/*!
* Memory copy using HW engines.
* The table below describes the supported copy modes that
* reference by the data input/output buffers:
*
* ----------------------------------------------
* | DataIn_ptr | DataOut_ptr |
* |--------------------------------------------|
* | SRAM | DCACHE/SRAM/DLLI/MLLI |
* | ICACHE | DCACHE/SRAM/DLLI/MLLI |
* | DCACHE | DCACHE/SRAM/DLLI/MLLI |
* | DLLI | DCACHE/SRAM/DLLI |
* | MLLI | DCACHE/SRAM/MLLI |
* ----------------------------------------------
*
* \param DataIn_ptr This is the source buffer which need to copy from.
* It may be a SeP local address or a DMA Object handle as described
* in the table above.
* \param DataSize In bytes
* \param DataOut_ptr This is the destination buffer which need to copy to.
* It may be a SeP local address or a DMA Object handle as described
* in the table above.
*
* Restriction: MLLI refers to DMA oject in System memory space.
*
* \return CRYSError_t On success CRYS_OK is returned, on failure an error according to
* CRYS_Bypass_error.h
*/
CIMPORT_C CRYSError_t CRYS_Bypass(DxUint8_t* DataIn_ptr,
DxUint32_t DataSize,
DxUint8_t* DataOut_ptr)
{
/* The return error identifiers */
CRYSError_t Error = CRYS_OK;
int symRc = DX_RET_OK;
DxUint32_t ctxBuff[CRYS_BYPASS_BUFF_OF_WORDS] = {0x0};
/* pointer on SEP AES context struct*/
struct sep_ctx_generic *pSepContext = (struct sep_ctx_generic *)DX_InitUserCtxLocation(ctxBuff,
sizeof(ctxBuff),
sizeof(struct sep_ctx_generic));
/* data size must be a positive number and a block size mult */
if (DataSize == 0 )
return DX_SUCCESS;
/* if the users Data In pointer is illegal return an error */
if ( DataIn_ptr == DX_NULL )
return CRYS_BYPASS_INVALID_INPUT_POINTER_ERROR;
/* if the users Data Out pointer is illegal return an error */
if ( DataOut_ptr == DX_NULL )
return CRYS_BYPASS_INVALID_OUTPUT_POINTER_ERROR;
Error = validateParams(DataIn_ptr, DataSize);
if ( Error != CRYS_OK ) {
return Error;
}
Error = validateParams(DataOut_ptr, DataSize);
if ( Error != CRYS_OK ) {
return Error;
}
pSepContext->alg = SEP_CRYPTO_ALG_BYPASS;
symRc = SymDriverAdaptorProcess(pSepContext,DataIn_ptr, DataOut_ptr, DataSize);
return DX_CRYS_RETURN_ERROR(symRc, 0, SymAdaptor2CrysBypassErr);
}
// generate and save a bitmap for use by ATLC
int EdgeCoupledEmbeddedMicrostrip2B1AWindow::drawBitmap()
{
if(!validateParams())
return -1;
double boardHeight = params["H1"]->value() + params["H2"]->value() + params["H3"]->value() + params["T1"]->value() * 2;
double tlineWidth = fmax(params["W1"]->value(), params["W2"]->value()) + params["S1"]->value();
calcScale(boardHeight, tlineWidth);
int substrate1HeightPix = scale_factor * params["H1"]->value();
int substrate2HeightPix = scale_factor * params["H2"]->value();
int substrate3HeightPix = scale_factor * params["H3"]->value();
int traceThicknessPix = scale_factor * params["T1"]->value();
int traceSeparationPix = scale_factor * params["S1"]->value();
int lowerTraceWidthPix = scale_factor * params["W1"]->value();
int upperTraceWidthPix = scale_factor * params["W2"]->value();
// create the BMP that ATLC will use
MakeBitmap bmp(width, height);
// bottom copper (arbitrary thickness)
bmp.drawRect(0, 0, width, traceThicknessPix, COLOR_COPPER_GND);
// laminate
bmp.drawRect(0, traceThicknessPix, width, substrate1HeightPix, COLOR_LAM1);
bmp.drawRect(0, traceThicknessPix+substrate1HeightPix, width, substrate2HeightPix, COLOR_LAM2);
bmp.drawRect(0, traceThicknessPix+substrate1HeightPix+substrate2HeightPix, width, substrate3HeightPix, COLOR_LAM3);
// microstrip copper above second laminate
bmp.drawTrapezoid( (width - 2*lowerTraceWidthPix - traceSeparationPix)/2,
traceThicknessPix+substrate1HeightPix+substrate2HeightPix,
lowerTraceWidthPix,
upperTraceWidthPix,
traceThicknessPix,
COLOR_COPPER_POS);
bmp.drawTrapezoid( (width - 2*lowerTraceWidthPix - traceSeparationPix)/2 + traceSeparationPix + lowerTraceWidthPix,
traceThicknessPix+substrate1HeightPix+substrate2HeightPix,
lowerTraceWidthPix,
upperTraceWidthPix,
traceThicknessPix,
COLOR_COPPER_NEG);
// draw enclosing boundary
bmp.drawRectOutline(0, 0, width-1, height-1, 1, COLOR_COPPER_GND);
// save bitmap file
atlc->setEr(COLOR_LAM1, params["Er1"]->value());
atlc->setEr(COLOR_LAM2, params["Er2"]->value());
atlc->setEr(COLOR_LAM3, params["Er3"]->value());
bmp.save(atlc->simBitmap());
return 0;
}
bool CopyBit::prepare(hwc_context_t *ctx, hwc_display_contents_1_t *list) {
sCopyBitDraw = false;
int compositionType =
qdutils::QCCompositionType::getInstance().getCompositionType();
if ((compositionType == qdutils::COMPOSITION_TYPE_GPU) ||
(compositionType == qdutils::COMPOSITION_TYPE_CPU)) {
//GPU/CPU composition, don't change layer composition type
return true;
}
if(!(validateParams(ctx, list))) {
ALOGE("%s:Invalid Params", __FUNCTION__);
return false;
}
if(sIsSkipLayerPresent) {
//GPU will be anyways used
return false;
}
bool useCopybitForYUV = canUseCopybitForYUV(ctx);
bool useCopybitForRGB = canUseCopybitForRGB(ctx, list);
for (int i=list->numHwLayers-1; i >= 0 ; i--) {
private_handle_t *hnd = (private_handle_t *)list->hwLayers[i].handle;
if (hnd->bufferType == BUFFER_TYPE_VIDEO) {
//YUV layer, check, if copybit can be used
// mark the video layer to gpu when all layer is
// going to gpu in case of dynamic composition.
if (useCopybitForYUV && useCopybitForRGB) {
list->hwLayers[i].compositionType = HWC_USE_COPYBIT;
sCopyBitDraw = true;
}
} else if (hnd->bufferType == BUFFER_TYPE_UI) {
//RGB layer, check, if copybit can be used
if (useCopybitForRGB) {
list->hwLayers[i].compositionType = HWC_USE_COPYBIT;
sCopyBitDraw = true;
}
}
}
return true;
}
bool CopyBit::prepare(hwc_context_t *ctx, hwc_display_contents_1_t *list) {
int compositionType =
qdutils::QCCompositionType::getInstance().getCompositionType();
if ((compositionType & qdutils::COMPOSITION_TYPE_GPU) ||
(compositionType & qdutils::COMPOSITION_TYPE_CPU)) {
//GPU/CPU composition, don't change layer composition type
return true;
}
bool useCopybitForYUV = canUseCopybitForYUV(ctx);
bool useCopybitForRGB = canUseCopybitForRGB(ctx, list);
if(!(validateParams(ctx, list))) {
ALOGE("%s:Invalid Params", __FUNCTION__);
return false;
}
sCopyBitDraw = false;
for (int i=list->numHwLayers-1; i >= 0 ; i--) {
private_handle_t *hnd = (private_handle_t *)list->hwLayers[i].handle;
if (isSkipLayer(&list->hwLayers[i])) {
return true;
} else if (hnd->bufferType == BUFFER_TYPE_VIDEO) {
//YUV layer, check, if copybit can be used
if (useCopybitForYUV) {
list->hwLayers[i].compositionType = HWC_USE_COPYBIT;
sCopyBitDraw = true;
}
} else if (hnd->bufferType == BUFFER_TYPE_UI) {
//RGB layer, check, if copybit can be used
if (useCopybitForRGB) {
list->hwLayers[i].compositionType = HWC_USE_COPYBIT;
sCopyBitDraw = true;
}
}
}
return true;
}
bool CopyBit::prepare(hwc_context_t *ctx, hwc_display_contents_1_t *list, int dpy) {
if(mEngine == NULL) {
// No copybit device found - cannot use copybit
return false;
}
int compositionType = qdutils::QCCompositionType::
getInstance().getCompositionType();
if ((compositionType == qdutils::COMPOSITION_TYPE_GPU) ||
(compositionType == qdutils::COMPOSITION_TYPE_CPU)) {
//GPU/CPU composition, don't change layer composition type
return true;
}
if(!(validateParams(ctx, list))) {
ALOGE("%s:Invalid Params", __FUNCTION__);
return false;
}
if(ctx->listStats[dpy].skipCount) {
//GPU will be anyways used
return false;
}
if (ctx->listStats[dpy].numAppLayers > MAX_NUM_LAYERS) {
// Reached max layers supported by HWC.
return false;
}
if (!ctx->mFBUpdate[dpy]->isUsed())
return false;
bool useCopybitForYUV = canUseCopybitForYUV(ctx);
bool useCopybitForRGB = canUseCopybitForRGB(ctx, list, dpy);
LayerProp *layerProp = ctx->layerProp[dpy];
size_t fbLayerIndex = ctx->listStats[dpy].fbLayerIndex;
hwc_layer_1_t *fbLayer = &list->hwLayers[fbLayerIndex];
private_handle_t *fbHnd = (private_handle_t *)fbLayer->handle;
//Allocate render buffers if they're not allocated
if (useCopybitForYUV || useCopybitForRGB) {
int ret = allocRenderBuffers(fbHnd->width,
fbHnd->height,
fbHnd->format);
if (ret < 0) {
return false;
}
}
int i;
if (useCopybitForYUV) {
for (i = 0; i < ctx->listStats[dpy].numAppLayers; i++) {
if (list->hwLayers[i].compositionType == HWC_FRAMEBUFFER) {
private_handle_t *hnd = (private_handle_t *)list->hwLayers[i].handle;
if (hnd->bufferType == BUFFER_TYPE_VIDEO) {
layerProp[i].mFlags |= HWC_COPYBIT;
list->hwLayers[i].compositionType = HWC_OVERLAY;
list->hwLayers[i].hints |= HWC_HINT_CLEAR_FB;
mCopyBitDraw = true;
}
}
}
}
if (useCopybitForRGB || mCopyBitDraw) {
for (i = 0; i < ctx->listStats[dpy].numAppLayers; i++) {
if (list->hwLayers[i].compositionType == HWC_FRAMEBUFFER) {
private_handle_t *hnd = (private_handle_t *)list->hwLayers[i].handle;
if (hnd->bufferType == BUFFER_TYPE_UI) {
layerProp[i].mFlags |= HWC_COPYBIT;
list->hwLayers[i].compositionType = HWC_OVERLAY;
list->hwLayers[i].hints |= HWC_HINT_CLEAR_FB;
mCopyBitDraw = true;
}
}
}
}
if (mCopyBitDraw) {
mCurRenderBufferIndex = (mCurRenderBufferIndex + 1) % NUM_RENDER_BUFFERS;
}
return true;
}
bool CopyBit::prepare(hwc_context_t *ctx, hwc_display_contents_1_t *list,
int dpy) {
if(mEngine == NULL) {
// No copybit device found - cannot use copybit
return false;
}
int compositionType = qdutils::QCCompositionType::
getInstance().getCompositionType();
if ((compositionType == qdutils::COMPOSITION_TYPE_GPU) ||
(compositionType == qdutils::COMPOSITION_TYPE_CPU)) {
//GPU/CPU composition, don't change layer composition type
return true;
}
if(!(validateParams(ctx, list))) {
ALOGE("%s:Invalid Params", __FUNCTION__);
return false;
}
if(ctx->listStats[dpy].skipCount) {
//GPU will be anyways used
return false;
}
if (ctx->listStats[dpy].numAppLayers > MAX_NUM_LAYERS) {
// Reached max layers supported by HWC.
return false;
}
bool useCopybitForYUV = canUseCopybitForYUV(ctx);
bool useCopybitForRGB = canUseCopybitForRGB(ctx, list, dpy);
LayerProp *layerProp = ctx->layerProp[dpy];
size_t fbLayerIndex = ctx->listStats[dpy].fbLayerIndex;
hwc_layer_1_t *fbLayer = &list->hwLayers[fbLayerIndex];
private_handle_t *fbHnd = (private_handle_t *)fbLayer->handle;
//Allocate render buffers if they're not allocated
if (useCopybitForYUV || useCopybitForRGB) {
int ret = allocRenderBuffers(fbHnd->width,
fbHnd->height,
fbHnd->format);
if (ret < 0) {
return false;
} else {
mCurRenderBufferIndex = (mCurRenderBufferIndex + 1) %
NUM_RENDER_BUFFERS;
}
}
// numAppLayers-1, as we iterate till 0th layer index
for (int i = ctx->listStats[dpy].numAppLayers-1; i >= 0 ; i--) {
private_handle_t *hnd = (private_handle_t *)list->hwLayers[i].handle;
if ((hnd->bufferType == BUFFER_TYPE_VIDEO && useCopybitForYUV) ||
(hnd->bufferType == BUFFER_TYPE_UI && useCopybitForRGB)) {
layerProp[i].mFlags |= HWC_COPYBIT;
list->hwLayers[i].compositionType = HWC_OVERLAY;
mCopyBitDraw = true;
} else {
// We currently cannot mix copybit layers with layers marked to
// be drawn on the framebuffer or that are on the layer cache.
mCopyBitDraw = false;
//There is no need to reset layer properties here as we return in
//draw if mCopyBitDraw is false
}
}
return true;
}