/*

* File: MinSegBus01Int.c

*

*

* --- THIS FILE GENERATED BY S-FUNCTION BUILDER: 3.0 ---

*

* This file is an S-function produced by the S-Function

* Builder which only recognizes certain fields. Changes made

* outside these fields will be lost the next time the block is

* used to load, edit, and resave this file. This file will be overwritten

* by the S-function Builder block. If you want to edit this file by hand,

* you must change it only in the area defined as:

*

* %%%-SFUNWIZ_defines_Changes_BEGIN

* #define NAME 'replacement text'

* %%% SFUNWIZ_defines_Changes_END

*

* DO NOT change NAME--Change the 'replacement text' only.

*

* For better compatibility with the Simulink Coder, the

* "wrapper" S-function technique is used. This is discussed

* in the Simulink Coder's Manual in the Chapter titled,

* "Wrapper S-functions".

*

* -------------------------------------------------------------------------

* | See matlabroot/simulink/src/sfuntmpl_doc.c for a more detailed template |

* -------------------------------------------------------------------------

* Created: Sat Jan 24 16:02:34 2015

*/

#define S_FUNCTION_LEVEL 2

#define S_FUNCTION_NAME MinSegBus01Int

/*<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<*/

/* %%%-SFUNWIZ_defines_Changes_BEGIN --- EDIT HERE TO _END */

#define NUM_INPUTS 1

/* Input Port 0 */

#define IN_PORT_0_NAME uint16_01

#define INPUT_0_WIDTH 1

#define INPUT_DIMS_0_COL 1

#define INPUT_0_DTYPE int16_T

#define INPUT_0_COMPLEX COMPLEX_NO

#define IN_0_FRAME_BASED FRAME_NO

#define IN_0_BUS_BASED 0

#define IN_0_BUS_NAME

#define IN_0_DIMS 1-D

#define INPUT_0_FEEDTHROUGH 1

#define IN_0_ISSIGNED 0

#define IN_0_WORDLENGTH 8

#define IN_0_FIXPOINTSCALING 1

#define IN_0_FRACTIONLENGTH 9

#define IN_0_BIAS 0

#define IN_0_SLOPE 0.125

#define NUM_OUTPUTS 0

#define NPARAMS 1

/* Parameter 1 */

#define PARAMETER_0_NAME Address

#define PARAMETER_0_DTYPE int8_T

#define PARAMETER_0_COMPLEX COMPLEX_NO

#define SAMPLE_TIME_0 0.03

#define NUM_DISC_STATES 1

#define DISC_STATES_IC [0]

#define NUM_CONT_STATES 0

#define CONT_STATES_IC [0]

#define SFUNWIZ_GENERATE_TLC 1

#define SOURCEFILES "__SFB__"

#define PANELINDEX 6

#define USE_SIMSTRUCT 0

#define SHOW_COMPILE_STEPS 0

#define CREATE_DEBUG_MEXFILE 0

#define SAVE_CODE_ONLY 0

#define SFUNWIZ_REVISION 3.0

/* %%%-SFUNWIZ_defines_Changes_END --- EDIT HERE TO _BEGIN */

/*<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<*/

#include "simstruc.h"

#define PARAM_DEF0(S) ssGetSFcnParam(S, 0)

#define IS_PARAM_INT8(pVal) (mxIsNumeric(pVal) && !mxIsLogical(pVal) &&\

!mxIsEmpty(pVal) && !mxIsSparse(pVal) && !mxIsComplex(pVal) && mxIsInt8(pVal))

extern void MinSegBus01Int_Outputs_wrapper(const int16_T *uint16_01,

const real_T *xD,

const int8_T *Address, const int_T p_width0);

extern void MinSegBus01Int_Update_wrapper(const int16_T *uint16_01,

real_T *xD,

const int8_T *Address, const int_T p_width0);

/*====================*

* S-function methods *

*====================*/

#define MDL_CHECK_PARAMETERS

#if defined(MDL_CHECK_PARAMETERS) && defined(MATLAB_MEX_FILE)

/* Function: mdlCheckParameters =============================================

* Abstract:

* Validate our parameters to verify they are okay.

*/

static void mdlCheckParameters(SimStruct *S)

{

int paramIndex = 0;

bool validParam = false;

/* All parameters must match the S-function Builder Dialog */

{

const mxArray *pVal0 = ssGetSFcnParam(S,0);

if (!IS_PARAM_INT8(pVal0)) {

validParam = true;

paramIndex = 0;

goto EXIT_POINT;

}

}

EXIT_POINT:

if (validParam) {

char parameterErrorMsg[1024];

sprintf(parameterErrorMsg, "The data type and or complexity of parameter %d does not match the "

"information specified in the S-function Builder dialog. "

"For non-double parameters you will need to cast them using int8, int16, "

"int32, uint8, uint16, uint32 or boolean.", paramIndex + 1);

ssSetErrorStatus(S,parameterErrorMsg);

}

return;

}

#endif /* MDL_CHECK_PARAMETERS */

/* Function: mdlInitializeSizes ===============================================

* Abstract:

* Setup sizes of the various vectors.

*/

static void mdlInitializeSizes(SimStruct *S)

{

DECL_AND_INIT_DIMSINFO(inputDimsInfo);

DECL_AND_INIT_DIMSINFO(outputDimsInfo);

ssSetNumSFcnParams(S, NPARAMS); /* Number of expected parameters */

#if defined(MATLAB_MEX_FILE)

if (ssGetNumSFcnParams(S) == ssGetSFcnParamsCount(S)) {

mdlCheckParameters(S);

if (ssGetErrorStatus(S) != NULL) {

return;

}

} else {

return; /* Parameter mismatch will be reported by Simulink */

}

#endif

ssSetNumContStates(S, NUM_CONT_STATES);

ssSetNumDiscStates(S, NUM_DISC_STATES);

if (!ssSetNumInputPorts(S, NUM_INPUTS)) return;

ssSetInputPortWidth(S, 0, INPUT_0_WIDTH);

ssSetInputPortDataType(S, 0, SS_INT16);

ssSetInputPortComplexSignal(S, 0, INPUT_0_COMPLEX);

ssSetInputPortDirectFeedThrough(S, 0, INPUT_0_FEEDTHROUGH);

ssSetInputPortRequiredContiguous(S, 0, 1); /*direct input signal access*/

if (!ssSetNumOutputPorts(S, NUM_OUTPUTS)) return;

ssSetNumSampleTimes(S, 1);

ssSetNumRWork(S, 0);

ssSetNumIWork(S, 0);

ssSetNumPWork(S, 0);

ssSetNumModes(S, 0);

ssSetNumNonsampledZCs(S, 0);

ssSetSimulinkVersionGeneratedIn(S, "8.3");

/* Take care when specifying exception free code - see sfuntmpl_doc.c */

ssSetOptions(S, (SS_OPTION_EXCEPTION_FREE_CODE |

SS_OPTION_USE_TLC_WITH_ACCELERATOR |

SS_OPTION_WORKS_WITH_CODE_REUSE));

}

# define MDL_SET_INPUT_PORT_FRAME_DATA

static void mdlSetInputPortFrameData(SimStruct *S,

int_T port,

Frame_T frameData)

{

ssSetInputPortFrameData(S, port, frameData);

}

/* Function: mdlInitializeSampleTimes =========================================

* Abstract:

* Specifiy the sample time.

*/

static void mdlInitializeSampleTimes(SimStruct *S)

{

ssSetSampleTime(S, 0, SAMPLE_TIME_0);

ssSetOffsetTime(S, 0, 0.0);

}

#define MDL_INITIALIZE_CONDITIONS

{

real_T *xD = ssGetRealDiscStates(S);

xD[0] = 0;

}

#define MDL_SET_INPUT_PORT_DATA_TYPE

static void mdlSetInputPortDataType(SimStruct *S, int port, DTypeId dType)

{

ssSetInputPortDataType( S, 0, dType);

}

#define MDL_SET_OUTPUT_PORT_DATA_TYPE

static void mdlSetOutputPortDataType(SimStruct *S, int port, DTypeId dType)

{

ssSetOutputPortDataType(S, 0, dType);

}

#define MDL_SET_DEFAULT_PORT_DATA_TYPES

static void mdlSetDefaultPortDataTypes(SimStruct *S)

{

ssSetInputPortDataType( S, 0, SS_DOUBLE);

ssSetOutputPortDataType(S, 0, SS_DOUBLE);

}

#define MDL_SET_WORK_WIDTHS

#if defined(MDL_SET_WORK_WIDTHS) && defined(MATLAB_MEX_FILE)

static void mdlSetWorkWidths(SimStruct *S)

{

const char_T *rtParamNames[] = {"P1"};

ssRegAllTunableParamsAsRunTimeParams(S, rtParamNames);

}

#endif

/* Function: mdlOutputs =======================================================

*

*/

static void mdlOutputs(SimStruct *S, int_T tid)

{

const int16_T *uint16_01 = (const int16_T*) ssGetInputPortSignal(S,0);

const real_T *xD = ssGetDiscStates(S);

const int_T p_width0 = mxGetNumberOfElements(PARAM_DEF0(S));

const int8_T *Address = (const int8_T *)mxGetData(PARAM_DEF0(S));

MinSegBus01Int_Outputs_wrapper(uint16_01, xD, Address, p_width0);

}

#define MDL_UPDATE /* Change to #undef to remove function */

/* Function: mdlUpdate ======================================================

* Abstract:

* This function is called once for every major integration time step.

* Discrete states are typically updated here, but this function is useful

* for performing any tasks that should only take place once per

* integration step.

*/

static void mdlUpdate(SimStruct *S, int_T tid)

{

real_T *xD = ssGetDiscStates(S);

const int16_T *uint16_01 = (const int16_T*) ssGetInputPortSignal(S,0);

const int_T p_width0 = mxGetNumberOfElements(PARAM_DEF0(S));

const int8_T *Address = (const int8_T *)mxGetData(PARAM_DEF0(S));

MinSegBus01Int_Update_wrapper(uint16_01, xD, Address, p_width0);

}

/* Function: mdlTerminate =====================================================

* Abstract:

* In this function, you should perform any actions that are necessary

* at the termination of a simulation. For example, if memory was

* allocated in mdlStart, this is the place to free it.

*/

static void mdlTerminate(SimStruct *S)

{

}

#ifdef MATLAB_MEX_FILE /* Is this file being compiled as a MEX-file? */

#include "simulink.c" /* MEX-file interface mechanism */

#else

#include "cg_sfun.h" /* Code generation registration function */

#endif