示例#1
0
acpi_status
acpi_ev_gpe_initialize (void)
{
	u32                     i;
	u32                     j;
	u32                     register_index;
	u32                     gpe_number;
	u16                     gpe0register_count;
	u16                     gpe1_register_count;


	FUNCTION_TRACE ("Ev_gpe_initialize");

	/*
	 * Set up various GPE counts
	 *
	 * You may ask,why are the GPE register block lengths divided by 2?
	 * From the ACPI 2.0 Spec, section, 4.7.1.6 General-Purpose Event
	 * Registers, we have,
	 *
	 * "Each register block contains two registers of equal length
	 * GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the
	 * GPE0_STS and GPE0_EN registers is equal to half the GPE0_LEN
	 * The length of the GPE1_STS and GPE1_EN registers is equal to
	 * half the GPE1_LEN. If a generic register block is not supported
	 * then its respective block pointer and block length values in the
	 * FADT table contain zeros. The GPE0_LEN and GPE1_LEN do not need
	 * to be the same size."
	 */
	gpe0register_count          = (u16) DIV_2 (acpi_gbl_FADT->gpe0blk_len);
	gpe1_register_count         = (u16) DIV_2 (acpi_gbl_FADT->gpe1_blk_len);
	acpi_gbl_gpe_register_count = gpe0register_count + gpe1_register_count;

	if (!acpi_gbl_gpe_register_count) {
		REPORT_WARNING (("Zero GPEs are defined in the FADT\n"));
		return_ACPI_STATUS (AE_OK);
	}

	/*
	 * Allocate the Gpe information block
	 */
	acpi_gbl_gpe_registers = ACPI_MEM_CALLOCATE (acpi_gbl_gpe_register_count *
			  sizeof (acpi_gpe_registers));
	if (!acpi_gbl_gpe_registers) {
		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
			"Could not allocate the Gpe_registers block\n"));
		return_ACPI_STATUS (AE_NO_MEMORY);
	}

	/*
	 * Allocate the Gpe dispatch handler block
	 * There are eight distinct GP events per register.
	 * Initialization to zeros is sufficient
	 */
	acpi_gbl_gpe_info = ACPI_MEM_CALLOCATE (MUL_8 (acpi_gbl_gpe_register_count) *
			  sizeof (acpi_gpe_level_info));
	if (!acpi_gbl_gpe_info) {
		ACPI_MEM_FREE (acpi_gbl_gpe_registers);
		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Could not allocate the Gpe_info block\n"));
		return_ACPI_STATUS (AE_NO_MEMORY);
	}

	/* Set the Gpe validation table to GPE_INVALID */

	MEMSET (acpi_gbl_gpe_valid, (int) ACPI_GPE_INVALID, ACPI_NUM_GPE);

	/*
	 * Initialize the Gpe information and validation blocks.  A goal of these
	 * blocks is to hide the fact that there are two separate GPE register sets
	 * In a given block, the status registers occupy the first half, and
	 * the enable registers occupy the second half.
	 */

	/* GPE Block 0 */

	register_index = 0;

	for (i = 0; i < gpe0register_count; i++) {
		acpi_gbl_gpe_registers[register_index].status_addr =
				 (u16) (ACPI_GET_ADDRESS (acpi_gbl_FADT->Xgpe0blk.address) + i);

		acpi_gbl_gpe_registers[register_index].enable_addr =
				 (u16) (ACPI_GET_ADDRESS (acpi_gbl_FADT->Xgpe0blk.address) + i + gpe0register_count);

		acpi_gbl_gpe_registers[register_index].gpe_base = (u8) MUL_8 (i);

		for (j = 0; j < 8; j++) {
			gpe_number = acpi_gbl_gpe_registers[register_index].gpe_base + j;
			acpi_gbl_gpe_valid[gpe_number] = (u8) register_index;
		}

		/*
		 * Clear the status/enable registers.  Note that status registers
		 * are cleared by writing a '1', while enable registers are cleared
		 * by writing a '0'.
		 */
		acpi_os_write_port (acpi_gbl_gpe_registers[register_index].enable_addr, 0x00, 8);
		acpi_os_write_port (acpi_gbl_gpe_registers[register_index].status_addr, 0xFF, 8);

		register_index++;
	}

	/* GPE Block 1 */

	for (i = 0; i < gpe1_register_count; i++) {
		acpi_gbl_gpe_registers[register_index].status_addr =
				 (u16) (ACPI_GET_ADDRESS (acpi_gbl_FADT->Xgpe1_blk.address) + i);

		acpi_gbl_gpe_registers[register_index].enable_addr =
				 (u16) (ACPI_GET_ADDRESS (acpi_gbl_FADT->Xgpe1_blk.address) + i + gpe1_register_count);

		acpi_gbl_gpe_registers[register_index].gpe_base =
				 (u8) (acpi_gbl_FADT->gpe1_base + MUL_8 (i));

		for (j = 0; j < 8; j++) {
			gpe_number = acpi_gbl_gpe_registers[register_index].gpe_base + j;
			acpi_gbl_gpe_valid[gpe_number] = (u8) register_index;
		}

		/*
		 * Clear the status/enable registers.  Note that status registers
		 * are cleared by writing a '1', while enable registers are cleared
		 * by writing a '0'.
		 */
		acpi_os_write_port (acpi_gbl_gpe_registers[register_index].enable_addr, 0x00, 8);
		acpi_os_write_port (acpi_gbl_gpe_registers[register_index].status_addr, 0xFF, 8);

		register_index++;
	}

	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "GPE registers: %[email protected]%8.8X%8.8X (Blk0) %[email protected]%8.8X%8.8X (Blk1)\n",
		gpe0register_count, HIDWORD(acpi_gbl_FADT->Xgpe0blk.address), LODWORD(acpi_gbl_FADT->Xgpe0blk.address),
		gpe1_register_count, HIDWORD(acpi_gbl_FADT->Xgpe1_blk.address), LODWORD(acpi_gbl_FADT->Xgpe1_blk.address)));

	return_ACPI_STATUS (AE_OK);
}
示例#2
0
文件: nsinit.c 项目: CSRedRat/reactos
ACPI_STATUS
AcpiNsInitializeDevices (
    void)
{
    ACPI_STATUS             Status;
    ACPI_DEVICE_WALK_INFO   Info;


    ACPI_FUNCTION_TRACE (NsInitializeDevices);


    /* Init counters */

    Info.DeviceCount = 0;
    Info.Num_STA = 0;
    Info.Num_INI = 0;

    ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INIT,
        "Initializing Device/Processor/Thermal objects "
        "and executing _INI/_STA methods:\n"));

    /* Tree analysis: find all subtrees that contain _INI methods */

    Status = AcpiNsWalkNamespace (ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
        ACPI_UINT32_MAX, FALSE, AcpiNsFindIniMethods, NULL, &Info, NULL);
    if (ACPI_FAILURE (Status))
    {
        goto ErrorExit;
    }

    /* Allocate the evaluation information block */

    Info.EvaluateInfo = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_EVALUATE_INFO));
    if (!Info.EvaluateInfo)
    {
        Status = AE_NO_MEMORY;
        goto ErrorExit;
    }

    /*
     * Execute the "global" _INI method that may appear at the root. This
     * support is provided for Windows compatibility (Vista+) and is not
     * part of the ACPI specification.
     */
    Info.EvaluateInfo->PrefixNode = AcpiGbl_RootNode;
    Info.EvaluateInfo->RelativePathname = METHOD_NAME__INI;
    Info.EvaluateInfo->Parameters = NULL;
    Info.EvaluateInfo->Flags = ACPI_IGNORE_RETURN_VALUE;

    Status = AcpiNsEvaluate (Info.EvaluateInfo);
    if (ACPI_SUCCESS (Status))
    {
        Info.Num_INI++;
    }

    /* Walk namespace to execute all _INIs on present devices */

    Status = AcpiNsWalkNamespace (ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
        ACPI_UINT32_MAX, FALSE, AcpiNsInitOneDevice, NULL, &Info, NULL);

    /*
     * Any _OSI requests should be completed by now. If the BIOS has
     * requested any Windows OSI strings, we will always truncate
     * I/O addresses to 16 bits -- for Windows compatibility.
     */
    if (AcpiGbl_OsiData >= ACPI_OSI_WIN_2000)
    {
        AcpiGbl_TruncateIoAddresses = TRUE;
    }

    ACPI_FREE (Info.EvaluateInfo);
    if (ACPI_FAILURE (Status))
    {
        goto ErrorExit;
    }

    ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INIT,
        "    Executed %u _INI methods requiring %u _STA executions "
        "(examined %u objects)\n",
        Info.Num_INI, Info.Num_STA, Info.DeviceCount));

    return_ACPI_STATUS (Status);


ErrorExit:
    ACPI_EXCEPTION ((AE_INFO, Status, "During device initialization"));
    return_ACPI_STATUS (Status);
}
示例#3
0
/*******************************************************************************
 *
 * FUNCTION:    ns_one_complete_parse
 *
 * PARAMETERS:  pass_number             - 1 or 2
 *              table_desc              - The table to be parsed.
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Perform one complete parse of an ACPI/AML table.
 *
 ******************************************************************************/
acpi_status
acpi_ns_one_complete_parse(acpi_native_uint pass_number,
			   acpi_native_uint table_index)
{
	union acpi_parse_object *parse_root;
	acpi_status status;
	acpi_native_uint aml_length;
	u8 *aml_start;
	struct acpi_walk_state *walk_state;
	struct acpi_table_header *table;
	acpi_owner_id owner_id;

	ACPI_FUNCTION_TRACE(ns_one_complete_parse);

	status = acpi_tb_get_owner_id(table_index, &owner_id);
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	/* Create and init a Root Node */

	parse_root = acpi_ps_create_scope_op();
	if (!parse_root) {
		return_ACPI_STATUS(AE_NO_MEMORY);
	}

	/* Create and initialize a new walk state */

	walk_state = acpi_ds_create_walk_state(owner_id, NULL, NULL, NULL);
	if (!walk_state) {
		acpi_ps_free_op(parse_root);
		return_ACPI_STATUS(AE_NO_MEMORY);
	}

	status = acpi_get_table_by_index(table_index, &table);
	if (ACPI_FAILURE(status)) {
		acpi_ds_delete_walk_state(walk_state);
		acpi_ps_free_op(parse_root);
		return_ACPI_STATUS(status);
	}

	/* Table must consist of at least a complete header */

	if (table->length < sizeof(struct acpi_table_header)) {
		status = AE_BAD_HEADER;
	} else {
		aml_start = (u8 *) table + sizeof(struct acpi_table_header);
		aml_length = table->length - sizeof(struct acpi_table_header);
		status = acpi_ds_init_aml_walk(walk_state, parse_root, NULL,
					       aml_start, aml_length, NULL,
					       (u8) pass_number);
	}

	if (ACPI_FAILURE(status)) {
		acpi_ds_delete_walk_state(walk_state);
		acpi_ps_delete_parse_tree(parse_root);
		return_ACPI_STATUS(status);
	}

	/* Parse the AML */

	ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "*PARSE* pass %d parse\n",
			  (unsigned)pass_number));
	status = acpi_ps_parse_aml(walk_state);

	acpi_ps_delete_parse_tree(parse_root);
	return_ACPI_STATUS(status);
}
示例#4
0
文件: exfield.c 项目: poppoo/acpica-1
ACPI_STATUS
AcpiExReadDataFromField (
    ACPI_WALK_STATE         *WalkState,
    ACPI_OPERAND_OBJECT     *ObjDesc,
    ACPI_OPERAND_OBJECT     **RetBufferDesc)
{
    ACPI_STATUS             Status;
    ACPI_OPERAND_OBJECT     *BufferDesc;
    ACPI_SIZE               Length;
    void                    *Buffer;
    UINT32                  Function;
    UINT16                  AccessorType;


    ACPI_FUNCTION_TRACE_PTR (ExReadDataFromField, ObjDesc);


    /* Parameter validation */

    if (!ObjDesc)
    {
        return_ACPI_STATUS (AE_AML_NO_OPERAND);
    }
    if (!RetBufferDesc)
    {
        return_ACPI_STATUS (AE_BAD_PARAMETER);
    }

    if (ObjDesc->Common.Type == ACPI_TYPE_BUFFER_FIELD)
    {
        /*
         * If the BufferField arguments have not been previously evaluated,
         * evaluate them now and save the results.
         */
        if (!(ObjDesc->Common.Flags & AOPOBJ_DATA_VALID))
        {
            Status = AcpiDsGetBufferFieldArguments (ObjDesc);
            if (ACPI_FAILURE (Status))
            {
                return_ACPI_STATUS (Status);
            }
        }
    }
    else if ((ObjDesc->Common.Type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
             (ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_SMBUS ||
              ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_GSBUS ||
              ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_IPMI))
    {
        /*
         * This is an SMBus, GSBus or IPMI read. We must create a buffer to hold
         * the data and then directly access the region handler.
         *
         * Note: SMBus and GSBus protocol value is passed in upper 16-bits of Function
         */
        if (ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_SMBUS)
        {
            Length = ACPI_SMBUS_BUFFER_SIZE;
            Function = ACPI_READ | (ObjDesc->Field.Attribute << 16);
        }
        else if (ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_GSBUS)
        {
            AccessorType = ObjDesc->Field.Attribute;
            Length = AcpiExGetSerialAccessLength (AccessorType,
                ObjDesc->Field.AccessLength);

	    /*
             * Add additional 2 bytes for modeled GenericSerialBus data buffer:
             * typedef struct {
             *     BYTEStatus; // Byte 0 of the data buffer
             *     BYTELength; // Byte 1 of the data buffer
             *     BYTE[x-1]Data; // Bytes 2-x of the arbitrary length data buffer,
             * }
	     */
            Length += 2;
            Function = ACPI_READ | (AccessorType << 16);
        }
        else /* IPMI */
        {
            Length = ACPI_IPMI_BUFFER_SIZE;
            Function = ACPI_READ;
        }

        BufferDesc = AcpiUtCreateBufferObject (Length);
        if (!BufferDesc)
        {
            return_ACPI_STATUS (AE_NO_MEMORY);
        }

        /* Lock entire transaction if requested */

        AcpiExAcquireGlobalLock (ObjDesc->CommonField.FieldFlags);

        /* Call the region handler for the read */

        Status = AcpiExAccessRegion (ObjDesc, 0,
                    ACPI_CAST_PTR (UINT64, BufferDesc->Buffer.Pointer),
                    Function);
        AcpiExReleaseGlobalLock (ObjDesc->CommonField.FieldFlags);
        goto Exit;
    }

    /*
     * Allocate a buffer for the contents of the field.
     *
     * If the field is larger than the current integer width, create
     * a BUFFER to hold it. Otherwise, use an INTEGER. This allows
     * the use of arithmetic operators on the returned value if the
     * field size is equal or smaller than an Integer.
     *
     * Note: Field.length is in bits.
     */
    Length = (ACPI_SIZE) ACPI_ROUND_BITS_UP_TO_BYTES (ObjDesc->Field.BitLength);
    if (Length > AcpiGbl_IntegerByteWidth)
    {
        /* Field is too large for an Integer, create a Buffer instead */

        BufferDesc = AcpiUtCreateBufferObject (Length);
        if (!BufferDesc)
        {
            return_ACPI_STATUS (AE_NO_MEMORY);
        }
        Buffer = BufferDesc->Buffer.Pointer;
    }
    else
    {
        /* Field will fit within an Integer (normal case) */

        BufferDesc = AcpiUtCreateIntegerObject ((UINT64) 0);
        if (!BufferDesc)
        {
            return_ACPI_STATUS (AE_NO_MEMORY);
        }

        Length = AcpiGbl_IntegerByteWidth;
        Buffer = &BufferDesc->Integer.Value;
    }

    ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
        "FieldRead [TO]:   Obj %p, Type %X, Buf %p, ByteLen %X\n",
        ObjDesc, ObjDesc->Common.Type, Buffer, (UINT32) Length));
    ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
        "FieldRead [FROM]: BitLen %X, BitOff %X, ByteOff %X\n",
        ObjDesc->CommonField.BitLength,
        ObjDesc->CommonField.StartFieldBitOffset,
        ObjDesc->CommonField.BaseByteOffset));

    /* Lock entire transaction if requested */

    AcpiExAcquireGlobalLock (ObjDesc->CommonField.FieldFlags);

    /* Read from the field */

    Status = AcpiExExtractFromField (ObjDesc, Buffer, (UINT32) Length);
    AcpiExReleaseGlobalLock (ObjDesc->CommonField.FieldFlags);


Exit:
    if (ACPI_FAILURE (Status))
    {
        AcpiUtRemoveReference (BufferDesc);
    }
    else
    {
        *RetBufferDesc = BufferDesc;
    }

    return_ACPI_STATUS (Status);
}
示例#5
0
ACPI_STATUS
AcpiEvAddressSpaceDispatch (
    ACPI_OPERAND_OBJECT     *RegionObj,
    ACPI_OPERAND_OBJECT     *FieldObj,
    UINT32                  Function,
    UINT32                  RegionOffset,
    UINT32                  BitWidth,
    UINT64                  *Value)
{
    ACPI_STATUS             Status;
    ACPI_ADR_SPACE_HANDLER  Handler;
    ACPI_ADR_SPACE_SETUP    RegionSetup;
    ACPI_OPERAND_OBJECT     *HandlerDesc;
    ACPI_OPERAND_OBJECT     *RegionObj2;
    void                    *RegionContext = NULL;
    ACPI_CONNECTION_INFO    *Context;
    ACPI_PHYSICAL_ADDRESS   Address;


    ACPI_FUNCTION_TRACE (EvAddressSpaceDispatch);


    RegionObj2 = AcpiNsGetSecondaryObject (RegionObj);
    if (!RegionObj2)
    {
        return_ACPI_STATUS (AE_NOT_EXIST);
    }

    /* Ensure that there is a handler associated with this region */

    HandlerDesc = RegionObj->Region.Handler;
    if (!HandlerDesc)
    {
        ACPI_ERROR ((AE_INFO,
            "No handler for Region [%4.4s] (%p) [%s]",
            AcpiUtGetNodeName (RegionObj->Region.Node),
            RegionObj, AcpiUtGetRegionName (RegionObj->Region.SpaceId)));

        return_ACPI_STATUS (AE_NOT_EXIST);
    }

    Context = HandlerDesc->AddressSpace.Context;

    /*
     * It may be the case that the region has never been initialized.
     * Some types of regions require special init code
     */
    if (!(RegionObj->Region.Flags & AOPOBJ_SETUP_COMPLETE))
    {
        /* This region has not been initialized yet, do it */

        RegionSetup = HandlerDesc->AddressSpace.Setup;
        if (!RegionSetup)
        {
            /* No initialization routine, exit with error */

            ACPI_ERROR ((AE_INFO,
                "No init routine for region(%p) [%s]",
                RegionObj, AcpiUtGetRegionName (RegionObj->Region.SpaceId)));
            return_ACPI_STATUS (AE_NOT_EXIST);
        }

        /*
         * We must exit the interpreter because the region setup will
         * potentially execute control methods (for example, the _REG method
         * for this region)
         */
        AcpiExExitInterpreter ();

        Status = RegionSetup (RegionObj, ACPI_REGION_ACTIVATE,
            Context, &RegionContext);

        /* Re-enter the interpreter */

        AcpiExEnterInterpreter ();

        /* Check for failure of the Region Setup */

        if (ACPI_FAILURE (Status))
        {
            ACPI_EXCEPTION ((AE_INFO, Status,
                "During region initialization: [%s]",
                AcpiUtGetRegionName (RegionObj->Region.SpaceId)));
            return_ACPI_STATUS (Status);
        }

        /* Region initialization may have been completed by RegionSetup */

        if (!(RegionObj->Region.Flags & AOPOBJ_SETUP_COMPLETE))
        {
            RegionObj->Region.Flags |= AOPOBJ_SETUP_COMPLETE;

            /*
             * Save the returned context for use in all accesses to
             * the handler for this particular region
             */
            if (!(RegionObj2->Extra.RegionContext))
            {
                RegionObj2->Extra.RegionContext = RegionContext;
            }
        }
    }

    /* We have everything we need, we can invoke the address space handler */

    Handler = HandlerDesc->AddressSpace.Handler;
    Address = (RegionObj->Region.Address + RegionOffset);

    /*
     * Special handling for GenericSerialBus and GeneralPurposeIo:
     * There are three extra parameters that must be passed to the
     * handler via the context:
     *   1) Connection buffer, a resource template from Connection() op
     *   2) Length of the above buffer
     *   3) Actual access length from the AccessAs() op
     *
     * In addition, for GeneralPurposeIo, the Address and BitWidth fields
     * are defined as follows:
     *   1) Address is the pin number index of the field (bit offset from
     *      the previous Connection)
     *   2) BitWidth is the actual bit length of the field (number of pins)
     */
    if ((RegionObj->Region.SpaceId == ACPI_ADR_SPACE_GSBUS) &&
        Context &&
        FieldObj)
    {
        /* Get the Connection (ResourceTemplate) buffer */

        Context->Connection = FieldObj->Field.ResourceBuffer;
        Context->Length = FieldObj->Field.ResourceLength;
        Context->AccessLength = FieldObj->Field.AccessLength;
    }
    if ((RegionObj->Region.SpaceId == ACPI_ADR_SPACE_GPIO) &&
        Context &&
        FieldObj)
    {
        /* Get the Connection (ResourceTemplate) buffer */

        Context->Connection = FieldObj->Field.ResourceBuffer;
        Context->Length = FieldObj->Field.ResourceLength;
        Context->AccessLength = FieldObj->Field.AccessLength;
        Address = FieldObj->Field.PinNumberIndex;
        BitWidth = FieldObj->Field.BitLength;
    }

    ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION,
        "Handler %p (@%p) Address %8.8X%8.8X [%s]\n",
        &RegionObj->Region.Handler->AddressSpace, Handler,
        ACPI_FORMAT_UINT64 (Address),
        AcpiUtGetRegionName (RegionObj->Region.SpaceId)));

    if (!(HandlerDesc->AddressSpace.HandlerFlags &
        ACPI_ADDR_HANDLER_DEFAULT_INSTALLED))
    {
        /*
         * For handlers other than the default (supplied) handlers, we must
         * exit the interpreter because the handler *might* block -- we don't
         * know what it will do, so we can't hold the lock on the intepreter.
         */
        AcpiExExitInterpreter();
    }

    /* Call the handler */

    Status = Handler (Function, Address, BitWidth, Value, Context,
        RegionObj2->Extra.RegionContext);

    if (ACPI_FAILURE (Status))
    {
        ACPI_EXCEPTION ((AE_INFO, Status, "Returned by Handler for [%s]",
            AcpiUtGetRegionName (RegionObj->Region.SpaceId)));
    }

    if (!(HandlerDesc->AddressSpace.HandlerFlags &
        ACPI_ADDR_HANDLER_DEFAULT_INSTALLED))
    {
        /*
         * We just returned from a non-default handler, we must re-enter the
         * interpreter
         */
        AcpiExEnterInterpreter ();
    }

    return_ACPI_STATUS (Status);
}
ACPI_STATUS
AcpiInstallGpeHandler (
    ACPI_HANDLE             GpeDevice,
    UINT32                  GpeNumber,
    UINT32                  Type,
    ACPI_EVENT_HANDLER      Address,
    void                    *Context)
{
    ACPI_GPE_EVENT_INFO     *GpeEventInfo;
    ACPI_HANDLER_INFO       *Handler;
    ACPI_STATUS             Status;
    ACPI_CPU_FLAGS          Flags;


    ACPI_FUNCTION_TRACE (AcpiInstallGpeHandler);


    /* Parameter validation */

    if ((!Address) || (Type & ~ACPI_GPE_XRUPT_TYPE_MASK))
    {
        return_ACPI_STATUS (AE_BAD_PARAMETER);
    }

    Status = AcpiUtAcquireMutex (ACPI_MTX_EVENTS);
    if (ACPI_FAILURE (Status))
    {
        return_ACPI_STATUS (Status);
    }

    /* Ensure that we have a valid GPE number */

    GpeEventInfo = AcpiEvGetGpeEventInfo (GpeDevice, GpeNumber);
    if (!GpeEventInfo)
    {
        Status = AE_BAD_PARAMETER;
        goto UnlockAndExit;
    }

    /* Make sure that there isn't a handler there already */

    if ((GpeEventInfo->Flags & ACPI_GPE_DISPATCH_MASK) ==
            ACPI_GPE_DISPATCH_HANDLER)
    {
        Status = AE_ALREADY_EXISTS;
        goto UnlockAndExit;
    }

    /* Allocate and init handler object */

    Handler = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_HANDLER_INFO));
    if (!Handler)
    {
        Status = AE_NO_MEMORY;
        goto UnlockAndExit;
    }

    Handler->Address    = Address;
    Handler->Context    = Context;
    Handler->MethodNode = GpeEventInfo->Dispatch.MethodNode;

    /* Disable the GPE before installing the handler */

    Status = AcpiEvDisableGpe (GpeEventInfo);
    if (ACPI_FAILURE (Status))
    {
        goto UnlockAndExit;
    }

    /* Install the handler */

    Flags = AcpiOsAcquireLock (AcpiGbl_GpeLock);
    GpeEventInfo->Dispatch.Handler = Handler;

    /* Setup up dispatch flags to indicate handler (vs. method) */

    GpeEventInfo->Flags &= ~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
    GpeEventInfo->Flags |= (UINT8) (Type | ACPI_GPE_DISPATCH_HANDLER);

    AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags);


UnlockAndExit:
    (void) AcpiUtReleaseMutex (ACPI_MTX_EVENTS);
    return_ACPI_STATUS (Status);
}
示例#7
0
static ACPI_STATUS
AcpiHwValidateIoRequest (
    ACPI_IO_ADDRESS         Address,
    UINT32                  BitWidth)
{
    UINT32                  i;
    UINT32                  ByteWidth;
    ACPI_IO_ADDRESS         LastAddress;
    const ACPI_PORT_INFO    *PortInfo;


    ACPI_FUNCTION_NAME (HwValidateIoRequest);


    /* Supported widths are 8/16/32 */

    if ((BitWidth != 8) &&
        (BitWidth != 16) &&
        (BitWidth != 32))
    {
        ACPI_ERROR ((AE_INFO,
            "Bad BitWidth parameter: %8.8X", BitWidth));
        return (AE_BAD_PARAMETER);
    }

    PortInfo = AcpiProtectedPorts;
    ByteWidth = ACPI_DIV_8 (BitWidth);
    LastAddress = Address + ByteWidth - 1;

    ACPI_DEBUG_PRINT ((ACPI_DB_IO, "Address %8.8X%8.8X LastAddress %8.8X%8.8X Length %X",
        ACPI_FORMAT_UINT64 (Address), ACPI_FORMAT_UINT64 (LastAddress),
        ByteWidth));

    /* Maximum 16-bit address in I/O space */

    if (LastAddress > ACPI_UINT16_MAX)
    {
        ACPI_ERROR ((AE_INFO,
            "Illegal I/O port address/length above 64K: %8.8X%8.8X/0x%X",
            ACPI_FORMAT_UINT64 (Address), ByteWidth));
        return (AE_LIMIT);
    }

    /* Exit if requested address is not within the protected port table */

    if (Address > AcpiProtectedPorts[ACPI_PORT_INFO_ENTRIES - 1].End)
    {
        return (AE_OK);
    }

    /* Check request against the list of protected I/O ports */

    for (i = 0; i < ACPI_PORT_INFO_ENTRIES; i++, PortInfo++)
    {
        /*
         * Check if the requested address range will write to a reserved
         * port. There are four cases to consider:
         *
         * 1) Address range is contained completely in the port address range
         * 2) Address range overlaps port range at the port range start
         * 3) Address range overlaps port range at the port range end
         * 4) Address range completely encompasses the port range
         */
        if ((Address <= PortInfo->End) && (LastAddress >= PortInfo->Start))
        {
            /* Port illegality may depend on the _OSI calls made by the BIOS */

            if (AcpiGbl_OsiData >= PortInfo->OsiDependency)
            {
                ACPI_DEBUG_PRINT ((ACPI_DB_IO,
                    "Denied AML access to port 0x%8.8X%8.8X/%X (%s 0x%.4X-0x%.4X)",
                    ACPI_FORMAT_UINT64 (Address), ByteWidth, PortInfo->Name,
                    PortInfo->Start, PortInfo->End));

                return_ACPI_STATUS (AE_AML_ILLEGAL_ADDRESS);
            }
        }

        /* Finished if address range ends before the end of this port */

        if (LastAddress <= PortInfo->End)
        {
            break;
        }
    }

    return (AE_OK);
}
示例#8
0
ACPI_STATUS
AcpiDsCallControlMethod (
    ACPI_THREAD_STATE       *Thread,
    ACPI_WALK_STATE         *ThisWalkState,
    ACPI_PARSE_OBJECT       *Op)
{
    ACPI_STATUS             Status;
    ACPI_NAMESPACE_NODE     *MethodNode;
    ACPI_WALK_STATE         *NextWalkState = NULL;
    ACPI_OPERAND_OBJECT     *ObjDesc;
    ACPI_EVALUATE_INFO      *Info;
    UINT32                  i;


    ACPI_FUNCTION_TRACE_PTR (DsCallControlMethod, ThisWalkState);

    ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Calling method %p, currentstate=%p\n",
        ThisWalkState->PrevOp, ThisWalkState));

    /*
     * Get the namespace entry for the control method we are about to call
     */
    MethodNode = ThisWalkState->MethodCallNode;
    if (!MethodNode)
    {
        return_ACPI_STATUS (AE_NULL_ENTRY);
    }

    ObjDesc = AcpiNsGetAttachedObject (MethodNode);
    if (!ObjDesc)
    {
        return_ACPI_STATUS (AE_NULL_OBJECT);
    }

    /* Init for new method, possibly wait on method mutex */

    Status = AcpiDsBeginMethodExecution (MethodNode, ObjDesc,
                ThisWalkState);
    if (ACPI_FAILURE (Status))
    {
        return_ACPI_STATUS (Status);
    }

    /* Begin method parse/execution. Create a new walk state */

    NextWalkState = AcpiDsCreateWalkState (ObjDesc->Method.OwnerId,
                        NULL, ObjDesc, Thread);
    if (!NextWalkState)
    {
        Status = AE_NO_MEMORY;
        goto Cleanup;
    }

    /*
     * The resolved arguments were put on the previous walk state's operand
     * stack. Operands on the previous walk state stack always
     * start at index 0. Also, null terminate the list of arguments
     */
    ThisWalkState->Operands [ThisWalkState->NumOperands] = NULL;

    /*
     * Allocate and initialize the evaluation information block
     * TBD: this is somewhat inefficient, should change interface to
     * DsInitAmlWalk. For now, keeps this struct off the CPU stack
     */
    Info = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_EVALUATE_INFO));
    if (!Info)
    {
        Status = AE_NO_MEMORY;
        goto Cleanup;
    }

    Info->Parameters = &ThisWalkState->Operands[0];

    Status = AcpiDsInitAmlWalk (NextWalkState, NULL, MethodNode,
                ObjDesc->Method.AmlStart, ObjDesc->Method.AmlLength,
                Info, ACPI_IMODE_EXECUTE);

    ACPI_FREE (Info);
    if (ACPI_FAILURE (Status))
    {
        goto Cleanup;
    }

    /*
     * Delete the operands on the previous walkstate operand stack
     * (they were copied to new objects)
     */
    for (i = 0; i < ObjDesc->Method.ParamCount; i++)
    {
        AcpiUtRemoveReference (ThisWalkState->Operands [i]);
        ThisWalkState->Operands [i] = NULL;
    }

    /* Clear the operand stack */

    ThisWalkState->NumOperands = 0;

    ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
        "**** Begin nested execution of [%4.4s] **** WalkState=%p\n",
        MethodNode->Name.Ascii, NextWalkState));

    /* Invoke an internal method if necessary */

    if (ObjDesc->Method.InfoFlags & ACPI_METHOD_INTERNAL_ONLY)
    {
        Status = ObjDesc->Method.Dispatch.Implementation (NextWalkState);
        if (Status == AE_OK)
        {
            Status = AE_CTRL_TERMINATE;
        }
    }

    return_ACPI_STATUS (Status);


Cleanup:

    /* On error, we must terminate the method properly */

    AcpiDsTerminateControlMethod (ObjDesc, NextWalkState);
    if (NextWalkState)
    {
        AcpiDsDeleteWalkState (NextWalkState);
    }

    return_ACPI_STATUS (Status);
}
示例#9
0
ACPI_STATUS
AcpiDsRestartControlMethod (
    ACPI_WALK_STATE         *WalkState,
    ACPI_OPERAND_OBJECT     *ReturnDesc)
{
    ACPI_STATUS             Status;
    int                     SameAsImplicitReturn;


    ACPI_FUNCTION_TRACE_PTR (DsRestartControlMethod, WalkState);


    ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
        "****Restart [%4.4s] Op %p ReturnValueFromCallee %p\n",
        AcpiUtGetNodeName (WalkState->MethodNode),
        WalkState->MethodCallOp, ReturnDesc));

    ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
        "    ReturnFromThisMethodUsed?=%X ResStack %p Walk %p\n",
        WalkState->ReturnUsed,
        WalkState->Results, WalkState));

    /* Did the called method return a value? */

    if (ReturnDesc)
    {
        /* Is the implicit return object the same as the return desc? */

        SameAsImplicitReturn = (WalkState->ImplicitReturnObj == ReturnDesc);

        /* Are we actually going to use the return value? */

        if (WalkState->ReturnUsed)
        {
            /* Save the return value from the previous method */

            Status = AcpiDsResultPush (ReturnDesc, WalkState);
            if (ACPI_FAILURE (Status))
            {
                AcpiUtRemoveReference (ReturnDesc);
                return_ACPI_STATUS (Status);
            }

            /*
             * Save as THIS method's return value in case it is returned
             * immediately to yet another method
             */
            WalkState->ReturnDesc = ReturnDesc;
        }

        /*
         * The following code is the optional support for the so-called
         * "implicit return". Some AML code assumes that the last value of the
         * method is "implicitly" returned to the caller, in the absence of an
         * explicit return value.
         *
         * Just save the last result of the method as the return value.
         *
         * NOTE: this is optional because the ASL language does not actually
         * support this behavior.
         */
        else if (!AcpiDsDoImplicitReturn (ReturnDesc, WalkState, FALSE) ||
                 SameAsImplicitReturn)
        {
            /*
             * Delete the return value if it will not be used by the
             * calling method or remove one reference if the explicit return
             * is the same as the implicit return value.
             */
            AcpiUtRemoveReference (ReturnDesc);
        }
    }

    return_ACPI_STATUS (AE_OK);
}
示例#10
0
文件: psxface.c 项目: 0-T-0/ps4-linux
acpi_status acpi_ps_execute_method(struct acpi_evaluate_info * info)
{
	acpi_status status;
	union acpi_parse_object *op;
	struct acpi_walk_state *walk_state;

	ACPI_FUNCTION_TRACE(ps_execute_method);

	/* Quick validation of DSDT header */

	acpi_tb_check_dsdt_header();

	/* Validate the Info and method Node */

	if (!info || !info->node) {
		return_ACPI_STATUS(AE_NULL_ENTRY);
	}

	/* Init for new method, wait on concurrency semaphore */

	status =
	    acpi_ds_begin_method_execution(info->node, info->obj_desc, NULL);
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	/*
	 * The caller "owns" the parameters, so give each one an extra reference
	 */
	acpi_ps_update_parameter_list(info, REF_INCREMENT);

	/*
	 * Execute the method. Performs parse simultaneously
	 */
	ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
			  "**** Begin Method Parse/Execute [%4.4s] **** Node=%p Obj=%p\n",
			  info->node->name.ascii, info->node, info->obj_desc));

	/* Create and init a Root Node */

	op = acpi_ps_create_scope_op(info->obj_desc->method.aml_start);
	if (!op) {
		status = AE_NO_MEMORY;
		goto cleanup;
	}

	/* Create and initialize a new walk state */

	info->pass_number = ACPI_IMODE_EXECUTE;
	walk_state =
	    acpi_ds_create_walk_state(info->obj_desc->method.owner_id, NULL,
				      NULL, NULL);
	if (!walk_state) {
		status = AE_NO_MEMORY;
		goto cleanup;
	}

	status = acpi_ds_init_aml_walk(walk_state, op, info->node,
				       info->obj_desc->method.aml_start,
				       info->obj_desc->method.aml_length, info,
				       info->pass_number);
	if (ACPI_FAILURE(status)) {
		acpi_ds_delete_walk_state(walk_state);
		goto cleanup;
	}

	if (info->obj_desc->method.info_flags & ACPI_METHOD_MODULE_LEVEL) {
		walk_state->parse_flags |= ACPI_PARSE_MODULE_LEVEL;
	}

	/* Invoke an internal method if necessary */

	if (info->obj_desc->method.info_flags & ACPI_METHOD_INTERNAL_ONLY) {
		status =
		    info->obj_desc->method.dispatch.implementation(walk_state);
		info->return_object = walk_state->return_desc;

		/* Cleanup states */

		acpi_ds_scope_stack_clear(walk_state);
		acpi_ps_cleanup_scope(&walk_state->parser_state);
		acpi_ds_terminate_control_method(walk_state->method_desc,
						 walk_state);
		acpi_ds_delete_walk_state(walk_state);
		goto cleanup;
	}

	/*
	 * Start method evaluation with an implicit return of zero.
	 * This is done for Windows compatibility.
	 */
	if (acpi_gbl_enable_interpreter_slack) {
		walk_state->implicit_return_obj =
		    acpi_ut_create_integer_object((u64) 0);
		if (!walk_state->implicit_return_obj) {
			status = AE_NO_MEMORY;
			acpi_ds_delete_walk_state(walk_state);
			goto cleanup;
		}
	}

	/* Parse the AML */

	status = acpi_ps_parse_aml(walk_state);

	/* walk_state was deleted by parse_aml */

cleanup:
	acpi_ps_delete_parse_tree(op);

	/* Take away the extra reference that we gave the parameters above */

	acpi_ps_update_parameter_list(info, REF_DECREMENT);

	/* Exit now if error above */

	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	/*
	 * If the method has returned an object, signal this to the caller with
	 * a control exception code
	 */
	if (info->return_object) {
		ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "Method returned ObjDesc=%p\n",
				  info->return_object));
		ACPI_DUMP_STACK_ENTRY(info->return_object);

		status = AE_CTRL_RETURN_VALUE;
	}

	return_ACPI_STATUS(status);
}
示例#11
0
ACPI_STATUS
AcpiDsBeginMethodExecution (
    ACPI_NAMESPACE_NODE     *MethodNode,
    ACPI_OPERAND_OBJECT     *ObjDesc,
    ACPI_WALK_STATE         *WalkState)
{
    ACPI_STATUS             Status = AE_OK;


    ACPI_FUNCTION_TRACE_PTR (DsBeginMethodExecution, MethodNode);


    if (!MethodNode)
    {
        return_ACPI_STATUS (AE_NULL_ENTRY);
    }

    /* Prevent wraparound of thread count */

    if (ObjDesc->Method.ThreadCount == ACPI_UINT8_MAX)
    {
        ACPI_ERROR ((AE_INFO,
            "Method reached maximum reentrancy limit (255)"));
        return_ACPI_STATUS (AE_AML_METHOD_LIMIT);
    }

    /*
     * If this method is serialized, we need to acquire the method mutex.
     */
    if (ObjDesc->Method.InfoFlags & ACPI_METHOD_SERIALIZED)
    {
        /*
         * Create a mutex for the method if it is defined to be Serialized
         * and a mutex has not already been created. We defer the mutex creation
         * until a method is actually executed, to minimize the object count
         */
        if (!ObjDesc->Method.Mutex)
        {
            Status = AcpiDsCreateMethodMutex (ObjDesc);
            if (ACPI_FAILURE (Status))
            {
                return_ACPI_STATUS (Status);
            }
        }

        /*
         * The CurrentSyncLevel (per-thread) must be less than or equal to
         * the sync level of the method. This mechanism provides some
         * deadlock prevention
         *
         * Top-level method invocation has no walk state at this point
         */
        if (WalkState &&
            (WalkState->Thread->CurrentSyncLevel > ObjDesc->Method.Mutex->Mutex.SyncLevel))
        {
            ACPI_ERROR ((AE_INFO,
                "Cannot acquire Mutex for method [%4.4s], current SyncLevel is too large (%u)",
                AcpiUtGetNodeName (MethodNode),
                WalkState->Thread->CurrentSyncLevel));

            return_ACPI_STATUS (AE_AML_MUTEX_ORDER);
        }

        /*
         * Obtain the method mutex if necessary. Do not acquire mutex for a
         * recursive call.
         */
        if (!WalkState ||
            !ObjDesc->Method.Mutex->Mutex.ThreadId ||
            (WalkState->Thread->ThreadId != ObjDesc->Method.Mutex->Mutex.ThreadId))
        {
            /*
             * Acquire the method mutex. This releases the interpreter if we
             * block (and reacquires it before it returns)
             */
            Status = AcpiExSystemWaitMutex (ObjDesc->Method.Mutex->Mutex.OsMutex,
                        ACPI_WAIT_FOREVER);
            if (ACPI_FAILURE (Status))
            {
                return_ACPI_STATUS (Status);
            }

            /* Update the mutex and walk info and save the original SyncLevel */

            if (WalkState)
            {
                ObjDesc->Method.Mutex->Mutex.OriginalSyncLevel =
                    WalkState->Thread->CurrentSyncLevel;

                ObjDesc->Method.Mutex->Mutex.ThreadId = WalkState->Thread->ThreadId;
                WalkState->Thread->CurrentSyncLevel = ObjDesc->Method.SyncLevel;
            }
            else
            {
                ObjDesc->Method.Mutex->Mutex.OriginalSyncLevel =
                    ObjDesc->Method.Mutex->Mutex.SyncLevel;
            }
        }

        /* Always increase acquisition depth */

        ObjDesc->Method.Mutex->Mutex.AcquisitionDepth++;
    }

    /*
     * Allocate an Owner ID for this method, only if this is the first thread
     * to begin concurrent execution. We only need one OwnerId, even if the
     * method is invoked recursively.
     */
    if (!ObjDesc->Method.OwnerId)
    {
        Status = AcpiUtAllocateOwnerId (&ObjDesc->Method.OwnerId);
        if (ACPI_FAILURE (Status))
        {
            goto Cleanup;
        }
    }

    /*
     * Increment the method parse tree thread count since it has been
     * reentered one more time (even if it is the same thread)
     */
    ObjDesc->Method.ThreadCount++;
    AcpiMethodCount++;
    return_ACPI_STATUS (Status);


Cleanup:
    /* On error, must release the method mutex (if present) */

    if (ObjDesc->Method.Mutex)
    {
        AcpiOsReleaseMutex (ObjDesc->Method.Mutex->Mutex.OsMutex);
    }
    return_ACPI_STATUS (Status);
}
示例#12
0
文件: nswalk.c 项目: AmirAbrams/haiku
ACPI_STATUS
AcpiNsWalkNamespace (
    ACPI_OBJECT_TYPE        Type,
    ACPI_HANDLE             StartNode,
    UINT32                  MaxDepth,
    UINT32                  Flags,
    ACPI_WALK_CALLBACK      DescendingCallback,
    ACPI_WALK_CALLBACK      AscendingCallback,
    void                    *Context,
    void                    **ReturnValue)
{
    ACPI_STATUS             Status;
    ACPI_STATUS             MutexStatus;
    ACPI_NAMESPACE_NODE     *ChildNode;
    ACPI_NAMESPACE_NODE     *ParentNode;
    ACPI_OBJECT_TYPE        ChildType;
    UINT32                  Level;
    BOOLEAN                 NodePreviouslyVisited = FALSE;


    ACPI_FUNCTION_TRACE (NsWalkNamespace);


    /* Special case for the namespace Root Node */

    if (StartNode == ACPI_ROOT_OBJECT)
    {
        StartNode = AcpiGbl_RootNode;
    }

    /* Null child means "get first node" */

    ParentNode = StartNode;
    ChildNode = AcpiNsGetNextNode (ParentNode, NULL);
    ChildType = ACPI_TYPE_ANY;
    Level = 1;

    /*
     * Traverse the tree of nodes until we bubble back up to where we
     * started. When Level is zero, the loop is done because we have
     * bubbled up to (and passed) the original parent handle (StartEntry)
     */
    while (Level > 0 && ChildNode)
    {
        Status = AE_OK;

        /* Found next child, get the type if we are not searching for ANY */

        if (Type != ACPI_TYPE_ANY)
        {
            ChildType = ChildNode->Type;
        }

        /*
         * Ignore all temporary namespace nodes (created during control
         * method execution) unless told otherwise. These temporary nodes
         * can cause a race condition because they can be deleted during
         * the execution of the user function (if the namespace is
         * unlocked before invocation of the user function.) Only the
         * debugger namespace dump will examine the temporary nodes.
         */
        if ((ChildNode->Flags & ANOBJ_TEMPORARY) &&
            !(Flags & ACPI_NS_WALK_TEMP_NODES))
        {
            Status = AE_CTRL_DEPTH;
        }

        /* Type must match requested type */

        else if (ChildType == Type)
        {
            /*
             * Found a matching node, invoke the user callback function.
             * Unlock the namespace if flag is set.
             */
            if (Flags & ACPI_NS_WALK_UNLOCK)
            {
                MutexStatus = AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE);
                if (ACPI_FAILURE (MutexStatus))
                {
                    return_ACPI_STATUS (MutexStatus);
                }
            }

            /*
             * Invoke the user function, either descending, ascending,
             * or both.
             */
            if (!NodePreviouslyVisited)
            {
                if (DescendingCallback)
                {
                    Status = DescendingCallback (ChildNode, Level,
                        Context, ReturnValue);
                }
            }
            else
            {
                if (AscendingCallback)
                {
                    Status = AscendingCallback (ChildNode, Level,
                        Context, ReturnValue);
                }
            }

            if (Flags & ACPI_NS_WALK_UNLOCK)
            {
                MutexStatus = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE);
                if (ACPI_FAILURE (MutexStatus))
                {
                    return_ACPI_STATUS (MutexStatus);
                }
            }

            switch (Status)
            {
            case AE_OK:
            case AE_CTRL_DEPTH:

                /* Just keep going */
                break;

            case AE_CTRL_TERMINATE:

                /* Exit now, with OK status */

                return_ACPI_STATUS (AE_OK);

            default:

                /* All others are valid exceptions */

                return_ACPI_STATUS (Status);
            }
        }

        /*
         * Depth first search: Attempt to go down another level in the
         * namespace if we are allowed to. Don't go any further if we have
         * reached the caller specified maximum depth or if the user
         * function has specified that the maximum depth has been reached.
         */
        if (!NodePreviouslyVisited &&
            (Level < MaxDepth) &&
            (Status != AE_CTRL_DEPTH))
        {
            if (ChildNode->Child)
            {
                /* There is at least one child of this node, visit it */

                Level++;
                ParentNode = ChildNode;
                ChildNode = AcpiNsGetNextNode (ParentNode, NULL);
                continue;
            }
        }

        /* No more children, re-visit this node */

        if (!NodePreviouslyVisited)
        {
            NodePreviouslyVisited = TRUE;
            continue;
        }

        /* No more children, visit peers */

        ChildNode = AcpiNsGetNextNode (ParentNode, ChildNode);
        if (ChildNode)
        {
            NodePreviouslyVisited = FALSE;
        }

        /* No peers, re-visit parent */

        else
        {
            /*
             * No more children of this node (AcpiNsGetNextNode failed), go
             * back upwards in the namespace tree to the node's parent.
             */
            Level--;
            ChildNode = ParentNode;
            ParentNode = ParentNode->Parent;

            NodePreviouslyVisited = TRUE;
        }
    }

    /* Complete walk, not terminated by user function */

    return_ACPI_STATUS (AE_OK);
}
示例#13
0
acpi_status
acpi_walk_resource_buffer(struct acpi_buffer *buffer,
			  acpi_walk_resource_callback user_function,
			  void *context)
{
	acpi_status status = AE_OK;
	struct acpi_resource *resource;
	struct acpi_resource *resource_end;

	ACPI_FUNCTION_TRACE(acpi_walk_resource_buffer);

	/* Parameter validation */

	if (!buffer || !buffer->pointer || !user_function) {
		return_ACPI_STATUS(AE_BAD_PARAMETER);
	}

	/* Buffer contains the resource list and length */

	resource = ACPI_CAST_PTR(struct acpi_resource, buffer->pointer);
	resource_end =
	    ACPI_ADD_PTR(struct acpi_resource, buffer->pointer, buffer->length);

	/* Walk the resource list until the end_tag is found (or buffer end) */

	while (resource < resource_end) {

		/* Sanity check the resource type */

		if (resource->type > ACPI_RESOURCE_TYPE_MAX) {
			status = AE_AML_INVALID_RESOURCE_TYPE;
			break;
		}

		/* Sanity check the length. It must not be zero, or we loop forever */

		if (!resource->length) {
			return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH);
		}

		/* Invoke the user function, abort on any error returned */

		status = user_function(resource, context);
		if (ACPI_FAILURE(status)) {
			if (status == AE_CTRL_TERMINATE) {

				/* This is an OK termination by the user function */

				status = AE_OK;
			}
			break;
		}

		/* end_tag indicates end-of-list */

		if (resource->type == ACPI_RESOURCE_TYPE_END_TAG) {
			break;
		}

		/* Get the next resource descriptor */

		resource = ACPI_NEXT_RESOURCE(resource);
	}

	return_ACPI_STATUS(status);
}
示例#14
0
acpi_status
acpi_ev_initialize (
	void)
{
	acpi_status             status;


	FUNCTION_TRACE ("Ev_initialize");


	/* Make sure we have ACPI tables */

	if (!acpi_gbl_DSDT) {
		ACPI_DEBUG_PRINT ((ACPI_DB_WARN, "No ACPI tables present!\n"));
		return_ACPI_STATUS (AE_NO_ACPI_TABLES);
	}


	/* Make sure the BIOS supports ACPI mode */

	if (SYS_MODE_LEGACY == acpi_hw_get_mode_capabilities()) {
		ACPI_DEBUG_PRINT ((ACPI_DB_WARN, "ACPI Mode is not supported!\n"));
		return_ACPI_STATUS (AE_ERROR);
	}


	acpi_gbl_original_mode = acpi_hw_get_mode();

	/*
	 * Initialize the Fixed and General Purpose Acpi_events prior. This is
	 * done prior to enabling SCIs to prevent interrupts from occuring
	 * before handers are installed.
	 */
	status = acpi_ev_fixed_event_initialize ();
	if (ACPI_FAILURE (status)) {
		ACPI_DEBUG_PRINT ((ACPI_DB_FATAL, "Unable to initialize fixed events.\n"));
		return_ACPI_STATUS (status);
	}

	status = acpi_ev_gpe_initialize ();
	if (ACPI_FAILURE (status)) {
		ACPI_DEBUG_PRINT ((ACPI_DB_FATAL, "Unable to initialize general purpose events.\n"));
		return_ACPI_STATUS (status);
	}

	/* Install the SCI handler */

	status = acpi_ev_install_sci_handler ();
	if (ACPI_FAILURE (status)) {
		ACPI_DEBUG_PRINT ((ACPI_DB_FATAL, "Unable to install System Control Interrupt Handler\n"));
		return_ACPI_STATUS (status);
	}


	/* Install handlers for control method GPE handlers (_Lxx, _Exx) */

	status = acpi_ev_init_gpe_control_methods ();
	if (ACPI_FAILURE (status)) {
		ACPI_DEBUG_PRINT ((ACPI_DB_FATAL, "Unable to initialize Gpe control methods\n"));
		return_ACPI_STATUS (status);
	}

	/* Install the handler for the Global Lock */

	status = acpi_ev_init_global_lock_handler ();
	if (ACPI_FAILURE (status)) {
		ACPI_DEBUG_PRINT ((ACPI_DB_FATAL, "Unable to initialize Global Lock handler\n"));
		return_ACPI_STATUS (status);
	}


	return_ACPI_STATUS (status);
}
示例#15
0
ACPI_STATUS
AcpiInstallNotifyHandler (
    ACPI_HANDLE             Device,
    UINT32                  HandlerType,
    ACPI_NOTIFY_HANDLER     Handler,
    void                    *Context)
{
    ACPI_OPERAND_OBJECT     *ObjDesc;
    ACPI_OPERAND_OBJECT     *NotifyObj;
    ACPI_NAMESPACE_NODE     *Node;
    ACPI_STATUS             Status;


    ACPI_FUNCTION_TRACE (AcpiInstallNotifyHandler);


    /* Parameter validation */

    if ((!Device)  ||
        (!Handler) ||
        (HandlerType > ACPI_MAX_NOTIFY_HANDLER_TYPE))
    {
        return_ACPI_STATUS (AE_BAD_PARAMETER);
    }

    Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE);
    if (ACPI_FAILURE (Status))
    {
        return_ACPI_STATUS (Status);
    }

    /* Convert and validate the device handle */

    Node = AcpiNsValidateHandle (Device);
    if (!Node)
    {
        Status = AE_BAD_PARAMETER;
        goto UnlockAndExit;
    }

    /*
     * Root Object:
     * Registering a notify handler on the root object indicates that the
     * caller wishes to receive notifications for all objects. Note that
     * only one <external> global handler can be regsitered (per notify type).
     */
    if (Device == ACPI_ROOT_OBJECT)
    {
        /* Make sure the handler is not already installed */

        if (((HandlerType & ACPI_SYSTEM_NOTIFY) &&
                AcpiGbl_SystemNotify.Handler)       ||
            ((HandlerType & ACPI_DEVICE_NOTIFY) &&
                AcpiGbl_DeviceNotify.Handler))
        {
            Status = AE_ALREADY_EXISTS;
            goto UnlockAndExit;
        }

        if (HandlerType & ACPI_SYSTEM_NOTIFY)
        {
            AcpiGbl_SystemNotify.Node    = Node;
            AcpiGbl_SystemNotify.Handler = Handler;
            AcpiGbl_SystemNotify.Context = Context;
        }

        if (HandlerType & ACPI_DEVICE_NOTIFY)
        {
            AcpiGbl_DeviceNotify.Node    = Node;
            AcpiGbl_DeviceNotify.Handler = Handler;
            AcpiGbl_DeviceNotify.Context = Context;
        }

        /* Global notify handler installed */
    }

    /*
     * All Other Objects:
     * Caller will only receive notifications specific to the target object.
     * Note that only certain object types can receive notifications.
     */
    else
    {
        /* Notifies allowed on this object? */

        if (!AcpiEvIsNotifyObject (Node))
        {
            Status = AE_TYPE;
            goto UnlockAndExit;
        }

        /* Check for an existing internal object */

        ObjDesc = AcpiNsGetAttachedObject (Node);
        if (ObjDesc)
        {
            /* Object exists - make sure there's no handler */

            if (((HandlerType & ACPI_SYSTEM_NOTIFY) &&
                    ObjDesc->CommonNotify.SystemNotify)   ||
                ((HandlerType & ACPI_DEVICE_NOTIFY) &&
                    ObjDesc->CommonNotify.DeviceNotify))
            {
                Status = AE_ALREADY_EXISTS;
                goto UnlockAndExit;
            }
        }
        else
        {
            /* Create a new object */

            ObjDesc = AcpiUtCreateInternalObject (Node->Type);
            if (!ObjDesc)
            {
                Status = AE_NO_MEMORY;
                goto UnlockAndExit;
            }

            /* Attach new object to the Node */

            Status = AcpiNsAttachObject (Device, ObjDesc, Node->Type);

            /* Remove local reference to the object */

            AcpiUtRemoveReference (ObjDesc);
            if (ACPI_FAILURE (Status))
            {
                goto UnlockAndExit;
            }
        }

        /* Install the handler */

        NotifyObj = AcpiUtCreateInternalObject (ACPI_TYPE_LOCAL_NOTIFY);
        if (!NotifyObj)
        {
            Status = AE_NO_MEMORY;
            goto UnlockAndExit;
        }

        NotifyObj->Notify.Node    = Node;
        NotifyObj->Notify.Handler = Handler;
        NotifyObj->Notify.Context = Context;

        if (HandlerType & ACPI_SYSTEM_NOTIFY)
        {
            ObjDesc->CommonNotify.SystemNotify = NotifyObj;
        }

        if (HandlerType & ACPI_DEVICE_NOTIFY)
        {
            ObjDesc->CommonNotify.DeviceNotify = NotifyObj;
        }

        if (HandlerType == ACPI_ALL_NOTIFY)
        {
            /* Extra ref if installed in both */

            AcpiUtAddReference (NotifyObj);
        }
    }


UnlockAndExit:
    (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE);
    return_ACPI_STATUS (Status);
}
示例#16
0
acpi_status
acpi_ut_walk_package_tree (
	union acpi_operand_object       *source_object,
	void                            *target_object,
	acpi_pkg_callback               walk_callback,
	void                            *context)
{
	acpi_status                     status = AE_OK;
	union acpi_generic_state        *state_list = NULL;
	union acpi_generic_state        *state;
	u32                             this_index;
	union acpi_operand_object       *this_source_obj;


	ACPI_FUNCTION_TRACE ("ut_walk_package_tree");


	state = acpi_ut_create_pkg_state (source_object, target_object, 0);
	if (!state) {
		return_ACPI_STATUS (AE_NO_MEMORY);
	}

	while (state) {
		/* Get one element of the package */

		this_index    = state->pkg.index;
		this_source_obj = (union acpi_operand_object *)
				  state->pkg.source_object->package.elements[this_index];

		/*
		 * Check for:
		 * 1) An uninitialized package element.  It is completely
		 *    legal to declare a package and leave it uninitialized
		 * 2) Not an internal object - can be a namespace node instead
		 * 3) Any type other than a package.  Packages are handled in else
		 *    case below.
		 */
		if ((!this_source_obj) ||
			(ACPI_GET_DESCRIPTOR_TYPE (this_source_obj) != ACPI_DESC_TYPE_OPERAND) ||
			(ACPI_GET_OBJECT_TYPE (this_source_obj) != ACPI_TYPE_PACKAGE)) {
			status = walk_callback (ACPI_COPY_TYPE_SIMPLE, this_source_obj,
					 state, context);
			if (ACPI_FAILURE (status)) {
				return_ACPI_STATUS (status);
			}

			state->pkg.index++;
			while (state->pkg.index >= state->pkg.source_object->package.count) {
				/*
				 * We've handled all of the objects at this level,  This means
				 * that we have just completed a package.  That package may
				 * have contained one or more packages itself.
				 *
				 * Delete this state and pop the previous state (package).
				 */
				acpi_ut_delete_generic_state (state);
				state = acpi_ut_pop_generic_state (&state_list);

				/* Finished when there are no more states */

				if (!state) {
					/*
					 * We have handled all of the objects in the top level
					 * package just add the length of the package objects
					 * and exit
					 */
					return_ACPI_STATUS (AE_OK);
				}

				/*
				 * Go back up a level and move the index past the just
				 * completed package object.
				 */
				state->pkg.index++;
			}
		}
		else {
			/* This is a subobject of type package */

			status = walk_callback (ACPI_COPY_TYPE_PACKAGE, this_source_obj,
					  state, context);
			if (ACPI_FAILURE (status)) {
				return_ACPI_STATUS (status);
			}

			/*
			 * Push the current state and create a new one
			 * The callback above returned a new target package object.
			 */
			acpi_ut_push_generic_state (&state_list, state);
			state = acpi_ut_create_pkg_state (this_source_obj,
					   state->pkg.this_target_obj, 0);
			if (!state) {
				return_ACPI_STATUS (AE_NO_MEMORY);
			}
		}
	}

	/* We should never get here */

	return_ACPI_STATUS (AE_AML_INTERNAL);
}
示例#17
0
ACPI_STATUS
AcpiRemoveNotifyHandler (
    ACPI_HANDLE             Device,
    UINT32                  HandlerType,
    ACPI_NOTIFY_HANDLER     Handler)
{
    ACPI_OPERAND_OBJECT     *NotifyObj;
    ACPI_OPERAND_OBJECT     *ObjDesc;
    ACPI_NAMESPACE_NODE     *Node;
    ACPI_STATUS             Status;


    ACPI_FUNCTION_TRACE (AcpiRemoveNotifyHandler);


    /* Parameter validation */

    if ((!Device)  ||
        (!Handler) ||
        (HandlerType > ACPI_MAX_NOTIFY_HANDLER_TYPE))
    {
        return_ACPI_STATUS (AE_BAD_PARAMETER);
    }

    Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE);
    if (ACPI_FAILURE (Status))
    {
        return_ACPI_STATUS (Status);
    }

    /* Convert and validate the device handle */

    Node = AcpiNsValidateHandle (Device);
    if (!Node)
    {
        Status = AE_BAD_PARAMETER;
        goto UnlockAndExit;
    }

    /* Root Object */

    if (Device == ACPI_ROOT_OBJECT)
    {
        ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
            "Removing notify handler for namespace root object\n"));

        if (((HandlerType & ACPI_SYSTEM_NOTIFY) &&
              !AcpiGbl_SystemNotify.Handler)        ||
            ((HandlerType & ACPI_DEVICE_NOTIFY) &&
              !AcpiGbl_DeviceNotify.Handler))
        {
            Status = AE_NOT_EXIST;
            goto UnlockAndExit;
        }

        if (HandlerType & ACPI_SYSTEM_NOTIFY)
        {
            AcpiGbl_SystemNotify.Node    = NULL;
            AcpiGbl_SystemNotify.Handler = NULL;
            AcpiGbl_SystemNotify.Context = NULL;
        }

        if (HandlerType & ACPI_DEVICE_NOTIFY)
        {
            AcpiGbl_DeviceNotify.Node    = NULL;
            AcpiGbl_DeviceNotify.Handler = NULL;
            AcpiGbl_DeviceNotify.Context = NULL;
        }
    }

    /* All Other Objects */

    else
    {
        /* Notifies allowed on this object? */

        if (!AcpiEvIsNotifyObject (Node))
        {
            Status = AE_TYPE;
            goto UnlockAndExit;
        }

        /* Check for an existing internal object */

        ObjDesc = AcpiNsGetAttachedObject (Node);
        if (!ObjDesc)
        {
            Status = AE_NOT_EXIST;
            goto UnlockAndExit;
        }

        /* Object exists - make sure there's an existing handler */

        if (HandlerType & ACPI_SYSTEM_NOTIFY)
        {
            NotifyObj = ObjDesc->CommonNotify.SystemNotify;
            if (!NotifyObj)
            {
                Status = AE_NOT_EXIST;
                goto UnlockAndExit;
            }

            if (NotifyObj->Notify.Handler != Handler)
            {
                Status = AE_BAD_PARAMETER;
                goto UnlockAndExit;
            }

            /* Remove the handler */

            ObjDesc->CommonNotify.SystemNotify = NULL;
            AcpiUtRemoveReference (NotifyObj);
        }

        if (HandlerType & ACPI_DEVICE_NOTIFY)
        {
            NotifyObj = ObjDesc->CommonNotify.DeviceNotify;
            if (!NotifyObj)
            {
                Status = AE_NOT_EXIST;
                goto UnlockAndExit;
            }

            if (NotifyObj->Notify.Handler != Handler)
            {
                Status = AE_BAD_PARAMETER;
                goto UnlockAndExit;
            }

            /* Remove the handler */

            ObjDesc->CommonNotify.DeviceNotify = NULL;
            AcpiUtRemoveReference (NotifyObj);
        }
    }


UnlockAndExit:
    (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE);
    return_ACPI_STATUS (Status);
}
示例#18
0
acpi_status
acpi_ut_strtoul64 (
	char                            *string,
	u32                             base,
	acpi_integer                    *ret_integer)
{
	u32                             this_digit;
	acpi_integer                    return_value = 0;
	acpi_integer                    quotient;


	ACPI_FUNCTION_TRACE ("ut_stroul64");


	switch (base) {
	case ACPI_ANY_BASE:
	case 10:
	case 16:
		break;

	default:
		/* Invalid Base */
		return_ACPI_STATUS (AE_BAD_PARAMETER);
	}

	/* Skip over any white space in the buffer */

	while (ACPI_IS_SPACE (*string) || *string == '\t') {
		++string;
	}

	/*
	 * If the input parameter Base is zero, then we need to
	 * determine if it is decimal or hexadecimal:
	 */
	if (base == 0) {
		if ((*string == '0') &&
			(ACPI_TOLOWER (*(++string)) == 'x')) {
			base = 16;
			++string;
		}
		else {
			base = 10;
		}
	}

	/*
	 * For hexadecimal base, skip over the leading
	 * 0 or 0x, if they are present.
	 */
	if (base == 16 &&
		*string == '0' &&
		ACPI_TOLOWER (*(++string)) == 'x') {
		string++;
	}

	/* Any string left? */

	if (!(*string)) {
		goto error_exit;
	}

	/* Main loop: convert the string to a 64-bit integer */

	while (*string) {
		if (ACPI_IS_DIGIT (*string)) {
			/* Convert ASCII 0-9 to Decimal value */

			this_digit = ((u8) *string) - '0';
		}
		else {
			this_digit = (u8) ACPI_TOUPPER (*string);
			if (ACPI_IS_UPPER ((char) this_digit)) {
				/* Convert ASCII Hex char to value */

				this_digit = this_digit - 'A' + 10;
			}
			else {
				goto error_exit;
			}
		}

		/* Check to see if digit is out of range */

		if (this_digit >= base) {
			goto error_exit;
		}

		/* Divide the digit into the correct position */

		(void) acpi_ut_short_divide ((ACPI_INTEGER_MAX - (acpi_integer) this_digit),
				 base, &quotient, NULL);
		if (return_value > quotient) {
			goto error_exit;
		}

		return_value *= base;
		return_value += this_digit;
		++string;
	}

	*ret_integer = return_value;
	return_ACPI_STATUS (AE_OK);


error_exit:
	/* Base was set/validated above */

	if (base == 10) {
		return_ACPI_STATUS (AE_BAD_DECIMAL_CONSTANT);
	}
	else {
		return_ACPI_STATUS (AE_BAD_HEX_CONSTANT);
	}
}
示例#19
0
ACPI_STATUS
AcpiRemoveGpeHandler (
    ACPI_HANDLE             GpeDevice,
    UINT32                  GpeNumber,
    ACPI_EVENT_HANDLER      Address)
{
    ACPI_GPE_EVENT_INFO     *GpeEventInfo;
    ACPI_HANDLER_INFO       *Handler;
    ACPI_STATUS             Status;
    ACPI_CPU_FLAGS          Flags;


    ACPI_FUNCTION_TRACE (AcpiRemoveGpeHandler);


    /* Parameter validation */

    if (!Address)
    {
        return_ACPI_STATUS (AE_BAD_PARAMETER);
    }

    Status = AcpiUtAcquireMutex (ACPI_MTX_EVENTS);
    if (ACPI_FAILURE (Status))
    {
        return_ACPI_STATUS (Status);
    }

    /* Ensure that we have a valid GPE number */

    GpeEventInfo = AcpiEvGetGpeEventInfo (GpeDevice, GpeNumber);
    if (!GpeEventInfo)
    {
        Status = AE_BAD_PARAMETER;
        goto UnlockAndExit;
    }

    /* Make sure that a handler is indeed installed */

    if ((GpeEventInfo->Flags & ACPI_GPE_DISPATCH_MASK) !=
            ACPI_GPE_DISPATCH_HANDLER)
    {
        Status = AE_NOT_EXIST;
        goto UnlockAndExit;
    }

    /* Make sure that the installed handler is the same */

    if (GpeEventInfo->Dispatch.Handler->Address != Address)
    {
        Status = AE_BAD_PARAMETER;
        goto UnlockAndExit;
    }

    /* Disable the GPE before removing the handler */

    Status = AcpiEvDisableGpe (GpeEventInfo);
    if (ACPI_FAILURE (Status))
    {
        goto UnlockAndExit;
    }

    /* Remove the handler */

    Flags = AcpiOsAcquireLock (AcpiGbl_GpeLock);
    Handler = GpeEventInfo->Dispatch.Handler;

    /* Restore Method node (if any), set dispatch flags */

    GpeEventInfo->Dispatch.MethodNode = Handler->MethodNode;
    GpeEventInfo->Flags &= ~ACPI_GPE_DISPATCH_MASK;  /* Clear bits */
    if (Handler->MethodNode)
    {
        GpeEventInfo->Flags |= ACPI_GPE_DISPATCH_METHOD;
    }
    AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags);

    /* Now we can free the handler object */

    ACPI_FREE (Handler);


UnlockAndExit:
    (void) AcpiUtReleaseMutex (ACPI_MTX_EVENTS);
    return_ACPI_STATUS (Status);
}
示例#20
0
ACPI_STATUS
AcpiDsInitAmlWalk (
    ACPI_WALK_STATE         *WalkState,
    ACPI_PARSE_OBJECT       *Op,
    ACPI_NAMESPACE_NODE     *MethodNode,
    UINT8                   *AmlStart,
    UINT32                  AmlLength,
    ACPI_EVALUATE_INFO      *Info,
    UINT8                   PassNumber)
{
    ACPI_STATUS             Status;
    ACPI_PARSE_STATE        *ParserState = &WalkState->ParserState;
    ACPI_PARSE_OBJECT       *ExtraOp;


    ACPI_FUNCTION_TRACE (DsInitAmlWalk);


    WalkState->ParserState.Aml =
    WalkState->ParserState.AmlStart = AmlStart;
    WalkState->ParserState.AmlEnd =
    WalkState->ParserState.PkgEnd = AmlStart + AmlLength;

    /* The NextOp of the NextWalk will be the beginning of the method */

    WalkState->NextOp = NULL;
    WalkState->PassNumber = PassNumber;

    if (Info)
    {
        WalkState->Params = Info->Parameters;
        WalkState->CallerReturnDesc = &Info->ReturnObject;
    }

    Status = AcpiPsInitScope (&WalkState->ParserState, Op);
    if (ACPI_FAILURE (Status))
    {
        return_ACPI_STATUS (Status);
    }

    if (MethodNode)
    {
        WalkState->ParserState.StartNode = MethodNode;
        WalkState->WalkType = ACPI_WALK_METHOD;
        WalkState->MethodNode = MethodNode;
        WalkState->MethodDesc = AcpiNsGetAttachedObject (MethodNode);

        /* Push start scope on scope stack and make it current  */

        Status = AcpiDsScopeStackPush (MethodNode, ACPI_TYPE_METHOD, WalkState);
        if (ACPI_FAILURE (Status))
        {
            return_ACPI_STATUS (Status);
        }

        /* Init the method arguments */

        Status = AcpiDsMethodDataInitArgs (WalkState->Params,
                    ACPI_METHOD_NUM_ARGS, WalkState);
        if (ACPI_FAILURE (Status))
        {
            return_ACPI_STATUS (Status);
        }
    }
    else
    {
        /*
         * Setup the current scope.
         * Find a Named Op that has a namespace node associated with it.
         * search upwards from this Op. Current scope is the first
         * Op with a namespace node.
         */
        ExtraOp = ParserState->StartOp;
        while (ExtraOp && !ExtraOp->Common.Node)
        {
            ExtraOp = ExtraOp->Common.Parent;
        }

        if (!ExtraOp)
        {
            ParserState->StartNode = NULL;
        }
        else
        {
            ParserState->StartNode = ExtraOp->Common.Node;
        }

        if (ParserState->StartNode)
        {
            /* Push start scope on scope stack and make it current  */

            Status = AcpiDsScopeStackPush (ParserState->StartNode,
                            ParserState->StartNode->Type, WalkState);
            if (ACPI_FAILURE (Status))
            {
                return_ACPI_STATUS (Status);
            }
        }
    }

    Status = AcpiDsInitCallbacks (WalkState, PassNumber);
    return_ACPI_STATUS (Status);
}
示例#21
0
acpi_status
acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object,
				 struct acpi_buffer *output_buffer)
{
	u8 *buffer;
	union acpi_operand_object **top_object_list;
	union acpi_operand_object **sub_object_list;
	union acpi_operand_object *obj_desc;
	acpi_size buffer_size_needed = 0;
	u32 number_of_elements;
	u32 index;
	struct acpi_pci_routing_table *user_prt;
	struct acpi_namespace_node *node;
	acpi_status status;
	struct acpi_buffer path_buffer;

	ACPI_FUNCTION_TRACE(rs_create_pci_routing_table);

	/* Params already validated, so we don't re-validate here */

	/* Get the required buffer length */

	status = acpi_rs_get_pci_routing_table_length(package_object,
						      &buffer_size_needed);
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "BufferSizeNeeded = %X\n",
			  (u32) buffer_size_needed));

	/* Validate/Allocate/Clear caller buffer */

	status = acpi_ut_initialize_buffer(output_buffer, buffer_size_needed);
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	/*
	 * Loop through the ACPI_INTERNAL_OBJECTS - Each object
	 * should be a package that in turn contains an
	 * acpi_integer Address, a u8 Pin, a Name and a u8 source_index.
	 */
	top_object_list = package_object->package.elements;
	number_of_elements = package_object->package.count;
	buffer = output_buffer->pointer;
	user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer);

	for (index = 0; index < number_of_elements; index++) {
		/*
		 * Point user_prt past this current structure
		 *
		 * NOTE: On the first iteration, user_prt->Length will
		 * be zero because we cleared the return buffer earlier
		 */
		buffer += user_prt->length;
		user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer);

		/*
		 * Fill in the Length field with the information we have at this point.
		 * The minus four is to subtract the size of the u8 Source[4] member
		 * because it is added below.
		 */
		user_prt->length = (sizeof(struct acpi_pci_routing_table) - 4);

		/* Each element of the top-level package must also be a package */

		if (ACPI_GET_OBJECT_TYPE(*top_object_list) != ACPI_TYPE_PACKAGE) {
			ACPI_ERROR((AE_INFO,
				    "(PRT[%X]) Need sub-package, found %s",
				    index,
				    acpi_ut_get_object_type_name
				    (*top_object_list)));
			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
		}

		/* Each sub-package must be of length 4 */

		if ((*top_object_list)->package.count != 4) {
			ACPI_ERROR((AE_INFO,
				    "(PRT[%X]) Need package of length 4, found length %d",
				    index, (*top_object_list)->package.count));
			return_ACPI_STATUS(AE_AML_PACKAGE_LIMIT);
		}

		/*
		 * Dereference the sub-package.
		 * The sub_object_list will now point to an array of the four IRQ
		 * elements: [Address, Pin, Source, source_index]
		 */
		sub_object_list = (*top_object_list)->package.elements;

		/* 1) First subobject: Dereference the PRT.Address */

		obj_desc = sub_object_list[0];
		if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
			user_prt->address = obj_desc->integer.value;
		} else {
			ACPI_ERROR((AE_INFO,
				    "(PRT[%X].Address) Need Integer, found %s",
				    index,
				    acpi_ut_get_object_type_name(obj_desc)));
			return_ACPI_STATUS(AE_BAD_DATA);
		}

		/* 2) Second subobject: Dereference the PRT.Pin */

		obj_desc = sub_object_list[1];
		if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
			user_prt->pin = (u32) obj_desc->integer.value;
		} else {
			ACPI_ERROR((AE_INFO,
				    "(PRT[%X].Pin) Need Integer, found %s",
				    index,
				    acpi_ut_get_object_type_name(obj_desc)));
			return_ACPI_STATUS(AE_BAD_DATA);
		}

		/*
		 * 3) Third subobject: Dereference the PRT.source_name
		 * The name may be unresolved (slack mode), so allow a null object
		 */
		obj_desc = sub_object_list[2];
		if (obj_desc) {
			switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
			case ACPI_TYPE_LOCAL_REFERENCE:

				if (obj_desc->reference.opcode !=
				    AML_INT_NAMEPATH_OP) {
					ACPI_ERROR((AE_INFO,
						    "(PRT[%X].Source) Need name, found reference op %X",
						    index,
						    obj_desc->reference.
						    opcode));
					return_ACPI_STATUS(AE_BAD_DATA);
				}

				node = obj_desc->reference.node;

				/* Use *remaining* length of the buffer as max for pathname */

				path_buffer.length = output_buffer->length -
				    (u32) ((u8 *) user_prt->source -
					   (u8 *) output_buffer->pointer);
				path_buffer.pointer = user_prt->source;

				status =
				    acpi_ns_handle_to_pathname((acpi_handle)
							       node,
							       &path_buffer);

				/* +1 to include null terminator */

				user_prt->length +=
				    (u32) ACPI_STRLEN(user_prt->source) + 1;
				break;

			case ACPI_TYPE_STRING:

				ACPI_STRCPY(user_prt->source,
					    obj_desc->string.pointer);

				/*
				 * Add to the Length field the length of the string
				 * (add 1 for terminator)
				 */
				user_prt->length += obj_desc->string.length + 1;
				break;

			case ACPI_TYPE_INTEGER:
				/*
				 * If this is a number, then the Source Name is NULL, since the
				 * entire buffer was zeroed out, we can leave this alone.
				 *
				 * Add to the Length field the length of the u32 NULL
				 */
				user_prt->length += sizeof(u32);
				break;

			default:

				ACPI_ERROR((AE_INFO,
					    "(PRT[%X].Source) Need Ref/String/Integer, found %s",
					    index,
					    acpi_ut_get_object_type_name
					    (obj_desc)));
				return_ACPI_STATUS(AE_BAD_DATA);
			}
		}

		/* Now align the current length */

		user_prt->length =
		    (u32) ACPI_ROUND_UP_TO_64BIT(user_prt->length);

		/* 4) Fourth subobject: Dereference the PRT.source_index */

		obj_desc = sub_object_list[3];
		if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
			user_prt->source_index = (u32) obj_desc->integer.value;
		} else {
			ACPI_ERROR((AE_INFO,
				    "(PRT[%X].SourceIndex) Need Integer, found %s",
				    index,
				    acpi_ut_get_object_type_name(obj_desc)));
			return_ACPI_STATUS(AE_BAD_DATA);
		}

		/* Point to the next union acpi_operand_object in the top level package */

		top_object_list++;
	}

	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "OutputBuffer %p Length %X\n",
			  output_buffer->pointer, (u32) output_buffer->length));
	return_ACPI_STATUS(AE_OK);
}
示例#22
0
/*******************************************************************************
 *
 * FUNCTION:    acpi_enter_sleep_state_prep
 *
 * PARAMETERS:  sleep_state         - Which sleep state to enter
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Prepare to enter a system sleep state (see ACPI 2.0 spec p 231)
 *              This function must execute with interrupts enabled.
 *              We break sleeping into 2 stages so that OSPM can handle
 *              various OS-specific tasks between the two steps.
 *
 ******************************************************************************/
acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
{
	acpi_status status;
	struct acpi_object_list arg_list;
	union acpi_object arg;

	ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep);

	/*
	 * _PSW methods could be run here to enable wake-on keyboard, LAN, etc.
	 */
	status = acpi_get_sleep_type_data(sleep_state,
					  &acpi_gbl_sleep_type_a,
					  &acpi_gbl_sleep_type_b);
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	/* Setup parameter object */

	arg_list.count = 1;
	arg_list.pointer = &arg;

	arg.type = ACPI_TYPE_INTEGER;
	arg.integer.value = sleep_state;

	/* Run the _PTS and _GTS methods */

	status = acpi_evaluate_object(NULL, METHOD_NAME__PTS, &arg_list, NULL);
	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
		return_ACPI_STATUS(status);
	}

	status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
		return_ACPI_STATUS(status);
	}

	/* Setup the argument to _SST */

	switch (sleep_state) {
	case ACPI_STATE_S0:
		arg.integer.value = ACPI_SST_WORKING;
		break;

	case ACPI_STATE_S1:
	case ACPI_STATE_S2:
	case ACPI_STATE_S3:
		arg.integer.value = ACPI_SST_SLEEPING;
		break;

	case ACPI_STATE_S4:
		arg.integer.value = ACPI_SST_SLEEP_CONTEXT;
		break;

	default:
		arg.integer.value = ACPI_SST_INDICATOR_OFF;	/* Default is off */
		break;
	}

	/* Set the system indicators to show the desired sleep state. */

	status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
		ACPI_EXCEPTION((AE_INFO, status,
				"While executing method _SST"));
	}

	return_ACPI_STATUS(AE_OK);
}
示例#23
0
文件: exfield.c 项目: poppoo/acpica-1
ACPI_STATUS
AcpiExWriteDataToField (
    ACPI_OPERAND_OBJECT     *SourceDesc,
    ACPI_OPERAND_OBJECT     *ObjDesc,
    ACPI_OPERAND_OBJECT     **ResultDesc)
{
    ACPI_STATUS             Status;
    UINT32                  Length;
    void                    *Buffer;
    ACPI_OPERAND_OBJECT     *BufferDesc;
    UINT32                  Function;
    UINT16                  AccessorType;


    ACPI_FUNCTION_TRACE_PTR (ExWriteDataToField, ObjDesc);


    /* Parameter validation */

    if (!SourceDesc || !ObjDesc)
    {
        return_ACPI_STATUS (AE_AML_NO_OPERAND);
    }

    if (ObjDesc->Common.Type == ACPI_TYPE_BUFFER_FIELD)
    {
        /*
         * If the BufferField arguments have not been previously evaluated,
         * evaluate them now and save the results.
         */
        if (!(ObjDesc->Common.Flags & AOPOBJ_DATA_VALID))
        {
            Status = AcpiDsGetBufferFieldArguments (ObjDesc);
            if (ACPI_FAILURE (Status))
            {
                return_ACPI_STATUS (Status);
            }
        }
    }
    else if ((ObjDesc->Common.Type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
             (ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_SMBUS ||
              ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_GSBUS ||
              ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_IPMI))
    {
        /*
         * This is an SMBus, GSBus or IPMI write. We will bypass the entire field
         * mechanism and handoff the buffer directly to the handler. For
         * these address spaces, the buffer is bi-directional; on a write,
         * return data is returned in the same buffer.
         *
         * Source must be a buffer of sufficient size:
         * ACPI_SMBUS_BUFFER_SIZE, ACPI_GSBUS_BUFFER_SIZE, or ACPI_IPMI_BUFFER_SIZE.
         *
         * Note: SMBus and GSBus protocol type is passed in upper 16-bits of Function
         */
        if (SourceDesc->Common.Type != ACPI_TYPE_BUFFER)
        {
            ACPI_ERROR ((AE_INFO,
                "SMBus/IPMI/GenericSerialBus write requires Buffer, found type %s",
                AcpiUtGetObjectTypeName (SourceDesc)));

            return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
        }

        if (ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_SMBUS)
        {
            Length = ACPI_SMBUS_BUFFER_SIZE;
            Function = ACPI_WRITE | (ObjDesc->Field.Attribute << 16);
        }
        else if (ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_GSBUS)
        {
            AccessorType = ObjDesc->Field.Attribute;
            Length = AcpiExGetSerialAccessLength (AccessorType,
                ObjDesc->Field.AccessLength);

	    /*
             * Add additional 2 bytes for modeled GenericSerialBus data buffer:
             * typedef struct {
             *     BYTEStatus; // Byte 0 of the data buffer
             *     BYTELength; // Byte 1 of the data buffer
             *     BYTE[x-1]Data; // Bytes 2-x of the arbitrary length data buffer,
             * }
	     */
            Length += 2;
            Function = ACPI_WRITE | (AccessorType << 16);
        }
        else /* IPMI */
        {
            Length = ACPI_IPMI_BUFFER_SIZE;
            Function = ACPI_WRITE;
        }

        if (SourceDesc->Buffer.Length < Length)
        {
            ACPI_ERROR ((AE_INFO,
                "SMBus/IPMI/GenericSerialBus write requires Buffer of length %u, found length %u",
                Length, SourceDesc->Buffer.Length));

            return_ACPI_STATUS (AE_AML_BUFFER_LIMIT);
        }

        /* Create the bi-directional buffer */

        BufferDesc = AcpiUtCreateBufferObject (Length);
        if (!BufferDesc)
        {
            return_ACPI_STATUS (AE_NO_MEMORY);
        }

        Buffer = BufferDesc->Buffer.Pointer;
        ACPI_MEMCPY (Buffer, SourceDesc->Buffer.Pointer, Length);

        /* Lock entire transaction if requested */

        AcpiExAcquireGlobalLock (ObjDesc->CommonField.FieldFlags);

        /*
         * Perform the write (returns status and perhaps data in the
         * same buffer)
         */
        Status = AcpiExAccessRegion (ObjDesc, 0,
                    (UINT64 *) Buffer, Function);
        AcpiExReleaseGlobalLock (ObjDesc->CommonField.FieldFlags);

        *ResultDesc = BufferDesc;
        return_ACPI_STATUS (Status);
    }

    /* Get a pointer to the data to be written */

    switch (SourceDesc->Common.Type)
    {
    case ACPI_TYPE_INTEGER:

        Buffer = &SourceDesc->Integer.Value;
        Length = sizeof (SourceDesc->Integer.Value);
        break;

    case ACPI_TYPE_BUFFER:

        Buffer = SourceDesc->Buffer.Pointer;
        Length = SourceDesc->Buffer.Length;
        break;

    case ACPI_TYPE_STRING:

        Buffer = SourceDesc->String.Pointer;
        Length = SourceDesc->String.Length;
        break;

    default:

        return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
    }

    ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
        "FieldWrite [FROM]: Obj %p (%s:%X), Buf %p, ByteLen %X\n",
        SourceDesc, AcpiUtGetTypeName (SourceDesc->Common.Type),
        SourceDesc->Common.Type, Buffer, Length));

    ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
        "FieldWrite [TO]:   Obj %p (%s:%X), BitLen %X, BitOff %X, ByteOff %X\n",
        ObjDesc, AcpiUtGetTypeName (ObjDesc->Common.Type),
        ObjDesc->Common.Type,
        ObjDesc->CommonField.BitLength,
        ObjDesc->CommonField.StartFieldBitOffset,
        ObjDesc->CommonField.BaseByteOffset));

    /* Lock entire transaction if requested */

    AcpiExAcquireGlobalLock (ObjDesc->CommonField.FieldFlags);

    /* Write to the field */

    Status = AcpiExInsertIntoField (ObjDesc, Buffer, Length);
    AcpiExReleaseGlobalLock (ObjDesc->CommonField.FieldFlags);

    return_ACPI_STATUS (Status);
}
示例#24
0
/*******************************************************************************
 *
 * FUNCTION:    acpi_enter_sleep_state
 *
 * PARAMETERS:  sleep_state         - Which sleep state to enter
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231)
 *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
 *
 ******************************************************************************/
acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
{
	u32 PM1Acontrol;
	u32 PM1Bcontrol;
	struct acpi_bit_register_info *sleep_type_reg_info;
	struct acpi_bit_register_info *sleep_enable_reg_info;
	u32 in_value;
	acpi_status status;

	ACPI_FUNCTION_TRACE(acpi_enter_sleep_state);

	if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
	    (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
		ACPI_ERROR((AE_INFO, "Sleep values out of range: A=%X B=%X",
			    acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b));
		return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
	}

	sleep_type_reg_info =
	    acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE_A);
	sleep_enable_reg_info =
	    acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE);

	/* Clear wake status */

	status =
	    acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1, ACPI_MTX_DO_NOT_LOCK);
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	/* Clear all fixed and general purpose status bits */

	status = acpi_hw_clear_acpi_status(ACPI_MTX_DO_NOT_LOCK);
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	/*
	 * 1) Disable/Clear all GPEs
	 * 2) Enable all wakeup GPEs
	 */
	status = acpi_hw_disable_all_gpes();
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}
	acpi_gbl_system_awake_and_running = FALSE;

	status = acpi_hw_enable_all_wakeup_gpes();
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	/* Get current value of PM1A control */

	status = acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK,
				       ACPI_REGISTER_PM1_CONTROL, &PM1Acontrol);
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}
	ACPI_DEBUG_PRINT((ACPI_DB_INIT,
			  "Entering sleep state [S%d]\n", sleep_state));

	/* Clear SLP_EN and SLP_TYP fields */

	PM1Acontrol &= ~(sleep_type_reg_info->access_bit_mask |
			 sleep_enable_reg_info->access_bit_mask);
	PM1Bcontrol = PM1Acontrol;

	/* Insert SLP_TYP bits */

	PM1Acontrol |=
	    (acpi_gbl_sleep_type_a << sleep_type_reg_info->bit_position);
	PM1Bcontrol |=
	    (acpi_gbl_sleep_type_b << sleep_type_reg_info->bit_position);

	/*
	 * We split the writes of SLP_TYP and SLP_EN to workaround
	 * poorly implemented hardware.
	 */

	/* Write #1: fill in SLP_TYP data */

	status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
					ACPI_REGISTER_PM1A_CONTROL,
					PM1Acontrol);
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
					ACPI_REGISTER_PM1B_CONTROL,
					PM1Bcontrol);
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	/* Insert SLP_ENABLE bit */

	PM1Acontrol |= sleep_enable_reg_info->access_bit_mask;
	PM1Bcontrol |= sleep_enable_reg_info->access_bit_mask;

	/* Write #2: SLP_TYP + SLP_EN */

	ACPI_FLUSH_CPU_CACHE();

	status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
					ACPI_REGISTER_PM1A_CONTROL,
					PM1Acontrol);
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
					ACPI_REGISTER_PM1B_CONTROL,
					PM1Bcontrol);
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	if (sleep_state > ACPI_STATE_S3) {
		/*
		 * We wanted to sleep > S3, but it didn't happen (by virtue of the
		 * fact that we are still executing!)
		 *
		 * Wait ten seconds, then try again. This is to get S4/S5 to work on
		 * all machines.
		 *
		 * We wait so long to allow chipsets that poll this reg very slowly to
		 * still read the right value. Ideally, this block would go
		 * away entirely.
		 */
		acpi_os_stall(10000000);

		status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
						ACPI_REGISTER_PM1_CONTROL,
						sleep_enable_reg_info->
						access_bit_mask);
		if (ACPI_FAILURE(status)) {
			return_ACPI_STATUS(status);
		}
	}

	/* Wait until we enter sleep state */

	do {
		status = acpi_get_register(ACPI_BITREG_WAKE_STATUS, &in_value,
					   ACPI_MTX_DO_NOT_LOCK);
		if (ACPI_FAILURE(status)) {
			return_ACPI_STATUS(status);
		}

		/* Spin until we wake */

	} while (!in_value);

	return_ACPI_STATUS(AE_OK);
}
示例#25
0
ACPI_STATUS
AcpiEvExecuteRegMethod (
    ACPI_OPERAND_OBJECT     *RegionObj,
    UINT32                  Function)
{
    ACPI_EVALUATE_INFO      *Info;
    ACPI_OPERAND_OBJECT     *Args[3];
    ACPI_OPERAND_OBJECT     *RegionObj2;
    const ACPI_NAME         *RegNamePtr = ACPI_CAST_PTR (ACPI_NAME, METHOD_NAME__REG);
    ACPI_NAMESPACE_NODE     *MethodNode;
    ACPI_NAMESPACE_NODE     *Node;
    ACPI_STATUS             Status;


    ACPI_FUNCTION_TRACE (EvExecuteRegMethod);


    if (!AcpiGbl_NamespaceInitialized ||
        RegionObj->Region.Handler == NULL)
    {
        return_ACPI_STATUS (AE_OK);
    }

    RegionObj2 = AcpiNsGetSecondaryObject (RegionObj);
    if (!RegionObj2)
    {
        return_ACPI_STATUS (AE_NOT_EXIST);
    }

    /*
     * Find any "_REG" method associated with this region definition.
     * The method should always be updated as this function may be
     * invoked after a namespace change.
     */
    Node = RegionObj->Region.Node->Parent;
    Status = AcpiNsSearchOneScope (
        *RegNamePtr, Node, ACPI_TYPE_METHOD, &MethodNode);
    if (ACPI_SUCCESS (Status))
    {
        /*
         * The _REG method is optional and there can be only one per
         * region definition. This will be executed when the handler is
         * attached or removed.
         */
        RegionObj2->Extra.Method_REG = MethodNode;
    }
    if (RegionObj2->Extra.Method_REG == NULL)
    {
        return_ACPI_STATUS (AE_OK);
    }

    /* _REG(DISCONNECT) should be paired with _REG(CONNECT) */

    if ((Function == ACPI_REG_CONNECT &&
        RegionObj->Common.Flags & AOPOBJ_REG_CONNECTED) ||
        (Function == ACPI_REG_DISCONNECT &&
         !(RegionObj->Common.Flags & AOPOBJ_REG_CONNECTED)))
    {
        return_ACPI_STATUS (AE_OK);
    }

    /* Allocate and initialize the evaluation information block */

    Info = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_EVALUATE_INFO));
    if (!Info)
    {
        return_ACPI_STATUS (AE_NO_MEMORY);
    }

    Info->PrefixNode = RegionObj2->Extra.Method_REG;
    Info->RelativePathname = NULL;
    Info->Parameters = Args;
    Info->Flags = ACPI_IGNORE_RETURN_VALUE;

    /*
     * The _REG method has two arguments:
     *
     * Arg0 - Integer:
     *  Operation region space ID Same value as RegionObj->Region.SpaceId
     *
     * Arg1 - Integer:
     *  connection status 1 for connecting the handler, 0 for disconnecting
     *  the handler (Passed as a parameter)
     */
    Args[0] = AcpiUtCreateIntegerObject ((UINT64) RegionObj->Region.SpaceId);
    if (!Args[0])
    {
        Status = AE_NO_MEMORY;
        goto Cleanup1;
    }

    Args[1] = AcpiUtCreateIntegerObject ((UINT64) Function);
    if (!Args[1])
    {
        Status = AE_NO_MEMORY;
        goto Cleanup2;
    }

    Args[2] = NULL; /* Terminate list */

    /* Execute the method, no return value */

    ACPI_DEBUG_EXEC (
        AcpiUtDisplayInitPathname (ACPI_TYPE_METHOD, Info->PrefixNode, NULL));

    Status = AcpiNsEvaluate (Info);
    AcpiUtRemoveReference (Args[1]);

    if (ACPI_FAILURE (Status))
    {
        goto Cleanup2;
    }

    if (Function == ACPI_REG_CONNECT)
    {
        RegionObj->Common.Flags |= AOPOBJ_REG_CONNECTED;
    }
    else
    {
        RegionObj->Common.Flags &= ~AOPOBJ_REG_CONNECTED;
    }

Cleanup2:
    AcpiUtRemoveReference (Args[0]);

Cleanup1:
    ACPI_FREE (Info);
    return_ACPI_STATUS (Status);
}
示例#26
0
/*******************************************************************************
 *
 * FUNCTION:    acpi_leave_sleep_state
 *
 * PARAMETERS:  sleep_state         - Which sleep state we just exited
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
 *              Called with interrupts ENABLED.
 *
 ******************************************************************************/
acpi_status acpi_leave_sleep_state(u8 sleep_state)
{
	struct acpi_object_list arg_list;
	union acpi_object arg;
	acpi_status status;
	struct acpi_bit_register_info *sleep_type_reg_info;
	struct acpi_bit_register_info *sleep_enable_reg_info;
	u32 PM1Acontrol;
	u32 PM1Bcontrol;

	ACPI_FUNCTION_TRACE(acpi_leave_sleep_state);

	/*
	 * Set SLP_TYPE and SLP_EN to state S0.
	 * This is unclear from the ACPI Spec, but it is required
	 * by some machines.
	 */
	status = acpi_get_sleep_type_data(ACPI_STATE_S0,
					  &acpi_gbl_sleep_type_a,
					  &acpi_gbl_sleep_type_b);
	if (ACPI_SUCCESS(status)) {
		sleep_type_reg_info =
		    acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE_A);
		sleep_enable_reg_info =
		    acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE);

		/* Get current value of PM1A control */

		status = acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK,
					       ACPI_REGISTER_PM1_CONTROL,
					       &PM1Acontrol);
		if (ACPI_SUCCESS(status)) {

			/* Clear SLP_EN and SLP_TYP fields */

			PM1Acontrol &= ~(sleep_type_reg_info->access_bit_mask |
					 sleep_enable_reg_info->
					 access_bit_mask);
			PM1Bcontrol = PM1Acontrol;

			/* Insert SLP_TYP bits */

			PM1Acontrol |=
			    (acpi_gbl_sleep_type_a << sleep_type_reg_info->
			     bit_position);
			PM1Bcontrol |=
			    (acpi_gbl_sleep_type_b << sleep_type_reg_info->
			     bit_position);

			/* Just ignore any errors */

			(void)acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
						     ACPI_REGISTER_PM1A_CONTROL,
						     PM1Acontrol);
			(void)acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
						     ACPI_REGISTER_PM1B_CONTROL,
						     PM1Bcontrol);
		}
	}

	/* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */

	acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID;

	/* Setup parameter object */

	arg_list.count = 1;
	arg_list.pointer = &arg;
	arg.type = ACPI_TYPE_INTEGER;

	/* Ignore any errors from these methods */

	arg.integer.value = ACPI_SST_WAKING;
	status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
		ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
	}

	arg.integer.value = sleep_state;
	status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
		ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
	}

	status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL);
	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
		ACPI_EXCEPTION((AE_INFO, status, "During Method _WAK"));
	}
	/* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */

	/*
	 * Restore the GPEs:
	 * 1) Disable/Clear all GPEs
	 * 2) Enable all runtime GPEs
	 */
	status = acpi_hw_disable_all_gpes();
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}
	acpi_gbl_system_awake_and_running = TRUE;

	status = acpi_hw_enable_all_runtime_gpes();
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	/* Enable power button */

	(void)
	    acpi_set_register(acpi_gbl_fixed_event_info
			      [ACPI_EVENT_POWER_BUTTON].enable_register_id, 1,
			      ACPI_MTX_DO_NOT_LOCK);

	(void)
	    acpi_set_register(acpi_gbl_fixed_event_info
			      [ACPI_EVENT_POWER_BUTTON].status_register_id, 1,
			      ACPI_MTX_DO_NOT_LOCK);

	arg.integer.value = ACPI_SST_WORKING;
	status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
		ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
	}

	return_ACPI_STATUS(status);
}
示例#27
0
文件: nsinit.c 项目: CSRedRat/reactos
static ACPI_STATUS
AcpiNsInitOneDevice (
    ACPI_HANDLE             ObjHandle,
    UINT32                  NestingLevel,
    void                    *Context,
    void                    **ReturnValue)
{
    ACPI_DEVICE_WALK_INFO   *WalkInfo = ACPI_CAST_PTR (ACPI_DEVICE_WALK_INFO, Context);
    ACPI_EVALUATE_INFO      *Info = WalkInfo->EvaluateInfo;
    UINT32                  Flags;
    ACPI_STATUS             Status;
    ACPI_NAMESPACE_NODE     *DeviceNode;


    ACPI_FUNCTION_TRACE (NsInitOneDevice);


    /* We are interested in Devices, Processors and ThermalZones only */

    DeviceNode = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, ObjHandle);
    if ((DeviceNode->Type != ACPI_TYPE_DEVICE)    &&
        (DeviceNode->Type != ACPI_TYPE_PROCESSOR) &&
        (DeviceNode->Type != ACPI_TYPE_THERMAL))
    {
        return_ACPI_STATUS (AE_OK);
    }

    /*
     * Because of an earlier namespace analysis, all subtrees that contain an
     * _INI method are tagged.
     *
     * If this device subtree does not contain any _INI methods, we
     * can exit now and stop traversing this entire subtree.
     */
    if (!(DeviceNode->Flags & ANOBJ_SUBTREE_HAS_INI))
    {
        return_ACPI_STATUS (AE_CTRL_DEPTH);
    }

    /*
     * Run _STA to determine if this device is present and functioning. We
     * must know this information for two important reasons (from ACPI spec):
     *
     * 1) We can only run _INI if the device is present.
     * 2) We must abort the device tree walk on this subtree if the device is
     *    not present and is not functional (we will not examine the children)
     *
     * The _STA method is not required to be present under the device, we
     * assume the device is present if _STA does not exist.
     */
    ACPI_DEBUG_EXEC (AcpiUtDisplayInitPathname (
        ACPI_TYPE_METHOD, DeviceNode, METHOD_NAME__STA));

    Status = AcpiUtExecute_STA (DeviceNode, &Flags);
    if (ACPI_FAILURE (Status))
    {
        /* Ignore error and move on to next device */

        return_ACPI_STATUS (AE_OK);
    }

    /*
     * Flags == -1 means that _STA was not found. In this case, we assume that
     * the device is both present and functional.
     *
     * From the ACPI spec, description of _STA:
     *
     * "If a device object (including the processor object) does not have an
     * _STA object, then OSPM assumes that all of the above bits are set (in
     * other words, the device is present, ..., and functioning)"
     */
    if (Flags != ACPI_UINT32_MAX)
    {
        WalkInfo->Num_STA++;
    }

    /*
     * Examine the PRESENT and FUNCTIONING status bits
     *
     * Note: ACPI spec does not seem to specify behavior for the present but
     * not functioning case, so we assume functioning if present.
     */
    if (!(Flags & ACPI_STA_DEVICE_PRESENT))
    {
        /* Device is not present, we must examine the Functioning bit */

        if (Flags & ACPI_STA_DEVICE_FUNCTIONING)
        {
            /*
             * Device is not present but is "functioning". In this case,
             * we will not run _INI, but we continue to examine the children
             * of this device.
             *
             * From the ACPI spec, description of _STA: (Note - no mention
             * of whether to run _INI or not on the device in question)
             *
             * "_STA may return bit 0 clear (not present) with bit 3 set
             * (device is functional). This case is used to indicate a valid
             * device for which no device driver should be loaded (for example,
             * a bridge device.) Children of this device may be present and
             * valid. OSPM should continue enumeration below a device whose
             * _STA returns this bit combination"
             */
            return_ACPI_STATUS (AE_OK);
        }
        else
        {
            /*
             * Device is not present and is not functioning. We must abort the
             * walk of this subtree immediately -- don't look at the children
             * of such a device.
             *
             * From the ACPI spec, description of _INI:
             *
             * "If the _STA method indicates that the device is not present,
             * OSPM will not run the _INI and will not examine the children
             * of the device for _INI methods"
             */
            return_ACPI_STATUS (AE_CTRL_DEPTH);
        }
    }

    /*
     * The device is present or is assumed present if no _STA exists.
     * Run the _INI if it exists (not required to exist)
     *
     * Note: We know there is an _INI within this subtree, but it may not be
     * under this particular device, it may be lower in the branch.
     */
    ACPI_DEBUG_EXEC (AcpiUtDisplayInitPathname (
        ACPI_TYPE_METHOD, DeviceNode, METHOD_NAME__INI));

    memset (Info, 0, sizeof (ACPI_EVALUATE_INFO));
    Info->PrefixNode = DeviceNode;
    Info->RelativePathname = METHOD_NAME__INI;
    Info->Parameters = NULL;
    Info->Flags = ACPI_IGNORE_RETURN_VALUE;

    Status = AcpiNsEvaluate (Info);
    if (ACPI_SUCCESS (Status))
    {
        WalkInfo->Num_INI++;
    }

#ifdef ACPI_DEBUG_OUTPUT
    else if (Status != AE_NOT_FOUND)
    {
        /* Ignore error and move on to next device */

        char *ScopeName = AcpiNsGetNormalizedPathname (DeviceNode, TRUE);

        ACPI_EXCEPTION ((AE_INFO, Status, "during %s._INI execution",
            ScopeName));
        ACPI_FREE (ScopeName);
    }
#endif

    /* Ignore errors from above */

    Status = AE_OK;

    /*
     * The _INI method has been run if present; call the Global Initialization
     * Handler for this device.
     */
    if (AcpiGbl_InitHandler)
    {
        Status = AcpiGbl_InitHandler (DeviceNode, ACPI_INIT_DEVICE_INI);
    }

    return_ACPI_STATUS (Status);
}
示例#28
0
acpi_status acpi_ex_opcode_3A_1T_1R(struct acpi_walk_state *walk_state)
{
	union acpi_operand_object **operand = &walk_state->operands[0];
	union acpi_operand_object *return_desc = NULL;
	char *buffer = NULL;
	acpi_status status = AE_OK;
	acpi_integer index;
	acpi_size length;

	ACPI_FUNCTION_TRACE_STR(ex_opcode_3A_1T_1R,
				acpi_ps_get_opcode_name(walk_state->opcode));

	switch (walk_state->opcode) {
	case AML_MID_OP:	/* Mid (Source[0], Index[1], Length[2], Result[3]) */

		/*
		 * Create the return object.  The Source operand is guaranteed to be
		 * either a String or a Buffer, so just use its type.
		 */
		return_desc = acpi_ut_create_internal_object((operand[0])->
							     common.type);
		if (!return_desc) {
			status = AE_NO_MEMORY;
			goto cleanup;
		}

		/* Get the Integer values from the objects */

		index = operand[1]->integer.value;
		length = (acpi_size) operand[2]->integer.value;

		/*
		 * If the index is beyond the length of the String/Buffer, or if the
		 * requested length is zero, return a zero-length String/Buffer
		 */
		if (index >= operand[0]->string.length) {
			length = 0;
		}

		/* Truncate request if larger than the actual String/Buffer */

		else if ((index + length) > operand[0]->string.length) {
			length = (acpi_size) operand[0]->string.length -
			    (acpi_size) index;
		}

		/* Strings always have a sub-pointer, not so for buffers */

		switch ((operand[0])->common.type) {
		case ACPI_TYPE_STRING:

			/* Always allocate a new buffer for the String */

			buffer = ACPI_ALLOCATE_ZEROED((acpi_size) length + 1);
			if (!buffer) {
				status = AE_NO_MEMORY;
				goto cleanup;
			}
			break;

		case ACPI_TYPE_BUFFER:

			/* If the requested length is zero, don't allocate a buffer */

			if (length > 0) {

				/* Allocate a new buffer for the Buffer */

				buffer = ACPI_ALLOCATE_ZEROED(length);
				if (!buffer) {
					status = AE_NO_MEMORY;
					goto cleanup;
				}
			}
			break;

		default:	/* Should not happen */

			status = AE_AML_OPERAND_TYPE;
			goto cleanup;
		}

		if (buffer) {

			/* We have a buffer, copy the portion requested */

			ACPI_MEMCPY(buffer, operand[0]->string.pointer + index,
				    length);
		}

		/* Set the length of the new String/Buffer */

		return_desc->string.pointer = buffer;
		return_desc->string.length = (u32) length;

		/* Mark buffer initialized */

		return_desc->buffer.flags |= AOPOBJ_DATA_VALID;
		break;

	default:

		ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
			    walk_state->opcode));
		status = AE_AML_BAD_OPCODE;
		goto cleanup;
	}

	/* Store the result in the target */

	status = acpi_ex_store(return_desc, operand[3], walk_state);

      cleanup:

	/* Delete return object on error */

	if (ACPI_FAILURE(status) || walk_state->result_obj) {
		acpi_ut_remove_reference(return_desc);
		walk_state->result_obj = NULL;
	}

	/* Set the return object and exit */

	else {
		walk_state->result_obj = return_desc;
	}
	return_ACPI_STATUS(status);
}
示例#29
0
ACPI_STATUS
AcpiUtWalkPackageTree (
    ACPI_OPERAND_OBJECT     *SourceObject,
    void                    *TargetObject,
    ACPI_PKG_CALLBACK       WalkCallback,
    void                    *Context)
{
    ACPI_STATUS             Status = AE_OK;
    ACPI_GENERIC_STATE      *StateList = NULL;
    ACPI_GENERIC_STATE      *State;
    UINT32                  ThisIndex;
    ACPI_OPERAND_OBJECT     *ThisSourceObj;


    ACPI_FUNCTION_TRACE ("UtWalkPackageTree");


    State = AcpiUtCreatePkgState (SourceObject, TargetObject, 0);
    if (!State)
    {
        return_ACPI_STATUS (AE_NO_MEMORY);
    }

    while (State)
    {
        /* Get one element of the package */

        ThisIndex     = State->Pkg.Index;
        ThisSourceObj = (ACPI_OPERAND_OBJECT *)
                        State->Pkg.SourceObject->Package.Elements[ThisIndex];

        /*
         * Check for:
         * 1) An uninitialized package element.  It is completely
         *    legal to declare a package and leave it uninitialized
         * 2) Not an internal object - can be a namespace node instead
         * 3) Any type other than a package.  Packages are handled in else
         *    case below.
         */
        if ((!ThisSourceObj) ||
            (ACPI_GET_DESCRIPTOR_TYPE (ThisSourceObj) != ACPI_DESC_TYPE_OPERAND) ||
            (ACPI_GET_OBJECT_TYPE (ThisSourceObj) != ACPI_TYPE_PACKAGE))
        {
            Status = WalkCallback (ACPI_COPY_TYPE_SIMPLE, ThisSourceObj,
                                    State, Context);
            if (ACPI_FAILURE (Status))
            {
                return_ACPI_STATUS (Status);
            }

            State->Pkg.Index++;
            while (State->Pkg.Index >= State->Pkg.SourceObject->Package.Count)
            {
                /*
                 * We've handled all of the objects at this level,  This means
                 * that we have just completed a package.  That package may
                 * have contained one or more packages itself.
                 *
                 * Delete this state and pop the previous state (package).
                 */
                AcpiUtDeleteGenericState (State);
                State = AcpiUtPopGenericState (&StateList);

                /* Finished when there are no more states */

                if (!State)
                {
                    /*
                     * We have handled all of the objects in the top level
                     * package just add the length of the package objects
                     * and exit
                     */
                    return_ACPI_STATUS (AE_OK);
                }

                /*
                 * Go back up a level and move the index past the just
                 * completed package object.
                 */
                State->Pkg.Index++;
            }
        }
        else
        {
            /* This is a subobject of type package */

            Status = WalkCallback (ACPI_COPY_TYPE_PACKAGE, ThisSourceObj,
                                        State, Context);
            if (ACPI_FAILURE (Status))
            {
                return_ACPI_STATUS (Status);
            }

            /*
             * Push the current state and create a new one
             * The callback above returned a new target package object.
             */
            AcpiUtPushGenericState (&StateList, State);
            State = AcpiUtCreatePkgState (ThisSourceObj,
                                            State->Pkg.ThisTargetObj, 0);
            if (!State)
            {
                return_ACPI_STATUS (AE_NO_MEMORY);
            }
        }
    }

    /* We should never get here */

    return_ACPI_STATUS (AE_AML_INTERNAL);
}
ACPI_STATUS
AcpiExConvertToInteger (
    ACPI_OPERAND_OBJECT     *ObjDesc,
    ACPI_OPERAND_OBJECT     **ResultDesc,
    UINT32                  Flags)
{
    ACPI_OPERAND_OBJECT     *ReturnDesc;
    UINT8                   *Pointer;
    UINT64                  Result;
    UINT32                  i;
    UINT32                  Count;
    ACPI_STATUS             Status;


    ACPI_FUNCTION_TRACE_PTR (ExConvertToInteger, ObjDesc);


    switch (ObjDesc->Common.Type)
    {
    case ACPI_TYPE_INTEGER:

        /* No conversion necessary */

        *ResultDesc = ObjDesc;
        return_ACPI_STATUS (AE_OK);

    case ACPI_TYPE_BUFFER:
    case ACPI_TYPE_STRING:

        /* Note: Takes advantage of common buffer/string fields */

        Pointer = ObjDesc->Buffer.Pointer;
        Count   = ObjDesc->Buffer.Length;
        break;

    default:

        return_ACPI_STATUS (AE_TYPE);
    }

    /*
     * Convert the buffer/string to an integer. Note that both buffers and
     * strings are treated as raw data - we don't convert ascii to hex for
     * strings.
     *
     * There are two terminating conditions for the loop:
     * 1) The size of an integer has been reached, or
     * 2) The end of the buffer or string has been reached
     */
    Result = 0;

    /* String conversion is different than Buffer conversion */

    switch (ObjDesc->Common.Type)
    {
    case ACPI_TYPE_STRING:
        /*
         * Convert string to an integer - for most cases, the string must be
         * hexadecimal as per the ACPI specification. The only exception (as
         * of ACPI 3.0) is that the ToInteger() operator allows both decimal
         * and hexadecimal strings (hex prefixed with "0x").
         */
        Status = AcpiUtStrtoul64 ((char *) Pointer, Flags, &Result);
        if (ACPI_FAILURE (Status))
        {
            return_ACPI_STATUS (Status);
        }
        break;

    case ACPI_TYPE_BUFFER:

        /* Check for zero-length buffer */

        if (!Count)
        {
            return_ACPI_STATUS (AE_AML_BUFFER_LIMIT);
        }

        /* Transfer no more than an integer's worth of data */

        if (Count > AcpiGbl_IntegerByteWidth)
        {
            Count = AcpiGbl_IntegerByteWidth;
        }

        /*
         * Convert buffer to an integer - we simply grab enough raw data
         * from the buffer to fill an integer
         */
        for (i = 0; i < Count; i++)
        {
            /*
             * Get next byte and shift it into the Result.
             * Little endian is used, meaning that the first byte of the buffer
             * is the LSB of the integer
             */
            Result |= (((UINT64) Pointer[i]) << (i * 8));
        }
        break;

    default:

        /* No other types can get here */

        break;
    }

    /* Create a new integer */

    ReturnDesc = AcpiUtCreateIntegerObject (Result);
    if (!ReturnDesc)
    {
        return_ACPI_STATUS (AE_NO_MEMORY);
    }

    ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
        ACPI_FORMAT_UINT64 (Result)));

    /* Save the Result */

    (void) AcpiExTruncateFor32bitTable (ReturnDesc);
    *ResultDesc = ReturnDesc;
    return_ACPI_STATUS (AE_OK);
}