void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
u32 base_rate = 48000;
if (!dig || !dig->afmt)
return;
/* there are two DTOs selected by DCCG_AUDIO_DTO_SELECT.
* doesn't matter which one you use. Just use the first one.
*/
/* XXX: properly calculate this */
/* XXX two dtos; generally use dto0 for hdmi */
/* Express [24MHz / target pixel clock] as an exact rational
* number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE
* is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator
*/
if (ASIC_IS_DCE3(rdev)) {
/* according to the reg specs, this should DCE3.2 only, but in
* practice it seems to cover DCE3.0 as well.
*/
WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 50);
WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
} else {
/* according to the reg specs, this should be DCE2.0 and DCE3.0 */
WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate * 50) |
AUDIO_DTO_MODULE(clock * 100));
}
}
/*
* enable the HDMI engine
*/
void r600_hdmi_enable(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset;
u32 hdmi;
if (ASIC_IS_DCE6(rdev))
return;
/* Silent, r600_hdmi_enable will raise WARN for us */
if (dig->afmt->enabled)
return;
offset = dig->afmt->offset;
/* Older chipsets require setting HDMI and routing manually */
if (rdev->family >= CHIP_R600 && !ASIC_IS_DCE3(rdev)) {
hdmi = HDMI0_ERROR_ACK | HDMI0_ENABLE;
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
WREG32_P(AVIVO_TMDSA_CNTL, AVIVO_TMDSA_CNTL_HDMI_EN,
~AVIVO_TMDSA_CNTL_HDMI_EN);
hdmi |= HDMI0_STREAM(HDMI0_STREAM_TMDSA);
break;
case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
WREG32_P(AVIVO_LVTMA_CNTL, AVIVO_LVTMA_CNTL_HDMI_EN,
~AVIVO_LVTMA_CNTL_HDMI_EN);
hdmi |= HDMI0_STREAM(HDMI0_STREAM_LVTMA);
break;
case ENCODER_OBJECT_ID_INTERNAL_DDI:
WREG32_P(DDIA_CNTL, DDIA_HDMI_EN, ~DDIA_HDMI_EN);
hdmi |= HDMI0_STREAM(HDMI0_STREAM_DDIA);
break;
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
hdmi |= HDMI0_STREAM(HDMI0_STREAM_DVOA);
break;
default:
dev_err(rdev->dev, "Invalid encoder for HDMI: 0x%X\n",
radeon_encoder->encoder_id);
break;
}
WREG32(HDMI0_CONTROL + offset, hdmi);
}
if (rdev->irq.installed) {
/* if irq is available use it */
radeon_irq_kms_enable_afmt(rdev, dig->afmt->id);
}
dig->afmt->enabled = true;
DRM_DEBUG("Enabling HDMI interface @ 0x%04X for encoder 0x%x\n",
offset, radeon_encoder->encoder_id);
}
/*
* disable the HDMI engine
*/
void r600_hdmi_disable(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset;
if (ASIC_IS_DCE6(rdev))
return;
/* Called for ATOM_ENCODER_MODE_HDMI only */
if (!dig || !dig->afmt) {
return;
}
if (!dig->afmt->enabled)
return;
offset = dig->afmt->offset;
DRM_DEBUG("Disabling HDMI interface @ 0x%04X for encoder 0x%x\n",
offset, radeon_encoder->encoder_id);
/* disable irq */
radeon_irq_kms_disable_afmt(rdev, dig->afmt->id);
/* Older chipsets not handled by AtomBIOS */
if (rdev->family >= CHIP_R600 && !ASIC_IS_DCE3(rdev)) {
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
WREG32_P(AVIVO_TMDSA_CNTL, 0,
~AVIVO_TMDSA_CNTL_HDMI_EN);
break;
case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
WREG32_P(AVIVO_LVTMA_CNTL, 0,
~AVIVO_LVTMA_CNTL_HDMI_EN);
break;
case ENCODER_OBJECT_ID_INTERNAL_DDI:
WREG32_P(DDIA_CNTL, 0, ~DDIA_HDMI_EN);
break;
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
break;
default:
dev_err(rdev->dev, "Invalid encoder for HDMI: 0x%X\n",
radeon_encoder->encoder_id);
break;
}
WREG32(HDMI0_CONTROL + offset, HDMI0_ERROR_ACK);
}
dig->afmt->enabled = false;
}
/*
* enable the HDMI engine
*/
void r600_hdmi_enable(struct drm_encoder *encoder, bool enable)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
u32 hdmi = HDMI0_ERROR_ACK;
if (!dig || !dig->afmt)
return;
/* Silent, r600_hdmi_enable will raise WARN for us */
if (enable && dig->afmt->enabled)
return;
if (!enable && !dig->afmt->enabled)
return;
/* Older chipsets require setting HDMI and routing manually */
if (!ASIC_IS_DCE3(rdev)) {
if (enable)
hdmi |= HDMI0_ENABLE;
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
if (enable) {
WREG32_OR(AVIVO_TMDSA_CNTL, AVIVO_TMDSA_CNTL_HDMI_EN);
hdmi |= HDMI0_STREAM(HDMI0_STREAM_TMDSA);
} else {
WREG32_AND(AVIVO_TMDSA_CNTL, ~AVIVO_TMDSA_CNTL_HDMI_EN);
}
break;
case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
if (enable) {
WREG32_OR(AVIVO_LVTMA_CNTL, AVIVO_LVTMA_CNTL_HDMI_EN);
hdmi |= HDMI0_STREAM(HDMI0_STREAM_LVTMA);
} else {
WREG32_AND(AVIVO_LVTMA_CNTL, ~AVIVO_LVTMA_CNTL_HDMI_EN);
}
break;
case ENCODER_OBJECT_ID_INTERNAL_DDI:
if (enable) {
WREG32_OR(DDIA_CNTL, DDIA_HDMI_EN);
hdmi |= HDMI0_STREAM(HDMI0_STREAM_DDIA);
} else {
WREG32_AND(DDIA_CNTL, ~DDIA_HDMI_EN);
}
break;
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
if (enable)
hdmi |= HDMI0_STREAM(HDMI0_STREAM_DVOA);
break;
default:
dev_err(rdev->dev, "Invalid encoder for HDMI: 0x%X\n",
radeon_encoder->encoder_id);
break;
}
WREG32(HDMI0_CONTROL + dig->afmt->offset, hdmi);
}
if (rdev->irq.installed) {
/* if irq is available use it */
/* XXX: shouldn't need this on any asics. Double check DCE2/3 */
if (enable)
radeon_irq_kms_enable_afmt(rdev, dig->afmt->id);
else
radeon_irq_kms_disable_afmt(rdev, dig->afmt->id);
}
dig->afmt->enabled = enable;
DRM_DEBUG("%sabling HDMI interface @ 0x%04X for encoder 0x%x\n",
enable ? "En" : "Dis", dig->afmt->offset, radeon_encoder->encoder_id);
}
/*
* update the info frames with the data from the current display mode
*/
void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mode)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
u8 buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE];
struct hdmi_avi_infoframe frame;
uint32_t offset;
uint32_t acr_ctl;
ssize_t err;
if (!dig || !dig->afmt)
return;
/* Silent, r600_hdmi_enable will raise WARN for us */
if (!dig->afmt->enabled)
return;
offset = dig->afmt->offset;
/* disable audio prior to setting up hw */
dig->afmt->pin = r600_audio_get_pin(rdev);
r600_audio_enable(rdev, dig->afmt->pin, false);
r600_audio_set_dto(encoder, mode->clock);
WREG32_P(HDMI0_AUDIO_PACKET_CONTROL + offset,
HDMI0_AUDIO_SAMPLE_SEND | /* send audio packets */
HDMI0_AUDIO_DELAY_EN(1) | /* default audio delay */
HDMI0_AUDIO_PACKETS_PER_LINE(3) | /* should be suffient for all audio modes and small enough for all hblanks */
HDMI0_60958_CS_UPDATE, /* allow 60958 channel status fields to be updated */
~(HDMI0_AUDIO_SAMPLE_SEND |
HDMI0_AUDIO_DELAY_EN_MASK |
HDMI0_AUDIO_PACKETS_PER_LINE_MASK |
HDMI0_60958_CS_UPDATE));
/* DCE 3.0 uses register that's normally for CRC_CONTROL */
acr_ctl = ASIC_IS_DCE3(rdev) ? DCE3_HDMI0_ACR_PACKET_CONTROL :
HDMI0_ACR_PACKET_CONTROL;
WREG32_P(acr_ctl + offset,
HDMI0_ACR_SOURCE | /* select SW CTS value - XXX verify that hw CTS works on all families */
HDMI0_ACR_AUTO_SEND, /* allow hw to sent ACR packets when required */
~(HDMI0_ACR_SOURCE |
HDMI0_ACR_AUTO_SEND));
WREG32_OR(HDMI0_VBI_PACKET_CONTROL + offset,
HDMI0_NULL_SEND | /* send null packets when required */
HDMI0_GC_SEND | /* send general control packets */
HDMI0_GC_CONT); /* send general control packets every frame */
WREG32_OR(HDMI0_INFOFRAME_CONTROL0 + offset,
HDMI0_AVI_INFO_SEND | /* enable AVI info frames */
HDMI0_AVI_INFO_CONT | /* send AVI info frames every frame/field */
HDMI0_AUDIO_INFO_SEND | /* enable audio info frames (frames won't be set until audio is enabled) */
HDMI0_AUDIO_INFO_UPDATE); /* required for audio info values to be updated */
WREG32_P(HDMI0_INFOFRAME_CONTROL1 + offset,
HDMI0_AVI_INFO_LINE(2) | /* anything other than 0 */
HDMI0_AUDIO_INFO_LINE(2), /* anything other than 0 */
~(HDMI0_AVI_INFO_LINE_MASK |
HDMI0_AUDIO_INFO_LINE_MASK));
WREG32_AND(HDMI0_GC + offset,
~HDMI0_GC_AVMUTE); /* unset HDMI0_GC_AVMUTE */
err = drm_hdmi_avi_infoframe_from_display_mode(&frame, mode);
if (err < 0) {
DRM_ERROR("failed to setup AVI infoframe: %zd\n", err);
return;
}
err = hdmi_avi_infoframe_pack(&frame, buffer, sizeof(buffer));
if (err < 0) {
DRM_ERROR("failed to pack AVI infoframe: %zd\n", err);
return;
}
r600_hdmi_update_avi_infoframe(encoder, buffer, sizeof(buffer));
/* fglrx duplicates INFOFRAME_CONTROL0 & INFOFRAME_CONTROL1 ops here */
WREG32_AND(HDMI0_GENERIC_PACKET_CONTROL + offset,
~(HDMI0_GENERIC0_SEND |
HDMI0_GENERIC0_CONT |
HDMI0_GENERIC0_UPDATE |
HDMI0_GENERIC1_SEND |
HDMI0_GENERIC1_CONT |
HDMI0_GENERIC0_LINE_MASK |
HDMI0_GENERIC1_LINE_MASK));
r600_hdmi_update_ACR(encoder, mode->clock);
WREG32_P(HDMI0_60958_0 + offset,
HDMI0_60958_CS_CHANNEL_NUMBER_L(1),
~(HDMI0_60958_CS_CHANNEL_NUMBER_L_MASK |
HDMI0_60958_CS_CLOCK_ACCURACY_MASK));
WREG32_P(HDMI0_60958_1 + offset,
HDMI0_60958_CS_CHANNEL_NUMBER_R(2),
~HDMI0_60958_CS_CHANNEL_NUMBER_R_MASK);
/* it's unknown what these bits do excatly, but it's indeed quite useful for debugging */
WREG32(HDMI0_RAMP_CONTROL0 + offset, 0x00FFFFFF);
WREG32(HDMI0_RAMP_CONTROL1 + offset, 0x007FFFFF);
WREG32(HDMI0_RAMP_CONTROL2 + offset, 0x00000001);
WREG32(HDMI0_RAMP_CONTROL3 + offset, 0x00000001);
/* enable audio after to setting up hw */
r600_audio_enable(rdev, dig->afmt->pin, true);
}