static int sec_bat_adc_ap_read(void)
{
int data = -1;
int rc = -1;
struct qpnp_vadc_result results;
switch (current_chip_vendor)
{
case VENDOR_LSI :
break;
case VENDOR_QCOM :
#if defined(CONFIG_ARCH_MSM8974PRO)
rc = qpnp_vadc_read(adc_client, LR_MUX5_PU1_AMUX_THM2, &results);
#else
rc = qpnp_vadc_read(NULL, LR_MUX5_PU2_AMUX_THM2, &results);
#endif
if (rc) {
pr_err("%s: Unable to read batt temperature rc=%d\n",
__func__, rc);
return 0;
}
pr_err("%s: adc %d\n",
__func__, results.adc_code);
data = results.adc_code;
break;
default :
break;
}
pr_info("%s: [%d] data = %d\n", __func__, current_chip_vendor, data);
return data;
}
static int sec_bat_adc_ap_read(struct sec_battery_info *battery, int channel)
{
struct qpnp_vadc_result results;
int rc = -1;
int data = -1;
switch (channel)
{
case SEC_BAT_ADC_CHANNEL_TEMP :
rc = qpnp_vadc_read(NULL, temp_channel, &results);
if (rc) {
pr_err("%s: Unable to read batt temperature rc=%d\n",
__func__, rc);
return 0;
}
data = results.adc_code;
break;
case SEC_BAT_ADC_CHANNEL_TEMP_AMBIENT:
data = 33000;
break;
case SEC_BAT_ADC_CHANNEL_BAT_CHECK :
qpnp_vadc_read(NULL, P_MUX8_1_3, &results);
data = ((int)results.physical) / 1000;
break;
default :
break;
}
pr_debug("%s: data(%d)\n", __func__, data);
return data;
}
static int sec_bat_adc_ap_read(struct sec_battery_info *battery, int channel)
{
struct qpnp_vadc_result results;
int rc = -1;
int data = -1;
switch (channel)
{
case SEC_BAT_ADC_CHANNEL_TEMP:
rc = qpnp_vadc_read(adc_client, LR_MUX1_BATT_THERM, &results);
if (rc) {
pr_err("%s: Unable to read batt temperature rc=%d\n",
__func__, rc);
return 0;
}
data = results.adc_code;
break;
case SEC_BAT_ADC_CHANNEL_TEMP_AMBIENT:
data = 33000;
break;
case SEC_BAT_ADC_CHANNEL_BAT_CHECK:
rc = qpnp_vadc_read(adc_client, LR_MUX2_BAT_ID, &results);
if (rc) {
pr_err("%s: Unable to read BATT_ID ADC rc=%d\n",
__func__, rc);
return 0;
}
pr_debug("BAT_ID physical= %lld, raw = 0x%x\n", results.physical, results.adc_code);
data = results.physical;
break;
case SEC_BAT_ADC_CHANNEL_INBAT_VOLTAGE:
rc = qpnp_vadc_read(adc_client, VBAT_SNS, &results);
if (rc) {
pr_err("%s: Unable to read VBAT_SNS ADC rc=%d\n",
__func__, rc);
return 0;
}
data = ((int)results.physical)/1000;
break;
case SEC_BAT_ADC_CHANNEL_DISCHARGING_CHECK:
/** Battery Thermister ADC is used for self_discharge IC ADC in GT5*/
rc = qpnp_vadc_read(adc_client, LR_MUX1_BATT_THERM, &results);
if (rc) {
pr_err("%s: Unable to read discharging_check ADC rc=%d\n",
__func__, rc);
return 0;
}
data = results.adc_code;
break;
case SEC_BAT_ADC_CHANNEL_DISCHARGING_NTC:
return 0;
break;
default :
break;
}
return data;
}
void sec_bat_check_batt_id(struct sec_battery_info *battery)
{
#if defined(CONFIG_SENSORS_QPNP_ADC_VOLTAGE)
#if defined(CONFIG_FUELGAUGE_MAX17050)
int rc, data = -1;
struct qpnp_vadc_result results;
#if defined(CONFIG_MACH_PICASSO) || defined(CONFIG_MACH_LT03) || defined(CONFIG_MACH_VIENNA)
rc = qpnp_vadc_read(NULL, LR_MUX9_PU2_AMUX_THM5, &results);
#else
rc = qpnp_vadc_read(NULL, LR_MUX5_PU2_AMUX_THM2, &results);
#endif
if (rc) {
pr_err("%s: Unable to read batt id rc=%d\n",
__func__, rc);
return;
}
data = results.adc_code;
pr_info("%s: batt_id_adc = (%d)\n", __func__, data);
#if defined(CONFIG_MACH_PICASSO) || defined(CONFIG_MACH_LT03)
/* SDI: 28000, BYD: 29000, ATL: 31000 */
if (data > 31000) { /* ATL */
battery->pdata->vendor = "ATL ATL";
samsung_battery_data[0].Capacity = 0x4074;
samsung_battery_data[0].type_str = "ATL";
} else if (data > 29000) { /* BYD */
battery->pdata->vendor = "BYD BYD";
samsung_battery_data[0].Capacity = 0x4010;
samsung_battery_data[0].type_str = "BYD";
}
#else
/* SDI: 28500, ATL: 31000 */
if (data > 31000) {
battery->pdata->vendor = "ATL ATL";
#if defined(CONFIG_MACH_MONDRIAN)
samsung_battery_data[0].Capacity = 0x2614; /* Mondrian : 4874mAh */
#else
samsung_battery_data[0].Capacity = 0x4958; /* Vienna */
#endif
samsung_battery_data[0].type_str = "ATL";
}
#endif
pr_err("%s: batt_type(%s), batt_id(%d), cap(0x%x), type(%s)\n",
__func__, battery->pdata->vendor, data,
samsung_battery_data[0].Capacity, samsung_battery_data[0].type_str);
#endif
#endif
}
static int sec_bat_adc_ap_read(unsigned int channel)
{
#if defined(CONFIG_SENSORS_QPNP_ADC_VOLTAGE)
int rc = -1, data = -1;
struct qpnp_vadc_result results;
switch (channel) {
case SEC_BAT_ADC_CHANNEL_TEMP:
rc = qpnp_vadc_read(LR_MUX5_PU2_AMUX_THM2, &results);
if (rc) {
pr_err("%s: Unable to read batt temperature rc=%d\n",
__func__, rc);
return 0;
}
data = results.adc_code;
break;
case SEC_BAT_ADC_CHANNEL_TEMP_AMBIENT:
data = 33000;
break;
case SEC_BAT_ADC_CHANNEL_BAT_CHECK:
break;
default:
break;
}
return data;
#else
return 33000;
#endif
}
static int32_t qpnp_check_pmic_temp(void)
{
struct qpnp_iadc_drv *iadc = qpnp_iadc;
struct qpnp_vadc_result result_pmic_therm;
int64_t die_temp_offset;
int rc = 0;
rc = qpnp_vadc_read(DIE_TEMP, &result_pmic_therm);
if (rc < 0)
return rc;
die_temp_offset = result_pmic_therm.physical -
iadc->die_temp;
if (die_temp_offset < 0)
die_temp_offset = -die_temp_offset;
if (die_temp_offset > QPNP_IADC_DIE_TEMP_CALIB_OFFSET) {
iadc->die_temp =
result_pmic_therm.physical;
rc = qpnp_iadc_calibrate_for_trim();
if (rc)
pr_err("periodic IADC calibration failed\n");
}
return rc;
}
static int32_t qpnp_check_pmic_temp(struct qpnp_iadc_chip *iadc)
{
struct qpnp_vadc_result result_pmic_therm;
int64_t die_temp_offset;
int rc = 0;
rc = qpnp_vadc_read(iadc->vadc_dev, DIE_TEMP, &result_pmic_therm);
if (rc < 0)
return rc;
die_temp_offset = result_pmic_therm.physical -
iadc->die_temp;
if (die_temp_offset < 0)
die_temp_offset = -die_temp_offset;
if (die_temp_offset > QPNP_IADC_DIE_TEMP_CALIB_OFFSET) {
iadc->die_temp = result_pmic_therm.physical;
if (!iadc->skip_auto_calibrations) {
rc = qpnp_iadc_calibrate_for_trim(iadc, true);
if (rc)
pr_err("IADC calibration failed rc = %d\n", rc);
}
}
return rc;
}
static void button_pressed(struct work_struct *work)
{
struct delayed_work *dwork = container_of(work, struct delayed_work, work);
struct hsd_info *hi = container_of(dwork, struct hsd_info, work_for_key_pressed);
struct qpnp_vadc_result result;
int acc_read_value = 0;
int i, rc;
struct ear_3button_info_table *table;
int table_size = ARRAY_SIZE(max1462x_ear_3button_type_data);
if (hi->gpio_get_value_func(hi->gpio_detect) || (atomic_read(&hi->is_3_pole_or_not))) {
HSD_ERR("button_pressed but 4 pole ear jack is plugged out already! just ignore the event.\n");
return;
}
rc = qpnp_vadc_read(switch_vadc, P_MUX6_1_1, &result);
if (rc < 0) {
if (rc == -ETIMEDOUT) {
pr_err("[DEBUG] button_pressed : adc read timeout \n");
} else {
pr_err("button_pressed: adc read error - %d\n", rc);
}
}
acc_read_value = (int)result.physical;
pr_info("%s: acc_read_value - %d\n", __func__, acc_read_value);
for (i = 0; i < table_size; i++) {
table = &max1462x_ear_3button_type_data[i];
/*
*/
if ((acc_read_value <= table->PERMISS_REANGE_MAX) &&
(acc_read_value >= table->PERMISS_REANGE_MIN)) {
HSD_DBG("button_pressed \n");
atomic_set(&hi->btn_state, 1);
switch (table->ADC_HEADSET_BUTTON) {
case KEY_MEDIA:
input_report_key(hi->input, KEY_MEDIA, 1);
pr_info("%s: KEY_MEDIA \n", __func__);
break;
case KEY_VOLUMEUP:
input_report_key(hi->input, KEY_VOLUMEUP, 1);
pr_info("%s: KEY_VOLUMEUP \n", __func__);
break;
case KEY_VOLUMEDOWN:
input_report_key(hi->input, KEY_VOLUMEDOWN, 1);
pr_info("%s: KEY_VOLUMDOWN \n", __func__);
break;
default:
break;
}
table->PRESS_OR_NOT = 1;
input_sync(hi->input);
break;
}
}
return;
}
static int sec_bat_adc_ap_read(struct sec_battery_info *battery, int channel)
{
struct qpnp_vadc_result results;
int rc = -1;
int data = -1;
switch (channel)
{
case SEC_BAT_ADC_CHANNEL_TEMP :
rc = qpnp_vadc_read(NULL, temp_channel, &results);
if (rc) {
pr_err("%s: Unable to read batt temperature rc=%d\n",
__func__, rc);
return 0;
}
data = results.adc_code;
break;
case SEC_BAT_ADC_CHANNEL_TEMP_AMBIENT:
data = 33000;
break;
case SEC_BAT_ADC_CHANNEL_BAT_CHECK:
rc = qpnp_vadc_read(NULL, LR_MUX2_BAT_ID, &results);
if (rc) {
pr_err("%s: Unable to read BATT_ID ADC rc=%d\n",
__func__, rc);
return 0;
}
pr_debug("BAT_ID physical= %lld, raw = 0x%x\n", results.physical, results.adc_code);
data = results.physical;
break;
case SEC_BAT_ADC_CHANNEL_INBAT_VOLTAGE:
rc = qpnp_vadc_read(NULL, VBAT_SNS, &results);
if (rc) {
pr_err("%s: Unable to read VBAT_SNS ADC rc=%d\n",
__func__, rc);
return 0;
}
data = ((int)results.physical)/1000;
break;
default :
break;
}
return data;
}
static int bq24192_get_prop_input_voltage(struct bq24192_chip *chip)
{
int rc = 0;
struct qpnp_vadc_result results;
rc = qpnp_vadc_read(USBIN, &results);
if (rc) {
pr_err("Unable to read vbus rc=%d\n", rc);
return UNINIT_VBUS_UV;
}
return (int)results.physical;
}
static int qpnp_tm_update_temp(struct qpnp_tm_chip *chip)
{
struct qpnp_vadc_result adc_result;
int rc;
rc = qpnp_vadc_read(chip->adc_channel, &adc_result);
if (!rc)
chip->temperature = adc_result.physical;
else
dev_err(&chip->spmi_dev->dev, "%s: qpnp_vadc_read(%d) failed, rc=%d\n",
__func__, chip->adc_channel, rc);
return rc;
}
static int get_cp_thm2_value(struct ssp_data *data)
{
int err = 0;
struct qpnp_vadc_result results;
mutex_lock(&data->cp_temp_adc_lock);
err = qpnp_vadc_read(ssp_vadc, LR_MUX8_PU1_AMUX_THM4, &results);
mutex_unlock(&data->cp_temp_adc_lock);
if (err) {
pr_err("%s : error reading chn %d, rc = %d\n",
__func__, LR_MUX8_PU2_AMUX_THM4, err);
return err;
}
return results.adc_code;
}
static int convert_adc_to_temp2(struct ssp_data *data, unsigned int adc)
{
int err = 0;
struct qpnp_vadc_result results;
mutex_lock(&data->cp_temp_adc_lock);
err = qpnp_vadc_read(ssp_vadc, LR_MUX8_PU1_AMUX_THM4, &results);
mutex_unlock(&data->cp_temp_adc_lock);
if (err) {
pr_err("%s : error reading chn %d, rc = %d\n",
__func__, LR_MUX8_PU2_AMUX_THM4, err);
return err;
}
return results.physical * 10;
}
//ASUS_BSP Eason A90_EVB porting ---
int64_t read_battery_id(void)
{
int rc=-1;
struct qpnp_vadc_result result;
rc = qpnp_vadc_read(asus_vadc, LR_MUX2_BAT_ID, &result);
if (rc) {
printk("[BAT][GAU][A66]error reading batt id channel = %d, rc = %d\n",
LR_MUX2_BAT_ID, rc);
return rc;
}
g_BatteryID_value = result.physical;
return result.physical;
}
void sec_bat_check_batt_id(struct sec_battery_info *battery)
{
#if defined(CONFIG_SENSORS_QPNP_ADC_VOLTAGE)
int rc, data = -1;
struct qpnp_vadc_result results;
rc = qpnp_vadc_read(NULL, LR_MUX2_BAT_ID, &results);
if (rc) {
pr_err("%s: Unable to read batt id rc=%d\n",
__func__, rc);
return;
}
data = results.adc_code;
pr_info("%s: batt_id_adc = (%d)\n", __func__, data);
#endif
}
static int sec_therm_get_adc_data(struct sec_therm_info *info)
{
int rc = 0;
int adc_max = 0;
int adc_min = 0;
int adc_total = 0;
int i, adc_data;
struct qpnp_vadc_result results;
for (i = 0; i < ADC_SAMPLING_CNT; i++) {
rc = qpnp_vadc_read(NULL, MSM_THERM_CH , &results);
if (rc) {
pr_err("error reading AMUX %d, rc = %d\n",
MSM_THERM_CH, rc);
goto err;
}
adc_data = results.adc_code;
if (i == 0) {
pr_debug("reading MSM_THERM_CH [rc = %d] [adc_code = %d]\n",
rc,results.adc_code);
}
if (i != 0) {
if (adc_data > adc_max)
adc_max = adc_data;
else if (adc_data < adc_min)
adc_min = adc_data;
} else {
adc_max = adc_data;
adc_min = adc_data;
}
adc_total += adc_data;
}
return (adc_total - adc_max - adc_min) / (ADC_SAMPLING_CNT - 2);
err:
return rc;
}
static int64_t htc_8974_get_usbid_adc(void)
{
#if 0
struct qpnp_vadc_result result;
int err = 0, adc = 0;
err = qpnp_vadc_read(LR_MUX10_USB_ID_LV, &result);
if (err < 0) {
pr_info("[CABLE] %s: get adc fail, err %d\n", __func__, err);
return err;
}
adc = result.physical;
adc /= 1000;
pr_info("[CABLE] chan=%d, adc_code=%d, measurement=%lld, \
physical=%lld translate voltage %d\n", result.chan, result.adc_code,
result.measurement, result.physical, adc);
return adc;
#endif
return htc_qpnp_adc_get_usbid_adc();
}
static int sec_therm_get_adc_data_flash_led(struct sec_therm_info *info)
{
int rc = 0;
int adc_max = 0;
int adc_min = 0;
int adc_total = 0;
int i, adc_data;
struct qpnp_vadc_result results;
for (i = 0; i < ADC_SAMPLING_CNT; i++) {
rc = qpnp_vadc_read(NULL, LR_MUX9_PU2_AMUX_THM5, &results);
if (rc) {
pr_err("error reading AMUX %d, rc = %d\n",
LR_MUX9_PU2_AMUX_THM5, rc);
goto err;
}
adc_data = results.adc_code;
pr_err("reading LR_MUX9_PU2_AMUX_THM5 [rc = %d] [adc_code = %d]\n",
rc,results.adc_code);
if (i != 0) {
if (adc_data > adc_max)
adc_max = adc_data;
else if (adc_data < adc_min)
adc_min = adc_data;
} else {
adc_max = adc_data;
adc_min = adc_data;
}
adc_total += adc_data;
}
return (adc_total - adc_max - adc_min) / (ADC_SAMPLING_CNT - 2);
err:
return rc;
}
static int max14688_read_mic_impedence (struct device *dev)
{
struct qpnp_vadc_result result;
int acc_read_value = 0;
int rc;
rc = qpnp_vadc_read(input_vadc, P_MUX2_1_1, &result);
if (rc < 0) {
if (rc == -ETIMEDOUT) {
pr_err("[DEBUG] button_pressed : adc read timeout \n");
} else {
pr_err("button_pressed: adc read error - %d\n", rc);
}
}
acc_read_value = (int)result.physical;
log_dbg("%s[adc value = %d]\n", __func__, acc_read_value);
return acc_read_value;
}
static int qpnp_get_battery_temp(int *temp)
{
int ret = 0;
struct qpnp_vadc_result results;
if (qpnp_vadc_is_ready()) {
*temp = DEFAULT_TEMP;
return 0;
}
ret = qpnp_vadc_read(LR_MUX1_BATT_THERM, &results);
if (ret) {
pr_err("%s: Unable to read batt temp\n", __func__);
*temp = DEFAULT_TEMP;
return ret;
}
*temp = (int)results.physical;
return 0;
}
int32_t qpnp_check_pmic_temp(void)
{
struct qpnp_iadc_drv *iadc = qpnp_iadc;
struct qpnp_vadc_result result_pmic_therm;
int rc;
rc = qpnp_vadc_read(DIE_TEMP, &result_pmic_therm);
if (rc < 0)
return rc;
if (((uint64_t) (result_pmic_therm.physical -
iadc->die_temp_calib_offset))
> QPNP_IADC_DIE_TEMP_CALIB_OFFSET) {
mutex_lock(&iadc->adc->adc_lock);
rc = qpnp_iadc_calibrate_for_trim();
if (rc)
pr_err("periodic IADC calibration failed\n");
mutex_unlock(&iadc->adc->adc_lock);
}
return 0;
}
lcd_maker_id get_panel_maker_id(void)
{
struct qpnp_vadc_result result;
lcd_maker_id maker_id = LCD_MAKER_MAX;
int rc;
int acc_read_value = 0;
rc = qpnp_vadc_read(P_MUX5_1_1, &result);
if (rc < 0) {
if (rc == -ETIMEDOUT) {
acc_read_value = 0;
}
pr_err("%s : adc read "
"error - %d\n", __func__, rc);
}
acc_read_value = (int)result.physical / 1000;
pr_debug("%s: acc_read_value - %d\n", __func__,
(int)result.physical);
maker_id = get_lcd_maker_by_voltage(acc_read_value);
return maker_id;
}
/* callback for battery check
* return : bool
* true - battery detected, false battery NOT detected
*/
bool sec_bat_check_callback(struct sec_battery_info *battery)
{
struct power_supply *psy;
union power_supply_propval value;
pr_info("%s: battery->pdata->bat_irq_gpio(%d)\n",
__func__, battery->pdata->bat_irq_gpio);
psy = get_power_supply_by_name(("sec-charger"));
if (!psy) {
pr_err("%s: Fail to get psy (%s)\n",
__func__, "sec-charger");
value.intval = 1;
} else {
if (battery->pdata->bat_irq_gpio > 0) {
value.intval = !gpio_get_value(battery->pdata->bat_irq_gpio);
pr_info("%s: Battery status(%d)\n",
__func__, value.intval);
if (value.intval == 0) {
return value.intval;
}
#if defined(CONFIG_MACH_HLTEATT) || defined(CONFIG_MACH_HLTESPR) || \
defined(CONFIG_MACH_HLTEVZW) || defined(CONFIG_MACH_HLTETMO) || \
defined(CONFIG_MACH_HLTEUSC)
{
int data, ret;
struct qpnp_vadc_result result;
struct qpnp_pin_cfg adc_param = {
.mode = 4,
.ain_route = 3,
.src_sel = 0,
.master_en =1,
};
struct qpnp_pin_cfg int_param = {
.mode = 0,
.vin_sel = 2,
.src_sel = 0,
.master_en =1,
};
ret = qpnp_pin_config(battery->pdata->bat_irq_gpio, &adc_param);
if (ret < 0)
pr_info("%s: qpnp config error: %d\n",
__func__, ret);
/* check the adc from vf pin */
qpnp_vadc_read(NULL, P_MUX8_1_3, &result);
data = ((int)result.physical) / 1000;
pr_info("%s: (%dmV) is connected.\n",
__func__, data);
if(data < SHORT_BATTERY_STANDARD) {
pr_info("%s: Short Battery(%dmV) is connected.\n",
__func__, data);
value.intval = 0;
}
ret = qpnp_pin_config(battery->pdata->bat_irq_gpio, &int_param);
if (ret < 0)
pr_info("%s: qpnp config error int: %d\n",
__func__, ret);
}
#endif
} else {
int ret;
ret = psy->get_property(psy, POWER_SUPPLY_PROP_PRESENT, &(value));
if (ret < 0) {
pr_err("%s: Fail to sec-charger get_property (%d=>%d)\n",
__func__, POWER_SUPPLY_PROP_PRESENT, ret);
value.intval = 1;
}
}
}
return value.intval;
}
static int max1462x_hsd_probe(struct platform_device *pdev)
{
struct max1462x_platform_data *pdata = pdev->dev.platform_data;
struct max1462x_hsd_info *hi;
struct qpnp_vadc_result result;
int acc_read_value = 0;
int i;
int adc_read_count = 3;
int ret = 0;
pr_debug("%s\n", __func__);
if (pdev->dev.of_node) {
pdata = devm_kzalloc(&pdev->dev,
sizeof(struct max1462x_platform_data),
GFP_KERNEL);
if (!pdata) {
pr_err("%s: Failed to allocate memory\n", __func__);
return -ENOMEM;
}
pdev->dev.platform_data = pdata;
max1462x_parse_dt(&pdev->dev, pdata);
} else {
pdata = pdev->dev.platform_data;
if (!pdata) {
pr_err("%s: No pdata\n", __func__);
return -ENODEV;
}
}
local_max1462x_workqueue = create_workqueue("max1462x");
if (!local_max1462x_workqueue) {
pr_err("%s: Failed to create_workqueue\n", __func__);
return -ENOMEM;
}
wake_lock_init(&ear_hook_wake_lock, WAKE_LOCK_SUSPEND, "ear_hook");
hi = kzalloc(sizeof(struct max1462x_hsd_info), GFP_KERNEL);
if (!hi) {
pr_err("%s: Failed to allloate memory for device info\n",
__func__);
ret = -ENOMEM;
goto err_kzalloc;
}
hi->key_code = pdata->key_code;
platform_set_drvdata(pdev, hi);
atomic_set(&hi->btn_state, 0);
atomic_set(&hi->is_3_pole_or_not, 1);
hi->gpio_mic_en = pdata->gpio_mic_en;
hi->gpio_detect = pdata->gpio_detect;
hi->gpio_key = pdata->gpio_key;
hi->latency_for_key = msecs_to_jiffies(50); /* convert ms to jiffies */
mutex_init(&hi->mutex_lock);
INIT_WORK(&hi->work, max1462x_detect_work);
INIT_DELAYED_WORK(&hi->work_for_key_pressed, max1462x_button_pressed);
INIT_DELAYED_WORK(&hi->work_for_key_released, max1462x_button_released);
/* init gpio_mic_en & set default value */
ret = gpio_request_one(hi->gpio_mic_en, GPIOF_OUT_INIT_HIGH,
"gpio_mic_en");
if (ret < 0) {
pr_err("%s: Failed to configure gpio%d(gpio_mic_en)n",
__func__, hi->gpio_mic_en);
goto err_gpio_mic_en;
}
pr_debug("gpio_get_value_cansleep(hi->gpio_mic_en)=%d\n",
gpio_get_value_cansleep(hi->gpio_mic_en));
/* init gpio_detect */
ret = gpio_request_one(hi->gpio_detect, GPIOF_IN, "gpio_detect");
if (ret < 0) {
pr_err("%s: Failed to configure gpio%d(gpio_det)\n",
__func__, hi->gpio_detect);
goto err_gpio_detect;
}
/* init gpio_key */
ret = gpio_request_one(hi->gpio_key, GPIOF_IN, "gpio_key");
if (ret < 0) {
pr_err("%s: Failed to configure gpio%d(gpio_key)\n",
__func__, hi->gpio_key);
goto err_gpio_key;
}
ret = gpio_to_irq(hi->gpio_detect);
if (ret < 0) {
pr_err("%s: Failed to get interrupt number\n", __func__);
goto err_irq_detect;
}
hi->irq_detect = ret;
pr_debug("%s: hi->irq_detect = %d\n", __func__, hi->irq_detect);
ret = request_threaded_irq(hi->irq_detect, NULL,
max1462x_earjack_det_irq_handler,
IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING,
pdev->name, hi);
if (ret < 0) {
pr_err("%s: failed to request button irq\n", __func__);
goto err_irq_detect_request;
}
ret = enable_irq_wake(hi->irq_detect);
if (ret < 0) {
pr_err("%s: Failed to set gpio_detect interrupt wake\n",
__func__);
goto err_irq_detect_wake;
}
/* initialize irq of gpio_key */
ret = gpio_to_irq(hi->gpio_key);
if (ret < 0) {
pr_err("%s: Failed to get interrupt number\n", __func__);
goto err_irq_key;
}
hi->irq_key = ret;
pr_debug("%s: hi->irq_key = %d\n", __func__, hi->irq_key);
ret = request_threaded_irq(hi->irq_key, NULL,
max1462x_button_irq_handler,
IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING,
pdev->name, hi);
if (ret < 0) {
pr_err("%s: failed to request button irq\n", __func__);
goto err_irq_key_request;
}
disable_irq(hi->irq_key);
atomic_set(&hi->irq_key_enabled, false);
/* initialize switch device */
hi->sdev.name = pdata->switch_name;
hi->sdev.print_state = max1462x_hsd_print_state;
hi->sdev.print_name = max1462x_hsd_print_name;
ret = switch_dev_register(&hi->sdev);
if (ret < 0) {
pr_err("%s: Failed to register switch device\n", __func__);
goto err_switch_dev_register;
}
/* initialize input device */
hi->input = input_allocate_device();
if (!hi->input) {
pr_err("%s: Failed to allocate input device\n", __func__);
ret = -ENOMEM;
goto err_input_allocate_device;
}
hi->input->name = pdata->keypad_name;
hi->input->id.vendor = 0x0001;
hi->input->id.product = 1;
hi->input->id.version = 1;
/* headset tx noise */
for (i = 0; i < adc_read_count; i++) {
ret = qpnp_vadc_read(ADC_PORT_NUM, &result);
if (ret < 0) {
if (ret == -ETIMEDOUT)
pr_warn("%s: warning: adc read timeout \n",
__func__);
else
pr_warn("%s: warning: adc read error - %d\n",
__func__, ret);
} else {
acc_read_value = (int)result.physical;
pr_info("%s: acc_read_value - %d\n", __func__,
acc_read_value);
break;
}
}
set_bit(EV_SYN, hi->input->evbit);
set_bit(EV_KEY, hi->input->evbit);
set_bit(EV_SW, hi->input->evbit);
set_bit(hi->key_code, hi->input->keybit);
set_bit(SW_HEADPHONE_INSERT, hi->input->swbit);
set_bit(SW_MICROPHONE_INSERT, hi->input->swbit);
input_set_capability(hi->input, EV_KEY, KEY_MEDIA);
input_set_capability(hi->input, EV_KEY, KEY_VOLUMEUP);
input_set_capability(hi->input, EV_KEY, KEY_VOLUMEDOWN);
input_set_capability(hi->input, EV_SW, SW_HEADPHONE_INSERT);
input_set_capability(hi->input, EV_SW, SW_MICROPHONE_INSERT);
ret = input_register_device(hi->input);
if (ret < 0) {
pr_err("%s: Failed to register input device\n", __func__);
goto err_input_register_device;
}
/* to detect in initialization with eacjack insertion */
if (!(gpio_get_value(hi->gpio_detect)))
queue_work(local_max1462x_workqueue, &(hi->work));
return ret;
err_input_register_device:
input_free_device(hi->input);
err_input_allocate_device:
switch_dev_unregister(&hi->sdev);
err_switch_dev_register:
free_irq(hi->irq_key, hi);
err_irq_key_request:
err_irq_key:
err_irq_detect_wake:
free_irq(hi->irq_detect, hi);
err_irq_detect_request:
err_irq_detect:
gpio_free(hi->gpio_key);
err_gpio_key:
gpio_free(hi->gpio_detect);
err_gpio_detect:
gpio_free(hi->gpio_mic_en);
err_gpio_mic_en:
mutex_destroy(&hi->mutex_lock);
kfree(hi);
err_kzalloc:
destroy_workqueue(local_max1462x_workqueue);
local_max1462x_workqueue = NULL;
return ret;
}
static int lge_hsd_probe(struct platform_device *pdev)
{
int ret = 0;
struct max1462x_platform_data *pdata = pdev->dev.platform_data;
struct hsd_info *hi;
HSD_DBG("lge_hsd_probe\n");
hi = kzalloc(sizeof(struct hsd_info), GFP_KERNEL);
if ( hi == NULL) {
HSD_ERR("Failed to allloate headset per device info\n");
return -ENOMEM;
}
if(pdev->dev.of_node){
pdata = devm_kzalloc(&pdev->dev,sizeof(struct max1462x_platform_data),GFP_KERNEL);
if(!pdata){
HSD_ERR("Failed to allocate memory\n");
return -ENOMEM;
}
pdev->dev.platform_data = pdata;
max1462x_parse_dt(&pdev->dev,pdata);
} else {
pdata = devm_kzalloc(&pdev->dev,sizeof(struct max1462x_platform_data),GFP_KERNEL);
if(!pdata){
HSD_ERR("Failed to allocate memory\n");
return -ENOMEM;
}
else
pdata = pdev->dev.platform_data;
}
hi->key_code = pdata->key_code;
platform_set_drvdata(pdev, hi);
atomic_set(&hi->btn_state, 0);
atomic_set(&hi->is_3_pole_or_not, 1);
atomic_set(&hi->irq_key_enabled, FALSE);
hi->gpio_mic_en = pdata->gpio_mic_en;
hi->gpio_detect = pdata->gpio_detect;
hi->gpio_key = pdata->gpio_key;
hi->gpio_set_value_func = pdata->gpio_set_value_func;
hi->gpio_get_value_func = pdata->gpio_get_value_func;
hi->latency_for_key = msecs_to_jiffies(50); /* convert milli to jiffies */
mutex_init(&hi->mutex_lock);
INIT_WORK(&hi->work, detect_work);
INIT_DELAYED_WORK(&hi->work_for_key_pressed, button_pressed);
INIT_DELAYED_WORK(&hi->work_for_key_released, button_released);
ret = gpio_request(hi->gpio_mic_en, "gpio_mic_en");
if (ret < 0) {
HSD_ERR("Failed to configure gpio%d (gpio_mic_en) gpio_request\n", hi->gpio_mic_en);
goto error_02;
}
ret = gpio_direction_output(hi->gpio_mic_en, 0);
if (ret < 0) {
HSD_ERR("Failed to configure gpio%d (gpio_mic_en) gpio_direction_input\n", hi->gpio_mic_en);
goto error_02;
}
HSD_DBG("gpio_get_value_cansleep(hi->gpio_mic_en) = %d\n", gpio_get_value_cansleep(hi->gpio_mic_en));
/* init gpio_detect */
ret = gpio_request(hi->gpio_detect, "gpio_detect");
if (ret < 0) {
HSD_ERR("Failed to configure gpio%d (gpio_det) gpio_request\n", hi->gpio_detect);
goto error_03;
}
ret = gpio_direction_input(hi->gpio_detect);
if (ret < 0) {
HSD_ERR("Failed to configure gpio%d (gpio_det) gpio_direction_input\n", hi->gpio_detect);
goto error_03;
}
/*init gpio_key */
ret = gpio_request(hi->gpio_key, "gpio_key");
if (ret < 0) {
HSD_ERR("Failed to configure gpio%d (gpio_key) gpio_request\n", hi->gpio_key);
goto error_04;
}
ret = gpio_direction_input(hi->gpio_key);
if (ret < 0) {
HSD_ERR("Failed to configure gpio%d (gpio_key) gpio_direction_input\n", hi->gpio_key);
goto error_04;
}
/* initialize irq of gpio_key */
hi->irq_key = gpio_to_irq(hi->gpio_key);
HSD_DBG("hi->irq_key = %d\n", hi->irq_key);
if (hi->irq_key < 0) {
HSD_ERR("Failed to get interrupt number\n");
ret = hi->irq_key;
goto error_06;
}
ret = request_threaded_irq(hi->irq_key, NULL, button_irq_handler,
IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, pdev->name, hi);
if (ret) {
HSD_ERR("failed to request button irq\n");
goto error_06;
}
ret = irq_set_irq_wake(hi->irq_key, 1);
if (ret < 0) {
HSD_ERR("Failed to set irq_key interrupt wake\n");
goto error_06;
}
enable_irq(hi->irq_key);
hi->irq_detect = gpio_to_irq(hi->gpio_detect);
HSD_DBG("hi->irq_detect = %d\n", hi->irq_detect);
if (hi->irq_detect < 0) {
HSD_ERR("Failed to get interrupt number\n");
ret = hi->irq_detect;
goto error_07;
}
ret = request_threaded_irq(hi->irq_detect, NULL, earjack_det_irq_handler,
IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, pdev->name, hi);
if (ret) {
HSD_ERR("failed to request button irq\n");
goto error_07;
}
ret = irq_set_irq_wake(hi->irq_detect, 1);
if (ret < 0) {
HSD_ERR("Failed to set gpio_detect interrupt wake\n");
goto error_07;
}
/* initialize switch device */
hi->sdev.name = pdata->switch_name;
hi->sdev.print_state = lge_hsd_print_state;
hi->sdev.print_name = lge_hsd_print_name;
ret = switch_dev_register(&hi->sdev);
if (ret < 0) {
HSD_ERR("Failed to register switch device\n");
goto error_08;
}
/* initialize input device */
hi->input = input_allocate_device();
if (!hi->input) {
HSD_ERR("Failed to allocate input device\n");
ret = -ENOMEM;
goto error_09;
}
hi->input->name = pdata->keypad_name;
hi->input->id.vendor = 0x0001;
hi->input->id.product = 1;
hi->input->id.version = 1;
/* headset tx noise */
{
struct qpnp_vadc_result result;
int acc_read_value = 0;
int i, rc;
int count = 3;
for (i = 0; i < count; i++)
{
rc = qpnp_vadc_read(P_MUX6_1_1,&result);
if (rc < 0)
{
if (rc == -ETIMEDOUT) {
pr_err("[DEBUG]adc read timeout \n");
} else {
pr_err("[DEBUG]adc read error - %d\n", rc);
}
}
else
{
acc_read_value = (int)result.physical;
pr_info("%s: acc_read_value - %d\n", __func__, (int)result.physical);
break;
}
}
}
set_bit(EV_SYN, hi->input->evbit);
set_bit(EV_KEY, hi->input->evbit);
set_bit(EV_SW, hi->input->evbit);
set_bit(hi->key_code, hi->input->keybit);
set_bit(SW_HEADPHONE_INSERT, hi->input->swbit);
set_bit(SW_MICROPHONE_INSERT, hi->input->swbit);
input_set_capability(hi->input, EV_KEY, KEY_MEDIA);
input_set_capability(hi->input, EV_KEY, KEY_VOLUMEUP);
input_set_capability(hi->input, EV_KEY, KEY_VOLUMEDOWN);
ret = input_register_device(hi->input);
if (ret) {
HSD_ERR("Failed to register input device\n");
goto error_09;
}
if (!(hi->gpio_get_value_func(hi->gpio_detect)))
#ifdef CONFIG_MAX1462X_USE_LOCAL_WORK_QUEUE
/* to detect in initialization with eacjack insertion */
queue_work(local_max1462x_workqueue, &(hi->work));
#else
/* to detect in initialization with eacjack insertion */
schedule_work(&(hi->work));
#endif
return ret;
error_09:
input_free_device(hi->input);
error_08:
switch_dev_unregister(&hi->sdev);
error_07:
free_irq(hi->irq_detect, 0);
error_06:
free_irq(hi->irq_key, 0);
error_04:
gpio_free(hi->gpio_key);
error_03:
gpio_free(hi->gpio_detect);
error_02:
gpio_free(hi->gpio_mic_en);
kfree(hi);
return ret;
}
static int sec_therm_get_adc_data(struct sec_therm_info *info)
{
int rc = 0;
int adc_max = 0;
int adc_min = 0;
int adc_total = 0;
int i, adc_data;
#if defined (CONFIG_ARCH_MSM8226)
struct qpnp_vadc_result results;
for (i = 0; i < ADC_SAMPLING_CNT; i++) {
rc = qpnp_vadc_read(therm_vadc_dev, P_MUX2_1_1, &results);
if (rc) {
pr_err("error reading AMUX %d, rc = %d\n", P_MUX2_1_1, rc);
goto err;
}
adc_data = results.adc_code;
//pr_err("########## reading P_MUX2_1_1 [rc = %d] [adc_code = %d]\n", rc, results.adc_code);
#else
struct pm8xxx_adc_chan_result result;
#if defined (CONFIG_MACH_LT02)
int system_rev = msm8930_get_board_rev();
#endif
for (i = 0; i < ADC_SAMPLING_CNT; i++) {
#if defined (CONFIG_MACH_LT02)
if (system_rev >= 2)
rc = pm8xxx_adc_mpp_config_read(PM8XXX_AMUX_MPP_3,
ADC_MPP_1_AMUX6, &result);
else
rc = pm8xxx_adc_mpp_config_read(PM8XXX_AMUX_MPP_4,
ADC_MPP_1_AMUX6, &result);
#else
rc = pm8xxx_adc_mpp_config_read(PM8XXX_AMUX_MPP_4,
ADC_MPP_1_AMUX6, &result);
#endif
if (rc) {
pr_err("error reading mpp %d, rc = %d\n",
PM8XXX_AMUX_MPP_4, rc);
goto err;
}
adc_data = (int)result.measurement;
pr_err("reading PM8XXX_AMUX_MPP_4 [rc = %d] [measurement = %lld]\n", rc,result.measurement);
#endif
if (i != 0) {
if (adc_data > adc_max)
adc_max = adc_data;
else if (adc_data < adc_min)
adc_min = adc_data;
} else {
adc_max = adc_data;
adc_min = adc_data;
}
adc_total += adc_data;
}
return (adc_total - adc_max - adc_min) / (ADC_SAMPLING_CNT - 2);
err:
return rc;
}
static int convert_adc_to_temper(struct sec_therm_info *info, unsigned int adc)
{
int low = 0;
int high = 0;
int mid = 0;
int temp = 0;
int temp2 = 0;
if (!info->pdata->adc_table || !info->pdata->adc_arr_size) {
/* using fake temp */
return 300;
}
high = info->pdata->adc_arr_size - 1;
if (info->pdata->adc_table[low].adc >= adc) {
temp = info->pdata->adc_table[low].temperature;
goto convert_adc_to_temp_goto;
} else if (info->pdata->adc_table[high].adc <= adc) {
temp = info->pdata->adc_table[high].temperature;
goto convert_adc_to_temp_goto;
}
while (low <= high) {
mid = (low + high) / 2;
if (info->pdata->adc_table[mid].adc > adc) {
high = mid - 1;
} else if (info->pdata->adc_table[mid].adc < adc) {
low = mid + 1;
} else {
temp = info->pdata->adc_table[mid].temperature;
goto convert_adc_to_temp_goto;
}
}
temp = info->pdata->adc_table[high].temperature;
temp2 = (info->pdata->adc_table[low].temperature -
info->pdata->adc_table[high].temperature) *
(adc - info->pdata->adc_table[high].adc);
temp += temp2 /
(info->pdata->adc_table[low].adc -
info->pdata->adc_table[high].adc);
convert_adc_to_temp_goto:
return temp;
}
static void msm_thermal_main(struct work_struct *work)
{
struct qpnp_vadc_result result;
enum thermal_state old_throttle;
int64_t temp;
int ret;
ret = qpnp_vadc_read(t_conf->vadc_dev, t_conf->adc_chan, &result);
if (ret) {
pr_err("Unable to read ADC channel\n");
goto reschedule;
}
temp = result.physical;
old_throttle = t_pol->cpu_throttle;
/* Low trip point */
if ((temp >= t_conf->trip_low_degC) &&
(temp < t_conf->trip_mid_degC) &&
(t_pol->cpu_throttle == UNTHROTTLE)) {
t_pol->throttle_freq = t_conf->freq_low_KHz;
t_pol->cpu_throttle = LOW_THROTTLE;
/* Low clear point */
} else if ((temp <= t_conf->reset_low_degC) &&
(t_pol->cpu_throttle > UNTHROTTLE)) {
t_pol->cpu_throttle = UNTHROTTLE;
/* Mid trip point */
} else if ((temp >= t_conf->trip_mid_degC) &&
(temp < t_conf->trip_high_degC) &&
(t_pol->cpu_throttle < MID_THROTTLE)) {
t_pol->throttle_freq = t_conf->freq_mid_KHz;
t_pol->cpu_throttle = MID_THROTTLE;
/* Mid clear point */
} else if ((temp < t_conf->reset_mid_degC) &&
(t_pol->cpu_throttle > LOW_THROTTLE)) {
t_pol->throttle_freq = t_conf->freq_low_KHz;
t_pol->cpu_throttle = LOW_THROTTLE;
/* High trip point */
} else if ((temp >= t_conf->trip_high_degC) &&
(t_pol->cpu_throttle < HIGH_THROTTLE)) {
t_pol->throttle_freq = t_conf->freq_high_KHz;
t_pol->cpu_throttle = HIGH_THROTTLE;
/* High clear point */
} else if ((temp < t_conf->reset_high_degC) &&
(t_pol->cpu_throttle > MID_THROTTLE)) {
t_pol->throttle_freq = t_conf->freq_mid_KHz;
t_pol->cpu_throttle = MID_THROTTLE;
}
/* Thermal state changed */
if (t_pol->cpu_throttle != old_throttle) {
if (t_pol->cpu_throttle)
pr_warn("Setting CPU to %uKHz! temp: %lluC\n",
t_pol->throttle_freq, temp);
else
pr_warn("CPU unthrottled! temp: %lluC\n", temp);
/* Immediately enforce new thermal policy on online CPUs */
update_online_cpu_policy();
}
reschedule:
queue_delayed_work(thermal_wq, &thermal_work,
msecs_to_jiffies(t_conf->sampling_ms));
}
static long tcmd_misc_ioctl( struct file *file,
unsigned int cmd, unsigned long arg)
{
#ifdef CONFIG_TCMD
void __user *argp = (void __user *)arg;
int gpio_enum = -1, irq = -1, gpio_state = -1, rc = 0;
pr_info("tcmd_misc_ioctl is called");
switch(cmd)
{
case TCMD_IOCTL_SET_REG:
case TCMD_IOCTL_GET_REG:
{
tcmd_reg_arg reg_arg;
struct regulator *reg_p;
printk("TCMD_IOCTL_SET_REG or GET");
if (copy_from_user(®_arg, argp, sizeof(tcmd_reg_arg)))
return -EFAULT;
reg_p = regulator_get(NULL,reg_arg.name );
if (IS_ERR(reg_p))
{
printk("%s: VREG reg_p get failed\n", __func__);
reg_p = NULL;
return -EFAULT;
}
if(cmd == TCMD_IOCTL_GET_REG ) {
printk("cmd == TCMD_IOCTL_GET_REG ");
if(TCMD_REG_GET_VOLTAGE == reg_arg.cmd)
{ printk("cmd == TCMD_REG_GET_VOLTAGE ");
reg_arg.param = regulator_get_voltage(reg_p);
} else if(TCMD_REG_GET_POWER_MODE == reg_arg.cmd)
{
reg_arg.param = regulator_get_mode(reg_p);
}
if(copy_to_user((tcmd_reg_arg *)argp, ®_arg, sizeof(tcmd_reg_arg )))
return -EFAULT;
}
else {
switch(reg_arg.cmd)
{
case TCMD_REG_ENABLE :
printk("TCMD_REGULATOR_ENABLE\n");
rc = regulator_enable(reg_p);
if (rc) {
pr_info( " regulator_enable failed:%d\n", rc);
return rc;
}
break;
case TCMD_REG_DISABLE:
printk("TCMD_REGULATOR_DISABLE\n");
rc = regulator_disable(reg_p);
if (rc) {
pr_info( " regulator_disable failed:%d\n", rc);
return rc;
}
break;
case TCMD_REG_SET_VOLTAGE :
pr_info("TCMD_REG_SET_VOLTAGE, reg_arg.param= %d\n",reg_arg.param);
rc = regulator_set_voltage(reg_p, reg_arg.param, reg_arg.param);
if (rc) {
pr_info( " regulator_set_voltage failed:%d\n", rc);
return rc;
}
break;
case TCMD_REG_SET_POWER_MODE :
pr_info("TCMD_REG_SET_POWER_MODE, reg_arg.param= %d\n",reg_arg.param);
rc = regulator_set_mode(reg_p, reg_arg.param);
if (rc) {
pr_info( " regulator_set_mode failed:%d\n", rc);
return rc;
}
break;
default:
return -EINVAL;
break;
}
}
break;
}
case TCMD_IOCTL_CHARGER:
{
unsigned char charger_enable;
pr_info("cmd == TCMD_IOCTL_CHARGER");
if (copy_from_user(&charger_enable, argp, sizeof(unsigned char )))
return -EFAULT;
switch(charger_enable)
{
case 0:
rc = qpnp_disable_source_current(true);
if (rc)
{
printk("TCMD :tcmd_driver : qpnp_disable_source_current failed:%d\n", rc);
return rc;
}
break;
case 1:
rc = qpnp_set_max_battery_charge_current(true);
if (rc)
{
pr_info("TCMD : tcmd_driver : qpnp_set_max_battery_charge_current(true) failed:%d\n", rc);
return rc;
}
rc = qpnp_disable_source_current(false);
if (rc)
{
pr_info("TCMD : tcmd_driver : qpnp_disable_source_current(false) failed:%d\n", rc);
return rc;
}
printk("TCMD : Enable charging with high current successful");
break;
case 2:
rc = qpnp_set_max_battery_charge_current(false);
if (rc)
{
printk("TCMD : tcmd_driver : qpnp_set_max_battery_charge_current(false) failed:%d\n", rc);
return rc;
}
rc = qpnp_disable_source_current(false);
if (rc)
{
pr_info("TCMD : tcmd_driver : qpnp_disable_source_current(false) failed:%d\n", rc);
return rc;
}
printk("TCMD : Enable charging with low current successful");
break;
break;
default:
return -EINVAL;
break;
}
break;
}
case TCMD_IOCTL_USB_CHRGING:
{
unsigned char usb_charger_enable;
pr_info("TCMD: cmd = TCMD_IOCTL_USB_CHRGING");
if(copy_from_user(&usb_charger_enable, argp, sizeof(unsigned char)))
return -EFAULT;
switch(usb_charger_enable)
{
case 0:
printk("TCMD: tcmd_driver : Disable USB charging\n");
rc = qpnp_disable_usb_charging(!usb_charger_enable);
if(rc) {
printk("TCMD: qpnp-charger disable usb charging failed:%d\n", rc);
return rc;
}
break;
case 1:
printk("TCMD: tcmd_driver : Enable USB charging\n");
rc = qpnp_disable_usb_charging(!usb_charger_enable);
if(rc) {
printk("TCMD: qpnp-charger enable usb charging failed:%d\n", rc);
return rc;
}
}
break;
}
case TCMD_IOCTL_CHGPTH_PRIORITY:
{
unsigned char charging_path_priority;
pr_info("TCMD: cmd = TCMD_IOCTL_CHGPTH_PRIORITY\n");
if(copy_from_user(&charging_path_priority, argp, sizeof(unsigned char)))
return -EFAULT;
switch(charging_path_priority)
{
case 0:
printk("TCMD: tcmd_driver : USB_IN priority \n");
rc = qpnp_chg_priority(charging_path_priority);
if(rc) {
printk("TCMD: qpnp_chg_priority USB_IN failed:%d\n", rc);
return rc;
}
break;
case 1:
printk("TCMD: tcmd_driver : DC_IN priority \n");
rc = qpnp_chg_priority(charging_path_priority);
if(rc) {
printk("TCMD: qpnp_chg_priority DC_IN failed:%d\n", rc);
return rc;
}
}
break;
}
/*case TCMD_IOCTL_SET_FLASH_LM3559:
{
int flash_lm3559_state;
pr_info("TCMD_IOCTL_SET_FLASH_LM3559\n");
if(copy_from_user(&flash_lm3559_state, argp, sizeof(int)))
return -EFAULT;
rc = lm3559_flash_set_led_state(flash_lm3559_state);
if(rc){
pr_info("Error on calling set_flash_lm3559\n");
return rc;
}
break;
}*/
case TCMD_IOCTL_POWER_DOWN:
{
pr_info("TCMD_IOCTL_POWER_DOWN\n");
kernel_power_off();
break;
}
case TCMD_IOCTL_GET_ADC:
{
TCMD_QPNP_VADC_CHAN_PARAM adc_arg;
//struct qpnp_vadc_chip *vadc;
int ibat_ua;
printk("TCMD_IOCTL_GET_ADC");
if (copy_from_user(&adc_arg, argp, sizeof(TCMD_QPNP_VADC_CHAN_PARAM)))
return -EFAULT;
printk("adc_arg.cmd: %d",adc_arg.cmd);
if(!vchip)
{
printk("vchip is NULL\n");
}
if (adc_arg.cmd == TCMD_PMIC_ADC_BATTERY_CURRENT) {
printk("adc_arg.cmd == TCMD_PMIC_ADC_BATTERY_CURRENT");
rc = tcmd_get_battery_current(&ibat_ua);
adc_arg.adc_config.physical = ibat_ua;
adc_arg.adc_config.measurement = adc_arg.adc_config.physical;
} else {
rc = qpnp_vadc_read(vchip, adc_arg.cmd, &adc_arg.adc_config);
}
if (rc) {
pr_info("Error on calling qpnp_vadc_read");
return rc;
}
if(copy_to_user((TCMD_QPNP_VADC_CHAN_PARAM *)argp, &adc_arg, sizeof(TCMD_QPNP_VADC_CHAN_PARAM)))
return -EFAULT;
break;
}
case TCMD_IOCTL_SET_GPIO:
{
TCMD_PM8XXX_GPIO_PARAM gpio_arg;
printk("TCMD_IOCTL_SET_GPIO");
if (copy_from_user(&gpio_arg, argp, sizeof(TCMD_PM8XXX_GPIO_PARAM)))
return -EFAULT;
printk("gpio_arg.cmd: %d", gpio_arg.cmd);
rc = pm8xxx_gpio_config(gpio_arg.cmd, &gpio_arg.gpio_config);
if (rc) {
pr_info("Error on calling pm8xxx_gpio_config");
return rc;
}
break;
}
case TCMD_IOCTL_GET_USB_BAT_CURRENT:
{
int rc = -1;
TCMD_REG_USB_BAT_CURRENT adc_arg;
printk("TCMD_IOCTL_GET_USB_BAT_CURRENT");
if (copy_from_user(&adc_arg, argp, sizeof(TCMD_REG_USB_BAT_CURRENT)))
{
return -EFAULT;
}
qpnp_get_usb_max_current(&adc_arg.usbPresentCurrent);
rc = qpnp_get_bat_max_current(&adc_arg.batPresentCurrent);
if(rc < 0)
{
return rc;
}
if(copy_to_user((TCMD_REG_USB_BAT_CURRENT *)argp, &adc_arg, sizeof(TCMD_REG_USB_BAT_CURRENT)))
return -EFAULT;
return rc;
}
case TCMD_IOCTL_SET_USB_BAT_CURRENT:
{
int rc = -1;
TCMD_REG_USB_BAT_CURRENT adc_arg;
printk("TCMD_IOCTL_GET_USB_BAT_CURRENT");
if (copy_from_user(&adc_arg, argp, sizeof(TCMD_REG_USB_BAT_CURRENT)))
{
return -EFAULT;
}
rc = qpnp_set_usb_max_current(adc_arg.usbPresentCurrent);
if(rc < 0)
{
return rc;
}
rc = qpnp_set_bat_max_current(adc_arg.batPresentCurrent);
return rc;
}
case TCMD_IOCTL_COINCELL_ENABLE_DISABLE:
{
int coincell_state;
pr_info("TCMD_IOCTL_COINCELL_ENABLE_DISABLE\n");
if(copy_from_user(&coincell_state, argp, sizeof(int)))
return -EFAULT;
printk("TCMD:Set charger state entering with value : %d",coincell_state);
rc = tcmd_qpnp_coincell_set_charger(coincell_state);
if(rc) {
pr_info("Error on calling tcmd_qpnp_coincell_set_charger\n");
printk("TCMD:Error on calling tcms_qpnp_coincell_set_charger : %d",rc);
return rc;
}
printk("TCMD:Set charger state out with value : %d",rc);
break;
}
case TCMD_IOCTL_SET_COINCELL:
{
TCMD_QPNP_CC_CHG_PARAM coincell_arg;
printk("TCMD_IOCTL_SET_COINCELL");
if (copy_from_user(&coincell_arg, argp, sizeof(TCMD_QPNP_CC_CHG_PARAM)))
return -EFAULT;
//rc = pm8xxx_coincell_chg_config(&coincell_arg);
printk("\nState - > %d \n Voltage - > %d \n Resistance -> %d \n",coincell_arg.state,coincell_arg.voltage,coincell_arg.resistance);
if((rc = tcmd_qpnp_coincell_set_charger(coincell_arg.state))) {
printk("Error in configuring the state : tcmd_qpnp_coincell_set_charger : rc= %d",rc);
return rc;
}
if((rc = tcmd_qpnp_coincell_set_voltage(coincell_arg.voltage))) {
printk("Error in configuring Voltage :tcmd_qpnp_coincell_set_voltage: rc= %d",rc);
return rc;
}
if((rc = tcmd_qpnp_coincell_set_resistance(coincell_arg.resistance))) {
printk("Error in configuring Resistance :tcmd_qpnp_coincell_set_resistance : rc= %d",rc);
return rc;
}
if (rc) {
pr_info("Error on calling pm8xxx_coincell_chg_config ");
printk("value of rc = %d",rc);
return rc;
}
break;
}
/* case TCMD_IOCTL_SET_VIBRATOR:
{
TCMD_PM8XXX_VIB_PARAM vib_arg;
printk("TCMD_IOCTL_SET_VIBRATOR");
if (copy_from_user(&vib_arg, argp, sizeof(TCMD_PM8XXX_VIB_PARAM)))
return -EFAULT;
rc = pm8xxx_vibrator_config(&vib_arg);
if (rc) {
pr_info("Error on calling pm8xxx_vibrator_config");
return rc;
}
break;
}*/
default:
{
struct tcmd_gpio_set_arg gpio_set_arg;
if (cmd == TCMD_IOCTL_SET_INT) {
if (copy_from_user(&gpio_set_arg, argp, 2))
return -EFAULT;
gpio_enum = gpio_set_arg.gpio;
gpio_state = gpio_set_arg.gpio_state;
}
else if (copy_from_user(&gpio_enum, argp, sizeof(int)))
return -EFAULT;
if (gpio_enum < 0)
return -EINVAL;
switch (cmd) {
case TCMD_IOCTL_MASK_INT:
case TCMD_IOCTL_UNMASK_INT:
irq = gpio_to_irq(gpio_enum);
if (irq < 0)
return -EINVAL;
break;
default:
break;
}
switch (cmd) {
case TCMD_IOCTL_MASK_INT:
pr_info("tcmd mask interrupt: gpio = %d, irq = %d.\n",
gpio_enum, irq);
disable_irq(irq);
break;
case TCMD_IOCTL_UNMASK_INT:
pr_info("tcmd unmask interrupt: gpio = %d, irq = %d.\n",
gpio_enum, irq);
enable_irq(irq);
break;
case TCMD_IOCTL_READ_INT:
gpio_state = gpio_get_value(gpio_enum);
pr_info("tcmd interrupt state: gpio = %d -> %d.\n",
gpio_enum, gpio_state);
if (copy_to_user(argp, &gpio_state, sizeof(int)))
return -EFAULT;
break;
case TCMD_IOCTL_SET_INT:
pr_info("tcmd set interrupt state: gpio = %d -> %d.\n",
gpio_enum, gpio_state);
gpio_set_value(gpio_enum, gpio_state);
break;
default:
return -EINVAL;
}
break;
}//default
}
#endif
return 0;
}
int lge_pm_get_cable_info(struct qpnp_vadc_chip *vadc,
struct chg_cable_info *cable_info)
{
char *type_str[] = {
"NOT INIT", "MHL 1K", "U_28P7K", "28P7K", "56K",
"100K", "130K", "180K", "200K", "220K",
"270K", "330K", "620K", "910K", "OPEN"
};
struct qpnp_vadc_result result;
struct chg_cable_info *info = cable_info;
struct chg_cable_info_table *table;
int table_size = ARRAY_SIZE(lge_acc_cable_type_data);
int acc_read_value = 0;
int i, rc;
int count = 1;
if (!info) {
pr_err("%s : invalid info parameters\n", __func__);
return -EINVAL;
}
if (!vadc) {
pr_err("%s : invalid vadc parameters\n", __func__);
return -EINVAL;
}
if (!cable_type_defined) {
pr_err("%s : cable type is not defined yet.\n", __func__);
return -EINVAL;
}
for (i = 0; i < count; i++) {
rc = qpnp_vadc_read(vadc, LR_MUX10_USB_ID_LV, &result);
if (rc < 0) {
if (rc == -ETIMEDOUT) {
/* reason: adc read timeout,
* assume it is open cable
*/
info->cable_type = CABLE_NONE;
info->ta_ma = C_NONE_TA_MA;
info->usb_ma = C_NONE_USB_MA;
}
pr_err("%s : adc read error - %d\n", __func__, rc);
return rc;
}
acc_read_value = (int)result.physical;
pr_info("%s : adc_read-%d\n", __func__, (int)result.physical);
/* mdelay(10); */
}
info->cable_type = NO_INIT_CABLE;
info->ta_ma = C_NO_INIT_TA_MA;
info->usb_ma = C_NO_INIT_USB_MA;
/* assume: adc value must be existed in ascending order */
for (i = 0; i < table_size; i++) {
table = &lge_acc_cable_type_data[i];
if (acc_read_value <= table->threshhold) {
info->cable_type = table->type;
info->ta_ma = table->ta_ma;
info->usb_ma = table->usb_ma;
break;
}
}
pr_err("\n\n[PM]Cable detected: %d(%s)(%d, %d)\n\n",
acc_read_value, type_str[info->cable_type],
info->ta_ma, info->usb_ma);
return 0;
}
static int sec_bat_adc_ap_read(struct sec_battery_info *battery, int channel)
{
struct qpnp_vadc_result results;
int rc = -1;
int data = -1;
switch (channel)
{
case SEC_BAT_ADC_CHANNEL_TEMP:
rc = qpnp_vadc_read(adc_client, LR_MUX1_BATT_THERM, &results);
if (rc) {
pr_err("%s: Unable to read batt temperature rc=%d\n",
__func__, rc);
return 0;
}
data = results.adc_code;
break;
case SEC_BAT_ADC_CHANNEL_TEMP_AMBIENT:
data = 33000;
break;
case SEC_BAT_ADC_CHANNEL_BAT_CHECK:
rc = qpnp_vadc_read(adc_client, LR_MUX2_BAT_ID, &results);
if (rc) {
pr_err("%s: Unable to read BATT_ID ADC rc=%d\n",
__func__, rc);
return 0;
}
pr_debug("BAT_ID physical= %lld, raw = 0x%x\n", results.physical, results.adc_code);
data = results.physical;
break;
case SEC_BAT_ADC_CHANNEL_INBAT_VOLTAGE:
rc = qpnp_vadc_read(adc_client, VBAT_SNS, &results);
if (rc) {
pr_err("%s: Unable to read VBAT_SNS ADC rc=%d\n",
__func__, rc);
return 0;
}
data = ((int)results.physical)/1000;
break;
case SEC_BAT_ADC_CHANNEL_DISCHARGING_CHECK:
#if defined(CONFIG_MACH_A8_CHN_OPEN)||defined(CONFIG_MACH_GTEL_USA_VZW) || defined(CONFIG_MACH_GTES_USA_SPR) || \
defined(CONFIG_MACH_GTELWIFI_USA_OPEN)
rc = qpnp_vadc_read(adc_client, LR_MUX2_BAT_ID, &results);
#else
rc = qpnp_vadc_read(adc_client, LR_MUX1_BATT_THERM, &results);
#endif
if (rc) {
pr_err("%s: Unable to read discharging_check ADC rc=%d\n",
__func__, rc);
return 0;
}
data = results.adc_code;
break;
case SEC_BAT_ADC_CHANNEL_DISCHARGING_NTC:
return 0;
break;
default :
break;
}
return data;
}
