/*
* create the WMI request to connect to a socket
*/
AJ_Status AJ_WSL_NET_socket_connect(AJ_WSL_SOCKNUM sock, uint32_t addr, uint16_t port, uint16_t family)
{
AJ_Status status;
AJ_BufList* connectV4;
wsl_work_item* item = NULL;
connectV4 = AJ_BufListCreate();
WSL_MarshalPacket(connectV4, WSL_SOCKET, WSL_SOCK_CONNECT, 0x0, AJ_WSL_SOCKET_CONTEXT[sock].targetHandle, port, family, &addr, 0x8);
WMI_MarshalHeader(connectV4, 1, 1);
AJ_WSL_WMI_PadPayload(connectV4);
//AJ_BufListPrintDumpContinuous(connectV4);
AJ_WSL_WMI_QueueWorkItem(sock, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_CONNECT), AJ_WSL_HTC_DATA_ENDPOINT1, connectV4);
do {
status = AJ_WSL_WMI_WaitForWorkItem(sock, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_CONNECT), &item);
if (item) {
if (item->itemType == AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_CONNECT)) {
AJ_InfoPrintf(("AJ_WSL_NET_socket_connect(): WORK ITEM RECEIVED\n"));
AJ_WSL_WMI_FreeWorkItem(item);
break;
} else {
AJ_WarnPrintf(("AJ_WSL_NET_socket_connect(): BAD WORK ITEM RECEIVED\n"));
}
AJ_WSL_WMI_FreeWorkItem(item);
}
} while (1);
return status;
}
/*
* create the WMI request to open a socket on the target device
*/
int8_t AJ_WSL_NET_socket_open(uint16_t domain, uint16_t type, uint16_t protocol)
{
AJ_Status status;
uint8_t handle = AJ_WSL_SOCKET_MAX;
AJ_BufList* open;
open = AJ_BufListCreate();
WSL_MarshalPacket(open, WSL_SOCKET, WSL_SOCK_OPEN, 0x0c, domain, type, protocol);
WMI_MarshalHeader(open, 1, 1);
AJ_WSL_WMI_PadPayload(open);
//AJ_BufListPrintDumpContinuous(open);
AJ_WSL_WMI_QueueWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_OPEN), AJ_WSL_HTC_DATA_ENDPOINT1, open);
// wait until the command completes
{
wsl_work_item* item = NULL;
status = AJ_WSL_WMI_WaitForWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_OPEN), &item);
if (status != AJ_OK) {
AJ_WSL_WMI_FreeWorkItem(item);
return -1;
}
if (item) {
if (item->itemType == AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_OPEN)) {
AJ_InfoPrintf(("AJ_WSL_NET_socket_open(): WORK ITEM RECEIVED\n"));
uint16_t WMIEvent;
uint32_t reserved;
uint32_t _command;
uint32_t _handle;
uint32_t _error;
uint32_t _mode;
WMI_Unmarshal(item->node->buffer, "quuuuu", &WMIEvent, &reserved, &_command, &_handle, &_error, &_mode);
AJ_InfoPrintf((" Socket Open: handle %08lx error %08lx\n", _handle, _error));
handle = AJ_WSL_FindOpenSocketContext();
if (handle != AJ_WSL_SOCKET_MAX) {
AJ_WSL_SOCKET_CONTEXT[handle].targetHandle = _handle;
AJ_WSL_SOCKET_CONTEXT[handle].valid = TRUE;
AJ_WSL_SOCKET_CONTEXT[handle].domain = domain;
AJ_WSL_SOCKET_CONTEXT[handle].type = type;
AJ_WSL_SOCKET_CONTEXT[handle].protocol = protocol;
}
} else {
AJ_WarnPrintf(("AJ_WSL_NET_socket_open(): BAD WORK ITEM RECEIVED\n"));
}
}
AJ_WSL_WMI_FreeWorkItem(item);
}
AJ_Sleep(100);
return handle;
}
AJ_Status AJ_WSL_NET_set_sock_options(uint32_t socket, uint32_t level, uint32_t optname, uint32_t optlen, uint8_t* optval)
{
AJ_Status status;
AJ_InfoPrintf(("AJ_WSL_NET_set_sock_options()\n"));
wsl_work_item* item;
AJ_BufList* opts;
AJ_BufNode* trailer;
uint32_t total_length;
opts = AJ_BufListCreate();
total_length = AJ_SOCK_OPTS_OFFSET + optlen;
WSL_MarshalPacket(opts, WSL_SOCKET, WSL_SOCK_SETSOCKOPT, total_length, AJ_WSL_SOCKET_CONTEXT[socket].targetHandle, level, optname, optlen);
if (optname == WSL_JOIN_GROUP) {
trailer = AJ_BufListCreateNode((optlen / 2) + 2);
memcpy(opts->tail->buffer + opts->tail->length - 17, optval, (optlen / 2) + 1);
memcpy(trailer->buffer, optval + 17, 15);
} else {
trailer = AJ_BufListCreateNode(optlen + 3);
memset(trailer->buffer, 0, optlen + 3);
}
AJ_BufListPushTail(opts, trailer);
WMI_MarshalHeader(opts, 1, 1);
//AJ_BufListPrintDumpContinuous(opts);
AJ_WSL_WMI_QueueWorkItem(socket, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_SETSOCKOPT), AJ_WSL_HTC_DATA_ENDPOINT1, opts);
// wait until the command completes
status = AJ_WSL_WMI_WaitForWorkItem(socket, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_SETSOCKOPT), &item);
AJ_WSL_WMI_FreeWorkItem(item);
return status;
}
/*
* create the WMI request to close a socket on the target device
*/
AJ_Status AJ_WSL_NET_socket_close(AJ_WSL_SOCKNUM sock)
{
AJ_Status status;
AJ_BufList* close;
if (AJ_WSL_SOCKET_CONTEXT[sock].valid == TRUE) {
close = AJ_BufListCreate();
WSL_MarshalPacket(close, WSL_SOCKET, WSL_SOCK_CLOSE, 0x0, AJ_WSL_SOCKET_CONTEXT[sock].targetHandle);
WMI_MarshalHeader(close, 1, 1);
AJ_WSL_WMI_PadPayload(close);
//AJ_BufListPrintDumpContinuous(close);
AJ_WSL_WMI_QueueWorkItem(sock, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_CLOSE), AJ_WSL_HTC_DATA_ENDPOINT1, close);
// wait until the command completes
do {
wsl_work_item* item = NULL;
status = AJ_WSL_WMI_WaitForWorkItem(sock, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_CLOSE), &item);
if (item) {
if (item->itemType == AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_CLOSE)) {
AJ_InfoPrintf(("AJ_WSL_NET_socket_close(): WORK ITEM RECEIVED\n"));
uint16_t WMIEvent;
uint32_t reserved;
uint32_t _command;
uint32_t _handle;
uint32_t _error;
uint32_t _mode;
WMI_Unmarshal(item->node->buffer, "quuuuu", &WMIEvent, &reserved, &_command, &_handle, &_error, &_mode);
AJ_InfoPrintf((" Socket close: handle %08lx error %08lx\n", _handle, _error));
if (_handle == AJ_WSL_SOCKET_CONTEXT[sock].targetHandle) {
AJ_WSL_SOCKET_CONTEXT[sock].targetHandle = UINT32_MAX;
AJ_WSL_SOCKET_CONTEXT[sock].valid = FALSE;
}
AJ_WSL_WMI_FreeWorkItem(item);
break; // waited until close command completed
} else {
AJ_InfoPrintf(("AJ_WSL_NET_socket_close(): BAD WORK ITEM RECEIVED\n"));
}
}
AJ_WSL_WMI_FreeWorkItem(item);
} while (1);
}
return status;
}
int16_t AJ_WSL_NET_socket_sendto6(uint32_t socket, uint8_t* data, uint16_t size, uint8_t* addr, uint16_t port, uint32_t timeout)
{
AJ_Status status;
AJ_InfoPrintf(("AJ_WSL_NET_socket_sendto()\n"));
AJ_BufList* send;
AJ_BufNode* tx_data_node;
if (AJ_WSL_SOCKET_CONTEXT[socket].valid == FALSE) {
AJ_InfoPrintf(("sendto on invalid socket %ld\n", socket));
return -1;
}
send = AJ_BufListCreate();
tx_data_node = AJ_BufListCreateNodeExternalZero(data, size, FALSE);
WMI_MarshalSendTo6(send, AJ_WSL_SOCKET_CONTEXT[socket].targetHandle, tx_data_node, size, addr, port);
//send now contains the header info for the two part packet your sending
//now write send to the MBOX then the data your sending
AJ_WSL_WMI_PadPayload(send);
//AJ_BufListPrintDumpContinuous(send);
AJ_WSL_WMI_QueueWorkItem(socket, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_NET_DATA_TX), AJ_WSL_HTC_DATA_ENDPOINT2, send);
wsl_work_item* item = NULL;
/*
* Because these are blocking sends, we need to wait until the data has been passed to the target.
*/
do {
status = AJ_WSL_WMI_WaitForWorkItem(socket, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_NET_DATA_TX), &item);
if (item) {
if (item->itemType == AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_NET_DATA_TX)) {
AJ_InfoPrintf(("AJ_WSL_NET_socket_send(): WORK ITEM RECEIVED\n"));
AJ_WSL_WMI_FreeWorkItem(item);
break;
} else {
AJ_InfoPrintf(("AJ_WSL_NET_socket_sendto(): BAD WORK ITEM RECEIVED\n"));
}
AJ_WSL_WMI_FreeWorkItem(item);
}
} while (1);
return size;
}
/*
* This function just returns the work item. If there is data inside that you want
* you have to unmarshal it after you receive the work item.
*/
AJ_Status AJ_WSL_WMI_WaitForWorkItem(uint32_t socket, uint8_t command, wsl_work_item** item, uint32_t timeout)
{
AJ_Status status;
AJ_Time timer;
AJ_InitTimer(&timer);
// AJ_AlwaysPrintf(("WaitForWorkItem: %x\n", command));
//wsl_work_item* item;
status = AJ_QueuePull(AJ_WSL_SOCKET_CONTEXT[socket].workRxQueue, item, timeout);
timeout -= AJ_GetElapsedTime(&timer, TRUE);
if ((status == AJ_OK) && item && *item) {
if ((status == AJ_OK) && ((*item)->itemType == WSL_NET_INTERUPT)) {
// We don't care about the interrupted signal for any calls using this function
AJ_WSL_WMI_FreeWorkItem((*item));
status = AJ_QueuePull(AJ_WSL_SOCKET_CONTEXT[socket].workRxQueue, item, timeout);
}
if ((status == AJ_OK) && ((*item)->itemType == command)) {
AJ_InfoPrintf(("AJ_WSL_WMI_WaitForWorkItem(): Received work item %s\n", WSL_WorkItemText(command)));
return AJ_OK;
} else if ((status == AJ_OK) && ((*item)->itemType == WSL_NET_DISCONNECT)) {
AJ_InfoPrintf(("Got disconnect while waiting for %s\n", WSL_WorkItemText(command)));
// Clean up the network queues
int i;
for (i = 0; i < AJ_WSL_SOCKET_MAX; i++) {
wsl_work_item* clear;
AJ_WSL_SOCKET_CONTEXT[i].valid = FALSE;
// Removed any stashed data
AJ_BufListFree(AJ_WSL_SOCKET_CONTEXT[i].stashedRxList, 1);
// Reallocate a new stash
AJ_WSL_SOCKET_CONTEXT[i].stashedRxList = AJ_BufListCreate();
// Reset the queue, any work items are now invalid since the socket was closed
while (AJ_QueuePull(AJ_WSL_SOCKET_CONTEXT[i].workRxQueue, &clear, 0) == AJ_OK) {
AJ_WSL_WMI_FreeWorkItem(clear);
}
while (AJ_QueuePull(AJ_WSL_SOCKET_CONTEXT[i].workTxQueue, &clear, 0) == AJ_OK) {
AJ_WSL_WMI_FreeWorkItem(clear);
}
AJ_QueueReset(AJ_WSL_SOCKET_CONTEXT[i].workRxQueue);
AJ_QueueReset(AJ_WSL_SOCKET_CONTEXT[i].workTxQueue);
}
AJ_WSL_WMI_FreeWorkItem((*item));
return AJ_ERR_LINK_DEAD;
} else if ((status == AJ_OK) && ((*item)->itemType == WSL_NET_DATA_RX)) {
// If we got data we want to save it and not throw it away, its still not what we
// wanted so we can free the work item as it wont be needed at a higher level
AJ_InfoPrintf(("Got data while waiting for %s\n", WSL_WorkItemText(command)));
if ((*item)->node->length) {
AJ_BufNode* new_node = AJ_BufNodeCreateAndTakeOwnership((*item)->node);
AJ_BufListPushTail(AJ_WSL_SOCKET_CONTEXT[socket].stashedRxList, new_node);
AJ_WSL_WMI_FreeWorkItem((*item));
return AJ_ERR_NULL;
}
} else {
AJ_WarnPrintf(("AJ_WSL_WMI_WaitForWorkItem(): Received incorrect work item %s, wanted %s\n", WSL_WorkItemText((*item)->itemType), WSL_WorkItemText(command)));
// Wrong work item, but return NULL because we can free the item internally
AJ_WSL_WMI_FreeWorkItem((*item));
return AJ_ERR_NULL;
}
}
return AJ_ERR_NULL;
}
AJ_Status AJ_WSL_NET_socket_bind6(AJ_WSL_SOCKNUM sock, uint8_t* addr, uint16_t port)
{
AJ_Status status;
AJ_BufList* bind;
wsl_work_item* item;
bind = AJ_BufListCreate();
WSL_MarshalPacket(bind, WSL_BIND6, 0x0, 0x03, 0x24, AJ_WSL_SOCKET_CONTEXT[sock].targetHandle, 0x00, port, addr, 0x00, 0x00020383, 0x0002001c);
WMI_MarshalHeader(bind, 1, 1);
AJ_WSL_WMI_PadPayload(bind);
//AJ_BufListPrintDumpContinuous(bind);
AJ_WSL_WMI_QueueWorkItem(sock, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_BIND), AJ_WSL_HTC_DATA_ENDPOINT1, bind);
status = AJ_WSL_WMI_WaitForWorkItem(sock, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_NET_BIND), &item);
AJ_WSL_WMI_FreeWorkItem(item);
return status;
}
AJ_Status AJ_WSL_NET_set_hostname(const char* hostname)
{
AJ_Status status;
AJ_InfoPrintf(("===== SET HOSTNAME ====\n"));
wsl_work_item* item;
AJ_BufList* host;
host = AJ_BufListCreate();
WSL_MarshalPacket(host, WSL_SOCKET, WSL_SOCK_IP_HOST_NAME, 0x21, hostname);
WMI_MarshalHeader(host, 1, 1);
AJ_WSL_WMI_PadPayload(host);
//AJ_BufListPrintDumpContinuous(host);
AJ_WSL_WMI_QueueWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_IP_HOST_NAME), AJ_WSL_HTC_DATA_ENDPOINT1, host);
status = AJ_WSL_WMI_WaitForWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_IP_HOST_NAME), &item);
AJ_WSL_WMI_FreeWorkItem(item);
return status;
}
AJ_Status AJ_WSL_NET_disconnect(void)
{
AJ_Status status;
AJ_BufList* disconnect;
wsl_work_item* item;
AJ_AlwaysPrintf((("AJ_WSL_NET_disconnect(): DISCONNECT\n")));
disconnect = AJ_BufListCreate();
WSL_MarshalPacket(disconnect, WSL_DISCONNECT, 0, 0, 0, 0, 0, 0, 0, 0);
WMI_MarshalHeader(disconnect, 1, 1);
AJ_WSL_WMI_PadPayload(disconnect);
//AJ_BufListPrintDumpContinuous(disconnect);
AJ_WSL_WMI_QueueWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_NETWORK, WSL_NET_DISCONNECT), AJ_WSL_HTC_DATA_ENDPOINT1, disconnect);
status = AJ_WSL_WMI_WaitForWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_NETWORK, WSL_NET_DISCONNECT), &item);
AJ_WSL_WMI_FreeWorkItem(item);
return status;
}
/*
* create the WMI request to bind a socket on the target device to an address and port
*/
AJ_Status AJ_WSL_NET_socket_bind(AJ_WSL_SOCKNUM sock, uint32_t addr, uint16_t port)
{
AJ_Status status;
AJ_BufList* bind;
wsl_work_item* item;
bind = AJ_BufListCreate();
WSL_MarshalPacket(bind, WSL_SOCKET, WSL_SOCK_BIND, 0x0, AJ_WSL_SOCKET_CONTEXT[sock].targetHandle, port, AJ_WSL_UDP, &addr, 0x8);
WMI_MarshalHeader(bind, 1, 1);
AJ_WSL_WMI_PadPayload(bind);
//AJ_BufListPrintDumpContinuous(bind);
AJ_WSL_WMI_QueueWorkItem(sock, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_BIND), AJ_WSL_HTC_DATA_ENDPOINT1, bind);
status = AJ_WSL_WMI_WaitForWorkItem(sock, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_BIND), &item, AJ_NET_TIMEOUT);
if (item && (status == AJ_OK)) {
AJ_WSL_WMI_FreeWorkItem(item);
}
return status;
}
AJ_Status AJ_WSL_ip6config(uint32_t mode, uint8_t* globalAddr, uint8_t* localAddr, uint8_t* gateway, uint8_t* exAddr, uint32_t linkPrefix, uint32_t globalPrefix, uint32_t gwPrefix, uint32_t glbPrefixExt)
{
AJ_Status status;
if (mode != IPCONFIG_QUERY) {
AJ_ErrPrintf(("AJ_WSL_ip6config(): Can only query IPV6, cannot use mode %lu\n", mode));
return AJ_ERR_UNEXPECTED;
}
AJ_BufList* ip6config;
ip6config = AJ_BufListCreate(); //First zeros are for v4
WSL_MarshalPacket(ip6config, WSL_SOCKET, WSL_SOCK_IP6CONFIG, 0x60, 0, 0, 0, 0, globalAddr, localAddr, gateway, exAddr, linkPrefix, globalPrefix, gwPrefix, glbPrefixExt);
WMI_MarshalHeader(ip6config, 1, 1);
AJ_WSL_WMI_PadPayload(ip6config);
//AJ_BufListPrintDumpContinuous(ip6config);
AJ_WSL_WMI_QueueWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_IP6CONFIG), AJ_WSL_HTC_DATA_ENDPOINT1, ip6config);
{
wsl_work_item* item = NULL;
status = AJ_WSL_WMI_WaitForWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_IP6CONFIG), &item);
if (item) {
if (item->itemType == AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_IP6CONFIG)) {
AJ_InfoPrintf(("AJ_WSL_ip6config(): WORK ITEM RECEIVED\n"));
uint16_t WMIEvent;
uint32_t reserved;
uint32_t _command;
uint32_t _handle;
uint32_t _error;
uint32_t _mode;
uint32_t _ipv4 = 0;
uint32_t _ipv4mask = 0;
uint32_t _ipv4gateway = 0;
WMI_Unmarshal(item->node->buffer, "quuuuuuuu6666uuuu", &WMIEvent, &reserved, &_command, &_handle, &_error, &_mode, _ipv4, _ipv4mask, _ipv4gateway, localAddr, globalAddr, gateway, exAddr, &linkPrefix, &globalPrefix, &gwPrefix, &glbPrefixExt);
//AJ_DumpBytes("IPV6", item->node->buffer, 0x60);
} else {
AJ_WarnPrintf(("AJ_WSL_ip6config(): BAD WORK ITEM RECEIVED\n"));
}
}
AJ_WSL_WMI_FreeWorkItem(item);
}
return status;
}
AJ_Status AJ_WSL_NET_scan(void)
{
AJ_Status status;
AJ_BufList* start_scan;
wsl_work_item* item;
AJ_WSL_InitScanList();
AJ_WSL_NET_BSS_FILTER(1);
AJ_WSL_NET_set_scan_params();
AJ_AlwaysPrintf((("AJ_WSL_NET_scan(): START_SCAN\n")));
start_scan = AJ_BufListCreate();
WSL_MarshalPacket(start_scan, WSL_START_SCAN, 0, 0, 0, 0, 0, 0, 0, 0);
WMI_MarshalHeader(start_scan, 1, 1);
AJ_WSL_WMI_PadPayload(start_scan);
AJ_WSL_WMI_QueueWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_NETWORK, WSL_NET_SCAN), AJ_WSL_HTC_DATA_ENDPOINT1, start_scan);
status = AJ_WSL_WMI_WaitForWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_NETWORK, WSL_NET_SCAN), &item);
AJ_WSL_WMI_FreeWorkItem(item);
return status;
}
AJ_Status AJ_WSL_NET_scan(void)
{
AJ_Status status;
AJ_BufList* start_scan;
wsl_work_item* item;
AJ_WSL_NET_BSS_FILTER(1);
AJ_WSL_NET_set_scan_params();
AJ_InfoPrintf((("AJ_WSL_NET_scan(): START_SCAN\n")));
start_scan = AJ_BufListCreate();
WSL_MarshalPacket(start_scan, WSL_START_SCAN, 0, 0, 0, 0, 0, 0, 0, 0);
WMI_MarshalHeader(start_scan, 1, 1);
AJ_WSL_WMI_PadPayload(start_scan);
AJ_WSL_WMI_QueueWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_NETWORK, WSL_NET_SCAN), AJ_WSL_HTC_DATA_ENDPOINT1, start_scan);
status = AJ_WSL_WMI_WaitForWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_NETWORK, WSL_NET_SCAN), &item, AJ_NET_TIMEOUT);
if (item && (status == AJ_OK)) {
if (item->itemType == WSL_NET_SCAN) {
AJ_InfoPrintf(("AJ_WSL_NET_scan(): WORK ITEM RECEIVED\n"));
uint16_t WMIEvent;
uint32_t toss;
uint32_t error;
WMI_Unmarshal(item->node->buffer, "quu", &WMIEvent, &toss, &error);
if (error != 0) {
AJ_ErrPrintf(("AJ_WSL_NET_scan(): Scan error, scan returned: %u", error));
status = AJ_ERR_INVALID;
}
} else {
AJ_WarnPrintf(("AJ_WSL_NET_scan(): BAD WORK ITEM RECEIVED\n"));
}
AJ_WSL_WMI_FreeWorkItem(item);
}
return status;
}
void AJ_WSL_MBoxListenAndProcessTask(void* parameters)
{
g_b_spi_interrupt_data_ready = FALSE;
AJ_WSL_SPI_InitializeSPIController();
set_SPI_registers();
write_BOOT_PARAM();
g_b_spi_interrupt_data_ready = FALSE;
// loop and process all of the responses
while (1) {
AJ_Status status;
AJ_WSL_HTC_ProcessInterruptCause();
uint8_t i;
for (i = 0; i < AJ_WSL_SOCKET_MAX; i++) {
do {
wsl_work_item* item = NULL;
// peek at the queue, then make sure we have enough credits
// if we have enough, pull and send the workitem to the MBOX
// otherwise, move to the next socket and then eventually out of this loop.
// Credits would be available again once AJ_WSL_HTC_ProcessInterruptCause has
// read any credit-adjustment trailers
status = AJ_QueuePeek(AJ_WSL_SOCKET_CONTEXT[i].workTxQueue, &item);
if ((status != AJ_OK) || (AJ_WSL_HTC_Global.endpoints[item->endpoint].txCredits < 1)) {
break;
}
// pull a work item off of a socket queue and send it
AJ_QueuePull(AJ_WSL_SOCKET_CONTEXT[i].workTxQueue, &item, 0);
if (!item) {
break;
} else {
//AJ_AlwaysPrintf(("AJ_WSL_MBoxListenAndProcessTask: %x\n", item->itemType));
AJ_WSL_WriteBufListToMBox(0, item->endpoint, AJ_BufListLengthOnWire(item->list), item->list);
/*
* if this item is sending data, create a workitem indicating completion
* this special check is needed because there is no socket send command in WMI,
* otherwise we could handle it in AJ_WSL_WMI_ProcessWMIEvent
*/
if (item->itemType == AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_NET_DATA_TX)) {
wsl_work_item** ppWork;
wsl_work_item* sockWork;
sockWork = (wsl_work_item*)AJ_WSL_Malloc(sizeof(wsl_work_item));
memset(sockWork, 0, sizeof(wsl_work_item));
sockWork->itemType = item->itemType;
sockWork->endpoint = item->endpoint;
ppWork = &sockWork;
AJ_QueuePush(AJ_WSL_SOCKET_CONTEXT[i].workRxQueue, ppWork, AJ_TIMER_FOREVER);
}
AJ_WSL_WMI_FreeWorkItem(item);
}
} while (1);
}
if (!g_b_spi_interrupt_data_ready) {
AJ_YieldCurrentTask();
}
g_b_spi_interrupt_data_ready = FALSE; // reset the state of the interrupt signal
}
}
/*
* create the WMI request to bind a socket on the target device to an address and port
*/
int16_t AJ_WSL_NET_socket_recv(AJ_WSL_SOCKNUM sock, uint8_t* buffer, uint32_t sizeBuffer, uint32_t timeout)
{
// AJ_InfoPrintf(("AJ_WSL_NET_socket_recv()\n"));
int16_t ret = -1;
uint32_t rx = sizeBuffer;
uint32_t stash = 0;
// read from stash first.
uint16_t stashLength;
if (sock >= AJ_WSL_SOCKET_MAX) {
// tried to get data from an invalid socket, return an error
return ret;
}
if (AJ_WSL_SOCKET_CONTEXT[sock].valid == FALSE) {
// tried to get data from an invalid socket, return the data read from the stash
AJ_BufListFree(AJ_WSL_SOCKET_CONTEXT[sock].stashedRxList, 1);
AJ_WSL_SOCKET_CONTEXT[sock].stashedRxList = AJ_BufListCreate();
//flush the queue
AJ_QueueReset(AJ_WSL_SOCKET_CONTEXT[sock].workRxQueue);
return ret;
}
if (AJ_WSL_SOCKET_CONTEXT[sock].stashedRxList) {
stashLength = AJ_BufListLengthOnWire(AJ_WSL_SOCKET_CONTEXT[sock].stashedRxList);
if (stashLength != 0) {
stash = min(rx, stashLength);
AJ_BufListCopyBytes(AJ_WSL_SOCKET_CONTEXT[sock].stashedRxList, stash, buffer);
AJ_BufListPullBytes(AJ_WSL_SOCKET_CONTEXT[sock].stashedRxList, stash); // shift left-overs toward the start.
ret = stash;
sizeBuffer -= stash;
}
}
// wait until there is data
if (sizeBuffer) {
wsl_work_item* item = NULL;
AJ_Status status;
// the stash was depleted and you want more data
if (AJ_WSL_SOCKET_CONTEXT[sock].valid == FALSE) {
// tried to get data from an invalid socket, return the data read from the stash
return ret;
}
status = AJ_QueuePull(AJ_WSL_SOCKET_CONTEXT[sock].workRxQueue, &item, timeout);
if (item) {
if (item->itemType == WSL_NET_INTERUPT) {
// At this point we dont care about the interrupted signal but we are expecting a RX packet
// so we need to pull the next item off the queue
AJ_WSL_WMI_FreeWorkItem(item);
status = AJ_QueuePull(AJ_WSL_SOCKET_CONTEXT[sock].workRxQueue, &item, timeout);
}
if ((status == AJ_OK) && (item->itemType == WSL_NET_DISCONNECT)) {
AJ_InfoPrintf(("Disconnect received\n"));
// Clean up the network queues
int i;
for (i = 0; i < AJ_WSL_SOCKET_MAX; i++) {
AJ_WSL_SOCKET_CONTEXT[i].valid = FALSE;
// Removed any stashed data
AJ_BufListFree(AJ_WSL_SOCKET_CONTEXT[i].stashedRxList, 1);
// Reallocate a new stash
AJ_WSL_SOCKET_CONTEXT[i].stashedRxList = AJ_BufListCreate();
// Reset the queue, any work items are now invalid since the socket was closed
AJ_QueueReset(AJ_WSL_SOCKET_CONTEXT[i].workRxQueue);
AJ_QueueReset(AJ_WSL_SOCKET_CONTEXT[i].workTxQueue);
}
ret = -1;
} else if ((status == AJ_OK) && (item->itemType == WSL_NET_CLOSE || item->itemType == AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_CLOSE))) {
// Pull the close work item off the queue
AJ_QueuePull(AJ_WSL_SOCKET_CONTEXT[sock].workRxQueue, &item, 0);
// Socket was closed so tear down the connections
AJ_WSL_SOCKET_CONTEXT[sock].valid = FALSE;
// Removed any stashed data
AJ_BufListFree(AJ_WSL_SOCKET_CONTEXT[sock].stashedRxList, 1);
// Reallocate a new stash
AJ_WSL_SOCKET_CONTEXT[sock].stashedRxList = AJ_BufListCreate();
// Reset the queue, any work items are now invalid since the socket was closed
AJ_QueueReset(AJ_WSL_SOCKET_CONTEXT[sock].workRxQueue);
AJ_QueueReset(AJ_WSL_SOCKET_CONTEXT[sock].workTxQueue);
ret = -1;
} else if ((status == AJ_OK) && (item->itemType == WSL_NET_DATA_RX)) {
//AJ_InfoPrintf(("=====DATA RX ITEM RECEIVED=====\n"));
//AJ_DumpBytes("DATA RX ITEM", item->node->buffer, item->size);
rx = min(sizeBuffer, item->size);
memcpy(buffer + stash, item->node->buffer, rx);
AJ_BufNodePullBytes(item->node, rx);
// check node: if not empty assign to stash.
if (item->node->length) {
AJ_BufListPushTail(AJ_WSL_SOCKET_CONTEXT[sock].stashedRxList, item->node);
item->node = NULL;
}
ret = rx + stash;
} else {
AJ_InfoPrintf(("AJ_WSL_NET_socket_recv(): BAD WORK ITEM RECEIVED\n"));
}
AJ_WSL_WMI_FreeWorkItem(item);
} else {
ret = 0;
AJ_InfoPrintf(("socket_recv timed out\n"));
}
}
return ret;
}
/*
* Poll over a socket until there is data ready or till a timeout
*
* Returns -2 on timeout
* -1 on interrupted
* 1 on success
* 0 on close
*
*/
int16_t AJ_WSL_NET_socket_select(AJ_WSL_SOCKNUM sock, uint32_t timeout)
{
AJ_Time timer;
wsl_work_item* peek;
AJ_Status status;
int16_t ret = 0;
// Check if the socket is valid
if (sock >= AJ_WSL_SOCKET_MAX) {
// tried to get data from an invalid socket, return an error
return ret;
}
if (AJ_WSL_SOCKET_CONTEXT[sock].valid == FALSE) {
// tried to get data from an invalid socket, return the data read from the stash
AJ_BufListFree(AJ_WSL_SOCKET_CONTEXT[sock].stashedRxList, 1);
AJ_WSL_SOCKET_CONTEXT[sock].stashedRxList = AJ_BufListCreate();
//flush the queue
return ret;
}
AJ_InitTimer(&timer);
// There are 5 conditions that we need to check for
// 1. If we got an interrupted work item
// 2. If there is data in the RX stash
// 3. If there is a RX work item in the queue
// 4. If there is a socket close work item in the queue
// 5. If the timeout has expired
while (1) {
status = AJ_QueuePeek(AJ_WSL_SOCKET_CONTEXT[sock].workRxQueue, &peek);
//AJ_AlwaysPrintf(("Item type = %u\n", peek->itemType));
if ((status == AJ_OK) && (peek->itemType == WSL_NET_INTERUPT)) {
// Pull the interrupted item off because we dont need it anymore
AJ_QueuePull(AJ_WSL_SOCKET_CONTEXT[sock].workRxQueue, &peek, 0);
AJ_WSL_WMI_FreeWorkItem(peek);
ret = -1;
break;
} else if (AJ_BufListLengthOnWire(AJ_WSL_SOCKET_CONTEXT[sock].stashedRxList) > 0) {
ret = 1;
break;
} else if ((status == AJ_OK) && (peek->itemType == WSL_NET_DATA_RX)) {
ret = 1;
break;
} else if ((status == AJ_OK) && (peek->itemType == WSL_NET_CLOSE ||
peek->itemType == WSL_NET_DISCONNECT ||
peek->itemType == AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_CLOSE))) {
// Pull the close work item off the queue
AJ_QueuePull(AJ_WSL_SOCKET_CONTEXT[sock].workRxQueue, &peek, 0);
// Socket was closed so tear down the connections
AJ_WSL_SOCKET_CONTEXT[sock].valid = FALSE;
// Removed any stashed data
AJ_BufListFree(AJ_WSL_SOCKET_CONTEXT[sock].stashedRxList, 1);
// Reallocate a new stash
AJ_WSL_SOCKET_CONTEXT[sock].stashedRxList = AJ_BufListCreate();
// Reset the queue, any work items are now invalid since the socket was closed
AJ_QueueReset(AJ_WSL_SOCKET_CONTEXT[sock].workRxQueue);
AJ_QueueReset(AJ_WSL_SOCKET_CONTEXT[sock].workTxQueue);
AJ_WSL_WMI_FreeWorkItem(peek);
ret = 0;
break;
} else if (AJ_GetElapsedTime(&timer, TRUE) >= timeout) {
ret = -2;
break;
}
}
return ret;
}
AJ_EXPORT AJ_Status AJ_WSL_NET_connect(const char* SSID, const char* passphrase, WSL_NET_AUTH_MODE auth, WSL_NET_CRYPTO_TYPE crypto, uint8_t softAP)
{
AJ_Status status;
wsl_scan_list* list;
list = (wsl_scan_list*)AJ_WSL_GetScanList();
WSL_ClearScanList(list);
AJ_WSL_NET_SetPowerMode(2);
uint8_t bss_mac[6];
// Open auth does not require you to explicitly set the BSSID so this secondary scan is not needed
if (!softAP) {
if (auth != WSL_NET_AUTH_NONE) {
// Do a scan of just the SSID you want
AJ_WSL_SetProbedSSID(SSID, 1);
{
AJ_BufList* start_scan;
uint8_t found = 0;
int i;
AJ_WSL_NET_set_scan_params();
while (!found) {
wsl_work_item* item;
AJ_InfoPrintf(("AJ_WSL_NET_scan(): START_SCAN\n"));
start_scan = AJ_BufListCreate();
AJ_WSL_SetProbedSSID(SSID, 1);
AJ_WSL_NET_set_scan_params();
AJ_WSL_NET_BSS_FILTER(6);
WSL_MarshalPacket(start_scan, WSL_START_SCAN, 0, 0, 0, 0, 0, 0, 0, 0);
WMI_MarshalHeader(start_scan, 1, 1);
AJ_WSL_WMI_PadPayload(start_scan);
//AJ_BufListPrintDumpContinuous(start_scan);
AJ_WSL_WMI_QueueWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_NETWORK, WSL_NET_SCAN), AJ_WSL_HTC_DATA_ENDPOINT1, start_scan);
status = AJ_WSL_WMI_WaitForWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_NETWORK, WSL_NET_SCAN), &item);
AJ_WSL_WMI_FreeWorkItem(item);
// Get the new list (just of the SSID provided in the connect command)
AJ_WSL_NET_scan_stop();
list = (wsl_scan_list*)AJ_WSL_GetScanList();
if (list->size == 0) {
AJ_AlwaysPrintf(("Could not find access point %s\n", SSID));
WSL_ClearScanList(list);
AJ_Sleep(AJ_WSL_CONNECT_WAIT);
continue;
}
WSL_PrintScanSorted();
// Find the SSID you want to connect to in the second scan list
for (i = 0; i < list->size; i++) {
if (0 == strcmp(list->list[i].ssid, SSID)) {
memcpy(&bss_mac, list->list[i].bssid, 6);
found = 1;
break;
}
}
WSL_ClearScanList(list);
}
}
}
}
{
AJ_BufList* connect;
AJ_BufList* connectOut;
static const uint8_t zero_mac[6] = { 0, 0, 0, 0, 0, 0 };
uint8_t connect_mac[6];
wsl_work_item* item = NULL;
uint8_t found = 0;
connect = AJ_BufListCreate();
/* Three different ways connect can be called.
* 1. SoftAP: The devices mac is fetched and used
* 2. Using Auth: The SSID's mac is found and used
* 3. Open auth: A zero'ed mac is used
*/
if (softAP) {
WSL_MarshalPacket(connect, WSL_SET_SOFT_AP, 0, 0x04, 0x01, auth, crypto, 0x00, crypto, 0x00, strlen(SSID), SSID, 0x0, getDeviceMac(), 0x0044, 0x0000);
WMI_MarshalHeader(connect, 1, 1);
} else if ((auth != WSL_NET_AUTH_NONE) && (crypto != WSL_NET_CRYPTO_WEP)) {
WSL_MarshalPacket(connect, WSL_CONNECT, 0, 0x01, 0x01, auth, crypto, 0x00, crypto, 0x00, strlen(SSID), SSID, 0x0, &bss_mac, 0x0044, 0x0000);
WMI_MarshalHeader(connect, 1, 1);
} else { // if the auth mode is open, use zero_mac, and set flags to zero
WSL_MarshalPacket(connect, WSL_CONNECT, 0, 0x01, 0x01, auth, crypto, 0x00, crypto, 0x00, strlen(SSID), SSID, 0x0, &zero_mac, 0x0000, 0x0000);
WMI_MarshalHeader(connect, 1, 1);
}
AJ_InfoPrintf(("AJ_WSL_NET_connect(): CONNECT\n"));
AJ_WSL_WMI_PadPayload(connect);
//AJ_BufListPrintDumpContinuous(connect);
connectOut = AJ_BufListCreateCopy(connect);
AJ_WSL_WMI_QueueWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_NETWORK, WSL_NET_CONNECT), AJ_WSL_HTC_DATA_ENDPOINT1, connectOut);
if (softAP) {
AJ_AlwaysPrintf(("Waiting for a connection to the softAP %s\n", SSID));
memcpy(&connect_mac, (uint8_t*)getDeviceMac(), sizeof(connect_mac));
while (WSL_MacsAreEqual((uint8_t*)&connect_mac, (uint8_t*)getDeviceMac()) == TRUE) {
status = AJ_WSL_WMI_WaitForWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_NETWORK, WSL_NET_CONNECT), &item);
if (item) {
if (item->itemType == WSL_NET_CONNECT) {
AJ_InfoPrintf(("AJ_WSL_ip6config(): WORK ITEM RECEIVED\n"));
uint16_t WMIEvent;
uint32_t toss;
uint16_t channel;
WMI_Unmarshal(item->node->buffer, "quqM", &WMIEvent, &toss, &channel, &connect_mac);
} else {
AJ_WarnPrintf(("AJ_WSL_NET_connect(): BAD WORK ITEM RECEIVED\n"));
}
AJ_WSL_WMI_FreeWorkItem(item);
found = 1;
}
}
} else {
status = AJ_WSL_WMI_WaitForWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_NETWORK, WSL_NET_CONNECT), &item);
AJ_WSL_WMI_FreeWorkItem(item);
}
AJ_BufListFree(connect, 1);
return status;
}
}
AJ_EXPORT AJ_Status AJ_WSL_NET_connect(const char* SSID, const char* passphrase, WSL_NET_AUTH_MODE auth, WSL_NET_CRYPTO_TYPE crypto, uint8_t softAP)
{
AJ_Status status = AJ_OK;
wsl_scan_list* list;
list = (wsl_scan_list*)AJ_WSL_GetScanList();
AJ_WSL_NET_SetPowerMode(2);
uint8_t bss_mac[6];
// Open auth does not require you to explicitly set the BSSID so this secondary scan is not needed
if (!softAP) {
if (auth != WSL_NET_AUTH_NONE) {
AJ_Time timer;
uint8_t found = 0;
AJ_InitTimer(&timer);
while (!found) {
AJ_WSL_InitScanList(AJ_WSL_SCAN_LIST_SIZE);
AJ_WSL_SetProbedSSID(SSID, 1);
status = AJ_WSL_NET_scan();
// Some kind of scan error
if (status != AJ_OK) {
WSL_ClearScanList();
continue;
}
AJ_WSL_NET_scan_stop();
if (AJ_GetElapsedTime(&timer, TRUE) > AJ_WSL_CONNECT_TIMEOUT) {
AJ_ErrPrintf(("AJ_WSL_NET_connect() Could not find the access point %s\n", SSID));
WSL_ClearScanList();
return AJ_ERR_FAILURE;
}
// Find the SSID you want to connect to in the second scan list
if (getMacFromSSID(SSID, bss_mac, list)) {
WSL_ClearScanList();
found = 1;
break;
} else {
WSL_ClearScanList();
AJ_Sleep(AJ_WSL_CONNECT_WAIT);
continue;
}
}
if (crypto != WSL_NET_CRYPTO_WEP) {
status = AJ_WSL_NET_SetPassphrase(SSID, passphrase, strlen(passphrase));
if (status != AJ_OK) {
return status;
}
}
}
}
{
AJ_BufList* connect;
AJ_BufList* connectOut;
static const uint8_t zero_mac[6] = { 0, 0, 0, 0, 0, 0 };
uint8_t connect_mac[6];
wsl_work_item* item = NULL;
connect = AJ_BufListCreate();
/* Three different ways connect can be called.
* 1. SoftAP: The devices mac is fetched and used
* 2. Using Auth: The SSID's mac is found and used
* 3. Open auth: A zero'ed mac is used
*/
if (softAP) {
WSL_MarshalPacket(connect, WSL_SET_SOFT_AP, 0, 0x04, 0x01, auth, crypto, 0x00, crypto, 0x00, strlen(SSID), SSID, 0x0, getDeviceMac(), 0x0044, 0x0000);
WMI_MarshalHeader(connect, 1, 1);
} else if ((auth != WSL_NET_AUTH_NONE) && (crypto != WSL_NET_CRYPTO_WEP)) {
WSL_MarshalPacket(connect, WSL_CONNECT, 0, 0x01, 0x01, auth, crypto, 0x00, crypto, 0x00, strlen(SSID), SSID, 0x0, &bss_mac, 0x0044, 0x0000);
WMI_MarshalHeader(connect, 1, 1);
} else { // if the auth mode is open, use zero_mac, and set flags to zero
WSL_MarshalPacket(connect, WSL_CONNECT, 0, 0x01, 0x01, auth, crypto, 0x00, crypto, 0x00, strlen(SSID), SSID, 0x0, &zero_mac, 0x0000, 0x0000);
WMI_MarshalHeader(connect, 1, 1);
}
AJ_InfoPrintf(("AJ_WSL_NET_connect(): CONNECT\n"));
AJ_WSL_WMI_PadPayload(connect);
//AJ_BufListPrintDumpContinuous(connect);
connectOut = AJ_BufListCreateCopy(connect);
AJ_WSL_WMI_QueueWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_NETWORK, WSL_NET_CONNECT), AJ_WSL_HTC_DATA_ENDPOINT1, connectOut);
if (softAP) {
AJ_AlwaysPrintf(("Waiting for a connection to the softAP %s\n", SSID));
memcpy(&connect_mac, (uint8_t*)getDeviceMac(), sizeof(connect_mac));
while (memcmp((uint8_t*)&connect_mac, (uint8_t*)getDeviceMac(), 6) == 0) {
status = AJ_WSL_WMI_WaitForWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_NETWORK, WSL_NET_CONNECT), &item, AJ_TIMER_FOREVER);
if (item && (status == AJ_OK)) {
if (item->itemType == WSL_NET_CONNECT) {
AJ_InfoPrintf(("AJ_WSL_NET_connect(): WORK ITEM RECEIVED\n"));
uint16_t WMIEvent;
uint32_t toss;
uint16_t channel;
WMI_Unmarshal(item->node->buffer, "quqM", &WMIEvent, &toss, &channel, &connect_mac);
} else {
AJ_WarnPrintf(("AJ_WSL_NET_connect(): BAD WORK ITEM RECEIVED\n"));
}
AJ_WSL_WMI_FreeWorkItem(item);
}
}
} else {
status = AJ_WSL_WMI_WaitForWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_NETWORK, WSL_NET_CONNECT), &item, AJ_TIMER_FOREVER);
if (item && (status == AJ_OK)) {
AJ_WSL_WMI_FreeWorkItem(item);
}
}
AJ_BufListFree(connect, 1);
return status;
}
}
AJ_Status AJ_WSL_ipconfig(uint32_t mode, uint32_t* ip, uint32_t* mask, uint32_t* gateway)
{
AJ_Status status = AJ_ERR_DHCP;
uint16_t ipv6[8] = { 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 };
wsl_work_item* item = NULL;
switch (mode) {
case (IPCONFIG_QUERY):
{
AJ_InfoPrintf(("AJ_WSL_ipconfig(): IPCONFIG_QUERY\n"));
AJ_BufList* ipconfig;
ipconfig = AJ_BufListCreate();
WSL_MarshalPacket(ipconfig, WSL_SOCKET, WSL_SOCK_IPCONFIG, 0x60, 0, ip, mask, gateway, &ipv6, &ipv6, &ipv6, &ipv6, 0, 0, 0, 0);
WMI_MarshalHeader(ipconfig, 1, 1);
AJ_WSL_WMI_PadPayload(ipconfig);
AJ_WSL_WMI_QueueWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_IPCONFIG), AJ_WSL_HTC_DATA_ENDPOINT1, ipconfig);
{
status = AJ_WSL_WMI_WaitForWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_IPCONFIG), &item);
if (item) {
if (item->itemType == AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_IPCONFIG)) {
AJ_InfoPrintf(("AJ_WSL_ipconfig(): WORK ITEM RECEIVED\n"));
uint16_t WMIEvent;
uint32_t reserved;
uint32_t _command;
uint32_t _handle;
uint32_t _error;
uint32_t _mode;
WMI_Unmarshal(item->node->buffer, "quuuuuuuu", &WMIEvent, &reserved, &_command, &_handle, &_error, &_mode, ip, mask, gateway);
if (ip != 0) {
status = AJ_OK;
}
} else {
AJ_WarnPrintf(("AJ_WSL_ipconfig(): BAD WORK ITEM RECEIVED\n"));
}
}
}
}
AJ_WSL_WMI_FreeWorkItem(item);
break;
case (IPCONFIG_STATIC):
AJ_InfoPrintf(("AJ_WSL_ipconfig(): IPCONFIG_STATIC\n"));
AJ_BufList* ipconfig_dhcp_static;
ipconfig_dhcp_static = AJ_BufListCreate();
WSL_MarshalPacket(ipconfig_dhcp_static, WSL_SOCKET, WSL_SOCK_IPCONFIG, 0x60, 1, ip, mask, gateway, &ipv6, &ipv6, &ipv6, &ipv6, 0, 0, 0, 0);
WMI_MarshalHeader(ipconfig_dhcp_static, 1, 1);
AJ_WSL_WMI_PadPayload(ipconfig_dhcp_static);
//AJ_BufListPrintDumpContinuous(ipconfig_dhcp_static);
AJ_WSL_WMI_QueueWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_IPCONFIG), AJ_WSL_HTC_DATA_ENDPOINT1, ipconfig_dhcp_static);
status = AJ_WSL_WMI_WaitForWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_IPCONFIG), &item);
AJ_WSL_WMI_FreeWorkItem(item);
AJ_Sleep(1000);
break;
case (IPCONFIG_DHCP):
AJ_InfoPrintf(("AJ_WSL_ipconfig(): IPCONFIG_DHCP\n"));
AJ_BufList* ipconfig_dhcp;
ipconfig_dhcp = AJ_BufListCreate();
WSL_MarshalPacket(ipconfig_dhcp, WSL_SOCKET, WSL_SOCK_IPCONFIG, 0x60, 2, ip, mask, gateway, &ipv6, &ipv6, &ipv6, &ipv6, 0, 0, 0, 0);
WMI_MarshalHeader(ipconfig_dhcp, 1, 1);
AJ_WSL_WMI_PadPayload(ipconfig_dhcp);
AJ_WSL_WMI_QueueWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_IPCONFIG), AJ_WSL_HTC_DATA_ENDPOINT1, ipconfig_dhcp);
status = AJ_WSL_WMI_WaitForWorkItem(0, AJ_WSL_WORKITEM(AJ_WSL_WORKITEM_SOCKET, WSL_SOCK_IPCONFIG), &item);
AJ_WSL_WMI_FreeWorkItem(item);
AJ_Sleep(100);
break;
}
return status;
}
