void EditPatchMod::DoVertWeld()
{
ModContextList mcList;
INodeTab nodes;
TimeValue t = ip->GetTime();
int holdNeeded = 0;
BOOL hadSel = FALSE;
if (!ip)
return;
ip->GetModContexts(mcList, nodes);
ClearPatchDataFlag(mcList, EPD_BEENDONE);
theHold.Begin();
RecordTopologyTags();
for (int i = 0; i < mcList.Count(); i++)
{
BOOL altered = FALSE;
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
if (patchData->GetFlag(EPD_BEENDONE))
continue;
// If the mesh isn't yet cache, this will cause it to get cached.
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(t, rpatch);
if (!patch)
continue;
patchData->RecordTopologyTags(patch);
// If this is the first edit, then the delta arrays will be allocated
patchData->BeginEdit(t);
// If any bits are set in the selection set, let's DO IT!!
if (patch->vertSel.NumberSet() > 1)
{
hadSel = TRUE;
if (theHold.Holding())
theHold.Put(new PatchRestore(patchData, this, patch, rpatch, "DoVertWeld"));
// Call the patch weld function
if (patch->Weld(weldThreshold))
{
rpatch->Weld (patch);
altered = holdNeeded = TRUE;
patchData->UpdateChanges(patch, rpatch);
patchData->TempData(this)->Invalidate(PART_TOPO);
}
}
patchData->SetFlag(EPD_BEENDONE, TRUE);
}
if (holdNeeded)
{
ResolveTopoChanges();
theHold.Accept(GetString(IDS_TH_VERTWELD));
}
else
{
if (!hadSel)
ip->DisplayTempPrompt(GetString(IDS_TH_NOVERTSSEL), PROMPT_TIME);
else
ip->DisplayTempPrompt(GetString(IDS_TH_NOWELDPERFORMED), PROMPT_TIME);
theHold.End();
}
nodes.DisposeTemporary();
ClearPatchDataFlag(mcList, EPD_BEENDONE);
NotifyDependents(FOREVER, PART_TOPO, REFMSG_CHANGE);
ip->RedrawViews(ip->GetTime(), REDRAW_NORMAL);
}
int EditPatchMod::DoAttach(INode *node, PatchMesh *attPatch, RPatchMesh *rattPatch, bool & canUndo)
{
ModContextList mcList;
INodeTab nodes;
if (!ip)
return 0;
ip->GetModContexts(mcList, nodes);
if (mcList.Count() != 1)
{
nodes.DisposeTemporary();
return 0;
}
EditPatchData *patchData =(EditPatchData*)mcList[0]->localData;
if (!patchData)
{
nodes.DisposeTemporary();
return 0;
}
patchData->BeginEdit(ip->GetTime());
// If the mesh isn't yet cached, this will cause it to get cached.
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(ip->GetTime(), rpatch);
if (!patch)
{
nodes.DisposeTemporary();
return 0;
}
patchData->RecordTopologyTags(patch);
RecordTopologyTags();
// Transform the shape for attachment:
// If reorienting, just translate to align pivots
// Otherwise, transform to match our transform
Matrix3 attMat(1);
if (attachReorient)
{
Matrix3 thisTM = nodes[0]->GetNodeTM(ip->GetTime());
Matrix3 thisOTMBWSM = nodes[0]->GetObjTMBeforeWSM(ip->GetTime());
Matrix3 thisPivTM = thisTM * Inverse(thisOTMBWSM);
Matrix3 otherTM = node->GetNodeTM(ip->GetTime());
Matrix3 otherOTMBWSM = node->GetObjTMBeforeWSM(ip->GetTime());
Matrix3 otherPivTM = otherTM * Inverse(otherOTMBWSM);
Point3 otherObjOffset = node->GetObjOffsetPos();
attMat = Inverse(otherPivTM) * thisPivTM;
}
else
{
attMat = node->GetObjectTM(ip->GetTime()) *
Inverse(nodes[0]->GetObjectTM(ip->GetTime()));
}
// RB 3-17-96 : Check for mirroring
AffineParts parts;
decomp_affine(attMat, &parts);
if (parts.f < 0.0f)
{
int v[8], ct, ct2, j;
Point3 p[9];
for (int i = 0; i < attPatch->numPatches; i++)
{
// Re-order rpatch
if (attPatch->patches[i].type == PATCH_QUAD)
{
UI_PATCH rpatch=rattPatch->getUIPatch (i);
int ctU=rpatch.NbTilesU<<1;
int ctV=rpatch.NbTilesV<<1;
int nU;
for (nU=0; nU<ctU; nU++)
{
for (int nV=0; nV<ctV; nV++)
{
rattPatch->getUIPatch (i).getTileDesc (nU+nV*ctU)=rpatch.getTileDesc (ctU-1-nU+(ctV-1-nV)*ctU);
}
}
for (nU=0; nU<ctU+1; nU++)
{
for (int nV=0; nV<ctV+1; nV++)
{
rattPatch->getUIPatch (i).setColor (nU+nV*(ctU+1), rpatch.getColor (ctU-nU+(ctV-nV)*ctU));
}
}
}
// Re-order vertices
ct = attPatch->patches[i].type == PATCH_QUAD ? 4 : 3;
for (j = 0; j < ct; j++)
{
v[j] = attPatch->patches[i].v[j];
}
for (j = 0; j < ct; j++)
{
attPatch->patches[i].v[j] = v[ct - j - 1];
}
// Re-order vecs
ct = attPatch->patches[i].type == PATCH_QUAD ? 8 : 6;
ct2 = attPatch->patches[i].type == PATCH_QUAD ? 5 : 3;
for (j = 0; j < ct; j++)
{
v[j] = attPatch->patches[i].vec[j];
}
for (j = 0; j < ct; j++, ct2--)
{
if (ct2 < 0)
ct2 = ct - 1;
attPatch->patches[i].vec[j] = v[ct2];
}
// Re-order enteriors
if (attPatch->patches[i].type == PATCH_QUAD)
{
ct = 4;
for (j = 0; j < ct; j++)
{
v[j] = attPatch->patches[i].interior[j];
}
for (j = 0; j < ct; j++)
{
attPatch->patches[i].interior[j] = v[ct - j - 1];
}
}
// Re-order aux
if (attPatch->patches[i].type == PATCH_TRI)
{
ct = 9;
for (j = 0; j < ct; j++)
{
p[j] = attPatch->patches[i].aux[j];
}
for (j = 0; j < ct; j++)
{
attPatch->patches[i].aux[j] = p[ct - j - 1];
}
}
// Re-order TV faces if present
for (int chan = 0; chan < patch->getNumMaps(); ++chan)
{
if (attPatch->tvPatches[chan])
{
ct = 4;
for (j = 0; j < ct; j++)
{
v[j] = attPatch->tvPatches[chan][i].tv[j];
}
for (j = 0; j < ct; j++)
{
attPatch->tvPatches[chan][i].tv[j] = v[ct - j - 1];
}
}
}
}
}
int i;
for (i = 0; i < attPatch->numVerts; ++i)
attPatch->verts[i].p = attPatch->verts[i].p * attMat;
for (i = 0; i < attPatch->numVecs; ++i)
attPatch->vecs[i].p = attPatch->vecs[i].p * attMat;
attPatch->computeInteriors();
theHold.Begin();
// Combine the materials of the two nodes.
int mat2Offset = 0;
Mtl *m1 = nodes[0]->GetMtl();
Mtl *m2 = node->GetMtl();
bool condenseMe = FALSE;
if (m1 && m2 &&(m1 != m2))
{
if (attachMat == ATTACHMAT_IDTOMAT)
{
int ct = 1;
if (m1->IsMultiMtl())
ct = m1->NumSubMtls();
for (int i = 0; i < patch->numPatches; ++i)
{
int mtid = patch->getPatchMtlIndex(i);
if (mtid >= ct)
patch->setPatchMtlIndex(i, mtid % ct);
}
FitPatchIDsToMaterial(*attPatch, m2);
if (condenseMat)
condenseMe = TRUE;
}
// the theHold calls here were a vain attempt to make this all undoable.
// This should be revisited in the future so we don't have to use the SYSSET_CLEAR_UNDO.
theHold.Suspend();
if (attachMat == ATTACHMAT_MATTOID)
{
m1 = FitMaterialToPatchIDs(*patch, m1);
m2 = FitMaterialToPatchIDs(*attPatch, m2);
}
Mtl *multi = CombineMaterials(m1, m2, mat2Offset);
if (attachMat == ATTACHMAT_NEITHER)
mat2Offset = 0;
theHold.Resume();
// We can't be in face subobject mode, else we screw up the materials:
DWORD oldSL = patch->selLevel;
DWORD roldSL = patch->selLevel;
patch->selLevel = PATCH_OBJECT;
rpatch->SetSelLevel (EP_OBJECT);
nodes[0]->SetMtl(multi);
patch->selLevel = oldSL;
rpatch->SetSelLevel (roldSL);
m1 = multi;
canUndo = FALSE; // Absolutely cannot undo material combinations.
}
if (!m1 && m2)
{
// We can't be in face subobject mode, else we screw up the materials:
DWORD oldSL = patch->selLevel;
DWORD roldSL = rpatch->GetSelLevel();
patch->selLevel = PATCH_OBJECT;
rpatch->SetSelLevel (EP_OBJECT);
nodes[0]->SetMtl(m2);
patch->selLevel = oldSL;
rpatch->SetSelLevel (roldSL);
m1 = m2;
}
// Start a restore object...
if (theHold.Holding())
theHold.Put(new PatchRestore(patchData, this, patch, rpatch, "DoAttach"));
// Do the attach
patch->Attach(attPatch, mat2Offset);
rpatch->Attach(rattPatch, *patch);
patchData->UpdateChanges(patch, rpatch);
patchData->TempData(this)->Invalidate(PART_TOPO | PART_GEOM);
// Get rid of the original node
ip->DeleteNode(node);
ResolveTopoChanges();
theHold.Accept(GetString(IDS_TH_ATTACH));
if (m1 && condenseMe)
{
// Following clears undo stack.
patch = patchData->TempData(this)->GetPatch(ip->GetTime(), rpatch);
m1 = CondenseMatAssignments(*patch, m1);
}
nodes.DisposeTemporary();
ClearPatchDataFlag(mcList, EPD_BEENDONE);
NotifyDependents(FOREVER, PART_TOPO | PART_GEOM, REFMSG_CHANGE);
ip->RedrawViews(ip->GetTime(), REDRAW_NORMAL);
return 1;
}
void EditPatchMod::ActivateSubobjSel(int level, XFormModes& modes)
{
ModContextList mcList;
INodeTab nodes;
int old = selLevel;
if (!ip)
return;
ip->GetModContexts(mcList, nodes);
selLevel = level;
// 3-10-99 watje
if (level != EP_PATCH)
{
if (ip->GetCommandMode() == bevelMode)
ip->SetStdCommandMode(CID_OBJMOVE);
if (ip->GetCommandMode() == extrudeMode)
ip->SetStdCommandMode(CID_OBJMOVE);
if (inBevel)
{
ISpinnerControl *spin;
spin = GetISpinner(GetDlgItem(hOpsPanel, IDC_EP_OUTLINESPINNER));
if (spin)
{
HWND hWnd = spin->GetHwnd();
SendMessage(hWnd, WM_LBUTTONUP, 0, 0);
ReleaseISpinner(spin);
}
}
if (inExtrude)
{
ISpinnerControl *spin;
spin = GetISpinner(GetDlgItem(hOpsPanel, IDC_EP_EXTRUDESPINNER));
if (spin)
{
HWND hWnd = spin->GetHwnd();
SendMessage(hWnd, WM_LBUTTONUP, 0, 0);
ReleaseISpinner(spin);
}
}
}
if (level != EP_VERTEX)
{
if (ip->GetCommandMode() == bindMode)
ip->SetStdCommandMode(CID_OBJMOVE);
}
switch (level)
{
case EP_OBJECT:
// Not imp.
break;
case EP_PATCH:
modes = XFormModes(moveMode, rotMode, nuscaleMode, uscaleMode, squashMode, selectMode);
break;
case EP_EDGE:
modes = XFormModes(moveMode, rotMode, nuscaleMode, uscaleMode, squashMode, selectMode);
break;
case EP_VERTEX:
modes = XFormModes(moveMode, rotMode, nuscaleMode, uscaleMode, squashMode, selectMode);
break;
case EP_TILE:
modes = XFormModes(NULL, NULL, NULL, NULL, NULL, selectMode);
break;
}
if (selLevel != old)
{
SetSubobjectLevel(level);
// Modify the caches to reflect the new sel level.
for (int i = 0; i < mcList.Count(); i++)
{
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
if (patchData->tempData && patchData->TempData(this)->PatchCached(ip->GetTime()))
{
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(ip->GetTime(), rpatch);
if (patch)
{
if (selLevel == EP_VERTEX)
patch->dispFlags = DISP_VERTS;
else
patch->dispFlags = 0;
if (displayLattice)
patch->SetDispFlag(DISP_LATTICE);
patch->SetDispFlag(patchLevelDispFlags[selLevel]);
patch->selLevel = patchLevel[selLevel];
rpatch->SetSelLevel (selLevel);
}
}
}
NotifyDependents(FOREVER, PART_SUBSEL_TYPE | PART_DISPLAY, REFMSG_CHANGE);
ip->PipeSelLevelChanged();
// Update selection UI display, named sel
SelectionChanged();
}
nodes.DisposeTemporary();
}
void EditPatchMod::DoAddHook(PatchMesh *pMesh, int vert0, int vert1, int vert2, int seg, int config)
{
ModContextList mcList;
INodeTab nodes;
TimeValue t = ip->GetTime();
BOOL holdNeeded = FALSE;
BOOL hadSelected = FALSE;
if (!ip)
return;
ip->GetModContexts(mcList, nodes);
if (mcList.Count() != 1)
return;
ClearPatchDataFlag(mcList, EPD_BEENDONE);
theHold.Begin();
// RecordTopologyTags();
for (int i = 0; i < mcList.Count(); i++)
{
BOOL altered = FALSE;
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
if (patchData->GetFlag(EPD_BEENDONE))
continue;
// If the mesh isn't yet cache, this will cause it to get cached.
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(t, rpatch);
if ((!patch) ||(patch != pMesh))
continue;
// patchData->RecordTopologyTags(patch);
// If this is the first edit, then the delta arrays will be allocated
patchData->BeginEdit(t);
// If any bits are set in the selection set, let's DO IT!!
// if(patch->vertSel.NumberSet()) {
altered = holdNeeded = TRUE;
if (theHold.Holding())
theHold.Put(new PatchRestore(patchData, this, patch, rpatch));
// Call the vertex type change function
// ** Hulud bug hack for hooking my way \\\\\\\\\///////////
//patch->AddHook(vert1, seg);
// Config 0
switch (config)
{
case 0:
rpatch->AddHook (vert1, seg, *patch);
break;
case 1:
rpatch->AddHook (vert0, vert1, vert2, seg, *patch);
break;
default:
nlassert (0);
}
// ** //////////\\\\\\\\\\
// patch->UpdateHooks();
// InvalidateMesh();
patchData->UpdateChanges(patch, rpatch);
patchData->TempData(this)->Invalidate(PART_TOPO);
// }
patchData->SetFlag(EPD_BEENDONE, TRUE);
}
if (holdNeeded)
{
// ResolveTopoChanges();
theHold.Accept(GetString(IDS_TH_PATCHCHANGE));
}
else
{
ip->DisplayTempPrompt(GetString(IDS_TH_NOPATCHESSEL), PROMPT_TIME);
theHold.End();
}
nodes.DisposeTemporary();
ClearPatchDataFlag(mcList, EPD_BEENDONE);
NotifyDependents(FOREVER, PART_TOPO, REFMSG_CHANGE);
ip->RedrawViews(ip->GetTime(), REDRAW_NORMAL);
/* // If any bits are set in the selection set, let's DO IT!!
if (!ip)
return;
theHold.Begin();
POPatchGenRecord *rec = new POPatchGenRecord(this);
if (theHold.Holding())
theHold.Put(new PatchObjectRestore(this, rec));
// Call the patch type change function
patch.AddHook();
patch.InvalidateGeomCache();
InvalidateMesh();
theHold.Accept(GetResString(IDS_TH_PATCHCHANGE));
NotifyDependents(FOREVER, PART_TOPO, REFMSG_CHANGE);
ip->RedrawViews(ip->GetTime(), REDRAW_NORMAL);
*/
}