void PatmosFrameLowering::emitPrologue(MachineFunction &MF) const { // get some references MachineBasicBlock &MBB = MF.front(); MachineFrameInfo *MFI = MF.getFrameInfo(); const TargetInstrInfo *TII = TM.getInstrInfo(); MachineBasicBlock::iterator MBBI = MBB.begin(); DebugLoc dl = MBBI != MBB.end() ? MBBI->getDebugLoc() : DebugLoc(); //---------------------------------------------------------------------------- // Handle the stack cache -- if enabled. if (MFI->getMaxAlignment() > 4) { dbgs() << "Stack alignment "; if (MF.getFunction()) dbgs() << "in " << MF.getFunction()->getName() << " "; dbgs() << "too large (" << MFI->getMaxAlignment() << ").\n"; report_fatal_error("Stack alignment other than 4 byte is not supported"); } // assign some FIs to the stack cache if possible unsigned stackSize = assignFrameObjects(MF, !DisableStackCache); if (!DisableStackCache) { // emit a reserve instruction MachineInstr *MI = emitSTC(MF, MBB, MBBI, Patmos::SRESi); if (MI) MI->setFlag(MachineInstr::FrameSetup); // patch all call sites patchCallSites(MF); } //---------------------------------------------------------------------------- // Handle the shadow stack // Do we need to allocate space on the stack? if (stackSize) { // adjust stack : sp -= stack size if (stackSize <= 0xFFF) { MachineInstr *MI = AddDefaultPred(BuildMI(MBB, MBBI, dl, TII->get(Patmos::SUBi), Patmos::RSP)) .addReg(Patmos::RSP).addImm(stackSize); MI->setFlag(MachineInstr::FrameSetup); } else { MachineInstr *MI = AddDefaultPred(BuildMI(MBB, MBBI, dl, TII->get(Patmos::SUBl), Patmos::RSP)) .addReg(Patmos::RSP).addImm(stackSize); MI->setFlag(MachineInstr::FrameSetup); } } }
void MIRPrinter::convert(ModuleSlotTracker &MST, yaml::MachineFrameInfo &YamlMFI, const MachineFrameInfo &MFI) { YamlMFI.IsFrameAddressTaken = MFI.isFrameAddressTaken(); YamlMFI.IsReturnAddressTaken = MFI.isReturnAddressTaken(); YamlMFI.HasStackMap = MFI.hasStackMap(); YamlMFI.HasPatchPoint = MFI.hasPatchPoint(); YamlMFI.StackSize = MFI.getStackSize(); YamlMFI.OffsetAdjustment = MFI.getOffsetAdjustment(); YamlMFI.MaxAlignment = MFI.getMaxAlignment(); YamlMFI.AdjustsStack = MFI.adjustsStack(); YamlMFI.HasCalls = MFI.hasCalls(); YamlMFI.MaxCallFrameSize = MFI.getMaxCallFrameSize(); YamlMFI.HasOpaqueSPAdjustment = MFI.hasOpaqueSPAdjustment(); YamlMFI.HasVAStart = MFI.hasVAStart(); YamlMFI.HasMustTailInVarArgFunc = MFI.hasMustTailInVarArgFunc(); if (MFI.getSavePoint()) { raw_string_ostream StrOS(YamlMFI.SavePoint.Value); MIPrinter(StrOS, MST, RegisterMaskIds, StackObjectOperandMapping) .printMBBReference(*MFI.getSavePoint()); } if (MFI.getRestorePoint()) { raw_string_ostream StrOS(YamlMFI.RestorePoint.Value); MIPrinter(StrOS, MST, RegisterMaskIds, StackObjectOperandMapping) .printMBBReference(*MFI.getRestorePoint()); } }
/// determineFrameLayout - Determine the size of the frame and maximum call /// frame size. void SPURegisterInfo::determineFrameLayout(MachineFunction &MF) const { MachineFrameInfo *MFI = MF.getFrameInfo(); // Get the number of bytes to allocate from the FrameInfo unsigned FrameSize = MFI->getStackSize(); // Get the alignments provided by the target, and the maximum alignment // (if any) of the fixed frame objects. unsigned TargetAlign = MF.getTarget().getFrameInfo()->getStackAlignment(); unsigned Align = std::max(TargetAlign, MFI->getMaxAlignment()); assert(isPowerOf2_32(Align) && "Alignment is not power of 2"); unsigned AlignMask = Align - 1; // Get the maximum call frame size of all the calls. unsigned maxCallFrameSize = MFI->getMaxCallFrameSize(); // If we have dynamic alloca then maxCallFrameSize needs to be aligned so // that allocations will be aligned. if (MFI->hasVarSizedObjects()) maxCallFrameSize = (maxCallFrameSize + AlignMask) & ~AlignMask; // Update maximum call frame size. MFI->setMaxCallFrameSize(maxCallFrameSize); // Include call frame size in total. FrameSize += maxCallFrameSize; // Make sure the frame is aligned. FrameSize = (FrameSize + AlignMask) & ~AlignMask; // Update frame info. MFI->setStackSize(FrameSize); }
void MIRPrinter::convert(ModuleSlotTracker &MST, yaml::MachineFrameInfo &YamlMFI, const MachineFrameInfo &MFI) { YamlMFI.IsFrameAddressTaken = MFI.isFrameAddressTaken(); YamlMFI.IsReturnAddressTaken = MFI.isReturnAddressTaken(); YamlMFI.HasStackMap = MFI.hasStackMap(); YamlMFI.HasPatchPoint = MFI.hasPatchPoint(); YamlMFI.StackSize = MFI.getStackSize(); YamlMFI.OffsetAdjustment = MFI.getOffsetAdjustment(); YamlMFI.MaxAlignment = MFI.getMaxAlignment(); YamlMFI.AdjustsStack = MFI.adjustsStack(); YamlMFI.HasCalls = MFI.hasCalls(); YamlMFI.MaxCallFrameSize = MFI.isMaxCallFrameSizeComputed() ? MFI.getMaxCallFrameSize() : ~0u; YamlMFI.CVBytesOfCalleeSavedRegisters = MFI.getCVBytesOfCalleeSavedRegisters(); YamlMFI.HasOpaqueSPAdjustment = MFI.hasOpaqueSPAdjustment(); YamlMFI.HasVAStart = MFI.hasVAStart(); YamlMFI.HasMustTailInVarArgFunc = MFI.hasMustTailInVarArgFunc(); YamlMFI.LocalFrameSize = MFI.getLocalFrameSize(); if (MFI.getSavePoint()) { raw_string_ostream StrOS(YamlMFI.SavePoint.Value); StrOS << printMBBReference(*MFI.getSavePoint()); } if (MFI.getRestorePoint()) { raw_string_ostream StrOS(YamlMFI.RestorePoint.Value); StrOS << printMBBReference(*MFI.getRestorePoint()); } }
// Determines the size of the frame and maximum call frame size. void LanaiFrameLowering::determineFrameLayout(MachineFunction &MF) const { MachineFrameInfo *MFI = MF.getFrameInfo(); const LanaiRegisterInfo *LRI = STI.getRegisterInfo(); // Get the number of bytes to allocate from the FrameInfo. unsigned FrameSize = MFI->getStackSize(); // Get the alignment. unsigned StackAlign = LRI->needsStackRealignment(MF) ? MFI->getMaxAlignment() : getStackAlignment(); // Get the maximum call frame size of all the calls. unsigned MaxCallFrameSize = MFI->getMaxCallFrameSize(); // If we have dynamic alloca then MaxCallFrameSize needs to be aligned so // that allocations will be aligned. if (MFI->hasVarSizedObjects()) MaxCallFrameSize = alignTo(MaxCallFrameSize, StackAlign); // Update maximum call frame size. MFI->setMaxCallFrameSize(MaxCallFrameSize); // Include call frame size in total. if (!(hasReservedCallFrame(MF) && MFI->adjustsStack())) FrameSize += MaxCallFrameSize; // Make sure the frame is aligned. FrameSize = alignTo(FrameSize, StackAlign); // Update frame info. MFI->setStackSize(FrameSize); }
void X86RegisterInfo::processFunctionBeforeCalleeSavedScan(MachineFunction &MF, RegScavenger *RS) const { MachineFrameInfo *FFI = MF.getFrameInfo(); // Calculate and set max stack object alignment early, so we can decide // whether we will need stack realignment (and thus FP). unsigned MaxAlign = std::max(FFI->getMaxAlignment(), calculateMaxStackAlignment(FFI)); FFI->setMaxAlignment(MaxAlign); }
void MIRPrinter::convert(yaml::MachineFrameInfo &YamlMFI, const MachineFrameInfo &MFI) { YamlMFI.IsFrameAddressTaken = MFI.isFrameAddressTaken(); YamlMFI.IsReturnAddressTaken = MFI.isReturnAddressTaken(); YamlMFI.HasStackMap = MFI.hasStackMap(); YamlMFI.HasPatchPoint = MFI.hasPatchPoint(); YamlMFI.StackSize = MFI.getStackSize(); YamlMFI.OffsetAdjustment = MFI.getOffsetAdjustment(); YamlMFI.MaxAlignment = MFI.getMaxAlignment(); YamlMFI.AdjustsStack = MFI.adjustsStack(); YamlMFI.HasCalls = MFI.hasCalls(); YamlMFI.MaxCallFrameSize = MFI.getMaxCallFrameSize(); YamlMFI.HasOpaqueSPAdjustment = MFI.hasOpaqueSPAdjustment(); YamlMFI.HasVAStart = MFI.hasVAStart(); YamlMFI.HasMustTailInVarArgFunc = MFI.hasMustTailInVarArgFunc(); }
/// calculateFrameObjectOffsets - Calculate actual frame offsets for all of the /// abstract stack objects. /// void PEI::calculateFrameObjectOffsets(MachineFunction &Fn) { const TargetFrameLowering &TFI = *Fn.getTarget().getFrameLowering(); bool StackGrowsDown = TFI.getStackGrowthDirection() == TargetFrameLowering::StackGrowsDown; // Loop over all of the stack objects, assigning sequential addresses... MachineFrameInfo *MFI = Fn.getFrameInfo(); // Start at the beginning of the local area. // The Offset is the distance from the stack top in the direction // of stack growth -- so it's always nonnegative. int LocalAreaOffset = TFI.getOffsetOfLocalArea(); if (StackGrowsDown) LocalAreaOffset = -LocalAreaOffset; assert(LocalAreaOffset >= 0 && "Local area offset should be in direction of stack growth"); int64_t Offset = LocalAreaOffset; // If there are fixed sized objects that are preallocated in the local area, // non-fixed objects can't be allocated right at the start of local area. // We currently don't support filling in holes in between fixed sized // objects, so we adjust 'Offset' to point to the end of last fixed sized // preallocated object. for (int i = MFI->getObjectIndexBegin(); i != 0; ++i) { int64_t FixedOff; if (StackGrowsDown) { // The maximum distance from the stack pointer is at lower address of // the object -- which is given by offset. For down growing stack // the offset is negative, so we negate the offset to get the distance. FixedOff = -MFI->getObjectOffset(i); } else { // The maximum distance from the start pointer is at the upper // address of the object. FixedOff = MFI->getObjectOffset(i) + MFI->getObjectSize(i); } if (FixedOff > Offset) Offset = FixedOff; } // First assign frame offsets to stack objects that are used to spill // callee saved registers. if (StackGrowsDown) { for (unsigned i = MinCSFrameIndex; i <= MaxCSFrameIndex; ++i) { // If the stack grows down, we need to add the size to find the lowest // address of the object. Offset += MFI->getObjectSize(i); unsigned Align = MFI->getObjectAlignment(i); // Adjust to alignment boundary Offset = (Offset+Align-1)/Align*Align; MFI->setObjectOffset(i, -Offset); // Set the computed offset } } else { int MaxCSFI = MaxCSFrameIndex, MinCSFI = MinCSFrameIndex; for (int i = MaxCSFI; i >= MinCSFI ; --i) { unsigned Align = MFI->getObjectAlignment(i); // Adjust to alignment boundary Offset = (Offset+Align-1)/Align*Align; MFI->setObjectOffset(i, Offset); Offset += MFI->getObjectSize(i); } } unsigned MaxAlign = MFI->getMaxAlignment(); // Make sure the special register scavenging spill slot is closest to the // frame pointer if a frame pointer is required. const TargetRegisterInfo *RegInfo = Fn.getTarget().getRegisterInfo(); if (RS && TFI.hasFP(Fn) && RegInfo->useFPForScavengingIndex(Fn) && !RegInfo->needsStackRealignment(Fn)) { int SFI = RS->getScavengingFrameIndex(); if (SFI >= 0) AdjustStackOffset(MFI, SFI, StackGrowsDown, Offset, MaxAlign); } // FIXME: Once this is working, then enable flag will change to a target // check for whether the frame is large enough to want to use virtual // frame index registers. Functions which don't want/need this optimization // will continue to use the existing code path. if (MFI->getUseLocalStackAllocationBlock()) { unsigned Align = MFI->getLocalFrameMaxAlign(); // Adjust to alignment boundary. Offset = (Offset + Align - 1) / Align * Align; DEBUG(dbgs() << "Local frame base offset: " << Offset << "\n"); // Resolve offsets for objects in the local block. for (unsigned i = 0, e = MFI->getLocalFrameObjectCount(); i != e; ++i) { std::pair<int, int64_t> Entry = MFI->getLocalFrameObjectMap(i); int64_t FIOffset = (StackGrowsDown ? -Offset : Offset) + Entry.second; DEBUG(dbgs() << "alloc FI(" << Entry.first << ") at SP[" << FIOffset << "]\n"); MFI->setObjectOffset(Entry.first, FIOffset); } // Allocate the local block Offset += MFI->getLocalFrameSize(); MaxAlign = std::max(Align, MaxAlign); } // Make sure that the stack protector comes before the local variables on the // stack. SmallSet<int, 16> LargeStackObjs; if (MFI->getStackProtectorIndex() >= 0) { AdjustStackOffset(MFI, MFI->getStackProtectorIndex(), StackGrowsDown, Offset, MaxAlign); // Assign large stack objects first. for (unsigned i = 0, e = MFI->getObjectIndexEnd(); i != e; ++i) { if (MFI->isObjectPreAllocated(i) && MFI->getUseLocalStackAllocationBlock()) continue; if (i >= MinCSFrameIndex && i <= MaxCSFrameIndex) continue; if (RS && (int)i == RS->getScavengingFrameIndex()) continue; if (MFI->isDeadObjectIndex(i)) continue; if (MFI->getStackProtectorIndex() == (int)i) continue; if (!MFI->MayNeedStackProtector(i)) continue; AdjustStackOffset(MFI, i, StackGrowsDown, Offset, MaxAlign); LargeStackObjs.insert(i); } } // Then assign frame offsets to stack objects that are not used to spill // callee saved registers. for (unsigned i = 0, e = MFI->getObjectIndexEnd(); i != e; ++i) { if (MFI->isObjectPreAllocated(i) && MFI->getUseLocalStackAllocationBlock()) continue; if (i >= MinCSFrameIndex && i <= MaxCSFrameIndex) continue; if (RS && (int)i == RS->getScavengingFrameIndex()) continue; if (MFI->isDeadObjectIndex(i)) continue; if (MFI->getStackProtectorIndex() == (int)i) continue; if (LargeStackObjs.count(i)) continue; AdjustStackOffset(MFI, i, StackGrowsDown, Offset, MaxAlign); } // Make sure the special register scavenging spill slot is closest to the // stack pointer. if (RS && (!TFI.hasFP(Fn) || RegInfo->needsStackRealignment(Fn) || !RegInfo->useFPForScavengingIndex(Fn))) { int SFI = RS->getScavengingFrameIndex(); if (SFI >= 0) AdjustStackOffset(MFI, SFI, StackGrowsDown, Offset, MaxAlign); } if (!TFI.targetHandlesStackFrameRounding()) { // If we have reserved argument space for call sites in the function // immediately on entry to the current function, count it as part of the // overall stack size. if (MFI->adjustsStack() && TFI.hasReservedCallFrame(Fn)) Offset += MFI->getMaxCallFrameSize(); // Round up the size to a multiple of the alignment. If the function has // any calls or alloca's, align to the target's StackAlignment value to // ensure that the callee's frame or the alloca data is suitably aligned; // otherwise, for leaf functions, align to the TransientStackAlignment // value. unsigned StackAlign; if (MFI->adjustsStack() || MFI->hasVarSizedObjects() || (RegInfo->needsStackRealignment(Fn) && MFI->getObjectIndexEnd() != 0)) StackAlign = TFI.getStackAlignment(); else StackAlign = TFI.getTransientStackAlignment(); // If the frame pointer is eliminated, all frame offsets will be relative to // SP not FP. Align to MaxAlign so this works. StackAlign = std::max(StackAlign, MaxAlign); unsigned AlignMask = StackAlign - 1; Offset = (Offset + AlignMask) & ~uint64_t(AlignMask); } // Update frame info to pretend that this is part of the stack... int64_t StackSize = Offset - LocalAreaOffset; MFI->setStackSize(StackSize); NumBytesStackSpace += StackSize; }
/// calculateFrameObjectOffsets - Calculate actual frame offsets for all of the /// abstract stack objects. /// void PEI::calculateFrameObjectOffsets(MachineFunction &Fn) { const TargetFrameInfo &TFI = *Fn.getTarget().getFrameInfo(); bool StackGrowsDown = TFI.getStackGrowthDirection() == TargetFrameInfo::StackGrowsDown; // Loop over all of the stack objects, assigning sequential addresses... MachineFrameInfo *MFI = Fn.getFrameInfo(); // Start at the beginning of the local area. // The Offset is the distance from the stack top in the direction // of stack growth -- so it's always nonnegative. int LocalAreaOffset = TFI.getOffsetOfLocalArea(); if (StackGrowsDown) LocalAreaOffset = -LocalAreaOffset; assert(LocalAreaOffset >= 0 && "Local area offset should be in direction of stack growth"); int64_t Offset = LocalAreaOffset; // If there are fixed sized objects that are preallocated in the local area, // non-fixed objects can't be allocated right at the start of local area. // We currently don't support filling in holes in between fixed sized // objects, so we adjust 'Offset' to point to the end of last fixed sized // preallocated object. for (int i = MFI->getObjectIndexBegin(); i != 0; ++i) { int64_t FixedOff; if (StackGrowsDown) { // The maximum distance from the stack pointer is at lower address of // the object -- which is given by offset. For down growing stack // the offset is negative, so we negate the offset to get the distance. FixedOff = -MFI->getObjectOffset(i); } else { // The maximum distance from the start pointer is at the upper // address of the object. FixedOff = MFI->getObjectOffset(i) + MFI->getObjectSize(i); } if (FixedOff > Offset) Offset = FixedOff; } // First assign frame offsets to stack objects that are used to spill // callee saved registers. if (StackGrowsDown) { for (unsigned i = MinCSFrameIndex; i <= MaxCSFrameIndex; ++i) { // If the stack grows down, we need to add the size to find the lowest // address of the object. Offset += MFI->getObjectSize(i); unsigned Align = MFI->getObjectAlignment(i); // Adjust to alignment boundary Offset = (Offset+Align-1)/Align*Align; MFI->setObjectOffset(i, -Offset); // Set the computed offset } } else { int MaxCSFI = MaxCSFrameIndex, MinCSFI = MinCSFrameIndex; for (int i = MaxCSFI; i >= MinCSFI ; --i) { unsigned Align = MFI->getObjectAlignment(i); // Adjust to alignment boundary Offset = (Offset+Align-1)/Align*Align; MFI->setObjectOffset(i, Offset); Offset += MFI->getObjectSize(i); } } unsigned MaxAlign = MFI->getMaxAlignment(); // Make sure the special register scavenging spill slot is closest to the // frame pointer if a frame pointer is required. const TargetRegisterInfo *RegInfo = Fn.getTarget().getRegisterInfo(); if (RS && RegInfo->hasFP(Fn) && !RegInfo->needsStackRealignment(Fn)) { int SFI = RS->getScavengingFrameIndex(); if (SFI >= 0) AdjustStackOffset(MFI, SFI, StackGrowsDown, Offset, MaxAlign); } // Make sure that the stack protector comes before the local variables on the // stack. if (MFI->getStackProtectorIndex() >= 0) AdjustStackOffset(MFI, MFI->getStackProtectorIndex(), StackGrowsDown, Offset, MaxAlign); // Then assign frame offsets to stack objects that are not used to spill // callee saved registers. for (unsigned i = 0, e = MFI->getObjectIndexEnd(); i != e; ++i) { if (i >= MinCSFrameIndex && i <= MaxCSFrameIndex) continue; if (RS && (int)i == RS->getScavengingFrameIndex()) continue; if (MFI->isDeadObjectIndex(i)) continue; if (MFI->getStackProtectorIndex() == (int)i) continue; AdjustStackOffset(MFI, i, StackGrowsDown, Offset, MaxAlign); } // Make sure the special register scavenging spill slot is closest to the // stack pointer. if (RS && (!RegInfo->hasFP(Fn) || RegInfo->needsStackRealignment(Fn))) { int SFI = RS->getScavengingFrameIndex(); if (SFI >= 0) AdjustStackOffset(MFI, SFI, StackGrowsDown, Offset, MaxAlign); } if (!RegInfo->targetHandlesStackFrameRounding()) { // If we have reserved argument space for call sites in the function // immediately on entry to the current function, count it as part of the // overall stack size. if (MFI->adjustsStack() && RegInfo->hasReservedCallFrame(Fn)) Offset += MFI->getMaxCallFrameSize(); // Round up the size to a multiple of the alignment. If the function has // any calls or alloca's, align to the target's StackAlignment value to // ensure that the callee's frame or the alloca data is suitably aligned; // otherwise, for leaf functions, align to the TransientStackAlignment // value. unsigned StackAlign; if (MFI->adjustsStack() || MFI->hasVarSizedObjects() || (RegInfo->needsStackRealignment(Fn) && MFI->getObjectIndexEnd() != 0)) StackAlign = TFI.getStackAlignment(); else StackAlign = TFI.getTransientStackAlignment(); // If the frame pointer is eliminated, all frame offsets will be relative to // SP not FP. Align to MaxAlign so this works. StackAlign = std::max(StackAlign, MaxAlign); unsigned AlignMask = StackAlign - 1; Offset = (Offset + AlignMask) & ~uint64_t(AlignMask); } // Update frame info to pretend that this is part of the stack... MFI->setStackSize(Offset - LocalAreaOffset); }
void MipsSEFrameLowering::emitPrologue(MachineFunction &MF, MachineBasicBlock &MBB) const { assert(&MF.front() == &MBB && "Shrink-wrapping not yet supported"); MachineFrameInfo *MFI = MF.getFrameInfo(); MipsFunctionInfo *MipsFI = MF.getInfo<MipsFunctionInfo>(); const MipsSEInstrInfo &TII = *static_cast<const MipsSEInstrInfo *>(STI.getInstrInfo()); const MipsRegisterInfo &RegInfo = *static_cast<const MipsRegisterInfo *>(STI.getRegisterInfo()); MachineBasicBlock::iterator MBBI = MBB.begin(); DebugLoc dl; MipsABIInfo ABI = STI.getABI(); unsigned SP = ABI.GetStackPtr(); unsigned FP = ABI.GetFramePtr(); unsigned ZERO = ABI.GetNullPtr(); unsigned MOVE = ABI.GetGPRMoveOp(); unsigned ADDiu = ABI.GetPtrAddiuOp(); unsigned AND = ABI.IsN64() ? Mips::AND64 : Mips::AND; const TargetRegisterClass *RC = ABI.ArePtrs64bit() ? &Mips::GPR64RegClass : &Mips::GPR32RegClass; // First, compute final stack size. uint64_t StackSize = MFI->getStackSize(); // No need to allocate space on the stack. if (StackSize == 0 && !MFI->adjustsStack()) return; MachineModuleInfo &MMI = MF.getMMI(); const MCRegisterInfo *MRI = MMI.getContext().getRegisterInfo(); MachineLocation DstML, SrcML; // Adjust stack. TII.adjustStackPtr(SP, -StackSize, MBB, MBBI); // emit ".cfi_def_cfa_offset StackSize" unsigned CFIIndex = MMI.addFrameInst( MCCFIInstruction::createDefCfaOffset(nullptr, -StackSize)); BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) .addCFIIndex(CFIIndex); if (MF.getFunction()->hasFnAttribute("interrupt")) emitInterruptPrologueStub(MF, MBB); const std::vector<CalleeSavedInfo> &CSI = MFI->getCalleeSavedInfo(); if (CSI.size()) { // Find the instruction past the last instruction that saves a callee-saved // register to the stack. for (unsigned i = 0; i < CSI.size(); ++i) ++MBBI; // Iterate over list of callee-saved registers and emit .cfi_offset // directives. for (std::vector<CalleeSavedInfo>::const_iterator I = CSI.begin(), E = CSI.end(); I != E; ++I) { int64_t Offset = MFI->getObjectOffset(I->getFrameIdx()); unsigned Reg = I->getReg(); // If Reg is a double precision register, emit two cfa_offsets, // one for each of the paired single precision registers. if (Mips::AFGR64RegClass.contains(Reg)) { unsigned Reg0 = MRI->getDwarfRegNum(RegInfo.getSubReg(Reg, Mips::sub_lo), true); unsigned Reg1 = MRI->getDwarfRegNum(RegInfo.getSubReg(Reg, Mips::sub_hi), true); if (!STI.isLittle()) std::swap(Reg0, Reg1); unsigned CFIIndex = MMI.addFrameInst( MCCFIInstruction::createOffset(nullptr, Reg0, Offset)); BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) .addCFIIndex(CFIIndex); CFIIndex = MMI.addFrameInst( MCCFIInstruction::createOffset(nullptr, Reg1, Offset + 4)); BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) .addCFIIndex(CFIIndex); } else if (Mips::FGR64RegClass.contains(Reg)) { unsigned Reg0 = MRI->getDwarfRegNum(Reg, true); unsigned Reg1 = MRI->getDwarfRegNum(Reg, true) + 1; if (!STI.isLittle()) std::swap(Reg0, Reg1); unsigned CFIIndex = MMI.addFrameInst( MCCFIInstruction::createOffset(nullptr, Reg0, Offset)); BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) .addCFIIndex(CFIIndex); CFIIndex = MMI.addFrameInst( MCCFIInstruction::createOffset(nullptr, Reg1, Offset + 4)); BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) .addCFIIndex(CFIIndex); } else { // Reg is either in GPR32 or FGR32. unsigned CFIIndex = MMI.addFrameInst(MCCFIInstruction::createOffset( nullptr, MRI->getDwarfRegNum(Reg, 1), Offset)); BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) .addCFIIndex(CFIIndex); } } } if (MipsFI->callsEhReturn()) { // Insert instructions that spill eh data registers. for (int I = 0; I < 4; ++I) { if (!MBB.isLiveIn(ABI.GetEhDataReg(I))) MBB.addLiveIn(ABI.GetEhDataReg(I)); TII.storeRegToStackSlot(MBB, MBBI, ABI.GetEhDataReg(I), false, MipsFI->getEhDataRegFI(I), RC, &RegInfo); } // Emit .cfi_offset directives for eh data registers. for (int I = 0; I < 4; ++I) { int64_t Offset = MFI->getObjectOffset(MipsFI->getEhDataRegFI(I)); unsigned Reg = MRI->getDwarfRegNum(ABI.GetEhDataReg(I), true); unsigned CFIIndex = MMI.addFrameInst( MCCFIInstruction::createOffset(nullptr, Reg, Offset)); BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) .addCFIIndex(CFIIndex); } } // if framepointer enabled, set it to point to the stack pointer. if (hasFP(MF)) { // Insert instruction "move $fp, $sp" at this location. BuildMI(MBB, MBBI, dl, TII.get(MOVE), FP).addReg(SP).addReg(ZERO) .setMIFlag(MachineInstr::FrameSetup); // emit ".cfi_def_cfa_register $fp" unsigned CFIIndex = MMI.addFrameInst(MCCFIInstruction::createDefCfaRegister( nullptr, MRI->getDwarfRegNum(FP, true))); BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) .addCFIIndex(CFIIndex); if (RegInfo.needsStackRealignment(MF)) { // addiu $Reg, $zero, -MaxAlignment // andi $sp, $sp, $Reg unsigned VR = MF.getRegInfo().createVirtualRegister(RC); assert(isInt<16>(MFI->getMaxAlignment()) && "Function's alignment size requirement is not supported."); int MaxAlign = - (signed) MFI->getMaxAlignment(); BuildMI(MBB, MBBI, dl, TII.get(ADDiu), VR).addReg(ZERO) .addImm(MaxAlign); BuildMI(MBB, MBBI, dl, TII.get(AND), SP).addReg(SP).addReg(VR); if (hasBP(MF)) { // move $s7, $sp unsigned BP = STI.isABI_N64() ? Mips::S7_64 : Mips::S7; BuildMI(MBB, MBBI, dl, TII.get(MOVE), BP) .addReg(SP) .addReg(ZERO); } } } }
void XCoreFrameLowering::emitPrologue(MachineFunction &MF, MachineBasicBlock &MBB) const { assert(&MF.front() == &MBB && "Shrink-wrapping not yet supported"); MachineBasicBlock::iterator MBBI = MBB.begin(); MachineFrameInfo *MFI = MF.getFrameInfo(); MachineModuleInfo *MMI = &MF.getMMI(); const MCRegisterInfo *MRI = MMI->getContext().getRegisterInfo(); const XCoreInstrInfo &TII = *MF.getSubtarget<XCoreSubtarget>().getInstrInfo(); XCoreFunctionInfo *XFI = MF.getInfo<XCoreFunctionInfo>(); // Debug location must be unknown since the first debug location is used // to determine the end of the prologue. DebugLoc dl; if (MFI->getMaxAlignment() > getStackAlignment()) report_fatal_error("emitPrologue unsupported alignment: " + Twine(MFI->getMaxAlignment())); const AttributeSet &PAL = MF.getFunction()->getAttributes(); if (PAL.hasAttrSomewhere(Attribute::Nest)) BuildMI(MBB, MBBI, dl, TII.get(XCore::LDWSP_ru6), XCore::R11).addImm(0); // FIX: Needs addMemOperand() but can't use getFixedStack() or getStack(). // Work out frame sizes. // We will adjust the SP in stages towards the final FrameSize. assert(MFI->getStackSize()%4 == 0 && "Misaligned frame size"); const int FrameSize = MFI->getStackSize() / 4; int Adjusted = 0; bool saveLR = XFI->hasLRSpillSlot(); bool UseENTSP = saveLR && FrameSize && (MFI->getObjectOffset(XFI->getLRSpillSlot()) == 0); if (UseENTSP) saveLR = false; bool FP = hasFP(MF); bool emitFrameMoves = XCoreRegisterInfo::needsFrameMoves(MF); if (UseENTSP) { // Allocate space on the stack at the same time as saving LR. Adjusted = (FrameSize > MaxImmU16) ? MaxImmU16 : FrameSize; int Opcode = isImmU6(Adjusted) ? XCore::ENTSP_u6 : XCore::ENTSP_lu6; MBB.addLiveIn(XCore::LR); MachineInstrBuilder MIB = BuildMI(MBB, MBBI, dl, TII.get(Opcode)); MIB.addImm(Adjusted); MIB->addRegisterKilled(XCore::LR, MF.getSubtarget().getRegisterInfo(), true); if (emitFrameMoves) { EmitDefCfaOffset(MBB, MBBI, dl, TII, MMI, Adjusted*4); unsigned DRegNum = MRI->getDwarfRegNum(XCore::LR, true); EmitCfiOffset(MBB, MBBI, dl, TII, MMI, DRegNum, 0); } } // If necessary, save LR and FP to the stack, as we EXTSP. SmallVector<StackSlotInfo,2> SpillList; GetSpillList(SpillList, MFI, XFI, saveLR, FP); // We want the nearest (negative) offsets first, so reverse list. std::reverse(SpillList.begin(), SpillList.end()); for (unsigned i = 0, e = SpillList.size(); i != e; ++i) { assert(SpillList[i].Offset % 4 == 0 && "Misaligned stack offset"); assert(SpillList[i].Offset <= 0 && "Unexpected positive stack offset"); int OffsetFromTop = - SpillList[i].Offset/4; IfNeededExtSP(MBB, MBBI, dl, TII, MMI, OffsetFromTop, Adjusted, FrameSize, emitFrameMoves); int Offset = Adjusted - OffsetFromTop; int Opcode = isImmU6(Offset) ? XCore::STWSP_ru6 : XCore::STWSP_lru6; MBB.addLiveIn(SpillList[i].Reg); BuildMI(MBB, MBBI, dl, TII.get(Opcode)) .addReg(SpillList[i].Reg, RegState::Kill) .addImm(Offset) .addMemOperand(getFrameIndexMMO(MBB, SpillList[i].FI, MachineMemOperand::MOStore)); if (emitFrameMoves) { unsigned DRegNum = MRI->getDwarfRegNum(SpillList[i].Reg, true); EmitCfiOffset(MBB, MBBI, dl, TII, MMI, DRegNum, SpillList[i].Offset); } } // Complete any remaining Stack adjustment. IfNeededExtSP(MBB, MBBI, dl, TII, MMI, FrameSize, Adjusted, FrameSize, emitFrameMoves); assert(Adjusted==FrameSize && "IfNeededExtSP has not completed adjustment"); if (FP) { // Set the FP from the SP. BuildMI(MBB, MBBI, dl, TII.get(XCore::LDAWSP_ru6), FramePtr).addImm(0); if (emitFrameMoves) EmitDefCfaRegister(MBB, MBBI, dl, TII, MMI, MRI->getDwarfRegNum(FramePtr, true)); } if (emitFrameMoves) { // Frame moves for callee saved. for (const auto &SpillLabel : XFI->getSpillLabels()) { MachineBasicBlock::iterator Pos = SpillLabel.first; ++Pos; const CalleeSavedInfo &CSI = SpillLabel.second; int Offset = MFI->getObjectOffset(CSI.getFrameIdx()); unsigned DRegNum = MRI->getDwarfRegNum(CSI.getReg(), true); EmitCfiOffset(MBB, Pos, dl, TII, MMI, DRegNum, Offset); } if (XFI->hasEHSpillSlot()) { // The unwinder requires stack slot & CFI offsets for the exception info. // We do not save/spill these registers. SmallVector<StackSlotInfo,2> SpillList; GetEHSpillList(SpillList, MFI, XFI, MF.getSubtarget().getTargetLowering()); assert(SpillList.size()==2 && "Unexpected SpillList size"); EmitCfiOffset(MBB, MBBI, dl, TII, MMI, MRI->getDwarfRegNum(SpillList[0].Reg, true), SpillList[0].Offset); EmitCfiOffset(MBB, MBBI, dl, TII, MMI, MRI->getDwarfRegNum(SpillList[1].Reg, true), SpillList[1].Offset); } } }
void XCoreFrameLowering::emitPrologue(MachineFunction &MF) const { MachineBasicBlock &MBB = MF.front(); // Prolog goes in entry BB MachineBasicBlock::iterator MBBI = MBB.begin(); MachineFrameInfo *MFI = MF.getFrameInfo(); MachineModuleInfo *MMI = &MF.getMMI(); const MCRegisterInfo *MRI = MMI->getContext().getRegisterInfo(); const XCoreInstrInfo &TII = *static_cast<const XCoreInstrInfo*>(MF.getTarget().getInstrInfo()); XCoreFunctionInfo *XFI = MF.getInfo<XCoreFunctionInfo>(); DebugLoc dl = MBBI != MBB.end() ? MBBI->getDebugLoc() : DebugLoc(); if (MFI->getMaxAlignment() > getStackAlignment()) report_fatal_error("emitPrologue unsupported alignment: " + Twine(MFI->getMaxAlignment())); const AttributeSet &PAL = MF.getFunction()->getAttributes(); if (PAL.hasAttrSomewhere(Attribute::Nest)) BuildMI(MBB, MBBI, dl, TII.get(XCore::LDWSP_ru6), XCore::R11).addImm(0); // Work out frame sizes. // We will adjust the SP in stages towards the final FrameSize. assert(MFI->getStackSize()%4 == 0 && "Misaligned frame size"); const int FrameSize = MFI->getStackSize() / 4; int Adjusted = 0; bool saveLR = XFI->getUsesLR(); bool UseENTSP = saveLR && FrameSize && (MFI->getObjectOffset(XFI->getLRSpillSlot()) == 0); if (UseENTSP) saveLR = false; bool FP = hasFP(MF); bool emitFrameMoves = XCoreRegisterInfo::needsFrameMoves(MF); if (UseENTSP) { // Allocate space on the stack at the same time as saving LR. Adjusted = (FrameSize > MaxImmU16) ? MaxImmU16 : FrameSize; int Opcode = isImmU6(Adjusted) ? XCore::ENTSP_u6 : XCore::ENTSP_lu6; BuildMI(MBB, MBBI, dl, TII.get(Opcode)).addImm(Adjusted); MBB.addLiveIn(XCore::LR); if (emitFrameMoves) { EmitDefCfaOffset(MBB, MBBI, dl, TII, MMI, Adjusted*4); unsigned DRegNum = MRI->getDwarfRegNum(XCore::LR, true); EmitCfiOffset(MBB, MBBI, dl, TII, MMI, DRegNum, 0, NULL); } } // If necessary, save LR and FP to the stack, as we EXTSP. SmallVector<std::pair<unsigned,int>,2> SpillList; GetSpillList(SpillList, MFI, XFI, saveLR, FP); for (unsigned i = 0, e = SpillList.size(); i != e; ++i) { unsigned SpillReg = SpillList[i].first; int SpillOffset = SpillList[i].second; assert(SpillOffset % 4 == 0 && "Misaligned stack offset"); assert(SpillOffset <= 0 && "Unexpected positive stack offset"); int OffsetFromTop = - SpillOffset/4; IfNeededExtSP(MBB, MBBI, dl, TII, MMI, OffsetFromTop, Adjusted, FrameSize, emitFrameMoves); int Offset = Adjusted - OffsetFromTop; int Opcode = isImmU6(Offset) ? XCore::STWSP_ru6 : XCore::STWSP_lru6; BuildMI(MBB, MBBI, dl, TII.get(Opcode)).addReg(SpillReg).addImm(Offset); MBB.addLiveIn(SpillReg); if (emitFrameMoves) { unsigned DRegNum = MRI->getDwarfRegNum(SpillReg, true); EmitCfiOffset(MBB, MBBI, dl, TII, MMI, DRegNum, SpillOffset, NULL); } } // Complete any remaining Stack adjustment. IfNeededExtSP(MBB, MBBI, dl, TII, MMI, FrameSize, Adjusted, FrameSize, emitFrameMoves); assert(Adjusted==FrameSize && "IfNeededExtSP has not completed adjustment"); if (FP) { // Set the FP from the SP. BuildMI(MBB, MBBI, dl, TII.get(XCore::LDAWSP_ru6), FramePtr).addImm(0); if (emitFrameMoves) EmitDefCfaRegister(MBB, MBBI, dl, TII, MMI, MRI->getDwarfRegNum(FramePtr, true)); } if (emitFrameMoves) { // Frame moves for callee saved. std::vector<std::pair<MCSymbol*, CalleeSavedInfo> >&SpillLabels = XFI->getSpillLabels(); for (unsigned I = 0, E = SpillLabels.size(); I != E; ++I) { MCSymbol *SpillLabel = SpillLabels[I].first; CalleeSavedInfo &CSI = SpillLabels[I].second; int Offset = MFI->getObjectOffset(CSI.getFrameIdx()); unsigned DRegNum = MRI->getDwarfRegNum(CSI.getReg(), true); EmitCfiOffset(MBB, MBBI, dl, TII, MMI, DRegNum, Offset, SpillLabel); } } }
void ARMFrameLowering::emitPrologue(MachineFunction &MF) const { MachineBasicBlock &MBB = MF.front(); MachineBasicBlock::iterator MBBI = MBB.begin(); MachineFrameInfo *MFI = MF.getFrameInfo(); ARMFunctionInfo *AFI = MF.getInfo<ARMFunctionInfo>(); const ARMBaseRegisterInfo *RegInfo = static_cast<const ARMBaseRegisterInfo*>(MF.getTarget().getRegisterInfo()); const ARMBaseInstrInfo &TII = *static_cast<const ARMBaseInstrInfo*>(MF.getTarget().getInstrInfo()); assert(!AFI->isThumb1OnlyFunction() && "This emitPrologue does not support Thumb1!"); bool isARM = !AFI->isThumbFunction(); unsigned VARegSaveSize = AFI->getVarArgsRegSaveSize(); unsigned NumBytes = MFI->getStackSize(); const std::vector<CalleeSavedInfo> &CSI = MFI->getCalleeSavedInfo(); DebugLoc dl = MBBI != MBB.end() ? MBBI->getDebugLoc() : DebugLoc(); unsigned FramePtr = RegInfo->getFrameRegister(MF); // Determine the sizes of each callee-save spill areas and record which frame // belongs to which callee-save spill areas. unsigned GPRCS1Size = 0, GPRCS2Size = 0, DPRCSSize = 0; int FramePtrSpillFI = 0; // Allocate the vararg register save area. This is not counted in NumBytes. if (VARegSaveSize) emitSPUpdate(isARM, MBB, MBBI, dl, TII, -VARegSaveSize, MachineInstr::FrameSetup); if (!AFI->hasStackFrame()) { if (NumBytes != 0) emitSPUpdate(isARM, MBB, MBBI, dl, TII, -NumBytes, MachineInstr::FrameSetup); return; } for (unsigned i = 0, e = CSI.size(); i != e; ++i) { unsigned Reg = CSI[i].getReg(); int FI = CSI[i].getFrameIdx(); switch (Reg) { case ARM::R4: case ARM::R5: case ARM::R6: case ARM::R7: case ARM::LR: if (Reg == FramePtr) FramePtrSpillFI = FI; AFI->addGPRCalleeSavedArea1Frame(FI); GPRCS1Size += 4; break; case ARM::R8: case ARM::R9: case ARM::R10: case ARM::R11: if (Reg == FramePtr) FramePtrSpillFI = FI; if (STI.isTargetDarwin()) { AFI->addGPRCalleeSavedArea2Frame(FI); GPRCS2Size += 4; } else { AFI->addGPRCalleeSavedArea1Frame(FI); GPRCS1Size += 4; } break; default: AFI->addDPRCalleeSavedAreaFrame(FI); DPRCSSize += 8; } } // Move past area 1. if (GPRCS1Size > 0) MBBI++; // Set FP to point to the stack slot that contains the previous FP. // For Darwin, FP is R7, which has now been stored in spill area 1. // Otherwise, if this is not Darwin, all the callee-saved registers go // into spill area 1, including the FP in R11. In either case, it is // now safe to emit this assignment. bool HasFP = hasFP(MF); if (HasFP) { unsigned ADDriOpc = !AFI->isThumbFunction() ? ARM::ADDri : ARM::t2ADDri; MachineInstrBuilder MIB = BuildMI(MBB, MBBI, dl, TII.get(ADDriOpc), FramePtr) .addFrameIndex(FramePtrSpillFI).addImm(0) .setMIFlag(MachineInstr::FrameSetup); AddDefaultCC(AddDefaultPred(MIB)); } // Move past area 2. if (GPRCS2Size > 0) MBBI++; // Determine starting offsets of spill areas. unsigned DPRCSOffset = NumBytes - (GPRCS1Size + GPRCS2Size + DPRCSSize); unsigned GPRCS2Offset = DPRCSOffset + DPRCSSize; unsigned GPRCS1Offset = GPRCS2Offset + GPRCS2Size; if (HasFP) AFI->setFramePtrSpillOffset(MFI->getObjectOffset(FramePtrSpillFI) + NumBytes); AFI->setGPRCalleeSavedArea1Offset(GPRCS1Offset); AFI->setGPRCalleeSavedArea2Offset(GPRCS2Offset); AFI->setDPRCalleeSavedAreaOffset(DPRCSOffset); // Move past area 3. if (DPRCSSize > 0) { MBBI++; // Since vpush register list cannot have gaps, there may be multiple vpush // instructions in the prologue. while (MBBI->getOpcode() == ARM::VSTMDDB_UPD) MBBI++; } NumBytes = DPRCSOffset; if (NumBytes) { // Adjust SP after all the callee-save spills. emitSPUpdate(isARM, MBB, MBBI, dl, TII, -NumBytes, MachineInstr::FrameSetup); if (HasFP && isARM) // Restore from fp only in ARM mode: e.g. sub sp, r7, #24 // Note it's not safe to do this in Thumb2 mode because it would have // taken two instructions: // mov sp, r7 // sub sp, #24 // If an interrupt is taken between the two instructions, then sp is in // an inconsistent state (pointing to the middle of callee-saved area). // The interrupt handler can end up clobbering the registers. AFI->setShouldRestoreSPFromFP(true); } if (STI.isTargetELF() && hasFP(MF)) MFI->setOffsetAdjustment(MFI->getOffsetAdjustment() - AFI->getFramePtrSpillOffset()); AFI->setGPRCalleeSavedArea1Size(GPRCS1Size); AFI->setGPRCalleeSavedArea2Size(GPRCS2Size); AFI->setDPRCalleeSavedAreaSize(DPRCSSize); // If we need dynamic stack realignment, do it here. Be paranoid and make // sure if we also have VLAs, we have a base pointer for frame access. if (RegInfo->needsStackRealignment(MF)) { unsigned MaxAlign = MFI->getMaxAlignment(); assert (!AFI->isThumb1OnlyFunction()); if (!AFI->isThumbFunction()) { // Emit bic sp, sp, MaxAlign AddDefaultCC(AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::BICri), ARM::SP) .addReg(ARM::SP, RegState::Kill) .addImm(MaxAlign-1))); } else { // We cannot use sp as source/dest register here, thus we're emitting the // following sequence: // mov r4, sp // bic r4, r4, MaxAlign // mov sp, r4 // FIXME: It will be better just to find spare register here. AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), ARM::R4) .addReg(ARM::SP, RegState::Kill)); AddDefaultCC(AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::t2BICri), ARM::R4) .addReg(ARM::R4, RegState::Kill) .addImm(MaxAlign-1))); AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), ARM::SP) .addReg(ARM::R4, RegState::Kill)); } AFI->setShouldRestoreSPFromFP(true); } // If we need a base pointer, set it up here. It's whatever the value // of the stack pointer is at this point. Any variable size objects // will be allocated after this, so we can still use the base pointer // to reference locals. // FIXME: Clarify FrameSetup flags here. if (RegInfo->hasBasePointer(MF)) { if (isARM) BuildMI(MBB, MBBI, dl, TII.get(ARM::MOVr), RegInfo->getBaseRegister()) .addReg(ARM::SP) .addImm((unsigned)ARMCC::AL).addReg(0).addReg(0); else AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVr), RegInfo->getBaseRegister()) .addReg(ARM::SP)); } // If the frame has variable sized objects then the epilogue must restore // the sp from fp. We can assume there's an FP here since hasFP already // checks for hasVarSizedObjects. if (MFI->hasVarSizedObjects()) AFI->setShouldRestoreSPFromFP(true); }
/// emitPrologue - Push callee-saved registers onto the stack, which /// automatically adjust the stack pointer. Adjust the stack pointer to allocate /// space for local variables. Also emit labels used by the exception handler to /// generate the exception handling frames. void X86FrameInfo::emitPrologue(MachineFunction &MF) const { MachineBasicBlock &MBB = MF.front(); // Prologue goes in entry BB. MachineBasicBlock::iterator MBBI = MBB.begin(); MachineFrameInfo *MFI = MF.getFrameInfo(); const Function *Fn = MF.getFunction(); const X86RegisterInfo *RegInfo = TM.getRegisterInfo(); const X86InstrInfo &TII = *TM.getInstrInfo(); MachineModuleInfo &MMI = MF.getMMI(); X86MachineFunctionInfo *X86FI = MF.getInfo<X86MachineFunctionInfo>(); bool needsFrameMoves = MMI.hasDebugInfo() || !Fn->doesNotThrow() || UnwindTablesMandatory; uint64_t MaxAlign = MFI->getMaxAlignment(); // Desired stack alignment. uint64_t StackSize = MFI->getStackSize(); // Number of bytes to allocate. bool HasFP = hasFP(MF); bool Is64Bit = STI.is64Bit(); bool IsWin64 = STI.isTargetWin64(); unsigned StackAlign = getStackAlignment(); unsigned SlotSize = RegInfo->getSlotSize(); unsigned FramePtr = RegInfo->getFrameRegister(MF); unsigned StackPtr = RegInfo->getStackRegister(); DebugLoc DL; // If we're forcing a stack realignment we can't rely on just the frame // info, we need to know the ABI stack alignment as well in case we // have a call out. Otherwise just make sure we have some alignment - we'll // go with the minimum SlotSize. if (ForceStackAlign) { if (MFI->hasCalls()) MaxAlign = (StackAlign > MaxAlign) ? StackAlign : MaxAlign; else if (MaxAlign < SlotSize) MaxAlign = SlotSize; } // Add RETADDR move area to callee saved frame size. int TailCallReturnAddrDelta = X86FI->getTCReturnAddrDelta(); if (TailCallReturnAddrDelta < 0) X86FI->setCalleeSavedFrameSize( X86FI->getCalleeSavedFrameSize() - TailCallReturnAddrDelta); // If this is x86-64 and the Red Zone is not disabled, if we are a leaf // function, and use up to 128 bytes of stack space, don't have a frame // pointer, calls, or dynamic alloca then we do not need to adjust the // stack pointer (we fit in the Red Zone). if (Is64Bit && !Fn->hasFnAttr(Attribute::NoRedZone) && !RegInfo->needsStackRealignment(MF) && !MFI->hasVarSizedObjects() && // No dynamic alloca. !MFI->adjustsStack() && // No calls. !IsWin64) { // Win64 has no Red Zone uint64_t MinSize = X86FI->getCalleeSavedFrameSize(); if (HasFP) MinSize += SlotSize; StackSize = std::max(MinSize, StackSize > 128 ? StackSize - 128 : 0); MFI->setStackSize(StackSize); } else if (IsWin64) { // We need to always allocate 32 bytes as register spill area. // FIXME: We might reuse these 32 bytes for leaf functions. StackSize += 32; MFI->setStackSize(StackSize); } // Insert stack pointer adjustment for later moving of return addr. Only // applies to tail call optimized functions where the callee argument stack // size is bigger than the callers. if (TailCallReturnAddrDelta < 0) { MachineInstr *MI = BuildMI(MBB, MBBI, DL, TII.get(getSUBriOpcode(Is64Bit, -TailCallReturnAddrDelta)), StackPtr) .addReg(StackPtr) .addImm(-TailCallReturnAddrDelta); MI->getOperand(3).setIsDead(); // The EFLAGS implicit def is dead. } // Mapping for machine moves: // // DST: VirtualFP AND // SRC: VirtualFP => DW_CFA_def_cfa_offset // ELSE => DW_CFA_def_cfa // // SRC: VirtualFP AND // DST: Register => DW_CFA_def_cfa_register // // ELSE // OFFSET < 0 => DW_CFA_offset_extended_sf // REG < 64 => DW_CFA_offset + Reg // ELSE => DW_CFA_offset_extended std::vector<MachineMove> &Moves = MMI.getFrameMoves(); const TargetData *TD = MF.getTarget().getTargetData(); uint64_t NumBytes = 0; int stackGrowth = -TD->getPointerSize(); if (HasFP) { // Calculate required stack adjustment. uint64_t FrameSize = StackSize - SlotSize; if (RegInfo->needsStackRealignment(MF)) FrameSize = (FrameSize + MaxAlign - 1) / MaxAlign * MaxAlign; NumBytes = FrameSize - X86FI->getCalleeSavedFrameSize(); // Get the offset of the stack slot for the EBP register, which is // guaranteed to be the last slot by processFunctionBeforeFrameFinalized. // Update the frame offset adjustment. MFI->setOffsetAdjustment(-NumBytes); // Save EBP/RBP into the appropriate stack slot. BuildMI(MBB, MBBI, DL, TII.get(Is64Bit ? X86::PUSH64r : X86::PUSH32r)) .addReg(FramePtr, RegState::Kill); if (needsFrameMoves) { // Mark the place where EBP/RBP was saved. MCSymbol *FrameLabel = MMI.getContext().CreateTempSymbol(); BuildMI(MBB, MBBI, DL, TII.get(X86::PROLOG_LABEL)).addSym(FrameLabel); // Define the current CFA rule to use the provided offset. if (StackSize) { MachineLocation SPDst(MachineLocation::VirtualFP); MachineLocation SPSrc(MachineLocation::VirtualFP, 2 * stackGrowth); Moves.push_back(MachineMove(FrameLabel, SPDst, SPSrc)); } else { // FIXME: Verify & implement for FP MachineLocation SPDst(StackPtr); MachineLocation SPSrc(StackPtr, stackGrowth); Moves.push_back(MachineMove(FrameLabel, SPDst, SPSrc)); } // Change the rule for the FramePtr to be an "offset" rule. MachineLocation FPDst(MachineLocation::VirtualFP, 2 * stackGrowth); MachineLocation FPSrc(FramePtr); Moves.push_back(MachineMove(FrameLabel, FPDst, FPSrc)); } // Update EBP with the new base value... BuildMI(MBB, MBBI, DL, TII.get(Is64Bit ? X86::MOV64rr : X86::MOV32rr), FramePtr) .addReg(StackPtr); if (needsFrameMoves) { // Mark effective beginning of when frame pointer becomes valid. MCSymbol *FrameLabel = MMI.getContext().CreateTempSymbol(); BuildMI(MBB, MBBI, DL, TII.get(X86::PROLOG_LABEL)).addSym(FrameLabel); // Define the current CFA to use the EBP/RBP register. MachineLocation FPDst(FramePtr); MachineLocation FPSrc(MachineLocation::VirtualFP); Moves.push_back(MachineMove(FrameLabel, FPDst, FPSrc)); } // Mark the FramePtr as live-in in every block except the entry. for (MachineFunction::iterator I = llvm::next(MF.begin()), E = MF.end(); I != E; ++I) I->addLiveIn(FramePtr); // Realign stack if (RegInfo->needsStackRealignment(MF)) { MachineInstr *MI = BuildMI(MBB, MBBI, DL, TII.get(Is64Bit ? X86::AND64ri32 : X86::AND32ri), StackPtr).addReg(StackPtr).addImm(-MaxAlign); // The EFLAGS implicit def is dead. MI->getOperand(3).setIsDead(); } } else { NumBytes = StackSize - X86FI->getCalleeSavedFrameSize(); } // Skip the callee-saved push instructions. bool PushedRegs = false; int StackOffset = 2 * stackGrowth; while (MBBI != MBB.end() && (MBBI->getOpcode() == X86::PUSH32r || MBBI->getOpcode() == X86::PUSH64r)) { PushedRegs = true; ++MBBI; if (!HasFP && needsFrameMoves) { // Mark callee-saved push instruction. MCSymbol *Label = MMI.getContext().CreateTempSymbol(); BuildMI(MBB, MBBI, DL, TII.get(X86::PROLOG_LABEL)).addSym(Label); // Define the current CFA rule to use the provided offset. unsigned Ptr = StackSize ? MachineLocation::VirtualFP : StackPtr; MachineLocation SPDst(Ptr); MachineLocation SPSrc(Ptr, StackOffset); Moves.push_back(MachineMove(Label, SPDst, SPSrc)); StackOffset += stackGrowth; } } DL = MBB.findDebugLoc(MBBI); // If there is an SUB32ri of ESP immediately before this instruction, merge // the two. This can be the case when tail call elimination is enabled and // the callee has more arguments then the caller. NumBytes -= mergeSPUpdates(MBB, MBBI, StackPtr, true); // If there is an ADD32ri or SUB32ri of ESP immediately after this // instruction, merge the two instructions. mergeSPUpdatesDown(MBB, MBBI, StackPtr, &NumBytes); // Adjust stack pointer: ESP -= numbytes. // Windows and cygwin/mingw require a prologue helper routine when allocating // more than 4K bytes on the stack. Windows uses __chkstk and cygwin/mingw // uses __alloca. __alloca and the 32-bit version of __chkstk will probe the // stack and adjust the stack pointer in one go. The 64-bit version of // __chkstk is only responsible for probing the stack. The 64-bit prologue is // responsible for adjusting the stack pointer. Touching the stack at 4K // increments is necessary to ensure that the guard pages used by the OS // virtual memory manager are allocated in correct sequence. if (NumBytes >= 4096 && (STI.isTargetCygMing() || STI.isTargetWin32())) { // Check whether EAX is livein for this function. bool isEAXAlive = isEAXLiveIn(MF); const char *StackProbeSymbol = STI.isTargetWindows() ? "_chkstk" : "_alloca"; unsigned CallOp = Is64Bit ? X86::CALL64pcrel32 : X86::CALLpcrel32; if (!isEAXAlive) { BuildMI(MBB, MBBI, DL, TII.get(X86::MOV32ri), X86::EAX) .addImm(NumBytes); BuildMI(MBB, MBBI, DL, TII.get(CallOp)) .addExternalSymbol(StackProbeSymbol) .addReg(StackPtr, RegState::Define | RegState::Implicit) .addReg(X86::EFLAGS, RegState::Define | RegState::Implicit); } else { // Save EAX BuildMI(MBB, MBBI, DL, TII.get(X86::PUSH32r)) .addReg(X86::EAX, RegState::Kill); // Allocate NumBytes-4 bytes on stack. We'll also use 4 already // allocated bytes for EAX. BuildMI(MBB, MBBI, DL, TII.get(X86::MOV32ri), X86::EAX) .addImm(NumBytes - 4); BuildMI(MBB, MBBI, DL, TII.get(CallOp)) .addExternalSymbol(StackProbeSymbol) .addReg(StackPtr, RegState::Define | RegState::Implicit) .addReg(X86::EFLAGS, RegState::Define | RegState::Implicit); // Restore EAX MachineInstr *MI = addRegOffset(BuildMI(MF, DL, TII.get(X86::MOV32rm), X86::EAX), StackPtr, false, NumBytes - 4); MBB.insert(MBBI, MI); } } else if (NumBytes >= 4096 && STI.isTargetWin64()) { // Sanity check that EAX is not livein for this function. It should // should not be, so throw an assert. assert(!isEAXLiveIn(MF) && "EAX is livein in the Win64 case!"); // Handle the 64-bit Windows ABI case where we need to call __chkstk. // Function prologue is responsible for adjusting the stack pointer. BuildMI(MBB, MBBI, DL, TII.get(X86::MOV32ri), X86::EAX) .addImm(NumBytes); BuildMI(MBB, MBBI, DL, TII.get(X86::WINCALL64pcrel32)) .addExternalSymbol("__chkstk") .addReg(StackPtr, RegState::Define | RegState::Implicit); emitSPUpdate(MBB, MBBI, StackPtr, -(int64_t)NumBytes, Is64Bit, TII); } else if (NumBytes) emitSPUpdate(MBB, MBBI, StackPtr, -(int64_t)NumBytes, Is64Bit, TII); if ((NumBytes || PushedRegs) && needsFrameMoves) { // Mark end of stack pointer adjustment. MCSymbol *Label = MMI.getContext().CreateTempSymbol(); BuildMI(MBB, MBBI, DL, TII.get(X86::PROLOG_LABEL)).addSym(Label); if (!HasFP && NumBytes) { // Define the current CFA rule to use the provided offset. if (StackSize) { MachineLocation SPDst(MachineLocation::VirtualFP); MachineLocation SPSrc(MachineLocation::VirtualFP, -StackSize + stackGrowth); Moves.push_back(MachineMove(Label, SPDst, SPSrc)); } else { // FIXME: Verify & implement for FP MachineLocation SPDst(StackPtr); MachineLocation SPSrc(StackPtr, stackGrowth); Moves.push_back(MachineMove(Label, SPDst, SPSrc)); } } // Emit DWARF info specifying the offsets of the callee-saved registers. if (PushedRegs) emitCalleeSavedFrameMoves(MF, Label, HasFP ? FramePtr : StackPtr); } }
/// calculateFrameObjectOffsets - Calculate actual frame offsets for all of the /// abstract stack objects. /// void PEI::calculateFrameObjectOffsets(MachineFunction &Fn) { const TargetFrameLowering &TFI = *Fn.getSubtarget().getFrameLowering(); StackProtector *SP = &getAnalysis<StackProtector>(); bool StackGrowsDown = TFI.getStackGrowthDirection() == TargetFrameLowering::StackGrowsDown; // Loop over all of the stack objects, assigning sequential addresses... MachineFrameInfo *MFI = Fn.getFrameInfo(); // Start at the beginning of the local area. // The Offset is the distance from the stack top in the direction // of stack growth -- so it's always nonnegative. int LocalAreaOffset = TFI.getOffsetOfLocalArea(); if (StackGrowsDown) LocalAreaOffset = -LocalAreaOffset; assert(LocalAreaOffset >= 0 && "Local area offset should be in direction of stack growth"); int64_t Offset = LocalAreaOffset; // Skew to be applied to alignment. unsigned Skew = TFI.getStackAlignmentSkew(Fn); // If there are fixed sized objects that are preallocated in the local area, // non-fixed objects can't be allocated right at the start of local area. // We currently don't support filling in holes in between fixed sized // objects, so we adjust 'Offset' to point to the end of last fixed sized // preallocated object. for (int i = MFI->getObjectIndexBegin(); i != 0; ++i) { int64_t FixedOff; if (StackGrowsDown) { // The maximum distance from the stack pointer is at lower address of // the object -- which is given by offset. For down growing stack // the offset is negative, so we negate the offset to get the distance. FixedOff = -MFI->getObjectOffset(i); } else { // The maximum distance from the start pointer is at the upper // address of the object. FixedOff = MFI->getObjectOffset(i) + MFI->getObjectSize(i); } if (FixedOff > Offset) Offset = FixedOff; } // First assign frame offsets to stack objects that are used to spill // callee saved registers. if (StackGrowsDown) { for (unsigned i = MinCSFrameIndex; i <= MaxCSFrameIndex; ++i) { // If the stack grows down, we need to add the size to find the lowest // address of the object. Offset += MFI->getObjectSize(i); unsigned Align = MFI->getObjectAlignment(i); // Adjust to alignment boundary Offset = alignTo(Offset, Align, Skew); DEBUG(dbgs() << "alloc FI(" << i << ") at SP[" << -Offset << "]\n"); MFI->setObjectOffset(i, -Offset); // Set the computed offset } } else { int MaxCSFI = MaxCSFrameIndex, MinCSFI = MinCSFrameIndex; for (int i = MaxCSFI; i >= MinCSFI ; --i) { unsigned Align = MFI->getObjectAlignment(i); // Adjust to alignment boundary Offset = alignTo(Offset, Align, Skew); DEBUG(dbgs() << "alloc FI(" << i << ") at SP[" << Offset << "]\n"); MFI->setObjectOffset(i, Offset); Offset += MFI->getObjectSize(i); } } unsigned MaxAlign = MFI->getMaxAlignment(); // Make sure the special register scavenging spill slot is closest to the // incoming stack pointer if a frame pointer is required and is closer // to the incoming rather than the final stack pointer. const TargetRegisterInfo *RegInfo = Fn.getSubtarget().getRegisterInfo(); bool EarlyScavengingSlots = (TFI.hasFP(Fn) && TFI.isFPCloseToIncomingSP() && RegInfo->useFPForScavengingIndex(Fn) && !RegInfo->needsStackRealignment(Fn)); if (RS && EarlyScavengingSlots) { SmallVector<int, 2> SFIs; RS->getScavengingFrameIndices(SFIs); for (SmallVectorImpl<int>::iterator I = SFIs.begin(), IE = SFIs.end(); I != IE; ++I) AdjustStackOffset(MFI, *I, StackGrowsDown, Offset, MaxAlign, Skew); } // FIXME: Once this is working, then enable flag will change to a target // check for whether the frame is large enough to want to use virtual // frame index registers. Functions which don't want/need this optimization // will continue to use the existing code path. if (MFI->getUseLocalStackAllocationBlock()) { unsigned Align = MFI->getLocalFrameMaxAlign(); // Adjust to alignment boundary. Offset = alignTo(Offset, Align, Skew); DEBUG(dbgs() << "Local frame base offset: " << Offset << "\n"); // Resolve offsets for objects in the local block. for (unsigned i = 0, e = MFI->getLocalFrameObjectCount(); i != e; ++i) { std::pair<int, int64_t> Entry = MFI->getLocalFrameObjectMap(i); int64_t FIOffset = (StackGrowsDown ? -Offset : Offset) + Entry.second; DEBUG(dbgs() << "alloc FI(" << Entry.first << ") at SP[" << FIOffset << "]\n"); MFI->setObjectOffset(Entry.first, FIOffset); } // Allocate the local block Offset += MFI->getLocalFrameSize(); MaxAlign = std::max(Align, MaxAlign); } // Make sure that the stack protector comes before the local variables on the // stack. SmallSet<int, 16> ProtectedObjs; if (MFI->getStackProtectorIndex() >= 0) { StackObjSet LargeArrayObjs; StackObjSet SmallArrayObjs; StackObjSet AddrOfObjs; AdjustStackOffset(MFI, MFI->getStackProtectorIndex(), StackGrowsDown, Offset, MaxAlign, Skew); // Assign large stack objects first. for (unsigned i = 0, e = MFI->getObjectIndexEnd(); i != e; ++i) { if (MFI->isObjectPreAllocated(i) && MFI->getUseLocalStackAllocationBlock()) continue; if (i >= MinCSFrameIndex && i <= MaxCSFrameIndex) continue; if (RS && RS->isScavengingFrameIndex((int)i)) continue; if (MFI->isDeadObjectIndex(i)) continue; if (MFI->getStackProtectorIndex() == (int)i) continue; switch (SP->getSSPLayout(MFI->getObjectAllocation(i))) { case StackProtector::SSPLK_None: continue; case StackProtector::SSPLK_SmallArray: SmallArrayObjs.insert(i); continue; case StackProtector::SSPLK_AddrOf: AddrOfObjs.insert(i); continue; case StackProtector::SSPLK_LargeArray: LargeArrayObjs.insert(i); continue; } llvm_unreachable("Unexpected SSPLayoutKind."); } AssignProtectedObjSet(LargeArrayObjs, ProtectedObjs, MFI, StackGrowsDown, Offset, MaxAlign, Skew); AssignProtectedObjSet(SmallArrayObjs, ProtectedObjs, MFI, StackGrowsDown, Offset, MaxAlign, Skew); AssignProtectedObjSet(AddrOfObjs, ProtectedObjs, MFI, StackGrowsDown, Offset, MaxAlign, Skew); } SmallVector<int, 8> ObjectsToAllocate; int EHRegNodeFrameIndex = INT_MAX; if (const WinEHFuncInfo *FuncInfo = Fn.getWinEHFuncInfo()) EHRegNodeFrameIndex = FuncInfo->EHRegNodeFrameIndex; // Then prepare to assign frame offsets to stack objects that are not used to // spill callee saved registers. for (unsigned i = 0, e = MFI->getObjectIndexEnd(); i != e; ++i) { if (MFI->isObjectPreAllocated(i) && MFI->getUseLocalStackAllocationBlock()) continue; if (i >= MinCSFrameIndex && i <= MaxCSFrameIndex) continue; if (RS && RS->isScavengingFrameIndex((int)i)) continue; if (MFI->isDeadObjectIndex(i)) continue; if (MFI->getStackProtectorIndex() == (int)i) continue; if (EHRegNodeFrameIndex == (int)i) continue; if (ProtectedObjs.count(i)) continue; // Add the objects that we need to allocate to our working set. ObjectsToAllocate.push_back(i); } // Allocate the EH registration node first if one is present. if (EHRegNodeFrameIndex != INT_MAX) AdjustStackOffset(MFI, EHRegNodeFrameIndex, StackGrowsDown, Offset, MaxAlign, Skew); // Give the targets a chance to order the objects the way they like it. if (Fn.getTarget().getOptLevel() != CodeGenOpt::None && Fn.getTarget().Options.StackSymbolOrdering) TFI.orderFrameObjects(Fn, ObjectsToAllocate); // Now walk the objects and actually assign base offsets to them. for (auto &Object : ObjectsToAllocate) AdjustStackOffset(MFI, Object, StackGrowsDown, Offset, MaxAlign, Skew); // Make sure the special register scavenging spill slot is closest to the // stack pointer. if (RS && !EarlyScavengingSlots) { SmallVector<int, 2> SFIs; RS->getScavengingFrameIndices(SFIs); for (SmallVectorImpl<int>::iterator I = SFIs.begin(), IE = SFIs.end(); I != IE; ++I) AdjustStackOffset(MFI, *I, StackGrowsDown, Offset, MaxAlign, Skew); } if (!TFI.targetHandlesStackFrameRounding()) { // If we have reserved argument space for call sites in the function // immediately on entry to the current function, count it as part of the // overall stack size. if (MFI->adjustsStack() && TFI.hasReservedCallFrame(Fn)) Offset += MFI->getMaxCallFrameSize(); // Round up the size to a multiple of the alignment. If the function has // any calls or alloca's, align to the target's StackAlignment value to // ensure that the callee's frame or the alloca data is suitably aligned; // otherwise, for leaf functions, align to the TransientStackAlignment // value. unsigned StackAlign; if (MFI->adjustsStack() || MFI->hasVarSizedObjects() || (RegInfo->needsStackRealignment(Fn) && MFI->getObjectIndexEnd() != 0)) StackAlign = TFI.getStackAlignment(); else StackAlign = TFI.getTransientStackAlignment(); // If the frame pointer is eliminated, all frame offsets will be relative to // SP not FP. Align to MaxAlign so this works. StackAlign = std::max(StackAlign, MaxAlign); Offset = alignTo(Offset, StackAlign, Skew); } // Update frame info to pretend that this is part of the stack... int64_t StackSize = Offset - LocalAreaOffset; MFI->setStackSize(StackSize); NumBytesStackSpace += StackSize; }
void X86RegisterInfo::emitPrologue(MachineFunction &MF) const { MachineBasicBlock &MBB = MF.front(); // Prolog goes in entry BB MachineFrameInfo *MFI = MF.getFrameInfo(); const Function* Fn = MF.getFunction(); const X86Subtarget* Subtarget = &MF.getTarget().getSubtarget<X86Subtarget>(); MachineModuleInfo *MMI = MFI->getMachineModuleInfo(); X86MachineFunctionInfo *X86FI = MF.getInfo<X86MachineFunctionInfo>(); MachineBasicBlock::iterator MBBI = MBB.begin(); bool needsFrameMoves = (MMI && MMI->hasDebugInfo()) || !Fn->doesNotThrow() || UnwindTablesMandatory; // Prepare for frame info. unsigned FrameLabelId = 0; // Get the number of bytes to allocate from the FrameInfo. uint64_t StackSize = MFI->getStackSize(); // Get desired stack alignment uint64_t MaxAlign = MFI->getMaxAlignment(); // Add RETADDR move area to callee saved frame size. int TailCallReturnAddrDelta = X86FI->getTCReturnAddrDelta(); if (TailCallReturnAddrDelta < 0) X86FI->setCalleeSavedFrameSize( X86FI->getCalleeSavedFrameSize() +(-TailCallReturnAddrDelta)); // If this is x86-64 and the Red Zone is not disabled, if we are a leaf // function, and use up to 128 bytes of stack space, don't have a frame // pointer, calls, or dynamic alloca then we do not need to adjust the // stack pointer (we fit in the Red Zone). if (Is64Bit && !DisableRedZone && !needsStackRealignment(MF) && !MFI->hasVarSizedObjects() && // No dynamic alloca. !MFI->hasCalls()) { // No calls. uint64_t MinSize = X86FI->getCalleeSavedFrameSize(); if (hasFP(MF)) MinSize += SlotSize; StackSize = std::max(MinSize, StackSize > 128 ? StackSize - 128 : 0); MFI->setStackSize(StackSize); } // Insert stack pointer adjustment for later moving of return addr. Only // applies to tail call optimized functions where the callee argument stack // size is bigger than the callers. if (TailCallReturnAddrDelta < 0) { MachineInstr *MI = BuildMI(MBB, MBBI, TII.get(Is64Bit? X86::SUB64ri32 : X86::SUB32ri), StackPtr).addReg(StackPtr).addImm(-TailCallReturnAddrDelta); // The EFLAGS implicit def is dead. MI->getOperand(3).setIsDead(); } uint64_t NumBytes = 0; if (hasFP(MF)) { // Calculate required stack adjustment uint64_t FrameSize = StackSize - SlotSize; if (needsStackRealignment(MF)) FrameSize = (FrameSize + MaxAlign - 1)/MaxAlign*MaxAlign; NumBytes = FrameSize - X86FI->getCalleeSavedFrameSize(); // Get the offset of the stack slot for the EBP register... which is // guaranteed to be the last slot by processFunctionBeforeFrameFinalized. // Update the frame offset adjustment. MFI->setOffsetAdjustment(-NumBytes); // Save EBP into the appropriate stack slot... BuildMI(MBB, MBBI, TII.get(Is64Bit ? X86::PUSH64r : X86::PUSH32r)) .addReg(FramePtr, /*isDef=*/false, /*isImp=*/false, /*isKill=*/true); if (needsFrameMoves) { // Mark effective beginning of when frame pointer becomes valid. FrameLabelId = MMI->NextLabelID(); BuildMI(MBB, MBBI, TII.get(X86::DBG_LABEL)).addImm(FrameLabelId); } // Update EBP with the new base value... BuildMI(MBB, MBBI, TII.get(Is64Bit ? X86::MOV64rr : X86::MOV32rr), FramePtr) .addReg(StackPtr); // Mark the FramePtr as live-in in every block except the entry. for (MachineFunction::iterator I = next(MF.begin()), E = MF.end(); I != E; ++I) I->addLiveIn(FramePtr); // Realign stack if (needsStackRealignment(MF)) { MachineInstr *MI = BuildMI(MBB, MBBI, TII.get(Is64Bit ? X86::AND64ri32 : X86::AND32ri), StackPtr).addReg(StackPtr).addImm(-MaxAlign); // The EFLAGS implicit def is dead. MI->getOperand(3).setIsDead(); } } else NumBytes = StackSize - X86FI->getCalleeSavedFrameSize(); unsigned ReadyLabelId = 0; if (needsFrameMoves) { // Mark effective beginning of when frame pointer is ready. ReadyLabelId = MMI->NextLabelID(); BuildMI(MBB, MBBI, TII.get(X86::DBG_LABEL)).addImm(ReadyLabelId); } // Skip the callee-saved push instructions. while (MBBI != MBB.end() && (MBBI->getOpcode() == X86::PUSH32r || MBBI->getOpcode() == X86::PUSH64r)) ++MBBI; if (NumBytes) { // adjust stack pointer: ESP -= numbytes if (NumBytes >= 4096 && Subtarget->isTargetCygMing()) { // Check, whether EAX is livein for this function bool isEAXAlive = false; for (MachineRegisterInfo::livein_iterator II = MF.getRegInfo().livein_begin(), EE = MF.getRegInfo().livein_end(); (II != EE) && !isEAXAlive; ++II) { unsigned Reg = II->first; isEAXAlive = (Reg == X86::EAX || Reg == X86::AX || Reg == X86::AH || Reg == X86::AL); } // Function prologue calls _alloca to probe the stack when allocating // more than 4k bytes in one go. Touching the stack at 4K increments is // necessary to ensure that the guard pages used by the OS virtual memory // manager are allocated in correct sequence. if (!isEAXAlive) { BuildMI(MBB, MBBI, TII.get(X86::MOV32ri), X86::EAX).addImm(NumBytes); BuildMI(MBB, MBBI, TII.get(X86::CALLpcrel32)) .addExternalSymbol("_alloca"); } else { // Save EAX BuildMI(MBB, MBBI, TII.get(X86::PUSH32r)) .addReg(X86::EAX, /*isDef=*/false, /*isImp=*/false, /*isKill=*/true); // Allocate NumBytes-4 bytes on stack. We'll also use 4 already // allocated bytes for EAX. BuildMI(MBB, MBBI, TII.get(X86::MOV32ri), X86::EAX).addImm(NumBytes-4); BuildMI(MBB, MBBI, TII.get(X86::CALLpcrel32)) .addExternalSymbol("_alloca"); // Restore EAX MachineInstr *MI = addRegOffset(BuildMI(MF, TII.get(X86::MOV32rm),X86::EAX), StackPtr, false, NumBytes-4); MBB.insert(MBBI, MI); } } else { // If there is an SUB32ri of ESP immediately before this instruction, // merge the two. This can be the case when tail call elimination is // enabled and the callee has more arguments then the caller. NumBytes -= mergeSPUpdates(MBB, MBBI, StackPtr, true); // If there is an ADD32ri or SUB32ri of ESP immediately after this // instruction, merge the two instructions. mergeSPUpdatesDown(MBB, MBBI, StackPtr, &NumBytes); if (NumBytes) emitSPUpdate(MBB, MBBI, StackPtr, -(int64_t)NumBytes, Is64Bit, TII); } } if (needsFrameMoves) emitFrameMoves(MF, FrameLabelId, ReadyLabelId); }