示例#1
0
文件: vtimer.c 项目: jferreir/RIOT
static void vtimer_callback_msg(vtimer_t *timer)
{
    msg_t msg;
    msg.type = timer->type;
    msg.content.value = (unsigned int) timer->arg;
    msg_send_int(&msg, timer->pid);
}
示例#2
0
文件: pir.c 项目: JMR-b/RIOT
static void pir_send_msg(pir_t *dev, pir_event_t event)
{
    DEBUG("pir_send_msg\n");
    msg_t m = { .type = event, .content.ptr = (char*) dev, };

    int ret = msg_send_int(&m, dev->msg_thread_pid);
    DEBUG("pir_send_msg: msg_send_int: %i\n", ret);
    switch (ret) {
        case 0:
            DEBUG("pir_send_msg: msg_thread_pid not receptive, event is lost");
            break;
        case 1:
            DEBUG("pir_send_msg: OK");
            break;
        case -1:
            DEBUG("pir_send_msg: msg_thread_pid is gone, clearing it");
            dev->msg_thread_pid = KERNEL_PID_UNDEF;
            break;
    }
}

static void pir_callback(void *arg)
{
    DEBUG("pir_callback: %p\n", arg);
    pir_t *dev = (pir_t*) arg;
    if (dev->msg_thread_pid != KERNEL_PID_UNDEF) {
        pir_send_msg(dev, pir_get_status(dev));
    }
}
示例#3
0
文件: rtc.c 项目: 4dahalibut/RIOT
interrupt(RTC_VECTOR) __attribute__((naked)) rtc_isr(void)
{
    __enter_isr();

    /* RTC is save to write for up to one second now */
    if (RTCIV == RTC_RTCRDYIFG) {
        /* disable interrupt */
        //RTCCTL0 &= ~RTCRDYIE;

        if (set_time) {
            set_time = 0;
            /* set previous set time and reset it */
            RTCSEC = time_to_set.tm_sec;
            RTCMIN = time_to_set.tm_min;
            RTCHOUR = time_to_set.tm_hour;
            RTCDAY = time_to_set.tm_mday;
            RTCDOW = time_to_set.tm_wday;
            RTCMON = time_to_set.tm_mon + 1;
            RTCYEARL = (time_to_set.tm_year + 1900) & 0xFF;
            RTCYEARH = (time_to_set.tm_year + 1900) >> 0x08;
        }

        if (rtc_second_pid != KERNEL_PID_UNDEF) {
            static msg_t m;
            m.type = RTCSEC;
            msg_send_int(&m, rtc_second_pid);
        }
    }
    /* RTC alarm */
    else if (RTCIV == RTC_RTCAIFG) {
示例#4
0
文件: nrfmin.c 项目: kareem05/RIOT
/*
 * Radio interrupt routine
 */
void isr_radio(void)
{
    msg_t msg;

    if (NRF_RADIO->EVENTS_END == 1) {
        NRF_RADIO->EVENTS_END = 0;
        /* did we just send or receive something? */
        if (_state == STATE_RX) {
            /* drop packet on invalid CRC */
            if (NRF_RADIO->CRCSTATUS != 1) {
                return;
            }
            msg.type = NG_NETDEV_MSG_TYPE_EVENT;
            msg.content.value = ISR_EVENT_RX_DONE;
            msg_send_int(&msg, _netdev->mac_pid);
            /* switch buffer */
            _rx_next = _rx_next ^ 1;
            NRF_RADIO->PACKETPTR = (uint32_t)&(_rx_buf[_rx_next]);
            /* go back into receive mode */
            NRF_RADIO->TASKS_START = 1;
        }
        else if (_state == STATE_TX) {
            /* disable radio again */
            _switch_to_idle();
            /* if radio was receiving before, go back into RX state */
            if (_tx_prestate == STATE_RX) {
                _switch_to_rx();
            }
        }
    }
    if (sched_context_switch_request) {
        thread_yield();
    }
}
示例#5
0
void vtimer_callback(void *ptr) {
    vtimer_t *timer;
    in_callback = true;
    hwtimer_id = -1;

    timer = (vtimer_t *)queue_remove_head(&shortterm_queue_root);

#ifdef ENABLE_DEBUG
    vtimer_print(timer);
#endif
    DEBUG("vtimer_callback(): Shooting %lu.\n", timer->absolute.microseconds);

    /* shoot timer */
    if (timer->action == (void*) msg_send_int) {
        msg_t msg; 
        msg.type = MSG_TIMER;
        msg.content.value = (unsigned int) timer->arg;
        msg_send_int(&msg, timer->pid);
    } else {
        timer->action(timer->arg);
    }    

    in_callback = false;
    update_shortterm();
}
示例#6
0
void at86rf231_rx_handler(void)
{
    uint8_t lqi, fcs_rssi;
    // read packet length
    at86rf231_read_fifo(&at86rf231_rx_buffer[rx_buffer_next].length, 1);

    // read psdu, read packet with length as first byte and lqi as last byte.
    uint8_t *buf = buffer[rx_buffer_next];
    at86rf231_read_fifo(buf, at86rf231_rx_buffer[rx_buffer_next].length);

    // read lqi which is appended after the psdu
    lqi = buf[at86rf231_rx_buffer[rx_buffer_next].length - 1];

    // read fcs and rssi, from a register
    fcs_rssi = at86rf231_reg_read(AT86RF231_REG__PHY_RSSI);

    // build package
    at86rf231_rx_buffer[rx_buffer_next].lqi = lqi;
    // RSSI has no meaning here, it should be read during packet reception.
    at86rf231_rx_buffer[rx_buffer_next].rssi = fcs_rssi & 0x0F;  // bit[4:0]
    // bit7, boolean, 1 FCS valid, 0 FCS not valid
    at86rf231_rx_buffer[rx_buffer_next].crc = (fcs_rssi >> 7) & 0x01;

    if (at86rf231_rx_buffer[rx_buffer_next].crc == 0) {
        DEBUG("Got packet with invalid crc.\n");
        return;
    }

    ieee802154_frame_read(&buf[1], &at86rf231_rx_buffer[rx_buffer_next].frame,
                          at86rf231_rx_buffer[rx_buffer_next].length);

    if (at86rf231_rx_buffer[rx_buffer_next].frame.fcf.frame_type != 2) {
#if DEBUG_ENABLED
        ieee802154_frame_print_fcf_frame(&at86rf231_rx_buffer[rx_buffer_next].frame);
#endif

        /* notify transceiver thread if any */
        if (transceiver_pid) {
            msg_t m;
            m.type = (uint16_t) RCV_PKT_AT86RF231;
            m.content.value = rx_buffer_next;
            msg_send_int(&m, transceiver_pid);
        }
    }
    else {
#if DEBUG_ENABLED
        DEBUG("GOT ACK for SEQ %u\n", at86rf231_rx_buffer[rx_buffer_next].frame.seq_nr);
        ieee802154_frame_print_fcf_frame(&at86rf231_rx_buffer[rx_buffer_next].frame);
#endif
    }

    // shift to next buffer element
    if (++rx_buffer_next == AT86RF231_RX_BUF_SIZE) {
        rx_buffer_next = 0;
    }

    // Read IRQ to clear it
    at86rf231_reg_read(AT86RF231_REG__IRQ_STATUS);
}
示例#7
0
static void update_callback_default(uint8_t reg_c)
{
    if (update_pid != KERNEL_PID_UNDEF) {
        msg_t m;
        m.type = reg_c | (RTC_REG_B_INT_UPDATE << 8);
        m.content.value = update_msg_content;
        msg_send_int(&m, update_pid);
    }
}
示例#8
0
static void periodic_callback_default(uint8_t reg_c)
{
    if (periodic_pid != KERNEL_PID_UNDEF) {
        msg_t m;
        m.type = reg_c | (RTC_REG_B_INT_PERIODIC << 8);
        m.content.value = periodic_msg_content;
        msg_send_int(&m, periodic_pid);
    }
}
示例#9
0
static void alarm_callback_default(uint8_t reg_c)
{
    if (alarm_pid != KERNEL_PID_UNDEF) {
        msg_t m;
        m.type = reg_c | (RTC_REG_B_INT_ALARM << 8);
        m.content.value = alarm_msg_content;
        msg_send_int(&m, alarm_pid);
    }
}
示例#10
0
文件: msg.c 项目: AdamRLukaitis/RIOT
int msg_try_send(msg_t *m, kernel_pid_t target_pid)
{
    if (irq_is_in()) {
        return msg_send_int(m, target_pid);
    }
    if (sched_active_pid == target_pid) {
        return msg_send_to_self(m);
    }
    return _msg_send(m, target_pid, false, irq_disable());
}
示例#11
0
文件: msg.c 项目: michz/RIOT
int msg_send(msg_t *m, kernel_pid_t target_pid)
{
    if (inISR()) {
        return msg_send_int(m, target_pid);
    }
    if (sched_active_pid == target_pid) {
        return msg_send_to_self(m);
    }
    return _msg_send(m, target_pid, true, disableIRQ());
}
/* Run in interrupt context */
static void
gpio_cb(void *data)
{
    msg_t m;
    struct interrupt_data *int_data = data;

    int_data->base.refcount++;
    m.type = GPIO;
    m.content.ptr = data;
    msg_send_int(&m, pid);
}
/* Run in interrupt context */
static int
uart_tx_cb(void *data)
{
    msg_t m;
    struct uart_interrupt_data *int_data = data;

    int_data->base.refcount++;
    m.type = UART_TX;
    m.content.ptr = data;
    msg_send_int(&m, pid);
    return 0;
}
static void
interrupt_scheduler_notify_main_thread(uint16_t type, struct interrupt_data_base *handler)
{
    msg_t m;

    if (handler->pending)
        return;

    handler->pending = true;

    m.type = type;
    m.content.ptr = (char *)handler;
    msg_send_int(&m, pid);
}
示例#15
0
文件: pthread.c 项目: anishkt/RIOT
void pthread_exit(void *retval)
{
    pthread_t self_id = pthread_self();

    if (self_id == 0) {
        DEBUG("ERROR called pthread_self() returned 0 in \"%s\"!\n", __func__);
    }
    else {
        pthread_thread_t *self = pthread_sched_threads[self_id - 1];

        while (self->cleanup_top) {
            __pthread_cleanup_datum_t *ct = self->cleanup_top;
            self->cleanup_top = ct->__next;

            ct->__routine(ct->__arg);
        }

        /* Prevent linking in pthread_tls.o if no TSS functions were used. */
        extern void __pthread_keys_exit(int self_id) __attribute__((weak));
        if (__pthread_keys_exit) {
            __pthread_keys_exit(self_id);
        }

        self->thread_pid = KERNEL_PID_UNDEF;
        DEBUG("pthread_exit(%p), self == %p\n", retval, (void *) self);
        if (self->status != PTS_DETACHED) {
            self->returnval = retval;
            self->status = PTS_ZOMBIE;

            if (self->joining_thread) {
                /* our thread got an other thread waiting for us */
                thread_wakeup(self->joining_thread);
            }
        }

        dINT();
        if (self->stack) {
            msg_t m;
            m.content.ptr = self->stack;
            msg_send_int(&m, pthread_reaper_pid);
        }
    }

    sched_task_exit();
}
示例#16
0
void _nativenet_handle_packet(radio_packet_t *packet)
{
    radio_address_t dst_addr = packet->dst;

    /* address filter / monitor mode */
    if (_native_net_monitor == 1) {
        DEBUG("_nativenet_handle_packet: monitoring, not filtering address \n");
    }
    else {
        /* own addr check */
        if (dst_addr == _native_net_addr) {
            DEBUG("_nativenet_handle_packet: accept packet, addressed to us\n");
        }
        else if (dst_addr == 0) {
            DEBUG("_nativenet_handle_packet: accept packet, broadcast\n");
        }
        else {
            DEBUG("_nativenet_handle_packet: discard packet addressed to someone else\n");
            return;
        }
    }

    /* copy packet to rx buffer */
    DEBUG("\n\t\trx_buffer_next: %i\n\n", rx_buffer_next);
    memcpy(&_nativenet_rx_buffer[rx_buffer_next].data, packet->data, packet->length);
    memcpy(&_nativenet_rx_buffer[rx_buffer_next].packet, packet, sizeof(radio_packet_t));
    _nativenet_rx_buffer[rx_buffer_next].packet.data = (uint8_t *) &_nativenet_rx_buffer[rx_buffer_next].data;

    /* notify transceiver thread if any */
    if (_native_net_tpid) {
        DEBUG("_nativenet_handle_packet: notifying transceiver thread!\n");
        msg_t m;
        m.type = (uint16_t) RCV_PKT_NATIVE;
        m.content.value = rx_buffer_next;
        msg_send_int(&m, _native_net_tpid);
    }
    else {
        DEBUG("_nativenet_handle_packet: no one to notify =(\n");
    }

    /* shift to next buffer element */
    if (++rx_buffer_next == RX_BUF_SIZE) {
        rx_buffer_next = 0;
    }
}
示例#17
0
文件: ng_slip.c 项目: robby14/RIOT
/* UART callbacks */
static void _slip_rx_cb(void *arg, char data)
{
    if (data == _SLIP_END) {
        msg_t msg;

        msg.type = _SLIP_MSG_TYPE;
        msg.content.value = _SLIP_DEV(arg)->in_bytes;

        msg_send_int(&msg, _SLIP_DEV(arg)->slip_pid);

        _SLIP_DEV(arg)->in_bytes = 0;
    }

    if (_SLIP_DEV(arg)->in_esc) {
        _SLIP_DEV(arg)->in_esc = 0;

        switch (data) {
            case (_SLIP_END_ESC):
                if (ringbuffer_add_one(_SLIP_DEV(arg)->in_buf, _SLIP_END) < 0) {
                    _SLIP_DEV(arg)->in_bytes++;
                }

                break;

            case (_SLIP_ESC_ESC):
                if (ringbuffer_add_one(_SLIP_DEV(arg)->in_buf, _SLIP_ESC) < 0) {
                    _SLIP_DEV(arg)->in_bytes++;
                }

                break;

            default:
                break;
        }
    }
    else if (data == _SLIP_ESC) {
        _SLIP_DEV(arg)->in_esc = 1;
    }
    else {
        if (ringbuffer_add_one(_SLIP_DEV(arg)->in_buf, data) < 0) {
            _SLIP_DEV(arg)->in_bytes++;
        }
    }
}
/* Run in interrupt context */
static void
uart_rx_cb(void *data, char char_read)
{
    msg_t m;
    struct uart_interrupt_data *int_data = data;
    struct uart_rx_interrupt_data *rx_int_data = malloc(sizeof(struct uart_rx_interrupt_data));

    rx_int_data = malloc(sizeof(struct uart_rx_interrupt_data));
    if (!rx_int_data)
        return;

    rx_int_data->uart_int = int_data;
    rx_int_data->char_read = char_read;

    int_data->base.refcount++;
    m.type = UART_RX;
    m.content.ptr = (char *)rx_int_data;
    msg_send_int(&m, pid);
}
示例#19
0
void pthread_exit(void *retval)
{
    pthread_t self_id = pthread_self();

    if (self_id == 0) {
        DEBUG("ERROR called pthread_self() returned 0 in \"%s\"!\n", __func__);
    }
    else {
        pthread_thread_t *self = pthread_sched_threads[self_id-1];

        while (self->cleanup_top) {
            __pthread_cleanup_datum_t *ct = self->cleanup_top;
            self->cleanup_top = ct->__next;

            ct->__routine(ct->__arg);
        }

        self->thread_pid = KERNEL_PID_NULL;
        DEBUG("pthread_exit(%p), self == %p\n", retval, (void *) self);
        if (self->status != PTS_DETACHED) {
            self->returnval = retval;
            self->status = PTS_ZOMBIE;

            if (self->joining_thread) {
                /* our thread got an other thread waiting for us */
                thread_wakeup(self->joining_thread);
            }
        }

        dINT();
        if (self->stack) {
            msg_t m;
            m.content.ptr = self->stack;
            msg_send_int(&m, pthread_reaper_pid);
        }
    }

    sched_task_exit();
}
示例#20
0
void cc110x_rx_handler(void) {
    uint8_t res = 0;

	// Possible packet received, RX -> IDLE (0.1 us)
	rflags.CAA      = 0;
	rflags.MAN_WOR  = 0;
	cc110x_statistic.packets_in++;

	res = receive_packet((uint8_t*)&(cc110x_rx_buffer[rx_buffer_next].packet), sizeof(cc110x_packet_t));
	if (res) {
        // If we are sending a burst, don't accept packets.
		// Only ACKs are processed (for stopping the burst).
		// Same if state machine is in TX lock.
		if (radio_state == RADIO_SEND_BURST || rflags.TX)
		{
			cc110x_statistic.packets_in_while_tx++;
			return;
		}

        cc110x_rx_buffer[rx_buffer_next].rssi = rflags._RSSI;
        cc110x_rx_buffer[rx_buffer_next].lqi = rflags._LQI;
		cc110x_strobe(CC1100_SFRX);		// ...for flushing the RX FIFO

		// Valid packet. After a wake-up, the radio should be in IDLE.
		// So put CC1100 to RX for WOR_TIMEOUT (have to manually put
		// the radio back to sleep/WOR).
		//cc110x_spi_write_reg(CC1100_MCSM0, 0x08);	// Turn off FS-Autocal
		cc110x_write_reg(CC1100_MCSM2, 0x07);	// Configure RX_TIME (until end of packet)
        cc110x_strobe(CC1100_SRX);
        hwtimer_wait(IDLE_TO_RX_TIME);
        radio_state = RADIO_RX;
        
#ifdef DBG_IGNORE
        if (is_ignored(cc110x_rx_buffer[rx_buffer_next].packet.phy_src)) {
            LED_RED_TOGGLE;
            return;
        }
#endif

        /* notify transceiver thread if any */
        if (transceiver_pid) {
            msg_t m;  
            m.type = (uint16_t) RCV_PKT_CC1100;
            m.content.value = rx_buffer_next;
            msg_send_int(&m, transceiver_pid);
        }

        /* shift to next buffer element */
        if (++rx_buffer_next == RX_BUF_SIZE) {
            rx_buffer_next = 0;
        }
        return;
    }
	else
	{
		// No ACK received so TOF is unpredictable
		rflags.TOF = 0;

		// CRC false or RX buffer full -> clear RX FIFO in both cases
		cc110x_strobe(CC1100_SIDLE);	// Switch to IDLE (should already be)...
		cc110x_strobe(CC1100_SFRX);		// ...for flushing the RX FIFO

		// If packet interrupted this nodes send call,
		// don't change anything after this point.
		if (radio_state == RADIO_AIR_FREE_WAITING)
		{
			cc110x_strobe(CC1100_SRX);
			hwtimer_wait(IDLE_TO_RX_TIME);
			return;
		}
		// If currently sending, exit here (don't go to RX/WOR)
		if (radio_state == RADIO_SEND_BURST)
		{
			cc110x_statistic.packets_in_while_tx++;
			return;
		}

		// No valid packet, so go back to RX/WOR as soon as possible
		cc110x_switch_to_rx();
	}
}
示例#21
0
void cc110x_rx_handler(void *args)
{
    uint8_t res = 0;

    /* Possible packet received, RX -> IDLE (0.1 us) */
    cc110x_statistic.packets_in++;

    res = receive_packet((uint8_t *)&(cc110x_rx_buffer[rx_buffer_next].packet),
            sizeof(cc110x_packet_t));

    if (res) {
        /* If we are sending a burst, don't accept packets.
         * Only ACKs are processed (for stopping the burst).
         * Same if state machine is in TX lock. */
        if (radio_state == RADIO_SEND_BURST) {
            cc110x_statistic.packets_in_while_tx++;
            return;
        }

        cc110x_rx_buffer[rx_buffer_next].rssi = rflags._RSSI;
        cc110x_rx_buffer[rx_buffer_next].lqi = rflags._LQI;
        cc110x_strobe(CC1100_SFRX);     /* ...for flushing the RX FIFO */

        /* Valid packet. After a wake-up, the radio should be in IDLE.
         * So put CC110x to RX for WOR_TIMEOUT (have to manually put
         * the radio back to sleep/WOR). */
        cc110x_write_reg(CC1100_MCSM2, 0x07);   /* Configure RX_TIME (until end of packet) */
        cc110x_strobe(CC1100_SRX);
        hwtimer_wait(IDLE_TO_RX_TIME);
        radio_state = RADIO_RX;

#ifdef MODULE_TRANSCEIVER
        /* notify transceiver thread if any */
        if (transceiver_pid != KERNEL_PID_UNDEF) {
            msg_t m;
            m.type = (uint16_t) RCV_PKT_CC1100;
            m.content.value = rx_buffer_next;
            msg_send_int(&m, transceiver_pid);
        }
#endif

#ifdef MODULE_NETDEV_BASE
        if (cc110x_recv_cb != NULL) {
            cc110x_packet_t p = cc110x_rx_buffer[rx_buffer_next].packet;
            cc110x_recv_cb(&cc110x_dev, &p.phy_src, sizeof(uint8_t), &p.address,
                    sizeof(uint8_t), p.data, p.length - CC1100_HEADER_LENGTH);
        }
#endif

        /* shift to next buffer element */
        if (++rx_buffer_next == RX_BUF_SIZE) {
            rx_buffer_next = 0;
        }

        return;
    }
    else {
        /* CRC false or RX buffer full -> clear RX FIFO in both cases */
        cc110x_strobe(CC1100_SIDLE);    /* Switch to IDLE (should already be)... */
        cc110x_strobe(CC1100_SFRX);     /* ...for flushing the RX FIFO */

        /* If currently sending, exit here (don't go to RX/WOR) */
        if (radio_state == RADIO_SEND_BURST) {
            cc110x_statistic.packets_in_while_tx++;
            return;
        }

        /* No valid packet, so go back to RX/WOR as soon as possible */
        cc110x_switch_to_rx();
    }
}
示例#22
0
void uart0_notify_thread(void)
{
    msg_t m;
    m.type = 0;
    msg_send_int(&m, uart0_handler_pid);
}
示例#23
0
文件: msg.c 项目: swp2013riot/RIOT
int msg_send(msg_t *m, unsigned int target_pid, bool block)
{
    if(inISR()) {
        return msg_send_int(m, target_pid);
    }

    tcb_t *target = (tcb_t*) sched_threads[target_pid];

    m->sender_pid = thread_pid;

    if(m->sender_pid == target_pid) {
        return -1;
    }

    if(target == NULL) {
        return -1;
    }

    dINT();

    if(target->status !=  STATUS_RECEIVE_BLOCKED) {
        if(target->msg_array && queue_msg(target, m)) {
            eINT();
            return 1;
        }

        if(!block) {
            DEBUG("%s: receiver not waiting. block=%u\n", active_thread->name, block);
            eINT();
            return 0;
        }

        DEBUG("%s: send_blocked.\n", active_thread->name);
        queue_node_t n;
        n.priority = active_thread->priority;
        n.data = (unsigned int) active_thread;
        DEBUG("%s: Adding node to msg_waiters:\n", active_thread->name);

        queue_priority_add(&(target->msg_waiters), &n);

        active_thread->wait_data = (void*) m;

        int newstatus;

        if(active_thread->status == STATUS_REPLY_BLOCKED) {
            newstatus = STATUS_REPLY_BLOCKED;
        }
        else {
            newstatus = STATUS_SEND_BLOCKED;
        }

        sched_set_status((tcb_t*) active_thread,  newstatus);

        DEBUG("%s: back from send block.\n", active_thread->name);
    }
    else {
        DEBUG("%s: direct msg copy.\n", active_thread->name);
        /* copy msg to target */
        msg_t *target_message = (msg_t*) target->wait_data;
        *target_message = *m;
        sched_set_status(target,  STATUS_PENDING);
    }

    eINT();
    thread_yield();

    return 1;
}
示例#24
0
文件: xbee.c 项目: l3nko/RIOT
/*
 * Interrupt callbacks
 */
static void _rx_cb(void *arg, char _c)
{
    unsigned char c = _c;
    xbee_t *dev = (xbee_t *)arg;
    msg_t msg;

    switch (dev->int_state) {
        case XBEE_INT_STATE_IDLE:
            /* check for beginning of new data frame */
            if (c == API_START_DELIMITER) {
                dev->int_state = XBEE_INT_STATE_SIZE1;
            }
            break;
        case XBEE_INT_STATE_SIZE1:
            dev->int_size = ((uint16_t)c) << 8;
            dev->int_state = XBEE_INT_STATE_SIZE2;
            break;
        case XBEE_INT_STATE_SIZE2:
            dev->int_size += (uint8_t)c;
            dev->int_state = XBEE_INT_STATE_TYPE;
            break;
        case XBEE_INT_STATE_TYPE:
            if (c == API_ID_RX_SHORT_ADDR || c == API_ID_RX_LONG_ADDR) {
                /* in case old data was not processed, ignore incoming data */
                if (dev->rx_count != 0) {
                    dev->int_state = XBEE_INT_STATE_IDLE;
                    return;
                }
                dev->rx_limit = dev->int_size + 1;
                dev->rx_buf[dev->rx_count++] = (uint8_t)c;
                dev->int_state = XBEE_INT_STATE_RX;
            }
            else if (c == API_ID_AT_RESP) {
                dev->resp_limit = dev->int_size;
                dev->int_state = XBEE_INT_STATE_RESP;
            }
            else {
                dev->int_state = XBEE_INT_STATE_IDLE;
            }
            break;
        case XBEE_INT_STATE_RESP:
            dev->resp_buf[dev->resp_count++] = (uint8_t)c;
            if (dev->resp_count == dev->resp_limit) {
                /* here we ignore the checksum to prevent deadlocks */
                mutex_unlock(&(dev->resp_lock));
                dev->int_state = XBEE_INT_STATE_IDLE;
            }
            break;
        case XBEE_INT_STATE_RX:
            dev->rx_buf[dev->rx_count++] = (uint8_t)c;
            if (dev->rx_count == dev->rx_limit) {
                /* packet is complete */
                msg.type = GNRC_NETDEV_MSG_TYPE_EVENT;
                msg.content.value = ISR_EVENT_RX_DONE;
                msg_send_int(&msg, dev->mac_pid);
                dev->int_state = XBEE_INT_STATE_IDLE;
            }
            break;
        default:
            /* this should never be the case */
            break;
    }
}
示例#25
0
文件: msg.c 项目: SatokiOgiso/RIOT
int msg_send(msg_t *m, unsigned int target_pid, bool block)
{
    if (inISR()) {
        return msg_send_int(m, target_pid);
    }

    if ((unsigned int)sched_active_pid == target_pid) {
        return msg_send_to_self(m);
    }

    dINT();

    tcb_t *target = (tcb_t*) sched_threads[target_pid];

    m->sender_pid = sched_active_pid;

    if (target == NULL) {
        DEBUG("msg_send(): target thread does not exist\n");
        eINT();
        return -1;
    }

    DEBUG("msg_send() %s:%i: Sending from %i to %i. block=%i src->state=%i target->state=%i\n", __FILE__, __LINE__, sched_active_pid, target_pid, block, sched_active_thread->status, target->status);

    if (target->status != STATUS_RECEIVE_BLOCKED) {
        DEBUG("msg_send() %s:%i: Target %i is not RECEIVE_BLOCKED.\n", __FILE__, __LINE__, target_pid);
        if (target->msg_array && queue_msg(target, m)) {
            DEBUG("msg_send() %s:%i: Target %i has a msg_queue. Queueing message.\n", __FILE__, __LINE__, target_pid);
            eINT();
            if (sched_active_thread->status == STATUS_REPLY_BLOCKED) {
                thread_yield();
            }
            return 1;
        }

        if (!block) {
            DEBUG("msg_send: %s: Receiver not waiting, block=%u\n", sched_active_thread->name, block);
            eINT();
            return 0;
        }

        DEBUG("msg_send: %s: send_blocked.\n", sched_active_thread->name);
        queue_node_t n;
        n.priority = sched_active_thread->priority;
        n.data = (unsigned int) sched_active_thread;
        n.next = NULL;
        DEBUG("msg_send: %s: Adding node to msg_waiters:\n", sched_active_thread->name);

        queue_priority_add(&(target->msg_waiters), &n);

        sched_active_thread->wait_data = (void*) m;

        int newstatus;

        if (sched_active_thread->status == STATUS_REPLY_BLOCKED) {
            newstatus = STATUS_REPLY_BLOCKED;
        }
        else {
            newstatus = STATUS_SEND_BLOCKED;
        }

        sched_set_status((tcb_t*) sched_active_thread, newstatus);

        DEBUG("msg_send: %s: Back from send block.\n", sched_active_thread->name);
    }
    else {
        DEBUG("msg_send: %s: Direct msg copy from %i to %i.\n", sched_active_thread->name, thread_getpid(), target_pid);
        /* copy msg to target */
        msg_t *target_message = (msg_t*) target->wait_data;
        *target_message = *m;
        sched_set_status(target, STATUS_PENDING);
    }

    eINT();
    thread_yield();

    return 1;
}