void stylesheets_upgrade()
// Upgrade older stylesheets to the currently used format.
{
// Make the \r marker a section heading instead of a normal paragraph.
{
ReadFiles rf(Directories->get_stylesheets(), "", ".xml1");
for (unsigned int i = 0; i < rf.files.size(); i++) {
ustring filename = gw_build_filename(Directories->get_stylesheets(), rf.files[i]);
gw_message(_("Updating stylesheet: ") + filename);
ReadText rt (filename, true, false);
stylesheet_upgrade_value (rt.lines, "r", "subtype", "2");
unix_unlink (filename.c_str());
ustring newfilename(filename);
newfilename.replace(newfilename.length() - 1, 1, "2");
write_lines (newfilename, rt.lines);
}
}
// Note: The stylesheet.xml template has been updated thus far.
// Every update listed below still needs to be entered into the template.
// At the end of everything, check that we have at least one stylesheet.
{
vector < ustring > stylesheets;
stylesheet_get_ones_available(stylesheets);
if (stylesheets.size() == 0) {
stylesheet_create_new(STANDARDSHEET, stFull);
}
}
}
void ResourceConverterDialog::on_write_anchors_button()
{
// Remove old anchors.
resource_conversion_remove_anchors(lines);
// Flags.
anchors_written = true;
// Do the conversion.
switch (resource_conversion_type) {
case rctChapterStartsAtPatternVerseOneStartsAtChapterVerseStartsAtPattern:
{
resource_conversion_insert_anchors(lines, chapter_pattern_prefix, chapter_pattern_index, chapter_pattern_suffix, verse_pattern_prefix, verse_pattern_index, verse_pattern_suffix);
break;
}
case rctEnd:
{
break;
}
}
// Write text to file.
write_lines(gw_build_filename(workingdirectory, filename), lines);
// Update gui.
if (write_anchors_gui()) {
gui();
}
}
int fs_printf(fs_file fh, const char *fmt, ...)
{
char *buff;
int len;
va_list ap;
va_start(ap, fmt);
len = 1 + vsnprintf(NULL, 0, fmt, ap);
va_end(ap);
if ((buff = malloc(len)))
{
int written;
va_start(ap, fmt);
vsnprintf(buff, len, fmt, ap);
va_end(ap);
/*
* HACK. This assumes fs_printf is always called with the
* intention of writing text, and not arbitrary data.
*/
written = write_lines(buff, strlen(buff), fh);
free(buff);
return written;
}
return 0;
}
void WindowMerge::approval_approve(GtkButton * button)
// Handles the user's approval of a change.
{
// Go through the approval buttons to find the one clicked.
for (unsigned int i = 0; i < approve_buttons.size(); i++) {
if (button == approve_buttons[i].button) {
// Write a new patch file to disk.
vector < ustring > lines;
ustring s;
s = convert_to_string(approve_buttons[i].patch.linenumber);
if (approve_buttons[i].patch.addition)
s.append("a");
else
s.append("d");
s.append("0");
lines.push_back(s);
if (approve_buttons[i].patch.addition)
s = ">";
else
s = "<";
lines.push_back(s + " " + approve_buttons[i].patch.change);
write_lines(approve_patch_file, lines);
// Apply the patch to master.
ustring command = "patch" + shell_quote_space(approve_master_file) + shell_quote_space(approve_patch_file);
if (system(command.c_str())) ; // This one could use GwSpawn, but it was not tested.
// Show the new differences after the change has been accepted.
approval_show_diff();
}
}
}
void ExportParatextStylesheet::save (ustring filename)
{
// Write the stylesheet to file.
if (!g_str_has_suffix (filename.c_str(), ".sty")) {
filename.append (".sty");
}
write_lines (filename, stylesheet_lines);
}
void odt_set_font(const ustring & directory, const ustring & fontname)
// Writes the font to the right files in the directory given.
{
// Save the font in the content file.
ReadText rt2(odt_content_xml_filename(directory), true, false);
for (unsigned int i = 0; i < rt2.lines.size(); i++) {
replace_text(rt2.lines[i], "Bitstream", fontname);
}
write_lines(odt_content_xml_filename(directory), rt2.lines);
}
int main()
{
int line_count;
char storage[MAXLINELENGTH * MAXLINECOUNT];
char* lines[MAXLINECOUNT]; /* a list of pointers to locations in storage[] */
line_count = read_lines(storage, lines);
qsort(lines, 0, line_count);
write_lines(lines, line_count);
return 0;
}
int main(int argc, char* argv[])
{
int num_lines;
char* lines[MAX_NUM_LINES];
bool sort_numerically = false;
if (argc > 1)
{
for (int i = 1; i < argc; ++i)
{
if (strcmp(argv[i], SORT_NUMERICALLY) == 0)
{
sort_numerically = true;
}
else if (strcmp(argv[i], SORT_REVERSE) == 0)
{
sort_reverse = true;
}
else if (strcmp(argv[i], FOLD_CASE) == 0)
{
fold_case = true;
}
else if (strcmp(argv[i], SORT_BY_FIELD) == 0)
{
if (i == argc - 1)
{
printf("error: when sorting by field, you must specify the field to sort by\n"
"example: ./exercise_5-16 -e 2\n");
}
else
{
sort_by_field = true;
field = atoi(argv[++i]);
}
}
}
}
if ((num_lines = read_lines(lines)) >= 0)
{
quick_sort((void**) lines, 0, num_lines - 1,
(int(*)(void*, void*))(sort_numerically ? numeric_cmp : lexicographic_cmp));
write_lines(lines, num_lines);
return 0;
}
else
{
printf("error: input too large to sort\n");
return 1;
}
}
void odt_insert_content(const ustring & directory, const vector < ustring > &text)
{
vector < ustring > odtlines;
ReadText rt(odt_content_xml_filename(directory), true, false);
for (unsigned int i = 0; i < rt.lines.size(); i++) {
if (rt.lines[i].find("</office:text>") == 0) {
for (unsigned int i2 = 0; i2 < text.size(); i2++) {
odtlines.push_back(text[i2]);
}
}
odtlines.push_back(rt.lines[i]);
}
write_lines(odt_content_xml_filename(directory), odtlines);
}
int main()
{
int nlines; /* Number of lines */
char * plines[MAX_LINES]; /* Pointers to lines */
if ((nlines = read_lines(plines, MAX_LINES)) < 0)
{
fprintf(stderr, "Error: Lack of memory. Input is too large.\n");
return 1;
}
my_qsort(plines, 0, nlines-1);
write_lines(plines, nlines);
return 0;
}
void notes_categories_check()
// Check categories are there - if not, create default set.
{
if (!g_file_test(notes_categories_filename().c_str(), G_FILE_TEST_IS_REGULAR)) {
vector < ustring > categories;
categories.push_back(_("No issue"));
categories.push_back(_("For myself"));
categories.push_back(_("For subteam"));
categories.push_back(_("For team"));
categories.push_back(_("For scholar"));
categories.push_back(_("For panel"));
categories.push_back(_("For church"));
categories.push_back(_("For consultant"));
categories.push_back(_("For Bible society"));
write_lines(notes_categories_filename(), categories);
}
}
bool resource_add_name_to_deleted_ones_if_standard_template(const ustring & filename)
/*
If the filename given is a standard template, it adds the name of the resource
to the list of deleted ones and then returns true.
*/
{
ustring directory = gw_path_get_dirname(filename);
if (directory == Directories->get_package_data()) {
ustring deleted_filename = gw_build_filename(Directories->get_resources(), "deleted");
ReadText rt(deleted_filename, true, true);
ustring title = resource_get_title(filename);
rt.lines.push_back(title);
write_lines(deleted_filename, rt.lines);
return true;
}
return false;
}
void notes_store_one_in_file(int id, ustring & note, const ustring & project, const ustring& references, const ustring & category, int date_created, const ustring & user_created, int date_modified, ustring & logbook)
// Stores a note in a file.
// It should be flat files, not xml, because of the merging done by git.
{
// Store the note.
vector <ustring> lines;
// Store date created.
lines.push_back (convert_to_string (date_created));
// Store user who created it.
lines.push_back (user_created);
// Store references.
lines.push_back (references);
// Store category.
lines.push_back (category);
// Store project.
lines.push_back (project);
// Store date modified.
lines.push_back (convert_to_string (date_modified));
// Store note.
lines.push_back (note);
// Store logbook separator.
lines.push_back (notes_logbook_line ());
// Store logbook.
lines.push_back (logbook);
// Write the note. The filename is the note id.
ustring note_filename = notes_file_name (id);
write_lines (note_filename, lines);
// Update the index.
sqlite3 *db;
sqlite3_open(notes_index_filename ().c_str(), &db);
sqlite3_busy_timeout(db, 1000);
notes_store_index_entry (db, id);
sqlite3_close(db);
}
void git_resolve_conflict_chapter(const ustring & project, unsigned int book, unsigned int chapter)
// This solves a conflicting chapter.
{
// Log message
gw_message(_("Resolving conflict for project ") + project + _(" book ") + books_id_to_english(book) + " " + convert_to_string(chapter));
// Directory of the chapter in the data.
ustring directory = project_data_directory_chapter(project, book, chapter);
// Data filename.
ustring datafile = project_data_filename_chapter(project, book, chapter, false);
/* Read the datafile. If there is a conflict it will look like the example below:
\c 1
<<<<<<< HEAD:3 John/1/data
\v 1 my text.
=======
\v 1 server's text.
>>>>>>> a62f843ce41ed2d0325c8a2767993df6acdbc933:3 John/1/data
\v 2
*/
ReadText rt(datafile, true);
// Set about to resolve the conflict.
vector < ustring > newdata;
bool withinmine = false;
bool withinserver = false;
for (unsigned int i = 0; i < rt.lines.size(); i++) {
// Find out when we've a marker, no actual data.
bool minemarker = rt.lines[i].find(git_mine_conflict_marker()) != string::npos;
bool separatormarker = rt.lines[i] == "=======";
bool servermarker = rt.lines[i].find(">>>>>>> ") == 0;
// Do conflict management only if we've actual data.
bool takeit = false;
if (!minemarker && !separatormarker && !servermarker) {
if (withinmine) {
} else if (withinserver) {
takeit = true;
} else {
takeit = true;
}
}
if (takeit) {
newdata.push_back(rt.lines[i]);
} else {
}
// Set whether we're within a conflict, my data, or the server's data.
// This setting applies to the next line of data.
if (minemarker) {
withinmine = true;
withinserver = false;
}
if (separatormarker) {
withinmine = false;
withinserver = true;
}
if (servermarker) {
withinmine = false;
withinserver = false;
}
}
write_lines(datafile, newdata);
// Next time that a timed pull and push is done, the conflict will show up as resolved.
}
void XeTeX::write_document_tex_file ()
{
// Settings.
extern Settings * settings;
ProjectConfiguration *projectconfig = settings->projectconfig(settings->genconfig.project_get());
// Style sheet.
extern Styles * styles;
Stylesheet * sheet = styles->stylesheet (stylesheet_get_actual ());
document_tex.push_back (_("% Configuration file created by Bibledit-Gtk"));
document_tex.push_back (_("% You can modify it to suit your needs"));
document_tex.push_back (_("% After modification, run the following command in this directory:"));
document_tex.push_back (_("% xetex document.tex"));
document_tex.push_back (_("% After that look carefully at the output"));
document_tex.push_back (_("% If it says that a re-run is required, repeat this command"));
document_tex.push_back ("");
document_tex.push_back (_("% Include the ptx2pdf macros"));
document_tex.push_back ("\\input paratext2.tex");
document_tex.push_back ("");
document_tex.push_back (_("% Paper size"));
document_tex.push_back ("\\PaperWidth=" + convert_to_string (settings->genconfig.paper_width_get()) + "cm");
document_tex.push_back ("\\PaperHeight=" + convert_to_string (settings->genconfig.paper_height_get()) + "cm");
if (settings->session.print_crop_marks){
document_tex.push_back ("");
document_tex.push_back (_("% Crop marks"));
document_tex.push_back ("\\CropMarkstrue");
}
document_tex.push_back ("");
document_tex.push_back (_("% The basic unit for the margins; changing this will alter them all"));
document_tex.push_back ("\\MarginUnit=1cm");
document_tex.push_back ("");
document_tex.push_back (_("% Relative sizes of margins, based on the unit above"));
document_tex.push_back ("\\def\\TopMarginFactor{" + convert_to_string (settings->genconfig.paper_top_margin_get()) + "}");
document_tex.push_back ("\\def\\BottomMarginFactor{" + convert_to_string (settings->genconfig.paper_bottom_margin_get()) + "}");
document_tex.push_back ("\\def\\SideMarginFactor{" + convert_to_string (settings->genconfig.paper_outside_margin_get()) + "}");
if (settings->genconfig.paper_inside_margin_get() != settings->genconfig.paper_outside_margin_get()) {
document_tex.push_back ("");
document_tex.push_back (_("% Extra margin for the gutter on the binding side"));
document_tex.push_back ("\\BindingGuttertrue");
document_tex.push_back ("\\BindingGutter=" + convert_to_string (settings->genconfig.paper_inside_margin_get() - settings->genconfig.paper_outside_margin_get()) + "cm");
document_tex.push_back ("");
document_tex.push_back (_("% Double sided printing"));
document_tex.push_back ("\\DoubleSidedtrue");
}
if (!projectconfig->editor_font_default_get()) {
PangoFontDescription *font_desc = pango_font_description_from_string(projectconfig->editor_font_name_get().c_str());
if (font_desc){
// Assemble the string for the font mapping.
ustring font_mapping = projectconfig->xetex_font_mapping_file_get();
if (!font_mapping.empty()) {
if (g_str_has_suffix (font_mapping.c_str(), ".tec")) {
font_mapping = gw_path_get_basename (font_mapping);
// Remove the .tec suffix.
font_mapping.erase (font_mapping.length() - 4, 4);
// Insert the mapping command.
font_mapping.insert (0, "mapping=");
} else {
gw_warning (_("Font mapping file ") + font_mapping + _(" should have the .tec suffix - ignoring this file"));
font_mapping.clear();
}
}
// Assemble the string for the shaping engine.
ustring shaping_engine;
switch (XeTeXScriptingEngineType (projectconfig->xetex_shaping_engine_get())) {
case xtxsetGeneric: break;
case xtxsetArab: shaping_engine = "script=arab"; break;
}
// Assemble the addition to the font.
ustring font_addition;
if (!font_mapping.empty()) {
if (font_addition.empty())
font_addition.append (":");
else
font_addition.append (";");
font_addition.append (font_mapping);
}
if (!shaping_engine.empty()) {
if (font_addition.empty())
font_addition.append (":");
else
font_addition.append (";");
font_addition.append (shaping_engine);
}
ustring font_family = pango_font_description_get_family (font_desc);
document_tex.push_back ("");
document_tex.push_back (_("% Fonts to use for \"plain\", \"bold\", \"italic\", and \"bold italic\" from the stylesheet"));
document_tex.push_back (_("% (they need not really be italic, etc.)"));
document_tex.push_back (_("% Add e.g. \":mapping=farsidigits\" to get digits in Farsi, provided the farsidigits.tec TECkit mapping is available"));
document_tex.push_back (_("% Add e.g. \":script=arab\" to use the arab shaping engine instead of the generic one"));
document_tex.push_back ("\\def\\regular{\"" + font_family + font_addition + "\"}");
document_tex.push_back ("\\def\\bold{\"" + font_family + "/B" + font_addition + "\"}");
document_tex.push_back ("\\def\\italic{\"" + font_family + "/I" + font_addition + "\"}");
document_tex.push_back ("\\def\\bolditalic{\"" + font_family + "/BI" + font_addition + + "\"}");
pango_font_description_free(font_desc);
}
}
if (projectconfig->right_to_left_get()) {
document_tex.push_back ("");
document_tex.push_back (_("% Right-to-left layout mode"));
document_tex.push_back ("\\RTLtrue");
}
document_tex.push_back ("");
document_tex.push_back (_("% The unit for font sizes in the stylesheet; changing this will scale all text proportionately"));
document_tex.push_back ("\\FontSizeUnit=1pt");
document_tex.push_back ("");
document_tex.push_back (_("% Scaling factor used to adjust line spacing, relative to font size"));
double line_spacing_factor = 1.0;
double vertical_space_factor = 1.0;
if (!projectconfig->editor_font_default_get()){
line_spacing_factor = projectconfig->text_line_height_get() / 100;
vertical_space_factor = projectconfig->text_line_height_get() / 100;
}
document_tex.push_back ("\\def\\LineSpacingFactor{" + convert_to_string (line_spacing_factor) + "}");
document_tex.push_back ("\\def\\VerticalSpaceFactor{" + convert_to_string (vertical_space_factor) + "}");
document_tex.push_back ("");
document_tex.push_back (_("% Information to include in the running header (at top of pages, except first)"));
document_tex.push_back (_("% We set the items to print at left/center/right of odd and even pages separately"));
document_tex.push_back (_("% Possible contents:"));
document_tex.push_back (_("% \\rangeref = Scripture reference of the range of text on the page;"));
document_tex.push_back (_("% \\firstref = reference of the first verse on the page)"));
document_tex.push_back (_("% \\lastref = reference of the last verse on the page)"));
document_tex.push_back (_("% \\pagenumber = the page number"));
document_tex.push_back (_("% \\empty = print nothing in this position"));
document_tex.push_back ("\\def\\RHoddleft{\\empty}");
document_tex.push_back ("\\def\\RHoddcenter{\\empty}");
document_tex.push_back ("\\def\\RHoddright{\\rangeref}");
document_tex.push_back ("");
document_tex.push_back ("\\def\\RHevenleft{\\rangeref}");
document_tex.push_back ("\\def\\RHevencenter{\\empty}");
document_tex.push_back ("\\def\\RHevenright{\\empty}");
document_tex.push_back ("");
document_tex.push_back ("\\def\\RHtitleleft{\\empty}");
document_tex.push_back ("\\def\\RHtitlecenter{\\empty}");
document_tex.push_back ("\\def\\RHtitleright{\\empty}");
document_tex.push_back ("");
document_tex.push_back ("\\def\\RFoddcenter{\\pagenumber}");
document_tex.push_back ("\\def\\RFevencenter{\\pagenumber}");
document_tex.push_back ("\\def\\RFtitlecenter{\\pagenumber}");
document_tex.push_back ("");
document_tex.push_back (_("% Whether to include verse number in running head, or only chapter"));
document_tex.push_back ("\\VerseRefstrue");
document_tex.push_back ("");
document_tex.push_back (_("% Whether to skip printing verse number 1 at start of chapter"));
document_tex.push_back ("\\OmitVerseNumberOnetrue");
document_tex.push_back ("");
document_tex.push_back (_("% Whether to use paragraph indent at drop-cap chapter numbers"));
document_tex.push_back (_("% \\IndentAtChaptertrue"));
// Go through the stylesheet looking for note markers.
for (unsigned int i = 0; i < sheet->styles.size(); i++) {
bool retrieve_note_data = false;
StyleV2 * style = sheet->styles[i];
if (style->type == stFootEndNote) {
if ((style->subtype == fentFootnote) || (style->subtype == fentEndnote)) {
retrieve_note_data = true;
}
}
if ((style->type == stFootEndNote) || (style->type == stCrossreference)) {
if (style->subtype == ctCrossreference) {
retrieve_note_data = true;
}
}
if (retrieve_note_data) {
ustring marker = style->marker;
document_tex.push_back ("");
document_tex.push_back (_("% Reformat \\") + marker + " notes as a single paragraph");
document_tex.push_back ("\\ParagraphedNotes{" + marker + "}");
document_tex.push_back ("");
NoteNumberingType note_numbering = NoteNumberingType (style->userint1);
switch (note_numbering) {
case nntNumerical:
document_tex.push_back (_("% Numerical callers for \\") + marker + _(" notes"));
document_tex.push_back ("\\NumericCallers{" + marker + "}");
break;
case nntAlphabetical:
document_tex.push_back (_("% Alphabetical callers for \\") + marker + _(" notes"));
document_tex.push_back ("\\AutoCallers{" + marker+ "}{a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z}");
break;
case nntUserDefined:
ustring autocallers;
for (unsigned int i = 0; i < style->userstring1.size(); i++) {
if (i)
autocallers.append (",");
autocallers.append (style->userstring1.substr (i, 1));
}
if (!autocallers.empty()) {
document_tex.push_back (_("% Special caller sequence for \\") + marker + " notes");
document_tex.push_back ("\\AutoCallers{" + marker+ "}{" + autocallers + "}");
}
break;
}
document_tex.push_back ("");
NoteNumberingRestartType note_restart = NoteNumberingRestartType (style->userint2);
switch (note_restart) {
case nnrtNever:
break;
case nnrtBook:
break;
case nnrtChapter:
break;
}
document_tex.push_back (_("% Reset callers every page for \\") + marker + _(" notes"));
document_tex.push_back ("\\PageResetCallers{" + marker + "}");
document_tex.push_back ("");
document_tex.push_back (_("% Omit callers in the note for \\") + marker + _(" notes"));
document_tex.push_back (_("% \\OmitCallerInNote{") + marker + "}");
}
}
document_tex.push_back ("");
document_tex.push_back (_("% The number of columns"));
document_tex.push_back ("\\TitleColumns=1");
document_tex.push_back ("\\IntroColumns=1");
document_tex.push_back ("\\BodyColumns=2");
document_tex.push_back ("");
document_tex.push_back (_("% The gutter between double cols, relative to font size"));
document_tex.push_back ("\\def\\ColumnGutterFactor{15}");
// Define the Paratext stylesheet to be used as a basis for formatting
write_stylesheet ();
// Write the data and add their filenames.
for (unsigned int i = 0; i < book_ids.size(); i++) {
ustring filename = convert_to_string (book_ids[i]) + " " + books_id_to_english(book_ids[i]) + ".usfm";
replace_text (filename, " ", "_");
write_lines (gw_build_filename (working_directory, filename), book_data[i]);
document_tex.push_back ("\\ptxfile{" + filename + "}");
}
// End of document input.
document_tex.push_back ("\\end");
// Write document.text to file.
write_lines (gw_build_filename (working_directory, "document.tex"), document_tex);
}
void ResourceConverterDialog::on_view_file_button()
{
ustring tempfile = gw_build_filename(Directories->get_temp(), "resource-converter-view-file");
write_lines(tempfile, lines);
gtkw_show_uri (tempfile, false);
}