk.no.factoryimage","1");
        init_parse_config_file("/factory_init.rc");
            INFO("reading project config file\n");
        init_parse_config_file("/factory_init.project.rc");
    }
    else
    {
        if(is_meta_boot())
        {
            ERROR("Parsing meta_init.rc ...\n");
            init_parse_config_file("/meta_init.rc");
            INFO("reading project config file\n");
            init_parse_config_file("/meta_init.project.rc");
            init_parse_config_file("/meta_init.modem.rc");
        }
        else if(is_advanced_meta_boot())
        {
            ERROR("Parsing advanced_meta_init.rc ...\n");
            init_parse_config_file("/advanced_meta_init.rc");
            INFO("reading project config file\n");
            init_parse_config_file("/advanced_meta_init.project.rc");
#ifdef MTK_FAT_ON_NAND
            printf("reading init.fon.rc file\n");
            init_parse_config_file("/init.fon.rc");
#endif
        }
        #if defined (MTK_KERNEL_POWER_OFF_CHARGING_SUPPORT)
	else if (is_kernel_power_off_charging_boot())
    {
        ERROR("Parsing init.charging.rc ...\n");
        if (init_parse_config_file("/init.charging.rc") < 0)
        {
            init_parse_config_file("/init.rc");
            INFO("reading project config file\n");
            init_parse_config_file("/init.project.rc");
            init_parse_config_file("/init.modem.rc");
	    }
	}
	#endif
        else
        {
            printf("Parsing init.rc ...\n");
            init_parse_config_file("/init.rc");
            INFO("reading project config file\n");
            init_parse_config_file("/init.project.rc");
            init_parse_config_file("/init.modem.rc");
#ifdef MTK_FAT_ON_NAND
            printf("reading init.fon.rc file\n");
            init_parse_config_file("/init.fon.rc");
#endif
        }
    }
#else
    if(is_meta_boot())
    {
        ERROR("Parsing meta_init.rc ...\n");
        init_parse_config_file("/meta_init.rc");
        INFO("reading project config file\n");
        init_parse_config_file("/meta_init.project.rc");
        init_parse_config_file("/meta_init.modem.rc");
    }
    else if(is_advanced_meta_boot())
    {
        ERROR("Parsing advanced_meta_init.rc ...\n");
        init_parse_config_file("/advanced_meta_init.rc");
        INFO("reading project config file\n");
        init_parse_config_file("/advanced_meta_init.project.rc");
    }
    else
    {
        printf("Parsing init.rc ...\n");
        init_parse_config_file("/init.rc");
        INFO("reading project config file\n");
        init_parse_config_file("/init.project.rc");
        init_parse_config_file("/init.modem.rc");
    }
#endif
#ifdef MTK_SHARED_SDCARD
    if(is_support_sdcard_share_boot())
    {
#ifdef MTK_2SDCARD_SWAP
        printf("Parsing init.ssd_sdswap.rc ...\n");
        init_parse_config_file("/init.ssd_nomuser.rc");
#else
        printf("Parsing init.ssd.rc ...\n");
        init_parse_config_file("/init.ssd.rc");
#endif
    }
    else 
    {
        printf("Parsing init.no_ssd.rc ...\n");
        init_parse_config_file("/init.no_ssd.rc");
    }
#else 
    printf("Parsing init.no_ssd.rc ...\n");
    init_parse_config_file("/init.no_ssd.rc");
#endif

#ifndef INIT_ENG_BUILD
    property_set("ro.mtprof.disable", "1");
#endif

    if(is_support_protected_data_boot())
    {       	    
	printf("Parsing init.protect.rc ...\n");  
        init_parse_config_file("/init.protect.rc");
    }
    snprintf(tmp, sizeof(tmp), "/init.%s.rc", hardware);
    init_parse_config_file(tmp);

    action_for_each_trigger("early-init", action_add_queue_tail);

    queue_builtin_action(wait_for_coldboot_done_action, "wait_for_coldboot_done");
    queue_builtin_action(keychord_init_action, "keychord_init");
    queue_builtin_action(console_init_action, "console_init");

    /* execute all the boot actions to get us started */
    action_for_each_trigger("init", action_add_queue_tail);

    /* skip mounting filesystems in charger mode */
    if (!is_charger) {
        queue_builtin_action(queue_fs_property_triggers_action, "queue_fs_propety_triggers");
        action_for_each_trigger("early-fs", action_add_queue_tail);
        action_for_each_trigger("fs", action_add_queue_tail);
        action_for_each_trigger("post-fs", action_add_queue_tail);
        action_for_each_trigger("post-fs-data", action_add_queue_tail);
    }

    queue_builtin_action(property_service_init_action, "property_service_init");
    queue_builtin_action(signal_init_action, "signal_init");
    queue_builtin_action(check_startup_action, "check_startup");

    queue_builtin_action(queue_early_property_triggers_action, "queue_early_propety_triggers");
    if (is_charger) {
        action_for_each_trigger("charger", action_add_queue_tail);
    }
#if defined (MTK_KERNEL_POWER_OFF_CHARGING_SUPPORT)
    else if (is_kernel_power_off_charging_boot()){
	action_for_each_trigger("ipo", action_add_queue_tail);
    } 
#endif
    else {
        action_for_each_trigger("early-boot", action_add_queue_tail);
        action_for_each_trigger("boot", action_add_queue_tail);
    }

        /* run all property triggers based on current state of the properties */
    queue_builtin_action(queue_property_triggers_action, "queue_property_triggers");

    /* change USB function by meta_com_id */
#ifdef USE_BUILT_IN_FACTORY
    if (is_meta_boot() || is_factory_boot()) {
        queue_builtin_action(queue_com_triggers_action, "queue_com_triggers");
    }
#else
    if (is_meta_boot()) {
        queue_builtin_action(queue_com_triggers_action, "queue_com_triggers");
    }
#endif


#if BOOTCHART
    queue_builtin_action(bootchart_init_action, "bootchart_init");
#endif

    for(;;) {
        int nr, i, timeout = -1;

        execute_one_command();
        restart_processes();

        if (!property_set_fd_init && get_property_set_fd() > 0) {
            ufds[fd_count].fd = get_property_set_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            property_set_fd_init = 1;
        }
        if (!signal_fd_init && get_signal_fd() > 0) {
            ufds[fd_count].fd = get_signal_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            signal_fd_init = 1;
        }
        if (!keychord_fd_init && get_keychord_fd() > 0) {
            ufds[fd_count].fd = get_keychord_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            keychord_fd_init = 1;
        }

        if (process_needs_restart) {
            timeout = (process_needs_restart - gettime()) * 1000;
            if (timeout < 0)
                timeout = 0;
        }

        if (!action_queue_empty() || cur_action)
            timeout = 0;

#if BOOTCHART
        if (bootchart_count > 0) {
            if (timeout < 0 || timeout > BOOTCHART_POLLING_MS)
                timeout = BOOTCHART_POLLING_MS;
            if (bootchart_step() < 0 || --bootchart_count == 0) {
                bootchart_finish();
                bootchart_count = 0;
            }
        }
#endif

        nr = poll(ufds, fd_count, timeout);
        if (nr <= 0)
            continue;

        for (i = 0; i < fd_count; i++) {
            if (ufds[i].revents == POLLIN) {
                if (ufds[i].fd == get_property_set_fd())
                    handle_property_set_fd();
                else if (ufds[i].fd == get_keychord_fd())
                    handle_keychord();
                else if (ufds[i].fd == get_signal_fd())
                    handle_signal();
            }
        }
    }

    return 0;
}
示例#6
0
int main(int argc, char **argv)
{
    int fd_count = 0;
    struct pollfd ufds[4];
    char *tmpdev;
    char* debuggable;
    char tmp[32];
    int property_set_fd_init = 0;
    int signal_fd_init = 0;
    int keychord_fd_init = 0;
    bool is_charger = false;        // 判断是否是在充电

    char* args_swapon[2];
    args_swapon[0] = "swapon_all";;
    args_swapon[1] = "/fstab.sun8i";;
        
    char* args_write[3];
    args_write[0] = "write";
    args_write[1] = "/proc/sys/vm/page-cluster";
    args_write[2] = "0";

    if (!strcmp(basename(argv[0]), "ueventd"))
        return ueventd_main(argc, argv);

    if (!strcmp(basename(argv[0]), "watchdogd"))
        return watchdogd_main(argc, argv);

    /* clear the umask */
    umask(0);

        /* Get the basic filesystem setup we need put
         * together in the initramdisk on / and then we'll
         * let the rc file figure out the rest.
         */
    // 创建设备节点
    mkdir("/dev", 0755);
    mkdir("/proc", 0755);
    mkdir("/sys", 0755);

    mount("tmpfs", "/dev", "tmpfs", MS_NOSUID, "mode=0755");
    mkdir("/dev/pts", 0755);
    mkdir("/dev/socket", 0755);
    mount("devpts", "/dev/pts", "devpts", 0, NULL);
    mount("proc", "/proc", "proc", 0, NULL);
    mount("sysfs", "/sys", "sysfs", 0, NULL);

        /* indicate that booting is in progress to background fw loaders, etc */
    close(open("/dev/.booting", O_WRONLY | O_CREAT, 0000));

        /* We must have some place other than / to create the
         * device nodes for kmsg and null, otherwise we won't
         * be able to remount / read-only later on.
         * Now that tmpfs is mounted on /dev, we can actually
         * talk to the outside world.
         */
    open_devnull_stdio();       // stdio/stdout/stderr都指向__null__设备
    klog_init();                // 从这里创建__kmsg__设备
    property_init();            // 1. 完成property的环境变量初始化等动作

    get_hardware_name(hardware, &revision);

    process_kernel_cmdline();   // 属性初始设置

    union selinux_callback cb;
    cb.func_log = klog_write;
    selinux_set_callback(SELINUX_CB_LOG, cb);

    cb.func_audit = audit_callback;
    selinux_set_callback(SELINUX_CB_AUDIT, cb);

    selinux_initialize();
    /* These directories were necessarily created before initial policy load
     * and therefore need their security context restored to the proper value.
     * This must happen before /dev is populated by ueventd.
     */
    restorecon("/dev");
    restorecon("/dev/socket");
    restorecon("/dev/__properties__");
    restorecon_recursive("/sys");

    is_charger = !strcmp(bootmode, "charger");      // 从bootloader中获取是否在充电的信息
    usb_charge_flag = is_charger;

    INFO("property init\n");
    if (!is_charger)
        property_load_boot_defaults();
	get_kernel_cmdline_partitions();
    get_kernel_cmdline_signature();
    INFO("reading config file\n");
    init_parse_config_file("/init.rc");

    action_for_each_trigger("early-init", action_add_queue_tail);

    queue_builtin_action(wait_for_coldboot_done_action, "wait_for_coldboot_done");
    queue_builtin_action(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng");
    queue_builtin_action(keychord_init_action, "keychord_init");

    /* execute all the boot actions to get us started */
    action_for_each_trigger("init", action_add_queue_tail);

    action_for_each_trigger("early-fs", action_add_queue_tail);
    /* skip mounting filesystems in charger mode */
    if (!is_charger) {
        // 显示initlog.rle,也就是android第二张图片
        queue_builtin_action(console_init_action, "console_init");
        action_for_each_trigger("fs", action_add_queue_tail);
        action_for_each_trigger("post-fs", action_add_queue_tail);
        action_for_each_trigger("post-fs-data", action_add_queue_tail);
        
        //SWAP TO ZRAM if low mem devices
        if (!(get_dram_size() > 512)) {
            char trigger[] = {"early-fs"};
            ERROR("***************************LOW MEM DEVICE DETECT");
            add_command(trigger, 2, args_swapon);
            char trigger2[] = {"post-fs-data"};
            add_command(trigger2, 3, args_write);
        }
    }

    /* Repeat mix_hwrng_into_linux_rng in case /dev/hw_random or /dev/random
     * wasn't ready immediately after wait_for_coldboot_done
     */
    queue_builtin_action(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng");

    queue_builtin_action(property_service_init_action, "property_service_init");
    queue_builtin_action(signal_init_action, "signal_init");
    queue_builtin_action(check_startup_action, "check_startup");

    if (is_charger) {
        // 如果是charger模式,则调用charger.c
        queue_builtin_action(console_init_action, "console_init");
        action_for_each_trigger("charger", action_add_queue_tail);
    } else {
        action_for_each_trigger("early-boot", action_add_queue_tail);
        action_for_each_trigger("boot", action_add_queue_tail);
    }

        /* run all property triggers based on current state of the properties */
    queue_builtin_action(queue_property_triggers_action, "queue_property_triggers");


#if BOOTCHART
    queue_builtin_action(bootchart_init_action, "bootchart_init");
#endif

    for(;;) {       // 监视事件 事件处理循环
        int nr, i, timeout = -1;

        execute_one_command();
        restart_processes();

        if (!property_set_fd_init && get_property_set_fd() > 0) {       // 通过套接字传递信息
            ufds[fd_count].fd = get_property_set_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            property_set_fd_init = 1;
        }
        if (!signal_fd_init && get_signal_fd() > 0) {
            ufds[fd_count].fd = get_signal_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            signal_fd_init = 1;
        }
        if (!keychord_fd_init && get_keychord_fd() > 0) {
            ufds[fd_count].fd = get_keychord_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            keychord_fd_init = 1;
        }

        if (process_needs_restart) {
            timeout = (process_needs_restart - gettime()) * 1000;
            if (timeout < 0)
                timeout = 0;
        }

        if (!action_queue_empty() || cur_action)
            timeout = 0;

#if BOOTCHART
        if (bootchart_count > 0) {
            if (timeout < 0 || timeout > BOOTCHART_POLLING_MS)
                timeout = BOOTCHART_POLLING_MS;
            if (bootchart_step() < 0 || --bootchart_count == 0) {
                bootchart_finish();
                bootchart_count = 0;
            }
        }
#endif

        nr = poll(ufds, fd_count, timeout);     // 获取事件(热插拔检测)
        if (nr <= 0)
            continue;

        for (i = 0; i < fd_count; i++) {                        // 处理套接字传回的信息
            if (ufds[i].revents & POLLIN) {
                if (ufds[i].fd == get_property_set_fd())        // 处理属性变更
                    handle_property_set_fd();
                else if (ufds[i].fd == get_keychord_fd())
                    handle_keychord();
                else if (ufds[i].fd == get_signal_fd())         // 处理子进程传回的信息
                    handle_signal();
            }
        }
    }

    return 0;
}
示例#7
0
int main(int argc, char **argv)
{
    int fd_count = 0;
    struct pollfd ufds[4];
    int property_set_fd_init = 0;
    int signal_fd_init = 0;
    int keychord_fd_init = 0;
    bool is_charger = false;

    if (!strcmp(basename(argv[0]), "ueventd"))
        return ueventd_main(argc, argv);

    if (!strcmp(basename(argv[0]), "watchdogd"))
        return watchdogd_main(argc, argv);

    /* clear the umask */
    umask(0);

        /* Get the basic filesystem setup we need put
         * together in the initramdisk on / and then we'll
         * let the rc file figure out the rest.
         */
    mkdir("/dev", 0755);
    mkdir("/proc", 0755);
    mkdir("/sys", 0755);

    mount("tmpfs", "/dev", "tmpfs", MS_NOSUID, "mode=0755");
    mkdir("/dev/pts", 0755);
    mkdir("/dev/socket", 0755);
    mount("devpts", "/dev/pts", "devpts", 0, NULL);
    mount("proc", "/proc", "proc", 0, NULL);
    mount("sysfs", "/sys", "sysfs", 0, NULL);

        /* indicate that booting is in progress to background fw loaders, etc */
    close(open("/dev/.booting", O_WRONLY | O_CREAT, 0000));

        /* We must have some place other than / to create the
         * device nodes for kmsg and null, otherwise we won't
         * be able to remount / read-only later on.
         * Now that tmpfs is mounted on /dev, we can actually
         * talk to the outside world.
         */
    open_devnull_stdio();
    klog_init();
    property_init();

    get_hardware_name(hardware, &revision);

    process_kernel_cmdline();

    union selinux_callback cb;
    cb.func_log = log_callback;
    selinux_set_callback(SELINUX_CB_LOG, cb);

    cb.func_audit = audit_callback;
    selinux_set_callback(SELINUX_CB_AUDIT, cb);

    selinux_initialize();
    /* These directories were necessarily created before initial policy load
     * and therefore need their security context restored to the proper value.
     * This must happen before /dev is populated by ueventd.
     */
    restorecon("/dev");
    restorecon("/dev/socket");
    restorecon("/dev/__properties__");
    restorecon_recursive("/sys");

    is_charger = !strcmp(bootmode, "charger");

    INFO("property init\n");
    property_load_boot_defaults();

    INFO("reading config file\n");
    init_parse_config_file("/init.rc");

    action_for_each_trigger("early-init", action_add_queue_tail);

    queue_builtin_action(wait_for_coldboot_done_action, "wait_for_coldboot_done");
    queue_builtin_action(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng");
    queue_builtin_action(keychord_init_action, "keychord_init");
    queue_builtin_action(console_init_action, "console_init");

    /* execute all the boot actions to get us started */
    action_for_each_trigger("init", action_add_queue_tail);

    /* Repeat mix_hwrng_into_linux_rng in case /dev/hw_random or /dev/random
     * wasn't ready immediately after wait_for_coldboot_done
     */
    queue_builtin_action(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng");
    queue_builtin_action(property_service_init_action, "property_service_init");
    queue_builtin_action(signal_init_action, "signal_init");

    /* Don't mount filesystems or start core system services if in charger mode. */
    if (is_charger) {
        action_for_each_trigger("charger", action_add_queue_tail);
    } else {
        action_for_each_trigger("late-init", action_add_queue_tail);
    }

    /* run all property triggers based on current state of the properties */
    queue_builtin_action(queue_property_triggers_action, "queue_property_triggers");


#if BOOTCHART
    queue_builtin_action(bootchart_init_action, "bootchart_init");
#endif

    for(;;) {
        int nr, i, timeout = -1;

        execute_one_command();
        restart_processes();

        if (!property_set_fd_init && get_property_set_fd() > 0) {
            ufds[fd_count].fd = get_property_set_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            property_set_fd_init = 1;
        }
        if (!signal_fd_init && get_signal_fd() > 0) {
            ufds[fd_count].fd = get_signal_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            signal_fd_init = 1;
        }
        if (!keychord_fd_init && get_keychord_fd() > 0) {
            ufds[fd_count].fd = get_keychord_fd();
            ufds[fd_count].events = POLLIN;
            ufds[fd_count].revents = 0;
            fd_count++;
            keychord_fd_init = 1;
        }

        if (process_needs_restart) {
            timeout = (process_needs_restart - gettime()) * 1000;
            if (timeout < 0)
                timeout = 0;
        }

        if (!action_queue_empty() || cur_action)
            timeout = 0;

#if BOOTCHART
        if (bootchart_count > 0) {
            long long current_time;
            int elapsed_time, remaining_time;

            current_time = bootchart_gettime();
            elapsed_time = current_time - bootchart_time;

            if (elapsed_time >= BOOTCHART_POLLING_MS) {
                /* count missed samples */
                while (elapsed_time >= BOOTCHART_POLLING_MS) {
                    elapsed_time -= BOOTCHART_POLLING_MS;
                    bootchart_count--;
                }
                /* count may be negative, take a sample anyway */
                bootchart_time = current_time;
                if (bootchart_step() < 0 || bootchart_count <= 0) {
                    bootchart_finish();
                    bootchart_count = 0;
                }
            }
            if (bootchart_count > 0) {
                remaining_time = BOOTCHART_POLLING_MS - elapsed_time;
                if (timeout < 0 || timeout > remaining_time)
                    timeout = remaining_time;
            }
        }
#endif

        nr = poll(ufds, fd_count, timeout);
        if (nr <= 0)
            continue;

        for (i = 0; i < fd_count; i++) {
            if (ufds[i].revents & POLLIN) {
                if (ufds[i].fd == get_property_set_fd())
                    handle_property_set_fd();
                else if (ufds[i].fd == get_keychord_fd())
                    handle_keychord();
                else if (ufds[i].fd == get_signal_fd())
                    handle_signal();
            }
        }
    }

    return 0;
}