示例#1
0
文件: utils.c 项目: Rventric/opendias
char *dateHuman(char *a, char *b, char *c, const char *LOCAL_no_date_set) {

    // This will need to be converted, to use current users 'lang' LOCALE

    char *m;

    if( 0 != strcmp(a, "NULL") && 0 != strcmp(b, "NULL") && 0 != strcmp(c, "NULL")) {
        if(strlen(b) == 1) {
            m = o_strdup("0");
            conCat(&m, b);
            free(b);
            b = m;
        }
        if(strlen(c) == 1) {
            m = o_strdup("0");
            conCat(&m, c);
            free(c);
            c = m;
        }
        conCat(&a, "/");
        conCat(&a, b);
        conCat(&a, "/");
        conCat(&a, c);
        free(b);
        free(c);
        return a;
    }
    else {
        free(a);
        free(b);
        free(c);
        return o_strdup(LOCAL_no_date_set);
    }
}
示例#2
0
文件: dbaccess.c 项目: skm42/opendias
extern char *getTagId(char *tagname) {

  struct simpleLinkedList *vars, *rSet;
  char *sql2, *ret = NULL;
  char *sql = o_printf("SELECT tagid FROM tags WHERE tagname = '%s'", tagname);

  rSet = runquery_db(sql);
  if( rSet != NULL ) {
    ret = o_strdup(readData_db(rSet, "tagid"));
  }
  else {
    o_log(DEBUGM, "no tag was found. Adding a new one.");
    sql2 = o_strdup("INSERT INTO tags (tagname) VALUES (?)");

    vars = sll_init();
    sll_append(vars, DB_TEXT );
    sll_append(vars, tagname );

    runUpdate_db(sql2, vars);
    free(sql2);

    ret = itoa(last_insert(), 10);
  }
  free_recordset( rSet );
  free(sql);

  o_log(DEBUGM, "Using tagid of %s", ret);
  return ret;
}
示例#3
0
// Create a new session
// FIXME - This is currently open to a DoS attack.
//         but since we have a session limit, just for opendias.
char *create_session() {
  char *session_id;

  // Check upper session count limit
  int current_session_count = sll_count( sll_findFirstElement( sessions ) );
  o_log( DEBUGM, "There are currently %d active sessions", current_session_count);
  if( current_session_count > MAX_SESSIONS ) {
    return NULL;
  }

  // Generate session key
  uuid_t uu;
  char *sid = malloc(36+1);
  uuid_generate(uu);
  uuid_unparse(uu, sid);
  session_id = o_strdup(sid);
  free(sid);
  o_log(DEBUGM, "Generated new session: %s", session_id );

  // Create new session structure
  struct session_data *session_element = malloc( sizeof(struct session_data) );
  session_element->last_accessed = time(NULL);
  session_element->session_container = sll_init();

  // Save and return
  sll_insert( sessions, o_strdup(session_id), session_element );
  return session_id;
}
示例#4
0
文件: utils.c 项目: Rventric/opendias
void addFileExt(char **fname, int ftype) {

    char *ext;

    if(ftype == SCAN_FILETYPE) ext = o_strdup(".jpg");
    else if(ftype == PDF_FILETYPE) ext = o_strdup(".pdf");
    else if(ftype == ODF_FILETYPE) ext = o_strdup(".odt");
    else if(ftype == JPG_FILETYPE) ext = o_strdup(".jpg");
    else ext = o_strdup(".WILLNEVERHAPPEN");

    conCat(fname, ext);
    free(ext);
}
示例#5
0
文件: scanner.c 项目: skm42/opendias
extern const char *get_status_string (SANE_Status status) {
    struct {
        SANE_Status status;
        const char *name;
    } status_names[] = {
        { SANE_STATUS_GOOD,          "SANE_STATUS_GOOD"},
        { SANE_STATUS_UNSUPPORTED,   "SANE_STATUS_UNSUPPORTED"},
        { SANE_STATUS_CANCELLED,     "SANE_STATUS_CANCELLED"},
        { SANE_STATUS_DEVICE_BUSY,   "SANE_STATUS_DEVICE_BUSY"},
        { SANE_STATUS_INVAL,         "SANE_STATUS_INVAL"},
        { SANE_STATUS_EOF,           "SANE_STATUS_EOF"},
        { SANE_STATUS_JAMMED,        "SANE_STATUS_JAMMED"},
        { SANE_STATUS_NO_DOCS,       "SANE_STATUS_NO_DOCS"},
        { SANE_STATUS_COVER_OPEN,    "SANE_STATUS_COVER_OPEN"},
        { SANE_STATUS_IO_ERROR,      "SANE_STATUS_IO_ERROR"},
        { SANE_STATUS_NO_MEM,        "SANE_STATUS_NO_MEM"},
        { SANE_STATUS_ACCESS_DENIED, "SANE_STATUS_ACCESS_DENIED"},
        { -1,                        NULL}
    };
    static char *unknown_string = NULL;
    int i;

    for (i = 0; status_names[i].name != NULL && status_names[i].status != status; i++);

    if (status_names[i].name == NULL) {
        free (unknown_string);
        unknown_string = o_strdup("");
        o_concatf (&unknown_string, "SANE_ACTION(%d)", status);
        return unknown_string; /* Note result is undefined on second call to this function */
    }

    return status_names[i].name;
}
示例#6
0
/**
 * Check if all mandatory configuration parameters are present and correct
 * Initialize some parameters with default value if not set
 */
int check_config(struct config_elements * config) {

  if (config->instance->port == 1) {
    config->instance->port = GARETH_DEFAULT_PORT;
  }
  
  if (config->url_prefix == NULL) {
    config->url_prefix = o_strdup(GARETH_DEFAULT_PREFIX);
    if (config->url_prefix == NULL) {
      fprintf(stderr, "Error allocating url_prefix, exit\n");
      return 0;
    }
  }
  
  if (config->log_mode == Y_LOG_MODE_NONE) {
    config->log_mode = Y_LOG_MODE_CONSOLE;
  }
  
  if (config->log_level == Y_LOG_LEVEL_NONE) {
    config->log_level = Y_LOG_LEVEL_ERROR;
  }
  
  if (config->log_mode == Y_LOG_MODE_FILE && config->log_file == NULL) {
    fprintf(stderr, "Error, you must specify a log file if log mode is set to file\n");
    print_help(stderr);
    return 0;
  }
  
  return 1;
}
示例#7
0
文件: scan.c 项目: Rventric/opendias
void ocrImage( char *uuid, int docid, int page, int request_resolution, PIX *pix, char *lang ) {
  char *ocrText;
  char *ocrLang;

  ocrLang = getScanParam(uuid, SCAN_PARAM_DO_OCR);
#ifdef CAN_OCR
  if(ocrLang && 0 != strcmp(ocrLang, "-") ) {

    if(request_resolution >= 300 && request_resolution <= 400) {
      char *ocrScanText;

      o_log(INFORMATION, "Attempting OCR in lang of %s", ocrLang);
      updateScanProgress(uuid, SCAN_PERFORMING_OCR, 10);

      ocrScanText = getTextFromImage(pix, request_resolution, ocrLang);

      ocrText = o_printf( getString("LOCAL_page_delimiter", lang), page, ocrScanText);
      free(ocrScanText);
    }
    else {
      o_log(DEBUGM, "OCR was requested, but the specified resolution means it's not safe to be attempted");
      ocrText = o_printf( getString("LOCAL_resolution_outside_range_to_attempt_ocr", lang) );
    }
  }
  else
#endif /* CAN_OCR */
    ocrText = o_strdup("");
  free(ocrLang);

  updateScanProgress(uuid, SCAN_DB_WORKING, 0);
  updateNewScannedPage(docid, ocrText, page);
  free(ocrText);

}
示例#8
0
文件: dbaccess.c 项目: skm42/opendias
extern void removeDoc (char *docid) {
  char *sql = o_strdup("DELETE FROM docs WHERE docid = ?");
  int docid_i = atoi(docid);

  struct simpleLinkedList *vars = sll_init();
  sll_append(vars, DB_INT );
  sll_append(vars, &docid_i );

  runUpdate_db(sql, vars);
  free(sql);
}
示例#9
0
文件: dbaccess.c 项目: skm42/opendias
extern void deleteTag( char *tagid ) {
  char *sql = o_strdup("DELETE FROM tags WHERE tagid = ?");
  int tagid_i = atoi(tagid);

  struct simpleLinkedList *vars = sll_init();
  sll_append(vars, DB_INT );
  sll_append(vars, &tagid_i );

  runUpdate_db(sql, vars);
  free(sql);
}
示例#10
0
文件: dbaccess.c 项目: skm42/opendias
extern void addLocation(char *location, int role) {

  char *sql = o_strdup("INSERT INTO location_access (location, role) VALUES (?, ?);");
  struct simpleLinkedList *vars = sll_init();
  sll_append(vars, DB_TEXT );
  sll_append(vars, location );
  sll_append(vars, DB_INT );
  sll_append(vars, &role );

  runUpdate_db(sql, vars);
  free(sql);
}
示例#11
0
文件: scan.c 项目: Rventric/opendias
void sane_worker( char *command, char *param ) {

  char *response;

  if( SANE_STATUS_GOOD != sane_init(NULL, NULL) ) {
    o_log( ERROR, "Could not start sane");
  }

  // Get a list of scanners
  if ( command && 0 == strcmp(command, "internalGetScannerList") ) {
    response = internalGetScannerList( param );
  }

  // Get scanner details (attributes)
  else if ( command && 0 == strcmp(command, "internalGetScannerDetails") ) {
    char *deviceid = strtok(o_strdup(param), ","); // device
    char *lang = strtok( NULL, ","); // lang
    response = internalGetScannerDetails( deviceid, lang );
    free( deviceid );
  }

  // Scan a page
  else if ( command && 0 == strcmp(command, "internalDoScanningOperation") ) {
    char *uuid = strtok(o_strdup(param), ","); // uuid
    char *lang = strtok( NULL, ","); // lang
    response = internalDoScanningOperation( uuid, lang );
    free( uuid );
  }

  else {
    o_log( ERROR, "Unknown Command");
    response = o_strdup("ERROR");
  }

  sane_exit();

  // POST RESPONSE ON STDOUT
  printf("%s", response);
  free(response);
}
示例#12
0
char *xmlToText(char *xml, size_t size) {

  char *text = o_strdup("");

  xmlDocPtr doc = xmlParseMemory(xml, (int)size);
  xmlNodePtr root = xmlDocGetRootElement(doc);

  xmlAllNodeGetContent(root, &text);

  xmlFreeDoc(doc);
  xmlCleanupParser();

  return text;
}
示例#13
0
char *extractThumbnail(char *docid) {

  char *source_file, *target_file, *ocrText;

  source_file = o_printf("%s/scans/%s.pdf", BASE_DIR, docid); 
  target_file = o_printf("%s/scans/%s_thumb.jpg", BASE_DIR, docid);

  ocrText = parse_pdf( source_file, target_file ); // pdf_plug.cc [create thumbnail and return body text] 
  free(ocrText);

  free(source_file);
  free(target_file);

  return o_strdup("<?xml version='1.0' encoding='utf-8'?>\n<Response><RegenerateThumb><result>OK</result></RegenerateThumb></Response>");
}
示例#14
0
文件: dbaccess.c 项目: skm42/opendias
extern void addScanProgress (char *uuid) {

  char *sql = o_strdup("INSERT INTO scan_progress (client_id, status, value) VALUES (?, ?, 0);");

  int t1 = SCAN_IDLE;
  int *t = &t1;

  struct simpleLinkedList *vars = sll_init();
  sll_append(vars, DB_TEXT );
  sll_append(vars, uuid );
  sll_append(vars, DB_INT );
  sll_append(vars, t );

  runUpdate_db(sql, vars);
  free(sql);
}
示例#15
0
文件: dbaccess.c 项目: skm42/opendias
extern void updateNewScannedPage (int docid, char *ocrText, int page) {

  char *sql = o_strdup("UPDATE docs SET pages = ?, ocrText = ocrText || ? WHERE docid = ?");

  struct simpleLinkedList *vars = sll_init();
  sll_append(vars, DB_INT );
  sll_append(vars, &page );
  sll_append(vars, DB_TEXT );
  sll_append(vars, ocrText );
  sll_append(vars, DB_INT );
  sll_append(vars, &docid );

  runUpdate_db(sql, vars);
  free(sql);

}
示例#16
0
char *get_odf_Text (const char *filename) {

  char *text;
  char *xml;
  size_t size;

  size = getEntry(filename, "content.xml", &xml);
  o_log(DEBUGM, "Found message of size %d. Message reads\n %s", size, xml);
  if(size > 0) {
    text = xmlToText(xml, size);
  }
  else {
    text = o_strdup("");
  }

  free(xml);
  return text;
}
示例#17
0
文件: dbaccess.c 项目: skm42/opendias
extern char *getScanParam(char *scanid, int param_option) {

  char *sql, *vvalue = NULL;
  struct simpleLinkedList *rSet;

  sql = o_printf("SELECT param_value \
                  FROM scan_params \
                  WHERE client_id = '%s' \
                  AND param_option = %i", scanid, param_option);

  rSet = runquery_db(sql);
  if( rSet ) {
    vvalue = o_strdup(readData_db(rSet, "param_value"));
  }
  free_recordset( rSet );
  free(sql);

  return vvalue;
}
示例#18
0
void update_config_option( char *option, char *value ) {
  char *sql = o_strdup("update config SET config_value = ? WHERE config_option = ?"); 
  struct simpleLinkedList *vars = sll_init();

	o_log(DEBUGM,"entering update_config_option\n");

  sll_append(vars, DB_TEXT );
  sll_append(vars, value );
  sll_append(vars, DB_TEXT );
  sll_append(vars, option );

  o_log(INFORMATION, "|Attempting to set config option '%s' to '%s'", option, value);
  if( runUpdate_db(sql, vars) ) {
    o_log(INFORMATION, "|    Failed!");
  }
  else {
    o_log(INFORMATION, "|    Successful.");
  }
  free(sql);
	o_log(DEBUGM,"leaving update_config_option\n");
}
示例#19
0
文件: scanner.c 项目: skm42/opendias
extern const char *get_action_string (SANE_Action action) {
    struct {
        SANE_Action action;
        const char *name;
    } action_names[] = {
        { SANE_ACTION_GET_VALUE, "SANE_ACTION_GET_VALUE" },
        { SANE_ACTION_SET_VALUE, "SANE_ACTION_SET_VALUE" },
        { SANE_ACTION_SET_AUTO,  "SANE_ACTION_SET_AUTO" },
        { -1,                    NULL}
    };
    static char *unknown_string = NULL;
    int i;

    for (i = 0; action_names[i].name != NULL && action_names[i].action != action; i++);

    if (action_names[i].name == NULL) {
        free (unknown_string);
        unknown_string = o_strdup("");
        o_concatf (&unknown_string, "SANE_ACTION(%d)", action);
        return unknown_string; /* Note result is undefined on second call to this function */
    }

    return action_names[i].name;
}
示例#20
0
文件: scanner.c 项目: skm42/opendias
extern SANE_Status control_option (SANE_Handle handle, const SANE_Option_Descriptor *option, SANE_Int index, SANE_Action action, void *value, int *ret) {
    SANE_Status status;
    char *old_value;

    switch (option->type) {
    case SANE_TYPE_BOOL:
        old_value = o_printf (*((SANE_Bool *) value) ? "SANE_TRUE" : "SANE_FALSE");
        break;
    case SANE_TYPE_INT:
        old_value = o_printf ("%d", *((SANE_Int *) value));
        break;
    case SANE_TYPE_FIXED:
        old_value = o_printf ("%f", SANE_UNFIX (*((SANE_Fixed *) value)));
        break;
    case SANE_TYPE_STRING:
        old_value = o_printf ("\"%s\"", (char *) value);
        break;
    default:
        old_value = o_strdup ("?");
        break;
    }

    status = sane_control_option (handle, index, action, value, ret);

    switch (option->type) {
    case SANE_TYPE_BOOL:
        o_log(DEBUGM, "sane_control_option (%d, %s, %s) -> (%s, %s)",
                 index, get_action_string (action),
                 *((SANE_Bool *) value) ? "SANE_TRUE" : "SANE_FALSE",
                 get_status_string (status),
                 old_value);
        break;
    case SANE_TYPE_INT:
        o_log(DEBUGM, "sane_control_option (%d, %s, %d) -> (%s, %s)",
                 index, get_action_string (action),
                 *((SANE_Int *) value),
                 get_status_string (status),
                 old_value);
        break;
    case SANE_TYPE_FIXED:
        o_log(DEBUGM, "sane_control_option (%d, %s, %f) -> (%s, %s)",
                 index, get_action_string (action),
                 SANE_UNFIX (*((SANE_Fixed *) value)),
                 get_status_string (status),
                 old_value);
        break;
    case SANE_TYPE_STRING:
        o_log(DEBUGM, "sane_control_option (%d, %s, \"%s\") -> (%s, %s)",
                 index, get_action_string (action),
                 (char *) value,
                 get_status_string (status),
                 old_value);
        break;
    default:
        break;
    }

    free (old_value);

    if (status != SANE_STATUS_GOOD)
        o_log(WARNING, "Error setting option %s: %s", option->name, sane_strstatus(status));

    return status;
}
示例#21
0
文件: scanner.c 项目: skm42/opendias
extern void log_option (SANE_Int index, const SANE_Option_Descriptor *option) {
    char *string;
    SANE_Word i;
    SANE_Int cap;
    
    string = o_strdup("");
    o_concatf (&string, "Option %d:", index);
    
    if (option->name)    
        o_concatf (&string, " name='%s'", option->name);
    
    if (option->title)
        o_concatf (&string, " title='%s'", option->title);

    switch (option->type) {
    case SANE_TYPE_BOOL:
        conCat(&string, " type=bool");
        break;
    case SANE_TYPE_INT:
        conCat(&string, " type=int");
        break;
    case SANE_TYPE_FIXED:
        conCat(&string, " type=fixed");        
        break;
    case SANE_TYPE_STRING:
        conCat(&string, " type=string");        
        break;
    case SANE_TYPE_BUTTON:
        conCat(&string, " type=button");        
        break;
    case SANE_TYPE_GROUP:
        conCat(&string, " type=group");
        break;
    default:
        o_concatf (&string, " type=%d", option->type);
        break;
    }
    
    o_concatf (&string, " size=%d", option->size);

    switch (option->unit) {
    case SANE_UNIT_NONE:
        break;
    case SANE_UNIT_PIXEL:
        conCat(&string, " unit=pixels");
        break;
    case SANE_UNIT_BIT:
        conCat(&string, " unit=bits");
        break;
    case SANE_UNIT_MM:
        conCat(&string, " unit=mm");
        break;
    case SANE_UNIT_DPI:
        conCat(&string, " unit=dpi");
        break;
    case SANE_UNIT_PERCENT:
        conCat(&string, " unit=percent");
        break;
    case SANE_UNIT_MICROSECOND:
        conCat(&string, " unit=microseconds");
        break;
    default:
        o_concatf (&string, " unit=%d", option->unit);
        break;
    }

    switch (option->constraint_type) {
    case SANE_CONSTRAINT_RANGE:
        if (option->type == SANE_TYPE_FIXED)
            o_concatf (&string, " min=%f, max=%f, quant=%d",
                                    SANE_UNFIX (option->constraint.range->min), SANE_UNFIX (option->constraint.range->max),
                                    option->constraint.range->quant);
        else
            o_concatf (&string, " min=%d, max=%d, quant=%d",
                                    option->constraint.range->min, option->constraint.range->max,
                                    option->constraint.range->quant);
        break;
    case SANE_CONSTRAINT_WORD_LIST:
        conCat(&string, " values=[");
        for (i = 0; i < option->constraint.word_list[0]; i++) {
            if (i != 0)
                conCat(&string, ", ");
            if (option->type == SANE_TYPE_INT)
                o_concatf (&string, "%d", option->constraint.word_list[i+1]);
            else
                o_concatf (&string, "%f", SANE_UNFIX (option->constraint.word_list[i+1]));
        }
        conCat(&string, "]");
        break;
    case SANE_CONSTRAINT_STRING_LIST:
        conCat(&string, " values=[");
        for (i = 0; option->constraint.string_list[i]; i++) {
            if (i != 0)
                conCat(&string, ", ");
            o_concatf (&string, "\"%s\"", option->constraint.string_list[i]);
        }
        conCat(&string, "]");
        break;
    default:
        break;
    }
    
    cap = option->cap;
    if (cap) {
        struct {
            SANE_Int cap;
            const char *name;
        } caps[] = {
            { SANE_CAP_SOFT_SELECT,     "soft-select"},
            { SANE_CAP_HARD_SELECT,     "hard-select"},
            { SANE_CAP_SOFT_DETECT,     "soft-detect"},
            { SANE_CAP_EMULATED,        "emulated"},
            { SANE_CAP_AUTOMATIC,       "automatic"},
            { SANE_CAP_INACTIVE,        "inactive"},
            { SANE_CAP_ADVANCED,        "advanced"},
            { 0,                        NULL}
        };
        int i, n = 0;
        
        conCat(&string, " cap=");
        for (i = 0; caps[i].cap > 0; i++) {
            if (cap & caps[i].cap) {
                cap &= ~caps[i].cap;
                if (n != 0)
                    conCat(&string, ",");
                conCat(&string, caps[i].name);
                n++;
            }
        }
        /* Unknown capabilities */
        if (cap) {
            if (n != 0)
                conCat(&string, ",");
            o_concatf (&string, "%x", cap);
        }
    }

    o_log(DEBUGM, "%s", string);
    free(string);

//    if (option->desc)
//      o_log(DEBUGM, "  Description: %s", option->desc);
}
示例#22
0
void *backpopulate_phash_inner( void *u) {

  pthread_t thread[MAX_THREADS];
  pthread_attr_t attr;
  int thread_pointer = 0;
  int avail_processors = 1;

  // We may have 16 processing cors, but only use what we need
  avail_processors = get_nprocs() - 1;
  if( avail_processors > MAX_THREADS ) {
    avail_processors = MAX_THREADS;
  }

  // initialise threading
  pthread_attr_init(&attr);
  pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE);

  for( thread_pointer = 0; thread_pointer < MAX_THREADS; thread_pointer++ ) {
    pthread_create( &thread[ thread_pointer], &attr, stub, (void *)NULL );
  }
  thread_pointer = 0;

  // What tasks do we need to do
  struct simpleLinkedList *rSet;
  char *sql = o_strdup("SELECT filetype, docid FROM docs WHERE image_phash = 0");
  rSet = runquery_db(sql, NULL);
  if( rSet != NULL ) {
    do {

      // Queue up the next task
      int docid = atoi( readData_db(rSet, "docid") );
      char *docfilename;
      if( ( 0 == strcmp("2", readData_db(rSet, "filetype") ) ) 
      || ( 0 == strcmp("4", readData_db(rSet, "filetype") ) ) ) {
        docfilename = o_printf("%s/scans/%d_1.jpg", BASE_DIR, docid);
      }
      else {
        docfilename = o_printf("%s/scans/%d_thumb.jpg", BASE_DIR, docid);
      }

      // Wait for an available worker
      while( thread_active[thread_pointer] == 1 ) {
        thread_pointer++;
        if( thread_pointer > avail_processors ) {
          thread_pointer = 0;
        }
        usleep(200);
      }

      // Wait for it to join back first
      pthread_join( thread[ thread_pointer ], NULL);

      // Give instructions to the next worker
      struct process_phash *data = malloc( sizeof( struct process_phash ) );
      data->filename = docfilename;
      data->docid = docid;
      data->thread_id = thread_pointer;
      thread_active[thread_pointer] = 1;
      pthread_create( &thread[ thread_pointer], &attr, process_doc, (void *)data );

    } while ( nextRow( rSet ) );
    free_recordset( rSet );
  }
  free(sql);

  // Wait for everything t ofinish
  for( thread_pointer = 0; thread_pointer < MAX_THREADS; thread_pointer++ ) {
    pthread_join( thread[ thread_pointer ], NULL);
  }

  // Set the config flag, so we don't try this again.
  o_log(INFORMATION, "Marking that the backpopulation of pHash is: complete" );
  sql = o_strdup("UPDATE config SET config_value = 'complete' WHERE config_option = 'backpopulate_phash'");
  runUpdate_db(sql, NULL);
  free(sql);

  return NULL;
}
示例#23
0
文件: scan.c 项目: Rventric/opendias
char *internalDoScanningOperation(char *uuid, char *lang) {

  int request_resolution = 0;
  int docid;
  int current_page = 0;
  int total_requested_pages;
  double totbytes = 0;
  SANE_Status status;
  SANE_Handle *openDeviceHandle;
  SANE_Byte *raw_image;
  SANE_Parameters pars;
  char *docid_s;
  char *total_requested_pages_s;
  char *devName;
  char *outFilename;
  char *raw_image_format;
  char *header;

  o_log(DEBUGM, "doScanningOperation: sane initialized uuid(%s)",(char *)uuid);
  updateScanProgress(uuid, SCAN_WAITING_ON_SCANNER, 0);

  // Open the device
  devName = getScanParam(uuid, SCAN_PARAM_DEVNAME);
  o_log(DEBUGM, "sane_open of \"%s\"",devName);
  status = sane_open ((SANE_String_Const) devName, (SANE_Handle)&openDeviceHandle);
  if(status != SANE_STATUS_GOOD) {
    handleSaneErrors("Cannot open device ", devName, status, 0);
    updateScanProgress(uuid, SCAN_ERRO_FROM_SCANNER, status);
    free(devName);
    return 0;
  }
  free(devName);

  /* ========================================================== */
  if ( ! setOptions( (char *)uuid, openDeviceHandle, &request_resolution ) )
    return 0;
  o_log(DEBUGM, "sane_start: setOptions returned request_resolution %d\n",request_resolution);

  int timeout = 5;
  while( 0 < timeout ) {
    status = sane_start (openDeviceHandle);
    if(status == SANE_STATUS_GOOD) {  
      break;
    }
    else {
      if(status == SANE_STATUS_DEVICE_BUSY ) {  
        // BUSY signal could be the scanner just having a 
        // bit of lag - specially network connected devices
        timeout--;
        if ( timeout == 0 ) {
          handleSaneErrors("Cannot start scanning", "even after trying several time", status, 0);
          updateScanProgress(uuid, SCAN_ERRO_FROM_SCANNER, status);
          return 0;
        }
        else {
          o_log(WARNING, "Device reports not ready to 'start', waiting 500ms. Will try another %d times", timeout);
          usleep(500 * 1000); // 500ms or 0.5sec
        }
      }
      else {
        handleSaneErrors("Cannot start scanning", "", status, 0);
        updateScanProgress(uuid, SCAN_ERRO_FROM_SCANNER, status);
        return 0;
      }
    }
  }

  // Get scanning params (from the scanner)
  if( request_resolution == 0 ) {
    o_log(DEBUGM, "Resolution did not get set in scanner setup.");
    updateScanProgress(uuid, SCAN_INTERNAL_ERROR, 10004);
    return 0;
  }

  o_log(DEBUGM, "Get scanning params");
  status = sane_get_parameters (openDeviceHandle, &pars);
  o_log(INFORMATION, "Scanner Parm : stat=%s form=%d,lf=%d,bpl=%d,pixpl=%d,lin=%d,dep=%d",
    sane_strstatus (status),
    pars.format, pars.last_frame,
    pars.bytes_per_line, pars.pixels_per_line,
    pars.lines, pars.depth);

  switch (pars.format) {
    case SANE_FRAME_GRAY:
      o_log(DEBUGM, "Expecting Gray data (1 channel only).");
      raw_image_format = o_strdup( "P5" );
      break;
    case SANE_FRAME_RGB:
      o_log(DEBUGM, "Expecting RGB data (3 channels).");
      raw_image_format = o_strdup( "P6" );
      break;
    default:
      o_log(DEBUGM, "backend returns three frames speratly. We do not currently support this.");
      updateScanProgress(uuid, SCAN_INTERNAL_ERROR, 10003);
      return 0;
      break;
  }
  
  header = o_printf ("%s\n# SANE data follows\n%d %d\n%d\n", 
    raw_image_format, pars.pixels_per_line, pars.lines,
    (pars.depth <= 8) ? 255 : 65535);
  free( raw_image_format );


  // Save Record
  //
  docid_s = getScanParam(uuid, SCAN_PARAM_DOCID);
  total_requested_pages_s = getScanParam(uuid, SCAN_PARAM_REQUESTED_PAGES);
  total_requested_pages = atoi(total_requested_pages_s);
  free(total_requested_pages_s);
  if( docid_s == NULL ) {
    o_log(DEBUGM, "Saving record");
    updateScanProgress(uuid, SCAN_DB_WORKING, 0);

    docid_s = addNewScannedDoc(pars.lines, pars.pixels_per_line, request_resolution, total_requested_pages); 
    setScanParam(uuid, SCAN_PARAM_DOCID, docid_s);
    setScanParam(uuid, SCAN_PARAM_ON_PAGE, "1");
    current_page = 1;
  }
  else {
    char *current_page_s = getScanParam(uuid, SCAN_PARAM_ON_PAGE);
    current_page = atoi(current_page_s);
    free(current_page_s);

    current_page++;

    current_page_s = itoa(current_page, 10);
    setScanParam(uuid, SCAN_PARAM_ON_PAGE, current_page_s);
    free(current_page_s);
  }
  docid = atoi(docid_s);
  free(docid_s);

  totbytes = (double)((pars.bytes_per_line * pars.lines));

  /* ========================================================== */
  raw_image = collectData( (char *)uuid, openDeviceHandle, totbytes, pars.bytes_per_line, header );
  o_log(INFORMATION, "Scanning done.");

  o_log(DEBUGM, "sane_cancel");
  sane_cancel(openDeviceHandle);

  o_log(DEBUGM, "sane_close");
  sane_close(openDeviceHandle);


  // Convert Raw into JPEG
  //
  updateScanProgress(uuid, SCAN_CONVERTING_FORMAT, 0);
  PIX *pix;
  if ( ( pix = pixReadMem( raw_image, (pars.bytes_per_line*pars.lines)+strlen(header) ) ) == NULL) {
    o_log(ERROR, "Could not load the image data into a PIX");
  }
  updateScanProgress(uuid, SCAN_CONVERTING_FORMAT, 55);
  o_log(INFORMATION, "Convertion process: Loaded (depth: %d)", pixGetDepth(pix));
  free(raw_image);
  free(header);

  outFilename = o_printf("%s/scans/%d_%d.jpg", BASE_DIR, docid, current_page);
  pixWrite(outFilename, pix, IFF_JFIF_JPEG);
  free(outFilename);
  updateScanProgress(uuid, SCAN_CONVERTING_FORMAT, 100);
  o_log(INFORMATION, "Conversion process: Complete");




  // Do OCR - on this page
  // - OCR libs just wants the raw data and not the image header
  ocrImage( uuid, docid, current_page, request_resolution, pix, lang );


#ifdef CAN_PHASH
  // Calulate the pHash, so we can compare images later
  if( current_page == 1 ) {
    updateScanProgress(uuid, SCAN_CALULATING_PHASH, 0);
    unsigned long long hash = getImagePhash_px( pix );
    savePhash( docid, hash );
  }
#endif /* CAN_PHASH */
  pixDestroy( &pix );


  // cleaup && What should we do next
  //
  o_log(DEBUGM, "mostly done.");
  if(current_page >= total_requested_pages)
    updateScanProgress(uuid, SCAN_FINISHED, docid);
  else
    updateScanProgress(uuid, SCAN_WAITING_ON_NEW_PAGE, ++current_page);

  o_log(DEBUGM, "Page scan done.");

  return o_strdup("OK"); 
}
示例#24
0
文件: scan.c 项目: Rventric/opendias
extern char *internalGetScannerList(char *lang) {
  char *answer = NULL;
  SANE_Status status;
  const SANE_Device **SANE_device_list;
  int scanOK = SANE_FALSE;
  char *deviceList; 

  status = sane_get_devices (&SANE_device_list, SANE_TRUE);
  if(status == SANE_STATUS_GOOD) {
    if (SANE_device_list && SANE_device_list[0]) {
      scanOK = SANE_TRUE;
      o_log(DEBUGM, "device(s) found");
    }
    else {
      o_log(INFORMATION, "No devices found");
    }
  }
  else {
    o_log(WARNING, "Checking for devices failed");
  }

  if(scanOK == SANE_TRUE) {

    int i = 0;

    char *replyTemplate; 
    replyTemplate = o_strdup("<Device><vendor>%s</vendor><model>%s</model><type>%s</type><name>%s</name><host>%s</host></Device>");
    deviceList = o_strdup("");

    for (i=0 ; SANE_device_list[i] ; i++) {

      char *vendor, *model, *type, *name;
      char *scannerHost;

      vendor = o_strdup(SANE_device_list[i]->vendor);
      model = o_strdup(SANE_device_list[i]->model);
      type = o_strdup(SANE_device_list[i]->type);
      name = o_strdup(SANE_device_list[i]->name);
      propper(vendor);
      propper(model);
      propper(type);

      // Find location of the device
      if ( name && name == strstr(name, "net:") ) {

        struct sockaddr_in sa;
        char *ipandmore, *ip;
        char host[NI_MAXHOST];
        char service[NI_MAXSERV];
        int len;

        // Ignore the 'net:' part
        ipandmore = name + 4;

        // Find the length of the address part
        len = strstr(ipandmore, ":") - ipandmore;

        // Load 'ip' with the network addres
        ip = malloc(1+(size_t)len);
        (void) strncpy(ip,ipandmore,(size_t)len);
        ip[len] = '\0';

        // Convert into an inet address
        memset(&sa, 0, sizeof(sa));
        sa.sin_family = AF_INET;
        sa.sin_addr.s_addr = inet_addr( ip );

        // Lookup hostname from address
        o_log(DEBUGM, "Going to lookup: %s", ip);
        if ( getnameinfo((struct sockaddr *)&sa, sizeof sa, host, sizeof host, service, sizeof service, NI_NAMEREQD) == 0 ) {
          o_log(DEBUGM, "found host: %s", host);
          scannerHost = o_strdup(host);
        } 
        else {
          o_log(DEBUGM, "Could not get hostname");
          scannerHost = o_strdup(ip);
        }

        // Clean up
        free(ip);
      }
      else {
        scannerHost = o_strdup( getString("LOCAL_opendias_server", lang) );
      }

      // Build Reply
      //
      o_concatf(&deviceList, replyTemplate, vendor, model, type, name, scannerHost);

      free(vendor);
      free(model);
      free(type);
      free(name);
      free(scannerHost);
    }

    free(replyTemplate);
    if(deviceList) {
      // The escaped string placeholder will be interprited in the sane dispatcher client
      answer = o_printf("<?xml version='1.0' encoding='utf-8'?>\n<Response><ScannerList%%s><Devices>%s</Devices></ScannerList></Response>", deviceList);
      free(deviceList);
    }
    else {
      // No devices
      // The escaped string placeholder will be interprited in the sane dispatcher client
      answer = o_strdup( "<?xml version='1.0' encoding='utf-8'?>\n<Response><ScannerList%s></ScannerList></Response>");
    }
  }

  else {
    // sane failed.
    // The escaped string placeholder will be interprited in the sane dispatcher client
    answer = o_strdup( "<?xml version='1.0' encoding='utf-8'?>\n<Response><ScannerList%s></ScannerList></Response>");
  }

  return answer;

}
示例#25
0
文件: scan.c 项目: Rventric/opendias
extern char *internalGetScannerDetails(char *device, char *lang) {

  char *answer = NULL;
  SANE_Status status;
  char *deviceList = o_strdup("");; 
  int hlp = 0, resolution = 300, minRes=50, maxRes=50, phashAvailable=0;
  char *resolution_s, *maxRes_s, *minRes_s;
  SANE_Handle *openDeviceHandle;

  o_log(DEBUGM, "sane_open of \"%s\"", device);
  status = sane_open (device, (SANE_Handle)&openDeviceHandle);
  if(status != SANE_STATUS_GOOD) {
    o_log(ERROR, "Could not open: '%s' with error: %s", device, sane_strstatus(status));
    free(deviceList);
    return NULL;
  }


  //
  // Find resolution ranges
  //
  for (hlp = 0; hlp < 9999; hlp++) {

    const SANE_Option_Descriptor *sod;

    sod = sane_get_option_descriptor (openDeviceHandle, hlp);
    if (sod == NULL)
      break;

    // Just a placeholder
    if (sod->type == SANE_TYPE_GROUP
    || sod->name == NULL
    || hlp == 0)
      continue;

    if ( 0 == strcmp(sod->name, SANE_NAME_SCAN_RESOLUTION) ) {

      // Some kind of sliding range
      if (sod->constraint_type == SANE_CONSTRAINT_RANGE) {
        o_log(DEBUGM, "Resolution setting detected as 'range'");

        // Fixed resolution
        if (sod->type == SANE_TYPE_FIXED)
          maxRes = (int)SANE_UNFIX (sod->constraint.range->max);
        else
          maxRes = sod->constraint.range->max;
      }

      // A fixed list of options
      else if (sod->constraint_type == SANE_CONSTRAINT_WORD_LIST) {
        int lastIndex = sod->constraint.word_list[0];
        o_log(DEBUGM, "Resolution setting detected as 'word list': lastIndex = %d",lastIndex);

        // maxRes = sod->constraint.word_list[lastIndex];
        // resolution list cannot be treated as low to high ordered list 
        // remark: impl capability to select scan resolution in webInterface
        int n=0;
        maxRes = 0;
        for (n=1; n<=lastIndex; n++ ) {
          o_log(DEBUGM, "index results %d --> %d", n ,(int)sod->constraint.word_list[n]);
          if ( maxRes < sod->constraint.word_list[n] ) {
            maxRes=sod->constraint.word_list[n];
          }
        }

      }

      break; // we've found our resolution - no need to search more
    }
  }
  o_log(DEBUGM, "Determined max resultion to be %d", maxRes);


  // Define a default
  if(resolution >= maxRes)
    resolution = maxRes;
  if(resolution <= minRes)
    resolution = minRes;

  o_log(DEBUGM, "sane_cancel");
  sane_cancel(openDeviceHandle);

  o_log(DEBUGM, "sane_close");
  sane_close(openDeviceHandle);



  //
  // What languages can we OCR for?
  //
  char *availableLangs = o_strdup("");
#ifdef CAN_OCR
  struct simpleLinkedList *languages = getOCRAvailableLanguages();
  while (languages != NULL ) {
    if ( checkOCRLanguage( languages->data ) == 0 ) {
      o_concatf(&availableLangs, "<lang>%s</lang>", languages->data);
    }
    languages = sll_getNext(languages);
  }
  sll_destroy( languages );
#endif /* CAN_OCR */


  //
  // Can we give the option of doing 'find simmilar'?
  //
#ifdef CAN_PHASH
  phashAvailable = 1;
#endif /* CAN_PHASH */

  // Build Reply
  //
  resolution_s = itoa(resolution,10);
  maxRes_s = itoa(maxRes,10);
  minRes_s = itoa(minRes,10);

  o_concatf(&deviceList, "<Resolution><max>%s</max><min>%s</min><default>%s</default></Resolution><OCRLanguages>%s</OCRLanguages><phash>%d</phash>", maxRes_s, minRes_s, resolution_s, availableLangs, phashAvailable);

  free(maxRes_s);
  free(minRes_s);
  free(resolution_s);
  free(availableLangs);

  // The escaped string placeholder will be interprited in the sane dispatcher client
  answer = o_printf("<?xml version='1.0' encoding='utf-8'?>\n<Response><ScannerDetails>%s</ScannerDetails></Response>", deviceList);
  free(deviceList);

  return answer;

}
示例#26
0
文件: dbaccess.c 项目: skm42/opendias
extern char *addNewScannedDoc (int getLines, int ppl, int resolution, int pageCount) {
  return addNewDoc(SCAN_FILETYPE, getLines, ppl, resolution, pageCount, o_strdup("") );
}
示例#27
0
/**
 * Initialize the application configuration based on the config file content
 * Read the config file, get mandatory variables and devices
 */
int build_config_from_file(struct config_elements * config) {
  
  config_t cfg;
  config_setting_t * root, * database;
  const char * cur_prefix, * cur_log_mode, * cur_log_level, * cur_log_file = NULL, * one_log_mode, 
             * db_type, * db_sqlite_path, * db_mariadb_host = NULL, * db_mariadb_user = NULL, * db_mariadb_password = NULL, * db_mariadb_dbname = NULL;
  int db_mariadb_port = 0;
  
  config_init(&cfg);
  
  if (!config_read_file(&cfg, config->config_file)) {
    fprintf(stderr, "Error parsing config file %s\nOn line %d error: %s\n", config_error_file(&cfg), config_error_line(&cfg), config_error_text(&cfg));
    config_destroy(&cfg);
    return 0;
  }
  
  if (config->instance->port == -1) {
    // Get Port number to listen to
    int port;
    config_lookup_int(&cfg, "port", &port);
    config->instance->port = port;
  }
  
  if (config->url_prefix == NULL) {
    // Get prefix url
    if (config_lookup_string(&cfg, "url_prefix", &cur_prefix)) {
      config->url_prefix = o_strdup(cur_prefix);
      if (config->url_prefix == NULL) {
        fprintf(stderr, "Error allocating config->url_prefix, exiting\n");
        config_destroy(&cfg);
        return 0;
      }
    }
  }

  if (config->log_mode == Y_LOG_MODE_NONE) {
    // Get log mode
    if (config_lookup_string(&cfg, "log_mode", &cur_log_mode)) {
      one_log_mode = strtok((char *)cur_log_mode, ",");
      while (one_log_mode != NULL) {
        if (0 == strncmp("console", one_log_mode, strlen("console"))) {
          config->log_mode |= Y_LOG_MODE_CONSOLE;
        } else if (0 == strncmp("syslog", one_log_mode, strlen("syslog"))) {
          config->log_mode |= Y_LOG_MODE_SYSLOG;
        } else if (0 == strncmp("file", one_log_mode, strlen("file"))) {
          config->log_mode |= Y_LOG_MODE_FILE;
          // Get log file path
          if (config->log_file == NULL) {
            if (config_lookup_string(&cfg, "log_file", &cur_log_file)) {
              config->log_file = o_strdup(cur_log_file);
              if (config->log_file == NULL) {
                fprintf(stderr, "Error allocating config->log_file, exiting\n");
                config_destroy(&cfg);
                return 0;
              }
            }
          }
        }
        one_log_mode = strtok(NULL, ",");
      }
    }
  }
  
  if (config->log_level == Y_LOG_LEVEL_NONE) {
    // Get log level
    if (config_lookup_string(&cfg, "log_level", &cur_log_level)) {
      if (0 == strncmp("NONE", cur_log_level, strlen("NONE"))) {
        config->log_level = Y_LOG_LEVEL_NONE;
      } else if (0 == strncmp("ERROR", cur_log_level, strlen("ERROR"))) {
        config->log_level = Y_LOG_LEVEL_ERROR;
      } else if (0 == strncmp("WARNING", cur_log_level, strlen("WARNING"))) {
        config->log_level = Y_LOG_LEVEL_WARNING;
      } else if (0 == strncmp("INFO", cur_log_level, strlen("INFO"))) {
        config->log_level = Y_LOG_LEVEL_INFO;
      } else if (0 == strncmp("DEBUG", cur_log_level, strlen("DEBUG"))) {
        config->log_level = Y_LOG_LEVEL_DEBUG;
      }
    }
  }

  if (!y_init_logs(GARETH_LOG_NAME, config->log_mode, config->log_level, config->log_file, "Starting Gareth alert and messenger service")) {
    fprintf(stderr, "Error initializing logs\n");
    exit_server(&config, GARETH_ERROR);
  }
    
  root = config_root_setting(&cfg);
  database = config_setting_get_member(root, "database");
  if (database != NULL) {
    if (config_setting_lookup_string(database, "type", &db_type) == CONFIG_TRUE) {
      if (0 == strncmp(db_type, "sqlite3", strlen("sqlite3"))) {
        if (config_setting_lookup_string(database, "path", &db_sqlite_path) == CONFIG_TRUE) {
          config->conn = h_connect_sqlite(db_sqlite_path);
          if (config->conn == NULL) {
            config_destroy(&cfg);
            fprintf(stderr, "Error opening sqlite database %s\n", db_sqlite_path);
            return 0;
          }
        } else {
          config_destroy(&cfg);
          fprintf(stderr, "Error, no sqlite database specified\n");
          return 0;
        }
      } else if (0 == strncmp(db_type, "mariadb", strlen("mariadb"))) {
        config_setting_lookup_string(database, "host", &db_mariadb_host);
        config_setting_lookup_string(database, "user", &db_mariadb_user);
        config_setting_lookup_string(database, "password", &db_mariadb_password);
        config_setting_lookup_string(database, "dbname", &db_mariadb_dbname);
        config_setting_lookup_int(database, "port", &db_mariadb_port);
        config->conn = h_connect_mariadb(db_mariadb_host, db_mariadb_user, db_mariadb_password, db_mariadb_dbname, db_mariadb_port, NULL);
        if (config->conn == NULL) {
          fprintf(stderr, "Error opening mariadb database %s\n", db_mariadb_dbname);
          config_destroy(&cfg);
          return 0;
        }
      } else {
        config_destroy(&cfg);
        fprintf(stderr, "Error, database type unknown\n");
        return 0;
      }
    } else {
      config_destroy(&cfg);
      fprintf(stderr, "Error, no database type found\n");
      return 0;
    }
  } else {
    config_destroy(&cfg);
    fprintf(stderr, "Error, no database setting found\n");
    return 0;
  }
  
  config_destroy(&cfg);
  return 1;
}
示例#28
0
文件: dbaccess.c 项目: skm42/opendias
extern int addTagToDoc (char *docid, char *tagid) {

  char *sql = o_strdup("INSERT INTO doc_tags (docid, tagid) VALUES (?, ?) ");
  return addRemoveTagOnDocument(sql, docid, tagid);
}
示例#29
0
/**
 * Initialize the application configuration based on the command line parameters
 */
int build_config_from_args(int argc, char ** argv, struct config_elements * config) {
  int next_option;
  const char * short_options = "c::p::b::u::d::a::s::m::l::f::r::h::";
  char * tmp = NULL, * to_free = NULL, * one_log_mode = NULL;
  static const struct option long_options[]= {
    {"config-file", optional_argument,NULL, 'c'},
    {"port", optional_argument,NULL, 'p'},
    {"url-prefix", optional_argument,NULL, 'u'},
    {"log-mode", optional_argument,NULL, 'm'},
    {"log-level", optional_argument,NULL, 'l'},
    {"log-file", optional_argument,NULL, 'f'},
    {"help", optional_argument,NULL, 'h'},
    {NULL, 0, NULL, 0}
  };
  
  if (config != NULL) {
    do {
      next_option = getopt_long(argc, argv, short_options, long_options, NULL);
      
      switch (next_option) {
        case 'c':
          if (optarg != NULL) {
            config->config_file = o_strdup(optarg);
            if (config->config_file == NULL) {
              fprintf(stderr, "Error allocating config->config_file, exiting\n");
              exit_server(&config, GARETH_STOP);
            }
          } else {
            fprintf(stderr, "Error!\nNo config file specified\n");
            return 0;
          }
          break;
        case 'p':
          if (optarg != NULL) {
            config->instance->port = strtol(optarg, NULL, 10);
            if (config->instance->port <= 0 || config->instance->port > 65535) {
              fprintf(stderr, "Error!\nInvalid TCP Port number\n\tPlease specify an integer value between 1 and 65535");
              return 0;
            }
          } else {
            fprintf(stderr, "Error!\nNo TCP Port number specified\n");
            return 0;
          }
          break;
        case 'u':
          if (optarg != NULL) {
            config->url_prefix = o_strdup(optarg);
            if (config->url_prefix == NULL) {
              fprintf(stderr, "Error allocating config->url_prefix, exiting\n");
              exit_server(&config, GARETH_STOP);
            }
          } else {
            fprintf(stderr, "Error!\nNo URL prefix specified\n");
            return 0;
          }
          break;
        case 'm':
          if (optarg != NULL) {
            tmp = o_strdup(optarg);
            if (tmp == NULL) {
              fprintf(stderr, "Error allocating log_mode, exiting\n");
              exit_server(&config, GARETH_STOP);
            }
            one_log_mode = strtok(tmp, ",");
            while (one_log_mode != NULL) {
              if (0 == strncmp("console", one_log_mode, strlen("console"))) {
                config->log_mode |= Y_LOG_MODE_CONSOLE;
              } else if (0 == strncmp("syslog", one_log_mode, strlen("syslog"))) {
                config->log_mode |= Y_LOG_MODE_SYSLOG;
              } else if (0 == strncmp("file", one_log_mode, strlen("file"))) {
                config->log_mode |= Y_LOG_MODE_FILE;
              }
              one_log_mode = strtok(NULL, ",");
            }
            free(to_free);
          } else {
            fprintf(stderr, "Error!\nNo mode specified\n");
            return 0;
          }
          break;
        case 'l':
          if (optarg != NULL) {
            if (0 == strncmp("NONE", optarg, strlen("NONE"))) {
              config->log_level = Y_LOG_LEVEL_NONE;
            } else if (0 == strncmp("ERROR", optarg, strlen("ERROR"))) {
              config->log_level = Y_LOG_LEVEL_ERROR;
            } else if (0 == strncmp("WARNING", optarg, strlen("WARNING"))) {
              config->log_level = Y_LOG_LEVEL_WARNING;
            } else if (0 == strncmp("INFO", optarg, strlen("INFO"))) {
              config->log_level = Y_LOG_LEVEL_INFO;
            } else if (0 == strncmp("DEBUG", optarg, strlen("DEBUG"))) {
              config->log_level = Y_LOG_LEVEL_DEBUG;
            }
          } else {
            fprintf(stderr, "Error!\nNo log level specified\n");
            return 0;
          }
          break;
        case 'f':
          if (optarg != NULL) {
            config->log_file = o_strdup(optarg);
            if (config->log_file == NULL) {
              fprintf(stderr, "Error allocating config->log_file, exiting\n");
              exit_server(&config, GARETH_STOP);
            }
          } else {
            fprintf(stderr, "Error!\nNo log file specified\n");
            return 0;
          }
          break;
        case 'h':
          exit_server(&config, GARETH_STOP);
          break;
      }
      
    } while (next_option != -1);
    
    // If none exists, exit failure
    if (config->config_file == NULL) {
      fprintf(stderr, "No configuration file found, please specify a configuration file path\n");
      return 0;
    }
    
    return 1;
  } else {
    return 0;
  }
  
}
示例#30
0
文件: dbaccess.c 项目: skm42/opendias
extern int removeTagFromDoc (char *docid, char *tagid) {

  char *sql = o_strdup("DELETE FROM doc_tags WHERE docid = ? AND tagid = ? ");
  return addRemoveTagOnDocument(sql, docid, tagid);
}